Items where Subject is "T Technology > T Technology (General)"

Allan, Soon Chan Roong (2015) Design And Implementation Of A Laboratory-scale Single Axis Sun Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Ze Ming Bryan (2015) Design And Construction Of A small Scale Underwater Vehicle With Obstacle Avoidance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Rizhuan , Othman (2007) Design For Die Casting (Spanner). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rauf , Abdul Kadir (2006) The Development Of Solar Energy Collector For Stirling Engine To Obtain An Optimum Produced Power. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aw, Aaron Teik Hong (2008) Design & Development Micromouse For Robot Competition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bernardette , Louisa Francis Ting (2008) Design And Development Of Accumulator For Domestic Water System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamsari , Che Long (2008) The Development Of 3D Animation Story Title Guli Using Lip-Sync Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jurik Riguh, Ahras (2009) Design And Development Of Automated Sorting Recycle Bin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Chee Yoong (2010) Optimization Of Machining Parameters In Turning Process Of Aluminum Alloy 6063. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Yong Lim (2015) Design And Development Of Sustainable Filament Extruder For 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azizul , Hamdan (2006) Alat Bantuan Pembelajaran Mikropengawal MCS51. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shah , Abd Rahman (2007) Robotic Arm Spy Tanker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Sofiuddin, Khidir (2007) CS8 Humanoid Robot (LEG 1). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adam, Sepee (2008) Robot Automatik Menggunakan Motor Penginjak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanafiah, Nawi (2009) PC Based Controller For Home Automation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mahathir , Mohd Daim (2007) Feasibility Study Of Product Localization: A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nizar , Manshor (2009) Design Analysis Of A Press Machine For Disposable Pet Bottle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salihin , Hj Abd Rahim (2007) The Study Of Eccentricity Of Circular Tube Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Isminhazwan , Ismail (2008) DC To DC Converter Using CMOS. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Jamli, Mohd Ali (2008) Analysis Of Sawmill Workers Through Integration Of Video Observation And RULA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Afiq, Nik Mohd Arif (2011) Analytical Study On Control Of Buckling Lobe Onset For Hollow Rectangular Tube Under Axial Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Emafazreen, Mohd Yatim (2008) Design A Bipedal Walker Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Perly , Peh Thai Lee (2010) Intelligent Vacation Planner System Using Ant Colony Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rajandran , Morthui (2007) Intelligent Car Parking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raudhah , Zainal Rashid (2013) Thermal insulation particle board made with sugarcane bagasse fiber, kenaf core powder reinforced with polypropylene. Project Report. UTeM, Melaka. (Submitted)

Sani Irwan, Md Salim and Abdul Shukur, Jaafar and Azlishah, Othman (2010) The Design and Develop for Control Home Appliancse Via Internet (COHAVI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hajar , Abd Rahman (2008) A Study On Hardness Of Porcelain Body Sintered At Various Temperatures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Shakiroh , Mohamad Ismail (2007) Designing An Interactive Telephone Based Remote Control And Alarm System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong , Francis Ch'ng Kang (2007) Automatic Fish Feeder For Cultivation Pond. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yuvarajan , Karathihayan (2013) Modelling of palm fibre polypropylene composite for randomly distributed fibre reinforcement. Project Report. UTeM, Melaka. (Submitted)

Zaid Fikri, Md Salleh (2015) Design And Development Functional Prototyping Formula SAE Knuckle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

'

'Adilah, Mohd Arifin (2012) Digital Folklore Storybook For Android Apps: "Al-Kisah Puteri Santubong Dan Puteri Sejinjang". Project Report. UTeM, Melaka, Malaysia. (Submitted)

'Aishah, Hassan (2013) Fabrication Of Activated Carbon Filled Epoxidized Natural Rubber Composite Via Solvent Casting Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

A Azizi, Nurul Shafika (2016) Comparison study on the effect of double pogo pin and single pogo pin in the IC package production. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

A Gani, Nurfarahin (2023) Optimization of kretschmann-surface plasmon resonance biosensor based on multi-walled carbon nanotube using taguchi method. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

A Rahman, Roslina (2016) Optimization Of A Race Car Top Speed During An Event In Virtual Formula. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A Sulaiman, Noor Anisah (2019) Drive Right: Driving Simulation To Alert The Driver Using Artificial Intelligence For Prudential Driving Behaviour. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

A'zizi, Abdul Rahman (2016) Preparation And Characterization Of Paraffin-Poly (Ethylene Glycol) Composites As Form-Stable Phase Change Materials For Thermal Energy Storage Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A. Hamid, Mas Eliya (2016) Pet Feeder System Using Android Apps. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A. Jalil, Hanisah Nadiah (2015) Design And Simulation Of In-Pipe Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A. Kadir, Syahdan Amirul (2016) Friction And Wear Preventive Characteristic Of Biolubricant Derived From Waste Cooking Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A. Perumal, Puvanasvaran and Abdul Hamid, Mohd Syaiful Rizal and Tang, Sai Hong and Syed Mohamed, Muhammad Syafiq and Tay, Choo Chuan and Chong, Kuan Eng (2018) Quantification Of Customer Demand In Overall Equipment Effectiveness And Its Standardization In Continual Production Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A. Ravindran., Arjun (2018) Circular Composite Tubes Under Quasi-Static Axial Loading. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

A.B.M Shafiul, Azam and Ahmad Jamal, Salim and Abdul Hamid, Hamidon (2005) A Field Programmable Gate Array Based High Resolution Pulse Programmer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A.Fadzil, Nur Fazreeha Ameelya (2017) The Optimization Of Cold Metal Transfer (CMT) Welding Process Parameters On 5052 Aluminium Alloy Tensile Strength Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

AL-Hadhrami, Riadh Abdul Rahman (2017) Investigation Of Minimum Water Consumption At PCB Manufacturing Industry Using Water Pinch Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Aziz, Muhammad Azraei (2017) Development Of IoT Smart Home Controller Using Biosensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab Aziz, Muhammad Farriez Eskandar (2022) Development of vehicle tracking and monitoring system based on IoT. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ab Aziz, Nurfairuz Atiqah (2016) Microcontroller Based Communication Aid System For Disabled People. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Ghani, Ahmad Fuad and Mohd Daud, Mohd Ahadlin and Md Zahir, Nur Aizatul 'Ain (2018) Optimization Of Carbon Fiber Reinforced Polymer And Glass Fiber Reinforced Polymer Using Analytical Hierarchy Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab Ghani, Ahmad Raihan (2019) Hybrid Pi And Fuzzy Logic Speed Controller Strategy For Induction Motor Drive. Project Report. Faculty of Electrical Engineering, Melaka, Malaysia. (Submitted)

Ab Ghani, Muhamad Hilmie (2016) Automotive Aerodynamic Energy Harvesting From Front Bumper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Halim, Nabilah (2017) Effects Of Boronizing On Sharp Cornered Metal Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Latif, Norhazlia (2017) Conceptual Design And Fabrication A Novel Energy Harvester For Malacca River. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Malik , Ibrahim (2007) Persamaan Kinematik Dan Dinamik Untuk Robot Rhino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahim, Muhammad Saiful Ridzwan (2016) Significant Effect Of Galvanneal Metal Sheet To The Quality Of Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahim, Muhammad Syakir (2017) An Experimental Investigation Of Performance And Gasseous Exhaust Emission Of A Diesel Engine Using Blends Of A Vegetable Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahim, Siddiiq (2017) Investigation On Turbine Blade's Performance By Using 3-Dimensional CFD. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ab Rahman, Fateihah (2017) Investigation Of Tribological Performance Of Waste Lubricating Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahman, Mohd Khairul (2017) Development Of Grip Strength Monitoring System For Stroke Patient. Project Report. UTeM, Melaka. (Submitted)

Ab Rahman, Nur Aqilah (2016) Driving And Hindering Factors In Developing Pico-Hydro Generation System In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahman, Nur Aqilah (2016) Driving And Hindering Factors In Developing Pico-Hydro Generation System In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahman, Saeman (2009) Development Of Automated Satay Assembly Mechanism Using Gear Design Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Raof, Muhammad Ridzwan (2022) Development of green stove portable biomass power solution based on IoT. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ab Rashid, Mohd Zamzuri and Mohd Shah, Hairol Nizam and Sulaiman, Marizan and Ismail, Zool Hilmi (2017) A New Controller Approach Using Mixed Linear Quadratic Gaussian (LQG) / H-Infinity To Improve Trajectory Tracking Of Nonholonomic Non Wheel System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razab, Huzaimah (2017) A Study On Tensile Properties Of Acrylnitrile Butadiene Styrene (ABS) Subjected To Thermal Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razak, Muhammad Nur Asyraf (2016) Effect Of Oil Palm Trunk (OPT) And Oil Palm Frond (OPF) Fiber To Physical And Mechanical Properties Of Polyurethane (PU). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razak, Nur Hasinah (2016) Numerical investigation on different penetration angle in bone drilling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab Wahab, Muhammad Tarmizi (2019) Design And Fabrication Of Oil-Water Separation System With Hydrophobic Coating Wire Mesh Filter For Grease Trap. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab. Aziz, Nur Adlina (2016) Design Of Single Phase H-Bridge Multilevel Inverter By Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab. Basir, Amirul Ayady (2021) Plasma induced air flow on passenger car spoiler. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab. Hadi, Ahmad Syukran (2019) Automated paper cutter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab. Hakim, Ab. Halim (2009) Kajian Tentang “Menambahbaikan Sistem Brek Letak Kereta Elektrik Untuk Kereta Penumpang”. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab. Kadir, Norkhuzaimah (2014) Analysis on the robotics chip mounter performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab. Majid, Aliah (2020) Preparation And Characterization Of Modified Polyaniline- Graphene Nanoplatelets (PANI I GNPs) Nanocomposites Via Acid Protonation Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab. Rahim, Muhammad Ashraf (2019) Tribological Studies On Ultra High Molecular Weight Polyethylene With Palm Kernel Shell In Dry Condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab. Razak, Muhammad Amirul Asyhraf (2017) Development Of Solar Based Water Circulation Machine For UTeM Lake. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab.Rahman, Ahmad Wahi (2018) Effect Of Node Enhancement On Strength Of Body-Centered-Cubic (BCC) Polymer Lattice-Structure Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abadi, Mesiran (2012) Investigation Of Soil Resistivity Base On Design Of An Experiment Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abang Abdul Razak, Dayang Ma’asitah (2022) Mechanical properties and failure analysis of Bemban fibre reinforced thermoplastic matrix composite. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abang Ahmad, Abg Muhd Fakhrullah (2022) Effects of kenaf fibre surface treatment to the mechanical properties of recycled polypropylene composites. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abang Let, Abang Mohd Elna Fiqri (2017) Facial Characteristic Of Product Preferences Based On Phi Approach Towards Aesthetics. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abbdul Faiz, Anuar (2013) Effect Of Injection Machine Parameters On The Warpage Of Dumbbell Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Azis, Muhammad Taufiq (2019) A Project On Ball And Concave Jig Attachment For Lathe. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Kadir (2006) Structural Design And Analysis Of Sewerage Inspection Crawler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aziz, Amni Najihah (2022) Development of an IoT based laundry notification system with rain water sensor for clothline using microcontroller. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abd Aziz, Azrul Muhaimin (2017) Generating Electricity From Tyre Rotation System Using Statistical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aziz, Ihsan Fikri (2017) Development Of Automatic Healthcare System By Using GSM For Paralysis Patient. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Muhammad Alif (2015) Electroless quaternary Ni-Co-Cu-P deposition on Fe substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Muhammad Fahmi (2018) Mechanical Properties Of Coconut Fibre Reinforced Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Muhammad Syahril (2017) Development Of Small Portable Air Conditioner By Peltier Module. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Norfarhana (2016) Effects Of MWCNTS Surface Modification On The Thermal And Mechanical Properties Of Epoxy Filled MWCNTS Nanocomposites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aziz, Syazxerlin (2017) Line balancing using lean manufacturing tools at balloon packaging department. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Ghafar, Abdullah Ariff (2017) Development Of Portable Lifter To Lift Outdoor Unit For Split Type Air-Conditioning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Ghaffri, Abd Halim (2008) Permodelan Dan Analisis Pelanggaran Kereta. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Ghani, Khawarizmi Khairul Anuar (2018) Development Of A Guide Drone Using RF Energy Harvesting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Hadi , Abd Malik (2007) Control Of An Inverted Pendulum Comparison Between PID Controller And SFC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Halim, Mohamad Kamarul Nizam (2015) Modelling of thin wall machining with tabular helix end mill. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Hamid, Mohd Sofian (2017) The Effect Of Slat And Flap To The Aerodynamics Performance Of An Airfoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Hamid, Muhammad Haziq (2017) Experimental Investigation On The Effect Of Fuel Temperature On The Performance Of Spark Ignition Engine With Hydrogen Peroxide-Gasoline Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Harith, Abd Halim (2015) Gas Detector For Safety Home Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Jakfar, Nur Syiefa (2017) Study On Sandwich Structure Using Banana Pseudo-Stem Frp As Skin Material For Environment Sustainability. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Jalil, Muhammad Aiman (2019) Performance Analysis Of Microwave Imaging System For Different Microwave Sensors. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Karim , Ummi Ramizah (2016) A 2.45 GHz Wearable Antenna Using Conductive Graphene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Lah, Akmal (2015) Establishment Of New Standard Time For The Manufacturing Of Hot-Dip Galvanized Steel Of Tenaga Nasional Berhad (TNB) Concrete Pole Accessories. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Latif, Muhammad Fadzilan (2017) The development of portable in-situ open circuit potential test cell. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Majid, Noor Akmal (2016) Development Of High Tech Electricity System In Agriculture Field. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Majid, Nur Izzati (2017) A Study On Bending Properties Of Acrylonitrile Butadiene Styrene (ABS) Subjected To Thermal Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Majid , Darsano and Prof Madya Abdul Rani, Othman and Redzuan, Abdul Manap (2008) Design Fabricate And Measurement Of Linear Power Amplifier For Communication Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Majid , Bachuk (2009) Mini Solid State Tesla Coil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Manaf, Amirul Hamim (2022) Evaluation of the electrical energy efficiency of the new faculty of manufacturing engineering, UTeM building through light intensity analysis. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abd Manaf, Edeerozey and Mohamad, Noraiham and Munawar, Rose Farahiyan and Shamsuddin, Zurina and Abd Latif, Mohd Juzaili (2018) Thermoformability Study Of Oil Palm Shell Derived Carbon Black-Kenaf (OPS-KENAF) Thermoplastic Lightweight Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Manaf, Rumaisa (2016) Case Study Effect Of Temperature On The Nanoparticle Stability Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Manap, Nurulfajar and Sulaiman, Riza and Darsono, Abd Majid and Mat Ibrahim, Masrullizam and Hairol , Izzuddin (2017) Enhanced Image View Synthesis Using Disparity Depth Extraction For Efficient Performance In Stereo Vision Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Mudtalib, Nur Elina Shahrina Amza (2017) Synthesis of graphene nanoplatelets using chemical vapour deposition and waste cooking oil as carbon feedstock. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Muin, Najihah (2017) Influence Of The Work Hardening On Springback Of The U-Bend 316L Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rafar, Mohd Din Arshad (2008) Design Validation And Development Of A 6 Axis Robot Components. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Abdul Fattah (2016) Development Of Linear Positioning Table For Drilling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Abdul Fattah and Mohd Saleh, Afferry and Sidek, Siti Nurfarhana and A. Bakar, Munirah and Wan Ismail, Wan Syarma Adila (2017) Advanced Machining (BETP 3584) Project Arm Link Aerostructural Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Mohammad Safwan (2017) Design And Fabrication Of An In House Automotive Wheel Rim Testing Equipment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahim, Muhamad Amirul Syukri (2019) Development Of Parking Information System By Using IoT Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahim, Muhammad Mustaqim (2017) Development Of IoT Wheelchair For Rehabilitation. Project Report. UTeM, Melaka. (Submitted)

Abd Rahim, Nur Syaheeda (2018) Route Optimization In Printed Circuit Board Holes Drilling Process Using Teaching Learning Based Optimization Algorithm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahim, Rosman and Kok, Swee Leong and Lau, Kok Tee and A Aziz, Khairul Azha and Mustaffa , Izadora (2017) Model And Experimental Verification Of Hydrodynamic Coupling Piezoelectric Cantilever In Different Viscoelastic Environments. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahim , Muhamad Akliff (2016) Design And Development Of Microstrip Array Antenna At 28 Ghz. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Rahim (2009) Design Optimization Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Mohd Shamsul Izhar (2017) Design And Analysis Of The Suspension System For The Agricultural Smart Mover With Using Total Design Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Muhammad Aizuddin (2016) Development Of Water Floating Nano Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Muhammad Khorruddin (2017) Smart Street Lighthing On Highway. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Nadia Adriena (2016) Effect of injection moulding parameters on material characteristic of two plate mould with different material using flow analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Najiah Atira (2018) Barriers and motivation of the solid waste management among manufacturing companies in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Najwa (2017) Development Of Surveillance System Using Raspberry Pi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Nor Nabilah (2019) Design And Development Of Automated Wire Cutter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Nur Awaliah (2015) Assessing a system reliability: a case study in arm rear axle assembly. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Razakuan (2015) Design of laboratory information and management system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Zammeri (2014) Machining simulation of composite materials using engineering simulation software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rama, Nur Syafiqah (2017) Development Of A Smart Baby Stroller Using Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rashid, Abd Rahim (2015) Pemanas Air Solar Kos Rendah Untuk Kegunaan Domestik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rashid, Abdul Aliff Rahim (2016) Kajian Ultra Kapasitor Ke Atas Motor Elektrik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rashid, Muhammad Hazim (2015) Automating the production of the automotive retainer using the rotary indexing mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rashid, Nur Umiza (2016) Nano Hybrid of MWCNTs/GNPs filled epoxy nanocomposites for structural application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rashid, Nurul Syahfiqah (2019) Development Of Remote Terminal Unit (RTU) For Power Quality Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rasid, Jaafar (2009) Study And Analysis The Effectiveness CAD-CAM System In Mold Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Abd Halem (2011) Comparison Of Sand Casting Surface Roughness And Dimension Accuracy Between Aluminium Silicon Carbide And Tin Silicon Carbide. Project Report. UTeM, Melaka. (Submitted)

Abd Razak, Muhammad Hafiz (2009) Design Of The Robust Gripper Control For Hoisting Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Ammar Fikri (2018) Design and development of rotary jigs. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Razak, Jeefferie (2018) Enhancing Thermo-Mechanical Properties Of Nano-Modified Polymer Composite Material By Modification Of CNT Surface. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Razak, Mohamad Izreen (2017) Application Of Converted Mode For Defect Defection In Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Muhammad Amir Zahid (2022) Development of fall detector using NodeMCU for elderly people. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abd Razak, Muhammad Izzul Afandi (2016) Development Of Solar Powered Water Sensor To Monitor Water Quality For Fish Farm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Safiah (2017) Bandwidth And Gain Enhanced Of Patch Antenna With Metamaterial Waveguide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Salam, Adam (2009) Mereka Bentuk Platfom Keselamatan Untuk Kerja-Kerja Membuka Dan Menutup Kanvas Lori. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Salleh, Mohamad Syazuan (2017) Study Of Cabin Temperature Of The Car Parked Under Various Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Samad, Mohd Adha (2019) Design And Improvement Emergency Brake System For Motorcycle Under 150cc. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Samat, Muhammad Nizam (2015) Investigation Of Nozzle Height Of Abrasive Water Jet Machining On Mild Steel Gear Surface Cutting Parallelism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Sukor, Abdul Aziem (2015) Design Of Grease Trap For Wastewater Management System Using Pugh Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Sukor, Siti Marsyidah (2016) The Comparison Study Of Handgrip Pressure On Steering Wheel National Cars (PROTON & PERODUA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Talib, Mohamad Syahaqil (2018) Study On Impact Of Several Types Of Metals In Simultaneous Tire Wrench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Wahab, Mohd Syafiq (2019) Grasping Motion Control Of A Robotic Hand Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Wahab, Nik Muhamad Amirul Iqwan (2018) Home Automation Using Power Line Networking And RF Remote Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Wahid, Syakira (2017) Development Of Car Temperature Cooling Control By Using Magnet Code. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Yazid, Nurul Shuhadah (2016) Effect of Poly Vinyl Alcohol (PVA) on the size of Linseed Oil (LO) microcapsule self-healing coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Zamhuri, Mohammad Huzer (2016) Rekabentuk Dan Simulasi Turbin Angin Paksi Menegak Pada Kelajuan Angin Rendah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Bashir, Aimaduddin Azfar (2018) Design Optimization Of External Coolant Filter For Metal Machining Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Halim, Wahidah and Jidin, Auzani and Mohamad Razali, Azziddin and Azri, Maaspaliza and Rosli, Omar (2018) Low Switching Frequency Modulation Method For Optimal Minimization Of The Total Harmonic Distortion In Multilevel Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Halim, Zakaria (2011) Automatic Room Temperature Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Kadir, Mohammad Sallehudin (2017) Development Of HVAC Damper Temperature Controller Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd. Samad, Hasan Basari and Zuraida , Abal Abas and Nanna Suryana, Herman (2009) Development Of Prototype Tool For Heat Transfer Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Wahid, Mohamad Nabil Aiman (2019) Development Of IoT Conservatory Monitoring And Control System For Rock Melon Farm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdillah, Azfar Solihin (2017) Mereka Bentuk Dan Fabrikasi Mesin Pemprosesan Bagi Penghasilan Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdo Dargan, Abdo Saif (2023) Detecting SYN flood attack with snort ids through signature-based detection and its impact on network performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Tamaldin, Noreffendy and Mat Tahir, Noor Ayuma (2019) Synthesis Of Grapheme Film From Palm Kernel Activated Carbon Using Chemical Vapor Deposition For Durability Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdollah, Mohd Fadzli and Harun, Mohamad Hafiz and Hashim, Muhammed Noor and Ab Aziz, Azhar and Md Alis, Muhamamd Aizat (2018) Physical Property Modification Of Vegetable Oil Based Lubricant Using Zinc Ion Derivatives. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul 'Alim, Abdullah (2009) Remote Sensing Walker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Afiq Arifin, Khairuddin (2014) Developing Mesh Network To Extend Wifi Coverage Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Afri, Mohd Nor Zamani (2016) Application Of Fiber Optic Sensor For Sodium Hypochlorite Concentration Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Alif, Abdul Aziz (2011) A Feasibility Study Of 3D Printer Parameters Optimization By Using Bamboo Powders. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Amin, Muhammad Harith Aizad (2019) Development Of Waste Heat Recovery Unit For Passenger Car By Using Thermoelecric Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Azim, Roslan (2010) An Application Of 3D Modelling And Simulation Analysis In The Development Of Consumer Product Design (Folding Bicyle). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Azim, Abdul Rahim (2008) WCDMA Simulation For Transmitter Part And BER Performance In AWGN, Rayleigh Channel And Rician. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Azim, Mat Salleh (2009) Surface And Sub Surface Analysis When Hard Turning Of AISI D2 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Rozi (2010) Analysis And Measurement Of Optical Fiber Channel Doubler (OFCD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Aida Nazifa (2018) Investigation Of Coverlay Adhesion By Acrylic-Based Adhesive On Copper-Polyimide Laminate For Flexible Printed Circuit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Azri Shah (2018) Study On Extreme Pressure (EP) Properties Of SN0W20 Grade Engine Oil With Different Type Of Nanoparticles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Mohamad Adib (2020) Optimal Design For Production Of Green Diesel From Integrated Oil Palm Biomass Derived Alcohols Bio-Refinery. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Mohamad Azim (2017) Fabrication Of Electronic Fuel Injector Tester For Education Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Mohd Azrin (2009) Energy Efficiency Enhancement At FKE Administration Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Farah Azwani (2018) Material Selection For Natural Fibre Composite Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Hafizah (2016) Investigate The Viscosity Of Used Engine Oil Before And After Filtration And Enhance By Nanoparticles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Liana (2017) Optimization Of Tribological Performance For Purify Engine-Oil Enhance By Nanoparticles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Syafiqah (2017) Design And Development Of Fly-Mosquito Trapping Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nurul Hidayah (2019) Effect Of Sintering Temperature And Soaking Time On Microstructure And Mechanical Properties Of Alumina-Chromia Cutting Tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nurul Saqinah (2017) Development Of Emergency Pack For Camper By Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Qayyum Edlee (2016) Propose An Optimum Periodic Supervision On Conventional Shearing Machine At Power Booster Engineering & Maintenance Sdn Bhd Using Reliability Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Sallehuddin Kaus (2018) Design And Analysis For Development Of Portable Air Cooler Using Phase Change Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Bari, Arif Imran (2019) Design Of Hydrodynamic Body Structure For Autonomous Underwater Vehicle Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Basit , Kamaludin (2013) Pembentukan mendapan bahan bakar diesel dan bio-diesel pada suhu permukaan melebihi suhu Kadar Pengewapan Maksimum (MEP). Project Report. UTeM, Melaka. (Submitted)

Abdul Faiz , Abdul Rohim (2009) Develop The SCADA System For Automatic Fish Feeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Fattah , Mohd Tahir (2008) Effect Of Air Arrangement On Wood Combustion Through CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Gaffar, Muhammad Sayyid (2017) Investigation Of Load Bearing Capacity On Different Bio-Lubricant Enhance By Nanoparticles Using Extreme Pressure Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Gani, Ahmad Shafiq (2016) Designing Air Filtration Test Rig (Prototype) In Evaluate Efficiency Of HVAC Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Garapar, Abdul Rahiman (2017) Study Of Glass Tint Effectiveness As Heat Resistant In Buildings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Ghaffur , Mohammad Mohsin (2009) Soft Switching Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Ghani, Mohamad Nur Zahir (2016) Development Of Smart Monitoring Parking System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Ghapar, Muhammad Faez (2017) Characterization Of A Wideband Nonlinear Vibration Absorber Using Curved Constrained Cantilever Beam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hadi, Nur Aisyah (2016) Redesign Material Handling System By Using Ergonomic Approach To Reduce Back Pain Risk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Abd. Halin (2012) Performance Analysis Of Zigbee-Based Wireless Viral Advertisement System For Land Public Transport. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Mohd Tamezer (2012) Optical Soliton In Long Haul Telecommunications With Fiber Loss Factor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Ab Aziz (2009) Vehicle Handling Improving By Active Steering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Abd Hamid (2010) Air Conditioning System Powered By Small Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz , Hashim (2013) To determine alkaline catalyst for the jatropha oil biodiesel production. Project Report. UTeM, Melaka. (Submitted)

Abdul Hafiz , Abdul Hamid (2007) Osciloskop Digital Berasaskan Komputer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz , Mamat (2009) Ultrasonic Range Finder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Haji, Mohd Faiz (2008) Design And Development Of Shimless Pump Footing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakam, Mohd Ridza (2010) Effect Of Particle Size And Fuel Type On Solid Waste Combustion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakim, Masod (2009) Mobile Campus Alert Notification System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakim, Rohhaizan (2009) Investigation Of Pressure And Temperature Cause By From Turbo System In Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakim, Harun (2009) Design Of Automatic Cage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakim, Nur Raihana (2019) Improvement Of Production Line Flexibility Through Rapid Changeover Via Time Reduction Of Internal Activities. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Abdul Jamal (2012) Rekabentuk Dan Fabrikasi Struktur Dadan Mobiliti Pengangkutan Peribadi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Mohd Mustaffa (2012) Stability Control For Quadcopter With An Autonomous Flight System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Abdul Qayyum (2016) Water Bill System Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Anisyahida (2016) Development A New Gear Oil Sensor Using Fiber Optic Sensor For Engine Functional Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Hafrizah Ashidah (2009) Transmitter And Receiver For Intelligent Speed Limiter System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Harith Hilman (2019) Thermal And Mechanical Properties Of Thermoplastic Cassava Starch/Beeswax Reinforced With Cogon Grass Fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Mohd Dzahir (2015) Cutting technology and sintering jig development for manufacturing of hollow structure mat. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Muhammad Firdaus (2019) Improvement Of Hygienic Urinal System Using Integrated Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Mustafa (2012) Smart Automatic Dual Function Lawn Mower With Infrared And Metal Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Nor Faizah (2017) The Optimization Of Friction Stir Welding Parameter For Aluminium 5052 By Using Full Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Tiara Natasya (2019) Voltage Based Coordinating Controller Modelling And Performance Analysis For Islanded Renewable Energy System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim , Mustafa (2007) Investigation Of Microstrip Parallel Couple Wideband Filter (WCDMA Application). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hameed, Mohamed Aslam (2016) Optimisation Of Tyre Pressure And Fuel Type Towards Fuel Efficiency Using Design Of Experiment Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Abdul Muaz (2019) Liquid Level Controller System Without Contact. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Abdul Wafi (2017) Effects of solvent on TiO2 sol-gel thin films. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Hafieza (2016) Solar Powered Fish Feeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Hamidon and Guan, Soo Yew and Norizan , Mohamad and Sani Irwan, Md Salim and Zahariah, Abdul Manap (2005) Industrial Application Of PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Hartini (2008) Design Of 240V Square Wave Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Mohamad Hazrik (2015) Insulation Monitoring Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Muhammad Aminudden (2019) Design And Fabrication Three-Wheels Electrical Balancing Scooter For Disable Person. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Nursheda (2016) The human analysis and ergonomics for the driver seat design of a tractor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Nurul Athirah (2019) Development Of Machine Element Of Teaching Aid For Secondary School. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid , Hamidon and Siti Huzaimah , Husin and Yusmarnita , Yusop and Siva Kumar , Subramaniam (2011) Real-Time Public Transportation Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid , Mohd Syaiful Rizal and Chew, Boon Cheong and A.Perumal, Puvanasvaran and Mohd Noor , Khairul Baharein and Shamsuddin, Alina and Hanafi , Zulkifli and Mohd Idris, Mohd Fadzil and Choong, Chien Khay (2018) Preventing Technological Disaster Through Risk Assessment Protocol (RAP) Development For Malaysia High Tech-High Risk Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid., Samsiah (2016) Optimizing Traffic Light System For Emergency Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hasif, Abdul Halim (2010) A Study On Short Term Load Forecasting Using Back Propagation Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hayyan, Abdul Halim (2010) The Study Of E6013 Electrode Effect On Microstructure Of Difference Mild Steel Thickness By Using Arc Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Helmyruddin, Ab Rahman (2005) Conceptual Designing 20 MW Diesel Engine Power Plant For A Remote Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Jabbar, Aseran (2012) UTeM MPP Voting System Using SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Jabbar , Zamri (2013) Smart day and night lighting system using solar light ray reflection and deflection. Project Report. UTeM, Melaka. (Submitted)

Abdul Jafar, Nurul Syuhadah (2023) Real-time water quality monitoring using IoT near brackish water area in Sungai Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Jalil, Muhammad Asyraf (2015) Evaluation and sensitivity analysis for selecting the best design of automotive fender using analytic hierarchy process (AHP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Jalil, Muhammad Hafizzul Saffuwan (2017) Design and development of a checking fixture for an automotive press part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Kadir, Aida Fazliana (2017) A New Algorithms Of Time-Frequency Analysis Technique For 3-Phase Voltage Source Inverter Faults Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Luqman Nulhakim (2022) Development of water surface garbage collector machine with solar power. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abdul Kadir, Mira Asyikin (2016) Welding Patterns Influence On The Joining Strength Of Mild Steel Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Mohd Hakim Naqiuddin (2019) Development Of Third Brake Light And Signal System For Motorcycle Helmet. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Kadir, Muhamad Fitri (2018) Development of value stream mapping for palm oil company : a case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Kadir, Muhamad Syazwan (2019) Position Control Of Electro-Hydraulic System Using PID-MRAC Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Kadir, Muhammad Afiq (2019) The development of a smart plant monitoring system using IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Kadir, Nor Asyraf (2016) Tribological Studies Of Bio-Lubricants On Plastics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Nur Marina (2018) Development Of Automatic Washroom Light And Purifier Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kapor, Muhammad Farhan (2016) Blade Parameters Analysis On The Performance Of Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Karim, Shamihah (2011) Simultaneous Decision Of Car's Battery Using Analytical Hierarchy Process At The Conceptual Design Stage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Karim, Kasrul and Bugis, Ismadi and Abdullah, Abdul Rahim and Mohd Jamil, Mohd Luqman and Jidin , Auzani and Ahmad Tarusan, Siti Azura (2017) Independant Control Scheme For Sub-Bearing Permanent Magnet AC Motor Drive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Khalid, Husni Azmal (2016) Design And Analysis Of Electric Bicycle For Disable Person. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latef, Muhammad Syazwan (2017) Design Of Water Filter System Containing Rice Husk And Kapok Fiber For River Trash Collector System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latif, Mohd Faruq and Aziz, Azwan and Zahmani, Qamar Fairuz and Hashim, Muhammed Noor and Ali, Adlan and Nordin, Abd Khahar and Harun, Mohamad Hafiz (2019) Automated Carpet Washing Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Latif, Shahida (2016) A design and development of rain-sensing auto window closure for home. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Latiff, Luqman Rashidi (2018) Design Circular Polarized Antenna With Multilayer Metasurface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latiff, Muhammad (2016) Renewable Energy Technology : AIRco Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latiff, Nurain (2019) Design Web Based For Monitoring In Online Probrand Clothing Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latiff, Nurizzatul Zahirah (2018) Investigation Of Coverlay Adhesion By Epoxy-Based Adhesive On Copper-Polyimide Laminate For Flexible Printed Circuit. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Latip, Shekh Faisal and Abu, Nor Azman and Ahmad, Rabiah and Hussin, Burairah and Z'aba, Muhammad Reza and Zainal Abidin, Zaheera (2019) Improved Techniques For Cryptanalysis Of Lightweight Block Ciphers Using Statistical, Algebraic And Side-Channel Methods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Majid, Burhanuddin (2015) Design A New Bionic Arm To Assists Paralyze Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Majid , Ali (2008) Autonomous Maintenance Programme For Milling Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Malek, Asnawi (2018) Design And Development Of Platform For Large Object 3D Printer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Malik, Abdul Hafeez (2015) Basic Design And Performance Analysis Of Micro-Hybrid Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Malik, Yusuf (2010) Design And Development Of Autonomous Robot Using Digital Fiber Optic Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Manah, Syed Ahmad (2017) The Development Of Noise Analyzer System And Data Reliability Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Manan, Khairul Adlan (2009) Multiple Output Chargers For Portable Appliance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Manap, Muhamad Naim Fahmi (2017) Investigation of tool wear and surface roughness when machining AISI 1045 with CIP pressed ceramic cutting tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Mu'in, Haz'zaid (2012) Modelling And Study Of Femur Bone Under Normal loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Mu'iz, Abdul Hamid (2015) Anthropometric Characteristics Of Technology Campus Students And Their Relationship With Existing Bus Stop Bench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Muhaimin, Abdul Latiff (2015) High Power Inverter In Ambulance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Muhaimin, Mohd Yusri (2015) Quality improvement through lean six sigma approach at wooden picture frame moulding company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Muhaimin , Mohd Shafie (2013) Wasted Heat Recovery System : How To Gain Energy. Project Report. UTeM, Melaka. (Submitted)

Abdul Munaf, Raziyah Maznah (2016) Reactive Power Planning Using Evolutionary Programming For IEEE 26-Bus. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Munaf, Raziyah Maznah (2016) Reactive Power Planning Using Evolutionary Programming For IEEE 26-Bus. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Munajat, Nurain (2016) Cleaner Production Implementation In Palm Oil Mill. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Munir, Muhammad Syafiq (2017) Thermal Stress Analysis On Disc Brake Rotor For NGV Vehicle By Using Finite Element Analysis (ANSYS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Murad, Mohamad Farhan Azhar (2018) Numerical Study Of Engine Air Intake Airflow Performance On Commercial Bus (Pioneer Coach Builder). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Mutalib , Abdul Hamed (2008) Modeling And Experimental Identification Of Magnetic Clutch. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Nasir, Muhammad Asif Asyraf (2020) Development Of A Machine To Assist Wheelchair Users To Board A Bus. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Paizal, Mohd Zain (2015) Analysis Of Preventive Maintenance For Processing Plant (Gassification Process Unit). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Qadir, Osama (2018) Fuzzy Logic Speed Control For Induction Motor Drives. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rafeq, Saleman and Musthafah, Mohd Tahir and Mohd Azman, Abdullah and Mohd Juzaila, Abd. Latif and Muhammad Zahir, Hassan and Syahibudil lkhwan, Abdul Kudus and Muhd Ridzuan, Mansor and Fudhail, Abd Munir (2012) Design And Fabrication Of A Race Car Vehicle For UTeM Formula Varsity 2012. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Raheem, Abdul Mueezz (2018) The Effect Of Carbon Nanotube Aspect Ratio On The Functional Properties Of Electrically Conductive Adhesives. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Abdullah and Fara Ashikin, Ali and Fazdli, Patkar and Mohd Luqman, Mohd Jamil (2011) Design Of Simulation Packages For Parameters Estimation Of AC Motor Drives And Load. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Samsudin and Sivarao, Subramaniam (2007) Investigation Of Laser Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Jaafar (2015) Study Of Selected Properties Of Low Density Alloy After The Heat Treatment Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Mohd Aliff Mukmin (2018) Productivity improvement through TPM adoption on printing machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Mohd Huzaif (2016) A Study On The Potential Of Peltier In Generating Electricity Using Natural Resources. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Muhammad Atikkullah (2017) Design And Development Wind Turbine Generator By Using Arduino. Project Report. UTeM, Melaka. (Submitted)

Abdul Rahim, Muhammad Rafiq (2017) Design and development of vision guided height adjustable conveyor platform on automated guided vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Samsudin and Sivarao, Subramonian and Gannapathy, Vigneswara Rao and Wahyono Sapto, Widodo and Safiza Suhana, Kamal Baharin (2013) E-Preventive Maintenance Warning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Suhaiza (2016) The Development Of Online Monitoring System Prototype For Tigris Conservation Center. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Suhaiza (2016) The Development Of Online Monitoring System Prototype For Tigris Conservation Center. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim , Samsudin and Sivarao, Subramoniam (2007) Experimental Investigation Of Burr Formation In Drilling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Abdul Ghani (2012) Comparison On Data Driven Algorithms To Maintain Color Constancy In Industrial Camera For High Intensity Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Ahmad (2013) Design And Analyse The Configuration Of Earthing System Based On High-Low And Low-High Soil Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Aini Azirah Sofea (2018) Design And Development Of Portable Lactate Storage By Applying Peltier Module As Energy Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Mej Mohd Yazi (2016) FPGA Implementation Of AES Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Muhammad Syahir Afif (2017) Harmonic Minimization Of A Single Phase Cascaded H-Bridge Multilevel Inverter. Technical Report. UTeM, Melaka. (Submitted)

Abdul Rahman, Muhammad Syahir Afif (2017) Harmonic Minimization Of A Single Phase Cascaded H-Bridge Multilevel Inverter. Technical Report. UTeM, Melaka. (Submitted)

Abdul Rahman, Nabil Haikal (2017) Development And Optimization Of Portable Vacuum Clamping. Project Report. UTeM, Melaka. (Submitted)

Abdul Rahman, Noor Farahana (2017) Applications Of Open-Source CAE Tools In Mechanical Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Nor Nabilah Syazana (2016) Automatic Computer Vision System For Industrial Product Quality Inspection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Nurul Amirah (2017) Surface finish improvement using retraction method for fused deposition modeling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahman, Sarni Nur Atikah (2015) Development Of Heating, Ventilating And Air Conditioning (HVAC) Control Monitoring System (CMS) Using Arduino Microcontroller In Poultry House Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman , Abdul Malek (2008) Design And Development Of Sofa Bed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman , Mat Rejab (2010) Develop Heating System Using By Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman Hanif, Bahar (2009) Investigation On Withstand Voltage Of Silicone Rubber In Various Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahmat, Abdul Luqman Hakim (2023) Development of excel based VBA application for GCPV system design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rani, Othman and Chairulsyah, Abdul Wasli (2010) 5.8 GHz Low Noise Amplifier for Front End Receiver. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Othman and Mohd Nor, Husain and Mohammad Syahrir, Johal (2011) Design of Low Noise Amplifier Using Cascode And Cascaded Techniques WiMAX IEEE 802.16 Standards. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Hanisah (2018) Design Of Automatic Cat Feeder With Cat's Weight Detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rani, Mohamad Hakim (2017) Development Of GPRS Signal Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Muhammad Haris (2016) Development Of Flexible Clamping For Drilling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Othman and Chairulshah, Wasli (2006) Development Of A 2.4GHz Antenna Arrays Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani , Othman and Chairulsyah, Wasli (2006) Development Of A 2.4GHz Antenna Arrays Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani , Othman and Chairulsyah, Wasli (2005) Development Of A 2.4GHz Band Pass Filter Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Abdul Jalil (2012) Merekabentuk Dan Menganalisis Kipas Penghembus Kenderaan Penumpang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Abdul Azim (2016) Incorporating Flywheel Hybrid Module In Motorcycle : A Conceptual Design Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Ahmad Hafizzuhdi (2016) Design An Automated Guided Vehicle (AGV) Point To Point Motion Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Muhammad Faiz Haiqal (2016) Optimization study on process condition of durian shell pulping towards hydrophobicity. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razak, Ahmad Tarmizi (2009) Kajian Terhadap Kekuatan Rekabentuk Tangki Gas Petroleum Cecair (LPG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Abdul Rahman (2010) Mobile Robot Multiple Sensor Behaviour For Obstacle Avoidance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Amir Ashraf (2018) Design And Implementation Of LiDAR Navigation System For An Automated Guided Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Eza Shaheda (2016) The Study Of Measurement Error In Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Hanim and Salehuddin, Fauziyah and Shaari, Sahbudin and Haroon, Hazura and Mohd Zain, Anis Suhaila and Md Shah, Wahidah (2017) Enhanced Mach Zehnder Interferometer (MZI) Optical Modulator On Silicon-On-Insulator (SOI) Using Tapered Structure For Improved Performance In Wavelength Division Multiplexing (WDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Afiq (2019) To Study The Heat Insulation From Engine Toward Bus Interior. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Aniq (2016) Development Of Remote Monitoring Room Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Asyraf (2016) Leftover Rice Starch From Food Waste To Bio-Based Plastic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Ridhwan (2016) Influence Of Aluminium And Copper On Thermal Ageing Of Synthetic Ester Oil (MIDEL 7131). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Razak, Nur Amiera Ashraf (2017) Analysis Performance Of Fiber Optic Sensors In Fully Synthetic Engine Oil Monitoring System With Different Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Nur Awanis (2017) Controller Design For Nonlinear Motorized Prosthetic Hand System. Project Report. UTeM, Melaka. (Submitted)

Abdul Razak, Nurul Ameera (2017) Development Of Fiber Optic Sensor For Semi-Synthetic Engine Oil Performances With Different Concentrations. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razak , Shaari (2007) Roboclimb. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak , Bahtrem (2007) Proses Fabrikasi Dan Pencirian Bahan Komposit Laminat Untuk Industri Kapal Terbang. Project Report. UTeM, Melaka. (Submitted)

Abdul Razali, Nurul Wahida (2014) Enhancing Quality Management System Through Continuous Quality Improvement Practices In Malaysian Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razi, Muhammad Haidhir Firdaus (2017) A Development Of Motorcycle Engine Oil Performance Monitoring System Using Fiber Optic Cable. Project Report. UTeM, Melaka. (Submitted)

Abdul Razi, Muhammad Helmi Farid (2015) Study Of Resistance Spot Welding For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rizal, Jokariah (2009) Design And Development Of EGGS Grading And Storing Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rob, Muhammad Faiz (2016) A Study On Machining Strategies For Thin-Walled Five-Axis Pocketing Profile : Aero-Structural Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Samat, Abdul Hafiz (2017) Select And Install Engine For Agricultural Smart Mover. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Syukor, Mohd Jaya and Yogan, Kumar and Ruzaidi, Zamri (2009) Optimization of Hard Turning Machining Parameters Using Swarm Intelligence Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Talib, Din and Mustafar, Kadir and Roslina Aida , Rahimi and Fauzi, Khamis (2013) The Study on the Characteristics and Limitations of Pneumatic Lift for the Building of 4 Storey and Below, for the Development of a Low Cost and Safe Pneumatic Personal Lift. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Talib, Azreen Shafira (2022) Design and evaluation of test rig for measuring hip flexor strength in standing position. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abdul Talib, Din and Mohd Yazid, Othman and Mohd Yuhazri, Yaakob (2012) The Design And Development Of Water Wheel For Power Generation At UTeM's Main Campus Recreational Lake. Project Report. UTeM. (Submitted)

Abdul Talib , Din and Shamsul Anuar, Shamsuddin and Mohd Yusoff , Sulaiman and Dora, Ursee (2007) The Design Of A Cost-Saving Air Conditioning System Using Earth Cooled Dehumidification Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahab, Muhamad Hafiz (2016) Automation Deflashing System For Blow Moulded Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahab, Muhamad Syafiq (2017) The Model Of Deforming Mode Tube Under Axial Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahab, Muhammad Azam (2018) Development Of Vehicle Blind Spot Detection System Using FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahab, Muhammad Zikri Hakimi (2019) Development Of In-Cabin Intelligent Safety System Against Carbon Monoxide. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Wahab, Nurfarahin (2018) The study of MRT commuter's satisfaction of MRT services at Sungai Buloh-Kajang line. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Wahab, Zulfanizam (2019) Development Of Science Project For Sekolah Padang Temu. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Wahid, Muhammad Ja’far As-Shadiq (2022) Vibration analysis of electric shaver mechanical system using statistical analysis method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Wahid, Nadia Mazwa (2017) Effect of repair welding on pipes with dissimilar materials. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Zali, Muhammad Ridzuan (2017) Investigation Of Energy And Cost Effectiveness Between Electric Water Heater And Energy Harvested From 1.0 HP Air Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdulghani Mohammed, Saeed Mohammed (2017) Comparison Of Linear And Intelligent Control For A Nonlinear Electro-Hydraulic Actuator Systems. Project Report. UTeM, Melaka. (Submitted)

Abdulhadi Hasan, AlJoumah (2016) Design And Development Of Planar Antenna For GSM Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdull Hanif , Abdull Rahman (2013) Microstructural Study On Different Type Of Biodiesel Fuel For Automotive. Project Report. UTeM, Melaka. (Submitted)

Abdull Jalil, Amir Shahiran (2019) Tribological Analysis Of Steel Against Steel Contact Under Extreme By Using Different Types Of Anti-Wear And Friction Additives. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Radzie (2012) Mengkaji Daya Seretan (Drag Force) Terhadap Rak Bumbung (Roof Box) Kereta Bersaiz Kompak Dengan Menggunakan Kaedah Eksperimen (Terowong Angin). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Aina Athira (2020) Effect Of Valve Flow Coefficient (Cv) To The Propulsion System Of Hydro-Pneumatic Hybrid Driveline. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Asma Nor Hidayah (2016) Systematic Development Of Injection Mold : A Convocation Souvenir. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Fatin Nadia (2017) Experimental Investigation On Mechanical Properties Effect For Different Orientation Of Kenaf Fiber Composite Through Tensile And Impact Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Hatzrill Moestaqim (2018) Optimized PID Controller Parameters Tuning Using Teaching Learning Based Optimization Algorithm For Controlling Actuator Position. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Iqmal Aizad (2015) Development of data acquisition platform for retrieving ergonomic parameter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Mohamad Aiman Zafir (2023) Development of a visual information system using VB.NET (Automotive Industrial Automation). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abdullah, Mohammad Amirul (2016) Product Development Of Smart Soap Making Machine For Home Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Mohd Fairuz (2017) Fabrication Of Emergency Tyre Inflator Generated From Motorcycle Exhaust Gas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Mohd Helmi (2015) Development of portable water hammer accumulator for domestic water system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Erwan Shah (2016) Temperatured-Controlled Device For Medical Application Using Peltier Effect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Hafiz (2016) Study Of Fluid Flow In Junction Of Car Washer Tube Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Sharifuddin (2017) The Effect Of Thermal Processing On The Properties Of Reclaimed Carbon Fibre. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Syazwan (2015) Application of axiomatic design and additive manufacturing : a case study of a door knob. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Noor Izzati (2018) Design And Simulate Water Vapor Flow In Heat Exchanger By Varying Pitch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Nor Fazliyana (2015) Design and analysis of the optimum gate size for multi-cavity plastic name card injection mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nordianaaida (2015) Convolution design profile toward kansei engineering. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nur Fatin Hanani (2019) Investigation On The Effects Of Electrospinning Distance And Applied Voltage On Morphology Of Poly (Lactic Acid) Electrospun Nanofibres. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nur Suhaida (2016) Experimental Investigation On Coconut Fibre Composition Profiling With Respect To The Modulus Of Rigidity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Nurfarahizzah (2016) Design And Analysis Safest Encryption Television Signal Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Nurul Atika Afifa (2016) Monitoring Energy Meter System By IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Nurul Fatehah (2018) Influence of swelling media and soaking parameter to the physical properties of natural rubber/EPDM nanocomposites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nurul Saadah (2016) Potential Study : Development Of Rainfall's Gravitational Force Based On Power Generation For Urban Area In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Siti Amirah (2020) Effect Of Various Temperature On Graphene Based Conductive Ink. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah Firdaos, Mohd Lidin (2008) Natural Gas Vehicle (NGV) Engine Performance Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Helmee, Suki (2008) Inexpensive PLC Input Port Expansion Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Kamil, Puteri Eliani Fikri (2017) Layout analysis and improvement in a manufacturing industry : a case study. Technical Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah Muttaqin, Adam Shukri (2007) Merekabentuk Struktur Dan Mekanisma Untuk Pemasangan Jig Pencengkam Pada Mesin Ujian Tegangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Sani, Nor Azfar (2016) Design and development of vehicle security device by using biometric identification (fingerprint). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah Sani, Nor Syaima' (2014) 5S Implementation In Malaysian Manufacturing Industry : What's New? Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdulwahid Mohammed Aldhubhani, Saeed Abdulhalim (2018) An Implementation Of Fuzzy Controller For Micro-Gripper (MEMS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abidin, Roziah (2008) Investigation Of Inter Material Shear Properties Of Iron And Stannum. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abidin, Nor Amalin (2018) Development Of Multilevel Car Parking System Based On Car Sizes. Project Report. UTeM, Melaka. (Submitted)

Abidin, Siti Nuratiqah Aliana (2017) Development Of Plant Moisture Monitoring System Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu , M. Wahidullah and Marizan, Sulaiman and Mohammed, Irfan (2005) Preliminary Building Automation System For Energy Auditing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Ahmad (2011) Analysis The Future Application Of Renewable Energy On Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Muhamad Najmi (2012) A Study On TNB Load Reading Prediction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Abdul Muhaimin (2018) Photographic Observation For Treeing And Tracking For Detecting Line To Ground Fault. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Hafizul Aliff (2017) DC Motor Speed Control Using Measured Distance By Ultrasonic Sensor. Project Report. UTeM, Melaka. (Submitted)

Abu Bakar, Mohamaad Syafiq (2016) Automation Deflasher Mechanism For Blow Moulded Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Mohd Fairuznizam (2017) Flat plastic part optimization in injection moulding of pure polypropylene and polypropylene with talc using Taguchi method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Mohd Nazrin Nashriq (2016) Analysis Air Pressure Inside Ducting System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Muhamad Hairee Izwan (2018) Analysis and validation of workstation design for mechanical assembly department in aero-composite industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Muhammad Azad (2017) Conversion Of Go-Kart To E-Kart Mounting Design And Fabrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Noor Farah Iddayu (2016) Formation of iron oxide nanostructure by thermal oxidation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Norazhar and Rahim, Nor Hidayah and Sutan Chairul, Imran and Ab Ghani, Sharin and Zainuddin, Hidayat and Mohamad, Noraiham and Hanaffi, Farhan and Muhammad, Nor Asiah and Abdul Aziz, Mohd Azhar (2018) A Fundamental Study Of Oxidation Stability Behaviour On Natural Ester Oil Mixed With Optimum Antioxidants For Power Tranformer Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Norisfarina (2018) Study On Waste Glass Milling For Feldspar Replacement In Ceramic Tile. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Nur Shakira Suhana (2018) Energy Harvesting From Mechanical Vibration Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Nurmishyar Shuhada (2023) Threshold voltage and leakage current analysis on 14NM double gate bi-graphene PMOS device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Sabariah (2016) Effect of polycation additive on electrophoretic deposition of surface functionalized boron nitride particles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Siti Amira (2016) Occupational Safety And Health Management : Potential Risk Of Electrical Hazard At Construction Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Firaz, Shamshul Kamal (2012) Simple Mobile Ordering System For Restaurant Within Wi-Fi Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Hanifah, Amirul (2019) Development And Analysis Of Low-Cost Smart Security And Tracking System For Motorcycle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hanifah, Hariz (2017) Introduction Of Double Gyroscope Concept For Motorcycle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hanipah, Siti Aishah (2016) Energy Pricing Optimization By Using Neural Network (NN) For Demand Site Tariff Strategy Peninsular Malaysia Case Study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hanipah, Siti Aishah (2016) Energy Pricing Optimization By Using Neural Network (NN) For Demand Site Tariff Strategy Peninsular Malaysia Case Study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hassan, Nurul Aisyah Syamimi (2018) Design And Evaluation Of Bus Aircond Ducting System For Betterment Using Numerical Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Hassan, Nurul Ismahani Adilah (2021) Preparation and characterization of SiR-EPDM filled with waste glass powder (WGP) rubber blend composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hurairah, Azman (2005) Current Comparison Scheme In TNB Transmission Line System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Kamal, Muhammad Azril Hilmi (2019) Design And Develop Intelligent Lighting System Integrated With PV Solar. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Khir, Abu Bakar (2009) Design Of An Intelligent Switch For Low Voltage Distribution System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Musa Asha'ari, Mohd Sarif (2008) Uncertainty Measuring and Evaluating the Measurement of Gauge Block by Universal Measuring Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Naeem, Abdul Bahar (2013) Express Sole Dryer (ESD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Seman, Zulfariz (2016) Automotive Exhaust Thermoelectric Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Talib, Siti Aznur (2016) Continuous Water Level Control Using Ultrasonic Sensor With 45 Degree Cut Pipe Insertion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Ubaidah, Abdul Aziz (2009) Design And Development Of Robot Interface For Controlling 6 DC Motor Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abul Jalil, Mujahidah (2016) Round nose bullet design using high-profile curve definition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Achmad Umar, Baraja (2013) The Enhancement Of UTeM International Student Website : How Content Can Be Presented Using Minimalist Responsive Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Achuan, Pharawus (2019) The Influence Of Blade Parameters Configurations On The Performance Of Thrust Power For AUV Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adam, Nur Ashikin (2018) Investigation of mechanical properties and microstructure when processing alumina-based cutting tool under different pressure using cold isostatic pressure (CIP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adam, Nur Wardah (2018) Thermal, Physical And Environmental Friendly Characteristics Of Bio Based Composites Derived From Sugarcane Fibre And Potato Starch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adam Farhan, Mohd Dasril (2013) Development Of Motor Speed Control System By Using Acceleration Characteristic At Forearm For Remote Control Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adam Maleck , Hamid (2008) Part Combination Of Design For Assembly (DFA) Using Flow Analysis (EFA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Addam , Paat (2009) Light Tracking Device For Solar Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adeline, Lukar Herlino (2012) An optimal Adaptive Traffic Signal Control Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adenan, Muhammad Muizzudin (2016) Numerical Simulation Of Incompressible Flow Of Different Types Of Fluid In A T-Junction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adenan, Nur Solihah (2023) Study of vibration on defects in cordless impact hand drill using statistical analysis method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adi, Saptari and Zuhriah, Ebrahim (2007) A Human Vision Sensitivity Analysis For Designing Better Human Machine Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi , Saptari and Seri Rahayu , Kamat and Wan Hasrulnizzam , Wan Mahmood and Isa, Halim (2005) Analysis Of Workstation Design In Assembly Line For Small Scale Electric Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi Adli, Bahtiar Affandi (2012) Analizing Induction Motor Variables (Voltage Angular Velocity, And Efficiency) To Compare Between Nelder-Mead Method And Powell’s Method Of Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi Alif, Azim Ng (2012) Design, Development, And Fabrication Of Urinal Health Checking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi Amri, Ruzman (2015) Human Movement Support Using Radio Frequency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi Asharie, Sani (2008) Router Monitoring via SMS System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adib , Md Jusoh (2006) Evaluating And Planning For Facilities Compliance OSHA's Ergonomic Regulation In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adibah, Azman (2014) Smart Anti-Abduct System (Theme Park) Using Radio Frequency Identification (RFID). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adibah , Abu Bakar (2009) RFID Smart Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adibah , Hasanuddin (2009) Software Development For Induction Motor Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adibah Hanun, Mohd Arif (2015) Design, Analysis And Simulation Of Casting Defect On Water Pump Housing Using Casting Simulation Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adilah, Abu Samah (2011) Study Of Design Consideration And Performance Analysis Of Substrate Integrated Waveguide Components. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adiyana, Sukor (2011) An Investigation Of Human Factor Engineering And Human Behavior On Productivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adli, Abdullah Izuddin (2022) Simulation of the drilling analysis on machining characteristics towards carbon steel using the respond surface methodology (RSM). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Adli Zil Ikram , Abdullah (2013) Analysis the i beam subjected to three point loading or bending for different material. Project Report. UTeM, Melaka. (Submitted)

Adnan, Hassan (2010) Simulation Study On Active Ambulance Stretcher. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Mohammad Noor Khairul Azrin (2008) Design And Development Of Cctv Using Webcam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Ahmad (2009) An Automatic Pouring Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Ahmad Sallehuddin (2017) Design And Development Of Dough Proofer Machine For SMI Bakery Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Anis Adrina (2018) Microwave Transesterification Of Waste Cooking Oil (WCO) Using Waste Cockles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Anis Azwa (2017) Development Of Automated Key Management System Using LabVIEW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Muhamad Nur Hadi (2015) Machining performance of titanium alloy Ti-6Al-4V in milling operation using CVD carbide insert. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adnan, Muhammad Aidil (2015) Manufacturing complexity characterization: case study at Micro-Nano Precision Sdn. Bhd. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adnan, Nor Farahin Aida (2018) Process optimization to improve surface finish in fused deposition modeling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adnan, Norsyafiqah (2019) Investigation On Single Fibre Strength From Reclaimed Carbon Fibre (rCF) For Secondary Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adnan, Nur Afiqah (2022) Influence of nano-reinforced particles on the mechanical properties of aluminium metal matrix composite fabricated by cooling slope casting. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Adnan, ZainalFirdaus (2018) Development Of Smart Vehicle Blind Spot Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adrin, Davian Ivan (2023) Development of HYDROQS detachable mini portable conveyor – Structure and lifting mechanism. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ady Izwan , Omar (2007) Video Graphic Array (VGA) Generator Using Complex Programmable Logic Device (CPLD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adzizol , Abdul Karim (2009) Design And Development Of Ultra-Wideband Wireless Tranmission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afandi, Abd Latif (2011) Application Of Material Selection On Bumper Fascia Based On Design For Sustainability (DfS) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afandi, Muhammad Akif Irfan (2019) Experimentation Of Mode Shape Curvature Algorithm Using Accelerometer For Damage Detection In Aluminium 6061. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Afandi, Nurul Fahimah (2023) Structural integrity assessment of cable structure : From laboratory to industry. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Afandi, Siti Fatimah (2017) Muscle Activity Analysis Using Surface Electromyography (sEMG) For Passenger While Riding Moving Train In Prolonged Stand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afda Rizan, Ismail (2005) Manual Wheelchair Design Improvements And Developments. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afeeqa, Abd Ghani (2015) Cutting Tool Parameter Optimization For Surface Roughness Of Mild Steel Material Using Taguchi Methodt. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Affendi , Hussin (2008) Design, Analysis And Fabricate Of Pressure Vessel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Afidatul Nadia, Mok Hat (2012) Simulation Of Worldwide Interoperability For Microwave Access (WiMAX) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afifah, Mohd Fauzi (2010) The Implementation Of Risk Management At Aerospace Manufacturing Company : Case Study 1 (Safety). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afifah Maheran, Abdul Hamid (2006) Alat Kawalan Jauh Infra-Merah Pelbagai Peralatan Dan Litar Penerima. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afifah Maheran, Abdul Hamid and Syafeeza , Ahmad Radzi and Noor Mazlina , Mahmod and Yan Chiew , Wong (2011) Applying Speech Recognition System In Learning Basic Arabic Language. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afiqah, Sabari (2013) Space Vector Pulse Width Modulation For Industrial. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afiqah, Ngah Nasaruddin (2015) Energy Audit And Conservation Of Energy In Melaka: Case Study Of Library. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afisha, Yahya (2012) RFID Based Medical Database System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afizrul Iman, Mohamed (2013) Storage Water Tanks Cleaning Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ag Puteh, Awang Faruq Haqeemy (2017) Experimental Study On The Dependency Of The Lithium-Ion Battery And Temperature Using Chi-Square Independent Test. Project Report. UTeM, Melaka. (Submitted)

Ag Yusop, Ag Mohd Hafizul Hasrul (2016) Sensitivity Study Of Rear Suspension Properties Toward Vehicle Dynamic Characteristic Using ADAMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Agata, Ngawang (2006) Speed Control Of Induction Motor Using Scalar Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Agus, Mohd Nasip (2019) A Development of Vertical Axis Wind Turbine by using DC Motor As a Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Agus Salim, Muhammad Aizat Afiq (2019) Ergonomic Analysis In Improving The Process Of Assembling Woven Bags. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Agus Setyo, Budi and Safarudin Gazali, Herawan and Mohd. Nizam, Ayob and Asmala , Ahmad and KT, Lau (2006) Investigation Of The Structure And Properties Of Phosphate Based Glasses. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ah Chun, Alary Benedo (2018) Comparative Study Of Moisture Reduction Technique In Mineral Oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahamad, Muhammad Edzham (2023) Investigaton of neutral to earth voltage (NTEV) for distribution system in agensi nuklear Malaysia. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahamad, Muhammad Imanuddin (2017) Design And Develoment Of IoT Quadcopter Using Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahamed Fayeez , Tuani Ibrahim (2008) Development Of Bluetooth GPS Receiver. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad, Abdul Majid (2009) Design Lizard Trap. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Ismail (2009) Study On Predictive Maintenance Of HVAC System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Aeriyn Dwierni (2016) Pigeon Hole Notification System By Using Ethernet Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Aina Syuhada’ (2019) Characterization Of Feedstock Powder With Different Morphology For Plasma Sprayed Titania Coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Akmal Abdul Rahim (2017) Spare Parts Optimization (Valve) For Boiler At Coal Fired Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Azharudin (2017) Optimization Of RTCS Main Frame By Using Numerical Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Azriadih (2016) FE Modelling Of Tensile Behaviour Composite Material Using Altair Hyperworks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Kamarudin (2009) Vibration Analysis Of Turbine Generator Based On Onboard Data. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Madiha Husna (2017) Optimization Of Friction Stir Welding Parameter On Aluminium 5052 Alloy By Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohamad Alif Fayumi (2017) Design And Analysis Of Foldable Human Powered Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohd Aireen (2016) Evaluation On Difference Working Posture Using RULA Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Mohd Syahron Naim (2017) Development Of Tire Pressure Alarm System For Motorcycles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhamad Khaizaki (2015) Reaction mechanism of electroless quaternary nickel alloy deposition on fe substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Bakri (2020) The Enhancement Of Composite Phase Change Material Towards Thermo-Physical Properties Using Nanoparticle For Thermal Energy Storage. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Hafizul Hizam (2016) Dual Band And Dual Polarized Microstrip Patch Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Ismail (2015) Defect Detection On The Metal Surface By Using Machine Vision Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Muhaimin (2015) Design And Assemble Photovoltaic Panel Using Monocrytalline Cells. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Sahril (2016) Performance Evaluation Of Fluid In A Pipe Of Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Syukri (2022) Effect of laser power and speed on surface quality when engraving on aluminium. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhd Hairill Neimi (2016) Study On Dielectric Strength Improvement Of Reclaimed Used Transformer Oil Using Fuller Earth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhd Hairill Neimi (2016) Study On Dielectric Strength Improvement Of Reclaimed Used Transformer Oil Using Fuller Earth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Nor Fazlin (2018) Plant Headcount & Tracking System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Nur Ainina (2009) Statistical Analysis And Optimization Of A Low Noise Amplifier Operating At 5.8 Ghz ISM Band. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Nur Farah Farizah (2023) Improvement on current wheelbarrow (Wheelbarow-OnThe-Go). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad, Nur Fatin Afiqah (2018) The Development Of Capacitive Power Transfer For Biomedical Implantable Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Nurulnabilah (2017) Preparation and characterization of hematite iron oxide/CNT for photocatalyst. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Siti Fikriah (2019) The Study Of Flank Wear Using Coated Latuma (ALTiN) Boron Steel (22MNB5) On Aluminium (AA6061). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad , Ismail (2006) Pembangunan Model Kren Menggunakan PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad , Yaakob (2010) Evaluation Study On Static Analysis Of Automotive Brake System Using Numerical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aiman, Che Zakeria (2015) Handgrip Pressure And Hand Movement Analysis While Driving On Perodua's Car Steering Wheel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Airfan, Khalid (2009) Perbandingan Kesan Pengurangan Bunyi Oleh Penyenyap Bunyi Jenis Gabungan Dan Penyenyap Bunyi Jenis Tunggal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aizan, Zulkefle and Ahmad Idil, Abdul Rahman and Maslan, Zainon and Zaihasraf, Zakaria (2010) Analysis of Lightning and Switching Waveshapes Using TMS320VC5416 DSP Processor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aizat, Ahmad Ramly (2009) Ergonomics Evaluation And Design Of The Hand Tools Used In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Akmar, Ahmad Zahin (2017) Design of automatic workplace clamp for bridgeport vertical milling machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Al-Hakim, Shamsudin (2013) The Assessment Of Switchgear System Using Circuit Breaker Profiler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Anas, Yusof (2006) Energy Efficient Fluid Power Transmission Research. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Anas, Yusof and Zairulazha, Zainal and Mohd Khairi, Mohamed Nor and Nor Salim, Mohammad and Mohd Firdaus , Rameli and Khairul Nizam, Khalid (2008) Energy-Saving Compact Hydraulic Power Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Anwar , Hamdan (2008) Study Performance Of Cylindrical Grinding On Surface Roughness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Anwar , Mohamed Sabri (2013) Sistem Kawalan Brek Anti Kekunci (ABS). Project Report. UTeM, Melaka. (Submitted)

Ahmad Apandi, Azmirul Hyzain (2022) Conceptual design of smart passive exoskeleton for monitoring localized pressure and postural angle during sitting/standing tasks. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Ashraf, Rawee (2013) Performance Analysis Of Video Call Application On Tablet Using 3G Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Asri, Muhammad Hisham (2022) Development of IoT-based LPG gas leakage detection system using system-on-chip module. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Asyraf, Shari (2008) Non-Intrusive Liquid Level Detection System Using Ultrasound Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azan, Amirah Diyana (2017) Effect Of Layer Thickness And Fill Angle On Flexural Properties Of Carbon Fibre Reinforced ABS Printed Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azfar, Mahmami (2015) The Application Of Differetial Box-Counting Method For Iris Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azhar, Izzaim Danish Fathullah (2017) Electrostatic Chamber Development For Dust Collector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azhar , Omar (2008) Control Of Bus Suspension System Comparison Between Lead Lag Compensator And State Feedback Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azlan Shahibuddin , Abdul Manaf (2008) Feasibility Study On Design Of Grass Removing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azmir , Ahmad Tarmizi (2008) Kajian Tentang Mereka Bentuk Brek Letak Kereta Elektrik Untuk Kereta Penumpang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Basyir, Adri (2011) Home Security System VIA SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Bustaman , Arifin (2005) Net Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Danial, Zakaria (2015) Development Of Thin Flat Chassis Of Multipurpose Remote Controlled Powered Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Daud, Fatin Farhana (2023) Mechanical and physical properties of glass waste mixture in concrete. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Deli, Mohd Noor (2009) Menganalisa Keadaan Bukan Linear Analisis Unsur Terhingga Terhadap Rasuk Daripada Struktur Badan Bas Apabila Dikenakan Daya Lentur. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Dugel, Muhamad Sufian (2017) Implementation Of Safety Divider Downhill Road With The Transmutation Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Edham, Mohammad (2009) Optimal Dynamic Inversion Based Control Of An Overhead Crane. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fadhil, Dzulkafli (2011) Performance Evaluation Of Coordinate Measuring Machines. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fadlishah , Ahmad Foad (2009) Robocon Manual Robot Gripping Mechanism. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Fadzi, Ahmad Ridhwan (2017) Corrosion behaviour of mild steel coated with epoxy-graphene film in 3.5 wt.% NaCI solution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Fadzil , Zainudin (2009) Portable Wind Power System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fadzlan , Mustapha (2005) Switch Port Monitoring Tool. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Ahmad Fahrulrazie, Mohamad (2011) Performance Comparison Of Packet Transmission Over IPV6 Network On Different Operating System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz, Hamzah (2010) Analysis Of Lubricant Performance For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz, Kamarul Zaman (2009) Design Improvement Of Existing Executives Chair In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz , Mohd (2010) Analyzing DNS Query And Response. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Faiz Fikri, Ghazali (2009) Study Of Energy Absorption Of Motorcycle Safety Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal, Azmil (2008) Finite Element Modeling, Analysis And Simulation Of Wide Rim Alloy Wheels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal, Baharudin (2005) Wagon Elektrik : Pembangunan Yang Di Guna Di Dalam Pembuatan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal, Muhammad Hanafi (2019) System Integration For Mechanism And Test Bed Of Cone Laying System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Faizal , Ahmad Jamil (2008) Joining Performance Of Aluminium T6063 Using GTAW Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal , Yaacob (2008) Vehicle Active Steering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizol, Ismail (2009) Comparison Of Two And Three Plate Molds Plastic Injection Molding For Mold Design Selection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizol, Ismail (2005) Developement Of A Low Cost Hydraulic Oil Purifer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizul Bukhari, Mat Tahir (2009) Valve Flow Control Using PWM (PIC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fakhruddin , Yusoff (2007) Pembangunan Perisian Untuk Pengimbas Kod Bar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fakhrullah, Abdul Rashid (2015) The Effect Of Engine Oil On Vehicle Fuel Consumption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Falah , Zainol Azzudin (2007) Generate High Frequency Mechanical Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid, Sapar (2012) Development of Energy Audit Software For Lighting Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid, Mohamad (2010) Smart Casing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid, Zaini (2015) Effect Of Surface Roughness On Tribological Properties Of PKAC-E Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid , Mohammad (2008) Evaluation Of Environmental Factors On Production Site In Precision Industry Using Ergonomic Assessment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faris Firdaus, Mohd Zahidi (2012) Detection Of Winding Deformation In TNB Distribution In Service Transformer Using Cross Correlation Co-Efficient Analysis Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fariz, Faizal Lim (2008) The Study Of Optimum Condition To Produce Rubber Induced Polymer (Polyethylene). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fashli Afif, Abdul Hamid (2015) Electrical Discharge Machining Of AISI 304 Stainless Steel Using Mixture Of Deionized Water And Carbon Nanofiber With Surfactant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fathul Hakim, Rosli (2015) Green Cycling Helmet With Adjustable Light ''Be Safe Be Seen''. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fauzi, Ahmad Kamar (2007) Simulation Study Of Motor Controller via Voice Command. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fauzi, Nur Syamimi (2018) Development Of Single Phase Transformerless Inverter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Fazil, Muhammad Aimin (2018) Design And Development Of Hitting System For Head Concussion Test Rig. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fhadli , Salleh (2008) Effects of Tool Length In Milling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Mohammad Mohsin (2010) Design Of Automotive Chassis Electrical System Training Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Ibrahim (2012) Solar Power Backup For Heavy Duty Lighting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Mohd Azmi (2010) System Development Of An Initiation Sequence Using Face Recognition Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Zali (2009) Merekabentuk Prototaip Lampu Isyarat Pejalan Kaki Menggunakan PIC16F877A Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fisal, Muhammad Faiz (2016) Design And Optimization Of Automotive Suspension Test RIG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fitri, Ab Halim (2008) Analysis And Flexural Strength Of Mullite-Bonded Silicon Carbide Fabricated Using Various Uniaxial Mechanical Pressure And Milling Duration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fitri, Sukarman (2010) Implementation Of Design For Manufacturing And Assembly (DFMA) Methodology To Analyze Antitheft Device System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fitri , Md Zain (2008) Summon Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fuzi, Hawa (2019) Investigation On Mechanical Properties Of Reclaimed Nonwoven Carbon Fiber Composite For Secondary Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Ghazali , Zulcefli Muhammad (2009) The Investigation Of Effect Of The Capillaryty On The Penetrant Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hafizi, Mohamad (2011) Automatic Railway Gate Control By Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hafizuddin, Zakaria (2009) Design And Development Of Smart Poultry House And Eggs Cleaning Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hakimie, Othman (2012) Sport Training System With Android Based Applications Using Wireless Connectivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hamidon , Ali (2008) UTeM LAN Voice Chat. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Hanafiah, Syahirah Hanani (2017) Active Control Of Quarter-Car Suspension System Using Linear Quadratic Regulator. Project Report. UTeM, Melaka. (Submitted)

Ahmad Harris, Abd Hamid (2013) Design Of A Low Cost Portable Heart Beats Monitor Using Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hatta, Abdullah (2008) Design And Development Of Fuzzy Logic Based Level Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hazwan, Fauzi (2009) Parking Brake Tester. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hesamuddin, Ahmad Farouq (2023) Bathymetric study at Malacca river (Taman Rumpun Bahagia) using compressed high-intensity radiated pulse device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Hiedzuanuddin , Ahmad Khidir (2012) Design Low Noise Amplifier With Ultrawideband Frequency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hisyamuddin , Hassan (2013) Novel EDM Screw Threading Technique Using Threaded Cavity Electrode. Project Report. UTeM, Melaka. (Submitted)

Ahmad Humaizi , Abd Jamil (2006) Rekabentuk Dan Fabrikasi Kereta Elektrik Fuel Cell Serba Ringkas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Idil, Abdul Rahman and Ahmad Aizan, Zulkefle and Ahmad Fairuz, Muhammad Amin and Maslan , Zainon and Mohd Ridzuan, Rozali (2010) Automatic Speaker Identification System for Robot Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Iqbal, Ahmad Syafiq (2018) The Study Of Thermoplastic Corn-Starch Composite Reinforced By Short Alkaline Treated Pineapple Leaf Fibre On Mechanical,Physical And Environmental Propertie. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Ismail, Man (2008) DC Motor Speed And Position Control Using Analog PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Jamal, Salim and Abdul Hamid, Hamidon and Muhammad Shahril, Johal (2004) Intelligent Microcontroller Traffic Light System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Jamal, Saidatul Nur Aisyahtun Sakinah (2018) Kinematics Analysis Of Fish Robot Movements. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Jamal, Salim and Soo, Yew Guan and Radi Husin, Ramlee (2013) Physiological Using FGPA In Health Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Kamal , Mohammad (2006) Design And Implementation Of Carbon Monoxide (CO) And Nitrogen Dioxide (N02) Detector By Using Peripheral Integrated Controller (PIC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Kamely, Mohamad and Johny Purnomo, Joewono (2013) Performance Analysis Of Mechanical Properties And Weldment Area Of Aluminium Alloys. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad KasyafHamdi, Ahmad AFandi (2009) Web Design For Energy Auditing Practice. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Khairi, Muhammad Irsyad (2019) Ergonomics Evaluation Of Design Studio At FKM UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Khairi, Muhammad Syahmi (2017) The Development Of Semiautomatic Vertical Ladder For Domestic Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Khairul Fazli, Nadzri (2009) RF Control Of A Multi-Tasking Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Khairul Radhi, Kamaruzaman (2008) PID And State-Feedback Controller Design By Using Matlab. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Latifi, Yaacob (2007) Investigation Of Machining Defects On Rolled Steel Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Lotffi, Zakaria (2015) Digital Stopwatch Water Crops With GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Lutfi , Dahari (2013) Menilai prestasi enjin diesel menggunakan campuran minyak sayuran dengan diesel sebagai bahan api. Project Report. UTeM, Melaka. (Submitted)

Ahmad Mawardi, Adilla Fasha (2017) Effect of applied load and the sliding speed on the subsurface deformation of wear on hybrid metal matrix composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Mokhtar, Muhammad Shauqi (2016) Wear And Friction Profiling Of Zinc Ion Induced Corn Oil Based Bio-Lubricant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Murad, Farah Aini (2016) 6.0 Ghz Antenna For Wireless Communications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Mursyid, Ramli (2015) Speed Control Of DC Motor Using MOSFET. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Musli , Osman (2009) Comparative Study Of End-Mill Performance Between Straight And Spiral Flute. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Muslim , Othman (2008) Failure Analysis On TIG Weldment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Mustafa, Ali (2013) A Study Of The Influence Of Cutting Parameter On Surface Roughness And Surface Morphology In High Speed Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Muzahar , Mohd Zainal (2005) Menghasilkan Daya Tujahan Dengan Menggunakan Motor Dan Propeler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nafis, Naif Fahmi (2018) Development Of Portable Solar Powered For Rural Application. Project Report. UTeM, Melaka. (Submitted)

Ahmad Nahran, Luqman El Hakim (2017) Experimental Investigation On Energy Absorption Capacity Of Mild Steel Cone Subjected To Axial Crushing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Naim, Ismail (2010) Identification And Reduction of Noise And Vibration level On Rear Handle Of Handheld Tools Using Fast Fourier Transform (FFT) Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nasafi, Mohamad (2006) ECG Signal Analysis By Joint-Time Frequency Distribution. Project Report. UTeM, Melaka. (Submitted)

Ahmad Nasri, Mior Hezeri Akmal (2016) Development Of A Wall Climbing Robot For Cleaning Crude Oil Storage Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nawir, Nur Amalina (2017) Development Of The Home Appliances Controller Based On DTMF Signal. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Nazri, Ahmad Danial (2016) Home Appliances Monitoring And Control Using Smartphone Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nidzamuddin , Najib (2008) Development Of Safety System For XY-Table. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nizam, Mohd Jahari@Mohd Johari (2005) Robot Mobil Pengesan Cahaya (Photoresistive Light Tracking Mobile Robot). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nizam, Afiq Syazwi (2016) Optimization of process condition on loading degree of magnetic composite sheet by lumen loading technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Noh , Salleh (2010) Design Analysis And Simulation Of A Railing System Security Cage At Taman Buaya. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nor Hisham, Nurul Asyikin (2016) Synthesis of TiO2 nanostructure by anodic oxidation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Nor Syahid, Hassan (2013) Self Organizing Map Technique For Transformers Condition Monitoring From SFRA Result. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nordin, Mohd Firdaus (2017) Design Of Integrated 3D Printer Recycle Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nordin , Mohd Shaifudin (2012) Performance Analysis Of Point To Point Communication For Land Public Transport Via Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nur Qamari, Mohd Azhari (2009) Improvement Of Mechanical Properties Of Aluminum Alloy By Artificial Aging Treatment For Structural Application In Automobile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rashdi, Mohammad Amirul Yaziid (2018) Development Of Automatic Gas Leakage Detector System Using Arduino and Global System Mobile Module For Domestic Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rashidi , Ahmad Fauzy (2007) Infrared Robotic Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rasydan , Hasan (2009) An Experiment Study Of The Effect Of RPM On Turning Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Razani, Noor Syazwani (2018) Microstrip Antenna With Rectangular Patch Sensor For Soil Characterization. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Razif, Rabudin (2009) Research Study On The Noise Level At The NGV Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Razli, Mohd Faez (2016) Gas Leakage Monitoring Over The Net With Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rezduan, Zainal (2009) Development Of New Third Light Brake Signal On Motorcycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridhan, Ramli (2012) Simulation Developement Of Step Down DC Converter Based On Multicell Topology Using PSIM 9. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridhwan, Abdul Rahman (2009) Apparatus Embodiment Of Solar Power Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridhwan , Abdullah (2008) Design And Development Of Antilock Braking System For Motorcycle 110 Cc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridzuan , Ab. Wahab (2008) Microwave Filter-Stepped Impedance Lowpass Filter At 2.4GHz. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Rijal , Abdul Rahman (2010) Maintenance Monitoring System Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rozi, Shahrain (2015) Surface integrity of AISI D2 when machined with plasma assisted machining. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Sabri, Mohamed (2010) Pemindahan Haba Di Dalam Rumah Dengan Menggunakan Rockwool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sabri, Muhammad Irshad (2017) Smart Monitoring Water Quality Detector. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Sadhiqin, Mohd Isira and Adi, Mohd Khafe and Zamre, Abdul Ghani (2010) Active Steering System Based on Nonlinear Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sadhiqin, Mohd Isira and Adie, Mohd Khafe and Mazran, Esro and Zamre, Abdul Ghani (2010) Wireless Voice Controlled Wheelchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Saifulnizam , Amron (2010) Heat Treatment And Mechanical Property Of Ti6A14V. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Saifulzaman, Raidah Rauhah (2018) Heat Recovery Process In Design And Development Of Integrating Hot Water Dispenser With Portable Air Conditioner By Using Peltier Effects. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Salsabil Zaky, Irfan Zaky (2009) Speed And Position Trainer For Analog P, PI, PD, And PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sarbaini , Syahirah (2016) Implementation Of Various Bio-Material As Double Negative Metamaterial Build In For Ultra-Wideband (UWB) Antenna Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Shaarizan, Shaarani and Maslita, Abd Aziz (2011) 3D Expressive Animated Body Movements For Virtual Humans In Malaysia Culture. Project Report. UTeM. (Submitted)

Ahmad Shafie, Razak (2015) Comparative Study On Differene Approach Of Boothroyd Dewhurst (B-D) Design For Assembly Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Shahril, Razali (2011) Effect Of Size Of Bolt On The Relative Critical Slippage Of Bolt-Nut Joint Under Transverse Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Shaiful Redha, Razak (2011) Design And Development Of Substrate Integrated Waveguide (SIW) Bandpass Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sharul Adli, Mohammad (2005) Multipurpose Ladder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sibi, Mohd Yazid (2016) Incorporating Flywheel Hybrid Module In Motorcycle : Prototyping And Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sobri, Dahalan (2011) Pemasangan Kincir Angin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sobri, Ishak (2009) Development Of Aerodynamic Smoke Tunnel Unit For Teaching And Learning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sufi, Abdullah (2008) Brikueting Panas Habuk Kayu. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sufian, Md. Ali (2006) Menganalisis Dan Membangunkan Penggalak Isyarat FM (Analyze And Build A FM Signal Booster). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Suzaimy, Sukor (2010) Renewable Energy (Wind Power) Mini Prototype Plant With Scada System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Suzairy, Sukor (2008) Velocity Measurement Of Flowing Particle Using Combination Of Laser And Optical Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Syafiq, Baharin (2009) Experimental Modal Analysis On Flexible Plate Structure Using Forced Vibration Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syafiq , Juwaini (2010) Analyze Bonet Activity By Identify The Difference Between Normal And Abnormal DNS Traffic. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Syafuan , Sulaiman (2009) Transmission Of Audio And Video Signal Using Square Wave Frequency Modulation. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Syahid , Mohamad (2009) A Study On The Application Of Value Stream Mapping In Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syahir, Sulaiman (2012) Analisis Daya Seret (Drag Force) Terhadap Rak Bumbung Kereta Kompak Dengan Menggunakan Kaedah Simulasi Dinamik CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syahir , Zulkiffli (2010) Effect Of Coil Size To Performance Of Linear Moving Coil DC Motor On Positioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syahmi, Basri (2014) Design Parameter Investigation Of Single Mode Silicon-On-Insulator (SOI) Parallel Cascaded Moicroring Channel Dropping Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syauqi, Hanas (2013) Peranti Pemadam Kebakaran Automatik Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syauqi, Hanas (2013) Peranti Pemadam Kebakaran Automatik Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syauqi, Ahmad Shukri (2012) Natural Convective Heat Transfer In Square Enclosures Heated From Below. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syazili, Md Din (2015) Investigation On The Effect Of Machining Strategies On The Surface Finish And Dimensional Accuracy Of Five-Axis Flank Machining Of Curvy Angled Shapes (CONVEX). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syaznan, Mohd Asri (2011) The Design Of A Guessword Game Via PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syazni, Ahmad Akmar (2012) Effect Of Heat Treatment On Impact Strength Of Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syazwan, Che Muhamad (2009) Pitch Controller For Aeroplane Using PID Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syirwan Adli, Hamzah (2007) Analysis Of The Influence Of Electrical Discharge Machine Die Sinking Parameters On material Removal Rate Of Mild Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tajuddin, Hamzah (2006) Knowledge Based System For Material Selection In Bumper Beam Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tajuddin, Arifah Nabilah (2016) Design Of Microwave Resonator Sensor For Material Characterization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tajudin, Ahmad Farhan (2017) Fluidized bed granulation process : effect of chamber and binder temperature on granule physical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Tamin, Haryanti (2018) Development Of Solar Powered River Trash Cans Monitoring Using Global System For Mobile(GSM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Ahmad Taqiuddin, Ahmad Sarimin (2015) Analysis And Simulation Of Service Continuity Enhancement By Using Automatic Protection System (APS) In Fiber Optic Communication Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tarmizi, Md Nor (2010) Coordination Protection System In Industrial Plants. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tarmizi, Ajwad Nadhirah (2009) Vision System For Autonomous Underwater Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Termizi, Nadiah (2015) Design a dustpan and analyze the optimum injection molding parameters for a gate location. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Witry Quayum, Mohd Nor (2015) Exploring And Designing Actuator For Neonatal Baby's Chest Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusairi, Bani Hashim and Abdul Rahim, Samsudin and Mohd Syafik, Jumali and Cheong, Teik Keon (2008) Development Of Zlatanov-Gosselin Robotic System. Project Report. UTeM, Melaka Malaysia. (Submitted)

Ahmad Yusairi, Bani Hashim (2013) Development Of Open System And Application Mobile Platform For All Terrain Locomation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusoff, Ahmad Ramadhan (2017) Application Of Knowledge Based Engineering In Designing Automobile Rim And Macros In CATIA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusri, Che Mat (2009) Automatic Control For Leaching Process. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Yusri, Yaacob (2006) Implementation Of Image Enhancement Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Za'im, Zulkefli (2010) Design And Fabrication Of Heat Exchanger - Radiato. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zahidi, Muhammad Zulfadli (2017) Experimental Study On The Effect Of Air-Fuel Ratio On Performance Of Spark Ignition Engine Fueled With H2O2 Gasoline Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zahirudin , Mohamad Ramdzan (2008) Proses Pengoptimuman Parameter FDM Bagi Material ABS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaidi, Ideris (2011) Mechanical Properties Of W/Cu-Zn Metal Composite Via Mechanical Alloying. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaifazlin , Zainordin (2009) Magnetorheological Brake System Characterization Using Non Parametric Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaini, Abdul Hafiz (2023) Development of optical microfiber sensor for humidity detection. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Zainuddin, Ahmad Syahmi (2018) Fabrication And Characterization Of Carbonized Electrospun Nanofibres From Polyacrylonitrile And Polyvinyl Alcohol Precursors. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Zakhirie , Mohamad (2007) A Study Of Design And Development Of 'Songket' Weaving Automatic Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaki , Abd Razak (2008) Preliminary Investigation Of Automobile Hydraulic Transmission System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaki , Shukor and Fariz, Ali @ Ibrahim (2006) Design And Implementation Of A Search And Retrieval Mobile Robot For Application Oriented And Practical Based Educational Purposes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zakuan, Ahmad Dahalan (2012) Analysis Of Lightning-Caused Ferroresonance In Capacitor Voltage Transformer (CVT) Using Harmonic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zharif, Azizan (2008) Control Of Wheeled Mobile Robots. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zharif Rabbani, Rozali (2008) Flow Investigation Around Sphere In Open Circuit Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zul Fadzli, Mansor Taridi (2009) Simulation For Helicopter Control System Using LQR Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zulfadli , Ahmad Nazari (2008) Voice Interactive Game Using Speech Recognition. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Zulhelmi, Ab Hamid (2010) Cooperative Space-Time Block Coding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zulkafli, Muhammad Hazim (2023) Development of phase change material (PCM) wallboard for building passive cooling applications. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Zuraimi, Zulkifli (2005) Mekanisma Robot Selari - Pembangunan Bagi Pengasingan Produk Dalam Proses Pembuatan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmat, Amin (2019) Portable 3-In-1 Emergency Kits. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmed Fauzi, Mohamed Fiqri (2018) Comparison Of Laminar And Turbulent Model Of Water Flow In Microchannel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmed Ismail, Amar Awad Mohamed (2017) Development Of Obstacle Avoidance Algorithm For Robotic Wheelchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmed Salem, Mohammed (2017) The Investigation Of Trajectory Generation Of A Curved Wall Brick Laying Using 5 Dof Mobile Robot. Project Report. UTeM, Melaka. (Submitted)

Ahmed Yahya, Tawfik (2015) Force Characterization Of An Electromagnetic Linear Actuator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aida Adlina , Mohamad Raffi (2006) Machining Performance Of Titanium Carbide (TiC) As Tool Coating. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Aida Bahiyah, Mohd Rodzi (2009) Labor Utilization And Man To Machine Ratio At A Semiconductor Facility. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aidalina, Mahmud (2006) Automatic Reclosing System : Smart Protective Circuit Breaker. Project Report. UTeM, Melaka. (Submitted)

Aidil Azhiim , Shamsuddin (2010) Short Term Load Forecasting With Fuzzy Logic Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aidil Azlan, Ahmad Zamri (2008) Laminar Natural Convection In Enclosure Containing Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aidil Fariha, Othman (2008) Vibration Analysis For Diagnostic Of local Faults In Rolling Element Bearing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aiman Arrif, Ahamad Tarmizi (2012) Design And Fabricate A Brake System And Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aiman Hilmi, Azhar (2010) Design Of Low Noise Amplifier For WiMAX Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aimi Faridah , Tajuddin (2010) Power Flow Allocation In Deregulated Power System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aimie Nazmin , Azmi (2006) The Design Of High Voltage Generator Using Ignition Coil Up To 50 Kilovolt (kV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ain Fathihah, Mohamed Yusoff (2015) The Effect Of Fibre Size, Fibre/Matrix Interphase Adhesion And Fibre Loading On Mechanical Properties Of Bio Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ain Natasha, Marafi (2013) Design Of A Reactive Power Compensation For Transmission Line Voltage Sags Due To Faults. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aina Fairuz, Mohd Ariffin (2013) Paddy Field Irrigation Control System By Using Programmable Logic Control (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aini , Ahmad (2009) Seedling Diameter Measurement With Application Of Infrared. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Aini Fathillah , Hassan (2008) Learning Management System For Mobile Device (LMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ainul Izzati , Zakaria (2009) PC Based DC Motor Speed Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ainun Naziroh, Ahmad Sukri (2015) Analogue Electronic Trainer (BJT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Airin, Jalani (2006) Space Station Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aisha , Abd Ghani (2010) Design And Development A Line Following Mobile Robot For Multipurpose Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishah , Mazelan (2010) Effect Of Re-solution Heat Treatment Temperature On The Impact Toughness Of An Aluminum Alloy For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishah Illani, Sulaiman (2013) Wearable Microstrip Patch Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishatul Rodhiah, Mohamad (2009) The Study Of Rings Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aisyah, Mohamad Jusoh (2015) Emission Inventory For Area Sources: Case Study For Workshop. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aisyah Almajidaf Tan, Sofian Tan (2007) Effectiveness Of Oil Consumption At Motoring Test Case Study: Automotive Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizat, Mohamed Ali (2008) Measurement And Evaluation Of The Reverberation Time For Classrooms In UTEM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizat Fuad, Ahmad Shatar (2009) Studies And Design Of Suspension System For A Formula SAE Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizilia , Mat Affim (2007) Development Of A 3G Bandpass Filter Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizuddin, Arbi (2009) Design A Charge Controller For Wind Generator. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Aizuddin , Pata Ariffin (2007) Design And Development Of CIM System - Lifter Platform. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Aizuddin Fahmi, Mohd Riduan (2015) Modelling And Simulation Of Cylinder Deactivation System Applied To Passenger Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ajid, Abdul Aziz (2019) Design Improvement Of The Heating Oven For Honeycomb Core Forming Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ajmal , Muhamad Sazali (2007) Propeller Led Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akhmal Khalis , Mohamad Isa (2007) Mobile Game-Grab More Money. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akin, Gwynnie Chembat (2009) Real-Time Fuzzy Logic Position Controlled DC Motor Drives. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmal, Azmi (2008) Mereka Bentuk Sistem Nozel Automatik Untuk Mesin Pemadam Api Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmal, Suriati (2017) Ontology-Based Approach To Elicit Precise Information For Accurate Automotive Product Development. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Akmal Aziz, Mohammad Syafiq (2023) Development of an automatic casement using microcontroller. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Akmal Hakim , Musah (2008) DC Motor Speed Controller Using PIC16F876A. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmarina Izza, Mokeri (2013) Smart Parking Via RFID Tag. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akwanizam, Azmi (2009) Analysis And Measurement Fiber Optic Fault By Using Optical Time Domain Reflectrometer (OTDR). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al Amin, Mohamed Sultan (2009) Development Of General Value Stream Mapping For Productivity Improvement And Kaizen Implementation At An Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al Amin, Mohamed Sultan and Mohd Warikh, Abd Rashid and Sivarao, Subramonian (2012) Design and Development of Circular Work Clamping System for Non-Contact Machining Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al Khan , Abdul Gani (2008) 3D Animation Story "Cintailah Sungai Kita". Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al-Awazangi , Sha'arani (2009) RFID Smart Key Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al-Bakri, Abdulrahman Mohsen Saleh (2017) Design of control and integration strategy for multiple handling system using programmable logic controller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Al-Hattami, Shaher Abdulwahid Hamed (2021) Developing a manual hand pedaling elevator for a wheelchair user. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Al-Khawlani, Hafedh Abdullah Mofreh Dhafer (2016) Design Of Antenna With Notch Filter To Support Multifunction Operation Standards In Wireless Communication Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

AlGumaei, Mohammed Yahya Qaid (2016) Design And Development Of Dual-Band RF Switch At 2.3 Ghz And 3.5 Ghz For Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alagendran, Andiappan (2013) Developing Lean - EMS Integration Database For Sustaining ISO 14000 Certification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alagendran, Andiappan (2013) Developing Lean - EMS Integration Database For Sustaining ISO 14000 Certification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alamin, Mohammad Al Akeef (2017) Implementation Of Energy Monitoring For Solar System. Project Report. UTeM, Melaka. (Submitted)

Aldarji, Adeb Ahmed Saeed (2017) A Study On The Effect Of Varying Fiber Contents To The Physical And Moisture Absorption Characteristics Of Hybrid Oil Palm Empty Fruit Bunch/Kenaf Reinforced High Density Polyethylene Composites For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alex, Madi Chung (2019) Wideband Nonlinear Dynamic Vibration Absorber Using Combined Softening And Hardening Stiffness Mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alfian, Haris (2008) Alat Penjimat Kuasa Elektrik (Power Saver). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Afif Danial (2019) Design & Development Of Voice Command Vehicle Turn Signal System For Urban Car Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ali, Alexander (2017) Investigation Of Contamination In Ball Bearing Operated Under Hexagonal Boron Nitride (hBN) Nanoparticle Additives Mixed With Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Khalis Alwi (2018) Effect Of Different Concentration Of Carbon Nanotube (CNT) In SAC305 Solder Alloy On The Hardness, Wettabilitty And Resistivity Under Thermal Aging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Mohd Khairulfadzlee (2023) Evaluating electric boat with inboard engine for houseboat vessel. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ali, Nazarudin (2016) Flexible Metasurface-Enabled Antenna For Wearable Medical Body-Area Network Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Nur Azarena (2014) Analysis for cast aluminium alloy titanium carbide. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ali, Nurul Fatihah (2016) Emergency Voice Detect Tracking System Using Mobile Phone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Adzha , Ishak (2007) Pengiraan Dan Analisis Bagi Gear Transmisi Menggunakan Pengaturcaraan Komputer Papan Pemuka Bergrafik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Arashid, Ahmad Syahmi (2018) Study Of System Integration Of Portable Ablution Using Solidworks. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ali Ilman, Abdullah (2012) Study Of Optimizing HX1 Car Air Conditioning Heat Exchanger By Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Mohamed, Ahmed Abbas (2017) A Modified PID Controller For DC-DC Boost Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Mohammad, Sulaiman (2017) Control And Navigation Of Aerial Drone In Harsh Environment Using APM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ali Nordin , Ismail (2009) Optimization Of Wind Sourse For Maximum Electric Power Generation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Othman, Syafiq (2015) To Map 3 DOF Waist Power Assistive Robot Motion Using Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Saeedan, Ahmed Saeed (2015) A study of pre-travel variation of coordinate measuring machine with different stylus configurations. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ali Saif Gamil, Musaab (2018) A Critical Analysis Of PID Tuning Methods For Automatic Voltage Regulator System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alia Ruzanna, Aziz (2009) Mereka Bentuk Dapur Suria Yang Praktikal Digunakan Untuk Memasak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aliaa Syahirah, Abd Rashid (2013) Analysis Of Android Malware (Droidkungfu 2) Through Their Behavior Using Static Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Mohd Aswarizal (2008) Kon Keselamatan Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Aizad (2015) Study on the prediction of cutting tool lifespan towards casting processed product. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Alias, Amirah Maisarah (2022) Mechanical properties and surface quality of natural rubber-poly (Lactic Acid) composites for fused deposition modelling technology. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Alias, Farah Nurhidayah (2017) Design For Improvement Of Metrology And Inspection Of Integrated Circuit For Accuracy Check Using Smartscope Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Mohamed Fikhrie (2019) Dimensional Analysis Of 17 Dof Railway Vehicle Suspension Model. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Nor Hasrin Nadia (2017) A Statistical Model For Determining Friction And Wear Of SK11 Ball Bearing In Nanoparticles-Enhanced Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Nor Madihah (2018) Dual Band Long-Term Evolution (LTE) Directional Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Nur Shahirah (2019) Tribological Properties Of 3D Printed Acrylonitrile Butadiene Styrene (ABS) Under Dry And Wet Conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias , Khamis and Azhar, Ahmad and Azhan, Ab. Rahman (2010) Compressed Air Energy Storage for Power Generation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alibediri, Nurazreen (2015) Formation of self-organized ZrO2 nanotubes by electrochemical process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alif Zulfakar , Pokaad (2008) Kecekapan Haba Ekzos Dan Penggunaan Bahan Api Tentu Brek (BSFC) Enjin Diesel Dengan Bahan Api Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aliman, Selamat (2011) Evaluating Kismet And Wifi Manager As Wireless IDS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alis, Izzati Fatin (2018) Experimental Study On Mechanical Behavior In 3D Printed Part Using Fused Deposition Modelling (FDM) Method : The Oil Palm Fiber Reinforced Thermoplastic Filament As Raw Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alita, Dewi and Aida Fazliana , Abdul Kadir (2005) Computer Aided Education In Electrical Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alkahari, Mohd Rizal and Ramli, Faiz Redza and Maidin, Shajahan and Sudin, Mohd Nizam and Rosli, Nor Ana (2019) Consolidation Characteristics Of Parts Fabricated Via Open 3D Metal Printing Utilizing A New Integrated Plasma Deposition Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Allah Ditha Khan, Abdul Rim (2006) Action Game For Mobile Phones : Silat Lagenda. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alwi, Muhammad Haziq Zafrin (2022) Assessment of surface morphology of laser engraved stainless steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alwi, Zulkefli (2009) Simulation And Control Of Water Tank System Using LabVIEW And Automation Studio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alwiy, Muhamad Fauzie (2017) Design of personalised insole for production line industrial workers via level of pain and pressure distribution data. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alyaa Izzati, Hashim (2010) Study And Preliminary Design Of High Speed Impact Test Machine Using Hopkinson Bar Test Principle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amaluddin, Zainuddin (2015) Wireless Power Transfer For Electric Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aman, Aminudin (2018) Investigate The DC To AC Voltage Ratio For Inclined Plane Tracking And Erosion Test Of Polymeric Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aman, Mohd Asyraf (2018) Investigation On The Characteristic Of Thermoplastic Cornstarch (TPCS) Composites Reinforced Short Pineapple Leaf Fiber (PALF) By Using Different Method Of Preparation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aman, Mohd Azizi (2017) Design And Optimize The Interior Design And Furniture Mechanism Of Modular Unit Of Food Truck. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amar Ridzuan, Abd Hamid (2011) Design And Fabrication Of Glass - Fiber Composite Bodywork For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amat, Mohamad Syahmezan (2023) Portable wireless traffic light. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Amat Ali, Nur Abidah (2017) Optimization Of Channel Assignment In Mobile Communication Using Tabu Search. Technical Report. UTeM, Melaka. (Submitted)

Amat Amir, Basari and Mohd Shakir , Md Saat and Khisbullah , Hudha and Zulkarnain, Zainuddin and Adie, Mohd Khafe (2008) Control Of Quarter Car Nonlinear Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amat Rowaji, Nur Amalinna (2018) A Study Of Automatizing Vision Base (Camera) Object Dimension Measurement By Using MATLAB. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amat Sahari, Muhammad Haziq (2017) Effect Of Rolling And Heat Treatment On Mild Steel Plate. Project Report. UTeM, Melaka. (Submitted)

Ambalazan, Vijayah Santhi (2018) Development Of Flood Monitoring System Using Blynk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ambo, Nur Farhani (2016) Enhancing The Breakdown Voltage Of Natural Ester Insulating Oil By Optimizing Mixed Antioxidants For Power Transformer Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ambo, Nur Farhani (2016) Enhancing The Breakdown Voltage Of Natural Ester Insulating Oil By Optimizing Mixed Antioxidants For Power Transformer Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ameen , Mahadi (2008) Developmet Of Human Interface (HMI) For Flexible Manufacturing System (FMS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ameenah, Am Abdul Aziz (2009) Kajian Dan Penghasilan Penapis Seramik Bagi Proses Tuangan Aloi Aluminium. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amer, Mohammad Saifullah (2016) Development Of Electronic Notice Board Using Wireless Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amer Adli, Mohd Dzainudin (2010) Study Of The Effect Of Temperature And Relative Humidity On The Measurement Variance Conducted In The Metrology Lab, FKP. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ameran, Noorleysa Farahani (2016) 1.5V To 24V Adjustable DC Power Supply Design Based On Bang-Bang Control Of Buck Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ameyrullah, Arshad (2007) Merekabentuk Dan UjIkaji Penunjuk Paras Kandungan LPG Di Dalam Selinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ami, Amir Ashraf (2017) Development Of Equipment For Loosen And Tighten Of Lug NUTS By Using Gear Concepts (Special Lug Wrench Tool). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amilludin, Mashila (2023) Development of rainwater sourced pico - Hydro generator powered water filter. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Aminatul Munauwarah, Yahaya (2012) Wireless Alert System For Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminuddin, Abdul Wahab (2008) Development Of Controller For Back Cover Assembly Station For Flexible Manufacturing System Using Programmable Logic Controller (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminuddin, Mohd Saiful Aiman (2023) Signal detection for gear defect of pump system using signal analysis of data acquisition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aminuddin, Nurul Nadia (2017) Design And Modelling A Three-Phase Grid-Connected Photovoltaic At Low Voltage Network And Its Performance Using PSCAD Software. Technical Report. UTeM, Melaka. (Submitted)

Aminur Hazieq, Zulkefli (2016) Study Of Adsorbent Effectiveness On Reclaimed Transformer Oil. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Aminurashid, Meor Azizul Fitri (2016) The Theoretical Of Dimensional Measurement By Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminurrashid, Noordin and Mohd Azli, Salim and Mohd Hanif, Che Hasan and Mohd Razali, Mohamad Sapiee and Sulaiman, Sabikan and Zamani, Md Sani (2011) Development Of 4-Legged Walking Robot And Movement Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir, Azuwaizie (2010) Implementation of RFID Technology At The Zoo Entrance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir, Halil (2009) Preliminary Design Analysis Of Hydraulic Transmission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir, Mohd Anas (2018) Vibration Analysis For Misalignment On Spur And Helical Gear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir , Fahruroji (2006) A Study Of Square Ring Under Lateral Compression Using Experimental And Finite Element Methods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Aizuddin , Yusoff (2006) A Study Of Surface Integrity Whilst Turning Aisi 1045 Steel With Tic Al203 Coated Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Farhan, Maarof (2011) Development Of Car Door Lock Actuator Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Fauzan, Jaafar (2006) Intranet Chat Monitoring Tool Server. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Fizal, Amir Razauddin (2015) Analysis On Effect Of Coconut Fibre Towards Impact Characteristics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hamzah, Muhamad Nasruddin (2018) Fabrication Of Uniaxially Aligned Electrospun Nanofibre Using A Rotating Collector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hamzah, Nur Aqila Syamimi (2020) Tribological Performance Of Grease With Different Types Of Additives. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amir Hanin , Yazid (2007) Productivity Improvement Using One Piece Flow Techniques : A Study At An Electronic Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hasan, Iskandar (2014) Development Of GSM Based For Car Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hussein, Mohd Hanafiah (2017) Industry Monitoring Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Mohamed, Kamarul and Muhamad, Mohd Razali and Yaakob, Mohd Yuhazri and Abdul Mutalip, Zaiton and Anand, T. Joseph Sahaya and Bidin, Basri and Jantan, Zulkifli and Musa, Mohd Sukri (2018) Automatic Bahulu Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amir Shah, Nurhanani (2019) Comparison Between Double-PID+LQR And LQR Controllers For Rotary Inverted Pendulum. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amir Suffian, Norshahri (2008) Radio Frequency Controlled Stairs Climbing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Zaid, Baharudin (2009) Penyerapan Tenaga Oleh Keluli Lembut Di Bawah Hentaman Kuasi-Statik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amira, Sahari (2012) Time Study Method Implementation At Jecmetal Industries Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amira Emyliana, Zailan (2017) Analyze of process parameter in 19 nm WSi2/TiO2 N-channel MOSFET using statistical modelling. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amira Sarayati , Ahmad Dahalan (2009) Voice Activated Crib Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amira Sariyati, Haji Ayob (2005) OSC Assist System (OAS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirah , Jaafar Mad Ariff (2009) Velocity Measurement Of Moving Particle Using Combination Of Laser And Phototransistor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amirrul Adha, Sulaiman (2015) Interactive Multimedia System By Using Hand-Gesture Motion Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirthalingam, Subramaniam (2006) Everything That Moves Alarm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiruddin, Husin (2008) A Study On Effectiveness Netwook Monitoring System Software In Local Area Network Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiruddin, Omar (2012) A Study Of Maintenance Design System For Industrial Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiruddin, Amirul Afiq (2018) Study On Solar Heat Collector For Absorption Refrigeration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiruddin , Shahipurullah (2013) Investigation Of Extracting Oil From Waste Palm Fruit Fibre. Project Report. UTeM, Melaka. (Submitted)

Amirul , Sait (2008) Potential Application Of Ferrofluid For Robot Gripping Mechanism. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amirul Aizat , Mohd Razali (2012) Hybrid Learning Control Schemes With Input Shaping Of A Flexible Manipulator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Akmal, Abd Rahman (2012) Investigation On The Effect Of Transient Overvoltage On Electrical Cable. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Asyraf, Mat Nasir (2013) Preparation And Characterization Of Green Rubber Foam From Reclaimed Rubber Glove. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Farhan, Mohd Salih (2010) Design A Bending Machine For Bowl Feeder Attachment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Farhan , Mohd Salih (2010) Design A Bending Machine For Bowl Feeder Attachment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Fariq, Ramly (2009) Design Of Automatic Gate Powered By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Nizuan, Mohd Kasbollah (2005) Membina Satu Model Kecil Turbin Dedenyut Bagi Tujuan Pembelajaran Dan Kajian. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Ramzani, Radzid (2015) Removing Al-Quran Illumination. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Rezza, Ishak (2015) Development Of Multiple Wireless Power Transfer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Shafiq, Hsan Baseri (2010) Solar-Powered Electric Bicycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirullah , Amran (2013) Bahan api pepejal daripada sisa bahan buangan industri minyak kelapa sawit. Project Report. UTeM, Melaka. (Submitted)

Amirulnozam, Hamidon (2005) To Develop The Production Process Flow Layout For Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amit, Auzai (2017) Design Of Electronic Fuel Injector Tester For Educational Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiza, Abu (2010) Monitor And Control Greenhouse Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amjad Saddar , Md. Isa (2013) Pembangunan Sistem Kuasa Penggerak Hibrid Elektrik Untuk Kenderaan Dua Alam UTeM. Project Report. UTeM, Melaka. (Submitted)

Ammar , Mohd Saufian (2007) Roboclip (Pencengkam). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ammar Abdullah, Hussein Al-Hegazi (2015) Material Characterization Using Microwave Resonant Sensor. Project Report. UTeM. (Submitted)

Ammar Alfaiz, Mustaffa Albakri (2011) Design And Fabrication Of A Semi Automatic Gear Shifting Mechanism For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ammer Ezhar, Mohd Razalli (2015) Fatigue Analysis Of Steering Knuckle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amni, Mohamed Zain (2010) Disaster Alert Intelligent System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Yunus (2006) SPM Questions Centralized System With SMS Announcement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Abdul Hanan (2018) Design And Fabrication Of Flippable Car Hazard Triangle Using Car Floor Mat As Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Ammar Syafi (2023) Design and analysis of low-cost twin-screw filament extruder. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Amran, Fatin Afiera (2017) Handwriting Analysis Using IMU For Small Handwriting Size. Technical Report. UTeM, Melaka. (Submitted)

Amran, Mohamad Affendi (2017) Development Of Uninterruptible Power Supply Using Variable Voltage Regulator For Low Power Devices. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amran, Mohamad Ikhmal (2017) Design,Analyze,Optimize And Fabricate A Bodywork Structure Of Modular Food Truck. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amran, Mohd Firdaus (2018) Effect of electron beam radiation on the dispersion of graphene nanoplatelets in nylon66 based polymer composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amran, Muhammad Aimman (2017) Design And Development Of Car Alarm System Using SMS Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Nur Hazira (2018) The Correlation Between Machinibility And Surface Roughness In CNC Lathe Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Nurul Aini (2016) Design And Development Of Switchable Matched Bandstop To Bandpass Filter Using Ring Resonator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amrik Singh, Phuman Singh (2009) Modeling And Simulation Of 14 DOF Vehicle Dynamics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amril Az, Mat Yasir (2006) Wireless Bluetooth Digital Oscilloscope. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amrul , Omar (2008) Suspension Geometry Analysis Of Formula Varsity Race Car. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amrullah Firdaus, Abdul Shukor (2012) Influences Of Transformer Winding To The Performance Of DC AC Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amuthan, Arjunan (2005) Design Of DC-DC Power Supply. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amzah, Mohd Nuralim (2016) Development Of Portable Air Compressor By Using A Battery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amzar , Mat Yunus (2011) The Study On The Effect Of Faroarm - 3D Laser Scanner In Different Scanning Depth, Scanning Angle And Temperatures Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amzar Azfar, Zolkiflie (2015) Application Of Microfiber Sensor For Determining Olive Oil Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amzar Hijazi, Shubli (2011) Analysis Of Mechanical Properties Of Inorganic Adhesive Based Composite Using Finite Element Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

An Efendi, Hizrian (2016) Battery Flat Preventer Device Design For Car Based On Bang-Bang Controller Of Current Limiter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

An Nawawi, Ahmad Thamin (2015) Performance Evaluation Of A3 Topology Control In Wireless Sensor Network. Project Report. UTeM. (Submitted)

Anaam, AbdulRahman Taher Ahmed (2017) Study Air Flow Distribution In The Dryer System Through CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anas, Azmi (2008) Rekabentuk Mixer Untuk Kenderaan Berkuasa Gas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anas Imran , Ghazali (2007) An Analysis Of Network Performance At Kementerian Perumahan Dan Kerajaan Tempatan Using Opnet Modeler. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Anas Mujahid, Mohammad Khair (2013) Mechanical Behaviour & Water Absorption Of Metal Matrix Composite (TN+Rice Husk) Fabricated Via Permanent Mould Casting - ( Experiment with 10% And 25% Of Rice Husk). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anbalagan, Munusamy (2009) Application Of XY Table Continuous Motion Programming With PC Based Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Andrew , Arih (2007) Stress And Deformation Analysis On PCB Depaneling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Andy, Heng Poh Seng (2015) Tracking Performance Of A Hot Air Blower System Using PID Controller With PSO And Harmonic Search Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Andy, Low Foo Hwa (2015) Face Recognition Using Principal Component Analysis With Support Vector Machine Classifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Ling Yuen (2013) Simulation Of Intelligent PID Temperature Controller. Project Report. UTeM, Melaka. (Submitted)

Ang, Soon Chang (2013) Design And Development Of Tactile Detection By Using RFID Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Chee Hang (2019) Design And Development Of Chlorine Control System For Swimming Pool Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ang, Chi Yuan (2014) A Study Of Eco-Innovation In Small And Medium Enterprises (SME) Manufacturing : A Case Of Selangor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Kuan Kee (2015) Vehicle Detection And Counting From Unmanned Aerial Vehicle (UAV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Leslie (2018) Underwater Remotely Operated Crawler (ROC) Leg-Like Wheel Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Ruo Li (2016) Potential Study On Wind Turbine Generation By Vehicles Vortex On Highways. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Sei Qi (2010) Develop A Linear Measurement Sensor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Siew Khim (2018) Effect Of Stitching On Kenaf Woven Fabric Embedded Thermoplastic Binder System In Intraply Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ang, Wai Chun (2018) Development Of Ticketless Parking System Using License Plate Recognition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ang, Wei Pin (2015) Energy Adaptive Power Management System Using MPPT Techniques For Energy Scavenging In Mobile And Wireless Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Wei Pin (2016) Energy Adaptive Power Management System Using MPPT Techniques For Energy Scavenging In Mobile And Wireless Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang Wei, Yih (2012) Data Acquisition System For Solar Panel Monitoring. Project Report. UTeM, Melaka Malaysia. (Submitted)

Anis Niza, Ramani (2013) Design and Analysis Electrical Energy form Clay Soil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anis Niza, Ramani (2012) Improvement Of Grounding System For High Voltage Laboratory FKE UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anis Suhaila, Mohd Zain and Mardiana, Bidin and Niza, Mohd Idris and Siti Khadijah, Idris and Zahariah, Manap (2005) Wireless Temperature Sensor Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aniza, Othman and Rosleen, Abd. Samad and Hidayah, Rahmalan and Norasiken, Bakar (2010) Feature Extraction Software Tool (Fest:Colour) Colour Extraction of Images and 3D Visualization of Colour Histogram in Cielab Colour Space. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anna Marie , Almodiel (2008) Study On Fracture In Low Carbon Steel Using Bend Specimen With And Without Carburizing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Annapoorani, Raman (2012) Laboratory Equipment Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anne Siaw Fung, Wong (2006) Self-Powered Distance Detector Using Vibration Based Power Generation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Annuar Hashim, Muhammad Arif (2016) Development Of Building Application Noise Barrier Using Sandwich Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Antasya , Mohd Arif (2006) Analysis Of Different Current Setting In OTC DR 4000 Robot Welding For Mild Steel. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Anuar, 'Izzat Haiman (2009) Intelligent Vehicle Navigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Mohd Sabri (2008) Lecturer Room Director/Message Board. Project Report. UTeM, Melaka Malaysia. (Submitted)

Anuar, Abu Bakar (2017) Fungsi Kebarangkalian Ketumpatan Lekuk Penghampiran Dalam Penilaian Keboleharapan Pengeluaran Sistem Kuasa Hidro. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Amanina Zahidah (2016) Development Of Home Appliances Controller Via Phone System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Jaafar and Muhammad Noorazlan Shah, Zainudin and Mohd Muzafar, Ismail (2013) Modelling And Analysis Of Bit-Communication Behaviour In Artificial Swarm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Muhammad Ikhwan Shafiq (2018) A Study Of Heart Rate According To Age Group Via Internet Of Things. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Muhammad Syahmi (2018) Performance Analysis Of Long Range Sensor System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Anuar, Nasri (2017) Foreign Material Detection In Agarwood Using Thermal Imaging Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Nur Athirah (2018) Study On Energy Comsumption Of Different Blade Sharpness For Grass Cutter Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Nur Syaidatina Farahin (2023) Development of river cleaning robot using IoT technology. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Anuar, Nurul Husnina (2017) The Effect Of High Frequency Wave In Vibro Acoustic Method For Crack Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Shairazi Akmal (2019) Development Of Aquarium Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Siti Zahrah (2016) Modelling And Analysis Of Sensorless Permanent Magnet Synchronous Motor By Using Fundamental Excitation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Siti Zahrah (2016) Modelling And Analysis Of Sensorless Permanent Magnet Synchronous Motor By Using Fundamental Excitation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar , Muhammad (2006) Study The Wear On High Speed Steel (HSS) Cutting Tool By Variable Parameters Turning Operation. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Anuar , Ngadengon (2008) Design And Development Wireless Camera Controller Using PIC 16F84A. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar , Piji (2007) Modeling And Analysis Of Desmodromic Valve Train. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Anuar, Fatin Alia (2015) Optimization of hybrid microgenerator based on electromagnetic and piezelectric. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Anuar, Mohd Syarizal (2015) Effect of different coating layer of alkali niobate (knn) thin film through sol-gel technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar , Mohamed Kassim (2011) Research and development on motion control for one legged type hopping robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar Falellah , Mohd Nurul (2016) Design Multiband E-Shaped Fractal Microstrip Patch Antenna With Defect Ground Structure (DGS) By Using Graphene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar Haszuad, Abdul Halim (2008) PC Based Device Switching Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar Jeffry , Rohim (2007) Design And Development Amateur Radio Transmitter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuarulnam, Ramli (2013) Counterfeit Banknote Detection & Counting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anura, Ahmad Kamil (2015) The Effect Of Dispersion On Optical Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar, Ruksana (2016) Concept, Design And Implementation Of Solar Powered Smart Waste Bin Management System With Odor Sense. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar Muhibbuddin, Noh (2009) Design And Development Of Inclined Batch Dryer (IBD) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar Muhibbuddin, Noh (2009) Design And Development Of Inclined Batch Dryer (IBD) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar Naimi, Arsat (2015) Study On The Properties Of Parts Manufactured Using Fused Deposition Modeling (FDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar Sa'adon, Muhammad Fazlin (2018) Development Of Smart Hydroponic Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anwaruddin, Amirah Nadiah (2016) Portable LED Dot Matrix Display Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aqilah, Othman@Omar (2006) Two Level Power Car Alarm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aqmal, Hashim (2013) Remanufacturing Analysis By Using Failure Mode And Effects Analysis (FMEA) For Engine Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aqmal Hisyam, Hamzah (2015) Remotely Operated Contruction Robot Tele-Operation Command And Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arbaeyah, Abdul Razak (2013) Optical Solitons Simulation In Single Mode Optical Fiber Over 40GB/S. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ardika Ridal, Awang (2013) The investigation of turbo generator on exhaust manifold in spark ignition engine. Project Report. UTeM, Melaka. (Submitted)

Arfah, Saaid (2005) Pembangunan Alat Electropalatograf. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arfah , Ariffin (2009) Wheelchair Movement Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Argenan, Kugan (2017) Development of a simple robot with human-robot interaction (HRI) features. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arham, Nurul Famyza (2016) Integrated Microwave Bandpass And Bandstop Filter To Multifunction Operation In Wireless Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arham Mustaqeem, Ismail (2015) Performance Analysis Of Cascaded Optical Amplifier With Different Loop Length. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aribbin, Mohd Nazifi (2009) Study On Noise Level From The Effect Of CNG Tank Installation In Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arief, Mostapah (2013) Design Of S-band Microstrip Bandpass Filter For S-Band Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arief Ezmee , Jumodi (2008) Infrared Detector. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Arieff Ridzwan, Yussuff (2011) Synthetic Hybrid Laminate Composite Using Recycled Plastic Bag For Hardboard Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arif, Ahmad (2010) Numerical Prediction Of Solid Waste Combustion In An Updraft Gasifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arif Affendi , Che Hamid (2011) Multiplayer Networked Game Over LAN And Quality Of Service Issues. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arif Hadafie, Idris (2005) Kawalan Peralatan elektrik Berasaskan Mikro Pengawal Menggunakan Isyarat DTMF. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariff, Idris (2011) E-Maintenance System Based On Condition Monitoring : An Approach To Real Time Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariff, Afif (2015) Development Of Wind Turbine Generator Trainer Set Using PIC System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariff, Nor Azimah (2018) The Study Of Surface Roughness For AISI 1018 Using Boron Steel Cutting Tool Texture In Wet Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariffin, Ab Razak (2016) HVAC Monitoring (Temperature) And Controlling (Valve/Damper) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariffin, Nur Amelia (2017) Development Of Small Energy Generation From Vehicle Movement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ariffin , Hashim (2007) Research On Mechanical System Used In Oil And Gas Industry (Research And Improve Mechanical Seal). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariffin @ Mohd Saufi, Mohamad Assif (2016) Optimization Performance Of Fiber Optic Sensor On Fully Synthetic Test Oil For Engine Traditionally Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arifin, Afiqah (2014) Customer Acceptance On Espring Water Treatment System In Southern Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arifin, Nizar Fikri (2019) Development Of Ubiquitous Vehicle Tracking System Based On Mobile Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arika, Aris (2005) Development Of Electronic Machanical Design System (E-MechSys) For Consultancy Services : Plumbing And Sanitary Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arina , Zakaria (2010) Study On Shock-Absorbing Properties Of Square Tube Strengthening Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arisita Duwi, Sapit (2010) Design Of Power Amplifier For Radio Over Fiber Technology (ROF). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariston Shah, Azmeer Shah (2017) Performance analysis of industrial robot under loaded conditions and various distances. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arman Shah, Abdullah (2009) Design Of Timing Chain Cover Assembly Jigs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arom Karoman, Muhammad Fadzil (2019) Cutting Force Measurement Of Natural Fiber Reinforced Polymer Matrix Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arshad, Munirah (2015) Sleeping Sensoring And Alerting Devices For Drivers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arumugam, Navine (2017) Development Of Shoe Dryer Using Microcontroller With GSM Module. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arumugam, Sativelo (2008) Automated QA Inspections Using Vision Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arumugam, Solament (2019) Investigation Of Voltage Of Strained Rubber Sheet Using Strain Gauge-Voltage Measurement System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arzmi, Muhammad Syafiq (2015) Design and analysis of the optimum gate size for single cavity plastic name card holder injection mold. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Asaari , Mohd Muji (2007) CS-8 Humanoid Robot (Body). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asbullah, Sukri (2007) Hardware Development Of Mixture Drinks Dispenser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aseri, Nur Amanina Syazwani (2018) A Study On The Effect Of Physical, Mechanical And, Morphological Properties Of Pineapple Leaf Fiber Reinforce Cornstarch Biodegradable Plastic Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asfaezuddin , Zakaria (2009) Analisa Perpindahan Data Model Surface Di Antara Platfom CAD Yang Berbeza. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ashaari, Nur E'zatty Ashiqin (2017) The Effect Of Physiological And Physical Experimental Factors In Aerospace Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ashafi'e , Mustafa (2013) Tribological properties of nanoparticles as lubricating oil additives. Project Report. UTeM, Melaka. (Submitted)

Ashari, Nurul Syahira (2022) Development of RFID safe box with biometric access using microcontroller. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ashok, Rajandran (2011) Interfacing Of Microcontroller To Circulator Using Embedded C Programming In Development Of Fiber Optic Surface Roughness Measurement Using Time Of Flight. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ashrol, Sarip@Shariff (2005) Development Of Uninterruptible Power Supply (UPS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asir, Nor Farhana (2017) Thumbprint Automatic Attendance System & Door Access By Using GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Askari, Rahmah (2018) The Influence Of Sol Volume And Heating Temperature On Ti02 Sol-Gel Coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aslah, Mohd Zaim Afiq (2017) A study of future of manufacturing in the context of developing countries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Asleeda , Ahmad (2008) Six Sigma (DMAIC) Implementation In Industry. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Asmadi, Mohamad Nur Ikhmal (2023) Comparative study on the effectiveness of cementitious and elastomeric waterproofing materials to comply with ASTM D5957. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Asmah , Ahmad (2007) Develop Hardware For Automatic Baby Milk Mixer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asmai, Siti Azirah and Abal Abas, Zuraida and Hasan Basari, Abd Samad and Abdul Rahman, Ahmad Fadzli Nizam (2005) Design And Development Of Palm Oil Mill Maintenance Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asmawi , Hidayatul Syakira (2015) Design And Development Of Miniature Size Automatic Storage And Retrieval System (ASRS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asmida, Asri (2015) Pigeon Hole Smart Box For University Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asmir, Mohd Farid (2018) Development Of 10.5 Ghz Fixed Wireless Access Antenna Using CST. Project Report. UTeM, Melaka. (Submitted)

Asniza , Muhidin (2007) Automated Juice Mixer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asok Max , Subramaniam (2013) Active Suspension Control Of Ground Vehicle Heave And Pitch Motion. Project Report. UTeM, Melaka. (Submitted)

Asraf Ali, Muhammad Saiful (2016) Development Of Classroom Noise Detector Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asreen Anuar , Abd Aziz (2007) Design A UWB Amplifier Based On CSSDA For UWB Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asri, Ezzat Muhammad Syahmy (2022) Early detection system for home flood prevention using arduino and IoT. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Asri, Muhamad Zhariff (2017) Development Of Elementary School Drone Kit Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asri Khalid, Mohd Subari (2014) 3D Reconstruction Image Using Single Low Resolution Web Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asru Rozimin , Abu Bakar (2007) Programming And Interfacing Master Slave (Parent-Child) Robot For Painting Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asrul Izwan , Mohd Salleh (2007) Roboclimb (Body And Traverse). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asyraf, Amir (2011) The Development Of Adaptive Lighting System For Motorcycles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asyraf , Abd Razak (2012) Energy Efficient Of Automatic Ceiling Fan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asyraf Taqiuddin, Ahmat Tahir (2012) Curve Tracer Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asyul Sultan Saidi, Zulhelmi (2018) Effect Of Cogon Grass Fibre On The Thermal, Physical And Environmental Characteristic Of Thermoplastic Cassava Starch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Atan, Ali Syahiran (2019) Performance Analysis Of Path Planning Algorithm For Autonomous Mobile Robots. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Atifa Faaidha, Munauwer (2012) Development Of Prototype Neutral-Less Time Lag Power Switch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Atiqah , Abdul Wahab (2011) QoS Of Live Video Streaming Over IPV4 IPV6. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aun, Khor Yong (2008) Analysis Of Data Exchange In CAD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aurther , Chow Zha Khang (2011) Wideband SPDT Switch For Rf Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aw, Fang Li (2011) Self-Monitoring Traffic Light System For T-Junction Or Multiple Junctions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awaludin, Arif Nazmi (2009) Lecturers Students Friendly Attendance Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, A’bdul Rahman (2018) An Investigation On Gasoline Engine Misfire Fault Using Multi Sensors And Analyzing With Vibration Signal Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Muhammad Faiz (2018) Vibration Statistical Analysis (VSA) Of Gasoline Engine's Abnormal Valve Crack By Accelerometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Nik Nur Amiera (2019) Preparation And Characterization Of Nanocellulose Derived From Waste Office Paper Prepared By Acid Hydrolysis Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Awang, Nurul Nadiah (2017) Investigation Of Friction Characteristics Of SAE 15 W40 Conventional Engine Oil With Nano Additive. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang @ Rozalli, Ahmad Sofwan (2016) Design Of Ultimate Shield For Fire Fighting Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Man, Karimah (2008) Car Park Gate Control System Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Mu'Awaludin, Ahat (2006) Computer Aided Education For Control Systems: Pid Controller Design Of Closed-Loop Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Muhammad Mursyidin, Ahat (2009) Control Of A Real Inverted Pendulum Using PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Zawawi, Dayang Ezzatul (2017) Bandwidth Enhancement Of Multiband Microstrip Patch Antenna For Wimax Application. Project Report. UTeM, Melaka. (Submitted)

Awangku Mohd Hazmin , Awang Zainal (2010) Study Of The Effect Of Variable Speed Fan On The Radiator Cooling System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ayeob, Mohd Azizi (2017) Comparison DC And AC Of Inclined Plane Test (IPT) For Tracking And Erosion Of Insulating Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ayob, Muhammad Amirul Shafiq (2016) Experimental Investigation Of Front Sprocket Failure Of Fixed Bicycle Using Acoustic Emission And Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayob, Muhammad Hilmi (2019) Development Of Smart Aquaponic System For Eco School Project. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ayob, Muhammed Syameel (2017) Parameter-properties relationship of thin plate welding by ColdArc technology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ayop Azmi, Faiz Aswad (2017) Improve Of Design And Analysis Of Hydraulic House Fence Opening Using Tap Water Pressure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayu Fateha, Abdul Hamid (2015) Lean Manufacturing At Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayub, Asyraf (2016) Study On The Use Of Statistical Approach To Assess Environmental Noise Pollution From Batu Berendam Industrial Estate Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayub, Nurhan (2017) Investigation Vehicle Cabin Noise Using Arduino Data Logger. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ayuni Hamizah, Abdul Rahman (2011) Performance Analysis Of IPv4 To IPv6 Tunneling Mechanisms. Project Report. UTeM, Melaka. (Submitted)

Ayuob Sultan Saif, Alnadhari (2017) Effect Of Foil Width In Magnetostrictive Transducer On The Excited Longitudinal Wave In Pipe. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azaha, Muhamad Azim Hamzi (2023) Development of smart weather monitoring system using IoT. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azahar, Hafizah Auni (2018) Analysis Of Doppler Effect On The Performance Of LTE Downlink Transmission Using MATLAB. Project Report. UTeM, Melaka. (Submitted)

Azahar, Muhd Afif Fikri (2016) Improvement Of Radial Distribution Network With Distributed Generation (DG) By Using Improved Genetic Algorithm (IGA). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azahar, Muhd Afif Fikri (2016) Improvement Of Radial Distribution Network With Distributed Generation (DG) By Using Improved Genetic Algorithm (IGA). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azahari, Salleh and Abd Shukur, Ja'far and Mohamad Zoinol Abidin, Abd. Aziz and Zulkifli, Shariff (2010) RF Front End Design Of Radio Access Point For Radio Over Fiber Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azahari, Salleh and Abd Shukur, Ja’far and Mohamad Zoinol Abidin, Abd. Aziz and Zulkifli, Shariff (2010) Reconfigurable Beamforming Network By Using Passive Phase Shifter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azahari, Salleh and Mohamad Harris, Misran and Nik Azran, Ab. Hadi (2011) Design Of Power Amplifier At 5.2 GHz For Radio Over Fiber Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azaimmy , Maksid (2009) Kajian Kegagalan Statik Dan Lengkokan Ke Atas Menara Penghantaran Elektrik Dan Kaedah Analisis Unsur Terhingga Menggunakan Perisian Berkomputer MSC/NASTRAN-PATRAN. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azali Firdaus, Mohd Yusoff (2011) Traffic Light For Construction Safety System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azam, Muhammad Firdaus (2016) Fingerprint Attendance With GSM Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azam , Ahmad (2006) The Development Of A Hydraulic Flow Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azan, Amar Shafiq (2016) Development Of An Automated Helmet Dryer Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azan Hariz , Ab Latif (2010) Nonlinear Controller For Gantry Crane Based On Partial Feedback Linearization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azane Azran, Mohd Latif (2006) A Study On The Annealing Process Of Aluminium Bronze Alloy Based On Their Microstructure Growth And Mechanical Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azdiana , Md Yusop and Noor Asyikin, Sulaiman and Roseliza, Yatim and Siti Halma, Johari (2011) An Adaptive Input Shaping Scheme For Vibration-free Positioning Of A Gantry Crane System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azdiana , Md Yusop and Noor Asyikin, Sulaiman and Roseliza, Yatim and Siti Halma, Johari (2011) An Adaptive Input Shaping Scheme For Vibration-free Positioning Of A Gantry Crane System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azelan, Aimi Nur Atirah (2014) Research And Development (R&D) Management And Its Impact On Firm Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azemi, Mohd Qhaireel (2019) Development Of Low Cost 3-Axis Desktop Router And Plotter Machine For Educational Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azemi, Muhammad Zikri Hakim (2017) Kajian Mengenai Minyak Biji Sesawi Sebagai Bahan Api Alternatif Untuk Enjin Diesel Satu Silinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azemin, Masyhadi (2016) Design and analysis of optimum clearance of an open small thimble blanking die. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azfar Nazmi , Nikmatlah (2010) Validation Of Bar Vibration By Using FEA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhanuddin, Danial Hafizuddin (2018) Analysis Of Assessment On The Muscle Fatigue Associated Towards Male And Female Drivers. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Azhar, Anuar (2015) Penyiasatan Perambatan Gelombang Akustik Terhadap Lapisan Konkrit Struktur Bertetulang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Mohamad Amin Ariff (2015) Design, Install And Monitor Of Hydronic Radiant Cooling System In An Enclosed Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Mohamad Azrul Nizar (2017) Ferroresonance Mitigation Method Using Active Filter In Voltage Transformer (VT). Technical Report. UTeM, Melaka. (Submitted)

Azhar, Mohamad Suhairy (2018) Smart Home Monitoring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Azhar, Mohammad Ashraff (2017) Development Of Speed Control For An Electric Bicycle By Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhar, Muhammad Hazim (2019) A Study Of A Cascaded H-Bridge Multilevel Inverter (CHB-MLI) Performance Based On Particle Swarm Optimisation (PSO) As A Controller. Project Report. UTeM, Melaka. (Submitted)

Azhar, Nur Hazlin (2019) Experimental Analysis On Vibration Energy Regeneration System Using Piezoelectric Sensor For Wideband Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhar, Siti Hajar (2022) Study on wear performance of heat treated thixoformed aluminium alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhar , Ahmad (2010) Optimization Of Coil And Permanent Magnet Of Linear Oscillatory Actuator For High Thrust Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Anis Afuza (2015) Investigate surface roughness of aluminium alloy 2024 under wet and dry conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhari, Keliwan (2005) Noise Detector And Motion Sensor Surveillance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhari, Keliwan (2005) Noise Detector And Motion Sensor Surveillance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhari, Muhamad Aimran (2018) Analysis Of Efficiency On Different Types Of Fuel For Perodua Car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhari, Nur Afifiah (2015) Preliminary Study Of The Availability Of The Using Gear Lube Oil Based On Local Palm Oil For Transmission Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azharuddin, Soher (2011) Deployment Of Indoor Test-Bed Deployment For Wireless Mesh Network Using D-Links Router. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziah, Khamis and Intan Azmira, Abdul Razak and Azhan, Abdul Rahman and Nur Hakimah, Ab. Aziz and Hyreil Anuar, Kasdirin and Kyairul Azmi, Baharin (2010) Design and Development of Solar Power Mover. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azian Kamaruddin, Rabiatul Adawiyah (2016) Design And Development Of Radial Line Slot Array Antenna At 28.00 GHZ. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azianashima Heedayu, Zainal (2009) New Design Using Fiber Glass Composite (FRPC) For Jimny Back Door. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azidzin, Mohd. Ridzaudzin (2009) In Campus Communication system Using Optical Principle And Techniques (Reciever). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azie Noor Marlia, Ruslan (2015) Design Analysis Of A Baby Stroller By Using Design For Manufacturing And Assembly Method (Boothroyd Dewhurst). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azilah, Harun (2011) Staff Attendance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azilah, Mohamed Yunos (2011) Animated Digital Comic In 2D : Maiden's Last Dance. Project Report. UTeM, Melaka. (Submitted)

Azim Fauza , Md Khair (2008) Develop A Motor Speed System Using An Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azimi, Ab. Rashid (2011) Ergonomics Assessment Of Sheet Metal Cutters. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azimidon, Nurul Balqish (2016) Android Monitoring System For Home Security Using Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azinuddin Akmal, Abdul Aziz (2010) Design And Development Of An Automated Sorting System In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azira, Abd Rahman (2009) Smart Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azis, Ahmad Faizal (2016) Incorporating Flywheel Hybrid Module In Automobile : Simulation And Analysis Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azis, Nurul Atikah (2015) Study Of Coating Properties For Aircraft Aluminum Alloy Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Ahmad Zuhairi (2016) Contribution Of Lightweight Materials To The Design And Manufacturing Of An Electric Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Azrull (2016) Monitoring And Determination Of The Appropriate Equivalent Cylinder Radius For Axially Compressed Steel Cone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Iza Nuriza (2016) FPGA-Based Arduino Architecture Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Izzatul Liyana (2018) Analysis Of Earth Leakage Circuit Breaker (ELCB) Nuisance Tripping Due To Earthing Resistance Value. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aziz, Khairul Azha A (2011) Real-time face recognition system using radial basis function neural networks. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Aziz, Muhammad Fikri (2017) Real Time Video Processing For Drone-Based Lightning Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aziz, Muhammad Haziq (2016) Incorporating Flywheel Hybrid Module In Motorcycle : Simulation And Analysis Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Muhammad Najib (2015) Design Of Chilled Floor System For Cooling In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Nor Azimah (2018) Effect of heat treatment on mechanical properties of equal channel angular pressing (ECAP) processed A356 aluminium alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aziz, Nurniqmah (2019) Minimization Of Unnecessary Inventory By Using The Application Of Pulling System In Manufacturing Industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aziz, Nurul Afina (2018) Development Of Human Fall Detection System For The Elderly. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizah, Shaaban (2008) Fabrication and evaluation of magnetic ceramics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizan, Alyssa Nur (2019) Smart Solar-Based Gardening System Using Arduino Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizan, Aniza Nazirah (2018) Time study and work measurement implementation in manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizan, Mu'az (2016) Development Of Hydroelectric Generator By Using Piping System In Emergency Situation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizan, Noor'ain (2016) Strength analysis of IC package through the impact of dynamic load. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizan, Nurul Sakinah (2019) Impact Behaviour Of Coconut Shell Reinforced Polymer Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizan Firdaus, Mohamad (2007) Kawalan Frekuensi Lampau Lebih Dan Kurang Pada Model Turbin Gas Menggunakan Pengawal Tambahan Logik Fuzzi. Project Report. UTeM, Melaka. (Submitted)

Azizi, Adnan (2005) Design And Fabrication Of Test Jig For Motorcycle Suspension Performance Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizi , Kamaruddin (2007) Design And Development Path Finding Robot Using Line Tracking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizi, Muhammad Azizul Raziq (2018) Ankle Rehabilitation System For Sprain Ankle Patient's. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Azizon, Abdul Aziz (2006) Muslim's E-Planner Website. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizuddin, Abdul Aziz (2009) Kekuatan Gentian Kaca Berlamina. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul , Ahmad (2008) Integrated Filling And Capping System In Bottling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul , Mokhtar (2007) Line Balancing And Optimization For Single Model Assembly Line At A Small Medium Industry (SMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hakim, Kamardin (2015) The Effect Of Piston Head On The Performance Of Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hakim, Noor Zubairi (2015) Portable Power Generator From Renewable Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hakim , Mohamud (2009) Investigation On Relationship Between Ultrasound Faults With Hot Spots On Incoming Cable At Distribution Transformer. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azizul Halim, Abd Rahman (2010) Fiber Optic Based Line Following Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hilmi , Ahmad (2008) Topology Optimization In Automotive Bumper Beam Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan, Abu Samah (2009) Modeling Distance Protection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan, Mohamad (2008) Analisis Pengangkat Galah (Pole Lifter Analysis). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan, Muhammad Afiq (2019) Design And Development Of Square Hole Digging Ground Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azlan, Muhammad Fitri Aiman (2017) Investigation On Tool Paths Programming Strategies Using CATIA V5 To Fabricate Biomedical Application On Simultaneous Five-Axis CNC Milling Machine. Project Report. UTeM, Melaka. (Submitted)

Azlan, Norsabrina (2023) The mechanical properties of 7075 Al-T6 cold sprayed with 6065 aluminum powder. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azlan, Surahman (2015) Friction Analysis Of Common Engine Lubricant In The Market For UTeM Formula Varsity Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan , Othman (2006) Development Of Low Cost MRP Software For A Manufacturing Process. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Azlan Kamil , Mohammad Fauzy (2006) Self Oscillating Dimmable Electronic Ballast. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan Soffian, Borhan (2015) Estimate The Life Cycle Of Roller By Experiment And Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azli, Muhammad Asyraf (2017) Numerical Solution Of Nanofluids Flow And Heat Transfer Over A Moving Surface With Thermal Radiation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azli, Siti Nurazeera (2017) The Effect Of Number Of Blades On Compressor Cascade Bladesperformance By Using 3D CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azli Imran , Alias (2008) Robot Mudah Alih Kawalan Motor Servo RC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlilawati , Ishak (2008) Vehicle Protection System From Water Flooding. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azlina, Abdul Latip (2008) WLAN Low Noise Amplifier Using HBT Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlina, Basharudin (2011) Smart Incubator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlinda, Mohamad (2013) Optimization Of Injector Gun Design Using Design For Manufacturing And Assembly (DFMA) At The Conceptual Design Stage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlinda, Mohd Nor (2008) Flame Imaging Using Ultrasonic Based Tomography. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azly, Nur Hidayah (2017) Influence Of Chemical Modification On Energy Absorption Of Starch Modified Natural Rubber Based Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Mat Sari (2011) Design And Development Of An Automatic Bicycle. Project Report. UTeM, Melaka Malaysia. (Submitted)

Azman, Mohd Talib (2005) Design For Environment In Electronic Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Abdul Muizz (2018) Investigation On The Effectiveness Between A Residential Modern Roof Design And Traditional ‘Malay-Style Kampung’ Roof Design In Malaysia To Accommodate Rainwater Drainage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Amierul Syazrul Azril (2018) Real-Time Modelling And Implementation Of A Flood Observatory System (FOS) On IoT Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Fatin Nabila (2018) Load Classification Using Self-Organizing Map (SOM) And Correlation Analysis For Optimization. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Hamzah (2007) XY Palletizing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Mohamad Al-Bukhari (2016) Mobile Phone Charger Design Using Telephone Line Based On Bang-Bang Control Of Buck Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Mohamad Izmul Fareez (2023) Shelter based design method of a lightweight and portable by using coconut fiber reinforced polypropylene (PP) honeycomb panel for typical. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azman, Mohammad Nur Shafiq (2017) Development of light Pneumatic Artificial Muscle (PAM) for positioning task. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Mohd Arshad (2017) Development Of An Electronic Board That Identify And Check The Functionality Of The Commonly Used Arduino's Component (Assorted Component Checker). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhamad Azri (2016) Design Of Backup System For Solar-Powered Air Conditioning By Using Condensed And Evaporated Accumulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhamad Hillmi Nadim (2019) Sound And Vibration Analysis Of Portable Air-Conditioning System Using Peltier Module As Power Source. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Muhamad Nurikhmal (2018) The Performance Evaluation Of Real Time Fire Alert System Based On Internet Of Things (IoT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhammad Faiz (2017) The Influence Of Refrigerant Charging For Non-Ducted Split Unit 1 Horsepower Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhammad Haidir (2022) Development of IoT based home system automation using arduino. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azman, Muhammad Luqman (2022) Electrical properties of natural rubber reinforced Tin Dioxide Nanocomposites with different filler 98 loading for electrical insulators. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Muhammad Najmi (2017) Bees algorithm hybrid with Hooke method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Nor Azatul Fasya (2017) Elimination of product shortage at dispatch line in manufacturing industry by using lean tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Nur Azziana Afifie (2016) Concept, Design And Implementation Of Solar Powered Smart Waste Bin Management System With Level Sense. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Nuramira (2021) Corrosion Monitoring Of Galvanized Steel Under Chloride Rich Environment Using Potentiostat Testing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Nurfidhah (2018) Investigation And Development Of A Data Acquisition System For Blood Bank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Nurul Azliyana (2016) Development Of Public Transportation (Bus) Notification Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Rashid Sidek (2016) Development Of Arduino Based Secret Door Knocking Pattern Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Syarmine Afiqah (2018) Investigation of welding parameters effect on welding distortion of conventional gas metal arc welding (GMAW) and cold arc. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Yuhanis Aqilah (2017) Preliminary Study On The Effect Of Spray Coatings Parameter On Hydrophobic Coating Surfaces. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman , Amiruddin (2008) Control Of Ball And Beam: Comparison Between Lead/Lag Compensator And State Feedback Controller (SFC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman , Ismail (2009) Simulation And Experimental Investigation On A Pneumatically Actuated Active Suspension System Using Gain Scheduling PI Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman Hafiz, Hj Abd Majid (2006) Analysis And Optimization Of Heat Recovery System For Process Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman Shah, Muhammad Faridzwan (2019) Development Of Rice Cooker Integrated With Arduino Controller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azme, Amirul Fikri (2018) Analysis On Different Length Of Sensor Area Towards The Performance Of Fiber Optic Sensor For Refractive Index Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmeer Zakki , Mohd Harith (2009) Robot Dance Using 68000 Microprocessor Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Awang Md Isa and Zahriladha, Zakaria and Fauzi, Mohd Johar (2007) In-Flight Prayer Times And Qiblat Direction Using GPS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Mohamed (2006) 3D Advertisement Info 'Visit Malaysia Year 2007'. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Mohd Fairus Firdaus (2012) Flow Modelling Of Nasal Cavity With Various Flow Rate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Ahmad Hariz (2021) A magnetic charging connection for a quadcopter drone. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Ainur Natasha (2022) Application of 7QC tools to analyze defect reduction at a remanufacturing company. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azmi, Azrull Fazren (2016) Grounding Monitoring System For Retaining The Property Of Grounding Protection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Azuwar (2017) Experimental Study On The Effect Of Vortex Generator To Aerodynamics Performance Of Aerofoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Husna 'Izzati (2017) Design And Development Of Wireless Barking Intruder Alarm For IoT Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhamad Izwan Aiman (2023) Experimental study on thermal conductivity performance of oil palm fiberpolyester panel with aluminum honeycomb sandwich. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azmi, Muhamad Sahrul Izwan (2017) Active Suspension System Using Stability Augmentation System For Passenger Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Aliff Isyraq (2017) Comfort Parameters Tuning For Vehicle Suspension Pitch Motion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Azizan (2019) Effect Of Stretchable Conductive Ink Dimensions On Electrical Conductivity. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Faris (2018) Driving Comfort Studies For Different Absorber Content : Hydraulic Oil Versus Pressure Gas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Nur Fudhail (2018) The Investigation On Mechanical, Physical And Environment Properties For Different Method Of Fabrication On Cornstarch Composties Reinforced By Pineapple Leaf Fibre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Syairul (2018) Development Of Pico Turbine System On The Downspouts Using Rain Water. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Zaim (2018) Effect Of Type Of Substrates To Conductive Ink Under Thermal Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Norhashima (2015) Assessing a system reliability: a case study in manufacturing company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Norsyafiq Amirulamry (2017) Effect of citrate bath composition and heat treatment process on the properties of electrodeposited Nickel-Fly Ash (Ni- FA) composite coating on aluminium alloy 7075 substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Nur Amirah Ilyana (2018) Performance Analysis Of VHF Interferometer Between Original And Filtered Signals Based On Signal Processing Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Nur Suraya Amirah (2018) Design And Investigation Of Wideband Antenna For In-Building Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Nurul Amielia Hidayah (2016) Development Of Anti-Theft Surveillance System With Cloud Based Pictures Storage By Using Image Processing Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Nurul Shahirah (2019) Development Of Personal Safety Box Using QR Code And Image Processing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi Ali, Muhammad Hanis (2016) Comparative Study On The Different Range Of NIR Sensor Measurement For Glucose Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmida , Abd Aziz (2006) Redundancy Of Load Balancing For Websites. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Azmin, Ahmad Faris (2016) Human robot interaction (HRI) using simple, interactive robots. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmin , Ahmad (2010) The Effect Of Thermoelectric Power Generator (TEG) Based Hi-Z Thermoelectric Modules On The Performance Of 1.3L 4G13 Wira Engine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azmir, Mat Zain (2010) Design Of MR Fluid Base Brake System For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmir, Abu Samah (2010) Optimization Of Louvered Plate Angle Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmira, Ahmad (2015) Investigation Of Impact Ionization Of Photodiode Using The Lucky Drift Theory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azra Suzzana , Wahab (2008) Stock And Inventory Control System Using Radio Frequency Identification (RFID). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrai, Muhammad (2010) Programming Of An Automated Pick And Place Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azri, Mukhtar (2011) Analyzing Of Http and Https Protocol And Comparison Using Packet Sniffer Tools On Three Operating Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azri Safwan, Abdul Halim (2011) The Effects Of Metal Inert Gas (MIG) Process Condition On Hardness Of Stainless Steel Claddings Of A Carbon Steel Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azril, Othman (2005) Design And Fabricate An Open-Circuit Miniatute Sized Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azril Shafizam, Mohamad (2015) Experimental Investigation Of Engine Performance And Emission For Biodiesel At Various Storage Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrin, Aqilah Husna (2018) Microwave Assisted Transesterification Of Jatropha Oil Over Natural Waste Cockles Catalyst Of Biodiesel Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrin , Maharani (2008) Design And Model Making Of Hemming Jig For Car Door Assembly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrin , Mohamad Effandy (2007) The Improvement And Fabrication Of New Breather Valve For Oil And Gas Industry. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Azrina, Abdul Halim (2013) Process Of Abrasive Grinding Computer Numerical Control (CNC) Machine To Grind Tooling And Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrina, Mastor (2007) Sistem Kawalan Automatik Menggunakan Penggesan Ultrasonik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul, Aziz (2006) Ergonomic Aspects Of Design Functional Cart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul , Jasni (2007) Portable Cocoa Bunch Wrapping Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul Affendi, Atan (2010) Design Optimization Of A Boiler Furnace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul Hafez , Mohamad (2013) Study Of Design And Fabricate Driving Simulator. Project Report. UTeM, Melaka. (Submitted)

Azrul Hiza , Muhamad Azraai (2007) Rekabentuk Kipas Penyejuk Segar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azuan , Abdul Aziz (2008) Optoelectronic PH Meter With Display. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azuraini, Muda (2007) Membangunkan Sistem Perisian Untuk Kawalan Litar Elektrik Menggunakan Suara. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azwan , Baharudin (2010) The Analysis Of Current Carrying Capacity Of PCB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azwarni, Mohamad (2009) Effective Implementation Of Process Capability Index Cpk In Minimizing Reject Rate For Batch Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azzad Firdaus, Zolkepli (2008) Electronic Combination Lock Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

B. Mohd Saipudin, Muhammad Afiq (2017) Soil Condition Sensor Development And Wireless Monitoring Using ESPresso. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baba Noor, Nuratiqah (2012) Natural Convective Heat Transfer In Square Enclosure With Partition On Top Wall. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bachok, Muhammad Yusuf Khatir (2014) Passenger Satisfaction On Information Towards The ITS Components Of Rapid Kuantan Bus Service. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badek Ruzaman, Badiu Nasrullah (2019) Evaluation Of Electrical Conductivity(EC) For Fertilzer Solution Of Venturi Fertilizer System (VFS) Using Design Of Experiment(DOT) Analysis For Agriculture Fertigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Badeli, Siti Yuhainiazwa (2016) Applying Process Failure Mode And Effect Analysis (PFMEA) Approach By Using DMAIC To Improve Product Quality Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrolhisam , Jaafar (2007) Analisis Pembetulan Faktor Kuasa Menggunakan Kapasitor Statik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Amri, Abdul Rahman (2006) Merekabentuk Konsep Dan Model Jek Kereta (Alat Bantu Kecemasan) Jenis Mekanikal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Azman, Muhamad Syafiq (2019) Analysis Residual Voltage Of Surge Protection Device(SPD) Based On Grounding And Coordination. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Badrul Hisham, Ahmad (2013) Design Of Switchable Matched Bandstop Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Hisham, Ahmad (2012) Pin Diode With Dumbbell Shape Of Defected Ground Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Hisham, Ahmad and Redzuan, Abdul Manap and Noor Azwan, Shairi (2011) Design And Development Of Rectangular Waveguide Bandpass Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Hisham, Ahmad and Mohd Nor, Husain and Kim See, Tan and Zulkifli, Shariff and Noor Azwan, Shairi (2011) Design And Development Of Substrate Integrated Waveguide Bandpass Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Hisham, Muhamad Bazli Nabil (2021) The Effect Of Divergent Angle On A Convergent-Divergent Nozzle Using CFD. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Badrulhisham, Mohammad Zulkhairi (2016) Adjustable Power Monitoring System (APMS) For Daily Usage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrulzaman Khan, Elyssa Elnna (2018) Investigation on the tribological and hardness properties of nickel-quarry dust composite coating prepared by various surfactant contents. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bagas, Wardono (2009) Advance Machining of Industrial Graphite Electrodes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bagas, Wardono and Sivarao, Subramonian (2008) Quality And Performance Analysis Of Laser Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahari, Norhazilina (2007) Insulated-Gate Bipolar Transistor (IGBT) Inverter With Vector Modulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahari, Faqrul Izzat (2019) An Investigation Of Bearing Faults Using Vibration Meter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahari, Mohamad Aizat (2016) Analysis Of Fin And Hole Effect Towards Air Velocity And Energy Absorption During Impact Test For Bicycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahari, Muhammad Najib (2018) Digital Image Correlation On Piping Condition Monitoring Using Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahari, Rafida (2018) Parameter Tuning For Proportional-Integral-Derivative Controller In Gantry Crane System Using Simulated Kalman Filter Algorithm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baharom, Mohamad Faizal (2009) Time And Current Grading For IDMT Relay Setting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharom, Mohamad Faizal and Sulaima, Mohamad Fani and Mohd Dahalan, Wardiah and Abdul Kadir, Aida Fazliana and Bohari, Zul Hasrizal and Napis, Nur Faziera (2017) A Fundamental Study Of Distributed Generation Sizing And Allocation Simultaneously By Using Improved Evolutionary Swarm Particle Optimization (IEPSO) For Loss Minimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharom, Syazwani (2014) Electrochemical behavior of electroless ternary nickel (Ni-W-P) alloy deposit on iron substrate in 3.5WT % NaCI solution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baharuddin, Kholilul Syahmiaizad (2018) Investigation Of Water Spray Cooling Technique On Photovoltaic Panel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baharudin, Muhammad Dhiauddin (2016) Quasi-Static And Dynamic Compression Behaviours Of Biocomposites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharudin, Muhammad Syukri (2018) Effect Of Stitching On Jute Woven Fabric Embedded Thermoset Binder System In Intraply Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharudin, Nor Afrina (2020) Preparation And Characterization Of Seaweed Nanopowder Via Acid Hydrolysis Method A Critical Review. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baharudin, Norshamira Aizat (2022) Productivity improvement in SME industry by using time study and work measurement analysis. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Baharudin, Zikri Abadi and Ab Ghani, Mohd Ruddin and Mat Hanafiah, Mohd Ariff and Zainon, Maslan and Abdul Rahman, Ahmad Idil and Din, Asri (2014) A New Lightning Flashes Characterization Technique For Lightning Detection System Using Internet-Scale Pattern Recognition Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahran, Ali Izzuddin (2016) Identification And Parameter Estimation Of Multifunctional Prosthetic Hand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahran, Ali Izzuddin (2016) Identification And Parameter Estimation Of Multifunctional Prosthetic Hand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahri, Mohd Abu Zar (2016) Development Of Magnetorheological Damper Test Rig Machine For Automotive Suspension. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahruddin, Nur Farhin (2023) Through user requirement to design wheelchair improvement by integrated QFD, AHP and TRIZ method. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Baizura, Baharin (2006) Electronic Watchdog. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bakar, Mohamad Basir (2023) Development of single side polished plastic optical fiber intensity-based sensor for humidity detection. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Bakar Redin, Luqman (2018) Automatic Irrigation System With IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bakri, Julian (2018) Development Of Non-Woven Fabric Supported Functionalized Multi-Walled Carbon Nanotube(MWCNT)/Polyethersulfone (PES) Membrane For Water Treatment In Sarawak Rural Area. Project Report. UTeM, Melaka. (Submitted)

Bakri, Nur Nadiha Tasha (2019) Ergonomics Design Of Walking Chair For Disable Children In Classroom. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bakrulazi, Siti Aishah (2022) A comparative study of surface roughness, tensile strength, microstructure, and porosity of the un-dried and pre-dried PETGTPU FDM filaments. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bala Subramaniam, Parthiban (2018) Sensitivity Study On Front Suspension Hardpoint Of Formula SAE Race Car Towards Vehicle Dynamics Characteristics. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Balai, Lorita Lawi (2016) A study to propose solution on palm oil mill screw press machine breakdown using QC tools. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Balakrishnan, Thenarasu (2018) Development Of Car Warning & Tracking System Using IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Balan, Kavina Nishanthini (2018) Design And Development Of Material Characterization Using Microwave Signal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Balan, Vivien (2018) Analysis And Development Of Grid Connected Front-End AC To DC Converter Using Voltage Oriented Control (VOC). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Balu, Kaartik (2023) Effect of surrounding temperature to tensile strength of polyvinyl alcohol (PVA) nanofibers structures. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ban , Shu Wen (2008) Smart Kart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bapokutty, Omar and Dhar Malingam, Sivakumar and Rivai, Ahmad and Subramonian, Sivarao and Selamat, Mohd Zulkefli (2018) Fabrication Towards Mechanical Properties Of Aluminium-Kenaf Fibre Reinforced Hybrid As Biodegradable Light Weight Composite Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Basaruddin, Nur Asheera (2017) Design, Development And Of Microstrip Antenna For Short Range Communication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Basiron, Muhammad Amirul (2018) Parking For Disabled People By Using Radio Freqeuncy Identification (RFID) And Global System For Mobile Communication (GSM). Project Report. UTeM, Melaka. (Submitted)

Baskaran, Ashvinaa (2017) Design and development of RFID metal-based items tracking system for automotive manufacturing plant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Basrey, Zafirah (2017) Bandwidth Enhancement Of Reconfigurable Planar Inverted-F Antenna (PIFA) For GPS Band Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Basri, Nursyafienah (2019) Development Of An Electronic Board Game Of Dam-Haji For Encouraging New Generation To Play Traditional Game. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Basri, Siti Nur Athirah (2018) Improvement of building and facilities maintenance performance : satisfaction of occupants and users. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Basri, Syahrul Zhafri (2019) Study Of Thermal Effect On Viscosity And Surface Tension Of Metalworking Fluids. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Batumalay, Kalaiselvan (2018) Design & Development Of Multiple Spin Type In Table Tennis Trainer Controlled Via Android Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bazlina , Basarahim (2006) Network Cable Tester With LCD Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bebe Sabrina , Abdullah (2005) Transmission Line Models For Coordination Of Surge Protective Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bee, Shei Er (2017) Design And Development Of An Ultra-Low Power CMOS Voltage Regulator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bee, Sheng Chong (2018) High Speed 3D Printing Strategy Using 6 DOF Non-Mobile Robot Manipulator Based On Shortest Distance Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Beh, Teik Siong (2007) LED Bending Machine Fixture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Beh, Eik Zhen (2017) Introductory Of Dimple To Ahmed Body Top Surface As A Drag Reduction Device By Using DoE Appraoches. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Benny Doimin , Mohd Zamlan (2007) Switching Mode Power Supply Using Buck-Boost Converter-Continous Mode. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Berahima, Mohd Luqman Hakim (2023) Design and development remote control (RC) solar plane. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Bernabas, Kesavan (2019) New Design Of Knee Locking System For Knee Support Health Device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bernados, Mohd Zairunshah (2018) Development Of Automatic Gamelan Mechanical Player Using Arduino Microcontroller And NDFEB Magnet. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bernard, Joe Baxter (2019) Development Of Vehicle Plate Number And Identity Card Recognition For Guard House Using OpenCV. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bidzani, Norshamimi Diana (2016) The Planning Of Handover In 4G Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Birang, Katerina (2016) Formation of cobalt-doped zinc oxide photocatalyst for synthetic methyl orange degradation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Blangkat , Ahmad Basimin (2006) Self-Sustaining Solar Powered Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bok , Chiew Loon (2010) Emission Characteristic Of Alkaline-Catalysts Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bong , Kuan Fung (2009) Engineering Design Analysis On 5 Kg Payload Gripper For Comao Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Bong , Siaw Wee (2008) Vibration-Free Positioning Of A Gantry Crane System With Inverse Dynamic Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Boo, Jia Min (2018) Development of new standard operation procedure configuration for disassembly work. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Boon, Kah Seng (2012) A Prototype Of An Intelligent Lighting Control System Powered Via Photovoltaic Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Borhan, Luqman Hakim (2017) The Effect Of Number Of Blades On Turbine Cascade Blade Performance By Using 3D CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Borhan, Muhammad Afif (2023) Automatic radio frequency identification gate system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Borhan, Muhammad Sauffi (2019) Research Of Magnetic Shock Absorber With Using Spring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Borhannodin, Nurul Nadiah (2016) Blood Glucose Detection Using GSR Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Briyatharsini, Ramu (2018) Disturbance Rejection Analysis For Wastewater Treatment Plant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bubin, Rabiah Aduwiyah (2016) Factors To Enhance Productivity By Utilising Waste Management In Malacca Manufacturing SMEs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bunyamin, Yahaya (2006) Cooling Tower In Steam Power Plant: Its Performance Regarding The Flow Rate Control And Water Make Up Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Burhanuddin, Mohd Aboobaider and Mohammad Ishak, Desa and Zeratul Izzah, Mohd Yusoh and Sazalinsyah, Razali (2007) Rekabentuk Dan Pembangunan Sistem Penyelenggaraan Mesin Kilang Pemprosesan Makanan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Buyong, Zulhafiz (2016) Conveyor Speed Control Application Based On PID Control Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

C. Chemban, Swarna Latha (2017) Implantable In Body Antenna Design At Medical Implant Communication Service Band For Telemedicine Application. Project Report. UTeM, Melaka. (Submitted)

C. Prem Anand, Chandia Sekhara (2011) Low Maintenance Aquarium - Automatic Controller System For Water Level Sensor, Temperature And Food Dispenser System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Carla Regina, Yaling (2015) Design And Simulation Of Go-Kart Active Rear Spoiler Air Foil Shape Using Computational Fluid Dynamics (CFD) Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Carvyn, Blaise (2015) A Fibre Optic Sensor On Acetone Concentration Detection Using Beam-Through Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cassandra, Leong Chai Ee (2015) Development Of PIC Based Safety Vehicle System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Catherine Foo , Wei Li (2007) The Development Of Malay - English Bilingual Mobile Dictionary For Java Mobile Phone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Catherine Muna , George Malang (2009) High Frequency Electronic Ballast Protection. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ch'ng, Choo Waey (2011) Optimizing Nymber Of Booths : Case Study At Post Office. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ch'ng, Swee Guan (2018) Development Of ROV For Orientation Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ch'ng, Yau Yau (2015) Online Face Recognition System Using Artificial Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chah, Gan Peng (2005) Utilization Of Empty Fruit Bunches As A Combustion Fuel To Generate Steam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chahit, Dyana (2017) Effect Of Different Pyrolysis And Annealing Temperature On Structural And Electrical Properties Of K0.5Na0.5(NbO)3 Thin Film. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chai, Chi Kong (2005) Study On The Application Of Variable Speed Drive To Achieve Cost - Effective Electricity Saving. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai, Jiuan Hua (2008) Design And Development Of Plastic Injection Mould With Concurrent Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai, Agatha Yan Hong (2017) Improving Inventory Management Using Open Source Software Enterprise Resource Planning (OSS/ERP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai, Fong Ling (2017) Validation of Kinect-RULA system for workstations assessment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chai, Yong Pin (2011) Propagation Coverage Using Ray-Tracing Technique (For Outdoor Scenarios). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai, Ze Qin (2016) Wireless Home Switch Using Arduino UNO. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai , Sen Shin (2011) Performance Evaluation Of Hybrid Raman And Erbium Doped Fiber Amplifiers (HFAs). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chairulsyah, Abdul Wasli and Abdul Rani, Othman (2008) 58 GHz power amplifier, a development amplifier using microstrip technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chakravarthy Gopala Krishna, Kaliappan (2005) Semi Auto Filling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Hong Ket (2010) Study Of Internal Heat Exchanger Effects On Car Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Horng Tat (2010) Study On Haar Classsifier For Machine Learning System That Can Detect Specified Object In Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Seng Kiong (2008) Line Detecting Mobile Robot For Delivering And Receiving Loads To Different Set Points. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Siew Yien (2011) A Study On Isolation Performance Of Pin Diode With Defected Ground Structure (DGS) For RF Switch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Tai Tiong (2006) Process Planning For CNC Milling Machine. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Chan, Wai Teng (2010) PC Based Motor Control With SMS Aplicatoin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Wai Weng (2009) Influence Of EDM Machining On Surface Integrity Of SKD 11 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Xin Zhi (2012) Laser Range Finder Scanning System For Tree Diameter And Circumference Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Yi Xian (2010) Analyzing VOIP With Video Conferencing In IPV6 Platform. Project Report. UTeM. (Submitted)

Chan, Yun Kim (2012) INTEGRATING QUALITY TOOL ON IMPROVING OVERALL EQUIPMENT EFFICIENCY IN AUTOCLAVE PROCESS: CASE STUDY. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Zhi Hao (2013) Development Of Self-Powered Dual-Axis Solar Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Alan Kah Poh (2008) The Study Of The Effects Of Surface Roughness Of Loggerhead Sea Turtle Shell In Relation To Drag Coefficient. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Albert Bao Der (2019) Design And Develop A Vertical Take-Off And Landing Fixed-Wing Hybrid Unmanned Aerial Vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Chee Hoong (2017) FEM analysis on face milling of Inconel 718. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Chen Hua (2018) Suppressing Structural Vibration Using Multiple Arrays Of Linear Dynamic Vibration Absorber (DVA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Chin Wei (2011) The Minimization Of 5.75GHz Chebyshev Band Pass Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Chun Hong (2021) Flow analysis of airfoil with mechanical slat and flap using CFD. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Chun Yew (2015) Design Of Rectifying Circuit With Improved RF-DC Conversion For RF Wireless Power Transfer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Guan Zen (2009) LCD Display Of Lab Status. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, How Wan (2008) Design And Development Of Embedded Controller For Control Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Hui Teng (2018) Degradation behaviour of pineapple leaf fibre reinforced poly lactic acid under stimulated conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Jien Yang (2018) Development Of RF Energy Harvesting Multi Controlled Floor Vacuum Cleaner Using Wi-Fi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Jing Ting (2017) Improving Densification Of Alumina-Based Ceramic For Cutting Tool By Using Different Sintering Profiles. Project Report. UTeM, Melaka. (Submitted)

Chan, Kai Yang (2018) Fault Detection And Diagnosis For Water-Cooled Chiller System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Kin How (2018) The Impact Behaviour Of Hybrid Kenaf/Glass Fibre Reinforced Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Lisen (2017) Design And Develop An Energy Harvesting Circuit. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Sheat Lee (2017) The Development Of An Automatic Accident Alert Respond System Through IoT (AARS System). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Sok Er (2023) Study of vibration on machinery faults in shaft using statistical analysis method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Wai Kit (2022) Performance of AISI 1045 steel of simulation turning process base on previous experimental result. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Chan, Yean Kwan (2016) Redesign warehouse storage and retrieval system at apparel industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan , Bee Ngo (2008) Turtletron Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Chow Khuen (2008) Design And Development Of A Control System Based On Engine Speed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Kien How (2011) An Assessment Of Queuing System At Polyclinic Community Ayer Keroh. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Kok Thai (2008) PC Based For Power Failure Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Mei Yee (2009) The Study Of The Aggressive Turning Process On Aluminium For Automotive Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Shia Fen (2007) 2D Edutainment For Child's Right Brain Development. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Chandi, Mohd Afiq (2017) Electronic Walking Stick For Visual Impaired. Project Report. UTeM, Melaka. (Submitted)

Chandran, Devaagar (2016) Investigation phenomena of flank wear at initial stage during cutting process of stainless steel 304. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chang, Boon Hai (2011) Low Cost Mobile Power Generator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Ling Kwai (2013) Portable Physiotheraphy Limbs Rehabilitation Robot - Structural Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Siang Yee (2008) The Compatibilizing Effect of Coupling Agent on the Morphological Properties of Banana Fibre as Reinforcement for Polymer Matrix Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Chia Wen (2017) Improving Production Planning Using Open Source Material Requirements Planning (OSS/MRP) Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Chu Shen (2016) Sleep Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Han Bing (2021) Design & analysis of propeller blades for a small-sized UAV. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chang, Lee Peng (2017) UTeM Vehicle Sticker Recognition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chang, Pei Woon (2019) Improving Inter-Person American Sign Language Recognition Accuracy Using Deep Learning. Project Report. UTeM, Melaka. (Submitted)

Chang, Shi Mei (2015) Design Of Control Unit/Data Path For Production Monitoring System Using FPGA Based On Overall Equipment Effectiveness (OEE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang , Hin Fuat (2008) A Study Of Corrosion Behaviour Of Aircraft Components Material : Anodized Aluminium 2024-T3. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chang , Nen E (2007) Omni-Directional Hexapod Walking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang , Weng Soon (2008) Corrosion Behaviour Of Steel For Simulated Concete In Choride Aqueous Solution. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Charlseak, Charisa (2017) Design, Analysis And Development Of Frame, Body And Mechatronic System For A Tennis Court Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chau, Kar Hoo (2015) Panic Sensing And Spontaneous Stability System To Avoid Accident. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chau, Man Siang (2011) Electromagnetic Levitator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ab. Hamid, Mohamad Nor Hafiz (2016) Develop standardization work of coil setup at pressing machine : a case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Abd Razak, Nur Liyana Syahirah (2023) The investigation of environmental sustainability on industry 4.0 readiness considering Malaysia cultural preference. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Che Ali, Mohd Hafiez (2008) Rekabentuk Sistem Pemanas Air Suria. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ali, Fatin Shahieda (2016) Analysis And Development Of Low Power And Portable 12V DC To 220V AC Inverter. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Che Ammar Faizal, Che Hamzah (2011) Fruit Recognition System (Harum Manis Mangoes). Project Report. UTeM, Melaka. (Submitted)

Che Arbaei, Nur Adlin (2017) Ergonomic Risk Factor That Contribute To Discomfort And Vibration Analysis While Riding Train. Project Report. UTeM, Melaka. (Submitted)

Che Awang, Mohd Norazizi (2017) Determination Of Wear Metals In Automotive Lubricating Oils Using UV Spectrometry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Bakar, Siti Munirah (2018) Logic Gate Simulator : Development Of An Electronic Educational Simulator To Produce Karnaugh Map By Logic Gate Combinational Circuit Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Deraman, Nurul Farhanah (2017) The Importance Of Lean Manufacturing Practices Towards Enhancing SMEs' Productivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Engku Roziana , Che Engku Harun (2008) Pembaharuan Pada Sistem Kunci Kereta (Proton Wira). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Hamdan, Muhammad Arif Farhan (2023) Signal detection for centrifugal pump using signal analysis of data acquisition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Harun, Muhammad Harraz (2016) Development Of A Mobile Robot Vision For Object Detection And Tracking Using Pixy Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Hassan, Siti Nuranisa (2016) Development Depth Video Processing Using Stereo Vision Technique In Sport Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Hassim, Muhammad Dzulhelmy Che Hassim (2019) Design Of Experiment (DOE) Based Approach In Optimizing Finishing Parameters Of CNC Machining Toward Surface Roughness. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Ibrahim, Noraiman Naim (2023) Square ventilation air duct modelling and validation and the effect of angle change using variable air flow. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Che Japar, Muhammad Jamal Hafiz (2019) Development Of Garbage Monitoring Systems By Using Ultrasonic Sensor To Help The Sanitary Agency Monitor The Garbage In Area. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Jusoh, Noor Farah Izzati (2020) Effect Of Different Inkjet Print Parameter On Quality Labelling For Different Flexible Printed Circuit Board Materials. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Jusoh, Nur Ain Syafiqah (2018) Power Supply Design Using Microcontroller-Based Buck-Boost Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Kamariah , Babjan (2007) Develop A 5.8ghz Chebyshev Bandpass Filter Using Microstrip Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ku Junoh, Sahida (2016) Design of model reference adaptive control (MRAC) for machine tool applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Ku Mohd Saifulazwan , Che Ku Ali (2009) Morse Code Translator Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ku Norazma Adawiyah , Che Ku Aziz (2008) Design And Experimental Study Of Keris Mould Using Doe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Lah, Muhammad Ariff Affian (2018) Optimization Of Graphene Field-Effect Transistor (GFET) Using Taguchi- Based GRA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Manshor, Miftahuddin (2016) The Development Of Hydrogen Generator By Using Water Electrolysis For Small Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mansor, Muhamad Syahir (2017) Rekabentuk Sistem Pengudaraan Bilik Berkuasa Suria. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Che Mat, Rosli (2012) The Study Of Energy Saving On ACMV (Air-Conditioning And Mechanical Ventilation) System For FKM Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mat, Abdul Azim (2016) Development Of A New Die For The Manufacturing Of Telekom Malaysia Berhad (TM) Metal Based Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mohamad Aidil Hafizie, Che Mohd Rawi (2011) Murai Jaya Log Tracer Using RFID System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mohd Elyas, Che Omar (2010) Investigation Of Shaft Speed Cause By Turbo System In Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mohd Khairul, Che Lah (2007) Merekabentuk Litar Pendail Automatik Untuk Sistem Keselamatan Rumah Bersepadu (IHSS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mood, Muhammad Amir Usamah (2016) Dielectric Sensing (Capacitive) On Cooking Oil's TPC Level. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Munira , Che Razali (2007) Graphic Equalizer And Power Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Musa, Muhammad Faiz (2016) Fatigue Life Simulation Of Spot Weld Joint Structure Based On Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Noh, Hanis Amirah (2017) The Nose Shape Design Of Bullet Train Using High Profile Curve. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Othman, Khairulnisaq (2011) 'Back To Basics' Project. Project Report. UTeM, Melaka. (Submitted)

Che Razak, Ahmad Fadzrul Nizam (2019) Analysis Of Electrical Characteristics In Strained Si/Sige N-Channel MOSFET Device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Razak, Amir Asyraaf (2019) A Conceptual Design Of Automotive Passenger Compartment Cooling System By Using Solar Power. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Roizimi, Muhamad Shafiq (2016) Development of cutting technology for cutting polymer foam material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Roslan, Mohd Hafizul (2017) Comparative Study Of Moisture Impact And Breakdown Voltage Of Various Transformer Insulating Oil Types. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Roslee, Che Remle (2010) Short Term Load Forecasting With Time Series Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Rozaida , Che Mod (2009) Design Improvement On Support System For Resin Based 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Saidi, Muhammad Syarifuddin (2023) Application quality functional deployment model in form features and Kansei vocabularies for masjid chair design. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Che Shaari, Murni (2017) Comparatives Studies Of Load Frequency Control (LFC) Using Proportional Integral (PI) Controller And Fuzzy Logic (FL) Controller For Two Area Power System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Soh , Mohd Norhisham (2009) Forward Kinematics Solution For 5 Degree Of Freedom Of Rhino XR-3 Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wahab, Muhammad Syahir (2018) An Innovative Automatic System Design To Start-Up Engine For Preheat Session Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wahab, Nor Fatin Izzati (2018) Effect Of Humidity On The Mechanical Performance Of Joints Bonded With Electrically Conductive Adhesive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Wan, Muhamad Farid (2016) CFD Simulation Of Fluid Flow Parameters In Junction Of Aircraft Hydraulic Pipe System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wan Mazlan, Che Wan Mat Zin (2010) Sound Detecting Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wan Nurul Hidayah, Che Wan Zakaria (2008) Pic Tape Measure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wan Shah Rizam, Che Wan Yem (2006) Controlling Device For Automation Of Heat Flow In Confined Spaced. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Zulkarnain, Che Ain Zulaikha (2017) Determination Of Weighted Efficiency Equation For SB3000HF Inverter. Technical Report. UTeM, Melaka. (Submitted)

Chea, Kah Mun (2017) Design Of High Viscosity Batter Dispensing System To Enhance The Productivity Of Kuih Bahulu. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chea, Meng Huat (2014) Development Of Home Energy Management System (HEMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Yee Mun (2013) Modelling and experimental investigation on perforated plate mobility. Project Report. UTeM, Melaka. (Submitted)

Cheah, Voon Lu (2007) Design And Implementation Of A Warehouse Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Choon Wah (2004) Virtual Local Area Network For Control Network Traffic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Dow Sheng (2017) Effect Of Different Thickness Of Chrome Spray On The Exhaust Pipes. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheah, Yin Min (2019) Quadcopter Reprogrammable Virtual Path Follower Design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheang, Shing (2017) Design Of Product Packaging For Product Brand Communication Based On Consumer Responses. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chee, Chew Yen (2011) Line Balancing Using Simulation In Semiconductor Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Chew Yee (2023) Investigation of nickel oxide / perovskite interfacial in inverted perovskite solar cell. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chee, Eric Sai Hoo (2009) PID Of An Inverted Pendulum. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Jiann Tong (2010) Develop A Rotating Speed Sensor System With Link To Visual Basic.Net. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chee, Kai Sin (2017) Development of an automated coolant system for CNC machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chee, Wen Xiong (2016) Performance Analysis On Domestic Appliances Efficiency For Energy Saving Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Yik Pei (2017) Implementation Of Information, Decision And Action (IDA) Method In Overall Equipment Effectiveness (OEE) To Improve Manufacturing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Ying Chen (2018) Study On Single Strut Formation Using Additive Layer Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee Fai, Tan and Sarban Singh, Ranjit Singh (2013) Design And Development Of An Interactive Concurrent Engineering Design System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chek San, Mohamad Khairul Azwan (2016) Design And Analysis Of SIW Bandstop Filter For Interference Suppression In X Band Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chelliah, Ratnadevi (2017) Incorporating space division at initialization phase of bees algorithm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chelvakumari, Arumugam (2010) Plant Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Pick Wei (2010) Study On Computer Aided Manufacturing (CAM) Software For A XY Table Positioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Jian Sing (2016) Implementation Of RSA Encryption And Decryption On FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Kok Leong (2018) ABB IRB 120 Robot Writing Programming And Design Of A Pen Holder Tool Mechanism To Write On A Paper. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chen, Wei Ping (2018) Design Of Energy Harvesting Powered Wireless Sensor Network For Machinery Health Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Wei Wei (2018) Tribological Performance Of Hybrid Composites Based On Palm Kernel Activated Carbon And Alumina Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen , Siew Teen (2011) Optimization On Manufacturing And Assembly Of The Existing Outdoor Swing. Project Report. UTeM, Melaka Malaysia. (Submitted)

Chen , Pei Ling (2009) LAN VoIP System (LVoIP). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Cheng, Kar Lock (2013) GSM Based Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, Ngee Siong (2017) Optimisation Of The Mechanical Properties Of The Engineering Plastics Via Optimal Processing Parameters Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, See Yuan and Mansor, Shuhaimi and Mat Yamin, Ahmad Kamal and Boejang, Hambali (2019) Yaw Angle Effect On Flow Characteristic Of Rear-Roof Spoiler Of Road Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, Wei Chiat (2016) Five Axis Tool Path Programming Utilizing CATIA V5 Single Blade. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng , See Yuan and Herawan, Safarudin Gazali and Tee, Boon Tuan and Lee, Yuk Choi (2006) The Effect Of Building Shape Modifications On The Performance Of Wind-Driven Natural Ventilation Of Low-Rise Building Using Computational Fluid Dynamics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng , Yuan We (2008) Tensile Properties And Morphology Studies Of Polymeric Biocomposite. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Cheng Hwai, Aw (2006) A Study On Precipitation Hardening Of 6061-T6 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheok, Yong Seng (2007) Manually Guided Robot With Minimum 5Kg Of Load. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheok, Yan Qi (2019) Development Of Home Use Ankle Rehabilitation Device Using Force Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheong, En Yi (2010) Smart Car Alarm System Using Pic Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong, Chi Cheng (2021) Finite element modelling on single and nested mild steel tubes under quasi- static lateral loading. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheong, Kai Mun (2016) Determination of the influence of chemical treatment to the strength of FDM used part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheong, Xian Shung (2019) Design Of Piezoelectric Energy Harvesting Circuit For Human Interaction Application. Project Report. UTeM, Melaka. (Submitted)

Cheong, Yew Ching (2022) A comparative analysis of fused deposition modelling machine performance. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Cheong, Yew Wai (2009) Automatic Lighting System For Children. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong , Teik Keon (2008) The 4-Dof Parallel Robot Fabrication And Design Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong , Lang Ley (2007) Dance School Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong Jia, Pin (2017) The Effect Of Different Shapes And Perforated Hole Of Direct Recycling Hdpe Plastic As Reinforcement In Concrete Structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew, Lai Huat (2011) Integrated Product Design And Optimization Of Multiplex Electrode Holder For ARC Welding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Chee Seng (2017) Development of decision making process for fused deposition modeling machines selection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew, Chin Ong (2016) Air-Conditioning & Mechanical Ventilation And Lighting Retrofit Through Building Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Choy Wen (2014) A Study Of Consumer Perception On Nanotechnology In Cosmetic Products In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Jun Kai (2023) Performance of local exhaust ventilation (LEV) using computational fluid dynamics (CFD) based on motor pulley adjustment of fan law. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Chew, Jun Ren (2017) Enhanced Performanced Of Circular Polarized Antenna By Using Metasurface. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew, Sze Siang (2017) Design Of Tri-Polarized Antenna. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew, Yong Hao (2018) Development Of Filter Test Rig To Determine Filter Efficiency Based On Three Different Angle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew , Heng Boon (2008) Determination Of 3-Dimensioanl Robot Workspace And Safe Working Area Using Computer Software. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chey , Long Sheng (2011) Sliding Mode Control (SMC) In Friction Compesation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chi, Lai May (2016) Analysis and improvement of extrusion machine breakdown in solder wire manufacturing operation using QC tools. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chia, Clement Kuan You (2013) Voice Recognition Robotic Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Pooi Ching (2013) Preparation Of Spent Tea Leaves Filled Polyurethane Composites For Sustainable Sound Absorbing Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Pooi Ching (2013) Preparation Of Spent Tea Leaves Filled Polyurethane Composites For Sustainable Sound Absorbing Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Anddy Kok Lik (2015) No Load Loss Calculation Of 90MVA 132/33kV Power Transformer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Shong Hee (2018) Design And Analysis For Development Of Natural Based For Scale Model Furniture Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Wei See (2019) Multiple Face Detection For Surveillance Systems. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chia , Hwee Siang (2009) Investigation Of Turbine Blade Failure And Stress Distribution By MSC Nastran Patran In Cargo Ship Turbocharger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia , Keh Mok (2008) MP3 FM Modulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiam, Chun Hong (2017) Integration of an automated guided vehicle system with a programmable logic controlled material handling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chiam, See Luan (2010) Bluetooth Quiz System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiang, Carrey Wai Liong (2019) Artificial Wave Producer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chiang , Kok Wai (2009) Optimization Of Machining Parameters In Laser Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chieng, Jun Yuan (2019) Design And Fabricate An Efficient Rotating System For Mini Hydro Power Turbine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chiew, Angeline Yuen Huei (2018) Development Of Monitoring System Database For Inventory And Material Handling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Chiew, Shet Yee (2017) Work posture improvement at plastic printing process in plastic manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chiew, Thiam Huat (2016) The Communication, Skill And Knowledge That Affect 5S Methodology Toward Performance Improvement In Paper Mill Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiew , Tsung Heng (2011) Cutting Force Compensation Analysis Using Sliding Mode Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Francis Jun Hau (2013) Robust Positioning Control Of Magnetic Levitation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Gee Sing (2011) Development Of Automatic Quality Control System Using Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kat Meng (2008) Design Validation And Development Of Plastic Injection Mould Cavity For Plastic Container Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kok Yet (2010) A Sensorless Speed Identifier Using Adaptive Digital Filtering Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Wai Pick (2010) Study Of Aircraft Propeller - Structural Strength. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Chun Yok (2017) Design And Development Of Vacuum Forming Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chin, Ee Ling (2018) Consideration of hand grip strength in the hand grinder handle to improve subjective comfort and work productivity. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chin, Jia Yu (2017) The Effect Of Flow Frequency On Heat Exchanger Used In Thermoacoustics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kah Chun (2020) Degradation Behaviour Of O-Ring Elastomer Subjected To Palm Biodiesel Immersion. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chin, Kah Yin (2016) An Analysis Of Lard By Using Dielectric Sensing (Impedance). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kar Ghai (2015) Mobile Air Conditioning Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kean Mun (2017) Formation of cobalt doped zinc oxide photocatalyst. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chin, Khai Hong (2017) A Tangible Programming Solution To Develop Computational Thinking: Programming Block Recognition Using Convolution Neural Network. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chin, Kwang Yhee (2016) Energy Efficiency In Water Pumping System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Shi Hui (2012) An Application Of Linear Programming In Aggreate Planning A Case Study At Electronic Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Sin Yi (2015) A Portable Embedded Gas Leakage Detection Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Yi Shian (2010) An Application Of P Control Chart To A Pager Assembly Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Zhen Yan (2017) Development Of Automatic Air Humidity And Temperature Controller With Purifying Function Controlled By Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin , Feei Ping (2009) Design And Analysis Of Robot Manufacturing System For Automotive Industry. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chin , Soon Hwa (2008) An Evaluation On Capacity Of Casting Industry By Using Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin , Su Fok (2007) Degradation Behavior Of PVC-LDPE Blend. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Chiong, Li Shen (2017) A triz approach to reduce cycle time in semiconductor test process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chip, Wai Yein (2012) Mobile Health Encyclopedia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cho, Hon Meng (2015) Turbulence Modeling Verification For Bluff Body Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choe, Chee Foong (2017) Propose And Design A Tricycle With Cleaning Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choi, Yoke Pool (2009) Development Of Low Pressure Water Hydraulic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choir, Yek Guan (2022) Characterization of biaxially oriented polypropylene (BOPP) films containing baggy web defect. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Chon, Yu Yun (2016) Preparation and characterization of nano-alumina filled HDPE conducting polymer composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Kok Hee (2009) Expansion Of Input / Output PIC OMRON CJ1GCPU42H Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Kooi Lim (2013) Design on fall detection system using Micro-Electro-Mechanical System (MEMS) accelerometer and gyroscope. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Mei Ching (2012) Livestock Autofeeding And Monitoring System (LIFE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Min Po (2012) "You Have Mail" A Pigeon Hole Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Pei Ching (2009) Design An Automated Storage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Chean Yee (2019) Identification Of Pipeline Cracking Area In Underwater Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Eric Mun Hong (2017) Development Of Non-Contact Level Measurement Inspection System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Fei Ming (2017) To Design An Innovation Coconut Plucking Rod With Advance Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Hong Leong (2018) Improvement Of An Indoor Environmental Quality (IEQ) In Engineering Laboratories. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Ivan Wei Yang (2017) Optimization And Development Of A Low Power Microcontroller For IoT Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Jia Ming (2015) Optimizing operator cycle time in a semiconductor company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Man Yuen (2010) Bidirectional Converter For Renewable Energy Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Peh Han (2018) Design And Analysis Of Passive Knee Exoskeleton. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Shiau Ling (2017) Optimization Of Flexural Strength For ABS Plastic Via Optimal Processing Parameters Using Taguchi Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Wai Yung (2005) Advertisement Running Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Wei Nin (2019) Voice Recognition Wireless Home Automation & Sensor Monitoring System Based On Bluetooth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Wei Sheng (2018) Surface Textured Palm Kernel Activated Carbon Reinforced Polymeric Composite As A Potential Self-Lubricating Bearing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Wen Kan (2017) Design Of A Low Viscosity Batter Dispensing System To Improve The Productivity Of Kuih Rempeyek. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Yoon Soon (2016) FPGA-Based Hexapod Robot Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Yung Oon (2018) Thermal Insulation Material Made From Kenaf Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Zhi Zyong (2017) Very High Frequency (VHF) Interferometer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong , Atik (2011) Automated Clothes Drying System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong , Min Wen (2009) Analog Very Large Scaled Of Integration (VLSI) Testing And Analysis Of Combinational Circuits Using Computer-Aided Design (CAD) Tools. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chong , Shek Moi (2009) Voice Activated Door Control System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Choo, Hong Wei (2009) PIC Based Digital Voltmeter By Using VB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Hui Hui (2013) A Study Of Work Postures And Grip Force For Carpal Tunnel Syndrome (CTS) Among Workers In Aero Space Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Wai Sun (2010) Navigating UTeM In Virtual Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Hae Ling (2018) Design Of Car Cooling Device For Car Park In Hot Weather Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Hong Liang (2015) The Effectiveness Of The Control Indoor Environments In Miniature Model Of Poultry House (Assessment On General Ventilation System). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Jia Huang (2016) Investigation of the effect of build orientation on mechanical properties of fused deposition modeling part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chook, Xua Cing (2014) Successful Implementation Of Quotewin Software Tendering System : Case Studies In Multinational Companies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choon, Zhi Gang (2018) Development Of Monitoring System Using Internet Of Things (IoT) For Hydroponics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choon Hong, Ng (2007) Multipurpose Display Board. Project Report. UTeM, Melaka. (Submitted)

Choon Whey, Tan (2017) Design And Development Of A 5-DOF Robotic Arm And Movement Controlled By Android For Pick And Place Tasks. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choong, Kwan Hun (2005) Modeling And Simulation Of 3 Degree Of Freedom Of Robot Manipulator. Project Report. UTeM, Melaka Malaysia. (Submitted)

Choong, Bo Yee (2018) A Simulation Study Of Line Balancing Using Arena Simulation Software In Industry 4.0 Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choong, Kei Shing (2009) Design And Development Of Drive Simulator For Vehicle Dynamic Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choong , Lay Swan (2010) E-Recycle System Model : A Study On Plastic, Paper And Disc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choong Hui, Ling (2017) Mechanical And Physical Behavior Of Hevea Brasiliensis (Rubber Wood) Sandwich Structure Effect Of Cell Diameter Variation Of Hexagonal Core. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chou, Aw Lin (2020) Heat Transfer Enhancement Through The Use Of Vortex Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chow, Kok Lin (2013) Biometric Voice Recognition In Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chow, Jia Le (2016) Conceptual Design Of Mini Wind Turbine For Household Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chow, Zhi Chin (2018) Design And Analysis Of Gripper System For A Mobile Robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choy, Ying Yi (2009) Leaching Process Of Nata De Coco - Automation System Design And Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Christine, Sia Li Ling (2020) The Investigation Of Weld Defect Repair Using Friction Stir Addtive Manufacturing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Christopher, Calven (2019) Motion Control Of A Mobile Robot For Uneven Terrain. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Christopher, Christer Ruben (2017) Design And Development Of A Novel Water Distiller Using Fresnel Lens. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chu, Hun Wei (2015) Design Of Solar-Powered Garden Light With Motion Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chu, Soo Hui (2016) The Development Of Wireless Power Transfer Technologies For Multiple Devices Using Inductive Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chu, Yen Chun (2016) Development Of Portable Power Generator By Using Dynamo. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chu, Yen Chun (2016) Development Of Smart Domestic Electricity Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Denis Kiang Wui (2009) An Accuracy Study On The Positioning Of The Pick And Place Manipulator Trainer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Joe Shing (2010) E-Fict Information System Based On Web And SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Pei Yong (2013) Reconfigurable Dual Polarization Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Eng Seng (2017) Design And Development Of Ultra Low Power Embedded System For IoT Devices. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chua, Lian Kai (2018) Study The Absorption And Regeneration Of Desiccant Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chua, Shu Yuan (2017) Quantifying Solar Irradiance Variability Using Self-Organizing Map (SOM) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua , Ka Hui (2010) A Study On The Quality Of Micro Hole Machining Of Tungsten Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua , Yee Ling (2009) Design And Develop A Mobile Robot For Pick And Place Application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chuah, Peng Peng (2013) Labor Cost System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chuah, Xuan Hong (2018) A Study Of Visual Management System To Manage Warehouse Logistic Resources At LiKom. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chuan, Justin Chia Yang (2019) A New Design Of Self Charging Unmanned Aerial Vehicle (UAV) System Using Inductive Approach For Precision Argriculture. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chuan , Wen Sheng (2009) Applying Speech Recognition Technology In Learning Basic Mandarin Language. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chuay, Han Shen (2018) Microcontroller-Based Terminal Identifier For Single Phase AC Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chuink, Beng Cheong (2009) Fence Intruder Detection System (FIDS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chun, Wey Tong (2009) Biomedical Signal Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chun Woon, Chen (2016) Wireless Robotic Arm Control Using Myo-armband. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chung, Soon Thien (2011) Cough Noise Suppressor For Video Conferencing (An Image Processing Approach). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chung, Kar Yee (2017) Study of an aesthetic/emotional preferences on the product design characteristics. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chung, See Ern (2019) Investigation Of Curling Effect Of 3D-Printed ABS Structure On Different Print Bed Temperatures And Surfaces. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chwa, Shie Huan (2013) Zigbee-Based Smart Fall Detection And Notification System With Wearable Sensor E-Safe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cik Faridah, Samat (2009) Applying Voice Recognition Technology In Learning Basic Arabic Language. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Clara , Valdez (2007) Alarm Dialler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Colin, Lim Shi Wei (2011) The Implementation Of 3D Technology And Simulation In Interactive Help. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Connie, Bato (2010) The Influence Of Aging Time To Mechanical Properties On Aluminum Silicon. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

D., Sugumar and Chong, Kuan Eng (2005) Thermal Analysis Of An Inclined Micro Heat Pipe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D. Ravisankar, Devarajee (2012) System Identification Of Electronic Wedge Brake (EWB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Da'im, Nur Aina Khairiah (2018) Understanding MOOC Web Design Factor From The Perspective Of Technical Student. Project Report. UTeM, Melaka. (Submitted)

Dahlan , Jalil (2007) Hard Water Treatment System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dainil, Nur Fitrah (2019) Effect Of Carbon Nanotube On The Properties Of Graphite-Carbon Black-Polypropylene Composite For Bipolar Plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dalila, Nizam (2009) Membangunkan Sistem Larut Lesap Untuk Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Danial, Eystein (2018) Development Of Monitoring Temperature & Humidity Device For Hospital Resources Via IoT Based System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Danial , Azmi (2012) Real Time Infra-red Tomography For Pipeline Flow Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Danie Danial, Mohamed Salim (2012) Implementation Of Secure Confidential-document Transfer And Storage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Daniel, Jonathan Dave (2019) Design And Development Of Automated Front Lighting System With Sensor Integrated For Urban Car Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Darmawan , Taufik Hidayat (2016) Effect Of Cloud On Solar Photovoltaic Module Output. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Darus, Muhamad Firdaus (2019) Design An Antenna Of Orbital Angular Momentum For Wi-Fi Telecommunication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Darus, Sharulnizam (2019) Development Of Fruit Separation Device Using Color Sorting For Food Industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Darwis, Zulhalmi (2011) Design Of Water Level Control Training Kit. Project Report. UTeM, Melaka. (Submitted)

Dasuky, Fatin Noor Afifah Afif (2017) Analysis Of Doppler Effect In LTE By Using MATLAB. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Daud, Fatma Fadhilah (2016) Analysis Of Car Hydronic Cooling System With Possibility Of Using Solar Power. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Daud, Nur Alia Liana (2019) Quizu Board Development Of Educational Board That Test Student Knowledge On Signal Block Diagram. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

David, Yap Fook Weng and Wong , Yan Chiew and Chairulsyah, Wasli (2011) Performance Analysis Of Optical Communication In Free Space. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dayang Faridah , Abang Shebli (2005) Control Of DC Motor Using Proportional Integral (PI) Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dayang Haniza, Hamidon (2005) Video Advertisement For KUTKM : A Study On Persuasive Advertising. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dayang Kartikasari, Abang Abdullah (2009) Mechanical Properties Of Wood Plastic Composite Made Of Recycled Polypropylene And Recycled Wood Flour. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dayang Kartini, Haron (2015) Development for kid's learning edutainment (EDU-Play). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dayang Nor Fatin, Mahmud (2015) Comparative Tribological Investigation Of Bio-Lubricant Formulated From Waste Cooking Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

De, Chee Keong (2011) Smart Classroom Using LabVIEW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Derai, Gowdie Palmer (2017) Real Time Monitoring And Water Leakage Detection System In Underground Pipeline. Project Report. UTeM, Melaka. (Submitted)

Derrick, Patrick Charles (2018) Development Of Solar Power Assisted Flood Alert System With GSM. Project Report. UTeM, Melaka. (Submitted)

Devaki, Suppiah (2015) Prison Cell Lock Detection And Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Devakkumaran, Rajamohan (2011) Process Control Improvement Using Time Study In Muhlbauer Technologies Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Devan, Sanmugam (2015) Springback Deformation Measurement Of Composite Using 3D Scanner After Curing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Devienia, Louellis Rajit (2005) Simulation Of Sun Tracking Photovoltaic Module In Tropical Countries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dg Hafizah, Kassim (2012) Investigation On The Performance Of A Hybrid Microperforated Panel-Natural Waste Fibre As An Eco-Friendly Sound And Noise Barrier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dhanabalan, Suntaresan (2021) Indoor environment analysis for new laboratories block of FKM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dhaniah, Mohd Saleh (2011) Transmission Of Audio And Video Signal Using Square Wave Frequency Modulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dharham, Dharmawan (2017) Electronic Throttle Body Tuning Using Non-Linear PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dila Afnida, Azman (2010) Feasible Study On Characterization And Comparison Of Accelerated Life Tests And The Compatible Software For Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dinesh Kumar , Murugian (2007) Design A Solar Powered Water Pumping System For Typical Household Requirement. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Ding, Yen Yen (2016) Development Of Smart Library System Using RFID. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ding, Yen Yen (2016) Development Of Smart Library System Using RFID. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Divan, Tarmalinggam (2009) Speed Control Using Fuzzy Logic Technique (Application In Automotive). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dnash Kumar, Mohan (2012) Smartphone Controlled Mobile Security Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dolah, Muhammad Haziq (2018) Design Of Outer Rotor BLDC Motor For High Volume Low Speed Fan. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dollah, Siti Norshamimi (2019) Friction And Wear Properties Of Polymer Composite Matrix Made By Tapioca Starch. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dora , Jau (2006) Design And Implementation Of An Automated Work Piece Loader Indexer Table Station Using Sensor And Programmable Logic Controller (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dorah, Norasimah (2014) Activated carbon and graphene based electrochemical capacitor in aqueous electrolyte. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Doraisingam, Sankiran Dharma (2017) Fiber Optic Sensor Development On Liquid Cetirizine Detection For Pharmaceutical Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Doran, Wilfred Nini (2009) RFID Automated Gate System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Draman@Muda, Noor Azilah and Muda, Azah Kamilah and Choo, Yun Huoy and Ahmad, Sabrina and Shahrir, Mohammad Shazri (2017) Enhance Cepstrum-Based (MFCC) Extraction Technique With Wavelet Coefficient Method For Improving Identification Accuracy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dujong Inggom, Stephanie (2016) Inventory Management System For Multi Level Goods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dulah Aspa, Muhammad Luqman Nulhakim (2023) Surface modification of mild steel using alumina powder ceramic particles and TIG torch welding. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dzul Fitry, Ismail (2007) Investigation Of Microstrip Parallel Coupled Bandpass Filter For GPS Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulhisham, Aminuddin (2010) Reliability Study On Automotive Component Using Design Failure Mode And Effect Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulhusni, Othman (2011) Analytical Study On Control Of Buckling Lobe Onset For Hollow Circular Tube Under Axial Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulkafli, Siti Dzulaika (2016) To analyse the works body posture in PHN Industry Sdn Bhd using RULA assessment method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dzulkiffli, Najihah (2019) Study On Partial Discharge (PD) Behaviour For Different Type Of Insulation Defects Using Pulse Sequence Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dzulkifli, Izzah Nadhirah (2018) Investigation Of The Performance Of Circular Polarization Antenna At 2.45 Ghz Operating Frequency. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

E

E, Chao Cher (2011) A Robot Hand With Data Glove Inputs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E, Chao Cher (2011) A Robot Hand With Data Glove Inputs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eddie Sazly , Hussien (2009) UWB Low Noise Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eddy Barkley Fatani, Adam Daniel (2019) Experimental Study On Thermal Effect Using Sunshades In Vehicle Passenger Compartment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Edham Redza, Ahmad Foad (2006) Home Alarm System Using Metal Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Edriss Naqiyuddin, Md Khair (2015) Miniature Of Base Transceiver Station's Power Supply By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Edward, Syahirah (2019) Ultra-Wideband Bandpass Filter Using U-Slotted Substrate Integrated Waveguide (SIW) Cavities At 12 Ghz For X-Ku Band Radar Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ee, Wei Xiang (2019) Thermal Stress Analysis On Disc Brake Rotor By Using Finite Element Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ee , Leng Hong (2008) PIC PWM Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Effendi, Mohamad and Adi, Saptari and Rohana, Abdullah (2008) Productivity Improvement: A Case Study At A Communication Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Effendi , Mohamad and Adi , Saptari and Rohana , Abdullah (2012) The Implementation Of Risk Management In An Aerospace Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eh, Zheng Yi (2016) Design And Development Of A License Plate Recognition System Using Convolutional Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ehsan, Abu Bakar (2015) Effect Of Surfactant On EDM Of Low Conductivity Reaction-Bonded Silicon Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eiry, Eldry (2017) Driving Motion Simulator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Eivan, Kelvin (2018) Effect Of Slot Opening To Permanent Magnet Linear Generator Performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Elain, Elweelee (2017) Analysis Of The Factor Affecting The Consumption Of Energy And Energy Trends In Factory 2 FTK,Using Statistical Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Elda , Ahmad Jailani (2007) Automatic 'Switch On' System For Car Headlamps. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elfirah, Ab. Rahman (2009) Reverse Engineering Application In The Development Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eliakim, Che Yaakob (2013) To Design And Develop Islanding Detection Interface System For PV Connected Microgrid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eliyana, Ruslan (2013) Uplink Radio Access Point With Radio Over Fiber Technology For Picocell System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elizabeth Dimah, Anak Mula (2006) Perfomance Of Different Types Of Heat Exchanger Designs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elleen, Oh Lilien (2010) Learn Basic Mandarin Language By Mobile Game. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elma Aimmie , Norani (2005) Power System Analysis Of Grid Connected Embedded Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elmahi, Saad Ali Eltigani (2016) Fatigue Life Properties Of Alloy Steel At Different Stress Ratio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elmi Jasrie , Ehsan (2008) The Analysis Of 3 Phase Squirrel-Cage Induction Machine Using Simulink. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Elmi Shah, Mohd Khafe (2005) The Traffic Light Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elmy Mawarnie, Nawi (2009) Analysis Of IPV4 And IPV6 Performance In Small Office Home Office (SOHO) Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elvainey , Panus (2007) Remote Control Via Telephone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elvie Rosmieza, Mohd Zawawi (2006) Improve Manufacturing Process By Using Line Balancing To Reduce Cycle Time. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elyanie Nor , Salim (2005) Harmonic In Low Voltage Three Phase Four Wire In Electrical Distribution System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elyas, Talib (2009) The Mechanical Properties And Morphology Study Of The Silica-PE Composite Using Modified Silica. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elysa Sakinah , Md. Amin (2013) Development Of Image Filtering System For Car Sticker Detection. Project Report. UTeM, Melaka. (Submitted)

Em, Poh Ping (2009) Development Of A Simple CVT System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Emannuel, Chai (2019) Investigation Of Aerodynamic Forces On NACA Airfoils. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Emelia Ernie , Kamaruzzaman (2008) Merekabentuk Sistem Pengering Pakaian Automatik Menggunakan Kaedah Fuzzy Logic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Emilia Shander, Andrew Abe (2007) Control Heating Of Small Forging Using Oxy-Acetylene Flame. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Emira Idayu, Yahya (2018) Smart Security System For Motorcycle Using RFID With Apps. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Emmil , Razmie Leong (2008) A Three Phase PWM Controller With DC Power Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Enda Nur Malia , Ngah Deman (2009) Root Cause Analysis Of Core Pin Quality Problem Using Cause And Effect Diagram. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eng, Wei Sy (2013) Merging Of Writer Identification Technology Into Mobile Application For Forensic Document Handwriting Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eng , Sze Yee (2007) The Manufacturing Process Of Robo-Kidz-Toe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Engku Azizuddin, Engku Muhamad (2009) Small Scaled, Low-Powered Electric Car Drive Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Engku Nor Zatun Najhah, Ku Rasli (2005) Development Of Basic Calculator Using Microcontroller And Liquid Crystal Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Engku Zaidi, Engku Ibrahim (2009) Kajian Analisis Risiko Kualitatif Dan Kuantitatif Pada Penggunaan Stesen Pengisian Gas Asli (NGV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ensiriban, Matthew Tima (2023) Development of a drowsiness warning system with an alcohol detector using raspberry pi. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Erasoffinasari , Amirshariffuddin (2007) Solar Powered Plant Watering System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Eric, Jau Jeffrey (2012) Performance Of A Condenser With Cooper Oxide (II) Nanoparticles Suspended Into Host Refrigerant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Erna Nooryanti, Azmi (2006) Intelligent Fire Alarm System Using Bluetooth Mommunication. Project Report. UTeM, Melaka. (Submitted)

Erni Zahani, Buyong (2005) The Investigation Of MIG Welding Parameter Effects On Welding Of Dissimilar Metal (Stainless Steel To Cast Iron). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ernisha Syuhada, Faizul Azmi (2014) Design And Development Of Capacitive Power Transfer System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ernizura, Abu Shah (2009) Design And Implementation A Flexible Bed For Patient Facilities Prototype And Interfacing). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ernyza , Yusuff (2007) Accident Detector Through Cellular Phone (Transmitter). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ervie, Gireen (2006) Quality Management System In Higher Education - A Study On ISO 9001:2000 Implementation At KUTKM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eryana Eiyda, Hussin (2011) Farm Management System Using RFID. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eshah Budin Shah, Nur Syahirah (2018) Optimization Of Microstrip-Fed Slot For Short Range Device Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Esma Niza , Nawi (2007) Pembangunan Aloi Aluminium Terkimpal Dengan Retak Permukaan Sebagai Spesimen Ujian Tanpa Musnah (NDT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Esmadee, Shahrul Akmal (2023) Design for assembly analysis for newly developed 3D router machine. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Esmie Khalik Mohamad, Ismail (2008) Vibration - Free Positioning Of Flexible Systems Using Filtering Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Esmom, Ezlin Nur Aina (2017) Development Of Pigeon Hole Box System Using IoT For University Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Estar, Mohd Shahrizan (2008) Automated Electrical Distribution Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eu, Hue Ling (2015) Home Appliances Web Switch Control Wirelessly Using Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eugene, Lee (2005) Design And Implementation Of A Controller-Based Photovoltaic System For Outdoor Lighting Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eugene , Kuek Vee Chet (2012) Distance Measurement Device Using Programmable Interface Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Evelyn, Usun Kasing (2017) Design And Development Of Solar Powered Smart Dustbin For Domestic Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ezmikiel, Linggin (2005) DC Motor Position Control With PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ezuddin, Muhammad Harith (2015) Study of corrosion resistance and wear behavior of sol gel coating on AA7075. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

F

Fadhilah, Shikh Anuar (2012) A Study Of Copper Based Nanofluids Thermophysical Properties As Advanced Coolant In Automotive Radiator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhli Shahir , Zakaria (2012) Design And Implementation of Elevator Controller On A FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhlina , Abdullah (2008) A Design Of An Air Ionizer Using The Cockroft-Walton Multipliers. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Fadhlinasri , Yusop (2005) Sound Detector Walker Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhliza, Abdul Latip (2006) Heat And Mass Flow Predictions Through A Compact Heat Exchanger Unit (CHE) With Induced Flow Using CFD Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhlizil Fariz, Md Saad (2009) The Design And Development Of Warning Device For Low Pressure LPG Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadila, Mohd Atan (2010) Cooperative Spatial Multiplexing In Wireless Sensor Networks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadilah, Mohamad Najuri (2006) Mechanically Scanned Clock With LED Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadilah , Mohd Zain (2010) Design And Development An Underwater Glider Using Remote Control (RC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadli Rohaizi , Mohd Napiah (2009) Balancing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadli Yusof, Amirul Ridzuan (2019) Design And Fabricate Vehicle Trainer Kit For Educational Purpose (Body Structure) With Aide Of Computer Aided Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fadlilhisham, Ahmad (2008) Home Appliances System Development For CoHAVI Project. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadzil, Muhammad Faris (2012) Development Of A Mini Race Boat Powered By Solar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadzil , Che Man (2013) Development Of Automated-Guided Vehicle For 300kg Trolley Towing Application. Project Report. UTeM, Melaka. (Submitted)

Fadzli, Farid Akmal (2014) A Study On Sustainable Solid Waste Management In Malaysia's Smart City : Wilayah Iskandar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadzli, Nur Syahirah (2017) Development Of Portable Air Conditioning Using Thermoelectric Cooling Device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fadzli, Nurul Shahira Farhana (2017) Effect Of Acetone Vapor On Mechanical Properties Of Fused Deposition Modeling Printed Part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fadzlin , Md Fadzil (2007) Automatic Escalator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faezah, Hashim (2011) Intelligent Safety Helmet For Motorcyclist. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fahrulrazi, Hashim (2009) Solar Powered Electric Bicycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fahukmi Darul Adli, Mohd Noor (2006) Digital IC Tester Driven By PIC16F877A Implementing Exhaustive Test Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faiezul, Zainal (2007) Design Of Jig And Fixture For Milling Machine, Case Study - Cylindrical Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faihsal Hidayah , Suduri (2010) Rekabentuk Penyidai Pakaian Automatik Dan Boleh Laras Untuk Kegunaan Domestik (Retractable Automatic Cloth Hanger For Domestic Use). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fainul Hisham, Muhammad Fikri (2018) Plant Watering System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fairol Hishsyam , Mohd Nor (2008) Blocking Website Demostration And Explaination Model Control By Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairul Azhar, Abdul Shukor and Ahmad Zaki, Shukor and Muhammad Herman, Jamaluddin (2010) Design of Three Phase Multi Frequency Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairul Azhar , Nasri (2008) Automatic Cable Stripper. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Fairulazri, Mohammad Koshim (2008) Pole Lifter Mechanism (Mekanisma Pengangkat Galah). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairuz Fadzly , Nawawi (2006) Multiple Infrared Sensing Developments. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairuzah, Abu Samah (2007) Kajian Kelesuan Ke Atas Logam Dengan Menggunakan Beban Lenturan. Project Report. UTeM, Melaka. (Submitted)

Fairuzradzi , Md Yusop (2008) Membangunkan Dan Menganalisa Sistem Hidraulik Air Bertekanan Rendah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faisal Faris, Rahim (2012) Optimization Of Mixing Parameters To Produce PP - Enr Blend Via Response Surface Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faiz Adzhar, Abdul Halim (2015) Kajian Berkaitan Sumber Kawasan Pelepasan Inventori Bagi Taman Perumahan Di Kawasan Majlis Bandaraya Melaka Bersejarah (MBMB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faiz Hafizuddin , Mazlan (2011) Dual Band Circularly Polarized Microstrip Patch Antenna For GPS Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizal, Idris (2009) Controlled Conveyor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizal, Muhammad Najib (2019) Development Of A Driver Drowsiness Alert System Using OpenCV. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Faizal , Ahmad (2009) Vibration - Free Positioning Of Gantry Crane System Using Impulse Shaping Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizal , Hamzah (2008) Generation Of HV Impulse And Testing On Insulator. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Faizal , Zainol (2007) Gage Capability Study of Thin Film Coating Roughness Measurement Method Using Profilometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizatul Hanim, Rahmat (2013) Traffic Light Led Fault Monitoring And Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizil, Wasbari (2013) Enhancing Eco-Friendly Hydraulic Technology: The Development Of Low Pressure Water Hydraulic Manipulator For Small And Medium Industries In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizil, Wasbari (2013) Study Of Heat Exchanger Effects On Car Air - Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizul, Ahmad (2006) Study Of Wind Pressure Distribution Around Low-Rise Building By Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizul, Mohamad Faiz Akmal (2018) The Development Of Safety Device For Human Interfaced AC Motor-Based Food Processing Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Faizul Akmar, Abdul Kadir and Khisbullah, Hudha and Mohd. Zakaria, Mohd. Nasir and Ubaidillah, . (2007) Development of a Magnetically Activated Brake System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizul Azdi, Amat Puadi (2008) Laci Simpanan Barang Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fakhrul Faiz, Hamdan (2015) Development Of River Current Or Turbulence Energy Harvesting System : Comparative Study On The Energy Generating Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fakhrullah, Nur Syahirah (2017) Smart Home Security System Based On Internet Of Things. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fakrul Ridhuanuddin, Ghazali (2011) Real-Time SMS Alert System For Centralize Mail Compartment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fakrulradzi, Idris (2013) Deployment And Performance Analysis Of Wifi Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fakrulradzi, Idris and Noor Shahida, Mohd Kasim (2010) Performance Analysis on Data Transmission Over Wimax. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fara Adillah, Che Idris (2009) Design And Analysis Of Floating Pump Platform Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fara Maizura, Karia (2015) Automatic Power Source Inside Lecturer Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Asyikin, Zainal (2006) Graphical User Interface For 3COM 4200 Switch Configuration (GSC). Project Report. UTeM, Melaka. (Submitted)

Farah Elyanie, Dato' Hj Mohd Zolkafly (2006) The Effect Of Window Configuration And Position On Cross Ventilation In A Room; CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Nadirah, Alias (2008) Pengawal Letak Kereta Ultrasonik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Najwa , Mokhtar (2011) MAC Protocol For Wireless Cognitive Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Nazmi, Kamarudin (2008) Brush Teeth With Music For Treatment Of Autism Children. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Shahnaz, Feroz and Yosza, Dasril and Hanissah, Mohamad @ Sulaiman and Nor Azlina, Abdul Razak (2010) Sms Application Development in a Vision System and Statistical Applications in Vision-Based Quality Control Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Sharidah, Ab. Gafor (2013) Automatic Toilet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Umaima, Miswan (2008) Drilling Of Aero Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Zunurain, Ab Latif (2010) High Voltage And Impulse Test On Industrial Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahdatul Sahuda , Suhiri (2009) Effect Of Martempering Process On Plain Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahdiana , Mastor (2010) SMS Based Wireless Home Appliance Control System And Security. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Farahilda, Masekam (2009) Mapping Corrosion Activities Of Various Concentration Of Acidic Solution In A Pipe Using Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahiyah , Ghazali (2007) Device Switching Using Pc's Parallel Port. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahniza, Othman (2017) Design and development of planar antenna for short range communications. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Farakkasi, Nursyafikah (2016) Characterization Of 5g Antenna At 38 Ghz. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fareezan Salha, Mohamed Azahar (2006) Kawalan Peralatan Elektrik Berasaskan Mikropengawal Menggunakan Isyarat DTMF. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhan, Ahmad Fuad (2012) The Implementation Of Design For Reliability In Product Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhan Arif, Mohamad (2012) Application Radio Frequency In Keeping Track Shopping Trolley Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Abd Kadir (2011) Design And Analysis Of Mobile Robot For Road Side Curb Painting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Abd Razak (2008) Control Of 2 Dimensional Inverted Pendulum Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Masron (2012) The Mechanical Properties Of Polypropylene/Polylactic Acid (PP-PLA) Polymer Blends. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Md. Lazi (2012) Cost Saving Campaign. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhani, Mohamad (2008) Design And Fabrication Of Bollard Light Using Modern Product Development Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhani, Mohamad (2008) Design and fabrication of bollard light using modern product development process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Arafat, Azidin and Mai Mariam, Mohammad Aminuddin and Yusmarnita, Yusof and Zulkarnain , Zainudin (2007) Developing Power Inverter For Motor Drives System In Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Arafat, Azidin and Zulkarnain, Zainuddin and Yusmarnita, Yusof and Puteri Suriyani, Megat Wazir (2010) Develop Angular Speed Detection System Using Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Nasir, Abdul-Fattah (2016) Biodiesel Production Using Waste Cooking Oil Through The Microwave Irradiation And Conventional Method Using Cockle As Catalyst. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Waradi, Muhammad Fadli (2018) A Study On Gasoline Engine Abnormal Valve Clearance Using Accelerometer Analyzed By Vibration Signature Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Faridah, Omardin (2009) A Study Of Project Management Based On Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faridah , Jamil (2005) Remote Control Traffic Light System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Faris, Azman (2015) Parametric Study Of Biodiesel Properties To The Storage Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faris Adam , Mohd Ghazali (2013) Mobile Robot Motion Planning Based On Notion Of Artificial Potential Field (APF). Project Report. UTeM, Melaka. (Submitted)

Farizzamzam, Nasruddin (2009) Design And Analysis Of The Drivetrain System For Formula SAE Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farlister Glenn, Gainus (2013) Feasibilty Study In Implementing Of Microgrid By Using Fuel Cells. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fateh Sakinah, Abu Bakar (2015) Evaluation Of Energy Consumptions In Chicken Slaughtering Industry Using Cleaner Production Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatehah Hanim, Ahmad Othman (2013) Forecasting Plant Vigor Through Vegetation Index Mapping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatein Amina, Abd Malik (2008) Integrated Lens Antenna (ILA) For Automotive Application At Frequency 77GHZ. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faten Nadia, Mansor (2010) Tank Water Level Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fathin Afiqah , Ghazali (2010) Microstrip Fractal Array Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fathuddin, Mohd Zainuddin (2009) Factory Environment Monitoring Based On Wireless Sensor Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fathullah Farid , Zakaria (2011) Design And Develop An Eco Fly Killer In UTeM's Cafeteria. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimah, Morad (2015) Remote Monitoring Of Energy Meter Via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimah , Razak (2008) Wireless Camera Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimah Al Zahrah, Mohd Sa'at and Nor Azmmi, Masripan (2009) A Feasibility Study And The Design Of A Waste Heat Utilised Cloth Drier For Household Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimahtul Adnin, Sulaiman (2009) A Study On Graphite Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Nabilah, Rosly (2013) Design And Analysis Of Polypropylene Plastic Name Card Holder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Nabilah, Abd Halim (2015) Development Of Home Security Alert System Using GSM Modules. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Shaj, Ahmad Jamal (2014) Universal Time And Calendar System In Field Programmable Gate Array (FPGA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Syakira, Mohd Hassan (2015) Pneumatic Driven 180 Degree Rotation Pick And Place Mechanism With Conveyor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)