Improving Of Cool Air Evacuation Process For Home Application

Mohd Dzakiudin , Saripudin (2010) Improving Of Cool Air Evacuation Process For Home Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 pages) Improving_Of_Cool_Air_Evacuation_Process_For_Home_Application_-_24_pages.pdf - Submitted Version Download (526kB)
	PDF (Full Text) Improving_Of_Cool_Air_Evacuation_Process_For_Home_Application_-_Full_Text.pdf - Submitted Version Restricted to Registered users only Download (1MB)

Abstract

This report is concentrating on the natural cooling system for a cabin, which will not require much power consumption (electricity). This study is the study of advanced methods for planning a suitable and successful to absorb cold air out and how to maintain the house temperature at a suitable temperature. Process improvement was conducted by modifying the ducting system and fan installed on 4 hole with hole size 120mm diameter and 5820mm deep. Fans are use as medium absorption to attract cold wind out and cool cabin continuously. Fans used should have an ability to attract cool air from deep and small size is the advantages of the fan. The research was starting by monitor situation in the underground; water level and underground temperature are measured. Process monitoring is carried out until a certain lapse of time to get a stable reading and appropriate. After that, it was followed by finding the appropriate ducting system. With this system, wind that have been absorb always cool and able to cool the house within a short time. When all studies run smoothly, sensors will be installed. Sensor serves to detect the temperature inside the house, when temperatures are above the prescribed fan will work to lower the temperature inside the house.

Actions (login required)

View Item