Wireless Alert System For Machine

Aminatul Munauwarah, Yahaya (2012) Wireless Alert System For Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Wireless_Alert_System_For_Machine_-_24_Pages.pdf - Submitted Version Download (241kB)
	PDF (Full Text) Wireless_Alert_System_For_Machine_-_Full_Text.pdf - Submitted Version Restricted to Registered users only Download (841kB)

Abstract

Machine breakdown is a common phenomenon in a factory. This problem will affect the product quality and quantities for that day production. Machine condition monitoring is important to improve factory efficiency. Thus immediate action must be made in order to make sure factory will not facing any losses due to defect products. The same situation happens in Fujitsu factory that situated in Batu Pahat. From observation at Fujitsu factory, it is difficult to make sure twenty four hours machine monitoring could be done in person. Thus this project will provide the solution for Fujitsu problems where an alert system will be develop to detect which machine having a breakdown and immediately send the short message system (SMS) to the authorize person. Machines at Fujitsu factory will produce warning signal when error occur. The Transmitter of Radio Frequency (RF) remote control that located near the machine will sent the error to Receiver of Radio Frequency (RF) that located in control room and immediately SMS were send to authorize person by using GSM. At the same time, alarm will be trigger and LED light turns on to indicate which machines are having a breakdown. This Wireless Alert System For Machine project, can be shown that one alert system for Fujitsu machine are developed by using Radio Frequency (RF) remote control transmitter and receiver successfully achieved the main objective which is person in charge was able to get the message using SMS and it definitely can inform the person in charge if have the machine breakdown occurred. The person in charge also will know that machine at the part production breakdown by the alarm unit in the maintenance room. So, they also can trace which machine having breakdown based on the LED display. Other than that, the system also able to give warning to person in charge wirelessly via GSM modem.

Actions (login required)

View Item