Power Monitoring System

Muhammad Syafiq , Rahmat (2009) Power Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Power_Monitoring_System_-_Muhammad_Syafiq_b._Rahmat_-_TK1005.M79_2009_24_Pages.pdf - Submitted Version Download (206kB)
	PDF (Full Text) Power_Monitoring_System_-_Muhammad_Syafiq_b._Rahmat_-_TK1005.M79_2009.pdf - Submitted Version Restricted to Registered users only Download (15MB)

Abstract

The purpose or objective of this project is to develop a hardware system that accurately measure and tell us how much power or energy that an electronic device consumes. Usually, the amount of power or energy of electricity that have been used in a day or a week or a month does not accumulate. Therefore, to solve and overcome this problem a hardware system has been developed and it calls “Power Monitoring System”. This project has been separate into four main parts. The first is the component identification for the entire main and other component that will use in this project and then design and constructs all the circuits that use in this project. Then, the PIC was programming for the signal processes and data displaying. For the final part is to create the software interface for displaying the data in PC. Actually, this hardware system is look alike a digital multimeter but the different are the hardware system can display the value of power, voltage and current in AC and RMS value. It is also can display the value for the total in a day or a week or a month with the button function. This hardware system can also transfer the data by using the flash memory or flash drive. The data will display then in the PC in the LabVIEW software. The software is just the interface for displaying the data in analog signal in power and voltage value.

Actions (login required)

View Item