Optimization Parameter Of Surface Roughness For AISI 1018 Low Carbon Steel Using Boron Insert In Wet Turning Process

Lapatelo, Muhammad Hanif (2018) Optimization Parameter Of Surface Roughness For AISI 1018 Low Carbon Steel Using Boron Insert In Wet Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Text (24 Pages) Optimization Parameter Of Surface Roughness For AISI 1018 Low Carbon Steel Using Boron Insert In Wet Turning Process.pdf - Submitted Version Download (510kB)

Abstract

This research was carried out to determine the Optimization Parameter of Surface Roughness in Turning Process of AISI 1018 Low Carbon Steel using Boron Steel and analyse by using Taguchi method. The objectives of this project are to find the optimum parameter of turning process in producing good surface roughness. The selected spindle speed for turning process are 400, 450 and 500rpm. The feed rate parameters 0.04, 0.06 and 0.08mm/rev. Next the third parameters that will be considered in this project are the texture pattern on Boron Steel cutting tool which are eclipse, wavy and perpendicular. Machining process of turning will be performed on the CNC Turning machine. Also, the machining process of engraving the texture on Boron Steel cutting tool will be performed with using CNC Laser machine. The surface roughness will be test by using Surface Roughness Tester Mitutoyo SJ-410. The significant factor that impact the surface roughness is the spindle speed which is 47.17 % analysed by ANOVA.

Actions (login required)

View Item