Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Intan Zarina, Mohd Yusoff (2015) Optimization Of Aerodynamic On Side View Mirror. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salihin , Hj Abd Rahim (2007) The Study Of Eccentricity Of Circular Tube Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Jamli, Mohd Ali (2008) Analysis Of Sawmill Workers Through Integration Of Video Observation And RULA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Afiq, Nik Mohd Arif (2011) Analytical Study On Control Of Buckling Lobe Onset For Hollow Rectangular Tube Under Axial Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yuvarajan , Karathihayan (2013) Modelling of palm fibre polypropylene composite for randomly distributed fibre reinforcement. Project Report. UTeM, Melaka. (Submitted)

Za'im Junaydi, Yusof (2015) Sound Absorption Performance Of A Acrylic-Based Micro Perforated Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

'

'Aishah, Hassan (2013) Fabrication Of Activated Carbon Filled Epoxidized Natural Rubber Composite Via Solvent Casting Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

A P Rajan, Sivanesshvar (2023) Human head measurement study using kinect camera with three dimension cad software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

A. Ravindran., Arjun (2018) Circular Composite Tubes Under Quasi-Static Axial Loading. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab Ghani, Nur Atiqah (2020) Parameter optimization of kenaf fiber for heat insulator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab Rahman, Mohd Khairul (2017) Development Of Grip Strength Monitoring System For Stroke Patient. Project Report. UTeM, Melaka. (Submitted)

Ab Razak, Mohd Hafrez Razi (2014) Electrophoretic deposition and annealing of poly (vinylidene fluoride)-graphite laminated composite film. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab. Majid, Aliah (2020) Preparation And Characterization Of Modified Polyaniline- Graphene Nanoplatelets (PANI I GNPs) Nanocomposites Via Acid Protonation Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab.Rahman, Ahmad Wahi (2018) Effect Of Node Enhancement On Strength Of Body-Centered-Cubic (BCC) Polymer Lattice-Structure Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abang Abdul Razak, Dayang Ma’asitah (2022) Mechanical properties and failure analysis of Bemban fibre reinforced thermoplastic matrix composite. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abang Ahmad, Abg Muhd Fakhrullah (2022) Effects of kenaf fibre surface treatment to the mechanical properties of recycled polypropylene composites. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abd Aziz, Kadir (2006) Structural Design And Analysis Of Sewerage Inspection Crawler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aziz, Muhammad Alif (2015) Electroless quaternary Ni-Co-Cu-P deposition on Fe substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Muhammad Fahmi (2018) Mechanical Properties Of Coconut Fibre Reinforced Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Norfarhana (2016) Effects Of MWCNTS Surface Modification On The Thermal And Mechanical Properties Of Epoxy Filled MWCNTS Nanocomposites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Halim, Mohamad Kamarul Nizam (2015) Modelling of thin wall machining with tabular helix end mill. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Jakfar, Nur Syiefa (2017) Study On Sandwich Structure Using Banana Pseudo-Stem Frp As Skin Material For Environment Sustainability. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Jalil, Muhammad Aiman (2019) Performance Analysis Of Microwave Imaging System For Different Microwave Sensors. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Latif, Muhammad Fadzilan (2017) The development of portable in-situ open circuit potential test cell. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Latif, Muhammad Haziq (2024) Defect detection on welding part by using magnetic particle inspection (MPI). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Manaf, Rumaisa (2016) Case Study Effect Of Temperature On The Nanoparticle Stability Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Manap, Nurulfajar and Sulaiman, Riza and Darsono, Abd Majid and Mat Ibrahim, Masrullizam and Hairol , Izzuddin (2017) Enhanced Image View Synthesis Using Disparity Depth Extraction For Efficient Performance In Stereo Vision Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Mudtalib, Nur Elina Shahrina Amza (2017) Synthesis of graphene nanoplatelets using chemical vapour deposition and waste cooking oil as carbon feedstock. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahim, Mohammad Na’aim (2022) Optimum parameters of graphene reinforced magnesium alloy and its influence on the mechanical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Rahim (2009) Design Optimization Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Nur Awaliah (2015) Assessing a system reliability: a case study in arm rear axle assembly. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rashid, Nur Umiza (2016) Nano Hybrid of MWCNTs/GNPs filled epoxy nanocomposites for structural application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Razak, Mohamad Izreen (2017) Application of converted mode for defect defection in plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Razak, Nor Akhmal Ariff (2021) On the wideband dynamic vibration absorber using magnetic piece-wise mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Salam, Adam (2009) Mereka Bentuk Platfom Keselamatan Untuk Kerja-Kerja Membuka Dan Menutup Kanvas Lori. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Wahab, Muhammad Hishamuddin (2014) Electrical Discharge Machining (EDM) of Reaction Bonded Silicon Carbide (RB-SiC). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Wahab, Nur Umairah Hafifah (2022) Effect of glazed roof tile waste weight fraction on the mechanical properties of eco-friendly concrete. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Afri, Mohd Nor Zamani (2016) Application Of Fiber Optic Sensor For Sodium Hypochlorite Concentration Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Alif, Abdul Aziz (2011) A Feasibility Study Of 3D Printer Parameters Optimization By Using Bamboo Powders. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Asmin, Muhammad Aslam (2024) Effect of electrodeposition current density and sodium dodecyl sulphate surfactant (SDS) on the properties of nickel-recycled quarry dust composite coatings. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Azri Shah (2018) Study On Extreme Pressure (EP) Properties Of SN0W20 Grade Engine Oil With Different Type Of Nanoparticles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Khairul Fahmi (2014) Analysis of applying ultrasonic system on FDM nozzle using ANSYS. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Muhammad Anwar (2021) Evaluation of ergonomics workstation in UTeM Laman Hikmah Library. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Farah Azwani (2018) Material Selection For Natural Fibre Composite Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Ghafar, Ahmad Mubasyir (2019) Analysis Of Waist-Enlarged Tapers Towards The Performance Of The Single Mode-Multimode Single Mode (SMS) Fiber Optic Sensor For Liquid Temperature Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hadi, Nur Aisyah (2016) Redesign Material Handling System By Using Ergonomic Approach To Reduce Back Pain Risk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Anisyahida (2016) Development A New Gear Oil Sensor Using Fiber Optic Sensor For Engine Functional Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Harith Hilman (2019) Thermal and mechanical properties of thermoplastic cassava starch/beeswax reinforced with cogon grass fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Latef, Muhammad Syazwan (2017) Design Of Water Filter System Containing Rice Husk And Kapok Fiber For River Trash Collector System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Mu'in, Haz'zaid (2012) Modelling And Study Of Femur Bone Under Normal loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Mu'iz, Abdul Hamid (2015) Anthropometric Characteristics Of Technology Campus Students And Their Relationship With Existing Bus Stop Bench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Mua’in, Mohammad Haziq Hilmi (2024) Comparative study of performance difference geometries carbide tool in turning titanium alloy TI-6AL-4V ELI. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abdul Munir, Muhammad Syafiq (2017) Thermal stress analysis on disc brake rotor for NGV vehicle by using finite element analysis (ANSYS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Nasir, Muhammad Asif Asyraf (2020) Development of a machine to assist wheelchair users to board a bus. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Jaafar (2015) Study Of Selected Properties Of Low Density Alloy After The Heat Treatment Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Ahmad (2013) Design And Analyse The Configuration Of Earthing System Based On High-Low And Low-High Soil Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Amirul Hazim (2019) Mechanical and thermal properties of thermoplastic cassava starch/beeswax reinforced with sugarcane bagasse fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahman, Muhammad Nursyafiq (2014) Carbon nanofibers assisted conventional EDM on stainless steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahman, Nor Nabilah Syazana (2016) Automatic Computer Vision System For Industrial Product Quality Inspection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Siti Suhailah (2020) A deep learning algorithm to diagnose breast cancer among female. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahman , Mohd Nasir (2015) Shape optimization of generic side view mirror. Project Report. UTeM. (Submitted)

Abdul Rashid, Muhammad Faiz Haiqal (2016) Optimization study on process condition of durian shell pulping towards hydrophobicity. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Amerul (2021) The evaluation size of kenaf fibre reinforced with PLA composites subjected to tensile and thermal properties by using ANSYS software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razak, Nur Amiera Ashraf (2017) Analysis Performance Of Fiber Optic Sensors In Fully Synthetic Engine Oil Monitoring System With Different Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Nurul Ameera (2017) Development Of Fiber Optic Sensor For Semi-Synthetic Engine Oil Performances With Different Concentrations. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razak , Bahtrem (2007) Proses Fabrikasi Dan Pencirian Bahan Komposit Laminat Untuk Industri Kapal Terbang. Project Report. UTeM, Melaka. (Submitted)

Abdul Razi, Muhammad Haidhir Firdaus (2017) A Development Of Motorcycle Engine Oil Performance Monitoring System Using Fiber Optic Cable. Project Report. UTeM, Melaka. (Submitted)

Abdul Razim, Rozieani (2019) Investigating The Effect Of Upper Arm Postures On The Hand Grip Strength Requirement For Female Malaysian Young Adult. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rob, Muhammad Faiz (2016) A Study On Machining Strategies For Thin-Walled Five-Axis Pocketing Profile : Aero-Structural Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Talib, Azreen Shafira (2022) Design and evaluation of test rig for measuring hip flexor strength in standing position. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abdul Wahab, Muhamad Syafiq (2017) The model of deforming mode tube under axial loading. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Wahid, Muhammad Ja’far As-Shadiq (2022) Vibration analysis of electric shaver mechanical system using statistical analysis method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Wahid, Nur Sabrina (2024) Mechanical properties of jute fiber polyester hybrid composite filled with sugarcane bagasse. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdull Rahman, Nurull Syahirah (2024) The effect of nanocopper oxide incorporation on the properties of ABS membrane. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Fatin Nadia (2017) Experimental Investigation On Mechanical Properties Effect For Different Orientation Of Kenaf Fiber Composite Through Tensile And Impact Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Hafiz (2016) Study Of Fluid Flow In Junction Of Car Washer Tube Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Sharifuddin (2017) The Effect Of Thermal Processing On The Properties Of Reclaimed Carbon Fibre. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nur Fatin Hanani (2019) Investigation on the effects of electrospinning distance and applied voltage on morphology of poly (Lactic Acid) electrospun nanofibres. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nur Suhaida (2016) Experimental Investigation On Coconut Fibre Composition Profiling With Respect To The Modulus Of Rigidity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Siti Amirah (2020) Effect of various temperature on graphene based conductive ink. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abidin, Roziah (2008) Investigation Of Inter Material Shear Properties Of Iron And Stannum. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Affifuddin (2019) Image Compression Using Discrete Cosine Transform (DCT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Muhamad Hairee Izwan (2018) Analysis and validation of workstation design for mechanical assembly department in aero-composite industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Noor Farah Iddayu (2016) Formation of iron oxide nanostructure by thermal oxidation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Norinni (2019) Investigation of the buckling behaviour of axially compressed cone with dimple imperfection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Norisfarina (2018) Study On Waste Glass Milling For Feldspar Replacement In Ceramic Tile. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abul Jalil, Mujahidah (2016) Round nose bullet design using high-profile curve definition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adam, Nur Wardah (2018) Thermal, Physical And Environmental Friendly Characteristics Of Bio Based Composites Derived From Sugarcane Fibre And Potato Starch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adeline Chua, Jia Min (2014) Image restoration using mean, median and adaptive filter. Project Report. UTeM. (Submitted)

Adenan, Muhammad Muizzudin (2016) Numerical Simulation Of Incompressible Flow Of Different Types Of Fluid In A T-Junction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi , Saptari and Seri Rahayu , Kamat and Wan Hasrulnizzam , Wan Mahmood and Isa, Halim (2005) Analysis Of Workstation Design In Assembly Line For Small Scale Electric Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adiyana, Sukor (2011) An Investigation Of Human Factor Engineering And Human Behavior On Productivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adli Zil Ikram , Abdullah (2013) Analysis the i beam subjected to three point loading or bending for different material. Project Report. UTeM, Melaka. (Submitted)

Adnan, Norsyafiqah (2019) Investigation On Single Fibre Strength From Reclaimed Carbon Fibre (rCF) For Secondary Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adnan, Nur Afiqah (2022) Influence of nano-reinforced particles on the mechanical properties of aluminium metal matrix composite fabricated by cooling slope casting. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Afandi, Muhammad Akif Irfan (2019) Experimentation of mode shape curvature algorithm using accelerometer for damage detection in aluminium 6061. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Afandi, Nurul Fahimah (2023) Structural integrity assessment of cable structure : From laboratory to industry. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Afda Rizan, Ismail (2005) Manual Wheelchair Design Improvements And Developments. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afifah Maheran, Abdul Hamid (2006) Alat Kawalan Jauh Infra-Merah Pelbagai Peralatan Dan Litar Penerima. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahamad Pauzi, Ahmad Zulhilmi (2024) The effect of surface treatment on the void calculation of thermoset composite by using image analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Aina Syuhada’ (2019) Characterization Of Feedstock Powder With Different Morphology For Plasma Sprayed Titania Coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Azharudin (2017) Optimization Of RTCS Main Frame By Using Numerical Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Madiha Husna (2017) Optimization Of Friction Stir Welding Parameter On Aluminium 5052 Alloy By Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohd Aireen (2016) Evaluation On Difference Working Posture Using RULA Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhamad Khaizaki (2015) Reaction mechanism of electroless quaternary nickel alloy deposition on fe substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Bakri (2020) The enhancement of composite phase change material towards thermo-physical properties using nanoparticle for thermal energy storage. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Fauzani (2023) Human hand measurement study using three- dimensional camera (3D) anthropometry system with 3D CAD application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Ismail (2015) Defect Detection On The Metal Surface By Using Machine Vision Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Nur Farah Farizah (2023) Improvement on current wheelbarrow (Wheelbarow-OnThe-Go). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad, Nurulnabilah (2017) Preparation and characterization of hematite iron oxide/CNT for photocatalyst. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Siti Fikriah (2019) The study of flank wear using coated latuma (AlTiN) boron steel (22MnB5) on aluminium (AA6061). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Adnan, Muhammad Syukri (2023) Radiator count monitoring system for logistic management system using YOLOv8. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Apandi, Azmirul Hyzain (2022) Conceptual design of smart passive exoskeleton for monitoring localized pressure and postural angle during sitting/standing tasks. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Arif Fahmi, Turin (2015) Comparative Evaluation Of Existing Product For Eco-Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Asyraf, Shari (2008) Non-Intrusive Liquid Level Detection System Using Ultrasound Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azan, Amirah Diyana (2017) Effect of layer thickness and fill angle on flexural properties of carbon fibre reinforced ABS printed part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Daud, Fatin Farhana (2023) Mechanical and physical properties of glass waste mixture in concrete. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Deli, Mohd Noor (2009) Menganalisa Keadaan Bukan Linear Analisis Unsur Terhingga Terhadap Rasuk Daripada Struktur Badan Bas Apabila Dikenakan Daya Lentur. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fadhil, Dzulkafli (2011) Performance Evaluation Of Coordinate Measuring Machines. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fadzi, Ahmad Ridhwan (2017) Corrosion behaviour of mild steel coated with epoxy-graphene film in 3.5 wt.% NaCI solution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Faiz, Kamarul Zaman (2009) Design Improvement Of Existing Executives Chair In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal, Azmil (2008) Finite Element Modeling, Analysis And Simulation Of Wide Rim Alloy Wheels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fakhruddin , Yusoff (2007) Pembangunan Perisian Untuk Pengimbas Kod Bar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Falah , Zainol Azzudin (2007) Generate High Frequency Mechanical Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fazil, Muhammad Aimin (2018) Design And Development Of Hitting System For Head Concussion Test Rig. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Mohd Azmi (2010) System Development Of An Initiation Sequence Using Face Recognition Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fitri, Ab Halim (2008) Analysis And Flexural Strength Of Mullite-Bonded Silicon Carbide Fabricated Using Various Uniaxial Mechanical Pressure And Milling Duration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fuzi, Hawa (2019) Investigation On Mechanical Properties Of Reclaimed Nonwoven Carbon Fiber Composite For Secondary Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Ghazali , Zulcefli Muhammad (2009) The Investigation Of Effect Of The Capillaryty On The Penetrant Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Iqbal, Ahmad Syafiq (2018) The Study Of Thermoplastic Corn-Starch Composite Reinforced By Short Alkaline Treated Pineapple Leaf Fibre On Mechanical,Physical And Environmental Propertie. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Jamal, Salim and Soo, Yew Guan and Radi Husin, Ramlee (2013) Physiological Using FGPA In Health Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Kamarul Helmy, Ahmad Syamil (2024) Evaluation of piper sarmentosum leaves extract as an Eco-Friendly corrosion inhibitor for carbon steel in 5M HCl, lake water and 3.5 wt.% NaCl medium. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Khairi, Muhammad Irsyad (2019) Ergonomics evaluation of design studio at FKM UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Mawardi, Adilla Fasha (2017) Effect of applied load and the sliding speed on the subsurface deformation of wear on hybrid metal matrix composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Nahran, Luqman El Hakim (2017) Experimental Investigation On Energy Absorption Capacity Of Mild Steel Cone Subjected To Axial Crushing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nazri, Ahmad Hanis Haikal (2024) Impact of sit-stand exoskeleton on work productivity in metal inert gas welding task. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Nizam, Afiq Syazwi (2016) Optimization of process condition on loading degree of magnetic composite sheet by lumen loading technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Noor, Kamarul Shahrin (2024) Effect of wire cut waste in particulate form on mechanical properties of laminated glass composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Nor Hisham, Nurul Asyikin (2016) Synthesis of TiO2 nanostructure by anodic oxidation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Rosali, Muhammad Faizal (2019) Development Of IoT Street Lamp Monitoring System For Lamp Production Factories. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sabri, Zahari (2015) Effect Of Surface Roughness On Hydrogen Gas Production Rate In Alkaline Electrolyser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Shahril, Razali (2011) Effect Of Size Of Bolt On The Relative Critical Slippage Of Bolt-Nut Joint Under Transverse Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Shukri, Norsuzila Azura (2024) Effect of thermal degradation on the mechanical behaviour of green biocomposites packaging material. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Sidi, Afuan Syamer (2024) Design and analysis of ergonomic and green floor chair. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Syafiq, Baharin (2009) Experimental Modal Analysis On Flexible Plate Structure Using Forced Vibration Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syazili, Md Din (2015) Investigation On The Effect Of Machining Strategies On The Surface Finish And Dimensional Accuracy Of Five-Axis Flank Machining Of Curvy Angled Shapes (CONVEX). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusoff, Ahmad Ramadhan (2017) Application of knowledge based engineering in designing automobile rim and macros in CATIA. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Yusri, Yaacob (2006) Implementation Of Image Enhancement Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zainuddin, Ahmad Syahmi (2018) Fabrication And Characterization Of Carbonized Electrospun Nanofibres From Polyacrylonitrile And Polyvinyl Alcohol Precursors. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Zulhelmi, Ab Hamid (2010) Cooperative Space-Time Block Coding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmed Fauzi, Mohamed Fiqri (2018) Comparison Of Laminar And Turbulent Model Of Water Flow In Microchannel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aidil Azlan, Ahmad Zamri (2008) Laminar Natural Convection In Enclosure Containing Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ain Fathihah, Mohamed Yusoff (2015) The Effect Of Fibre Size, Fibre/Matrix Interphase Adhesion And Fibre Loading On Mechanical Properties Of Bio Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aini , Ahmad (2009) Seedling Diameter Measurement With Application Of Infrared. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Aishah , Mazelan (2010) Effect Of Re-solution Heat Treatment Temperature On The Impact Toughness Of An Aluminum Alloy For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishatul Rodhiah, Mohamad (2009) The Study Of Rings Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizat, Mohamed Ali (2008) Measurement And Evaluation Of The Reverberation Time For Classrooms In UTEM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ajang, Dalgush Dipak (2022) Hygrothermal ageing of recycled polypropylene and rubberwood waste composite for construction material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alami, Muhamad Fakhrur Razi (2024) Microstructural and mechanical properties characterization of wire arc additive manufacturing with GMAW for 308 stainless steel. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Aldarji, Adeb Ahmed Saeed (2017) A study on the effect of varying fiber contents to the physical and moisture absorption characteristics of hybrid oil palm empty fruit bunch/Kenaf reinforced high density polyethylene composites for automotive application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alex, Madi Chung (2019) Wideband nonlinear dynamic vibration absorber using combined softening and hardening stiffness mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ali, Khalis Alwi (2018) Effect Of Different Concentration Of Carbon Nanotube (CNT) In SAC305 Solder Alloy On The Hardness, Wettabilitty And Resistivity Under Thermal Aging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Nur Azarena (2014) Analysis for cast aluminium alloy titanium carbide. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ali Saeedan, Ahmed Saeed (2015) A study of pre-travel variation of coordinate measuring machine with different stylus configurations. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Amirah Maisarah (2022) Mechanical properties and surface quality of natural rubber-poly (Lactic Acid) composites for fused deposition modelling technology. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Alias, Nor Hasrin Nadia (2017) A statistical model for determining friction and wear of SK11 ball bearing in nanoparticles-enhanced engine oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alis, Izzati Fatin (2018) Experimental Study On Mechanical Behavior In 3D Printed Part Using Fused Deposition Modelling (FDM) Method : The Oil Palm Fiber Reinforced Thermoplastic Filament As Raw Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alyaa Izzati, Hashim (2010) Study And Preliminary Design Of High Speed Impact Test Machine Using Hopkinson Bar Test Principle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alzahari, Muhammad Farid Elyman (2019) The effect of surface treatment on PALF reinforced vinyl ester composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aman, Mohd Asyraf (2018) Investigation On The Characteristic Of Thermoplastic Cornstarch (TPCS) Composites Reinforced Short Pineapple Leaf Fiber (PALF) By Using Different Method Of Preparation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amat Rowaji, Nur Amalinna (2018) A Study Of Automatizing Vision Base (Camera) Object Dimension Measurement By Using MATLAB. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ambran, Muhammad Abid Muttaqin (2020) Evaluation of slit parameter of ferromagnetic material based on magnetic flux leakage. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ameruddin, Haizatul Norisha (2022) Preparation and characterization of natural rubber latex filled with stannic oxide nanocomposites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ameyrullah, Arshad (2007) Merekabentuk Dan UjIkaji Penunjuk Paras Kandungan LPG Di Dalam Selinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminallah, Muhammad Mufqi (2019) Study of fiber loading effect on thermal and rheological properties of bio composite fused filament fabrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aminoddin, Khairul Anuar (2022) Modelling of different tapered structure of multimode interference (MMI) couplers. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amir, Mohd Anas (2018) Vibration Analysis For Misalignment On Spur And Helical Gear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir , Fahruroji (2006) A Study Of Square Ring Under Lateral Compression Using Experimental And Finite Element Methods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Farhan, Maarof (2011) Development Of Car Door Lock Actuator Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Fizal, Amir Razauddin (2015) Analysis On Effect Of Coconut Fibre Towards Impact Characteristics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hamzah, Muhamad Nasruddin (2018) Fabrication Of Uniaxially Aligned Electrospun Nanofibre Using A Rotating Collector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Zaid, Baharudin (2009) Penyerapan Tenaga Oleh Keluli Lembut Di Bawah Hentaman Kuasi-Statik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Ramzani, Radzid (2015) Removing Al-Quran Illumination. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ammer Ezhar, Mohd Razalli (2015) Fatigue Analysis Of Steering Knuckle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Abdul Hanan (2018) Design And Fabrication Of Flippable Car Hazard Triangle Using Car Floor Mat As Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Fatin Afiera (2017) Handwriting analysis using IMU for small handwriting size. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amran, Mohd Firdaus (2018) Effect of electron beam radiation on the dispersion of graphene nanoplatelets in nylon66 based polymer composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amzar Hijazi, Shubli (2011) Analysis Of Mechanical Properties Of Inorganic Adhesive Based Composite Using Finite Element Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anas Mujahid, Mohammad Khair (2013) Mechanical Behaviour & Water Absorption Of Metal Matrix Composite (TN+Rice Husk) Fabricated Via Permanent Mould Casting - ( Experiment with 10% And 25% Of Rice Husk). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Andrew , Arih (2007) Stress And Deformation Analysis On PCB Depaneling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Andy, Low Foo Hwa (2015) Face Recognition Using Principal Component Analysis With Support Vector Machine Classifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anen, Marvrick (2022) Workability and compressive strength of concrete reinforced by plastic waste concrete aggregates. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ang, Soon Chang (2013) Design And Development Of Tactile Detection By Using RFID Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Chan Yong (2021) Verification of CFD method for vehicle flow simulation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ang, Kuan Kee (2015) Vehicle Detection And Counting From Unmanned Aerial Vehicle (UAV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Siew Khim (2018) Effect Of Stitching On Kenaf Woven Fabric Embedded Thermoplastic Binder System In Intraply Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ang, Wai Chun (2018) Development Of Ticketless Parking System Using License Plate Recognition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ang Wei, Yih (2012) Data Acquisition System For Solar Panel Monitoring. Project Report. UTeM, Melaka Malaysia. (Submitted)

Aninorbaniyah, Bairan (2013) The effects of carbon nanotube on the properties of graphite-carbon black-polypropylene composite for bipolar plate. Project Report. UTeM. (Submitted)

Anis Nabila, Mohd Ismail (2015) Synthesis And Optical Characterization Of Mercury Diselenide (HgSe2) Thin Films. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anis Niza, Ramani (2013) Design and Analysis Electrical Energy form Clay Soil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anna Marie , Almodiel (2008) Study On Fracture In Low Carbon Steel Using Bend Specimen With And Without Carburizing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Nasri (2017) Foreign material detection in agarwood using thermal imaging technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Nur Azalina (2024) Investigation on the effect of tool geometry features to minimize damages during trimming of Hybrid Fibre Reinforced Polymer (HFRP) material -aerostructural component. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Nurul Husnina (2017) The effect of high frequency wave in vibro acoustic method for crack detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuarulnam, Ramli (2013) Counterfeit Banknote Detection & Counting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar Naimi, Arsat (2015) Study On The Properties Of Parts Manufactured Using Fused Deposition Modeling (FDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arham Syafiq , Azmi (2013) Mechanical properties of polyperties of polypropylene filled wood fiber composites. Project Report. UTeM. (Submitted)

Arief Ezmee , Jumodi (2008) Infrared Detector. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Arieff Ridzwan, Yussuff (2011) Synthetic Hybrid Laminate Composite Using Recycled Plastic Bag For Hardboard Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariff, Nor Azimah (2018) The Study Of Surface Roughness For AISI 1018 Using Boron Steel Cutting Tool Texture In Wet Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariffin @ Mohd Saufi, Mohamad Assif (2016) Optimization Performance Of Fiber Optic Sensor On Fully Synthetic Test Oil For Engine Traditionally Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arika, Aris (2005) Development Of Electronic Machanical Design System (E-MechSys) For Consultancy Services : Plumbing And Sanitary Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arom Karoman, Muhammad Fadzil (2019) Cutting force measurement of natural fiber reinforced polymer matrix composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arumugam, Solament (2019) Investigation of voltage of strained rubber sheet using strain gauge-voltage measurement system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aseri, Nur Amanina Syazwani (2018) A Study On The Effect Of Physical, Mechanical And, Morphological Properties Of Pineapple Leaf Fiber Reinforce Cornstarch Biodegradable Plastic Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asfaezuddin , Zakaria (2009) Analisa Perpindahan Data Model Surface Di Antara Platfom CAD Yang Berbeza. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Askari, Rahmah (2018) The Influence Of Sol Volume And Heating Temperature On Ti02 Sol-Gel Coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Asmadi, Mohamad Nur Ikhmal (2023) Comparative study on the effectiveness of cementitious and elastomeric waterproofing materials to comply with ASTM D5957. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Asri, Mohd Aidil Iman (2023) Development of biodegradable mat from cassava starch and coconut fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Asri Khalid, Mohd Subari (2014) 3D Reconstruction Image Using Single Low Resolution Web Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asyul Sultan Saidi, Zulhelmi (2018) Effect Of Cogon Grass Fibre On The Thermal, Physical And Environmental Characteristic Of Thermoplastic Cassava Starch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Muhammad Faiz (2018) Vibration Statistical Analysis (VSA) Of Gasoline Engine's Abnormal Valve Crack By Accelerometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Nik Nur Amiera (2019) Preparation And Characterization Of Nanocellulose Derived From Waste Office Paper Prepared By Acid Hydrolysis Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Awang Khalid, Dayang Nurhafiza (2024) Pump monitoring using multi-sensor and analysis by statistical technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Awang Ngah, Nurasyilah (2024) Effect of different pressure forces on the dense porous layer of ceramics. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ayob, Muhammad Amirul Shafiq (2016) Experimental Investigation Of Front Sprocket Failure Of Fixed Bicycle Using Acoustic Emission And Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayu Natasya , Kasim (2013) Effects of bf length on the properties of bamboo/polypropylene composite. Project Report. UTeM. (Submitted)

Ayub, Imran Alif (2024) Direct current motor controller using alcohol sensor with IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azaimmy , Maksid (2009) Kajian Kegagalan Statik Dan Lengkokan Ke Atas Menara Penghantaran Elektrik Dan Kaedah Analisis Unsur Terhingga Menggunakan Perisian Berkomputer MSC/NASTRAN-PATRAN. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azaman@Azman, Muhammad Aqil Rafiq (2024) Mechanical properties of glass fiber polyester hybrid composite filled with wood dust. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azane Azran, Mohd Latif (2006) A Study On The Annealing Process Of Aluminium Bronze Alloy Based On Their Microstructure Growth And Mechanical Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azfar Nazmi , Nikmatlah (2010) Validation Of Bar Vibration By Using FEA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhanuddin, Danial Hafizuddin (2018) Analysis Of Assessment On The Muscle Fatigue Associated Towards Male And Female Drivers. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Azhar, Anuar (2015) Penyiasatan Perambatan Gelombang Akustik Terhadap Lapisan Konkrit Struktur Bertetulang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Muhammad Aidil Haqiem (2024) Experimental analysis on mechanical properties of glass fiber coconut leaf reinforced with polyester fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhar, Siti Hajar (2022) Study on wear performance of heat treated thixoformed aluminium alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azianashima Heedayu, Zainal (2009) New Design Using Fiber Glass Composite (FRPC) For Jimny Back Door. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azis, Nurul Atikah (2015) Study Of Coating Properties For Aircraft Aluminum Alloy Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Asyran Noor Rusyaidi (2021) Development of counterbalance arm sling exercise for neurological patient with hemiparesis of Malaysian population. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aziz, Azrull (2016) Monitoring And Determination Of The Appropriate Equivalent Cylinder Radius For Axially Compressed Steel Cone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Khairul Azha A (2011) Real-time face recognition system using radial basis function neural networks. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Aziz, Muhammad Fikri (2017) Real Time Video Processing For Drone-Based Lightning Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aziz, Nur Syafiqah Farhah (2017) Herb leaves recognition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizan, Aniza Nazirah (2018) Time study and work measurement implementation in manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizan, Nurul Sakinah (2019) Impact behaviour of coconut shell reinforced polymer composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizuddin, Abdul Aziz (2009) Kekuatan Gentian Kaca Berlamina. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan, Diana Annasuhah (2022) Effect of partial remelting on microstructure and mechanical properties of thixoformed aluminium alloys. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azlan, Norsabrina (2023) The mechanical properties of 7075 Al-T6 cold sprayed with 6065 aluminum powder. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azlinda, Mohd Nor (2008) Flame Imaging Using Ultrasonic Based Tomography. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azly, Nur Hidayah (2017) Influence Of Chemical Modification On Energy Absorption Of Starch Modified Natural Rubber Based Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Mohamad Izmul Fareez (2023) Shelter based design method of a lightweight and portable by using coconut fiber reinforced polypropylene (PP) honeycomb panel for typical. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azman, Muhamad Ashraf (2019) Mechanical Properties And Fracture Behaviour Of Green Innovative Glass (GIG) Made From Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhammad Kamal (2019) Effect of fused filament fabrication process variables on mechanical behavior of flax. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Muhammad Luqman (2022) Electrical properties of natural rubber reinforced Tin Dioxide Nanocomposites with different filler 98 loading for electrical insulators. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Muhammad Najmi (2017) Bees algorithm hybrid with Hooke method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Noor Erina (2021) Water quality performance analysis using fiber optic sensor based on lateral offset displacement for agricultural application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Nuramira (2021) Corrosion Monitoring Of Galvanized Steel Under Chloride Rich Environment Using Potentiostat Testing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azme, Amirul Fikri (2018) Analysis On Different Length Of Sensor Area Towards The Performance Of Fiber Optic Sensor For Refractive Index Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azme, Mohamad Al-Ameen (2024) Q-switch erbium doped fiber laser using organic saturable absorber. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azmi, Mohd Fairus Firdaus (2012) Flow Modelling Of Nasal Cavity With Various Flow Rate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Ainur Natasha (2022) Application of 7QC tools to analyze defect reduction at a remanufacturing company. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azmi, Azamila Sharmiela (2024) Characterization of bismuth telluride nanocomposite film with graphene/nanocellulose nanomaterials. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Muhamad Izwan Aiman (2023) Experimental study on thermal conductivity performance of oil palm fiberpolyester panel with aluminum honeycomb sandwich. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azmi, Muhammad Adib (2024) Real-time vehicle classification and counting on roads using camera and image processing techniques. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Nur Fudhail (2018) The Investigation On Mechanical, Physical And Environment Properties For Different Method Of Fabrication On Cornstarch Composties Reinforced By Pineapple Leaf Fibre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azri Safwan, Abdul Halim (2011) The Effects Of Metal Inert Gas (MIG) Process Condition On Hardness Of Stainless Steel Claddings Of A Carbon Steel Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azuan , Abdul Aziz (2008) Optoelectronic PH Meter With Display. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azwarni, Mohamad (2009) Effective Implementation Of Process Capability Index Cpk In Minimizing Reject Rate For Batch Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Bachok, Muhammad Yusuf Khatir (2014) Passenger Satisfaction On Information Towards The ITS Components Of Rapid Kuantan Bus Service. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Hisham, Ikmal Hakimi (2024) Evaluation of Aloe Vera extract as an eco-friendly corossion inhibitor for carbon steel in 5M HCl, river water and 3.5wt.% NaCl medium. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Badrulzaman Khan, Elyssa Elnna (2018) Investigation on the tribological and hardness properties of nickel-quarry dust composite coating prepared by various surfactant contents. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahari, Faqrul Izzat (2019) An investigation of bearing faults using vibration meter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahari, Mohamad Zakuwan (2019) Design And Development Of Assistive Device For Tenodesis Rehabilitation People. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahari, Muhammad Najib (2018) Digital Image Correlation On Piping Condition Monitoring Using Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharom, Syazwani (2014) Electrochemical behavior of electroless ternary nickel (Ni-W-P) alloy deposit on iron substrate in 3.5WT % NaCI solution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baharuddin, Muhamad Haziq (2023) Study on rainwater effect on mechanical properties of ageing FS3300PA SLS material with different coating conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baharudin, Muhammad Dhiauddin (2016) Quasi-Static And Dynamic Compression Behaviours Of Biocomposites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharudin, Muhammad Syukri (2018) Effect Of Stitching On Jute Woven Fabric Embedded Thermoset Binder System In Intraply Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahruddin, Nur Farhin (2023) Through user requirement to design wheelchair improvement by integrated QFD, AHP and TRIZ method. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Bakar, Mohamad Basir (2023) Development of single side polished plastic optical fiber intensity-based sensor for humidity detection. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Bakri, Nur Nadiha Tasha (2019) Ergonomics design of walking chair for disable children in classroom. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Balan, Kavina Nishanthini (2018) Design And Development Of Material Characterization Using Microwave Signal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Balu, Kaartik (2023) Effect of surrounding temperature to tensile strength of polyvinyl alcohol (PVA) nanofibers structures. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Balu, Thaneswaran (2024) Machining performance analysis during roughing machining strategy of pocketing profiles using TiSiN coated end mill- Aerospace part. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Bapokutty, Omar and Dhar Malingam, Sivakumar and Rivai, Ahmad and Subramonian, Sivarao and Selamat, Mohd Zulkefli (2018) Fabrication Towards Mechanical Properties Of Aluminium-Kenaf Fibre Reinforced Hybrid As Biodegradable Light Weight Composite Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baskaran, Dilip Rhaj (2019) Effect of ferum loading on the properties of graphitecarbon blackpolypropylene composite as bipolar plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bernard, Joe Baxter (2019) Development Of Vehicle Plate Number And Identity Card Recognition For Guard House Using OpenCV. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Birang, Katerina (2016) Formation of cobalt-doped zinc oxide photocatalyst for synthetic methyl orange degradation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Carvyn, Blaise (2015) A Fibre Optic Sensor On Acetone Concentration Detection Using Beam-Through Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Horng Tat (2010) Study On Haar Classsifier For Machine Learning System That Can Detect Specified Object In Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Xin Zhi (2012) Laser Range Finder Scanning System For Tree Diameter And Circumference Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Alan Kah Poh (2008) The Study Of The Effects Of Surface Roughness Of Loggerhead Sea Turtle Shell In Relation To Drag Coefficient. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Chen Hua (2018) Suppressing Structural Vibration Using Multiple Arrays Of Linear Dynamic Vibration Absorber (DVA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Hui Teng (2018) Degradation behaviour of pineapple leaf fibre reinforced poly lactic acid under stimulated conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Jacky Chen Hsien (2021) Design and development of an improved Wi-Fi based human activity recognition using LSTM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Kin How (2018) The Impact Behaviour Of Hybrid Kenaf/Glass Fibre Reinforced Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Sok Er (2023) Study of vibration on machinery faults in shaft using statistical analysis method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Yit Quan (2020) Cure Characteristics And Electrical Conductivity Of Graphene Nanoplatelets Reinforced Epoxidized Natural Rubber: A Critical Review. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Yoke Lin (2023) Development of face mask detection system using machine vision. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chandi, Mohd Afiq (2017) Electronic Walking Stick For Visual Impaired. Project Report. UTeM, Melaka. (Submitted)

Chang, Siang Yee (2008) The Compatibilizing Effect of Coupling Agent on the Morphological Properties of Banana Fibre as Reinforcement for Polymer Matrix Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Lee Peng (2017) UTeM Vehicle Sticker Recognition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chang , Hin Fuat (2008) A Study Of Corrosion Behaviour Of Aircraft Components Material : Anodized Aluminium 2024-T3. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chang , Weng Soon (2008) Corrosion Behaviour Of Steel For Simulated Concete In Choride Aqueous Solution. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Che Hassan, Siti Nuranisa (2016) Development Depth Video Processing Using Stereo Vision Technique In Sport Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ibrahim, Noraiman Naim (2023) Square ventilation air duct modelling and validation and the effect of angle change using variable air flow. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Che In, Mazhar (2020) Dielectrical Properties Of Alumina Nanoparticles Reinforced Epoxidizec Natural Rubber Composites For Electrical Insulation: A Critical Review. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Musa, Muhammad Faiz (2016) Fatigue Life Simulation Of Spot Weld Joint Structure Based On Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wahab, Nor Fatin Izzati (2018) Effect Of Humidity On The Mechanical Performance Of Joints Bonded With Electrically Conductive Adhesive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Wan, Muhamad Farid (2016) CFD Simulation Of Fluid Flow Parameters In Junction Of Aircraft Hydraulic Pipe System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chea, Kah Mun (2017) Design Of High Viscosity Batter Dispensing System To Enhance The Productivity Of Kuih Bahulu. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheah, Yee Mun (2013) Modelling and experimental investigation on perforated plate mobility. Project Report. UTeM, Melaka. (Submitted)

Chee, Jiann Tong (2010) Develop A Rotating Speed Sensor System With Link To Visual Basic.Net. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chee, Ying Chen (2018) Study On Single Strut Formation Using Additive Layer Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chelliah, Ratnadevi (2017) Incorporating space division at initialization phase of bees algorithm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chen, Wei Keat (2014) Effect of substrate surface condition on thermal cycling behaviour of lead-free solders. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chen, Wei Wei (2018) Tribological Performance Of Hybrid Composites Based On Palm Kernel Activated Carbon And Alumina Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, Lin Yi (2019) Tensile And Damping Properties Of Graphene Nanoplatelets/Carbon Blacks Filled Chloroprene Rubber Nanocomposite For Engine Mounting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng , Yuan We (2008) Tensile Properties And Morphology Studies Of Polymeric Biocomposite. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Cheng Hwai, Aw (2006) A Study On Precipitation Hardening Of 6061-T6 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong, Chi Cheng (2021) Finite element modelling on single and nested mild steel tubes under quasi- static lateral loading. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheong, Jia Mun (2019) FPGA Implementation Of Convolutional Neural Network Using SDSOC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong Jia, Pin (2017) The Effect Of Different Shapes And Perforated Hole Of Direct Recycling Hdpe Plastic As Reinforcement In Concrete Structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew, Ke Chin (2019) Synthesis And Characterization Of Al2O3 Added Fe3O4 Nanoparticles Via Sol Gel Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Pooi Ching (2013) Preparation Of Spent Tea Leaves Filled Polyurethane Composites For Sustainable Sound Absorbing Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Pooi Ching (2013) Preparation Of Spent Tea Leaves Filled Polyurethane Composites For Sustainable Sound Absorbing Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Shong Hee (2018) Design And Analysis For Development Of Natural Based For Scale Model Furniture Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Wei See (2019) Multiple Face Detection For Surveillance Systems. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chiew, Shet Yee (2017) Work posture improvement at plastic printing process in plastic manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chin, Ee Ling (2018) Consideration of hand grip strength in the hand grinder handle to improve subjective comfort and work productivity. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chin, Kean Mun (2017) Formation of cobalt doped zinc oxide photocatalyst. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Eric Mun Hong (2017) Development Of Non-Contact Level Measurement Inspection System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Sook Hui (2022) ROS 2 configuration for delta robot arm kinematic motion and stereo camera visualization. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Wei Sheng (2018) Surface Textured Palm Kernel Activated Carbon Reinforced Polymeric Composite As A Potential Self-Lubricating Bearing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Wen Kan (2017) Design Of A Low Viscosity Batter Dispensing System To Improve The Productivity Of Kuih Rempeyek. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Weng Kong (2019) Design And Implementation Of Deep Learning Enabled Mobile Road Safety Inspection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Yung Oon (2018) Thermal Insulation Material Made From Kenaf Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choong, Mei Teng (2015) Influence Of Additives On Sol-Gel Nanoporous TiO2 Thin Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choong Hui, Ling (2017) Mechanical And Physical Behavior Of Hevea Brasiliensis (Rubber Wood) Sandwich Structure Effect Of Cell Diameter Variation Of Hexagonal Core. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chua, Wei Cong (2019) Development Of A Face Recognition System For Attendance Verification Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chung, Soon Thien (2011) Cough Noise Suppressor For Video Conferencing (An Image Processing Approach). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chye, Wong Jie (2023) Development of bio-lubricant from waste musa paradisiaca enhance by crystallised structure of scallop-shell nanoparticles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

D

Dainil, Nur Fitrah (2019) Effect of carbon nanotube on the properties of graphite–carbon black-polypropylene composite for bipolar plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Danial , Azmi (2012) Real Time Infra-red Tomography For Pipeline Flow Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Darryl, Chai Meng Zhi (2024) Ergonomic design of hand glove for improving grip strength of male adults. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Daud, Muhammad Alif Farhan (2019) The study of super hydrophobic coating based on coconut oil for piping surfaces in power plant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Daud, Muhammad Aminuddin (2024) Development of low-cost vibration monitoring machine learning system on machinery using IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dayang Kartikasari, Abang Abdullah (2009) Mechanical Properties Of Wood Plastic Composite Made Of Recycled Polypropylene And Recycled Wood Flour. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Devan, Sanmugam (2015) Springback Deformation Measurement Of Composite Using 3D Scanner After Curing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dila Afnida, Azman (2010) Feasible Study On Characterization And Comparison Of Accelerated Life Tests And The Compatible Software For Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dollah, Siti Norshamimi (2019) Friction and wear properties of polymer composite matrix made by tapioca starch. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dorah, Norasimah (2014) Activated carbon and graphene based electrochemical capacitor in aqueous electrolyte. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Doraisingam, Sankiran Dharma (2017) Fiber Optic Sensor Development On Liquid Cetirizine Detection For Pharmaceutical Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dzul Fitry, Ismail (2007) Investigation Of Microstrip Parallel Coupled Bandpass Filter For GPS Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulhusni, Othman (2011) Analytical Study On Control Of Buckling Lobe Onset For Hollow Circular Tube Under Axial Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulkafli, Siti Dzulaika (2016) To analyse the works body posture in PHN Industry Sdn Bhd using RULA assessment method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

E

Ee, Wei Xiang (2019) Thermal stress analysis on disc brake rotor by using finite element analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Eh, Zheng Yi (2016) Design And Development Of A License Plate Recognition System Using Convolutional Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ehsan, Abu Bakar (2015) Effect Of Surfactant On EDM Of Low Conductivity Reaction-Bonded Silicon Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elfirah, Ab. Rahman (2009) Reverse Engineering Application In The Development Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elmahi, Saad Ali Eltigani (2016) Fatigue Life Properties Of Alloy Steel At Different Stress Ratio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elyas, Talib (2009) The Mechanical Properties And Morphology Study Of The Silica-PE Composite Using Modified Silica. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elysa Sakinah , Md. Amin (2013) Development Of Image Filtering System For Car Sticker Detection. Project Report. UTeM, Melaka. (Submitted)

Eng, Wei Sy (2013) Merging Of Writer Identification Technology Into Mobile Application For Forensic Document Handwriting Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eng, Qian Hui (2019) Electrodeposition Of Copper Chromium (Cu-Cr) Alloy On Fe Substrate In Deep Eutectic Solvent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Esma Niza , Nawi (2007) Pembangunan Aloi Aluminium Terkimpal Dengan Retak Permukaan Sebagai Spesimen Ujian Tanpa Musnah (NDT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Esmie Khalik Mohamad, Ismail (2008) Vibration - Free Positioning Of Flexible Systems Using Filtering Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ezuddin, Muhammad Harith (2015) Study of corrosion resistance and wear behavior of sol gel coating on AA7075. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

F

Fadhil, Fatin Nur Syahirah (2019) Formation Of Titanium Dioxide Nanotubes Via Two-Step Anodization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadzil, Muhammad Arif Izzuddin (2023) Three dimensional computer aided design application in upper body measurement study using kinect camera. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fairuz Fadzly , Nawawi (2006) Multiple Infrared Sensing Developments. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairuz Fazillah, Shuhimi (2013) The effects of stainless steel on the properties of graphite-polypropylene composite for bipolar plate. Project Report. UTeM. (Submitted)

Fairuzah, Abu Samah (2007) Kajian Kelesuan Ke Atas Logam Dengan Menggunakan Beban Lenturan. Project Report. UTeM, Melaka. (Submitted)

Faisal, Mohamad Fadli (2016) Human Pedestrian Detection For Surveillance System. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Faizal, Muhammad Najib (2019) Development Of A Driver Drowsiness Alert System Using OpenCV. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Faizal Edzuan, Edzzry Indrawan (2020) CFO study of an oscillatory flow across heat exchanger. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fakhrur Rozi, Muhammad Najmuddin (2019) Ergonomics design for supermarket checkout station. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fara Adillah, Che Idris (2009) Design And Analysis Of Floating Pump Platform Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Nadirah, Alias (2008) Pengawal Letak Kereta Ultrasonik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahilda, Masekam (2009) Mapping Corrosion Activities Of Various Concentration Of Acidic Solution In A Pipe Using Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Arafat, Azidin and Zulkarnain, Zainuddin and Yusmarnita, Yusof and Puteri Suriyani, Megat Wazir (2010) Develop Angular Speed Detection System Using Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Waradi, Muhammad Fadli (2018) A Study On Gasoline Engine Abnormal Valve Clearance Using Accelerometer Analyzed By Vibration Signature Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Faridah, Omardin (2009) A Study Of Project Management Based On Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farizul Muiz, Alias (2015) Comparative Study Of Electronic Properties In Pristine And Si-Doped Single-Walled Carbon Nanotube As Gas Sensor: A First Principle Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatehah Hanim, Ahmad Othman (2013) Forecasting Plant Vigor Through Vegetation Index Mapping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Azrin, Muhammad Efandi (2014) Design And Simulate Nanofiber Laser Using Microwave CST. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Nur Athirah, Dol Malek (2015) The Effect Of Interfacial Bonding In The Mechanical Properties Of Degradable Polymer Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauzi, Ramly (2009) Functional Testing And Develop Customer Xperience Solution ( CXS ) Test Procedure For Cubic Electronic Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fazli, Adam Harris (2024) An automatic fish counting system based on machine vision in. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fazrie , Zamri (2005) Thermal Stress Analysis For Brake Pad. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Firdaus, Muhammad 'Izzat Syahmi (2014) Effects of rubber seed shell microparticle addition on polypropylene/kenaf composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Firdaus Abdullah, Hashim (2006) Reverse Engineering Of An Ergonomic Office Chair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Lin Hui (2015) Effect of coating thickness on roof top thermal performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Foo, Yeong Horng (2016) Optical and photoelectrochemical studies of tungsten sulphoselenide (WSSe) thin films for solar panels. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fung, Asnidah Rosleh (2018) Study Of The Buckling Behaviour Of Axially Compressed Cylinder With Sinusoidal Uneven Length. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

Gakim, Miron (2009) Study Of Structure, Microstructure And Corrosion Properties Of AISI 304 Toward Marine Specification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Bee Geok (2010) Mechanical And Thermal Properties Of Pure Nickel As An Alternative Automotive Body Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Kok Hway (2009) Application Of Triz Methodology In Casting Process : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Chin Ket (2020) Comparison Of Empirical And Experimental Studies On Dynamic Mechanical Behavior Of Nanocellulose Natural Fiber In Rubber Based Damping Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Gan, Puoh Yoon (2015) Quality Investigation Of Laser Processed Silicon Wafer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ganesh Kumar , Krishnan (2009) To Investigate Effect of Strengthener Variation in Mechanical Properties of Metal Matrix Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghafar, Mohamad Aliff (2019) Determination Of Mechanical Properties For Light Weight Engine Mount Housing Using Carbon Nanotube Aluminium Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghazali, Azlini (2018) A Study On Patient Bed For Ergonomic Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghazali, Mohamad Fikri (2020) The Development Of Measuring System For Human Body Using Image Processing Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ghazali, Muhammad Hafizuddin (2018) Effect Of Reflow Time On Hardness,Electrical Resistivity And Wettability Of CNT In SAC305. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Go, Sook Huey (2008) The Mechanical Properties And Morphology Study Of The Silica-Reinforced Polyethylene (PE) Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gobal, Satya Narayana (2018) Investigation of mini food processing automation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Goh, Jzun Hwee (2012) Modelling Of Non-Reverberant Acoustic Space Using Statistical Energy Analysis (Sea). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Zia Huey (2013) Performance Characterization Of Photo Materials Used In Silicon Technology Fabrication Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Chee Hui (2021) Simulation Of Fatigue Life Analysis Of Lower Suspension Arm Over Different Road Profiles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Goh, Chia Min (2015) Application of integrated analytic hierarchy process (ahp) and technique of order preference by similarity to ideal solution (topsis) in material selection for automotive fender design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Goh, Chun Hsien (2015) Effect of gelcoat thickness on laminate composite structure and strength. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Goo , Chay Shuen (2011) A Study On The Corrosion Behavior Of Welded 304 Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gunasegaran, Diwagar (2018) Design and development of face detection system for auto lifter rostrum. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

H

H'ng, Zhuang Wei (2013) Design Of Operational Counting Device. Project Report. UTeM, Melaka. (Submitted)

Hadfi, Izzat Hafiz (2016) Banana ripeness detection using image processing and fuzzy logic. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hafiz, Mohd Salleh (2009) Study On Design Of Workstation Meeting Ergonomic Requirement For CADCAM Laboratory In FKP, UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizuddin, Sharingat (2015) Wear Debris Detection And Analysis Of Automotive Engine Lubricating Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hakimi, Akhmal Hakim (2014) Complex additives influence of NiTe2 thin film synthesize by electrodeposition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Halim, Nurul Wahida (2017) Development Of Rubber Track Wheelchair Using Arduino Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halimah , Abd Halim (2010) Design Improvement On Trimming Workstation For Aerospace Company Based On Ergonomics Analysis (Case Study at CTRM AC Sdn Bhd). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hambali, Nurul Ain (2019) Structure analysis in aluminium 6061 using finite element analysis for damage detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamdan, Mohamad Syafiq (2019) Vibration meta-materials for vibration absorber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamdan, Mohammad Noor Zaidi (2017) The study of luminance effect on surface roughness of metallic surface by using vision system technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamidi, Roshidah (2018) Investigation On Electrical Properties,Morphological Analysis And Surface Roughness Of Silver Nanoparticles-Filled Epoxy Conductive Ink. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamim, Mohammad Hadiman (2021) To carry out functional and ergonomic study of the graphene pole pneumatic cutter prototype for further development towards commercialization. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamzah, Iskandar Dzulkarnain (2019) Development Of Smart Glove For Blind People By Using Ultrasonic Technology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamzah, Muhammad Haziq (2018) Comparison Of Laminar And Turbulent Model Of Nanofluid Flow In Microchannel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamzah, Nur Sima Syazwani (2020) Research and development of acoustical panel made from kenaf core. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamzah , Syamsulrizal (2009) The Fracture Mechanic On The Spot Welded Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzaitul Akmarizal, Hamdan (2011) Evaluation Of Mechanical Properties Of Inorganic Based Composities Adhesive By Experimental Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanizat, Nurhidayah (2016) A Study To Design And Fabricate A Prototype Of River Trash Collector System (RTCS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harizan, Ahmad Hafiy (2019) Development of anomaly detection using vision system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Harun, Nurfarahani (2016) Hybrid Vehicle (HV) Engine Vibration Sources Detection And Identification Using Time-Frequency Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasan, Fatin Hanani (2017) Application of integrated Analytic Hierarchy Process (AHP) and Technique of Order Preference by Similarity to Ideal Solution (TOPSIS) in conceptual design selection of hospital beds. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasan, Haliza (2019) Sliding friction performance of dry and oil impregnated palm kernel activated carbon polymeric composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasan, Nur Liyana (2019) Determine The Effect Of Chemical Treatment To The Mechanical Properties Of Parts Produced Using FDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasbullah, Nurjannah (2020) Numerical study on ship motion with LNG tank sloshing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hashim, Mohamad Husaini (2017) Reducing Air Press Turbulence By CFD Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hashim, Muhamad Hanif (2018) Mechanical Dispersion Of Carbon Nanotube For Chloroprene Rubber Compounding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hashim, Nur Aina Markdyiah (2018) Fabrication Of New Filament Wire From Oil Palm Reinforced Thermoplastic Composites As Feed Stock For Fused Depositioning Modeling (FDM) Using Extrusion Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasmat, Feti Nur Alia (2018) The Effect Of Addition Abrasive Water Jet Waste On The Green Strength And Permeability Of Sand Mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassan, Muhamad Haziq (2017) Acoustic characteristic of pineapple leaf fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassan, Siti Elya (2021) Modelling slug and surge on piping vibration. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassan Nusi, Muhamad Irfan (2022) Optical sensor based surface plasma resonance (SPR) with IoT for solution concentrations detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hazirah, Zakaria (2014) Face Recognition Using Eigenfaces Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazizi, Muhammad Zharif Syafiq (2016) Notable Fiber Optic Sensor Development For Petrol Oil Detection Base On Time Frame Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazman , Hasib (2006) Development Of Structuring Anthropometric Database. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haznan, Nur Nasrien Syazwani (2024) Development of e-health education system for people living with diabetes (Web-Based). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Heng, Zheng Wang (2015) Fatigue And Fracture Behavior Of Al-Alloy Plates With U And V Notches Subjected To Fatigue Loadings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Henry, Wellden (2023) Experimental analysis on mechanical properties of coconut leaf reinforced polyester resin. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Hisham, Nur Syahirah Syafiqah (2016) Optimization Of Fiber Optic Acetone Sensor By Using Taguchi Method For Diabetics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Hwa Sheng (2021) Real time face recognition using Raspberry Pi for class attendance system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ho, Jing Wen (2015) Cyclic Voltammetry Analysis Of HgSSe Thin Films. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hooi, Man Poh (2020) Fatigue crack detection in aluminium pipe by using non-linear vibro acoustic method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hosnie, Aina Natasha (2020) A study of percolation threshold on graphene conductive ink filled resin epoxy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hussain, Nadia (2017) Preliminary Study Of Mechanical Properties For Composite Reinforce Pineapple Leaf Fibre Through Impact Tensile And Torsion Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Ibrahim, Ardhi Surya (2017) Healthcare integrated system administration. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Iffah Nafisah (2015) Human analysis and ergonomics of an electric bicycle seating posture. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Mohamad Amir (2023) Development and testing of airflow resistivity system for an acoustic material with rapid prototyping. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Muhammad Zarif (2023) Effect of porous structure parameter on the gas flow in the thermal transpiration pump. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Noor Haya (2016) Preliminary Study On Elastic Profile Of Mix Coconut Fibre And Polyester Resin As Composite Fibre Substitution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idawati , Hatib (2008) Design And Development Of PC Based Software For Time & Frequency Domain. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ideris, Norfatin Mazwani (2018) Design And Simulate Bed Chair With Front Rest For Chronic Patient. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Idzham Hadi, Nurafiqah (2024) Vehicle air-condition compressor monitoring using vibration signal analysis (VSA). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Iffa Marina , Jopri (2013) Effect of heat treatment on the microstructures and mechanical properties of high carbon steel. Project Report. UTeM, Melaka. (Submitted)

Illy Salwana, Abd Razak (2009) The Study Of Cylindrical Tube Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran, Mohd Ibrahim and Mohd. Nor, Husain (2010) Design And Development Of Low Cost Anechoic Chamber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Indera Kasuma, Mohamad Yunus (2012) The Study Of Metal-Filler On Graphite Polymer Composite. Project Report. UTeM, Melaka. (Submitted)

Indera Kasuma, Mohamad Yunus (2012) The Study Of Metal-Filler On Graphite Polymer Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Indrawaty, Mohamad Irfan (2023) Thermal analysis of sugarcane fiber/pol vester aluminium honeycomb panel for hot humid climate application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Intan Salafinas, Ahmad (2009) A Mechanical Study On Cocoa Husk – Glass Fibre/ Polypropylene (PP) Hybrid Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Isa, Nur Afiffa (2017) A Fiber Optic Sensor On Alkaline Level Detection Using Beam-Through Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Isa , Halim and Adi , Saptari and Muhammad Hafidz Fazli , Md Fauadi and Radin Zaid, Radin Umar and Tajul Ariffin, Abdullah (2008) Application Of Ergonomics Analysis And Quality Function Deployment (QFD) To Design A Materials Handling Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Muhamad Shahrul Nadzrin (2018) Analysis Of Stiffness And Strength Of A Complex Topology Optimized Thermoplastic Part Designed For 3D Printing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Muhammad Aqiuddin (2019) Investigation on fatigue properties of natural composite containing coconut coir using DOE method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ishak, Nur Hafizah (2017) Microstructure evolution and mechanical properties of rheocast A1-5Si-3Cu alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Ishak, Nurul Nadhirah (2023) Real-time water quality monitoring using IoT near saltwater area in Sungai Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Iskandar, Meran (2009) Damage Initiation And Propagation Of Sandwich Composites Panel Under Compressive Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Iskandar, Muhammad Syafiq (2018) Development Of Innovative Self-Fabricate Contact Angle Measurement Tools For Hydrophobicity Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Ahmad Syukry (2014) Effect of bentonite and spent bleach earth (SBE) addition on the sintered properties of glass waste composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Mohamad Zaki (2020) Ergonomic assessment for classroom design in FKM UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Mohd Ismady (2019) A design of experiment approach to predict product and process parameters for portable ablution system improvement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Mohd Nor (2017) Temperature And Humidity Effect On Corrosion And Mechanical Properties Of Fences And Gates. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Muhammad Haziq (2016) Experimental Investigation Of Rear Sprocket Failure Of A Fixed Bicycle Using Acoustic Emission And Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Muhammad Syahmi (2024) Development of the drone-based measurement and analysis for construction application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Nurfarah Izzati (2017) Development Of Crack On Composite Detection Sensor Using Magnetic Induction Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Sabrina (2021) The effect of different materials on plasma generation at atmospheric pressure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Shahrul Azwan (2016) Comparisons of mechanical properties between pure polypropylene and polypropylene filled with talc using single gate and twin gate mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Siti Nur Aisyah (2019) Effect of temperature and humidity on the joints bonded with electrically conductive adhesive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail , Najwa (2016) Development Of A Road Line Detection Algorithm For Monitoring Driving Pattern. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismaon, Muhammad Azmi (2018) Design And Development Of Arduino Data Glasses. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismaun, Nazurah (2015) Development out-of-plane of face detection using surf and skin color YCbCr color space technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ithnin, Nur Azura (2015) Carbon nanotube growth from solution processed cobalt catalyst. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Izamuddin, Nur Rohaiza (2019) Investigation on mechanical, physical and environment properties for hybrid method of fabrication on cornstarch composites reinforced by short pineapple leaf fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Izyan Fairuz, Md Rasid (2009) Analysis Of The Stress-Strain Behaviour Of Beam For Different Type Of Cross-Section And Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzad Amir, Abdul Karim (2012) The Effect Of Coconut Waste On Concrete Structure Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzat Safuan, Arif (2010) Effect Of Variation Of Construction Materials On Thermal Comfort Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzuan, Ahmad (2012) The Error Compensation Strategy Using Step Approach For Machining Thin-Wall Low Rigidity Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzul Hazwan , Amir (2013) Strengthening of aluminium alloy 6061 by using precipitation hardening heat treatment. Project Report. UTeM. (Submitted)

J

Jaafar, Mohd Hairol Azaha (2014) Design and manufacture of recurve bow riser using fused deposition modeling (FDM) and fiber-reinforced composite material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jaafar, Mohd Izwan (2014) Effect of chemical modification on tensile properties of thermoplastic reinforced comminution for out of condition aerospace grade carbon fiber prepreg waste. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jafri, Jamaludin (2008) Effects Of Fiber Size Modification On The Mechanical Properties Of Kenaf Fiber Reinforced Polyester Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jahirin, Rachel Lyn (2024) Trace-norm regularisation-based learning framework for blind image quality assessment model. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jaiseelan, Sri Vishnu (2024) Design and analysis of reinforced and unreinforced tank. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamaluddin, Nurul Syifaa’ (2019) Ergonomic risk assessment on laboratory chair user. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamil, Mohamad Hafiz (2017) Effect of fabric covers on improving sound absorption. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamil, Muhammad Aliff (2019) A study on material of book rack fabricated from biocomposite Kenaf fiber-based. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamil, Noor Afizah (2017) Characterization Of Continuous Pineapple Leaf Fibre Reinforced Polylatic Acid Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamingon, Nur Afiqah (2018) Validity and reliability of 3D camera body scanning anthropometric measurement system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jantan, Nurul Hazimah (2014) Graphene and carbon nanotube based electrochemical capacitor in aqueous electrolyte. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jantan, Nurul Hazimah (2014) Graphene and carbon nanotube based electrochemical capasitor in aqueous electrolyte. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jasmee, Solehah (2016) Design And Fabrication Of Vibration Experimental Test Rig For Teaching And Learning. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Javahar, Yasasvini Satkreetaa (2023) Increase production capacity by applying single minutes exchange of die in manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jayaretnam, Pravin (2024) Design & improvement (trash trapping comb) of trash collector system (deploy on Melaka river cruise boat) conveyor type mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jazlan, Nabil Jazli (2018) Development Of A Portable Power Wheelchair With Hand Gesture Recognition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jemat, Hillary (2024) Effect of thixoforming and precipitation hardening on microstructure and mechanical properties of Al-6Si-4Cu-0.3Mg alloy produced by cooling slope casting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jenal, Ruztamreen and Muhammad, Nor Salim and Mohamed Nor, Mohd Khairi and Abdullah, Zulkeflee (2017) Effect Of Steel Bars, Aggregates, And Multilayer In Reinforce Concrete Structure On Acoustic Wave Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jenat, Natali Laura (2019) Study mode shape curvature in aluminum 6061 using cubic polynomial regression method based on simulation data. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Johan, Muhammad Naiem (2017) Study of mechanical properties on fiberglass reinforced plastic pipe under tensile and bending condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Johar, Ameer Hafetz (2016) Fatigue Analysis On Centrifugal Wheel Component Of Automatic Blasting Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Johari, Rafhanah (2017) Leaf vein recognition using roberts edge detection, structuring element and bw area open of canny edge detection technique. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Johari Faisal Stephen, Amirah Afina (2017) Analysis Of Dimensional Accuracy And Surface Finish Performance For A 3D Printer Based On FDM Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jordan, Keith Ogak (2013) Finite element simulation of a rolling process of aluminium. Project Report. UTeM, Melaka. (Submitted)

Jose, Jonathan (2023) Generation of dual-wavelength EDFL by using S-M-S fiber structure as a comb filter based on mach–zehnder interferometer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Joseph, Tiong King Ing (2010) Experimental Investigation Of Bamboo-Filled Aluminium Tube Subjected To Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juleza , Zakaria (2010) Oil Palm Empty Fruit Bunch (EFB) Fiber Brick Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Julia, Abu Bakar (2009) Identification Of Cascade Control DC Motor System Using Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jumahat, Muhammad Firdaus (2015) Effect of mixing ratio of polypropylene/ polyethylene and paraffin wax on its mechanical properties using internal batch mixer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jusoh, Siti Fatihah (2024) Surface formation and kerf improvements during single-pass abrasive waterjet cutting on aluminium block. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Justin, Ferdiedica (2018) Comparison Study Of Noise Emission Test Of Different Bus Model From Interior. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juwahir, Eiddi Noor Azizi (2017) Experimental Investigation On Mechanical Properties Effect For New Composition Of Epoxy Resin Reinforced Kenaf Fiber Through Torsion And Impact Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kalam, Muhammad Faiz (2016) Design And Development Of Finger-Vein Capture Device Using Arduino Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kalana, Siti Masbah (2023) Mechanical properties and failure analyses of Bemban fiber reinforced thermoplastic starch matrix composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kam, Pei Yi (2009) Toughness Of Fibreglass Laminated Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal, Nurul 'Aini Haziqah (2018) Tensile Study Of Chloroprene Rubber With Coal Ash As Green Filler Reinforcement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal Ariffin, Nurul Atirah (2016) Physical And Mechanical Properties Of Polypropylene/Reclaimed Rubber Compound. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamalrul Ariffin, Nur Athirah Syuhada (2020) Current ratio analysis on design and modelling A 22 nm bilayer Graphene and high-K/metal gate (TiO2/ WSix) NMOS device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamar, Nurul Zarifah (2017) Tribological Study Using Pin-On-Disc For Polypropylene At Different Carbon Fibers Filler Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamar Din, Tasnim (2016) Effect of carbon nanofiber nanofluid on turning of D2 steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruddin, Hazwan Fikri (2021) The effect of fibre and nano materials on mechanical strength of polylactic blend. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruddin, Muhammad Nur Azuan (2014) Eco design study of aluminium alloy 5052-H32 and aluminium alloy 6061 for recreational airboat. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarudin, Ain Nurkamilia (2017) Study And Development On Pattern Classification System For Empty Fruit Bunch Based On The Age Profile Of Oil Palm (Elaeis Guineeniss) Trees. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Ariffin, Zakaria and Mohd Afzanizam, Mohd Rosli and Ahmad , Rivai (2009) Environmental Effects On Fibreglass Laminated Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Azwan, Nuratirah (2023) Analysis the works body posture on fruit handling activity in agriculture company (Oil palm industry). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarularifin, Kamel (2007) Fabrikasi Dan Ujian Terhadap Model Bot Persiaran. Project Report. UTeM, Melaka. (Submitted)

Kamarulzaman, Cik Marlissa Maisarah (2022) Mechanical and physical properties of plastic waste mixture in concrete. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruzaman, Ain Bashirah (2024) A study on conventional pump system using vibration signal analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamizi, Nursyafika (2017) Effect of PLA as bonding agent on the properties of pineapple leaf fibre-starch composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kanagasabai, Aravindan (2018) Development of automated attendance system based on facial recognition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kanipar, Jenani (2019) Development And Implementation Of Smart Econimic Fire Crisis Controller Using Raspberry Pi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasim, Muhamad Luthfy (2019) Effect of fiber loading of biocomposite fused filament fabrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kasri, Nur Shuhada (2023) A compact and low cost online flood level monitoring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Katimin, Nornaziera (2017) Synthesis of aluminium doped zinc oxide thin film prepared using chemical bath deposition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kauthar , Ahmad Tajudin (2009) A Study Of Flaw Entrapment Efficiency In Penetrant Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Soon Han (2008) Influence Of Processing Methods And Fiber Size On Rheological Properties Of Hybrid Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Kuo Zhuan (2009) Improvement On Rotary Draw Tube Bending's Parameter By Design And Analysis Using FEA Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kek, Shian Ghee (2018) Design Improvement Of A Better And Healthier Toilet Stool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kek, Soo Ling (2014) Unsupervised image classification using isodata and fuzzy C-Means. Project Report. UTeM. (Submitted)

Khairil Azman, Md Akhir (2011) Real Time laser based Tomography For Pipeline Flow Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairill Anuar, Sakan (2008) Reka Bentuk Struktur Rekreasi (Kajian Struktur Raket Tenis). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul, Khairil Azwa (2015) Investigation of mechanical and morphological properties of spent bleach earth (SBE) reinforced glass waste composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairul Aiman , Mohd Kamil (2015) Reverse engineering of spur gearbox. Project Report. UTeM. (Submitted)

Khairul Anwar, Ibrahim and Farhan, Hanaffi (2014) Investigation Of Surface Tracking And Erosion Resistance Performance Monitoring And Optimization Of Solid Insulation Materials Under Electrical Stress & Environmental Contamination. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Azri, Mohamed Yusof (2008) Temperature Control Using Analogue Pid Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Fadzly, Kushiar (2011) Pest Repeller System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Idzham, Hasni (2008) Study On Fracture Toughness In Low Carbon Steel Using Compact Specimens With And Without Carburizing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Izad, Jalil (2009) Analisis Hentaman Terhadap Komposit Diperkuat Gentian Kaca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Nizam, Zainuddin (2009) Effect Of Coating Condition On The Corrosion Properties Of Mild Steel Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairun Nazihah , Khalid (2012) Corrosion Behavior Of TiAIBN, TiN And AIN Coating Produced By Magnetron Sputtering On Magnesium Substrate (Using Hank's Solution). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalid, Muhammad Syafiq (2021) The effect of low-frequency vibration varitations in vibro- acoustic test for crack detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khiruddin, Muhammad Afif Akmal (2018) Effect Of Grass Fibre On The Morphological And Mechanical Properties Of Thermoplastic Cassava Starch Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Chee Iu (2015) The Application Of Oil Palm Fiber On Concrete Structure Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Chin Ee (2018) Design And Development Of Ergonomics Table. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Chin We (2016) Fruit Sorting By Machine Vision Technique. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Khor, Huai Khang (2019) Investigation Of Phosphate Type Accelerator (Zinc O, O-Dibutylphosphorodithioate,ZBPD) And Silane (BIS(Triethoxysilylpropyl)Tetrasulfide, TESPT) Effect On The Physical And Mechanical Prope. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Kell Nie (2011) Synthetic Hybrid Laminate Composite Using Polyester VIA Hand Lay Up For Hardboard Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kirno, Muhammad Azlan (2024) Investigation on mechanical and microscopic characteristic of seaweed-based hydrogel for three-dimensional bioprinting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kjeldsen, Yusuf (2009) Comparison For Front Door Passenger Car With Local And Import Car Using Design For Manufacture And Assembly (DFMA) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Aries Chin Chin (2015) Effects Of End Mill Helix Angle On Accuracy Of Thin-Walled Aluminium Ribs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Chen Ren (2020) Develop Ergonomics Standard Extension Angle For Driver Comfort In Malaysia National Car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kok, Fie Kie (2017) Formation Of Cobalt Coated TiO2 Nanotubes By Wet Impregnation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kong, Jedediah Meng Hoi (2017) Drag coefficient reduction of a 30ʻ yaw angle cube subjected to active flow control device by means of numerical investigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kong, Learn Fei (2011) Finite Element Analysis Of Tyre Using Eulerian Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koshila Devi, Sivakumar (2016) Degradation behavior of pineapple leaf fibre (PALF) reinforced biocomposites. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Kresnin, Shamini (2019) Investigation of rice husk content to the mechanical properties of natural composite using doe approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Krishna Moorthy, Sathya Sri (2019) Design and fabrication of composite water tank added with fly ash for residential unit. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ku Abd Rahim, Ku Raihah Saiyidah (2016) Application Of Fibre Optic Sensor (FOS) For Various Cooking Oil Concentration Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ku Aziz, Ku Nurfarah Wahida (2019) Development Of 3D Face Recognition Using Mapped Depth Image. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ku Norfafarina, Ku Osman (2011) The Design/Analysis Of Optoelectronic pH Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kueh , Florence Hui Na (2012) Hardness Variation Of Heat Treated Layer-By-Layer Deposited Nickel Based Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kuichalan, Hesaraaj (2024) The effect of elastomer on the mechanical properties of electrically conductive polymer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kuppan, Sathiyah (2022) Wear performances investigation on aluminium-based metal matrix composite prepared through thixoforming. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kursus @ Othman, Maisarah (2019) Milling On Titanium Alloy Using Hexagonal Boron Nitride (hBn) Nanofluid As A Coolant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kuwn, Yew Ching (2008) The Impact And Flexural Study Of The Polymeric Biocomposite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kwan, Wai Loon (2010) Mechanical And Thermal Properties Of Intermetallic Ni3Al For Automotive Body Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kwan, Chak Yin (2018) High accuracy anomaly detection for cyber physical system using self-organizing map based algorithm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Lagani, Muhammad Shadiq (2019) Vision-based for the recognition and identification of the edge of a tooth saw butt joint shape. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lai, Chii Chung (2016) Effect of surface functionalization by naoh on electrophoretic deposition of h-BN particles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lai, Yan Ling (2017) Ergonomics intervention to improve plastic roll handling process at production area in plastic manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lai, Ying Chau (2017) Design And Development Of Convolutional Neural Network (CNN) Enabled Smart Camera Based User Entrance Intention Detection System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Laina, Muhammad Syaril (2023) Development of optical microfiber sensor for coconut water concentrations using a tapering method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lajim, Mohammad Asyraf Zakwan (2023) Development of optical microfiber sensor for sodium alginate detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lapatelo, Muhammad Hanif (2018) Optimization Parameter Of Surface Roughness For AISI 1018 Low Carbon Steel Using Boron Insert In Wet Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Latuwo, Rahman (2019) Physical and mechanical properties of corn starch blended with polypropylene for future automotive interior parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lau, Carolyn Yee Jie (2019) The Effect Of Heat Treatment Schedule On Mechanical Properties Of Different Carbon Nanotubes Contents In Aluminium Alloy Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Kok Wei (2010) Computer Simulation On Circular Ring Subject To Lateral Compression, Quasi-Static Lateral. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Sie Lin (2019) Investigation On Properties Of Reclaimed Carbon Composite For Assistive Tenodesis Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Sie Yee (2009) Fabrication Of Wood Plastic Composites From Lalang Grass And Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Sin Hong (2018) The Effect Of Sitting Posture In CAD Designer Workplace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Zi Hao (2018) Formulation of glass ceramic foam from waste for low thermal conductivity application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lay, Yan Ten (2015) Effect of different impactor nose on laminated composite structure under quasi static loading. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Beng Choon (2008) Characterization Of Mechanical Propertise On Polystyren E/E-Glass In The Absence And Presence Of Charcoal Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Ching Hung (2021) Conceptual design of the computer mouse for healthy workstation using concurrent engineering method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Chun Khoon (2017) Study on mechanical properties of eco-friendly kenaf fibre reinforced metal laminate structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Hooi Fong (2017) Accuracy Study Of Impeller On Five-Axis And Nine-Axis Machine By Using Powermill And CATIA. Project Report. UTeM, Melaka. (Submitted)

Lee, Jin De (2021) Crashworthiness finite element analysis on aluminium alloy shells under quasi-static axial loading. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Jing Xian (2017) A study on the effect of machining parameters, machining conditions and materials on surface roughness in turning process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Poh Yan (2017) Identification of lateral transfer distance that minimizes twisting and bending motions in workstation design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Ren Xie (2019) Ergonomic Design Of Adjustable Height Standing Platform For Manual Milling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Seih Chung (2017) Structural And Optical Properties Of Zinc Oxide Nanoparticles Synthesize Via Sol Gel Auto Combustion Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Set Foon (2020) Research and development of impact absorption foam made from kenaf core. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Song Jin (2016) Design of noise insulator for metal stamping operation in manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Woei Quan (2018) Optimization of mechanical behaviour of reclaimed carbon fibre reinforced polypropylene by using compression moulding via response surface methodology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Xiao Xuan (2024) Deep learning algorithms for batik design classification. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Lee, Zhao Lun (2018) Open CL Based FGPA Implementation Of Object Detection Using Convolutional Neural Network. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lem , Zhi Xian (2012) Assessment Of The Hand Grip Strength And Hand Injuries For UTeM Sportsperson. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leng , Siong Cheng (2011) An Investigation Of The Effect Of Various Heat Treatment Processes On Microstructure And Stress Corrosion Cracking (SCC) Of Aluminium Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Shu Teng (2013) Performance Analysis Of Mineral Fibre Reinforced Polypropylene. Project Report. UTeM, Melaka. (Submitted)

Leong, Shu Ching (2011) Classification Of Hand-Writing Identification Based On ANFIS. Project Report. UTeM, Melaka. (Submitted)

Leong, Desmond Chen Hui (2017) Developing An Interfacing System For Home Farming By Using Labview And Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leong, Kok Seng (2018) Post processing techniques of 3D printed part and its effects on mechanical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lias, Muhammad Hanif (2021) Determination Of Failure Probability Using Fault Tree Analysis: A Heavies Column System In Chemical Plant Case Study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liaw, Geok Pheng (2014) Design vision system to recognize the scribed number on the wafer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lie, Ahmad Faisal (2018) Design And Simulate Autonomous Steam Iron Stand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Lie, , Ken Nie (2013) The rolling effect in mechanical properties of 316L stainless steel for implant materials. Project Report. UTeM, Melaka. (Submitted)

Liew, Bryan Fei Shiang (2018) Development Of Non-Contact Level Measurement Inspection System With IoT Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Liew, Johnnie Zhong Li (2017) Effects of boronizing on grooved metal surface. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liew, Lee Hao (2024) Development of a coin counting system by using machine vision. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liew, Ming Young (2017) Effect of various low frequencies for crack detection in non-linear vibro-acoustic method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Kok Chin (2010) Mechanical And Thermal Properties Of Intermetallic Ni5Al3 For Automotive Body Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Si Qing (2013) Design And Analysis Of Natural Fiber-Metal Matrix Composites For Engineering Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Boon Cheong (2019) Hand Gestures Recognition Using Deep Neural Network. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Boon Hong (2020) Effect of vortex generator on blood flow characteristic on idealized prosthetic heart valve. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Chee Houh (2017) Investigation on the effects of human weight on spinal facet joints using finite elements analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Chin Xian (2018) Incorporating of grey wolf optimization to the bees algorithm for continuous optimization in welded-beam design problem. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Choon Pin (2016) Worker Health Monitoring System Based On SOCSO Standard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Cze Siang (2010) Multi Size Shape Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Hou Hua (2022) System development of image data augmentation using generative adversarial network (GAN). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Kim Yew (2017) Analysis and control of vibration in machine tools. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Reo Sei (2016) Development and acoustical analysis using kenaf and coconut fibres at different fibre loading. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Yan Ying (2019) Electrodeposition Of Nickel Aluminide Based Alloy On Fe Substrate In Deep Eutectic Solvent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Siang Ying (2009) Effect Of Fullerenes Nanofiller And Carbon Black Filler Of Corrosion Activities On Paint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Yee Kai (2008) Mechanical Properties Of Mullite-Bonded Silicon Carbide Sintered At Various Heating Temperature. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lin, Wei Qi (2019) Effect Of Nano Cellulose Industrial Tea Leaf Fiber On The Physical And Mechanical Properties Of Polylactic Acid (PLA) Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ling, Duncan Ruey Shan (2018) Effect Of Stitching On Woven Jute Fabric Embedded With Thermoplastic Binder System In Intraply Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Hung Kit (2017) Optical and photoelectrochemical studies of tungsten disulfide (WS₂) thin films for solar panel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ling, Jia Xin (2016) Study The Properties Of MgAZ91D After The Gas Nitriding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liong, Shun Hsiang (2010) Analysis Of Springback Problem On Aluminum Sheet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lisa, Theng (2011) Natural Hybrid Sandwich Composite For Hardboard Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lisa Umami, Abdul Khalik (2015) Development Of Handwritten Character Recognition By Using Artificial Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liu, Kit Lim (2009) Vision Based Road Line Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liyana, Muhamad Ali (2013) The Effect Of Colouring Agent On The Corrosion Properties Of Glass Composite Tiles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Mun Chui (2013) Performance Analysis Of Mineral Fibre Reinforced Polyethylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Choon Yong (2018) Tribological performance of hybrid composites based on palm oil fibres and alumina powder blend. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loh, Hao Zhe (2015) Process Optimization For Esterification From Non-Edible Rubber Seed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Shern Tien (2020) Active tuning of dynamic vibration absorber (DVA) for suppresing structural vibration. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loh, Yen Ching (2015) Development and analysis of new intraply for glass fiber and kenaf fiber in composite structure applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loh , Yau Weng (2008) Study On The Efficiency Of Services Provided By Post Office Using Simulation Modelling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lok, Yian Yian and Khoo, Chin Foon and Tee, Boon Tuan (2007) Mathematical Modelling Of Stagnation Point Flow Induced By Accelerating Motion In Micropolar Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lok, Soo Kee (2017) Accuracy Study Of Car Rim On Five-Axis Simultaneous Milling And Nine-Axis Turn-Mill Machine By Using CATIA V5. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lok, Yong Kheng (2024) Parametric study on flow streaming for thermoacoustic. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loke, Wai-Eu (2019) Deep Learning Inference Engine Speed-Accuracy Trade-Off Analysis For Person Search. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loo, Chooi Heng (2011) Thermal-Stress Analysis Of Cross-Drilled Disc Brake Rotor For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loo , Chooi Heng (2011) Thermal-Stress Analysis Of Cross-Drilled Disc Brake Rotor For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lou, Ke Xin (2024) Mechanical properties of glass fiber polyester hybrid composite filled with sugarcane bagasse. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Louis, Shirley Lorita (2016) Sodium Alginate Concentration Derection Using Fiber Optic Component As Sensor Element. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Louis, Teo Cheah Hong (2015) The Effect Of Semi-Vertex Angle On The Buckling Of Cylinder And Cones. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Say Soon (2010) Least-Squares Parameter Estimation And Its Application In Electronic Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Yin Fen and Izadora, Mustaffa and Norhashimah, Mohd Saad (2006) Medical Image Compression Using Wavelets For Telemedicine Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Xian Min (2017) Automated waste separated machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Low, Yi Hang (2024) Effect of different doping method on the performance of NiO and NiO doped copper for HTL in inverted perovskite solar cell. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lu, Kian Hap (2015) The Effect Of Material Discontinuity On The Flanges Of Axially Compressed Cylinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lye, Michelle Chuok Fang (2018) Effect Of Stitching On Kenaf Woven Fabric Embedded Thermoset Binder System In Intraply Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M

M. Azman, Akalili Asilah (2019) Investigation on the characteristic of thermoplastic cornstarch composite reinforced short pineapple leaf fiber (PALF) By using mixer method of preparation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M. Noorawi, Norliana Izaty (2019) Strength of the welded medium carbon steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M. Zain, Wan Zafirah (2018) Developing A Blind Image Quality Assessment (BIQA) Model Based On Image Local Contrast Features. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maarof, Muhammad Syahir (2022) Development of thixo-laser engraving process for pewter product development from recycling tin. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Madzuki, Muhammad Ihsan (2017) Force effects on laminated rubber-metal spring using transmissibility test numerical approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mageswaran, Thanujha (2024) The effect of rice husk ash and silica as admixtures on the properties of concrete. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahadi, Mohamad Farid (2017) Comparison Study Between HSC 70 With DMU 60 EVO Using Powermill Software On Simultaneous 5-Axis Machining Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadi, Nur Athirah (2017) Tensile properties and swell behaviours of natural rubber modified by starch for biodegradable rubber product. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahamad Azudin, Muhamad Daniel Azrai (2019) Analysis of sound insulation of trim materials in car using kenaf fibres with sea. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahendran, Ramaiah (2008) Material Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahfor, Muhammad Nurfaidhi (2016) Development A Liquid Sensor Using Fiber Optic For Engine Lubrication Oil And Optimization Using Design Of Experiment (D.O.E.) Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahidan, Fairuz Mardhiah (2018) Investigation Of Buckling Behaviour Of Axially Compressed Cone With Uneven Axial Length Having Sinusoidal Waves. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahzan, Johar (2010) Effect Of Solution Annealing On Microstructure, Corrosion And Mechanical Property Of Sensitized AISI 316. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maidin, Nur Fadhilah (2017) Application of coconut fiber-PP composite for fabrication on interior part of automotive component. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mak, Kien Keng (2010) Design And Analysis Of Cast Metal Matrix Using CAD Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mak, Kien Keng (2010) Design And Analysis Of Cast Metal Matrix Using CAD Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Manivanan, Logeswaran (2017) Optimizing CNC turning process parameter to reduce surface roughness of aluminium alloy 6061 in wet and dry conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Manokaran, Sivaneswaran (2023) Experimental analysis on mechanical properties of pineapple leaf reinforced polyester resin. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mansor, Muhammad Hanif (2018) Preliminary Study Of Mechanical Properties For Different Composition Of Kenaf Mix With Natural Binder Through Impact Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mansor, Muhammad Hilmi (2020) Gear failure analysis and health monitoring plan on the mechanical component of an amusement park equipment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mansor, Nur Atiqah (2017) Deveploment Of Brake Oil Monitoring System Tool Using Application Of Fiber Optic Liquid Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Manveeran, Lingeshwara (2019) Study of compression strength of glass fiber reinforcement with concrete. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Marani, Rahmat (2009) Analisis Dalam Menghasilkan Plastik Diperkuat Gentian (FRP) Menggunakan Plastik Terbuang Dan Sabut Kelapa Sawit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marzuki, Muhammad Shamil Alif (2018) Study of mechanical and thermal properties of HDPE in response to accelerated thermal aging. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mashirnani, mohd Tahir (2012) Fruit Sorting Based On Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mashitah, Razi (2015) Effect Of Pineapple Leaf Fiber Length On The Properties Of Pineapple Fiber : Starch Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masihah, Abd Halim (2007) Kajian Kesan Lapisan Serat Dan Suhu Pengerasan Ke Atas Komposit Laminat. Project Report. UTeM, Melaka. (Submitted)

Masni, Ahmad Basri (2009) Mengkaji Sifat-Sifat Mekanikal Campuran Plastik Buangan Yang Terdiri Daripada Plastik Jenis PET, HDPE Dan PS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masrom, Muhammad Azry (2020) Three-Dimensional Image Reconstruction Using A Stereo Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mastura , Maarof (2007) Flow Investigation Around Immersed Bodies In Subsonic Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masyop, Nur Fatikah Hanim (2018) Examination Of Buckling Behaviour Of Axially Compressed Cylinder With Uneven Length Having Square Waves. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Amin, Fatin Nur Amira (2018) Cryogenic Carbon Dioxide (CO2) cooling on machined surface of titanium alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Mat Hassan, Mohd Iqbal Hakim (2016) Dynamic Fatigue Analysis For Spot Welded Joint Based On Natural Frequency Due To Cycling Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Hassan, Muhamad Hafis (2016) Study The Material Performance Of Aluminum-Zinc And Galvanized Iron For Roofing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Jahari, Nur Farrahim (2017) Optimization Of Fiber Optic Sensor In Detecting The Condition Of Sunflower Oil For Food Industry Usage By Using Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Nasir, Mohamad Afiq Danial (2023) Finite element modelling study on delamination behavior of composite material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Rozi, Muhammad Ibnur Ameerul (2023) Design analysis of the X-axis assembly of a newly developed 3D router machine using finite element analysis. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mat Yamin, Ahmad Kamal (2018) AutoCAD 2017: Creating a Drawing Template. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) AutoCAD 2017: Setting Up the Drafting Tools. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) AutoCAD 2018: How to get a free 3-year education license. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) Exercise 1: Creating a 2-D Geometry in AutoCAD2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) Exercise 2: Creating a 2-D Geometry in AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) Exercise 3: Creating a 2-D Geometry in AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) Exercise 4: Creating a 2-D Geometry in AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) Exercise 5: Creating a 3-D Solid Model in AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) Exercise 6: Creating a Revolved Feature in AutoCAD 2017. [Video] (Unpublished)

Mat Yusof, Azira (2019) Effect of tensile test specimen geometry on mechanical property of 3D printed single struts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Yusop, Alia Nur Fatihah (2024) Optimization of investment casting parameters for propeller hub to improve mechanical properties LM25. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Zin, Nurul Halwanie (2015) Redesign the toilet seat by using ergonomic approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mathadi, Muhammad Salim (2023) Design and development of user-friendly smart switch wiring and casing that endure local climate environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mathialakan, Sarvina (2024) Development of a refractive index sensor based on changes in the radius of a u-shaped plastic optical fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazalan, Muhammad Danial Farhan (2017) Optimization Of Tensile Strength Via Optimal Processing Parameter For High Density Polyethylene (HDPE) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhamad Hafeez Fikri (2016) Microstructural characterization and mechanical properties of semisolid A356 aluminium alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazlan, Muhammad Hazim (2022) Development of smart body temperature recording system using RFID tag. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazlan, Muhammad Nasiruddin (2019) Waste engine oil influence on viscosity and rheology properties of asphalt binder. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazlan , Khairunnisa (2016) Design The Sensor For Obstacle Avoidance For Underwater Application Using A Laser Distance Finders. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazli, Amirul Husaini (2018) Examination Of Buckling Behaviour Of Cone-Cylinder Transition Under Axial Compression. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazli, Nur Hisyam Afandi (2023) Optimization of abrasive waterjet cutting process on fiber glass reinforced polymer in order to reduce delamination and improve cutting surface quality. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazliyana, Ayub (2009) Ultrasonic Cane For The Blind : Transmitter And Receiver. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mazuri, Mohamed (2015) Determination Defect And Mechanical Properties Of Carbon Steel Plate With Different Current Value Using SMAW Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Afindi, Muhammad (2013) Fabrication And Characterizations Of Hydroxyapatite (HA) / Chitosan (CTS) Composite Layer Onto Titanium Alloy (Ti-6AL-4V) Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ali Shifudin, Mohamad Hatim Arrazi (2016) Feasibility Of Coconut Grated In The Production Of Chipboard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Azmi, Noramira (2017) Effect of fly ash particle size and composition on the properties of electrodeposited nickel fly ash (Ni-FA) composite coating on aluminium alloy 7075 substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Fua’ad, Jamian (2010) Merekabentuk Dan Menghasilkan Blok Uji Ujian Tanpa Musnah (NDT) Untuk Aplikasi Ujian Ultrasonik (UT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Isa, Nur Sarah Farisya (2023) To improve the crutches design from the existing prototype. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Md Khirom, Aini Rahayu (2015) Structural characterization of hgse2 thin films by electrochemical route. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Kurdi, Muhamad Anwar (2016) A Development Of Fibre Optic Sensor For Detecting Alcohol (Ethanol) Level In Perfume. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Muzzammil , Md Jais (2007) Temperature Measuring Apparatus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Nasir, Mohamad Hayatunnufus (2014) Tribological properties of carbon fiber prepreg waste reinforced thermoplastic composites prepared via melt mixing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Noah, Jamal and Marizan, Sulaiman and Siri Norasmah, Mohtar (2003) Analysis Of Conductivity And Current Carrying Capacity Of Aluminum Conductor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Noor, Mas Nasabillah (2019) Optical Character Recognition Using Template Matching. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Noor, Muhamad Amzar (2023) Product design and analysis of automatic motorized cat feeder for large cage sizes. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Md Noor, Muhamad Fahmi (2017) A Study On Impact Properties Of Hybrid Oil Palm Empty Fruit Bunch/Kenaf Reinforced High Density Polyethylene Composites For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Razali, Juliana (2016) Automated Packaging Visual Inspector Using Template Matching Algorithm In Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Razali, Norshakira (2017) Fiber Optic Sensor Developement For Vehicle Gear Oil Monitoring Performance Using Multimode And Single Mode Fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Roslan, Muhammad Muttaqin (2018) Image Compression Using Discrete Cosine Transform (DCT). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Saad, Nur Fatin Izzati (2023) Response surface methodology on the selection of natural fiber properties in the sound absorption coefficient. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Said, Mohd Ashraf (2011) Portable Distance Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Salleh, Rabiatul Adawiyah (2016) Fiber Optic Sensor For Sodium Chloride Concentration Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Shaidi, Muhammad Nabil (2019) Home Plantation Soil Moisture Monitoring System Using IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Zain, Muhammad Farisi (2020) Ergonomic design of walking chair for disable children in the classroom. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md. Alias, Muhammad Afham (2021) Flexural properties of kenaf fibre reinforced PLA composites subjected to size of kenaf fibre by using finite element analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md. Mussa, Md. Norazree (2018) Degradation of physical and mechanical property of starch modified natural rubber composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md. Radzai, Said and Amzatul Akmam, Mokhtar (2005) The Crushing Of Cellular Filled Thin Tubes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Radzai, Said and Amzatul Akmam, Mokhtar (2005) The Study Of Finite Element Analysis On Aluminium Honeycomb Under Biaxial Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Megat Mohd Asri, Puteri Nur Aisyah (2019) The mechanical and physical properties of pineapple leaf kenaf fibre reinforced vinyl ester hybrid composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mellvyne, Sigo (2007) Design For Manufacture And Assembly (DFMA) Evaluation Of Car Audio Front Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Meor Muhsin, Fadzil (2011) Determination Of Vibration Input Power From A Structure-Bone Source. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mhd Sharif, Mhd Alif (2018) Fabrication and characterization of polyacrylonitrile electrospun nanofibers with conductive particles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mletchumanan, Dharshani (2019) Investigation of coconut coir content to the mechanical properties of natural fibre reinforced composite based doe approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Moamad Izzudin, Abdul Hamit (2010) Mechanical And Microstructure Characterization Of Oil Treated Aluminium Alloy 7075. Project Report. UTeM, Melaka Malaysia. (Submitted)

Moey, Chung Min (2017) Investigation On Flexural And Morphological Characteristics Of Novel Hybrid Oil Palm Empty Fruit Bunch/ Kenaf Reinforced High Density Polyethylene Composite For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Effendi (2009) The Development of Key Performance Indicators (KPIs) at an Aerospace Manufacturing Company. Project Report. Penerbit Universiti Teknikal Malaysia Melaka.

Mohamad, Ismail (2010) Ergonomic Assessment In Manufacturing Industry (Jati Beringin Sdn. Bhd.). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Ahmad Tarmizi (2018) Effect Of Thermoplastics Corn Starch Composite Reinforced By Long Treated Pineapple Leaf Fibre On The Mechanical, Physical And Environment Behavior. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Aiman Hakim (2021) Design ultrasonic testing defect characterization apps. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Azrin (2016) Development Of Barcode Scanner Using Handphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Effendi and Sulaiman, Mohd Amri (2016) Simulation-based approach to Lean Manufacturing. Project Report. Penerbit Universiti,UTeM.

Mohamad, Marina (2019) Characterization Of TiO2 Coating Prepared By Thermal Spray Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Mohd Syafiq Syimir (2015) Finite Element Analysis Of Tray Cover Design For Digital Versatile Disc Player. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Aizat Hazraf, Mohd Sukri (2015) Effect Of Sliding Speed On Tribological Properties Of Elevated Temperature Palm Kernel Activated-Epoxy Composite (PKAC-E). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ali, Umi Syazana (2019) Digital reproduction of Malay relic components obtained from non-contact laser-based reverse engineering system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Amiruddin, Nor Azizan (2009) Study Of Application Of Light Weight Concrete. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azwadi, Mohamad Nuzam (2011) A Study Of Friction Control For Damping System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Buhori, Fauzi (2007) Kajian Kelesuan Terhadap Logam Menggunakan Bebanan Mampatan. Project Report. UTeM, Melaka. (Submitted)

Mohamad Eezafri, Mohamad Fazee (2010) Design Optimization Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Elfizi, Serat (2009) Kajian Ke Atas Bahan Buangan Sebagai Bahan Menjimatkan Tenaga Di Dalam Sektor Pembinaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fadlizan, Rosni (2009) Vibration Insulator From Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fais, Mohamed Zamri (2015) Penyiasatan Perambatan Gelombang Akustik Pada Struktur Konkrit Bertetulang Dengan Bar Keluli Tertanam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fauzi, Abu Bakar (2008) Study Of Acrylonitrile Butadiene Styrene Properties By Fused Deposition Modeling (FDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fauzi, Abu Bakar (2008) Study Of Acrylonitrile Butadiene Styrene Properties By Fused Deposition Modeling (FDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fazli, Husain (2009) The Influence Of Cu-Reinforced Aluminium Metal Matrix Composite To The Mechanical Properties, Corrosion Resistance And Microstructure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fodzi, Nurul’Ain Haniyun (2019) Environmental And Physical Properties Of Thermoplastic Cassava Starch Beeswax Reinforced With Sugarcane Bagasse Fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Hanif, Puzizer (2015) Fatigue Study Of Aluminium Alloy At Different Temperatures In Faculty Of Mechanical Engineering, Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ikram, Mohamad (2015) Human Activity Analysis Using DELMIA Ergonomics On JTKP Milling Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Jamil, Nur Najaa Mastura (2017) Effect On Vibration Amplitude In Aluminium Rectangular Plate Using Simulation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Kamal, Khalid (2011) A Study On The Effect Of Disc Geometry On Thermal Capacity Of Disc Brake Rotor Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Mustaqiim , Che Hassan (2010) New Technique Of Plastic Mould For Thermoset Composite Fabrication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nasrul , Hashim (2009) Fiber Optic As Electric Current Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Qabil, Ismail (2015) Design Optimization Of Saddle Support For High Capacity Pressure Vessel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ridwan , Ramli (2013) Cutter Path Strategy For Machining Craniofacial Medical Implant PEEK Composite. Project Report. UTeM, Melaka. (Submitted)

Mohamad Ridzwan, Ishak (2007) A Comparison Of Mechanical Properties Between Kenaf Core Fiber And Kenaf Bast Fiber Reinforced Polyester Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ropidi, Mohamad Firdaus (2024) Effect of EDM wire cut waste in long fiber form on mechanical properties of laminated glass composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Rosli, Muhammad Hafiz (2022) Development of pattern on ceramic surface with parameters manipulation for laser engraving process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Rosli, Zatil Aqmar (2018) Design And Analysis Of Automated Optical Mark Recognition (OMR) System Using Image Processing Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Sattar, Syarizal Azim (2016) Design And Finite Element Analysis Of Ergonomics Prosthetic Leg. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shahrul Effendy, Kosnan (2010) Finite Element Of Human Spine CAD Model Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Sofi, Muhammad Ayyub (2023) Alteration of copper surface by using laser engraving process for deep pattern marking. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Syahrul Aswadi , Mohamad (2007) Pembangunan Aloi Ferus Terkimpal Dengan Retak Permukaan Sebagai Spesimen Ujian Tanpa Musnah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Yusof, Izzat (2018) Effect of annealing temperature on structural properties of aluminium doped zinc oxide nanoparticles synthesized via sol gel auto combustion. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Yusuf, Muhammad Azizi (2024) Designing age-friendly bathroom spaces for aging in place. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohamad Zainal Abidin, Syarafana (2017) Effect Of High Frequency Input Location For Crack Detection In Nonlinear Vibro-Acoustic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zarul, Drahman (2012) Processability And Characteristic Of Thermoplastic Reinforced Comminution For Out Of Condition Aerospace Grade Carbon Fiber Prepreg Waste Via Melt Compounding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zuhaili, Jamaluddin (2015) Simulasi Ujian Impak Menggunakan Analisis Unsur Terhingga Pada Roda Rim Aloi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zuric Adham , Mat Esa (2013) Alat Penghilang Sakit Belakang. Project Report. UTeM, Melaka. (Submitted)

Mohamed Aizat, Mohamed Zahir (2011) Preparation And Characterization Of Banana Fiber Reinforced Polypropylene Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Amin Tawakkal, Nursyafiqah (2016) Application Of Ergonomics Principles For Workplace Arrangement Of Bicycles Workshop. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Nawi, Zulhilmi (2014) Influence of solution process parameter to iron catalyst thin film and particle formation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Razak, Mohamad Ikhwan (2019) A study on effect of laminated rubber – Metal spring on tensile and hardness. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Sabri, Mohammad Fadhil Hanafi (2015) Design An Application Of Microperforated Noise Silencer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Yazid, Siti Nurashikin (2024) Improving the mechanical and physical properties of thermoplastic blends by partial replacement of industrial waste and inclusions of carb. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohamed Zainudin, Muhammad Zarifhilmi (2022) Synthesis and characterization of hydroxyapatite derived from fish bone by heat treatment. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohamed Zoefry, Mohamed Awis Qirani (2019) Ultra lightweight 3D printed immobilization cast for bone fracture treatment in orthopedic. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad, Muhammad Azrain (2016) An Investigation On Corrosion Of Low Carbon Steel Welded Plate In Sodium Chloride Solution. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Arsyan, Kamaruzaman (2009) Heat Insulator From Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Azwan Safwan, Harun (2015) Optimization Of The Fabrication Process Parameters Of An Optical Modulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Faiz, Yahani (2012) Microstructure Analysis On Heat Treated Carbon Steel Material Subjected To External Flame Heating Process (Due To Warpage Control). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fazli, Sahbuddin (2008) Design 15-Way Infra Red Remote Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fitri, Mohamed Ridzuan (2011) Development Of An Automotive Clutch Actuator Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafiz, Basir (2008) Investigate The Effect Of Layer Thickness On Mechanical Properties Of Parts Produce Using RP 3D-Printer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafiz, Abdellah (2010) Selection Of Difference Equation Minimum Model Specification By Correlation Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafizuddin , Shammuin (2013) Insulation materials for home residence building wall. Project Report. UTeM, Melaka. (Submitted)

Mohammad Haniff, Imanina (2019) Cyclic Voltammetry And Charge/Discharge Analyses Of Asymmetric Supercapacitor Based On Graphene/MoS2 And Graphene Electrodes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Iskandar, Seni (2007) The Study of Mechanical Properties and Microstructure of Thermal-Curing Process on Natural Fiber (Kenaf) Reinforced Thermoset Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nadzrul Izamuddin, Najmuddin (2011) Textural Investigation Of Carbon Nanotube Using Nitrogen Adsorption Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nazri, Razali (2012) Resistivity Analysis In Layered Soils. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nur Rasyid , Samsudin (2011) Design Optimization Of Manual Wheelchair Frame Using DFA Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Sabri, Muhammad Haziq (2016) Car Counting Using Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Sofi, Nurfarzana (2022) Development of a smart walking stick for blind people. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad Sufian, Mohammad Ismail Anuar (2022) Physicomechanical properties of clay reinforced plastic waste concrete aggregates. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad Syafieq, Sazali (2015) Anthropometric Dimensions And Preferred Working Surface For The Lecturer Office. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Zamzuri, Noor Adilah Yasmin (2017) Tolerance Stack Analysis Using Tolcap Software For River Trash Collector System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Abbas, Saddam Hamood Ali (2017) Effect Of Defect Orientation In Pipe On Acoustic Wave Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Rozi , Hamid (2013) Finite element micromechanical modeling of aluminium magnesium alloy during plastic deformation. Project Report. UTeM. (Submitted)

Mohd, Siti Zaharah (2017) Effect of wire EDM process parameters on machining charateristics of aluminium alloy 6061 using Taguchi method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Adib Muizzuddin, Mohlis (2008) Predicting Turbulent Flow In A Staggered Tube. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adnan, Mohamad Fahmi Adli (2018) Optimization Parameter Of Flank Tool Wear For AISI 1018 Low Carbon Steel Using Boron Insert In Wet Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adnan Hafiz, Zahari (2015) A Study On The Effect Of Coconut Fiber To Polypropylene (PP) As A Friction Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adzwan, Addly (2008) Quenching- Tempering Effects On Fracture Properties In Carburized Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Afif, Abdul Wahab (2008) Analysis Of Hand Strength For Pinching Activity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Afzanizam , Hamdan (2009) Performance Of Scaled Conjugate Gradient Algorithm In Face Recognition. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Akmal , Ab Halim (2007) Pengesanan Perambatan Retak Dalam Aluminium Tempatan Yang Dilindapkejut Dengan Menggunakan Teknik Pengesanan Visual. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Al-Jufri , Md Zin (2008) Pengesanan Dan Pengawasan Alat Pengesan Bilik Tertutup. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ali, Rosli (2013) Wear Behavior of Carbon Nanotube (CNT)Short Natural Fiber Reinforced Epoxy Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ameer Aiman , Ruhaizi (2013) Improving stability of water based nanocarbon using OH-CNT modifield with polyvinyl pyrrolidone as a dispersing agent. Project Report. UTeM, Melaka. (Submitted)

Mohd Amin, Muhammad Murtadza (2017) Experimental Investigation On Vibration And Shock Test On Packaging Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirul Asyraf, Mohd Zakhi (2013) Preparation And Characterization Of Thin Hard Density Board From Paddy Husk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirul Asyraf, Mohd Zakhi (2013) Preparation And Characterization Of Thin Hard Density Board From Paddy Husk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Arif, Nor Hidayu (2017) A Statistical Model For Deterimining Friction And Wear Of SK 11 In Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Arif , Zaulkefli (2013) Acustic of mosque : the effect of roof shape on it's acoustic performance. Project Report. UTeM. (Submitted)

Mohd Ariffin, Mohammad Faezzie Ezzrie (2018) Facial Recognition Security System For Car Using Telegram Apps. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asannnan, Fitrasari (2017) The Application Of Pineapple Fibre Polypropylene (PP) Composite For Fabrication On Interior Part Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashaari, Omar (2010) Effect Of Chromium Carbide (Cr23C6) Formation On The Microstructure And Corrosion Passivity Behavior Of AISI 316. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashaari, Omar (2010) Effect Of Chromium Carbide (Cr23C6) Formation On The Microstructure And Corrosion Passivity Behavior Of AISI 316. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asri, Laila Nadhirah (2021) Modelling of pneumatic system using system identification approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Asri, Muhammad Ikmal Khazany (2018) A Study On Mechanical, Physical And Environment Properties For Varied Length On Thermoplastics Cornstarch Composite Reinforced By Untreated Pineapple Leaf Fibre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asyraf, Ruslan (2009) The Study Of Comparative Analysis Of Boothroyd Dewhurst (BD) Design For Manufacture And Assembly (DFMA) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azam , Roslan (2007) Dynamic Characterization Of Two Dimensional Flexible Plate Structure Using Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azam, Siti Zulaiha (2015) The use of snakehead fish behavior in round nose bullet design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Azha, Nur Shamira (2016) Notable Liquid Sensor Development Using Fiber Optic Sensor Applications For Brake Oil Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azham , Azmi (2008) Investigation Of Mechanical Properties Of Aluminium 2024 - Stainless Steel 304 Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi, Nur Ain Nazihah (2019) Influence Of Clay Content On Mechanical Properties Of Clay-Polymer Composites For Roof Tiles Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Azizi , Jali (2007) Design For Manufacture And Assembly Of Air Freshener Dispenser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan , Mohamed (2010) Design Of Rigid Board Material From Banana Tree Trunk Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azli, Salim (2012) Dynamic Analysis Of Laminated Rubber-Metal Spring On High-Rise Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Mohamad Huzaifa (2016) A study of cobalt catalyst preparation for carbon nanotube powder growth by using alcohol catalytic chemical vapor deposition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Azmil , Ariffin (2008) Assessment Of Working Posture At Different Workstation Design For Socket Adapter Assembly Using RULA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Badari, Muhammad Khairul Ikhwan (2018) Analysis Of The Bending Effect Of Single Mode Fiber (SMF) Structure Towards The Performance Of Multimode-Single Mode-Multimode (MSM) Fibre Optic Sensor For Liquid Concentration Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Basahahruddin, Azny (2017) Effect Of Carbon Nanotube On The Properties Of Graphite-Carbon Black-Epoxy Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Basar, Jamaludin (2017) Thermal Performance Of Kenaf Composite By IES Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Dzul Fahmi, Mohd Zawawi (2007) Development Of RFID Database Handling System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ermin Alif, Norsani (2013) Human Motion Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Eshra Helmy , Abdul Rahim (2007) A Real Time Barcode Reader For Laboratory Attendance (Hardware). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadhillah , Mohamad (2006) Design A Strain Demonstration Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Syuhada Hafiza (2020) Natural fiber synthetic fiber hybrid laminate for automotive rubber components. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fadzli, Mustapha (2007) Investigation Of Mechanical Properties Of Parts Produced Using 3D Printing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faez, Saharudin (2009) A Study On Impact Response Of Advanced Laminate Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz , Mohd Saisi (2015) Smart sensor system for argicultural. Project Report. UTeM. (Submitted)

Mohd Faizal, Ghazali (2012) Application Palm Kernel Shell Charcoal In Steel Carburizing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal Wai Kai Kee, Fatin Fatihah (2024) The impacts of gamma radiation on the properties of ABS composite membrane. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Faizuddin, Mohamed (2011) Merekabentuk Rasuk Untuk Menganalisis Sifat Ketegangan Tekanan Dengan Menggunakan Tolok Terikan Untuk Rasuk Berlainan Bahan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fakhruddin, Abdullah (2013) Corrosion Failure Analysis Of Weldment Area At Internal Surface Of Carbon Steel Pipe Used In Oil And Gas Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farhan Han, Syaza Najwa (2017) Fatigue Analysis On Bonding Of Aluminium And Carbon Laminate Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farid, Othman (2009) Pembangunan Bahan Bangunan Penjimatan Tenaga. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Mohd Noor (2006) Penyelidikan Tentang Kelakuan Elektrokimia Bagi Keluli Lembut Di Dalam Persekitaran Akueus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fitri, Mustapha (2015) Determination Of Defect And Mechanical Properties For Tungsten Inert Gas (TIG) Welded Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fizal, Nursyasya Amanina (2020) Effect of vortex generator on blood flow characteristic on real patient specific data. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fuad, Mohammad Nur Taufiq (2016) Investigation Of Wear Mechanism On The Ball Bearing Tested By Nano-Oil Using Extreme Pressure Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fuzi, Muhammad Hafiqh Hakimi (2023) Development and characterization on physical and environmental of pineapple leaf fibre reinforced thermoplastics sago starch composite. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Hafeez, Awang Hamat (2009) Modal Analysis On Flexible Plate Structure Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Yaacob (2015) Ultilizing Bamboo As A Non-Fibrous Sound Absorber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairi Fifi, Mansor (2010) Damaged Identification Of Mechanical System via Changes In Their Vibration Characteristics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairudin , Jaffri (2007) Infrared Distance/Height Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairul Anuar, Jasmi (2007) Kajian Kesan Hentaman Terhadap Komposit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanafi, Suhaimi (2008) Analysis Of Porosity And Its Effect On Mullite Bonded Silicon Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanafiah, Muhammad Harzelan (2020) Tensile properties of graphene nanoplatelet reinforced ultra-high molecular weight polyethylene composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Haslay, Ahmad (2010) Investigation On Microstructure Behavior And Haz Hardness Of Stainlees Steel AISI304 At Different Filler Wire Diameter And Volatge Using MIG Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hassan, Farahin (2017) Study Of Fiber Orientation Effect On Mechanical Properties Of Banana Pseudostem Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hazlan, Harun (2010) Application Of Finite Element Analysis (FEA) To Analyze The Effect Of Different Electrode Size In MIG Welding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hazrin, Mohd Ibrahim Khan (2015) The Effect Of Axial Crack Length On The Plastic Buckling Of Relatively Thick Cylinder Subjected To Axial Compression. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmi, Md Salleh (2012) Analysis On CAD Data Obtained From Non-Contact Reverse Engineering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmi , Hamidin (2007) Sistem Penderia Partikel Habuk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmie, Asnan (2012) Strategy For Milling Thin-Wall Low Rigidity Curve Shape Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmy , Hassan (2007) Redesign A Baby Pushchair Through Concurrent Engineering Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hishamuddin , Daud (2007) Aliran Bendalir Sekeliling Hidrofoil Dengan Menggunakan Kaedah Simulasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hizul Azri, Syahidatul Fatimah An-Nur (2019) Investigation Of The Heat Treatment Process To The Adhesion Of Graphene On Copper Foil For Prismatic Graphene Supercapacitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hosni, Muhammad Luqman Hakim (2018) Lie Detection System On Eye Activities Algorithm Using Image Processing Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Idham Khalid , Abu Hasan (2013) Numerical study of fluid and heat transfer in mixing elbow. Project Report. UTeM. (Submitted)

Mohd Ikhwan, Ishak (2014) The effect of carbon content (WT%) to the mechanical and thermal properties of recycle glass ceramic. Project Report. UTeM. (Submitted)

Mohd Ikram , Kamarulzaman (2007) Hardware Development Of Barcode Scanner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Junaidi, Yusuf (2015) Effect Of Sliding Speed On Tribological Properties Of Palm Kernel Avtivated Carbon-Epoxy (PKAC-E) Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamarul Nizam, Abdul Hamid (2009) Optimization Of Measurement Parameters In Non-Contact Measuring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kasim, Muhamad Syazwan Zulhilmi (2023) Characterization and mechanical properties of porous ceramics with different polymethyl metacrylate (PMMA) contents. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Kasmie, Abdul Halim (2009) A Non-Destructive Crack Detection Technique Using Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khaidir, Nur Athirah (2024) The influence of roof tile waste as fine aggregates on the properties and microstructure of green concrete. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Khairi, Afzan Najiha (2021) Development of microwave imaging system using multistatic configuration with phase shifter for spatial object detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Khairi , Mamat (2007) Pengesanan Retak Lesu Dalam Aloi Tempatan Dengan Menggunakan Teknik Pemeriksaan Visual. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairir , Ismail and Md Radzai, Said (2011) Quasi-Static Failure Of Paper Honeycomb Sandwich Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairol Azizin, Toing (2010) Smart Switch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul, Syawal Fikri (2016) Fruit Size And Color Maturity Identification Using Raspberry Pi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Lok Pi, Nur Insyirah Hanani (2019) Development of conveyor system integrated with vision-based inspection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Lutfi, Nordin (2010) Study The Effect Of Heat Treatment Temperature And Time On Carbide Formation And Hardness Variation Of Deposited Nickel Based Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mesri, Mohamad Izzat (2017) Analisis Keselesaan Termal Pada Ruang Peralihan Dalam Kawasan Bangunan Menggunakan Pendekatan Ujikaji. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib, Mohammad Mahbor (2010) Analysis And Modelling Of Projectile Motion With Air Resistance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najmi, Abdullah Sani (2009) Effect Of Heat Treatment Process Of Titanium For Watch Manufacturing Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nashrol, Mohd Nawi (2012) Design And Ergonomics Analysis Of UTeM Bus Cockpit Arrangement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Amal Muaz (2022) Development and analysis of saturable absorber from plant leaf for q-swtiched fibre laser generation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nasir, Mohamad Nazim (2017) Effect Of Stannum On The Properties Of Graphite/Stannum/Polyproplene Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Nabil Syazani (2024) Ai-based handwriting analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nasrul, Muhammad Adam (2008) Penentuan Jangkahayat Kelesuan Terhadap Keluli Tahan Karat Di Bawah Pengaruh Suhu Yang Berbeza. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nassir, Muhammad Nazmi (2024) Characterization of Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) reinforced with pineapple leaf fiber composite for potential application as packaging material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nawar, Nur Qurratu Aini (2018) An investigation on physical, mechanical and morphological behaviour of corn starch reinforced with alkaline treated pineapple leaf fibre. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nazizi, Sungip (2009) Retrogression And Reaging (RRA) Treatment Process And The Effect On Microstructure And Mechanical Properties Of Aluminium Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazri, Muhammad Nazhiim (2020) Development and construction of a small-scale wind tunnel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nazrul, Mohammad Danish Adli (2024) Workbench for burger patty production for SME companies. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nizam, Mohd Syazwan (2017) Effect of direct metal deposition of stainless steel 308 LSi wire on stainless steel 304 base plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nizam, Nurfarihah Natasha (2017) A Fiber Optic Sensor On Acidic Level Detection Using Beam-Through Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nizar, Zainun (2014) Computer Vision Based Barcode Reader For Halal JAKIM Verification System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor, Dayang Nur Salihah (2024) A condition monitoring on gear box using vibration signal analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Noor Asril , Saadun (2014) The Effects Of Heat For Contaminant Removal From Different Shapes Of Cavity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor Ikhwan, Mohd Fauzi (2009) Noise Insulator From Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nooraimy, Muhammad Nor Saifullail (2024) The mechanical properties and microstructure analysis of 308LSi austenitic stainless steel produced by wire arc additive Manufacturing (WAAM) technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nor, Mohd Khaidin (2014) Effect of sintering parameter in copper based alloys metal matrix composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nor Azam, Uzair (2016) Development Of Measuring Device With Memory Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Azinan, Muhammad Afiq (2017) Air And Fuel Flow Analysis Inside The Internal Combustion Engine With Overhead Cam. Project Report. UTeM, Melaka. (Submitted)

Mohd Nor Effendy, Nek Man (2013) Engineering Analysis On Spreader Beam By Using Manual Calculation And Solidworks Simulation Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Norazzim, Mohd Hashim (2012) New Cutter Design To Minimize Part Deflection In Machining Thin Wall Low Rigidity Component. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mohd Norddin, Muhamad Hazrul (2015) A study on the sustainability programs and practices, legislative compliance and the benefits of production losses elimination. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nur Ikhwan, Abdul Samad (2015) The Effect Of Silane Coupling Agent On The Tribological Properties Of Recycled Carbon Fiber Reinforced Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nursarhan , Rosdi (2008) Fabrikasi Dan Analisis Komposit Diperkuat Gentian Di Bawah Beban Paksi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Pauzi, Marliyana (2018) Investigation On The Effect Of Cognitive Ergonomic Of Final Year Student Workload. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Radzai, Said and Amzatul Akmam, Mokhtar (2006) The Quasi-Static Loading Of Local Wood Fiber Filled Rolled Thin Tubes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Radzif, Mohd Afif Najmi (2017) TasMuQ (Tashih Mushaf Al-Quran Authentication). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ramli, Muhammad Amin Shafiq (2023) Simulation and application of nature fiber/polyester aluminum honeycomb for thermal analysis for Malaysian shelter application. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Ramzan, Siti Aishah (2018) Analysis System For Badminton Player Racquet Movement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rasid, Amirul Hanif (2019) Effect of short pineapple leaf fiber treatment on the properties of pineapple leaf fiber- starch composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Razali, Muhammad Azim (2024) A computer vision - based fish monitoring system in aquaculture technology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Razali, Muhammad Danial Haikal (2024) Mechanical properties of jute fiber polyester hybrid composite reinforced with rice husk. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Razali, Nuraisah Asmida (2021) Single mode signal enhancement for defect location in pipe using AE. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Razali, Nur Ramiza (2015) Automatic ablution machine based on image processing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Razi, Supeno (2006) Buckling Behaviour Of Thin Walled Angle Section Beam Subjected To Pure Bending Moment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridhwan, Salamun (2013) Additive Manufacturing For Ergonomic Improvement Of Knee Support Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridhwan, Abd Rahim (2015) Kesan Jenis Anak Gelombang (Wavelet) Di Dalam Pengesanan Kerosakan Gear Bagi Isyarat Getaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzwan, Mohd Hamizan (2024) Study on rainwater effect on mechanical properties of ageing FS3300PA SLS material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ridzwanil Hanif, Ruslan (2013) Materials Selection For Conceptual Automotive Hood Design Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rosdi, Nur Hidayah (2017) Optimization Of Fiber Optic Sensor In Detecting The Condition Of Corn Oil For Daily Usage Of Healthy Diet By Using Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rosedi, Ahmad Aqlan (2018) Dynamic Study Of Coal Ash Based Chloroprene Rubber For Automotive Seal Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rusydi, Mohd Salleh (2011) Analog Active Noise Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saed, Mohamad Azrul Azizie (2024) Effect of secondary amine oxidation on dielectric property of epoxy coating deposited by electrophoretic deposition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Salleh, Mohd Azdhari (2015) Analysis On Kenaf Fiber Effect Toward Compression Characteristics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sapeli, Ahmad Zulfadhli (2018) Polyurethane filled graphene nanoplatelets foam nanocomposites for sound absorption and heat resistance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Seiful Ezuan, Sayuti (2010) Direct Metal Deposition Of Stainless Steel Using Wire Feed Method : An Experimental Study On Microstructural Development And Microhardness Variations. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shaed, Nur Amira Faqihah (2022) Development of 3D defect detection system of automotive parts using image processing approach. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Shaffran , Zainal Rashid (2008) Product Development Using Reverse Engineering (RE) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shaffran , Zainal Rashid (2008) Product Development Using Reverse Engineering (RE) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shafiee, Mohd Khusyairi Azwan (2008) The Effect Of Lead/Graphite On Aircraft Grade Aluminum Alloy Metal Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shah, Azmeirul Azrie (2017) Finite Element Analysis Of Locally Manufactured Engine Mounting Components Under Cyclic Stresses And Thermal Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahrin, Muhammad Hafidzal (2019) The effect of temperature against nonlinear effect in vibro- acoustic method on solid structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Shahrul, Mohd Noor (2008) The Study Of Corrosion On Surface Metal Of Aluminum Alloy (6063) At Window And Door Frame. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahzuan, Ismail (2011) Development Of Automotive Louver Actuator Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahzuan, Ismail (2011) Development Of Automotive Louver Actuator Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shapian , Mohd Shuzaily (2008) Ergonomics Analysis Design Of Computer Table For CAD/CAM Laboratory In FKP, UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shazwan , Mohd Alias (2008) Analysis Of Human Hand Strength For Griping Activity In CNC Machihing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shobi, Asyraf Kasyidi (2017) Effect Of Bonding Agent On The Properties Of Pineapple Leaf Fibre Starch Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shukran, Mohamad Shafiq Hilmi (2019) Arduino based system for ingredient dispensing in Gula Melaka Production. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sofi, Mohd Nur Iman (2022) Upper airways modelling and validation of mandibular advancement surgery using variable airflow and the effect to wall shear. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Suffian, Mohd Thani (2008) Experimental And Finite Element Analysis Of Fracture Behavior Of Fiber Reinforced Plastic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sufi, Muhammad Syakir (2022) Development of assistive device for hip abductor adductor for neurological and spinal cord injury people. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Suhaimi, Muhammad Helmy Haqqim (2014) Design and analysis of an instrument to test reading interpreting drawing skills. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sukri, Nur Hidayah (2024) Effect of AL2O3CNT in dendrite refinement and mechanical properties of hybrid nanocomposite. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Sukri Sazlan , Sapee (2010) Study The Effect Of Different Process Of The Mechanical And Physical Properties On The Coconut Coir Fiber Reinforced LDPE Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sulong, Ahmad Firdaus (2018) Vibration analysis for gear backlash on spur gear. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Syauqee, Mohd (2010) The Application Of Voice Verification For Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Tajuddin , Haron (2007) The Development Of Modular Product Design : Book Shelves. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Tarmiji, Ahmad Kamil (2018) Numerical investigation of water flows inside a microchannel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Yasin, Muhammad Afiq (2018) Preliminary Study Of The Mechanical Properties For Different Composition Of Pineapple Leaf Fiber Mix Natural Binder (Rice) Through Tensile And Impact Test. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Mohd Yassin, Muhammad Arief (2016) A Study On The Challenges Of New Technology Adoption By Composite Industries In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yuhazri, Yaakob and Hasoloan Haery, Ian Pieter and Masni Azian, Akiah (2011) Research and Development of Synthetic and Natural Core Towards Hybrid Sandwich Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yuhazri, Yaakob (2011) Bio-Composite Kenaf Fibres For Pallet Product. Project Report. UTeM. (Submitted)

Mohd Yuhazri , Yaakob and Tajul Ariffin , Abdullah and A. Perumal, Puvanasvaran (2011) Research & Development Of Varim Technique For Thermostat Composite Fabrication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusof, Umi Farrahhanim (2018) Investigation Of Hyperspectral Imaginary Data For Mineral Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusoff , Salleh (2007) Finite Difference Simulation Of A Flexible Rectangular Plate Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusry , Mahamad Ghaus (2007) The Energy Absorption Of Circular Multirings Subjected To Transverse Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaid, Faizzati (2016) Hand Signal Detection Using Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaidi, Ahmad Sofian (2013) Automated Platform For Component Selection For Designing Manufacturing System Facility. Project Report. UTeM, Melaka. (Submitted)

Mohd Zaidi, Ahmad Sofian (2013) Automated Platform For Component Selection For Designing Manufacturing System Facility. Project Report. UTeM, Melaka. (Submitted)

Mohd Zain, Amirul Hakimi (2014) Physical properties and energy absorption of epoxidized natural rubber/reclaimed rubber (ENR/RR) foam. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zainel, Siti Nuraishah (2018) Effect of sugarcane fibre on the morphological and mecahnical properties of thermoplastic potato starch. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zaini, Muhammad Sadiy Syafiq (2019) Ergonomics workplace design in assembly for persons with disabilities. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zainuddin, Arni Nabila (2022) Durability of rubber wood flour-polymer composite exposed to accelerated freeze thaw cycling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zaki, Muhammad Danial (2023) Feasibility study of product material characterization (nylon PA12) under high heat environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zaki, Zakaria (2008) Reban Ayam Elektronik. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Zamani, Mohd Ziaulhadi (2017) Aerodynamic Effect Of Overhang On Turbulent Flow Field Within Two Dimensional Street Canyon. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zamzury , Abdullah Sani (2008) Attendance Mangement System Using Fingerprint Scanner. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Zarul Hazim, Norudin (2010) Product Development Of Semi Automatic Slump Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zarul Hazim, Norudin (2010) Product Development Of Semi Automatic Slump Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zawawi, Khairul Esmail (2020) Design And Analysis Of Mobile Test Bay (Electrical Equipment) For Training Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zin, Adinda Hadirah (2019) Realization of a working prototype of wearable-chair. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zin, Mohamad Azuan (2014) Design analysis of thin walled aluminium 7075 aircraft parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zubir, Nik Mohamad Azren (2014) Influence of solution process parameter to cobalt catalyst thin film and particle formation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zulfadli, Amiruddin (2008) Crack Analysis In Weld Joints Of Pipes In The Oil And Gas Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulkarnain, Muhammad Nasrul Aiman (2024) Investigating usability in enhancing user comfort and productivity through the design and development of Arduino motorized computer monitor arms. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zulkeflle, Siti Nurathirah (2015) A study on hand press grip force for push activity in lay up process at aerospace industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zulkernain, Muhammad Aimani (2022) Development of face mask detection for COVID-19 enforcement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohmad Daud, Nur Rashidah (2014) Experimental investigation of stainless steel by using electrical discharge machine (EDM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohmad Nur, Nabiha (2017) Measurement Of Stress And Strain Of An Automotive Component Subjected To Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohmad Wahi, Muhammad Iqmal Redza (2019) Development Of 3D Image From Camera For ROV Navigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mokhtar, Nurhasyinaz (2017) Effect of equal channel angular pressing on microstructure and mechanical properties on non dendritic LM25 aluminium alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mokti, Nur Zaakhir (2019) Effect of thermoplastics cornstarch composite blend with agar on mechanical, physical and environment behavior. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mong, Guo Ren (2017) A Coupled Simulation Method For A Vortex-Induced Vibration System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mortadza, Siti Fatimah Khadijah (2019) Multiblock Generation For Hexahedral Meshing Of Irregular Profile. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Motea , Zakarya Mohammed Nasser Saleh (2016) Development Of Vision-Based Anomaly Detection System In A Dynamic Environment Using Background Subtraction. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Muda, Azah Kamilah and Syed Ahmad, Syarifah Sakinah and Muda, Noor Azilah and Mohd Yusoh, Zeratul lzzah and Darus, Maslina (2016) Enhance Rotation Invariant Through Moment-Based Function For A Better Representation Of 3D Object Shape Descriptor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad, Hafiy (2019) Digital image correlation on adhesive used in automotive industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Akmal , Mohammad Din (2015) Variation of doping type for sige optical modular with NPN configuration. Project Report. UTeM. (Submitted)

Muhamad Arshad, Nur Nadia (2015) Synthesis of TiO2 nanotubes via anodic oxidation in carbonated bath. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Aszahare, Abdul (2015) Kesan Bebanan Keluli Tahan Karat Terhadap Ciri-Ciri Komposit Grafit Polipropilena Untuk Plat Dwi Kutub. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Faisal, Omar (2011) Work Related Musculoskeletal Disorder Assessment Of Jointing Cable Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Firdauz, Abd. Rasid (2009) The Effect Of Probe Type In Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Hafiz, Hj.Ithnan (2008) Kajian Sifat Kelesuan Bagi Logam Aloi Karbon Rendah Dengan Dan Tanpa Penambahan Karbida Melalui Ujian Kelesuan Menggunakan Daya Tegangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Hafizuddin, Mohd Ridowan (2010) The Design Of A Pre-Assembly Of Blood Collection Tube Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Jamaludin, Ilman Hakim (2022) Effect of hot chamber parameter on the gas flow in the thermal transpiration pump. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Khairolnain, Ghazali (2011) A Study Of Thermal Barrier Coating TBCs For Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khairudin, Mohamad Rus (2015) Investigation of Mechanical Properties For The Dry Carbon Composite Fabricated By Using Resin Transfer Molding Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khairyl Fitri, Mohd Mokhtar (2015) Analytical Modelling And Free Vibration Analysis Of Rectangular Plate With An Arbitrarily Oriented Surface Crack. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khaleel Alyasini, Abdullah (2006) Development Of Image Compression Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Naim, Kasful Anuar (2014) Electrochemical behavior of electroless Ni-W-P alloy deposit on carbide substrate in 3.5wt% salt solution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Najmi, Ahmad Salbi (2015) Wireless Barcode Scanner For Self-Checkout. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Nor, Nor Amalina (2016) Effect of agitation rate and reaction temperature on the size of linseed oil microcapsule self-healing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Norazamudin, Noordin (2015) The Human Analysis And Ergonomics For The Seat Design Of Electric Scooter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Nur Arsh, Mohamad Basir (2007) Design Of An Aid To Assist Handicap/Old People To Toilet/ Shower. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Roslan, Darul Aman (2011) Investigation On Vertical Excitation Of The Structural Integrity In High-Rise Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Syafiq, Md Najib (2013) Investigation on oil palm fiber composite mechanical properties. Project Report. UTeM, Melaka. (Submitted)

Muhamad Yazid, Abd Latif (2010) Producing Calcium Copper Manganese Oxide (CaCu3Mn4012) Via Wet-Chemistry Technique (Percipitation Technique). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Yazid, Abd Latif (2010) Producing Calcium Copper Manganese Oxide via Wet Chemistry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Yusri , Kabol (2008) Eksperimen Dan Analisis Unsur Terhingga Tiga Titik Kelenturan Komposit Diperkuat Gentian. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Zaid, Jamal (2009) Design And Development Of Finger Based Exerciser Device For Computer Games Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Zamri , Jamaluddin (2006) Flow Optimization Of Koi Pond Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afiq, Arsat (2015) Sound Absorption Performance Of Acrylic Based Perforated Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Akif, Mohd Yahya (2015) The Influence Of Crack On The Buckling Of Axially Compressed Truncated Cones. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Akmal Akif , Muhammad Wazir (2013) Experimental of flow measurement over different shape of cavities for low reynolds number. Project Report. UTeM. (Submitted)

Muhammad Ali, Nursyuhada Ismah (2017) Preparation And Characterization Of Banana Trunk Derived Nanocellulose Prepared By Acid Hydrolysis Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Arif, Daud (2015) An Assessment Of Cylinder Deactivation System Applied To Closable Intake Ports In A Small Si Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asyrafuddin, Hanafiah (2011) Development Of An Automotive Parking Brake Actuator Using Shape Memory Alloy (SMA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Azrul Amin, Jamaluddin (2011) Development Of Automotive Side Mirror Actuator Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Erwan , Mohd Kamal (2007) Load Displacement On Multi-Hexagonal Rings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fahmi, Noordin (2015) Reed Grass As Sustainable Sound Absorber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faisal, Jusoh (2008) Penentuan Jangkahayat Lesu Bagi Keluli Lembut Di Bawah Pengaruh Suhu Berbeza. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz, Mohd Timyati (2009) Effect Of Surface Finish On Fatigue Life Of Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz Hafizuddin, Mohd Nawi (2015) Fiber Optic Sensor For Palm Oil Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faizal, Md Ali (2013) Automatic Lamp Illumination System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fared , Rosly (2011) Design And Develop Roofing Mould Using Rice Husk Bio Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faris, Md Yusuf (2009) Design And Development Of Automated Counting Machine For Industrial Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaous, Ismail (2009) Ergonomic Design Of A Baby Highchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus , Jamal (2007) The Study Of Multi-Rectangular Ring Under Quasi-Static Loading. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Muhammad Firdhaus, Ibrahim (2011) Development Of Car Wiper Lifter Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdhaus, Ibrahim (2011) Development Of Car Wiper Lifter Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafizi, Zainal Abidin (2010) To Design and fabricate projectile motion prototype device for students Use In Dynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hanafi , Chee Pi (2007) Design Three Dimensionally Adustable Head Rest (TDAHR) For Car Seats. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hilmi, Hassim (2011) A Study Of Flow Pattern In Autoclave Using Computational Fluid Dynamics (CFD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hilmi Ruzaini , Hashim (2013) Investigation on the effect of recycling palm fiber composite on the mechanical properties. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hizran, Kamaludin (2015) Development Of Pack Boronizing For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Khairi, Baharudin (2016) Effect of aspect ratio on strength of lattice structure manufacturing using 3D printer. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Khairul Nizam, Saaey (2013) Effect Of Particulate Reinforcement On The Wear Properties Of Mg-Al Nano Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nabil, Mohammed Sufian (2015) The Experimental Investigation Of Fatigue Test For Spot Welded Structural Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nadzri, Nur Afiqah Nasuha (2024) Effects of pulse current electrodeposition parameters on the properties of nickel-quarry dust composite coatings. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Nur Ilham, Ibrahim (2015) Segmentation Of Jawi Handwritten Words Into Subwords. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ridzwan , Zulkifli (2009) Ramalan Hayat Lesu Bagi Kimpalan Plat Keluli Lembut. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shahid , Suhaimi (2015) Design and analysis of automotive component for aluminium alloy casting. Project Report. UTeM. (Submitted)

Muhammad Shazwan, Abdul Razak (2015) Effect Of Size PZT Elements On The Excitation Of Phased Array Tranducer In Beam Steering And Beam Focusing Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syamil, Junid (2008) The Fabrication Of Porous Ceramic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syazwan, Rosidi (2015) Performance Analysis On The Effects Of Filler Material On HDPE Plastic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zaid, Saleh (2012) Tool Path Compensation Strategy For Machining Thin Wall Low Rigidity Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zainuddin, Muhammd Khairuddin (2019) The mechanical properties of palm oil fiber reinforced polyproplene composities. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Zharif , Ismail (2006) A Virtual Instrumentation System For Electric Machines Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zhariff Izwan, Mohd Suhaimi (2012) Kajian Pengesanan Dilaminasi Pada Struktur Bahan Komposit Menggunakan Kaedah Masa, Frekuensi Dan Masa Frekuensi-. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zuhair Bolqiah, Edris (2013) SIRIM Counterfeit Sticker Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Hafiz, Abd Kadir (2011) Kajian Proses Pemanasan Dan Penyejukan Seramik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Mustafa, Ghazali (2005) Product Design Consideration For Short Glass Fiber Reinforced Composite Brake Pedal Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Nasae , Mahyuddin (2009) Design And Analysis Of Automatic Slump Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Nurulhafizan, Mahat (2008) Time And Temperature Effects On Fracture Properties Of Carburized Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mun, Siu Hou (2018) Performance Analysis Of Real Time Image Processing For Lightning Event Using Cython And Python Programming Language. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Murad, Nasrul Haziq (2019) The study of flank wear using coated Aluminium Chromium Nitride (AlCrN) boron steel 22MNB5 on aluminium AA6061. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Murni Illiana , Asan (2011) New Proposed Filter With Boundary Function For Image Restoration Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa, Amirul Izwan (2019) A study on new material of car door panel fabricated from biocomposite Kenaf fiber-based. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Musa, Mohamad Dzumalin Faisal (2017) Performance Analysis Of Brass Sheet Under Vibration Impact Test By Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa, Muhammad Rizan (2016) Study Of Fluid Flow In Different Fuel Rail Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muslim, Muhammad Fakhrur Iqbal (2019) Investigation on mechanical properties of 3D-printed single strut. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mustafa, Amirul (2017) An Experimentel Study Of Laminated Rubber-Metal Spring On Axial Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa, Zaleha and Mohamad Juoi, Jariah and Othman, Radzali and Nam, Noor Akmar and Sheikh Md Fadzullah, Siti Hajar and Ishak, Nurfatiha (2017) Effect Of Polymeric Coating On The In-Vitro Degradation Of The Bioactive Tricalcium Phosphate Scaffold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapa, Muhammad Aizat (2017) Experimental Investigation Of Thermal Performance Of Kenaf Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapai, Munirahasmaa (2017) Optimization Of Fiber Optic Sensor In Detecting The Condition Of Palm Oil For SME Industry Usage By Using Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapha, Mohamad Azrul Fahmi (2019) Early fire detection with alarm system using digital image processing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muthu Kumar, Turgah (2018) “Development Of Home Automation By Using Hand Gesture For Physically Disable People”. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Nabiha, Pathil (2015) Finite Element Analysis Of Strain Signal From Charpy Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nabila Aini , Abdul Rahman (2011) Profile Imaging Of Conveying Pipe Via Fan Beam Projection Of Ultrasonic Based Tomography. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nadarajan, Kalegeswaree (2016) Development Of Smart Communication Tool For Assisting Stroke Patient. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Naemah, Ayub (2011) Application Of Palm Waste Product For Raw Materials In Organic Brake Friction Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nafi, Aliaa Syahirah (2019) Image Compression With Discrete Cosine Transform (DCT) By Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Najamhuri, Saiful Aizat (2017) Kesan Daripada Lokasi Getaran Berfrekuensi Rendah Untuk Mengesan Retak Dalam Kaedah Vibro-Akustik Taklinear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Najwa Syafiqah, Samhudi (2015) Fiber Optic Sensor Of Temperature Measurement For Tunnel Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nallathabi, Ugentheeren (2023) Analyses and fabricate saturable absorber film for q-switched fiber laser application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nantha, Muniandy (2008) Mechanical Properties Of Wood Plastic Composite (WPC) Made Of Recycled High Density Polyethylene (HDPE) And Recycled Wood Flour (RWF). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Napi, Fauziah (2016) Circuit defects detection of flexible printed circuit by electrophoretic deposition of organic DYE. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Narasimmanaidu, Satishwara Rao (2020) Numerical study on a partially filled channel with open-cell metal foam. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Narmi, Muhammad Amar Fahmi (2024) Mechanical properties of glass fiber rice straw reinforced polyester hybrid composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nasaruddin, Muhammad Muaz (2016) Development Of Finite Element Model For Polymer Lattice Structure With Different Aspect Ratio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasri, Muhamad Khairul Nizam (2017) Thermal Stress Analysis On Formula Varsity (FV) Disc Brake Rotor By Using Finite Element Analysis (ANSYS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasruddin, Fatin Damiea (2024) Electric field analysis for polymer nanocomposite under different filler loading particles using FEMM 4.2 software. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Nasrul , Harun (2007) Evaluation Of The Capability Of The CFX Computational Fluid Dynamic In The Prediction Of KOI Pond Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Natasha, Abd Hamid (2015) Performance Analysis Of Interpolations Method For Mobile Image Sharing Compression. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazar Shah, Noramin (2017) Comparison Study Of 5 Axis Machine With Different Configuration Using CATIA Software. Project Report. UTeM, Melaka. (Submitted)

Nazarail, Ab Majid (2010) Tensile Fracture Behavior On Temepred AISI 1040 Medium Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazliah, Abdul (2008) Study On Tempering Effects In Gas Carburized Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazran, Ahmad Sufian (2012) Merekabentuk Dan Menganalisis Jisim Optimum Pada Kawalan Lengan Atas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazri, Nur Farihah (2024) Acne detection and severity by using convolutional neural network for internet of healthcare things (IoHT). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Nazri, Syamsul Bahrain (2017) Design And Development Sensor Based Electronics System Of Water Quality Detector. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nermie, Dickson (2012) The Effect Of Primary Relief Angle To The Dimensional Surface Error Of Thin-Wall Components. Project Report. UTeM, Melaka. (Submitted)

Ng, Guan Yao (2010) The Effect Of Coupling Agent Addition To The Mechanical Properties Of Wood Plastic Composite (WPC) Made Of Recycled High Density Polyethylene (RHDPE) And Recycled Wood Flour (RWF). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Shu Tyng (2009) Development Of Computational Model Through Reverse Engineering : Car Side Mirror Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Cher Sean (2018) A study on mechanical properties of hybrid kenaf-kevlarfibre reinforced thermoplastic composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Chin Sern (2017) Effect Of Wave Modulation Measured At Various Locations For Damage Detection Using Vibro-Acoustic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, May Ling (2017) Reduction of yield loss for taping process in semiconductor industry using TRIZ. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Wai Hoe (2017) Effects Of Process Parameters On Strength Of Polymer Lattice Structure Manufactured By Using 3D Printer. Project Report. UTeM, Melaka. (Submitted)

Ng, Xin Ni (2019) Ergonomics Risk Assessment On Manual Material Handling Tasks For UTeM Pembangunan Staff. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Yong Ann (2017) Arduino Based Locker System With Image Capture. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ngin, Wei Chuan (2018) Comparing accuracy, surface roughness and repeatability study of torque link aerospace landing part on five-axis simultaneous milling (linear) and five-axis simultaneous milling (high speed) by using CATIA V5. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ngu, Ung Hie (2016) Effect of fibre size and sample thickness on kenaf core as a potential acoustical material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nie Nasuriana , Sidek (2008) Developing A Face Recognition Software. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nik Ebrhiam, Nik Muhammad Faris (2022) Research and development of low-cost vibration monitoring system with Internet of Things (IoT). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nik Faiz , Nik Ab Wahab (2008) The Effects Of Heat Treatments On The Mechanical Properties Of Law Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Haidar, Nik Abdullah (2009) The Effect Of Woven Glass Lay-Up Orientation On Flexural Strength Of Laminated Polymer Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohammad, Nik Muhamad Arif (2015) Ergonomics and flexible shoe insole. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nik Mohd Hanif, Nik Alwi (2008) Pembangunan Platform Penyelidikan Hidraulik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Zulfalah, Nik Hussin (2006) Analysis Of The Riveted Joint Using Finite Element Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Norzaliza , Long Hassan (2008) Fabrication Of Strontium Ferrite Magnetic Material Through Wet Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Nozita , Mohd Saad (2009) Fiber Optic Microbend Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noh, Ahmad Aizat (2015) Glass bottle defect detection by using image processing technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nonchik, Siti Nur Nadhirah (2018) Comparison of modelling between ARX and ARMAX model in system identification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Akmar, Hassan (2008) Gas Carburizing Effects On Impact Toughness Of Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Aliah, Nordin (2008) Design And Analysis Of Sandwich Beam Make By Combination Of Kenaf Core And Bast. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Ashikin , Jamil (2013) The effect of heat treatment on the microstructure and mechanical properties of 6061 aluminium alloy. Project Report. UTeM, Melaka. (Submitted)

Noor Azamiah, Md Fauzi (2013) Design Of Nonlinear Frequency Selective Limiter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azman, Muhammad Akmal (2017) Development Of Fiber Optic Liquid Sensor On Liquid Paracetamol Concentration Detection For Pharmaceutical Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azman, Nur Nabila (2016) Correlation between resistivity and dielectric performance of polymeric material insulation under standard test procedure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Noor Azwani, Mat Zin (2011) Analysis Of Material Stiffness Effect Against Nonlinear Acoustic Wave Modulation Intensity-Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Diana, Mohd Diah (2009) CMM's Stylus Approach Direction Effect On Error Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Eman, Utok (2015) Design Optimization Of Stiffened Square Plate Under Uniformly Distributed Pressure Of 5 Pascal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Fakhrezah, Matdiris (2012) Experimental Study Of Femur Bone Under Normal Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Farazdillah, Ismail (2009) Production Efficiency Enhancement Using Improved Working Posture Of Material Handling Activity In Furniture Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Fariza, Saari (2011) Investigation The Relation Of Crack Modes With Resonances Excitation In Beam Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Rozali, Noor Hakimi (2019) Development of vibration test rig for teaching and learning. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Noor Syafiq, Shaari (2009) A Study Of Mechanical Properties In Relation With Morphological Structure Of PP/Kenaf Fiber Reinforced Plastic Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Wahidah, Gulam Mahfuze (2010) Experimental Investigation On Sound Transmission Loss Of Acrylic Perforated Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nooradila, Zaine (2015) Fiber Optic Sensor For Corn Oil Concentration Detection And Optimization Performance Using Analysis Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorazmi, Muhammad Naquib (2019) The mechanical properties & microstructural analysis of welded DPS in compliance to a selected international standard. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Afandi, Ahmad Izham (2024) Study the friction properties of treated engine oil with an addition of ZDDP and nanoparticles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Aishah, Mat Jam (2015) The Investigation Of Flow Distribution In Duct Channel Configuration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Alzahari, Nur Farah Hani (2019) Penyiasatan Perambatan Halaju Bunyi Ke Atas Bahan Yang Melalui Proses Rawatan Haba Menggunakan Ujian Ultrasonik. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Ashykiin, Mohammad (2009) Study On Mechanical Properties And Morphology Of Banana-Glass Fibre Reinforced Polypropylene (PP) Hybrid Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azrin, Nozmi (2007) Effects Of Carburizing On Mechanical Properties Of Low Carbon Steel. Project Report. UTeM, Melaka. (Submitted)

Nor Faizah, Haminudin (2013) Effect Of Nanoclay Loading On Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Farhana , Saidina Hamzah (2011) Object Analysis Movement Using Canny Edge Detection (OAMCEDS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hafira Nadia, Cm Hatta (2015) Development And Analysis Of Flexible Thermoplastic Composite Laminate For Anti Stabbing Apllications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hafizah , Adnan (2008) Mengkaji Kesan Pengaruh Kelembapan Relatif Ke Atas Sifat - Sifat Mekanikal Papan Gentian Berketumpatan Sederhana (MDF) Mengikut Keadaan Persekitaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hafizi, Kamaruzzaman (2011) PET Control : Animal Identifier Using Image Processing Approach (CAT). Project Report. UTeM, Melaka. (Submitted)

Nor Halim, Aida Syahirah (2019) Study on mode shape curvature in Aluminum 6061 using cubic polynomial regression method based on experimental data. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Hisham, Muhammad Faiz Affendi (2018) Investigation On Sensitivity Of Fiber Bragg Gratings Based On Optical Attenuation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Mas Aina, Md Bohari and Intan Ermahani, A. Jalil and Amir Syarifuddin, Kasim (2009) The Conceptual Development Of Semantic-Based Image Retrieval And Indexing (CBR) Large Object Databases. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Narisq Dada Meah, Md Rashid (2007) Pengukur Jarak Tanpa Tali. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Shazwan Azrul, Norazni (2015) Analysis On Surface Texturing Design For Wear Protection Of Automotive Engine Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Syazwani Haziqah, Abdul Rahman (2013) Properties Of Chemically Modified Graphene Through Thermal, Compositional And Morphological Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Yatim, Natra Fathira (2023) Mechanical properties and failure analyses of Bemban fiber reinforced thermosets matrix composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norasfadzila, Abu Hassan (2011) Study On The Reverse Engineering (RE) Measurement Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norashid, Norjannahtul Ainah (2017) Buckling Behaviour And Instability Of Tapered Column Made Of Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norashsikin, Mohd Arsad (2009) Investigation On The Effect Of Matrix Variation To The Mechanical Properties Of Metal-Metal Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norasushila , Saleh (2009) Develop Angular Speed Detection System Using Infrared Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norazlan, Muhammad Afiff Eizlan (2024) Virtual home assistant using face recognition. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Norazli, Nordin (2008) The Ergonomic Factor Of A Flexible Writing Table Chair For Left Handed Student. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazlin, Ajali (2013) Large Scale Heat Treatment Of Aluminium Alloy 1050 H24 For Forming Process. Project Report. UTeM, Melaka. (Submitted)

Norazlina, Abd Razak and Shahrudin , Zakaria and Farah Shahnaz, Feroz and Hanissah, Mohamad and Yosza, Dasril (2009) Design Of An Image Sensor Based On Conformal Mapping For Face Recognition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazura, Ibrahim (2008) The Effect Of Different Ceramic Filler Loading On The Mechanical Properties Of Polymer Matrix Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordiana, Sidi (2008) Quenching-Tempering Effects On Hardness And Compression Strength Of Carburized Low Alloy Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordin, Eezsafauzia Azalin (2017) Redesign of UTeM cafeteria workstation for work posture improvement utilising ergonimics simulation software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nordin, Mohd Najmi Naim (2017) Polymer Composite Coating Performance Evaluation On Carbon Steel In Mixed Brine Solution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nordin, Mohd Nur Azmi and Mustafa, Zaleha and Omar, Ghazali and Sheikh Md Fadzullah, Siti Hajar and Mansor, Muhd Ridzuan and Md Isa, Mohamed Hafiz and Masripan, Nor Azmmi and Abdul Hamid, Nurfaizey and Jumaidi, Muhammad Taufiq (2017) Cost Effective Eco-Friendly WPCs Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordin, Muhammad Hilmi (2020) An analysis of thermoelectric cooler driven by thermoelectric generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nordin, Norhamiera (2016) UTeM vehicle information system using QR code with alert message. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norehan , Kasiman (2015) Monitoring and evaluation of the effect of crack on the buckling behaviour of welded cylindrical structures. Project Report. UTeM. (Submitted)

Norfadzlon, Mohd Farid Hakim (2017) Design And Development Of Yamaha Y15ZR Frame Slider (Carbon Steel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhaminudin, Nurul Shaqirah (2019) Investigation Of Fatigue Behaviour Of Pineapple Leaf Fiber Reinforced Polylactic Acid Composited. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norhazreel Saifullah, Baharin (2015) Design And Analysis Of Jacking Point Structure To Lift Heavy-Weight Crude Oil Tank For Annular Plate Maintenance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhidayah , Hashim (2012) Design and analysis of deep drawing die for brass socket by using finite element analysis. Project Report. UTeM, Melaka. (Submitted)

Norhidayah , Mat Yusoff (2008) Hazard Light Using Movement Detector. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norhisham, Muhammad 'Asri (2019) Study to improve product development of river trash collector system by applying design of experiment approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norita, Md. Nasir (2008) Mechanical Properties Of Powder-Based Part Produced By 3 Dimensional Printer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norjulia Suriati , Ghazaly (2010) Empty Fruit Bunch Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norjuliana , Abdul Hadi (2009) Performance Of Levenberg-Marquardt Algorithm In Face Recognition. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norkhairunisah , Mohamad (2010) Hybrid Composite Using Recycle Plastic Bag. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norlezah, Hashim and Chairulsyah, Wasli and Abd Shukur, Ja'afar and Ahmad Sayuthi, Mohamad Shokri and Zulkifli, Shariff (2012) Development Of Fiber Optic Roughnes Measuring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norliana, Azhar (2015) 3D Reconstruction Using Silhouette Coherance For Image Acquisition Under Circular Motion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norshahira, Mohd Fauzi (2010) Study The Mechanical Properties On Biocomposites Of Kenaf Fibers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nortazi , Sanusi and Sharifah Sakinah, Syed Ahmad (2006) Numerical Methods & Statistics : The Integration Of Theory And Application For Engineering Students Towards Industrial Needs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norwahidah, Abd Wahid (2008) Mapping Corrosion Activities Of Various Type Of Acidic Solution In A Pipe Using Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norzamri, Siti Nor Iffah (2019) Underwater color correction. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norzaratul Ain , Ismail (2015) Study The Surface Roughness Of AISI 1045 Carbon Steel By Using Dry CnC Turning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur 'Afifah, Shaiful Bahrin (2015) Design Consideration Of Microheater Structure For Micro Devices Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Adila , Ibrahim (2009) Barcode Recognition System Using Image Processing. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Ainieyantie , Kamaruddin (2009) Assessment Of Whole Body Vibration Exposure Among Metal Stamping Operators. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aisyah , Abdul Aziz (2009) Verification Of Face Image System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Al Hafizuddin , Mohd Arabai (2013) Stamp forming behaviour of palm fiber composite. Project Report. UTeM, Melaka. (Submitted)

Nur Amarina, Mahmood (2015) The Effect Of Coupling Agent On The Mechanical Properties Of PLA-Based Polymer Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ameelia, Rosli (2015) Air And Fuel Flow Analysis Of A Single Cylinder Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aqilah, Ya'kob (2013) Synthesis And Characterization Of Light Weight Natural Foam From CSM Coconut Fiber Filled Polyurethane For Acoustic Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asyikin, Othman (2009) Energy Absorption Of Triangular Rings Subject To Transverse Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Atiqah, Ab Ghani (2009) Effect Of Process Parameters On The Mechanical Properties Of RSSP / PP Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farizan, Ayoob (2010) The Effect Of Sintering Temperature And Clay Addition Towards Glass Ceramic Produced From Recycle Glass By Using Pressing Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fazlina , Ahmad (2009) Penyediaan Larutan Bahan Punar Bagi Aloi-Aloi Bukan Ferus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hazirah, Ismail (2015) Shape Based Matching Gluing Defect Using Gaussian Filtering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hidayah , Seth (2009) Infrared Cane For The Blind People. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Hizzuanna, Hazizan (2015) A Study On Machining Strategies For Pocketing Profiles Outward Helical, Offset On Part One Way And Offset On Part Zigzag. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ilmi , Mohamad Roslan (2013) A Non-Destructive Test Crack Detection Method Using Vibration Acoustic On Aluminium Plate. Project Report. UTeM, Melaka. (Submitted)

Nur Liyana, Mohd Daud (2014) The influence of bentonite on glass waste filled spent bleaching earth (SBE) composite. Project Report. UTeM. (Submitted)

Nur Muhamad, Fariq Anugrawan (2023) Integration of computer vision and motion control for sorting robots with IoT integration. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nur Nabilah, Mamat (2015) Influencing Factors The Awareness & Practice Of Green Technology At Flextronics Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Saaidah, Abu Bakar (2008) Study Of Cooling Water System (Closed Loop) At Hydroelectric Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syaheera, Ahmad (2013) Ergonomic Design Of Computer Numerical Control Milling Machine Using Quality Function Deployment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur-Ahmad, Mazlan (2009) Electromagnetic Power Plant Base On Perendev Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuradila , Harun (2013) Analysis Of Wave Amplitude Modulation Effect For Various Crack Lengths In Vibro Acoustic Inspection Method Simulation Approach. Project Report. UTeM, Melaka. (Submitted)

Nuraini , Abd Latif (2013) Ergonomics Design Of Baby Carrier. Project Report. UTeM, Melaka. (Submitted)

Nurazlina , Ibrahim (2010) Preliminary Study And Measurement Of Cutting Tool Coating Thickness By Using Alpha Thickness Gauging Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurbaitie Imana, Abdul Rashid (2011) Hu Invariant Moment For Static And Non Static Movement (HIMM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurdin, Muhammad Nasruddin (2019) Vibration analysis of BCC lattice structure materials using finite element method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nurfaizey , Abdul Hamid and Muhd Ridzuan , Mansor and Mohd Zaid , Akop and Mohd Afzanizam, Mohd Rosli (2009) An experimental study of the influence of fiber architecture on the strength of polymer composite material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhafiza , Fadzil (2011) Development Of Portable Ceramic Gas Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhernida, Abdullah Sani (2011) Synthetic Hybrid Laminate Composite By Using Polyester Via VIP For Hardboard Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuroddin, Norfaizal (2018) Development and analysis of biodegradable product from pineapple leaf fibre. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nurul Asyilah, Zakaria (2015) Application Of Plastic Bottle Waste On Lightweight Composite Structure Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ayunni, Abdul Latif (2010) Production And Characterization Of Enviro-Recycled Wood Plastic Composites (ER-WPC) For The Structural Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Azimah , Ahmad Arzaai (2008) Pemanas Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Azwa, Abdul Rahman (2009) Damage Initiation And Propagation In Composite Materials Subjected To Tensile And Compression Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Farahizzati, Zakaria (2015) Design Of Shielded Metal Arc Welding (SMAW) Workstation For Safe Posture And Weld Quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Farhana Izzati, Mohamad Nazri (2015) Effect Of Yeast Content As Foaming Agent On The Mechanical Properties Of Titanium Foam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Fariha , Othman (2010) Potential Application Of Tapioca Starch/Sugar Cane Fiber Cellulose Green Composite For Disposable Packaging Food Container. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Fateen , Shukarnu (2007) Investigation Of Maximum Stress On Carbon Fiber Laminate Composite With Hole Using Finite Element Analysis (FEA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Fazliyani , Rusli (2009) Velocity Measurement Of Flowing Object Using Infrared Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurul Hafidzah, Rosli (2009) The Effect Of Probe Frequency In Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hana, Md Zuki (2015) Investigation Of Corrosion Rate Of SS316 Plate Inside An Alkaline Electrolyzer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Jannah, Baharudin (2015) Analisis Terhadap Faktor-faktor Yang Memberi Kesan Kepada Kebolehtelapan Struktur Sel Semulajadi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Mardhiah, Mohd Azizuddin (2010) An Investigation Of The Effect Of Retrogression And Reaging (RRA) Treatment On Stress Corrosion Cracking (SCC) Of Aluminum Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Syaffinaz, Muttakal (2013) The Acoustic Treatment & Speech Intelligibility Quality Analysis Of Masjid UTeM Using Advance Tool Simulation And Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Zawani, Hambali (2008) Design, Development And Analysis Of Body Profile For Ballistic Armour Mould Using Reverse Engineering Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhazwani, Jamalludin (2010) Fruit Recognition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhilmi, Zaiedah Nasir (2011) Development Of Lightweight Porous Concrete As Wall Insulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhuda, Mostafa (2013) The Effect Of Spent Bleach Earth (SBE) WT %On The Physical And Mechanical Properties Of Sintered Glass Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nus, Mohd Shaiful Azri (2016) Optimization Performance Of Fiber Optic Sensor On Semi-Synthetic Test Oil For Engine Traditionally Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Oh, Kok Ken (2016) Aerial Monitoring On Mango Using Machine Vision Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Bapokutty (2014) Composite Hinge Spoiler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Muhammad Azim (2019) Preparation And Characterization Of PANI / GNPs Nanocomposites For Flexible Wearable Textile Antenna Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Muhammad Hafiz (2017) Automatic distance measurement device using stereo vision technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Omar, Nurul Ashiqin (2019) Density Characterizations Of Organic Solvents By An Optical Technique. Project Report. UTeM, Melaka. (Submitted)

Ong, Xiong Hui (2017) The Saw Dust Filled Tube Under Axial Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi, Pui Yin (2016) Study The Properties Of Ti-6A1-4V After The Gas Nitriding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi , Zhuen Hong (2007) Environmental Ergonomics At Highway Toll Booth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi, , Su Guan (2013) Effect of gold treatment on the mechanical properties of 316L stainless steel. Project Report. UTeM, Melaka. (Submitted)

Osman, Anwar Farid (2018) Tribological performance of waste slurry powder reinforced (polypropylene) using pin on disk tribometer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Osnan Najib, Muhamad Fahrul Razzi (2017) The Development Of Bioplastic Product From Banana Fiber For Food Packaging. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Othaman, Anis Nabihan (2017) Formulation of polymeric binder system in urea fertilizer containing biodegradable PVA and starch. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Othman, Muhammad Syah Akhimullah (2015) Analysis On Effect Of Kenaf Fiber Towards Impact Characteristic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Muhammad Zafri Ariffin (2018) Study of combined load on the buckling behaviour of cone-cylinder transition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Othman , Intan Sharhida and Ahmad, Muhamad Khaizaki and Zainal Abidin, Muhammad Zaimi and Mohamad Juoi, Jariah and Mohd.Rosli, Zulkifli and Mohamad, Noraiham and Mohd. Abid, Mohd. Asyadi Azam (2018) Effect Of Current Density And Heat Treatment On The Characteristic, Wear Resistance And Adhesion Of Nickel Nanocrystalline Coatings Deposited On Aluminum Alloy 7075 Substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Othman Ahmed, Talal Mahmood (2018) Improving the fatigue life of fastener holes by using cold expansion technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

P

Peshwinder Singh, Harjit Singh (2013) Acoustic Performance Of Sandwich Skin For Acoustic Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Phua, Hou Jie (2020) Effect of carbon black loading on the properties of graphite – Epoxy composite for flow channel fabrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Phung, Lee Mun (2013) Combine Infrared Lock-In Thermography And Curve Tracer Into An Integrated System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pilvamangalam, Nisallini (2017) A Study On Quasi Static Indentation Behaviour Of Kenaf Bast Fibre Reinforced Metal Laminate System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Po, Dolly Jim Ming (2019) Investigation of the length over diameter ratio of tandem pipe by computational fluid dynamics method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ponaseran, P.S.Giritharan (2018) Real-time video road sign detection and tracking using image processing and autonomous car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Poo, Wei Sheng (2018) Additive manufacturing of natural fibre reinforced thermoplastic composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Prasath, Rajandhiran (2008) Investigation On Mechanical Properties Of Stainless Steel 304-Stannum Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pua, Rui Si (2018) Reinforcement benefits of natural fiber in lime-treated asphalt based damping material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Puteri Suriyani, Megat Wazir and Ahmad Fauzan, Kadmin and Hamzah Asyrani, Sulaiman and Mohd Saad, Hamid and Shamsul Fakhar, Abd Gani and Norhidayah, Mohamad Yatim (2011) Blood Cell Recognition System Using Recursive Least Square Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Q

Quah, Swee Liin (2018) Performance Analysis Of A Visual Saliency-Guided Model For Blind Image Quality Assessment (VBIQA). Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Quek, Yu Xuan (2024) File organiser software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Qurratu' Aini, Yaacob (2015) The Effect Of Dispersion On The Mechanical Properties Of PLA-Based Polymer Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Rabiatul Adibah , Abdul Rahim (2010) Design And Analysis Of Autoclave Mould For Carbon Reinforced Spoiler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafeek Ahmad, Mohamed Asyraf (2008) Fabrication And Characterization Of Rubber Seed Shell Powder (RSSP) Filled Polypropylene (PP) Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafidah, Mohamad Noor (2008) Imaging Concentration Profile Of Flowing Particles Using Combination Of Infra Red Emitter And Photoelectric Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafidah , Hasan and Omar, Bapokutty and Fatimah Al-Zahrah, Mohd Sa'at (2008) Fatigue And Fracture Investigation On Surface Hardened Metals. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafiha , Ranom and Alias , Khamis and Zulkifli , Ibrahim and Asri , Din and Mohd Norhisham , Che Soh and Mohd Rizuan , Baharon (2011) Numerical Analysis-Based : Visualization Technique Of Heat Distribution And Dissipation In Current-Carrying Conductors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ragu, Renuka (2020) Parameter optimization of kenaf core for heat insulation application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rahim, Norhuzaifi (2017) Experimental Investigation Of Energy Absorption Capacity Of Mild Steel Cylinder Subjected To Axial Crushing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahmah Iznillah , Abd.Malik (2010) 10 Way Infra Red Remote Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raihana, Ramle (2009) Corrosion Rate Of Aluminum Alloy By Anodizing With Emphasis On Body Panel Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Afiq Al-Hakimi, Raja Tajuddin (2015) An Assessement Of Cylinder Deactivation Implementation Using A Race Sytyle Exhaust Manifold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Izhar Azuan, Raja Izam (2008) Kajian Kesan Suhu Terhadap Keluli Lembut Pada Daya Serenjang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Manisa, Raja Mamat (2009) Effects Of Maleated Polyphropylene (MAPP) On The Mechanical Properties Of Rubber Seed Shell Powder (RSSP)/Polypropylene (PP) Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rajasegaran, Sobanraj (2020) Response of fibre metal laminate under low velocity impact. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramalingam, Thineskumar (2017) Investigation Of Energy Absorption Capacity Of Mild Steel Cylinder Subjected To Lateral Crushing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramaneshwaran, Baskaran (2011) Development Of Fibre Optic Roughness Measuring System Using Time Of Flight Method (TOF). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramiza , Mohd Yunus (2008) Development Of Algorithm Of Classification Between Human And Non-Human. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ramlan, Rohaizah (2019) Fault Detection And Diagnosis Of Air-Conditioning System Using Convolutional Neural Network. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramli, Bizora (2016) Topology Optimization Of Mold Base Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli, Muhammad Rusydan (2021) Effect of pineapple leaf on the properties of pineapple leaf fibre/thermoplastic sago starch composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramli, Muhammad Syafiq (2020) Characterization of a polymer optical microring resonator filtering function for optical communication applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rashidah, Ismail (2008) Quenching-Tempering Effects On Hardness And Compression Strength Of Carburized Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rasidin, Senawi (2008) Low Velocity Impact Behaviour Of Advanced Composite Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ravichandran, Vaseetha (2021) Influence of hydrothermal ageing on the mechanical properties of a wood polymer composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Razak, Muhammad Shahmi (2016) Flexural test on virgin and recycled HDPE specimen. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Razak, Noorshahirah (2018) Effect of rice husk ash on natural rubber compound as green filler. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Razali, Intan Farah Najihah (2018) Design and fabrication of bed chair with front rest for chronic patient. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Razali, Muhamad Farid (2017) Effect Of Layer Thickness And Raster Angle On Tensile Properties Of Carbon Fiber Reinforced ABS Printed Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Muhammad Fitri (2017) Vibration Isolation Of A Rotating Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razid, Nor Atirah (2019) Effect Of Surface Treatment On Pineapple Leaf Fibre (PALF) And Its Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raziman , Ramli (2009) Study On The Laminar Pulsed Flow In Microchannel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Reza Assad, Zakaria (2009) Kajian Perubahan Bentuk Plastik Terhadap Daya Lenturan Melalui Kaedah Ujikaji. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ridzuan, Jaham (2012) Merekabentuk Dan Fabrikasi Radas Eksperimen Statik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rofii, Nursahira (2018) Thermal Insulation Material Made From Kenaf Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohizat, Nursyafika (2015) Influence of suspension preparation condition and medium microstructure and phase of electrophoretic deposited poly (vinylidene fluoride) films. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rojani, Mohd Syahmi (2017) Structural Design And Analysis Of Main Tank For River Trash Collector System (RTCS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Romzei, Norshazlina (2024) Effect of secondary amine concentration on dielectric property of epoxy coating deposited by electrophoretic deposition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ros Azura, Mohsin (2007) Fatigue Study On Metal Using Tensile Load. Project Report. UTeM, Melaka. (Submitted)

Rosdi, Rafi'uddin (2016) Development Walking Stick With Heart Attack Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosdiadi, Ramli (2005) Reverse Engineering Of A Container Product Of A Plastic Injection Molding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosdie, Mohd Said (2019) Corrosion Behaviour Of Mild Steel Coated With Epoxy-PANi-Phosphorus Thin Film In 3.5 WT Percent NaCl Solution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roshazira, Ahmad (2009) Attendance Management System Using Fingerprint Scanner. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Roslan, Idham Haziq (2019) Development Of Hockey Training Kit For Hockey Training. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Muhammad Hakimi (2024) Analysis of scattering effect on ZnO nanorods coated glass substrate towards humidity. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roslan, Muhammad Haziq Ilham (2017) The Investigation Of Lightweight Brick Made From Rice Husk. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roslan, Nurul Najwa (2017) Investigation Of Heat Flow Characteristic In An Industril Oven Using ANSYS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Mohamad Fadhli Iqbal (2019) Manipulation of Kuka youbot with hand-motion using webcam and marker detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Muhammad Akmal Daniel (2023) Mechanical properties of hybrid composite consist of wood dust, copper wire and reinforced with polyester resin. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roslin, Muhammad Iqmal Hakim (2023) The design and development of a pineapple planter machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosliza, Ismail (2009) Feasibility Study On Mechanical Properties Of Various Vacuum Casting Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosnan, Nur Syahirah (2017) Preparation and characterization of cellulose nanocrystals (CNC) from kenaf fiber via acid hydrolysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rozali, Fatin Nadhirah (2018) Characterization of indium zinc oxide coating on kenaf fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rozali, Muhammad Asyraf (2019) A study on new material of storage table fabricate from bio composite (Coconut Fiber) based. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rozeana, Abd Rahman (2010) Vision System Based Height Measuring Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roziman, Annisa Aishah (2024) Water absorption for insulation board made from cigarette butts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rozita , Salehudin (2007) Pengukuran Aliran Bendalir Menggunakan Venturi Meter Dengan Kaedah Eksperimen Dan Simulasi CFX. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozlan, Muhamad Irfan Asyraf (2023) Development and characterization on mechanical of pineapple leaf fibre reinforced thermoplastics sago starch composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rudy , Majid (2013) The Effect Of Applied Stress On Heat Treated Aluminum Alloys 7075 In DC Corrosion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruslan, Nurul Farzlina (2017) Material Selection Of Natural Fiber Metal Laminate For Automotive Body Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rustam, Ramli (2008) Vibration - Free Positioning Of Flexible Systems Using Impulse Shaping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruzhani, Nurfatin Dalila (2021) Application of hybrid coconut/kenaf fibre reinforced with polypropylene composites for automotives components. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S

S.Shasitharan, Geveganesh (2024) A study on impact of different flooring types to thermal comfort in buildings. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sa'ad, Nur Syafini (2015) Formation of iron oxide nanowires by using thermal oxidation of iron. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sa'aya, Nurul Afiqah (2016) The Residue Of Oil Palm (Empty Fruit Bunch) As Fiber Reinforcement With The Comparison Between Epoxy And Polyester As Matrix In Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saafuan Ali, Tukiran (2015) Design And Simulation Of Guided Wave Transmitter For Inspection On Concrete Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saari, Mohamad Fikri Salehudin (2017) Comparison Between Tensile Properties And Fatigue Behaviour Of NR-EPDM Blend And Its Nanocomposites For Potential Application In Engine Mounting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sabri, Nur Hasrin (2014) Ergonomic design of computer numerical control lathe machine workstation. Project Report. Melaka, Malaysia, Melaka, Malaysia. (Submitted)

Saharuddin, Muhammad Zariq Izwan (2017) Developing Recycling Machine For Botlle Plastic With Reward By Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saharuddin, Nurul Syaza Izzaty (2019) A study on mechanical, physical, and environment properties on thermoplastics cornstarch composite reinforced by untreated pineapple leaf fibre using hybrid method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saharudin, Muhammad Muzakkir Asyraf (2024) Assessing compressive strength and dimensional stability of detachable green concrete tiles for flooring applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sahatim, Nurshuhadah (2018) Corrosion behaviour of mild steel coated with epoxy-zinc oxide nanoparticles film in 3.5% WT NaCl solution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sahrani, Muhamad Firdaus (2019) Effect of carbon black loading on the properties of graphite- epoxy composite for bipolar plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sahrir, Ahmad Zuhdi (2020) Friction Behavior Analysis In Surface Roughness For Machine Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saidah, Mohamad Aminallah (2013) Characterization Of Hydroxyapatite Coating Deposited On Glass, Stainless Steel And Titanium Alloy Substrate Via Sol-Gel Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saidah , Khalid (2007) Analysis Of Working Posture Of Operator In Mixing Department Of An SMI In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saidin, Nur Hidayah (2017) Application Of Palm Oil Fiber-PP Composite For Fabrication On Interior Part Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saiffuddin, Puteri Nadiah (2018) Study The Effect Of Nanoclay On Poly (Lactic Acid) And Polybutylene Succinate As Matrix For Pineapple Leaf Fibre Based Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salim, Nurul Arina (2016) Design And Analyze Of Application Of Optical Amplifier In Submarine Fiber Optic Cable Communication Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salleh, Effi Nur Shazleen (2019) Effect Of Matrix Ductility On The Properties Of Pineapple Leaf Fibre Reinforced Poly Lactic Acid Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salleh, Mohamad Izzat (2023) Characterization and mechanical properties of porous ceramics with different mixture of carbon black (CB) and polymethyl metacrylate (PMMA) contents. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Salleh, Mohd Shukor and Subramanian, Sivarao and Md Ali, Mohd Amran and Zakaria, Kamarul Ariffin and Mohamad kamal, Mohamad Ridzuan (2018) Microstructural Characterization And Mechanical Properties Of Al-Si-Cu Alloys Processed By Cooling Slope Casting And Equal Channel Angular Pressing (ECAP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salleh, Mohd Shukor and Subramonian, Sivarao and Omar, Mohd Zaidi and Md Ali, Mohd Amran and Abd Rahman, Md Nizam and Zakaria, Kamarul Ariffin (2018) The Effect Of New Heat Treatments Cycle On Microstructure And Mechanical Properties Of Semi-Solid Forming Aluminium Alloys. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sally, Yeoh Sheue Ling (2008) Ergonomics Safety Approach In Welding Shop (A Case Study In UTeM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sam, Weng Yik (2011) Implementation Of New Cross Diamond Search (NCDS) Algorithm For Motion Estimation Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samad, Nur Fadhilah (2018) Manufacturing selection for natural fibre composite automotive component. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samad Fatimi, Farah Ezlin (2016) The Study Of Conversion Unit From Pixel To A Distance Measurement Acquired By Vision System Using Matlab Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samin, Nor Syamilah (2014) The evaluation of non-stochastic lattice structure on drop test application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsuddin, Nur Shazwani (2016) Preliminary Study On Elasticity Profile Of Kenaf Fiber And Polyester Resin As Composite Fiber Substitution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsudin, Muhammad Syazwan Nizam (2017) Effect of silane based functionalization on thermal and electrical properties of nanographene/nylon 6,6 composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsudin, Nur Alina (2016) Analysis on human factor for manual handling worker and design for improvement of table workstation in manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsudin, Nurul Syahira (2019) Classification Abnormalities Of Eyes Using Bag Of Features For Medical Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsudin, Puteri Nurul Syaza Syahirah (2018) Ultrasonic assisted 3D printing to improve printed parts surface finish. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsudin, Shahrizal (2017) Effect of suspension's ionic conductivity on electrophoretic deposition of h-BN. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samuel, Tang Kah Hung (2010) Literature Study On Impact Energy Absorption (IEA) Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sandy, Samuel Ethen (2024) Effect of fly ash content on microstructre and, echanical properties of aluminium matrix composite processed by cooling slope casting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sangar Raj, Saravanan (2022) Stress intensity factor investigation on crack simple I-beam using finite element analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sapani, Fatin Munirah (2016) An Investigation On External Corrosion Of Tempered Dual Phase Steel Welded Plate In NaCI Solutions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sapani @ Azhar, Norshafiyanarina (2016) Bees algorithm inspired by grenade explosion method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sapari, Nur Fashiha (2015) Carbon filled glass ceramic: from waste to wealth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sarah Nadiah , Abdul Halim (2008) Effect Of Re-Solution Heat Treatment Time On The Impact Of An Aluminum Alloy For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sariansa, Santie (2008) Kajian Kelesuan Logam Berkarbon Rendah Melalui Penyusukkarbonan Dan Tanpa Penyusukkarbonan Menggunakan Beban Regangan Dan Mampatan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarifuddin, Mohd Amirullah (2015) Springback Effect On Various Thickness Of Mild Steel, Stainless Steel And Aluminium Sheet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarini , Ramli (2007) Assessment Of Working Posture In Manufacturing Industry Using Rula Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sark, Li Lian (2007) Digital Altimeter Based On PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarman, Nurhuda (2024) Mechanical properties of glass fiber pineapple leaf reinforced polyester hybrid composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sasidaran, Shamalan (2022) Friction and wear-characteristics of base oil derived from re-refined waste oil enhanced with MoS2 nano particle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sazali, Amir Hafiz (2019) Investigation of the buckling behaviour of cone-cylinder transition with dimple imperfection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sazrinah , Mahamad Gaos (2006) Development Of Honeycomb Structure With Aluminium Skin For Light Weight Structural Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Seah, Mei Yin (2018) The Development Of Object Measuring System Using Image Processing Technique. Project Report. UTeM, Melaka. (Submitted)

Sean , John Mathew (2013) Modeling And Optimization The Effects Of Process Variables On Mechanical Properties Of AL-6061 T6 Robotic CO2 Weldments. Project Report. UTeM, Melaka. (Submitted)

See, Li Xin (2018) Yield improvements in semiconductor manufacturing using TRIZ methodology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Selamat, Aida Nazurah (2021) Numerical study of the blood flow in aortic aneurysm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Selvadurai, Vignesh (2024) “Real-time automatic number plate recognition system usingdeep learning approach”. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shaari, Muhamad Hariez (2023) Characterization and mechanical properties of tin dioxide reinforced natural rubber for electrical insulators. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shafawi, Shafei (2008) Merekabentuk Peralatan Momen Lenturan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shafei, Siti Azian (2016) Fabrication Of Green Polymeric Tiles From Polypropylene And Tapioca Starch Compound. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shafi'e, Muhammad Yusri (2017) Tool performance of uncoated tungsten carbide insert during turning Ti-6AI-4V under dry and nanofluid condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shafie, Azhar (2017) Implementation Of Automation Process In Generating CAD Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaharani, Muhammad Syamil (2017) Nanofibre Incoprated Face Mask For Haze Protection Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahida, Remle (2015) A Study Of Surface Roughness Of Aisi 1045 Carbon Steel By Using Wet CnC Turning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahirul Aini , Kamarul Khisham (2009) CMM’s Styli Length Effect On Error Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrulzaman, Shazmin (2024) Development and analysis of kenaf core concrete for acoustical and mechanical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shaidan, Muhammad Syahir (2016) Unsupervised learning: K-Means approach in classifying human walking path. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shaifatul Shima, Shaari (2010) Analysis On Bicycle Crank Arm Using Tensile Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shakri, Muhammad Amin Izzat (2024) Effect of powder metallurgy copper electrode on surface modification of mild steel. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Shamsudin, Shamsul Anuar and Rivai, Ahmad and Abdullah, Zulkeflee and Ismail, Mohammad Hazrin and Mohd Hanafi, Mohd Hafidzal and Karjanto, Juffrizal and Zawawi, Nur Juliana (2016) Design, Fabrication And Analysis Of A Novel Morphing Wing Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsul Fakhar, Abd Gani (2013) Development Of Stereo Vision Sensor And Distance Estimation For Computer Vision Application (DE-CV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsul Nizam, Nur Amira (2017) Surface Fracture Mode Analysis Of FRP Composite Pipe By Microscopic Technique. Project Report. UTeM, Melaka. (Submitted)

Shanmugam, Tinish (2023) Investigation of mechanical and physical properties of concrete brick made of waste materials. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sharifah Zafirah, Syed Zainal Abidin (2013) Transparent Conductive Carbon Nanotubes / Binder Hybrid Thin Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharifah Zafirah, Syed Zainal Abidin (2014) Transparent Conductive Carbon Nanotubes/Binder Hybrid Thin Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shariff, Anis Sabirah (2019) The study of flank wear using uncoated boron steel (22MnB5) on aluminium (AA6061). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sharifudin, Amirul Izzuddin (2022) Acoustic emission analysis for internal valve leaks in gas and liquid pipelines. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sharum, Mohamad Afiq (2023) Investigation of dimensional accuracy of additive manufactured sample. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sharum, Aisyah (2015) Tailor orbital welding on aluminium alloy 6063. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shazreena , Samat (2013) Effect of heat treatment on the microstructure and mechanical properties of low carbon steel. Project Report. UTeM, Melaka. (Submitted)

Sheda Akmaniza, Ibris (2008) Kajian Terhadap Kesan Perbezaan Resin Ke Atas Komposit Laminat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shim, Fiona May Fa (2015) Fabrication and mechanical analysis of spent tea leaf materials for sound absorption. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shuharzi , Md Salleh (2007) Merekabentuk Dan Membentuk JIGS Untuk Ujian Ricih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sii, Hee Hing (2018) Electrodeposition of binary nickel-chromium (Ni-Cr) alloy on aluminium 1000 series substrate in organic solvent. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sindam, Dorestey (2022) FTIR and porosity analysis of the humidity-exposed PLA-TPU filaments in additive manufacturing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Singh, Vishaldeep Tar (2018) Mechanical Properties Of Coconut Shell In Reinforced Polymer Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sinjus, Hana Risthywillyen (2018) Development Of Health Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sirinjeev Rao, Raman (2013) Design Of Casting Mold For Natural Fiber – Metal Matrix Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Afizah , Mohd Ali Hanafiah (2006) The Direct Reading Of Ultrasound Distance Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aminah, Mohd Subari (2010) Study On Shock Absorbing Properties Of Aluminium Circular Tube. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Dhamirah 'Izzati, Damni (2011) The Face Recognition System By Using The Radial Basis Function Neural Network (RBFNN). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Eaisyah , Kamaruzaman (2009) New Packaging Material By Using Mechanical Retting Kenaf As A Natural Filler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Faizah , Mad Asasaari (2010) Effect Of Chromium Carbide (Cr23C6) Formation On Microstructure And Corrosion Passivity Behavior Of AISI 304 Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Fatimah, Baba (2012) Face Recognition Development Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hajar, Raman (2012) Fish Camkit Improvement for Fisheries Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hanafiah , Juddin (2008) Infra Red (IR) Based Tomography System : A Comparison Between Orthogonal And Fan Beam Projection. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Haryani, Harun (2009) Buckling Behavior Of Laminates Composite Under Compressive Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hasmah, Mohd Salleh (2014) Development Of Microwave Imaging Technique Using Synthetic Aperture Radar For Early Cancer Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hawa, Zainal (2014) Investigation Of Lightning Distribution Using LIS Data From TRMM Satellite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nooraishah , Elies (2013) Preliminary Investigation Of Plastics Joining Process. Project Report. UTeM, Melaka. (Submitted)

Siti Nur Azreen, Ayub (2015) The Effect Of Fibre Type, Size, And Fibre Architecture On The Mechanical Properties Of Bio Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Rafidah , Mamat (2007) Reverse Engineering Of Pharmaceutical Bottlepack Cap By Plastic Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Rahmah , Mohd Hassan (2009) Analysis Of Medical Imaging Using Digital Image Processing. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Rohani, Shafie (2009) Fabrication Of Kenaf Fiber Reinforced Polyester Composite By Using Vacuum Infusion Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Sakinah Munirah, Ishak (2013) A Study Of Sunflower Oil Performance As A Gear Lubricant. Project Report. UTeM, Melaka. (Submitted)

Siti Salwany, Abu Hasan (2010) Effect Of Risk Husk Reinforcement To The Properties Of Polyester Bio Composite For Roofing Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Umi Hani, Mohamed (2009) Design And Analysis Of Long Cylindrical Workpiece Fixture Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Wannorhassliza, Wan Hassan (2013) Characteristics Of Hydroxyapatite Sol-Gel Coating Of Stainless Steel In Hank’s Solution And Sodium Chloride Medium. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siva Subramaniam, Siveneswari (2019) Development Of IoT Based Patient Health Monitoring Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivaji, Kushallini (2019) Optimization Of Fiber Optic Using Sensing Applications Using Taguchi Approach. Project Report. UTeM, Melaka. (Submitted)

Sivakumar, Dhar Malingam and Mohd Radzai , Said and Ahmad , Rivai and Tan , Chee Fai (2007) Buckling Behaviour Of Shallow Vee Section Beams. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivakumar, Dhar Malingam and Ahmad, Rivai and Sivarao, Subramonian and Mohd. Zulkefli, Selamat and Mohd Nur Azmi, Nordin (2012) Stamp Forming Performance Of Palm Fiber Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sofian, Muhamad Fitri (2018) Application Of Kenaf Fiber-PP Composite For Fabrication On Interior Part Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Soh, Shi Ling (2019) Development Of Ankle Orthosis For Ankle Injury Prevention. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Soon, Wei Jun (2016) Object Recognition Using Bows Model. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Sri Vanitha Mathy, Sedu Badi (2011) Omni-Directional Hexapod Vehicle For Uneven Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Stephen , Rachel Karen (2009) Analisis Kegagalan Pada Struktur Kerusi Kegunaan Pelajar Di Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Subramaniam, Mugilarasan (2023) Validation of stress concentration factor in perforated plates using finite element software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Subramaniam, Shathis Kumar (2016) Intelligent Image Capturing Alarm System To Protect Your Locker Using Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sue, Chen Xiang (2023) Imagegenie: A magic wand for images using deep learning. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Sufian, Mohamed Nor (2007) Development Of Coconut Shell Powder Reinforced HDPE Composites. Project Report. UTeM, Melaka. (Submitted)

Sufian Sauri , Ahmad (2007) Sistem Penggera Pengesan Inframerah Pasif. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhada, Mohammed Sapardi (2009) Performance Of Resilient Backpropagation Algorithm In Face Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhaimi, Muhammad Amir Afiq (2017) Investigation of sitting posture in classroom environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suhaimi, Nur Nabillah Aula (2021) Effect of temperature on the electrical properties of epoxidized natural rubber based nanocomposites for electrical insulation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sukrulnizam , Ismail (2010) PIC Based Fiber Optic Pressure Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulaiman, Mohd Ghazali Kadir (2014) Fatigue life prediction model for fiber reinforced polymer composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sulayan, Nur Syafiqah (2020) The mechanical properties of paady-husk polypropylyenecomposite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sumaidy, Eliyana Sari (2015) Ergonomic design approach to enhance the labor productivity in manufacturing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sumaiyah, Abdul Latiff (2013) Applying A Crisp And Fuzzy Analytic Hierarchy Process Method For Spatial Multi-Criteria Decision Analysis [Case Study : Spectacles Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sures, Nagavalli (2024) Development of optical microfiber sensor for liquid concentration detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suriatie , Ghazali (2009) The Study Of Square Plate Under Compression Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suzie Haslinda, Musa (2011) Low Back Pain Analysis In Aluminium Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syahriful, Rizky Sultansyah (2016) Study On Corrosion Rate Of The Zinc Anode From Outboard Boat Engine Around Straits Of Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syaidatul Huzaliza , Shamsudin (2015) Walking stick embedded with wireless earphone. Project Report. UTeM. (Submitted)

Syamimi Wahidah, Ahmad Nizar (2015) Fiber Optic Sensor (FOS) For Ethanol Detection And Optimization Performance Using Analysis Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syamsul Baharin , Husain (2008) Infrared Distance/Height Measurement. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Syarifah Mahani , Mohd Nazri (2008) A Study On 3D Modeling Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syarifah Noorashiqah, Syed Mohd Zainol (2009) Study The Mechanical Properties And Morphology Of Glass-Carbon Fiber Reinforcement/Polyethylene (PE) Hybrid Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syawal, Symsul (2015) Kesan Gentian Kaca Ke Atas Polipropilena (PP) Sebagai Bahan Geseran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazana Itqan, Khalid (2015) Developing A Face Recognition System Using Convolutional Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazwan , Zainuddin (2013) Fluid flow characteristic in curved tube heat exchanger by numerical method. Project Report. UTem, Melaka. (Submitted)

Syed Amir Redha, Syed Mohmad (2011) Laser Range Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Hamzah, Syed Othman (2008) Quasi-Static Indentation Force On Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Hashim, Syed Moksin (2008) Study On The Strength And Mechanical Properties Of Bio-Composite Of Maize Stamp Fiber Sandwich Matrix With Resin/Polymer For Shield Ballistic Armor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Jamil Rusydi, Syed Baharom (2007) Mechanical Characterization Of Polymer Matrix Composite (Low Density Polyethylene With Rubber). Project Report. UTeM, Melaka. (Submitted)

Syed Muhammad Hazwan, Sayed Ali (2013) Mechanical Behavior & Water Absorption Of Metal Matrix Composite (Tin+Rice Husk) Fabricated Via Permanent Mould Casting (Experiment With 5% WT And 15% WT Rice Husk). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syuhadah, Zainal Abidin (2007) Effects Of Carburizing On Mechanical Properties Of Low Alloy Steel. Project Report. UTeM, Melaka. (Submitted)

T

T. Joseph, Sahaya Anand and Sivarao, Subramonian (2011) Improve The Mechanical Properties Of Intermetallic Aluminides For Automotive Body Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T.Mhd Arifin, Tengku Ahmad Salahudin (2019) Design and development an ergonomic hand wrist support for computer mouse user. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tai, Xin Yee (2018) Study on mechanical properties and microstructure behavior of aluminium alloy 6061. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tainsing, Josua (2015) Vibration Control Of A Coupled Cylinder Under Rotational Motion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tajudin, Muhammad Hafizin Arif (2022) Correlation of Charpy impact between welded and unwelded material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tamat, Mohamad Naim (2017) Development of internal pipe system inspection mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Kevin Chan Khoon (2008) Fabrication Of Polymer Composites For Use As Jigs And Racks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Kien Guan (2012) A Thermal Heated Lunch Box. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Shan Shan (2013) Hard Disk Drive Serial Number Recording And Inventory System Using Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Teng Teng (2012) Mechanical And Physical Properties Of Sandwich Structures Made From Chopped Strand Mat Coconut Fiber Filled With Polyurethane Foam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Chee Wei (2020) Push And Pull Force Analysis For Designing Manual Operated Industrial Trolley. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Hao Yan (2018) Design Of Surgical Lighting System Using Image Processing Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Jia Wei (2020) Conceptual design of the crutches using triz-biomimetics method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Joe Yee (2019) The Effect Of Lateral Lifting Tasks On Hand Grip And Pinch Strength Measurements. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Jun Hao (2018) Effect of spinning rate and sintering temperature of TiO2 sol-gel via spin coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Kien Hau (2024) Analysis of Si3N4 based micro ring resonator filter design using Taguchi Method for WDM application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Kok Sian (2018) Predicting crack location in plate using nonlinear vibro-acoustics method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Rui Jie (2020) Research on development of composite deck for electric vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Shea Ching (2021) Lightning analysis of a thunderstorm associated with lightning flashes in Malacca. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Xin Mei (2011) Analysis On Optical Waveguide (Free Space Optics) Via Beam Propagation Method (BPM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Zi Hao (2017) Examination Of Buckling Behaviour Of Axially Compressed Cylinder With Uneven Length. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tang, Soon Heng (2016) Flow Process Measurement And Control Using PID Control Scheme. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufik, . and Shajahan, Maidin (2008) Design Improvement Of An Automotive Part Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufik, . and Tahul Ariffin, Abdullah (2010) Design and Analysis of Production Tooling for Metal Matrix Composite by Investment Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tay, Shin Yoon (2010) Effect Of Different Heat Sensitization Temperature On Type 304 Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tay, Shin Yoon (2010) Effect of Different Heat Sensitization Temperature On Type 304 Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Chin Wee (2012) Experimental and analytical investigation torsional behavior of sigma profile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Kok Chen (2016) Structural characterization of Tungsten Sulphoselenides (WSSe) thin films for semiconductor application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tee, Kuo Chun (2023) Study on microstructure and mechanical properties of quenching AZ31B in nano-fluid. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tee, Wei Sen (2016) Robotic Arm Controller Design For Capturing The Sequential Images Surrounding The Object. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teh, Chee Khoon (2015) The Effect Of Carbon Nanotube On The Properties Of Graphite, Carbon Black And Epoxy Composite For The Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teng, Kuan Hui (2013) Experimental study of the behaviour of baphasic materials. Project Report. UTeM, Melaka. (Submitted)

Tengku Asmazatul Adawiah, Tengku Abdul Kadir (2015) Effect Of Binder And Fillers Ratio On The Properties Of Graphite/Carbon Black/Epoxy Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Nurul Izatulshima, T. Mohd Hashim (2009) Penyediaan Larutan Bahan Punar Untuk Aloi-Aloi Ferus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Janzen Wee Hui (2024) Optimization of d-shape optical fiber structures with a low insertion loss. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teo, Kah Chun (2017) The Solid Wood Filled Tube Under Axial Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Termiti, Zarif Hasif (2019) Mechanical properties investigation on PLA and ABS materials for geospatial topology product printed by rapid prototyping method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tew, Huei Theng (2016) Preparation and charaterization of kenaf fiber reinforced MWCNTS-Epoxy multi-scale composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tey, Yik Yang (2020) Fatigue Behaviour Of Degradable Polylactic Based Natural Fibre Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tham, Kar Mun (2013) Exploring The Failure Mode And Mechanical Properties Of Spot Welded Dissimilar Joints For Austentic Stainless And Galvanized Steels. Project Report. UTeM, Melaka. (Submitted)

Tham, Wei Jian (2020) Accelerating the convolutional neural networks(CNN) using FPGA. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tharuma Rethinam, Nishanti (2016) Development Of Fibre Optic Sensor For pH Level Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Thevendran, Sasinthiran (2018) Analysis of partial occlusion on human pedestrian detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Thiagarajan, Eswaran (2022) Synthesis and characterization of electrodeposited Bi2Te3-graphene nanocomposite film. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tie, Sing Ann (2011) Stress-strain And Failure Analysis Of Steel Pipe With Stress Concentration Factors (SCFs) Under Static 3 And 4 Point Bend Conditions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tiew, Pooh Bum (2009) Application Of TRIZ Methodology In Solving Arc Welding Problems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tiew, Yong Leek (2021) Vibration analysis of a plate with three parallel horizontal cracks. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Timothy , Guri (2010) The Effect Of Temperature Rise On The Electrical Characteristic Of Solid Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ting, Carron Shuang Sia (2018) On the use of nano fibrillated cellulose (NFC) fiber as reinforcement in polylactic acid (PLA) matrix composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ting, Wai Lok (2017) Detecting emotion in images using deep learning for sentiment analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tio, Kok Wei (2015) Effect Of Formation Temperature On The Properties Of Graphite/Stannum/Polypropylene Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tiong, Jing Yin (2018) Design And Development Of Ergonomics Mouse Tray For Office Workers. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Toh, Kian Siong (2011) Design And Analysis Of Hole Pattern For Vacuum Manifold Using CAE Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tong, Siau Khee (2017) EEG-Based Emotion Classification By Using Convolutional Neural Network (CNN). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Too, Pei Pei (2015) Application Of Bagasse Waste On Lightweight Composite Structure Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Too, Yi Wei (2017) The physiognomy of customer archetype towards the product design preference. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tuah, Nur ‘Ainaa’ (2024) Mechanical properties of jute fiber polyester hybrid composite filled with eggshell. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tuan Amru Hasan, Tuan Yusof (2008) Kajian Kelakuan Lesu Dalam Bahan Berlogam Dengan Menggunakan Teknik NDT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tumijan, Nurfarhana (2018) Design,optimization and fabrication of a 3D printing orthopedic calf cast. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tun Noor Syuhada, Abdul Rahman (2006) Automated Modification And Storage System In Computer Aided Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tung, Pooi Lee (2018) Evaluating The Trade-Off Between Accuracy And Real-Time Tracking Performance Of Discriminative Correlation Filter (DCF) Based Short-Term Visual Tracker. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

U

Ummi Nazirah, Jamil Khair (2013) Real-Time Wireless Face Recognition System (RT-WiFARES). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Unakrishnan, Vinesh (2017) An Experimental Investigation Of Multi-Ring Under Quasi-Static And Dynamic Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

V

V. Segaran, Raguvaran (2014) Design of a noise insulator for ripple mill at kernel recovery plant in palm oil mill. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Varathan, Vaithiswary (2020) Ergonomic Study Of Working Postures And Workstation Design In Channel Assembly Process At A Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vasu Thavan, Lingeshpari (2016) Industrial case study on the effect of particle size on warpage of alumina substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Veeran, Ranjitha (2021) Instance segmentation using mask RCNN on chilli-padi stereo images for maturity detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Vejaya Kumar, Ejay Kumar (2023) Study the material of fishing rod and their stiffness and elasticity strength using bending test. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Veryson, Kohiya (2016) Development A Dented Defect Detection On Cylindrical Type Battery Via Vision. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vinoad, Ganesan (2015) Image Enhancement By Detecting And Removing Rain In Digital Images. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Viswanathan, Venuraj (2019) Tensile test and flexural test analysis for banana plant stem fiber being reinforced with polyester resin composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Voon, Shing Ling (2009) Study Of Palm Oil Fiber For Filtration Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

W Ishak, Wan Muhammad Sulaimi (2023) Effects of heat treatment on non-dendritic grains microstructure and mechanical properties of A356 alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

W. Mohamad, Wan Amirul Safwan (2016) Optimization Of Stacking Sequence And Ply Thickness For Composite Of Aerospace Using Design Of Experiment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Abdullah Shani, Wan Nur Fateehah (2015) Study on superhydrophobic surface of green magnetic sheet from durian shell. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Amiruddin, Wan Mustapha (2008) Pembangunan Prototaip Sistem Pengukuran Penggunaan Bahan Api Menggunakan Meter Aliran Tunggal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Awang, Wan Azniza (2017) Effect Of Pressure On Composite And Aluminum Bonding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Azmi, Wan Amanina (2024) Research and analysis on mechanical properties of jute / glass fiber for green panel application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Ghazali, Wan Nurul Shahdan (2014) Ergonomic improvements on shock mitigating boat seats for yatcht cabin. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Jusoh, Wan Farhan (2015) Surface roughness measurement by using image processing based techniques. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Mahasan, Wan Nor Syafiqah (2022) Analysis of simultaneous wrist torque and electromyography of the dominant hand:The effects of wrist position, exertion direction and gender. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Mohd Akram , Shukri (2011) Carbon Nanotubes Related To Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Asyraf, Wan Zakaria (2008) Carburizing Effect On Impact Toughness Of Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Azhar , W Mustafa (2008) Detector System For Sleepy Driver. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Hafiz, Wan Harun (2011) Effect Of Nano Calcium Carbonate On Epoxy Composite Reinforced Recycle Rubber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Muhammad Faiz, Wan Mohamed Arshad (2015) Role Of Intermetallic Compound On Thermal Crack Propagation Of Lead Free Solders. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nor Shela Ezwane, Wan Jusoh (2012) Analysis On The Effect Colour Temperature Of Incident Light To Inhomogeneous Object In Industrial Digital Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Norzuraidi, Wan Nurfadzlyn (2019) Visual Based Distance And Speed Estimation For Collision Avoidance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Nuhairi, Wan Salleh (2015) Implementation Of One Way Communication In Fiber Optic Cable For Development Of Microphone System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nuraini, Mohd Jamil (2011) Investigation On Effect Of Various Speeds On Springback Characteristic Of Aluminum Alloy Sheet 6061. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nurul Fatihah, Wan Mohamad (2010) Hibiscus Cannabinus L. Brick Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Omar, Wan Mohamad Syarifudin (2019) Synthesis Of Indium Zinc Oxide Via Sol Gel Method As Conductive Filler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Saiful Bahrin, Wan Zulhilmi (2019) The functional properties of silver/carbon nanotube hybrid composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Yusuf, Wan Norsyamila (2017) Porous Tricalcium Phosphate For Dental Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Zahari, Nurul Atilea (2019) Design And Analysis Of Naringin Concentration Sensing Based Side-Polished Polymer Optical Fiber (Pof). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Zaini, Wan Azamudin (2020) A deep learning design in classifying skin cancer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Zulkifli, Wan Nadia Syakira (2017) An intelligent traffic controller system based on vehicle detection and counting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wang, Sheng Hue (2017) Investigation Of The Buckling Behavior Of Axially Compressed Truncated Cone With Uneven Length. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wang, Tack Kuan (2019) Face Recognition Attendance System Using Deep Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wira, Muhamad Amirul Amin (2022) Automatic self-alignment footing system for rotating shaft. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wira, Muhammad Aiman Haiqal (2023) Thermal comfort study on baby stroller using fan with fabric duct as air distribution method. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Wiradani, Md Ali (2010) Motion Tracking System Using Computer Vision With Opencv Source Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Woi, Kah Wei (2017) Investigation On Tensile And Hardness Properties Of Novel Hybrid Oil Palm Empty Fruit Bunch/ Kenaf Reinforced High Density Polyethylene Composite For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Won, Poh Ting (2017) Ultra-WideBand antenna array design and development for microwave imaging. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wong, Sau Keong (2005) Numerical Study Of Two-Dimensional Transient Heat Conduction Using Finite Element Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Yu Wah (2008) Design And Development Of Prototyping High Pressure And High Temperature Steam Cleaning Jet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Eu Lik (2018) Investigation On Thermal Performance Of Prospective Green Materials As Building Wall Insulation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Gao Jie (2016) Quality Checking And Inspection Using Machine Vision Technique. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Wong, Jia Shun (2021) Aerodynamic study of a new car roof box using CFD. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Jiun Yet (2008) An Experimental Study On Building Vibration At Industrial Campus (UTeM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Kylie Muh Shin (2015) Effect of catalyst and heat treatment temperature on the coating properties of sol-gel TiO2 thin films. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Poh Ling (2015) A Signal Processing Perspective With Normalized Silhouette Image (NSI) And Shape Fourier Descriptor (SFD) Towards Human Silhouette. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Pui Kei (2019) Feasibility Study Of Adoption Pulsation Coolant On Cutting Force During End Milling Aluminium 6061. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Teng Hui (2017) Preparation And Characterisation Of Natural Fiber Filled Asphalt Based Damping Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Yew Sheng (2018) Design Of Peel Test Fixture For Adhesively Bonded Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Woo, Wan Nee (2018) Optimization of injection molding parameters for 80:20 virgin-regrind blended ABS plastic material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Woon, Jun Jet (2019) Ergonomic risk assessment on weight lifter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Y

Yaakob, Mohd Yuhazri and Salit, Mohd Sapuan and Pieter, Hasoloan Haery Ian and Badarulzaman, Nur Azam and Mohd Sohaimi, Risby (2017) Fundamental Study On Direct Recycling Of RHDPE In Concrete Structures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yahaya, Izzat Nadzmi (2018) Study And Development Of 3D Monitoring System For ROV By Using Arduino With IMU Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yahaya , Nur Yuzatul Aqilah (2016) The Effect Of Strain Rates On The Fracture Behaviour Of Biocomposites. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Yahya, Amirudin (2019) Investigation Of Hot Press Quenching On Hardness And Microstructure For High Strength Boron Steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yang, Kok Wei (2008) An Experimental Study On The Propagation Of Vibration And Comparison Of Damping In A Steel Support Structures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yang Xin, Mei (2017) The Effect Of Cell Wall Thickness On Mechanical And Physical Properties Of Rubber Wood Honeycomb Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yao, Tee Seng (2010) Machine Vision In Character Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, David Fook Weng and Wong, Yan Chiew and Noor Shahida, Mohd Kasim and Ngo, Hea Choon (2010) Analysis on the Performance of the Long-Wavelength Vertical-Cavity Surface-Emitting Laser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, Ching Yee (2018) Material deposition on aluminum by electrical discharge coating (EDC) with tungsten powder suspension. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yap, Sher Kee (2019) Automated quality inspection on tile border detection using vision system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yap, Sin Yin (2016) Effect of thermoplastic mesh incorporation on the mechanical and physical properties of fibre reinforced laminate structures. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yean , Fook Cheng (2009) Effect Of Nanofiller (Pristine Montmorillonite And Hydrotalcite Lamellar Clays) Of Corrosion Activities On Paint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeap, Hong Kheng (2016) Mechanical and physical analysis on the effect of commercial aluminium mesh in fibre reinforced laminate structures. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yeck, Wai Hoong (2011) Fatigue Strength And Behaviour Of Notched Steel Specimens. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yee , Jia Huea (2009) Investigation Of Surface Roughness Between The Conventional And Climb Milling For Aluminum Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeoh, Seng Fu (2010) Corrosion Behaviors Of Tool Steel In Tannic Acids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeow, Eu Jin (2015) Determine Tensile Properties Of Dry Carbon Reinforced Epoxy Composite Using Hand Layup Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Chun Keong (2018) Performance Evaluation Of Convolutional Neural Network (CNN) For EEG Emotion Classification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Poh Yee (2010) The Study Of Palm Oil Fiber For Filtration Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Zi Wha (2015) Research Viration On Wideband Linear Resonant Generator Energy Harvesting Device For Remote Sensing Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong Mahmod Iskandar , Ab. Wahab (2007) Lapisan Sempadan Bergelora Pada Plat Rata Dengan Pelbagai Kekasaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yoong , Thiam Long (2006) A Study On End Quench Process Of Carbon Steel Low Alloy Steel And Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yunadi, Nazirah Aqilah (2023) Investigation of corrosion rate of AISI 316l stainless steel in Malaysian tropical fruit juice environment using factorial experimental design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yusof, Mohd Amir Arif (2019) A study on new material of building partition wall fabricated from biocomposite coconut fiber-based. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yusri, Muhammad Hakimi (2023) Enhancement of cutting surface quality of abrasive waterjet by using multipass cutting strategy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yusuf, Yusliza and Mohd Rosli, Zulkifli and Mohamad Juoi, Jariah and Azhari, Muhamad Azwar and Omar, Nooririnah and Wan Zulkuifli, Wan Amirul Shafiz (2017) Wear And Corrosion Protection Enhancement Of MgAZ91D Through The Deposition Of TiABN Duplex Coating. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zahar, Muhammad Hafizuddin (2017) Determination Of Dynamic Properties Of Laminated Rubber-Metal Spring Circular Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zahari, Muhammad Izzul (2018) Performance investigation of sprocket and chain using finite element method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zahrinnuddin, Mohammad Zaim Haikal (2018) Investigation on rheology properties of natural fibre composite for fused deposition modeling application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zaidi, Aina Izzati (2018) Analysis Of The Bending Effect Of Multimode Fiber (MMF) Structure Toward The Performance Of The Single Mode-Multimode-Single Mode (SMS) Fiber Optic Sensor For Liquid Concentration Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaidi, Mohammad Zharfan (2018) Effect of temperature on the mechanical performance of joints bonded with electrically conductive adhesive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zaidi, Zolkefle (2015) Study The Behaviour Of Different Elements In Ansys Finite Elements Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaidon, Nor Syafiqah (2018) Development Of Emotion DJ System For Entertainment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zaim Zakwan, Mohamad (2015) Penyiasatan Perambatan Gelombang Akustik Pada Struktur Konkrit Bertetulang Dengan Batu Baur Tertanam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Abideen, Muhammad Danial (2016) Motion Tracking System Using Computer Vision With OpenCV Source Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Abidin, Muhamad Aqil (2017) Finite Element Analysis Of Oblique Impact On Composite Bicycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Abidin, Siti Nuradibah (2019) Surface Modification Of Mild Steel Using Powder Metallurgy (PM) CU Electrode. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Roslan, Ilyana Amalin (2019) Vehicle Plate Detection System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zaini, Nurzafirah (2018) Development Of Automated System Integrated With Vision-Based Inspection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainin, Nur Syafiqa (2017) Fiber Optic Sensor For Different Concentrations Detection Of Honey. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainuddin, Irne (2018) Study of nickel titanium dioxide coating prepared by electrodeposition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainuddin, Muhammad Fikri (2017) Anthropometry of UTeM FKP male students : comparison using motion capture camera and traditional anthropometric method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Fatin Aida Aqila (2015) The human analysis and ergonomics for the seat design of electric buggy (driver seat). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Kamarul Ariffin and Abdullah, Shahrum Shah and Ali, Mohd Basri and Yusuff, Mohd Asri and Kassim, Mohd Shahir and Shaadan, Siti Norbaya (2018) Investigation On Fatigue Life Characteristic And Failure Probability Subjected To Variable Amplitude Loadings. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Nurul Azma and Yusof, Robiah and Abdollah, Mohd Faizal and Harum, Norharyati and Md Shah, Wahidah and Khamis, Noorli (2018) Construction Of Transition Mechanisms Matrix For IPV6 Enterprise. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Nurul Sabrina Syarfa (2019) Design And Analysis On New Mechanism Of Slipway Cradle For Alkahfi Asura Crew Boat. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakariah, Muhammad Nadzrin Zariq (2019) The study of flank wear using coated alnova (A1CrN) boron steel (22MnB5) on aluminium AA6061. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zali, Mohamad Zainudin (2018) Analysis the awkward posture ergonomic risk and workstation simulation at aero composite industry (mechanical assembly). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zamree, Ahmad Zulfadhli (2018) Effect of natural wax on the mechanical and water resistance properties of thermoplastic cassava starch. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zamri, Nurin Aifaa (2016) Design optimization of car jack using finite element analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zarry, Mohamad (2008) Study On The Strength And Mechanical Properties Of Biocomposite Of Palm Fibers Sandwich Matrix With ABS Thermoplastic For Ballistic Armor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zatil Hazika, Kamaruddin (2015) Preliminary Study On The Effect Of Composition To The Mechanical Properties Of Epoxy Lalang Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zatil Hazrati, Kamaruddin (2011) Penyediaan Komposit Diperkuat Gentian Kelapa Sawit Menggunakan Teknik Pemprosesan Konvensional. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zol Nadzruddin, Muhamad Ammar Baqir (2023) Characterization and mechanical properties of porous ceramics with different carbon black contents. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zolkifly, Nor Ain Zuzila (2015) Performance comparison of out-of-plane facial detection using speeded up robust features (SURF) and scale invariant feature transform (SIFT). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zuhaimi, Afifah Khairina (2022) Investigation on physico-mechanical properties of glass-ceramic composite from eco-waste materials. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulfikri, Muhammad Aliff Syahmi (2024) Mechanical properties of glass fiber polyester hybrid composite filled with rice husk. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulhamri, Nur Syaza Syafiqah (2019) Automatic Vehicle Plate Recognition Using Template Matching. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhelmi, Saad (2012) A Study The Mathematical Modeling Of Corrosion In Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhilmi Afiq, Zulkifle (2009) Electromagnetic Power Plant Base On Perendev Theory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkafle, Muhammad Zulfirdaus (2016) Experimental Investigation Of Buckling Behavior Of Cracked Steel Cones Subjected To Axial Compression. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkafli, Muhammad Adam (2018) Performance Analysis Of Fiber Optic Current Sensor Using Sagnac Interferometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkafli, Muhammad Rahdi (2018) Optimization parameter of boron tool wear with surface texture for AISI 1018 low carbon steel in wet turning process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkalnain, Mohd Asyraf (2019) Optimization Of Intruder Detection Algorithm Using Raspberry Pi Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkeflee, Muhammad Fikri (2014) Effect loading force and number of observation accuracy of aged inconel 718. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkefli, Zulkhairi Luqman (2021) Design And Development Of A Wearable Anti-Motion Sickness Device For Autonomous Vehicle Riding Experience. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkfli, Nur Afifah (2016) Fiber Optic Liquid Sensor For Types Of Engine Oil Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkiflee, Anwar Syaakirin (2022) Classification eye disease (PTERYGIUM) using comparative method of deep learning. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Abdul Majid (2005) Design And Manufacture Of A Spectacle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Azni (2016) Optimization of conceptual manual wheelchair design using integrated QFD and DFMA. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Muhammad Hasif (2023) Comparative studies of Tung and linseed oil microcapsule as self-healing coating for corrosion protection of low carbon steel substrates. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Nor Aifa (2018) Repair welding on stainless steel to carbon steel orbital pipe joint. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Nor Syazana Adilah (2019) Study On CaCO₃ Mineral Filler Loading Effects Into SiR/CaCO₃ Based Composite As Dielectric Resonator For 5G Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Nurul Ainhidayah (2018) Investigation of buckling behaviour of axially compressed cyclinder with uneven length having triangular waves. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Nurul Atiqah (2017) Printing large 3D objects with interlocking part design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zuraida, Hamzah (2015) Effect of annealing temperature on electroless ternary nickel alloy properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zurina, Zaul Kafilai (2006) The Use Of Alumina In Adhesive: Flexible Polymer Ceramic Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)