Design A Strain Demonstration Unit

Mohd Fadhillah , Mohamad (2006) Design A Strain Demonstration Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Design_A_Strain_Demonstration_Unit_-_24_Pages.pdf - Submitted Version Download (1MB)
	PDF (Full Text) Design_A_Strain_Demonstration_Unit.pdf - Submitted Version Restricted to Registered users only Download (8MB)

Abstract

This project is related about to design a strain demonstration unit. This demonstration unit is a device that can perform a strain test. To design this demonstration unit, there have many step need. It starts with sketching the shape of the demonstration unit that need to produce. After the sketching approve, and then using the drawing software to draw the modeling of the demonstration unit with dimension. In this project, the drawing software used is Solid Works 2001plus. After that, fabricate the demonstration unit follow the drawing that has been draw. Material used is mild steel with thickness 1.5 mm. Then, the demonstration unit had been use to perform strain test with three types of material, mild steel, aluminium and copper. The strain gauges had been store on the specimen to detect the displacement occur when specimen is under loading. The value from the experimental will be compared with theoretical value to check the agreement. The result from experimental and theoretical had been discussing details in Chapter 4 at it shows that the result is close agreement. The tensile test also had been performed. The result from this test also had been discussed in Chapter 4 and the discussion of the result discuss in Chapter 5.

Actions (login required)

View Item