Design And Analysis On Brake Disc Skimming Machine Holder With Transfer Gear

Idris, Nur Ilani (2017) Design And Analysis On Brake Disc Skimming Machine Holder With Transfer Gear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Text (24 Pages) Design And Analysis On Brake Disc Skimming Machine Holder With Transfer Gear.pdf - Submitted Version Download (388kB)

Abstract

Skimming is the process to resurface brake disc to make sure the effectiveness of the brake system nevertheless it is also one of safety factor in transportation. Hence, part of the brake disc skimming machine that emphasized in this project is brake disc holder with transfer gear. As the skimming machine become one of the important in car’s maintenance it is essential to considered how the machine are implement to the customer. The objective of this thesis is to design the holder and simulate the brake disc skimming machine holder also to analyze the performance of the skimming machine holder using CATIA software. The thesis describe the importance of the brake disc skimming and the consequence for neglecting the skimming process. Transfer gear will act as regulator depends on required shaft rotation whereas the holder will tighten the grip of brake disc so the brake disc will rotate without any interruption. Furthermore, the holder will prevent the brake disc from uneven rotation and avoid rough surface after skimming. Despite all that, the holder are being test whether the performance of the skimming process could have undergo for better performance than previously. It is important to study of both, holder and transfer gear, as it will give an impact to the skimming process. Finally the acquired result from CATIA analysis and simulation can be help on the skimming process. The result show how brake disc holder with transfer gear work together in order to make the machine works perfectly and better in result.

Actions (login required)

View Item