Rapid Prototyping On Biomanufacturing

Mohd Firdaus, Ramli (2010) Rapid Prototyping On Biomanufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Rapid_Prototyping_On_Biomanufacturing.pdf - Submitted Version Download (2MB)
	PDF (Full Text) Rapid_Prototyping_On_Biomanufacturing.pdf - Submitted Version Restricted to Registered users only Download (13MB)

Abstract

This project are highlighted to the study of the feasibility of using new material for producing a product that could replace real bone and to study the capability of RP machine to produce model by using new material other than its usual powder. There are so many RP machines but during this project only 30 printer that will be use that is Zprinter 310. The new material that will be use was called as hydroxyapatite specifically by using cockle shell. This research was begins with process of crushing the cockles using crusher machine and variable rotor mil and the other subsidiaries process. After that the process continues with the selection of suitable binder for the hydroxyapatite. Next step is run the RP process as usual. If the model failed to be created, an analysis was conduct and finds the solution. The RP process is repeated until the model is successfully produces. Finally do the simple analysis such as compression test and visual observation analysis on shape and dimension for the model created.

Actions (login required)

View Item