Items where Subject is "T Technology > TS Manufactures"

Mohd. Rizhuan , Othman (2007) Design For Die Casting (Spanner). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Yong Lim (2015) Design And Development Of Sustainable Filament Extruder For 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mahathir , Mohd Daim (2007) Feasibility Study Of Product Localization: A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raudhah , Zainal Rashid (2013) Thermal insulation particle board made with sugarcane bagasse fiber, kenaf core powder reinforced with polypropylene. Project Report. UTeM, Melaka. (Submitted)

A

A. Perumal, Puvanasvaran and Abdul Hamid, Mohd Syaiful Rizal and Tang, Sai Hong and Syed Mohamed, Muhammad Syafiq and Tay, Choo Chuan and Chong, Kuan Eng (2018) Quantification Of Customer Demand In Overall Equipment Effectiveness And Its Standardization In Continual Production Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A.Fadzil, Nur Fazreeha Ameelya (2017) The Optimization Of Cold Metal Transfer (CMT) Welding Process Parameters On 5052 Aluminium Alloy Tensile Strength Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Halim, Nabilah (2017) Effects Of Boronizing On Sharp Cornered Metal Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abang Let, Abang Mohd Elna Fiqri (2017) Facial Characteristic Of Product Preferences Based On Phi Approach Towards Aesthetics. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Syazxerlin (2017) Line balancing using lean manufacturing tools at balloon packaging department. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Ghani, Anis Aqilah (2019) Optimization Of Processing Parameters To Maximize The Physical And Mechanical Properties Of Natural Rubber Composites For Engine Mount. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Lah, Akmal (2015) Establishment Of New Standard Time For The Manufacturing Of Hot-Dip Galvanized Steel Of Tenaga Nasional Berhad (TNB) Concrete Pole Accessories. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Latiff, Anas Naufal (2022) Comprehensive study on selective laser sintering 3D printer polyamide 12 recycle parameter and dimension measurement accuracy effect on maintenance application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Muin, Najihah (2017) Influence Of The Work Hardening On Springback Of The U-Bend 316L Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Hatim Yaseer (2016) A Reconfigurable Logic Control Method For CIM System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Razakuan (2015) Design of laboratory information and management system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rama, Nur Syafiqah (2017) Development Of A Smart Baby Stroller Using Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rashid, Mohd Ariff (2019) Developement Of Rice Treatment Method Towards Ankle Sprain Syndrome. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Abd Halem (2011) Comparison Of Sand Casting Surface Roughness And Dimension Accuracy Between Aluminium Silicon Carbide And Tin Silicon Carbide. Project Report. UTeM, Melaka. (Submitted)

Abd Razak, Muhammad Hafiz (2009) Design Of The Robust Gripper Control For Hoisting Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Fariha (2023) Development of a simulation aided scheduling for packaging process at teaching factory. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Wahid, Syakira (2017) Development Of Car Temperature Cooling Control By Using Magnet Code. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Mohamad Azim (2017) Fabrication Of Electronic Fuel Injector Tester For Education Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hakim, Nur Raihana (2019) Improvement Of Production Line Flexibility Through Rapid Changeover Via Time Reduction Of Internal Activities. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Nor Faizah (2017) The Optimization Of Friction Stir Welding Parameter For Aluminium 5052 By Using Full Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid , Mohd Syaiful Rizal and Chew, Boon Cheong and A.Perumal, Puvanasvaran and Mohd Noor , Khairul Baharein and Shamsuddin, Alina and Hanafi , Zulkifli and Mohd Idris, Mohd Fadzil and Choong, Chien Khay (2018) Preventing Technological Disaster Through Risk Assessment Protocol (RAP) Development For Malaysia High Tech-High Risk Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hayyan, Abdul Halim (2010) The Study Of E6013 Electrode Effect On Microstructure Of Difference Mild Steel Thickness By Using Arc Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Jalil, Muhammad Asyraf (2015) Evaluation and sensitivity analysis for selecting the best design of automotive fender using analytic hierarchy process (AHP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Jalil, Muhammad Hafizzul Saffuwan (2017) Design and development of a checking fixture for an automotive press part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Kadir, Mira Asyikin (2016) Welding Patterns Influence On The Joining Strength Of Mild Steel Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Muhamad Fitri (2018) Development of value stream mapping for palm oil company : a case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Majid , Ali (2008) Autonomous Maintenance Programme For Milling Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Malek, Asnawi (2018) Design And Development Of Platform For Large Object 3D Printer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Muhaimin, Mohd Yusri (2015) Quality improvement through lean six sigma approach at wooden picture frame moulding company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Najib, Norhazwani (2019) Design New Mechanism Of Safety Triangle For Motorcycle Under 150 Cc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Paizal, Mohd Zain (2015) Analysis Of Preventive Maintenance For Processing Plant (Gassification Process Unit). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Mohd Aliff Mukmin (2018) Productivity improvement through TPM adoption on printing machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Muhammad Rafiq (2017) Design and development of vision guided height adjustable conveyor platform on automated guided vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahman, Nurul Amirah (2017) Surface finish improvement using retraction method for fused deposition modeling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razali, Nurul Wahida (2014) Enhancing Quality Management System Through Continuous Quality Improvement Practices In Malaysian Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahab, Nurfarahin (2018) The study of MRT commuter's satisfaction of MRT services at Sungai Buloh-Kajang line. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Wahid, Nadia Mazwa (2017) Effect of repair welding on pipes with dissimilar materials. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Mohammad Amirul (2016) Product Development Of Smart Soap Making Machine For Home Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Syazwan (2015) Application of axiomatic design and additive manufacturing : a case study of a door knob. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nordianaaida (2015) Convolution design profile toward kansei engineering. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nurul Fatehah (2018) Influence of swelling media and soaking parameter to the physical properties of natural rubber/EPDM nanocomposites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah Kamil, Puteri Eliani Fikri (2017) Layout analysis and improvement in a manufacturing industry : a case study. Technical Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah Sani, Nor Syaima' (2014) 5S Implementation In Malaysian Manufacturing Industry : What's New? Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Hassan, Nurul Ismahani Adilah (2021) Preparation and characterization of SiR-EPDM filled with waste glass powder (WGP) rubber blend composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Zarin, Muhamad Syahmi (2019) Optimization Of Product Architecture By Using Design For Manufacture And Assembly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abullais, Fairil (2019) Simultaneous Assessment System Of Work Posture And Muscle Activity For Manual Materials Handling Tasks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adam Maleck , Hamid (2008) Part Combination Of Design For Assembly (DFA) Using Flow Analysis (EFA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi Khairi, Abdul Latif (2015) Robust Automated Guided Vehicle (AGV) Controller Design Method For Uneven Terrains Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adibah Hanun, Mohd Arif (2015) Design, Analysis And Simulation Of Casting Defect On Water Pump Housing Using Casting Simulation Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Mohammad Noor Khairul Azrin (2008) Design And Development Of Cctv Using Webcam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Fatin Atiqah (2019) Improving SMED Process At Milling Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Muhammad Aidil (2015) Manufacturing complexity characterization: case study at Micro-Nano Precision Sdn. Bhd. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adnan, Nor Farahin Aida (2018) Process optimization to improve surface finish in fused deposition modeling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Afandi, Abd Latif (2011) Application Of Material Selection On Bumper Fascia Based On Design For Sustainability (DfS) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Affendi , Hussin (2008) Design, Analysis And Fabricate Of Pressure Vessel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahamad, Mohamad Naubfal (2014) A study on material management at an aerospace production. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Akmal Abdul Rahim (2017) Spare Parts Optimization (Valve) For Boiler At Coal Fired Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Faris Afiq (2019) Impact Of Tool Features On The Quality Of Weld In BFSW Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Zulhelmi (2014) Development of an automated guided vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Akmar, Ahmad Zahin (2017) Design of automatic workplace clamp for bridgeport vertical milling machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Fadlishah , Ahmad Foad (2009) Robocon Manual Robot Gripping Mechanism. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Faizal, Baharudin (2005) Wagon Elektrik : Pembangunan Yang Di Guna Di Dalam Pembuatan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal , Ahmad Jamil (2008) Joining Performance Of Aluminium T6063 Using GTAW Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fitri, Sukarman (2010) Implementation Of Design For Manufacturing And Assembly (DFMA) Methodology To Analyze Antitheft Device System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Kamely, Mohamad and Johny Purnomo, Joewono (2013) Performance Analysis Of Mechanical Properties And Weldment Area Of Aluminium Alloys. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Muslim , Othman (2008) Failure Analysis On TIG Weldment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nordin, Mohd Firdaus (2017) Design Of Integrated 3D Printer Recycle Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rijal , Abdul Rahman (2010) Maintenance Monitoring System Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rozelan, Aina Dalila (2022) Process development of die casting in a production line. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Salim, Muhammad Ikramullah (2020) Mechanical Properties Investigation Of 3D Printed Parts Under The Exclusion Of Oxygen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Shafie, Razak (2015) Comparative Study On Differene Approach Of Boothroyd Dewhurst (B-D) Design For Assembly Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syahid , Mohamad (2009) A Study On The Application Of Value Stream Mapping In Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zahirudin , Mohamad Ramdzan (2008) Proses Pengoptimuman Parameter FDM Bagi Material ABS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aida Adlina , Mohamad Raffi (2006) Machining Performance Of Titanium Carbide (TiC) As Tool Coating. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Aizuddin , Pata Ariffin (2007) Design And Development Of CIM System - Lifter Platform. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Akasak, Nurul Syazwani (2019) Statistical Analysis Of Repetitive Repair Welding Using GMAW On Stainless Steel Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akhyani , Alias (2015) Six sigma implementation to improve quality. Project Report. UTeM. (Submitted)

Akmal, Suriati (2017) Ontology-Based Approach To Elicit Precise Information For Accurate Automotive Product Development. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Al Amin, Mohamed Sultan (2009) Development Of General Value Stream Mapping For Productivity Improvement And Kaizen Implementation At An Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al-Bakri, Abdulrahman Mohsen Saleh (2017) Design of control and integration strategy for multiple handling system using programmable logic controller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alaganathan, Mariappan (2014) Innovative die design for sheet metal stamping. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alagendran, Andiappan (2013) Developing Lean - EMS Integration Database For Sustaining ISO 14000 Certification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alagendran, Andiappan (2013) Developing Lean - EMS Integration Database For Sustaining ISO 14000 Certification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alia Najwa, Runuma (2015) Vacuum Casting: Fabricating A Pipe Reducer Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Farah Nurhidayah (2017) Design For Improvement Of Metrology And Inspection Of Integrated Circuit For Accuracy Check Using Smartscope Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Nur Shahirah (2019) Tribological Properties Of 3D Printed Acrylonitrile Butadiene Styrene (ABS) Under Dry And Wet Conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aliff Zulkarnain , Mohd Nor (2015) Zero tolerance in production for quality improvement at composite industry. Project Report. UTeM. (Submitted)

Alkahari, Mohd Rizal and Ramli, Faiz Redza and Maidin, Shajahan and Sudin, Mohd Nizam and Rosli, Nor Ana (2019) Consolidation Characteristics Of Parts Fabricated Via Open 3D Metal Printing Utilizing A New Integrated Plasma Deposition Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alwiy, Muhamad Fauzie (2017) Design of personalised insole for production line industrial workers via level of pain and pressure distribution data. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ameen , Mahadi (2008) Developmet Of Human Interface (HMI) For Flexible Manufacturing System (FMS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amin, Abdullah Hapipi (2015) Dimensional Accuracy Of The Platinum Faro Arm For Reverse Engineering Products Using Fused Deposition Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir, Azuwaizie (2010) Implementation of RFID Technology At The Zoo Entrance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hanin , Yazid (2007) Productivity Improvement Using One Piece Flow Techniques : A Study At An Electronic Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Mohamed, Kamarul and Muhamad, Mohd Razali and Yaakob, Mohd Yuhazri and Abdul Mutalip, Zaiton and Anand, T. Joseph Sahaya and Bidin, Basri and Jantan, Zulkifli and Musa, Mohd Sukri (2018) Automatic Bahulu Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amira, Sahari (2012) Time Study Method Implementation At Jecmetal Industries Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul , Sait (2008) Potential Application Of Ferrofluid For Robot Gripping Mechanism. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amirulnozam, Hamidon (2005) To Develop The Production Process Flow Layout For Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amit, Auzai (2017) Design Of Electronic Fuel Injector Tester For Educational Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Ammar Syafi (2023) Design and analysis of low-cost twin-screw filament extruder. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ang, Chi Yuan (2014) A Study Of Eco-Innovation In Small And Medium Enterprises (SME) Manufacturing : A Case Of Selangor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Sei Qi (2010) Develop A Linear Measurement Sensor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aniz Farznor, Sariffuddin Hussani (2015) Investigation Of Design Rule For FDM System In Additive Manufacturing: A Case Study Of A Blender Jar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Antasya , Mohd Arif (2006) Analysis Of Different Current Setting In OTC DR 4000 Robot Welding For Mild Steel. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Anual, Mohd Tarmizi (2014) Design and analysis of welding fixture based on dynamic load condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar , Muhammad (2006) Study The Wear On High Speed Steel (HSS) Cutting Tool By Variable Parameters Turning Operation. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Anwaruddin, Amirah Nadiah (2016) Portable LED Dot Matrix Display Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aqmal, Hashim (2013) Remanufacturing Analysis By Using Failure Mode And Effects Analysis (FMEA) For Engine Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariston Shah, Azmeer Shah (2017) Performance analysis of industrial robot under loaded conditions and various distances. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Asaari , Mohd Muji (2007) CS-8 Humanoid Robot (Body). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ashrof, Suaib (2015) Design And Development Of A Navigation System For AGV. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aslah, Mohd Zaim Afiq (2017) A study of future of manufacturing in the context of developing countries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Asleeda , Ahmad (2008) Six Sigma (DMAIC) Implementation In Industry. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Aun, Khor Yong (2008) Analysis Of Data Exchange In CAD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Muhammad Amin (2019) Design And Development Of A Portable Peanut Skin Remover Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang @ Rozalli, Ahmad Sofwan (2016) Design Of Ultimate Shield For Fire Fighting Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayob, Muhammed Syameel (2017) Parameter-properties relationship of thin plate welding by ColdArc technology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ayu Fateha, Abdul Hamid (2015) Lean Manufacturing At Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azam, Ahmad Faisal (2021) Concept design and analysis of filaments extruder for 3D printing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azemin, Masyhadi (2016) Design and analysis of optimum clearance of an open small thimble blanking die. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azie Noor Marlia, Ruslan (2015) Design Analysis Of A Baby Stroller By Using Design For Manufacturing And Assembly Method (Boothroyd Dewhurst). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Nurniqmah (2019) Minimization Of Unnecessary Inventory By Using The Application Of Pulling System In Manufacturing Industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizul , Mokhtar (2007) Line Balancing And Optimization For Single Model Assembly Line At A Small Medium Industry (SMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan, Muhammad Afiq (2019) Design And Development Of Square Hole Digging Ground Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azlan , Othman (2006) Development Of Low Cost MRP Software For A Manufacturing Process. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Azlan Soffian, Borhan (2015) Estimate The Life Cycle Of Roller By Experiment And Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlinda, Mohamad (2013) Optimization Of Injector Gun Design Using Design For Manufacturing And Assembly (DFMA) At The Conceptual Design Stage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Mohd Talib (2005) Design For Environment In Electronic Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Afrena Darwisyah (2022) Detection of defect of an automotive part using image processing approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Hamzah (2007) XY Palletizing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Marrisa (2021) Analysis on passing characteristics of gas valve using AE. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Nor Azatul Fasya (2017) Elimination of product shortage at dispatch line in manufacturing industry by using lean tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Norhashima (2015) Assessing a system reliability: a case study in manufacturing company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Norsyafiq Amirulamry (2017) Effect of citrate bath composition and heat treatment process on the properties of electrodeposited Nickel-Fly Ash (Ni- FA) composite coating on aluminium alloy 7075 substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azrif Faris , Abdul Jalil Alwi (2015) Design and fabrication of semi-automated parts supply system for automotive industry. Project Report. UTeM. (Submitted)

Azrul , Jasni (2007) Portable Cocoa Bunch Wrapping Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Badeli, Siti Yuhainiazwa (2016) Applying Process Failure Mode And Effect Analysis (PFMEA) Approach By Using DMAIC To Improve Product Quality Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharud-Din, Nursyuhada (2022) Productivity improvements through Poka Yoke concept in food industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baharudin, Nor Afrina (2020) Preparation And Characterization Of Seaweed Nanopowder Via Acid Hydrolysis Method A Critical Review. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bakrulazi, Siti Aishah (2022) A comparative study of surface roughness, tensile strength, microstructure, and porosity of the un-dried and pre-dried PETGTPU FDM filaments. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baskerran, Mineshvaran (2022) Relayout the production floor of teaching factor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bee, Sheng Chong (2018) High Speed 3D Printing Strategy Using 6 DOF Non-Mobile Robot Manipulator Based On Shortest Distance Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bernabas, Kesavan (2019) New Design Of Knee Locking System For Knee Support Health Device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bong , Kuan Fung (2009) Engineering Design Analysis On 5 Kg Payload Gripper For Comao Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Boo, Jia Min (2018) Development of new standard operation procedure configuration for disassembly work. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Burhanuddin, Mohd Aboobaider and Mohammad Ishak, Desa and Zeratul Izzah, Mohd Yusoh and Sazalinsyah, Razali (2007) Rekabentuk Dan Pembangunan Sistem Penyelenggaraan Mesin Kilang Pemprosesan Makanan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Chai, Agatha Yan Hong (2017) Improving Inventory Management Using Open Source Software Enterprise Resource Planning (OSS/ERP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Tai Tiong (2006) Process Planning For CNC Milling Machine. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Chan, Yean Kwan (2016) Redesign warehouse storage and retrieval system at apparel industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chang, Chia Wen (2017) Improving Production Planning Using Open Source Material Requirements Planning (OSS/MRP) Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Shi Mei (2015) Design Of Control Unit/Data Path For Production Monitoring System Using FPGA Based On Overall Equipment Effectiveness (OEE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ab. Hamid, Mohamad Nor Hafiz (2016) Develop standardization work of coil setup at pressing machine : a case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Abd Razak, Nur Liyana Syahirah (2023) The investigation of environmental sustainability on industry 4.0 readiness considering Malaysia cultural preference. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Che Deraman, Nurul Farhanah (2017) The Importance Of Lean Manufacturing Practices Towards Enhancing SMEs' Productivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ku Abdul Majid , Che Ku Ariffin (2015) Preventive maintenance (PM) system applying at JTKP's labs. Project Report. UTeM. (Submitted)

Che Ku Norazma Adawiyah , Che Ku Aziz (2008) Design And Experimental Study Of Keris Mould Using Doe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mat, Abdul Azim (2016) Development Of A New Die For The Manufacturing Of Telekom Malaysia Berhad (TM) Metal Based Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mohd Nasir, Nurul A’tiqah (2023) Effect of cold chamber parameter on the gas flow in thermal transpiration pump. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Othman, Khairulnisaq (2011) 'Back To Basics' Project. Project Report. UTeM, Melaka. (Submitted)

Che Rozaida , Che Mod (2009) Design Improvement On Support System For Resin Based 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Saidi, Muhammad Syarifuddin (2023) Application quality functional deployment model in form features and Kansei vocabularies for masjid chair design. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Cheak, Celina Mei Min (2022) The effect of hand dryer fan parameter on noise and aerodynamic level. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheang, Shing (2017) Design Of Product Packaging For Product Brand Communication Based On Consumer Responses. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chee, Chew Yen (2011) Line Balancing Using Simulation In Semiconductor Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Yik Pei (2017) Implementation Of Information, Decision And Action (IDA) Method In Overall Equipment Effectiveness (OEE) To Improve Manufacturing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee Fai, Tan and Sarban Singh, Ranjit Singh (2013) Design And Development Of An Interactive Concurrent Engineering Design System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Pick Wei (2010) Study On Computer Aided Manufacturing (CAM) Software For A XY Table Positioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Kok Leong (2018) ABB IRB 120 Robot Writing Programming And Design Of A Pen Holder Tool Mechanism To Write On A Paper. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chen , Siew Teen (2011) Optimization On Manufacturing And Assembly Of The Existing Outdoor Swing. Project Report. UTeM, Melaka Malaysia. (Submitted)

Cheng, Si Pei (2015) Implementation of lean production to overcome barriers : a study on human factor. Project Report. UTeM. (Submitted)

Cheng, Wei Chiat (2016) Five Axis Tool Path Programming Utilizing CATIA V5 Single Blade. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong, Kai Mun (2016) Determination of the influence of chemical treatment to the strength of FDM used part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew, Lai Huat (2011) Integrated Product Design And Optimization Of Multiplex Electrode Holder For ARC Welding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Chee Seng (2017) Development of decision making process for fused deposition modeling machines selection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew , Heng Boon (2008) Determination Of 3-Dimensioanl Robot Workspace And Safe Working Area Using Computer Software. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chiam, Chun Hong (2017) Integration of an automated guided vehicle system with a programmable logic controlled material handling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chiew, Angeline Yuen Huei (2018) Development Of Monitoring System Database For Inventory And Material Handling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Chiew, Thiam Huat (2016) The Communication, Skill And Knowledge That Affect 5S Methodology Toward Performance Improvement In Paper Mill Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Gee Sing (2011) Development Of Automatic Quality Control System Using Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Chun Yok (2017) Design And Development Of Vacuum Forming Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chin, Yi Shian (2010) An Application Of P Control Chart To A Pager Assembly Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin , Feei Ping (2009) Design And Analysis Of Robot Manufacturing System For Automotive Industry. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chong, Jia Ming (2015) Optimizing operator cycle time in a semiconductor company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choo, Jia Huang (2016) Investigation of the effect of build orientation on mechanical properties of fused deposition modeling part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choon, Zhi Gang (2018) Development Of Monitoring System Using Internet Of Things (IoT) For Hydroponics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choong, Bo Yee (2018) A Simulation Study Of Line Balancing Using Arena Simulation Software In Industry 4.0 Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choong, Kai Yuen (2019) Implementation Of Critical To Quality In Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Christine, Sia Li Ling (2020) The Investigation Of Weld Defect Repair Using Friction Stir Addtive Manufacturing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chuah, Xuan Hong (2018) A Study Of Visual Management System To Manage Warehouse Logistic Resources At LiKom. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chung, Kar Yee (2017) Study of an aesthetic/emotional preferences on the product design characteristics. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

D

Dandai, Mohd Zahede (2023) An exploratory design project utilising the infinitive qualitative design method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dujong Inggom, Stephanie (2016) Inventory Management System For Multi Level Goods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulhisham, Aminuddin (2010) Reliability Study On Automotive Component Using Design Failure Mode And Effect Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

Effendi, Mohamad and Adi, Saptari and Rohana, Abdullah (2008) Productivity Improvement: A Case Study At A Communication Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ehyak, Mohamad Farhan Firdaus (2022) Development of squeeze and dying of batik printing system for heritage preservation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Elma Zulaika , Ab Manaf (2015) The study on customer satisfaction of public transport in Melaka by using service quality dimensions : a case study of Panorama Melaka. Project Report. UTeM. (Submitted)

Elvie Rosmieza, Mohd Zawawi (2006) Improve Manufacturing Process By Using Line Balancing To Reduce Cycle Time. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Embok Resa, Mohammad Afif (2019) Optimizing The Changeover Of Pressure Die Casting Machine By Implementing Single Minute Exchange Of Die. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Emilia Shander, Andrew Abe (2007) Control Heating Of Small Forging Using Oxy-Acetylene Flame. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Enda Nur Malia , Ngah Deman (2009) Root Cause Analysis Of Core Pin Quality Problem Using Cause And Effect Diagram. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eng , Sze Yee (2007) The Manufacturing Process Of Robo-Kidz-Toe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Erni Zahani, Buyong (2005) The Investigation Of MIG Welding Parameter Effects On Welding Of Dissimilar Metal (Stainless Steel To Cast Iron). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ervie, Gireen (2006) Quality Management System In Higher Education - A Study On ISO 9001:2000 Implementation At KUTKM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Esmadee, Shahrul Akmal (2023) Design for assembly analysis for newly developed 3D router machine. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

F

Fadli Yusof, Amirul Ridzuan (2019) Design And Fabricate Vehicle Trainer Kit For Educational Purpose (Body Structure) With Aide Of Computer Aided Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fadzil , Che Man (2013) Development Of Automated-Guided Vehicle For 300kg Trolley Towing Application. Project Report. UTeM, Melaka. (Submitted)

Fadzli, Nurul Shahira Farhana (2017) Effect Of Acetone Vapor On Mechanical Properties Of Fused Deposition Modeling Printed Part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fairul Azhar , Nasri (2008) Automatic Cable Stripper. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Faisal Faris, Rahim (2012) Optimization Of Mixing Parameters To Produce PP - Enr Blend Via Response Surface Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhan, Ahmad Fuad (2012) The Implementation Of Design For Reliability In Product Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhani, Mohamad (2008) Design And Fabrication Of Bollard Light Using Modern Product Development Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhani, Mohamad (2008) Design and fabrication of bollard light using modern product development process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fathullah Farid , Zakaria (2011) Design And Develop An Eco Fly Killer In UTeM's Cafeteria. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauzatulhamla, Mohd Salleh (2007) Downtime System (DTS) For Press Shop Department. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauzi, Mohammad Fakhru Razzi (2019) Performance Of A Cloth Drying Cabinet Using Utilizing Waste Heat From A Split Type Air Conditioner Condenser. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fevilia Nurnadia, Andria Syaifoel (2012) The Gap Analysis Measurement Of Linear Vs Non-Linear Parametric On Costemer Satification Based On Importance Performance Analysis And Kano Method In Service Industries(Hotel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong, Choon Yew (2018) Development Of An Open-Source 3-D Printable Surgical Instruments Made From ABS/PLA Plastic. Project Report. UTeM, Melaka. (Submitted)

Foong , Weng Kang (2008) Application Of Inventory Model In Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

Ganasan, Logentharan (2023) A study of the microstructure properties of cold sprayed 6061 Al on 7075-T6 aluminum. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ganash, Saartish (2022) Design and fabrication of mini water power generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ghazali, Syazrien Effendi (2023) The investigation of virtual reality (VR) tool performance for 3D design visualization considering cultural preferences. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Goh, Meryin (2011) Developing A Methodology For Productivity Improvement In A Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Hooi Fen (2010) Real Time Medical Inventory Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Lirong (2007) Inventory Management System Using Distributed System Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gue, Sey Yang (2015) Design Analysis Of A Children’s Scooter Using DFMA (Boothroyd Dewhurst) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gunalan, Thiviya (2018) Overall Labor Efficiency Study Using Maynard Operational Sequence Technique At Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hadzlin, Nur Nabilah (2017) A Study On Profile Design Of Scarves That Can Influence The Aesthetic Value And Product Evaluation Using Kano Model Method And IPA. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hafiziana , Othman (2008) Autonomous Maintenance Programme For Drilling Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hairus Saleh, Riduan (2017) Optimization Parameter And Mechanical Properties For Aluminium 5052-H32 By Multi-Passes Butt Joint Using Friction Stir Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Asmira (2017) Sustainable design manufacturing to the needs of Industry 4.0. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Halim, Mohd Hafizi (2023) Study on the effect of MAPE on the 3D printing filament properties made from wood dust/recycle pp composite (R-WOPPC). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Halis, Hanifi (2012) Productiviti Improvement In Manufacturing Industry. Project Report. UTeM, Melaka< Malaysia. (Submitted)

Hamdan, Nurul Hidayah (2014) Effect of biodegradable resin ration on the properties of resin onded sand for casting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamdan, Siti Nur Raheena (2016) Investigation of surface integrity when machining AISI 1045 using uncoated carbide cutting tools. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamezah, Fatima Hanim (2021) Effects of humidity on mechanical properties and microstructure of 3D printed PLA filament. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamsan, Mohamad Fazly (2019) Design, Optimise And Fabricate A New Modular Interchangeable Upper Part Of Gun Mounting Platform For VAMTAC 4x4 Weapon Platform Vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamzah, Anisah Atirah (2019) Applied Anthropometric Study On Light Vehicle Design And Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanapiah, Luqmanulhakim (2018) Application Of Single Minute Exchange Die And Analytical Hierarchy Process (AHP) Concept For Small Manufacturing Enterprise. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hareshwara Ruban , Subramaniam (2013) Modelling For Prediction And Optimization Of Mechanical Response Of Unequal Thickness Steel Sheet Resistance Spot Welds In Tensile-Shear Loading Condition. Project Report. UTeM, Melaka. (Submitted)

Haron, Khairul Anwar (2008) Lead Time Improvement By Re - Layout At Aerospace Company (Ctrm Aero Composite Sdn Bhd). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harun, Nur Hanis (2018) Design Improvement Of Corner Chair For Cerebral Palsy Kid. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Haryatie , Samsuri (2009) Investigation Of Plate Welding Quality By Robot Welding Using Nondestructive Technique. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hasbullah, Muhammad Haziq (2015) Design of motion strategy for mobile robot in reconfigurable manufacturing system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasni, Nur Suhaili (2018) Investigation On Smart Grid Of Generation, Transmission And Distribution With Interface Of Scada For Power Lab Labsoft. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasoloan Haery, Ian Pieter and Mohd Yuhazri, Yaakob and Puvanasvaran, A. Perumal (2011) Developing A Cost Modeling Of Value Stream Mapping To Optimize Production System Operations By Using Graphical User Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasoloan Haery, Ian Pieter and Muhammad Yuhazri, Yaakob (2013) Developing A Function Deployment And Tool For Employees And Product Quality Satisfacti Through Kano Method And Herzberg Theory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassanul Sazali , Ahmaddin (2007) Development Of CIM Control System Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazura, Haroon and Fauziyah , Salehuddin and Niza, Mohd Idris (2007) Smart Laboratory Inventory Management (Slim) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hee, Wee Kiat (2015) Design of automatic metal strips pallet stacker for slitting machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Henry Sang, Levynia Imas (2022) Solving bottleneck at production line through simulation to enhance productivity at manufacturing company. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Herman, Md Azhari (2005) Design And Implementation Of Gripper And Robot Arm (Hardware Development). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hidayatullah , Musa (2008) Study The Process Of Total Preventive Maintenance (TPM) Of Injection Moulding Machine Arbug 420C. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hj Ab Maullod, Nur Syazana (2018) Defect Improvement Towards Productivity For SME Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Hj Wan Zainul Abidin, Wan Nur Shuhada Annis (2017) Design And Develop A Stair Climber Trolley. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ho, Kam Yuen (2015) Optimization of FDM parameters with Taguchi method for production of flexible ABS part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hoe, Li Sim (2010) Design And Analysis Of Casting Mold Using CAD Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hon, Yeen Seong (2009) Microprocessor Based Dot Matrix LED Display System For Pedestrian Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hong, Tzy Yi (2018) Analysis Of Woven Fabric Characteristics For Composite Reinforcement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

How, Whee Ching (2014) Tool for mapping manufacturing critical-path time in job shop environment. Project Report. UTeM. (Submitted)

Humaidi, Ahmad Daiaurrahman (2023) The thermal effect of polymeric filaments with shape effect for 4D printing application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Huong, Yu Chung (2015) Design of remote system configuration framework in manufacturing environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Husin, Nur Aqilah (2016) To Study The Development Of Reverse Engineering Technology That Using Common Consumer Electronic Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussein, Nur Izan Syahriah and Ayof, Mohd Nizam and Abdullah, Abu and Abu Bakar, Mohd Hadzley and Shamsuri, Siti Rahmah and Othman, Md Nazri (2017) Effect Of Deposition Process On Properties Of Nickel-Based Aloy Clad On Cast Iron Trim Cutter Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Ibrahim, Muhamad Aiman (2023) Maintenance strategy deployment of HVAC semi hermetic compressor using failure mode effect analysis process (FMEA) method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Muhammad Hafiz Helmi (2019) Design And Analysis Of Pressing Mechanism For Imroving 3D Printing Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Nurul Atikah (2019) Design And Development An Integrated Inspection Gauge For Motorcycle Clutch Pressure Plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Siti Athirah Raihan (2016) Rear And Side Under Carriage Safety Bars For Malaysia Heavy Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim, Siti Nur Ailisa (2017) Determination of clearance for the design of bending die for looping a cable stayed support plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ida Laila , Bakhtiar (2013) DFMA Analysis Of A Water Tank Cleaning Robot. Project Report. UTeM, Melaka. (Submitted)

Idris, Muhammad Alif (2019) Developement Of Contacless Busbar Temperature Monitoring System In Low Voltage Distribution Board. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Idzham, Ibrahim (2018) Improvement For Kuih Kapit Production Through Waste Elimination And Process Upgrading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ilime, Muhammad Iqbal (2016) Temperature Monitoring Of Water Pump Relative To The Effect Of Flowrate In Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ilyana , Abdullah (2008) Autonomous Maintenance Programme On Grinding Machine For Job Base. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Intan Fatihah , Ahmad (2012) Impact Of Meeting Quality And Delivery On Customer Satisfaction For A Metal Based Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irwan, Taib (2006) Line Balancing Optimization For Single Model Assembly Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irwan , Mohamad Halim (2006) Simulation Modeling And Optimization In Manufacturing Case Study Shop Floor. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Ishak, Muhammad Asyraf (2023) Improving the effectiveness of production quality by applying planned maintenance in manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ishak, Nor Shwazni (2017) The effect of cooling slope casting on microstructure and mechanical properties of A319 alloy after processed by equal channel angular pressing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Fatin Nazirah (2019) Analysis Of Components Produced Using Wire Arc Additive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Nor Shahirah (2016) Design And Development Of Table Napkin Folding Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Salwa (2015) Design optimization of fryer basket using finite element analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Siti Khadijah (2023) Overall labour efficiency improvement using Maynard operational sequence technique at SME aerospace manufacturing company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail , Bolong (2009) Investigation On The Effect Of Heat Treatment On Fracture Toughness Of Pressure Vessel Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ismail , Ibrahim (2013) Motion And Time Study For Enhancing The Assembly Process At PHN Industry Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Izzad Jauhari , Sarlan (2009) Stamping Oil Conditioning Monitoring At Miyazu Using FT-Ir : Water Peak Monitoring For Line J. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzati, Izman (2011) A Study On Decision Scenario Of Turnaround Days Of Preventive Maintenance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Jaafar Sidek, Mohd Ani (2005) Application Quality Function Deployment (QFD) On Manual Wheelchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jafar, Fairul Azni and Arep@Ariff, Hambali and Saptari, Adi and Maslan, Mohd Nazmin and Md Fauadi, Muhammad Hafidz Fazli (2019) Modelling Disassembly Sequence Through Reverse Assembly And DPN Method For Automated Disassembly. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jafar, Fairul Azni and Saptari, Adi and Jamaludin, Zamberi and Mohd Abid, Mohd Asyadi 'Azam and Ab Rahman, Mohd Hidayat and Mat Ali, Mahasan (2019) System Configuration Of Material Handling Through Integration Of Material Supply And Inventory For Assembly Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jahari, Nor Hidayah (2017) Tool wear and wear progression of uncoated carbide in turning titanium alloy Ti-6AI-4V ELI under vegetable oil based carbon nanofiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jaiban, Floriena Erika (2017) Future of manufacturing : a study on the front-end requirements of Industrie 4.0 in Malaysia perspective. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jallil, Nurul Amirah (2017) Design Of A Corner Chair To Ease The Daily Routine Of Cerebral Palsy Kids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamalludin, Muhammad Rizuwan (2018) Integration Of Topology Optimization And 3D Printer In Designing A Bicycle Structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamaludin, Ahmad Zairy (2023) Development of 3D model and bathymetry contour maps for Sungai Melaka using surfer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamalussaid, Abdul Qahir Wahidi (2016) Establishment Of Standard Cycle Time And Production Target For The Manufacturing Of Telekom Malaysia Berhad (TM) Metal-Based Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Janghishan, Azide (2021) Conceptual design of exoskeleton chairless chair for surgeon. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jasmi, Abdul Qayyum (2014) Design and simulation of material handling system in automotive industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jegatheesan, Shalliini (2021) Comparison of cooling approach on FSW weld joint towards mechanical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jiga, Iviana (2015) Implementation of design for manufacture and assembly (DFMA) and analytical hierarchy process (AHP) in optimizing conceptual design of hand tool trolley. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Joily, Sherilyn (2019) Productivity Improvement Study Using Lean Techniques At Manufacturing Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Juari, Ab. Razak (2003) Development Of A Generic Step - Based Product Data Models In CIM Integration Framework For CAPP. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Julie Aidah, Jusin (2012) Automated Guided Vehicle(AGV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jumaan, Abdul Qawie (2018) Automatic T-Shirt Folding System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jumadil, Muhammad Muthanna (2018) IoT Based Body Temperature And Pulse Rate Measurement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

K

Kadir Naina, Nur Shahirah (2018) Fused deposition modeling and vapour smoothing process for surface finish improvement of biomedical implant replicas. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarudin, Mohd Nizam (2014) A study of product design using an integration of conjoint analysis and TRIZ (Teoriya Resheniya Izobretatelskikh Zadatch) : a case study (product hanger). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarudin, Nurul Syafiqah (2019) Development Of IoT Based And Monitoring System For Quality Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarul Ariffin , Abas (2007) Sistem Pengawasan Kualiti Kuasa Tiga Fasa. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarulzaman, Muhammad Zahin (2018) Effects Of Annealing On Punches Head And The Repurcussion On The Product Lifecycle And Cost (UTeM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Karakaran, Rubasakti (2019) Enhancement Of Productivity Using Overall Equipment Effectiveness (OEE) Through Performance Improvement In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Karami, Nur'ain Syamimi (2018) Formulation of maintenance cost forecasting model at Pejabat Pembangunan Universiti Teknikal Malaysia Melaka (UTeM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kee, Kai Hung (2016) Redesign of polar cutting workstation in paper cups manufacturing industry using ergonomics approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kee, Wan Xuan (2016) Monte Carlo Simulation Based Optimization For Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kejanindran, Govindarajoo (2012) Comparison On The Microstructure And Hardness Of GTA Welding And GMA Welding Of Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kek, Zi Xiangg (2017) Improving Stock Record Accuracy Using Mobile Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Keng, Swee Hau (2007) The Significant Of Total Preventive Maintenance Implementation–Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Aidil, Nordin (2010) Design And Analysis Of Optical Mouse Using Boothroyd Dewhurst DFMA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Azam, Buhari (2008) Productivity Improvement Through Line Balancing Method In Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Hazwan , Mohd Rasit (2015) Structural design and analysis of autonomous guided vehicle (AGV) for parts supply. Project Report. UTeM. (Submitted)

Khairul Nazemin, Mohd Yaaziz (2015) Integration Kano Model And Quality Function Deployment (QFD) Application For Design Improvement Of An Accessories Product Case Study: Umbrella. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulazdan, Nur Khairunisya (2016) Study and analysis of cognitive style towards the affective design in Kansei Engineering. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khalid Husseine , Tuah (2006) Electromagnet Torch Light Design And Development. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Khalilah, Khalid (2015) The Development Of Newly Design Arrow For Slingshot Shooting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalit, Noor Ilani (2018) A study on enterprise resource planning (ERP) system adoption towards increasing productivity : Case studies of three manufacturing industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khozari, Nur Jannah (2017) Morphological Study Using Optical Microscope Of Natural Rubber With Modified Tapioca Starch After Soil Burial Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khumairul Azri Ramdhan , Tokiman (2015) Sustainable agriculture management for palm oil productivity enhancement : a case study at Felda Wilayah Mempaga. Project Report. UTeM. (Submitted)

Kim , Ling Sheng (2008) Multi-Level Led Dot Matrix Display Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koay, Tze Wei (2018) Implementing OEE Availability Dashboard In Semiconductor Manufacturing Environment. Project Report. UTeM, Melaka. (Submitted)

Koh, Sheng Yi (2017) Design A Low Cost Hair Dryer Using DFMA Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kua, Ann Nee (2019) Overall Equipment Effectiveness Decision Support Tool For Lean Practitioners. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kua, Ning Way (2018) Integrated Overall Performance Effectiveness (OPE) And Simulation For Flexibility Enhancement During Changeover In Production Assembly Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kudsi, Muhamad Hanafi (2014) The priorities criteria of product design toward affective quality using technique for order preference by similarity to ideal solution (TOPSIS) and fuzzy TOPSIS : case study (toothbrush). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kusnan, Siti Zubaidah (2014) The Impacts Of Seven Waste Program Towards Manufacturing Industry Performance : A Study At Texas Instrument Electronic Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kusraju, Jerventh Rau (2018) Investigation Of Starch Adhesion In An Open Source 3D Printer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Lasa, Norhazirah (2017) Establishing the design guideline of customized insole via pressure distribution foot planar equipment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lasemin, Shahrul Helmi (2023) The effect of microstructure onto er308l Si WAAM structure using inoculant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lau, Ban Pin (2016) Lean Production Increase Overall Equipment Efficiency In Manufacturer Paper And Paper Product Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Kai Jun (2018) Enterprise resources planning (ERP) system implementation : A case study in Yeong Chaur Shing Paper Mill Sdn Bhd. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lau , Ong Yee (2008) Programming And Simulation Of An Arc Welding Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lau, Li Ying (2014) Design analysis of sheet metal welding joint based on transient thermal condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leang, Suh Huah (2015) Production Process Simulation As A Decision Making Tool In Aggregate Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Pei Chen (2009) An Application Of Sampling Method For Quality Control : Case Study On Roller Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Tain Sang (2005) Automated Guided Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Wen Yuh (2011) Total Manufacturing E-Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Chun Kheng (2021) Naturalistic study on communication in mixed traffic scenarios autonomous vehicle vs motorcyclist. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Ho Chung (2010) Upgrade FMS200 : Shaft Supply Module Though Human Machine Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Hui Kean (2019) Lean Six Sigma For Process Improvement Case Study At A Manufacturing Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Pei Jing (2016) Optimizing ceramic shell thickness to enhance its permeability. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Shi Guo (2016) Effect of cold arc to deflection in continuous welding of thin plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Siang Tau (2015) Implementation Of Theory Of Constraints On Buffer Management In Production Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Sing Chi (2018) Waste reduction of safety pin by implementing Kaizen activities in textile manufacturing company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Wee Pin (2015) Application of work study to reduce operations time at glove industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Weng Sum (2010) Quality Optimization in The Manufacturing Industry: An Application Case. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yeh Yee (2016) Modelling Assembly For Production Line Output : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yong Sheng (2019) Selection Of Best Plant Maintenance Strategy Using Analytic Hierarchy Process(AHP), TOPSIS-AHP And Fuzzy-AHP. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Zhen An (2018) Optimization of spray paint process on high cosmetic job. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee , Choon Seong (2007) Problem Solving Of Foot Switches Processes Using Failure Mode And Effects Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Chee Weng (2017) Reduction of balloon defects in stripping process using DMAIC approach : a case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leow, Li Ying (2017) Manufacturing Productivity Improvement In Clothing Industry Using Toyota Sewing System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leow, Mei Mei (2017) Redesign work system for productivity improvement : a case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leow, Zhi Li (2017) A development of modular automated storage and retrieval system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Letchkumar, Muniandy (2005) Just In Time Practice And Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liaw , Chin Yee (2008) Design And Development Casting Mould For Resin Based Medals. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Simon Hong Xin (2018) Process optimization with lean approach : roof tile. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Li Kiang Samuel (2007) Blender Design Improvement Through Lucas-Hull DFA Analysis. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lim, Yen San (2011) Goal Programming Approach For Production Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chiew Jie (2016) Application of triz and ANP in selecting the best concept design at the conceptual design stage for an automotive part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Chooi Jing (2016) Tools for QRM implementation in job shop environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Guo Dong (2018) Development And Analysis Of Low Cost 3D Printing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Qin Jing (2019) Characterization And Mechanical Testing Of Waste Tire Dust Modified Bitumen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Ru Pei (2016) Five-Axis Tool Path Programming Utilizing CATIA V5 For Turbine Blade : Aluminium 6063. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Samantha Reina (2018) A study on inventory management towards organizational performance of manufacturing company in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Wing Theng (2019) Navigation With Simultaneous Localization And Mapping Using KUKA Youbot : Simulational Study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Xian Kuang Benjamin (2015) Improvement Of The Snap Lock Pin Assembly Machine At Prym Consumer Malaysia Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Yee Shing (2020) Implementation Of First In First Out System In Sub-Assembly Components In Casting Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim , Ming Hao (2011) The Influence Of Welding Parameter On Butt Joint Welding Strength. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Terng Fui (2008) An Analysis Of Materials Management Of Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Wee Tat (2010) Dot Matrix LED Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Fung Chien (2010) Project Management : A Simulation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Stephen Kie Kai (2019) Design And Development Of Position Control For Robot Gripper Mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Linus Michael, Stephen Mirando (2012) Comparison On The Microstructure And Hardness Of SMA Welding And GMA Welding Of Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Suet Leng (2018) Productivity Planning To Reduce Waste By Simulation In Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Ting Pohg (2017) Profiling design preferences using Bezier curve towards Kansei engineering. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loh , Sai Chun (2011) Implementing SPC Tools In A High Precision Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lokman, Abdullah and Mohd Hisham, Nordin and Muhammad Hafidz Fazli , Md Fauadi and Mohd Noor, Akmal Rosli (2008) Automated Product Inspection System Using Radio Frequency Identification (RFID) Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loo, Kin Hoe (2012) Six Sigma Dmaic Implementation At Manufacturing Company. Project Report. UTeM, Melaka Malaysia. (Submitted)

Loo, Heoy Shin (2015) Bone scaffold design selection by using analytical hierarchy process (AHP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loong, Win Ann (2011) Design And Analysis Of Anti Crimping Roll Position Using CAD Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Shee Teng (2020) Vision Inspection System For Sorting Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Low , Kuan Chuen (2008) An Analysis Incoming Quality Control Of Material In Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lujah, Brendan Steeve (2022) Analysis on success factors of lean six sigma implementation in SME and it’s relevancies in era of pandemic covid-19. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

M

Maadis, Mohd Shahril (2016) Puyuh Farm Environment Control And Alert System Using Microcontroller And GSM Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mageswaran, Raveen Kumar (2022) Re-evaluating standard operating procedures for haberdashery product using elemental breakdown analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mageswaran, Renugah (2017) Development Of Water Resistant Particleboards From Rice Husk. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahadi , Mustafa (2009) A Feasibility Study On Design For Environment And Design For Sustainability Application In Boat Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahani , Mohd Yusof (2006) Development Of 3 Fingers Robot Hand Gripper. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Maharun, Muhammad Adib (2019) A New Design Optimization Of Lightweight Lower Control Arm For B-Segment Passenger Car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahrob, Noramilza (2017) Welding initiation at the entry stage of Bobbin Friction Stir Welding (BFSW). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Maidin, Shajahan and Alkahari, Mohd Rizal and Akmal, Suriati and John, Wong Huang Ung and Mohamed, Ahmad Syafiq (2019) Vacuum System Assisted Fused Deposition Modeling To Improve Fracture Toughness And Surface Finish. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Makong, Najil (2015) Design and fabrication of welding jigs and fixtures for Fkp lab. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Malaya, Nur Iylia (2019) Productivity Improvement Through Work Standardisation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mamat, Umie Rosmida (2017) Quality improvement using factorial design (a case study in manufacturing company). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Manap, Nur Ain Najwa (2023) Increase production capacity by performing assembly line balancing study in food and beverages manufacturing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mani, Nirmessini Maselah (2016) Application of kaizen to prevent slip of defective products to internal customer in automobile manufacturing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Manikam, Viisvan (2022) Development of low-cost portable microscope. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mar'emazairy , Omar (2007) The Implementation Of Total Productive Maintenance (TPM) At High Volume Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masazlan, Siti Aisyah (2018) Impediment factors of adopting advanced technology among electronic industries in Johor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Masri, Muhammad Anas Farid (2022) Performing new material for lower control arm product vehicle using finite element analysis method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Adam, Nur Syuhada (2017) Setup time reduction of snap fastener machine by implementing single minute exchange of die. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Nasir, Khairul Azwan (2018) Quality improvement by implementing Kaizen activities in textile manufacturing company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Noor, Noraina Alia (2015) A simulation-based approach to decision support for lean-practitioners. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Yamin, Ahmad Kamal (2018) Exercise 5: Creating a 3-D Solid Model in AutoCAD 2017. [Video] (Unpublished)

Mazlan, Ikhwan Fakhrulhaziq (2017) Effect Of Different Welding Parameters To The Mechanical Properties Of Spot Weld. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan Supawi, Nurul Amiza (2019) Investigation On Incomplete Fill Problem Of Quad Flat Package In Semiconductor Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Raizi, Muhamad Edhan (2020) Development Of A Spin Grind Dryer For Seaweed Powder Processing Using Total Design Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Zahir, Saiful Azhan (2015) Wear behavior and corrosion resistance of nickel coatings electrodeposited on aluminum alloy 7075 substrate via various current density. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md. Liza, Rossyana (2016) Minimize Waste At Production Line By Implementation Lean Manufacturing Tools (Poka Yoke). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Yusof, Amira Shairah (2023) Analysis on the effect of process configurations on manufacturing system performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Meor Mohd Azwan , Sahran (2010) Application Of Value Stream Mapping (VSM) In Manufacturing Industry (Case Study : Jati Beringin Sdn. Bhd.). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mesri, Masturah (2019) Curing Characteristics And Mechanical Properties Of Styrene Butadiene Rubber (SBR) Filled With Industrial Waste Derived Ashes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mhd Said, Shahidatul Aida (2019) Production Improvement Of A Food Manufacturing Process Through Lean Six Sigma Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Abdul Rashid (2018) Optimization Of Dimensional Accuracy Of Fused Deposition Modeling (FDM) Printed Part Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Balqis (2018) Lean implementation in Malaysia's organizations: A narrative study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Effendi and Sulaiman, Mohd Amri (2016) Simulation-based approach to Lean Manufacturing. Technical Report. Penerbit Universiti,UTeM.

Mohamad, Mohamad Roszulfadli (2016) Analysis Of Performance For Cart Gantry Crane System Using Scheduling Algorithm Via Controller Area Network (CAN). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Mohamad Roszulfadli (2016) Analysis Of Performance For Cart Gantry Crane System Using Scheduling Algorithm Via Controller Area Network (CAN). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Nor Rashidah (2014) Redesign and efficiency analysis of small scale production line. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Nor Rizan (2014) Design of lab-scale pre-pregger machine for in house production of pre-preg material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Anuar, Zainuddin (2007) Analysis of Surface Integrity of Aero Composite Material in Drilling With High Speed Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fadzli, Mat Jusoh (2006) Simulation Study On The Performance Of Flow Shop Scheduling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faidzal, Razali (2010) Productivity Improvement The Implementation Of 7QC Tools At Communication Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fikri, Mohamad Jaya (2015) Production Line System Enhance Based On Modeling And Simulation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Firdhaus , Mohamad Lajis (2008) Performance Analysis Of Six Axis Industrial Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Hamdan, Yadzi (2007) Merekabentuk Sebuah Kerusi Tulis Yang Sesuai Digunakan Untuk Pengguna Bertangan Kiri Dan Kanan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Harani, Muhammad Fathullah (2022) 5S and autonomous maintenance for lean practitioner at an aerospace manufacturing : A case study. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohamad Harani, Muhammad Fathullah (2022) Design improvement and vibration analysis of a fabricated pipe bevelling jig for welding preparation. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohamad Isa, Fatin Nurdiyana (2019) Line Balancing Of Pressure Relief Valve (PRV) Assembly Process For Enhancing Producivity And Efficiency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Kadim , Suaidi (2011) Compact Multiband Antenna Design For RFID Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Mukhlis, Abu Bakar (2010) Application Of Facility Layout Software : Case Study At Isuzu Hicom Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nazeeb , Bolhassan (2006) Pulley System Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Noor, Siti Amirah (2015) Productivity enhancement by Overall Equipment Effectiveness (OEE) improvement in Harberdashery industry: a case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Norani, Nor Ayu (2018) Design A Non-Electrical Table Fan. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Pzil, Nor Faezah (2017) Design And Analysis Of Thixoforming Alternator Housing Using Advance Casting Simulation Software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Sabri, Mohamad Fahmi Hakim (2022) Study on riverwater effect on mechanical properties of aging FS3300PA SLS material with different coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Tajuddin, Ramli (2015) Developing A Lego-Bot 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Wazir, Azmil Arif (2020) Design And Development Of A Low-Cost Cyclone Dust Collector System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zahuri, Jamil (2015) Design And Analysis Of Base Assembly For Flange Resurface Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zawawi, Abdul Razak (2015) Design Of Automated Guided Vehicle (AGV) For Workpieces Transportation In Manufacturing Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zulhilmi, Abdullah (2011) Computer Integrated Manufacturing (CIM) - Development Of Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed, Hazim (2016) Preliminary investigation of visual features for AGV localization application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Fauzi, Muhamad Fakhruddin (2015) An emotional design of product using kansei engineering : mathematical approach towards design profile. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Hairi, Mohamed Azelan (2016) Mircostructural morphology and mechanical properties of rheocast A319 aluminium alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Isa, Muhammad Fizwan Hakimi (2023) Development of IoT-enabled real time machine status monitoring approach for cloud manufacturing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad, Muhammad Nur Azizi (2016) Development of a framework for remanufacturing of LCD monitor at the disposal stage. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad Aizrulshah, Kamaruddin (2013) Design And Optimization Of Runner And Gating Systems For The Permanent Mold Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Asa'ari , Rahmat (2009) Study Of The Epoxy Resin Bonding Process Of Aluminium Alloy : Chemical Pickling Process (Sulphuric Acid). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Faiz, Samsuddin (2008) Proses Penghasilan Acuan Dari Rekabentuk Produk Sehingga Terhasilnya Produk Dengan Penggunaan CAD/CAM (E-Manufactuing). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hadi , Abd Halim (2009) Maintenance Strategy Development (MSD) Using Reliability Centered Maintenance In A Power Plant : A Holistic Study. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Khabib , Khalib (2008) Study On Boronizing And The Kinetics In Low Alloy Tool Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Rozainee , Othman (2007) FMS 200 Output Count Display. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohammad Shokri, Mohammad Amirul Syafeeq (2014) Implementation Of Smart Inventory Management System For Efficiency Enhancement : A Case Study Of SmartBin In Cohu, Inc Semiconductor Equipment Group, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syafiq , Mohd Sarif (2015) The application of time compression technologies of an artifact in Malay carving (mould of 'Papan Pemanis'). Project Report. UTeM. (Submitted)

Mohammeed Azizi , Rudy Abdullah (2009) Design Improvement On A Product Using DFMA: Industrial Machinery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Abd Wahab, Muhamad Aizat (2018) Pinless Friction Stir Welding For Weld The Thin Plate SPCC. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Aizuddin, Abd Razak (2009) Design And Product Development Of Product (s) Through Concurrent Engineering Tools And Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ali, Noor Khairul Nisa (2017) Improving Mechanical Properties Of Fused Deposition Modeling Printed Part With Optimized Parameter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ali Piah, Hidayah (2021) Influence of silane solution pH on the rubber-metal bonding. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Amer, Muhammad Syahrul Nezar (2017) DOE Approach In Determination Of The Optimum Welding Parameters For Three Layer Spot Weld. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asri, Nor Hafiza (2018) The critical success factors of lean implementation towards performance improvement in manufacturing industry : A case study in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Azinuddin, Ismail (2009) Kajian Model Bentuk Piawai Menggunakan Prototaip Pantas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi, Kasmuri (2011) An Investigation Of The Hot Dip Galvanized Product (Stay Plate) At Jati Beringin Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azmel, Aziz (2008) Joining Performance Of Aluminum T6063 Using GMAW Welding. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Badli , Ramli (2009) Redesign Of Nail Clipper Through BD Design For Assembly Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Basir, Mohamad Faris (2017) Determination Of Dimensional Accuracy Of A Part By Silicone Rubber Mold Using Taguchi Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Basir, Nur Hazirah (2017) Study On Design For Manufacturing Of Benchmarking Design Using Fused Deposition Modeling An Entry Level 3D Printer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Dzuhairy , Hussain (2006) Kajian Sifat Sambungan Bahan Logam Melalui Proses Kimpalan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Fadzil, Muhammad Hafiz (2021) Condition monitoring and analysis of additive manufacturing machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Syahirah (2017) Design Of Modular Smart Pick & Place Automation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzli, Talib (2013) Design And Analysis Of Production Tooling Using Computational Fluid Dynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Ahmad (2010) Eliminating Waste : Enhancement Of Productivity Of Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairuz , Suliman (2006) Product Development Using QFD Methodology-A Case Study Of Car Wipe. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Fairuz Nizam , Ibrahim (2007) The Development Of Modular Product Design : Foldable Chair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizairi, Muhammad Faiq Aqil (2019) The Effect Of Ni-TiO2 Coating On Different Substrates. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Mohd Pauzi (2013) Tailored Orbital Welding Of Dissimilar Stainless Steels Material. Project Report. UTeM, Melaka. (Submitted)

Mohd Fariz, Sabtu (2009) Application Of Design For Environment In Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazil, Mohammad Hanis (2019) Overall Equipment Effectiveness Improvement Through Single Minute Exchange Of Die Implementation: A Case Study On Stamping Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Ibrahim (2010) Design Rules For Casting Process Using CAD Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Ramli (2010) Rapid Prototyping On Biomanufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Samsudin (2016) Experimental study of sheer strength of sheet metals. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Firdaus , Ibrahim (2010) Design Rules For Casting Process Using CAD Tool. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Firdaus , Ramli (2010) Rapid Prototyping On Biomanufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fozi, Airini An Nadrah (2017) Automated Guided Vehicle (AGV) System Based On Simultaneous Localization And Mapping (SLAM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fuzi, Muhammad Zahid (2019) Lean Tools Application For Productivity Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ghazali, Athirah (2015) A case study of causes of manufacturing losses in palm oil mill. Project Report. Universiti Teknikal Malaysia Malaysia, Melaka, Malaysia. (Submitted)

Mohd Hadar, Jaafar (2009) Development Of Distributed Control System Using Servo Driven Position Control Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haffizzi , Md Idris (2007) Design A Casing For Air Pressure Plug Rapid Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Mohamed Hassan (2011) An Improvement To Reduce Misdetection Of Arc And Spatter In Welding Process By Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Mohammad Noor (2009) Quality Improvement By Using Taguchi Method In Disk Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Abd. Rahman (2008) Utilization Of Oil Palm Shell Powder (OPSP) As Filler In Acrylonitrile-Butadiene-Stryrene (ABS) Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Mohd Ismail (2010) Improvement Of Medical Product Through Design For Environment (DfE) Methodology : A Case Study Dialyzer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizudin, Hashim (2015) Design And Analysis Of Blanking And Bending Die For Thimble Open Small By Using ANSYS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizzol, Karim (2012) Designing And Fabrication Modular Products With The Incorporation Of DIY Assembly Method (Study Table). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanafi , Mohd Sadri (2008) Manufacturing Modeling And Simulation In A Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hariz Nasfu , Mohd Azmi (2009) Study Of Epoxy Resin Bonding Process Of Aluminium Alloy : Chemical Pickling Process (Hydrochloric Acid). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Hashim, Syazwani (2015) A methodology to develop ontology of additive manufacturing using formal attributes specification template (FAST). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hasni, Muhamad Ezmer Syazni (2017) Preferences Of Profile Design Product Using Kansei-Pairwise Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hazuan , Mohd Zawawi (2009) Design And Analysis Of Electrical Iron Using Boothroyd Dewhurst DFMA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Idain Fahmy, Rosley (2007) Kajian Terhadap Rekabentuk Raifal Tempur Baru Untuk Angkatan Tentera Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Idrus, Muhammad Nurfikri (2017) Analysis On Anti-Hunchback Device By Using Electromyography (EMG). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ikhwan Hafiz , Md Noor (2009) Six Sigma (DMAIC) Implementation In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Irfan , Mohd (2006) Controlling AGV Via PC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Isa, Muhamad Salihin (2020) Design Of Portable Power Assisted Towing Mechanism For Motorcycle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ishammudin, Mohd Yunus (2008) Design And Development Of Grass Cutting Machine Using DFMA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izhar, Bahru (2006) Management And Improvement Of CAD/CAM System - Steelcase Artwright Manufacturing Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izuwan, Ismail (2015) Mereka Bentuk Sistem Pengumpulan Madu Kelulut Untuk Kegunaan SME. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izwan , Zaini (2007) Design For Manufacturing And Asembly (DFMA) Of Industry Product. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Jamil, Jamilah (2015) Quality improvement using factorial design: a case study in manufacturing company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Jefri , Amir (2007) Assessment Of Fuse Deposition Modeling (FDM) Machine And 3D Modeling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Johari, Ahmad Syahir 'Izzat (2016) Reka Bentuk Dan Pembangunan Alat Pengasah Pisau. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Juzaili, Lokman (2010) Mechanism Development Of Gripper For 5kg Payload. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Juzaili , Lokman (2010) Mechanism Development Of Gripper For 5kg Payload. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Khairol Anuar, Nur Fathana (2015) Design and analysis the optimum sprue size for single cavity plastic name card holder plastic injection molding. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Khairul Adli , Mohd Zin (2009) The Investigation On The Fatigue Crack Growth On Welded Pressure Vessel Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Ashraf , Ghazali (2014) A study on customer satisfaction using quality function deployment (QFD), kano approach and theory of inventive problem solving (TRIZ) toward product quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairuldin, Hassan (2014) A New Approach For Industrial Product Inspection Based On Computer Vision And Image Processing Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairulzaman , A Rahman (2009) Automated Guided Vehicle Using Line Following Detection. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Khusairi, Muhammad Luqman (2019) Optimization Of Recycle Water Jet Sand Moulding Composition For Sand Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khuzaimi, Mohd Salleh (2012) Processability And Compatibility Analysis Of Thermoplastic Elastomer Filled Reclaimed Rubber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Manshur, Aminuddin (2016) Design Of Automated Guided Vehicle Using Programmable Logic Controller. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Mohd Maraie, Mohamad Hadihafizul (2019) Application Of Total Productive Maintenance (TPM) To Minimizing Quality Problem In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Muammar Gaddafi, Ab Aziz (2011) Mechanism Development Of Flexible Worktable. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nafis , Mohaizi (2008) Product Design Evaluation Of Lucas Hull DFMA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib, Ali Mokhtar and Ahmad Yusairi, Bani Hashim and Mohd Nazrin, Muhammad and Nik Syahrim, Nik Anwar and Nazri Huzaimi, Zakaria (2011) Design And Development Of Sensor Array Consist Of Piezo Element For Fluid Jet Polishing Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nawi, Mawaddah (2015) Design of safety system for comau articulated robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nazili , Yaacob (2009) Design And Development Of Pneumatic Gripper For Comau Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Nizam, Nur Aqilah (2023) Ergonomic design of crayons using 3D printing mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nizam , Abu Seman (2007) Design & Implementation Of Pick & Place And Storage Systems Application Using Fanuc Robot & Electro-Pneumatic Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor, Zuraida (2017) Development Of Vertical Milling Machine Educational Kit Using Various 3D Printing Methods To Assess Rapid Prototyping Process Capability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor, Nur Madiah (2018) Investigation on flexural and compression strength vacuum assitsed fuse deposition modeling system specimens. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nor Hayat, Abu (2010) Develop Product Sustainability Improvement For Automotive Part : A Car Wiper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Hayat , Abu (2010) Develop Product Sustainability Improvement For Automotive Part- A Car Wiper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Norazali, Zainal Abidin (2011) Machining Development Of A Tripartite Rubber Die Holder. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mohd Norazizul Fadli, Abu Bakar (2006) Manufacturing Modeling And Simulation In Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rafiq, Fara Nadia (2015) Design of pneumatic gripper for comau articulated robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Rajhan, Said (2006) Design And Analysis of Manufacturing System Using Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razali, Muhamad (2013) Deposition And Characterization Of Tin Coated PVD Sputtering Of Magnetized Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Raziff, Muhammad Shahmir (2016) Designing a friendly campus "Learning Environment" model for FKP students using product service system concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ridhuan , Mohd Noor (2008) Boronizing Effects On Impact Toughness Of Low Alloy Tool Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Ridzuan , Mustapha (2007) DOE Based Modeling In Machining Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rozlan, Nur Hidayah (2019) Design And Development Of A Quality Inspection Gauge For Checking A Motorcycle Piston. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Safeai, Nur Maizatul Nadia (2016) Degradation Of Tensile Properties Of Natural Rubber (NR) Composite And Tapioca Starch (TS) Under Soil Burial Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Safwan, Mohd Aszemi (2015) The Design And Development Of Portable Electroless Nickel Plating Apparatus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saib, Khairul Anwar (2017) Design And Development Of Packaging Machine For Liquid Soap. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Salim, Muhammad Ammar Luqman (2016) Accuracy and repeatability analysis of industrial robot under loaded conditions and various distances. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Salleh, Mat Yusop (2005) Auto Retractable Roof. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salleh, Shahrinna (2015) Improvement of overall equipment effectiveness in a haberdashery manufacturing company for productivity enhancement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sarmin, Mohd Khairul Anuar (2011) A Feasibility Study Of 3D Printer Parameters Optimization By Using Cow Bone Powders. Project Report. UTeM, Melaka. (Submitted)

Mohd Shafadilah , Mashor (2009) Online Monitoring And Control From A Database Server For Manufacturing System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Shah Fahmi , Zainuddin (2009) A Study On Welding Defects Of Pressure Vessel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Shahardey, Abd Rahim (2013) Design Of Die For Hot Press Forming In Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahriman, Sutan (2005) Product Development Using DFA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahzudin, Saleh (2012) Design And Analysis Of Step Clamp Using Sand Casting And Rapid Prototyping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shukor, Salleh and Hanizam, Hashim and Mohamad Haidir, Maslan and Wahyono Sapto, Widodo (2011) Analysis Of Springback Phenomenom In Aluminium Sheet Metal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shukree, Saibu (2010) Development Of Material Requirement Planning, A Case Study In Metal Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Soufhwee, Abd Rahman and Lokman, Abdullah and Hanizam, Hashim (2011) Productivity Improvement On Packing Process In Mushroom Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Suhairi Irwan, Zahari (2008) Mereka Bentuk Sebuah Alat Menoreh Getah Yang Berkuasa Enjin Kecil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Supian, Nur Amira Zulaikha (2023) Design and fabrication eco friendly 3D printed bicycle cup holder. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Syafiq , Ahmad Roseli (2010) Design Improvement Using Design For Manufacture & Assembly (DFMA) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq Shaik, Abdul Aziz (2013) Development Of Cooling System In Hot Press Forming For Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq Zhafri, Mohamed Zon (2011) Baby Walker With RFID System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahiran , Mohamed (2010) Automatic Box Packing Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahiran , Saramudin (2015) Investigation of defects in transfer moulding process of the automotive glass run channel specifically for the corner joint. Project Report. UTeM. (Submitted)

Mohd Tajwi, Nurul Akmar (2016) Design and development of cylinder LPG trolley for domestic use. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Tarmizi, Muhammad Syafiq (2017) Design And Development Of Portable Pineapple Leaf Fibre Machnice In Pineapple Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yatim, Maria De Valda (2016) Enterprise Resources Planning : A Case Study In Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusof, Nur Qulbiah (2015) Eliminate Waste At Production Line By Implementing Kaizen Approach To Enhance Product Quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zafirdan , Mat Amin (2007) Design And Fabricate Vise Using CAD-CAM System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Zaki , Sharifuldin (2009) Stamping Oil Conditioning Monitoring At Miyazu Using Ft-Ir : Water Peak Monitoring For Blanking Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zamri, Mohd So'ad (2009) DFA Using Computer Program. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Zawawi, Nurafiqah (2019) A study on the adoption of lean management techniques: Case study in bakery industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zhafri, Mohd Yaacob (2010) Study And Implementation Of Speed Chess Clock. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zuhri , Mohamed Yusoff (2007) A Case Study Of Rapid Prototyping Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhilmi, Ismail (2012) Appliction Of Value Stream Mapping (VSM) In Cable Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Azwan , Mohammad (2008) Electromagnetic Chip Collector (EMCC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muazam Shah, Mohamad (2005) Design A Patient Transfer System Using QFD Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhaizad , Muhiyddin (2010) Production Yield Analysis Of An Automotive Component Using General Linear Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Afiq, Kamal Arifin (2015) Design And Development Of Wooden Mold Base For Educational Kits. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Akmal , Ashaari (2008) Investigating The Welding Parameters Performance Of Spot Welding Process. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhamad Alif , Abu (2010) Motorcycle Anti-Theft System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Asri, Zainul (2006) Application Of Design For Assembly Methodology On Automotive Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Azamuddin, Alia Amira (2019) Mechanical Properties And Optimization TIG Weld Parameters On Aluminium Alloy 5052. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Azim , Azami (2009) Design Of Automatic Tool Changer For Welding Gun Tip. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhamad Hanif , Zahari (2015) Mistake proofing jig a method to improve Risk Priority Number (RPN) in process FMEA. Project Report. UTeM. (Submitted)

Muhamad Husni , Hussein (2015) Development of knee braces for osteoarthritis patient. Project Report. UTeM. (Submitted)

Muhamad Izwan , Mohd Yahya (2016) Study Of Thermal Stress Effect On Ester Oil Using Breakdown And Fourier Transform Infrared Spectroscopy (FTIR) Test. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhamad Nabil Fikri, Ahmad Jawahir (2011) Quality Improvement Analysis By Using Taguchi Method In Small Medium Enterprise (SME) Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Sukri, Khairiah (2022) Productivity improvement by embedded value stream mapping (VSM) and simulation in assembly manufacturing company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Syahrir, Ibrahim (2006) Implementation Of ISO 9001-2000 Inn Higher Education Institutions (KUTKM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Zulhayyie, Che Sarif (2011) Database For Potential Failure Mode And Effect Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Adeeb, Mokhtar (2008) Development Of Housing Pattern Using Rapid Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afdhal, Nazan (2015) Design And Development Kossel Mini 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Amir, Mohd Rohzaini (2015) The Development Of Slitting Sheet Metal Machine For Wire Mesh Using Total Design Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ammar, Hassan (2011) The Effect Of Process Conditions In Vacuum Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asy Syaheed, Abdullah (2013) Effect Of Resin Ratio On Mechanical Properties Of Resin Bonded Sand Mould. Project Report. UTeM, Melaka. (Submitted)

Muhammad Ayub, Md Zain (2015) Development Of Control System For MAP 203 Using Human Machine Interface (HMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Azlan, Arshad (2014) Wireless Production Monitoring System Using ZigBee. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faisal, Musa (2012) Development Of Differential Steering System For A Microcontroller Based Motorized Walking Aid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz, Mispul (2008) Material Handling System Development In Factory Using Catia V5 Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fansuri , Muhyaddin (2010) Design For Environment (DFE) Improvement On Electronic Product : A Case Study On A Mobile Phone Housing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Farhan , Mohamed Khalid (2015) The development of in vivo post circumcision (analysis on market testing). Project Report. UTeM. (Submitted)

Muhammad Fauzi, Muslih (2015) Automated Guided Vehicle System (AGV) System With Flexible Direction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus, Mohd Razali (2012) Kajian Parameter Terbaik Untuk Robot Kimpalan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus , Mustapa (2010) Jawi Characters DOT Matrix LED Sliding Text Displayer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fuad, Mohamed Zan (2011) Study And Analysis Quality Satisfaction In Service Industry (Damansara Specialist Hospital). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafiz , Ahmad (2009) Case Study : A Study On Overall Equipment Effectiveness At Electronics Manufacturing Company. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Hafizan , Yosri (2007) Mobility Sub Sytem For Robotic Oryza Sativa Pesticide Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafizuddin, Jumali (2015) Development Of Microcontroller-Based Data Acquisition System For Environmental Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haikal , Shamshuri (2015) Poka Yoke jig implemantation to improve productivity at manufacturing industry. Project Report. UTeM. (Submitted)

Muhammad Hakim, Ahmad Suhaimi (2016) Dynamic behaviour of biocomposites. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Hannan, Kamarzaman (2013) Study And Analysis Of The Engineering Quality Feelings Based On Affective Response To Dimensional Integration Of Product Shapes Design Case Study [Product - Spectacles]. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hazwan, Arzmi (2013) An Integration Of Affective Engineering In Product Design Analysis - [The Using Of Kano Model With Kansei Engineering For Evaluating The Design Product) - Case Study] (Product - Pen). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Helmi, Jamil (2010) Automatic Part Feeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Husnan , Zainal Abdin (2013) Enhancing Material Supply System For Improving The Flow Process Of Assembly Line. Project Report. UTeM, Melaka. (Submitted)

Muhammad Iqbal, Sazali (2013) Value Stream Mapping Using Simulation Towards Lean Manufacturing At Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izwan, Isa (2009) Statistical Analysis Of The Rapid Prototyping 3D Printer Process To Determine Accuracy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Jazmi , Ibrahim (2009) Development Of Spreadsheet Based Programming For Maintenance Management Systems. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Khairul Aizat , Mohd Radzi (2009) Design Improvement On An MPOC Using DFMA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Khairul Anwar, Roslan (2015) Analyse, Develop And Fabricate New Tactical Knife For Military Using Long Forgotten Keris Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Musfarezal, Mustafa (2015) Development Of A Low Cost 3D Scanner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nabil, Ab Kadar (2015) Simulation Of Crash Impact On A Formed Sheet Metal Using Hypercrash And Radioss. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nazrul, Mohd Yusoff (2015) Product Design Improvement Using Design For Manufacture And Assembly (DFMA) Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nor, Nor Nazihah (2016) Development of overall performance effectiveness (OPE) at the semiconductor industry : A case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Nur Izhar, Abd Rahman (2015) Design And Development Of A Hand-Arm Support : Lifting Wheelbarrow And Loading Banana Fruit Into The Wheelbarrow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nurul Hafiz , Abdul Malik (2008) Design And Model Making Of Forming Dies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Qasrin Asyraf , Ahmad Shabri (2015) Design and simulation of investment casting mold for obsolete automotive part. Project Report. UTeM. (Submitted)

Muhammad Ridhwan, Mohd Talib (2012) Studies On Dynamic Behaviour Of The Automotive Door Locking System During Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shukri, Muhammad Zaim Shahmi (2019) The Evaluation On The Effect Of Aging To The Interfacial Bonding Of Pcb Soldered Using SAC305. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Syafiq , Samsudin (2011) Development Of Process Flow And Standard Operating Procedures For Madeena Syrup Process Controls. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq , Ahmad Tarmidi (2010) Development Of Statistical Process Control Software For Small Medium Industries (SMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syazwi, Mohd Faudze (2015) Investigation Of Characteristics And Applications Of 3-D Printer Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zahid , Kamarudin (2015) Work study analysis to improve productivity at manufacturing process company. Project Report. UTeM. (Submitted)

Muhammad Zufar, Jurij (2011) Computer Integrated Manufacturing (Continuity Electrical Board Checker). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Munirah , Othman (2007) Study On Carburizing And The Kinetics Of Low Alloy Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Murugan , Nagaretinam (2005) Implementing Kobetsu Kaizen Steps In A Manufacturing Company Goodway Rubber Industries (M) Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa , Juman (2012) STUDY ON MACHINE PERFORMANCE FOR PRODUCTIVITY IMPROVEMENT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa Azizul, Fatin Nadhirah (2018) Moisture Content Monitoring System For Biomass Feed Stock By Using Android System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mustafar, Ahmad Al Idrisi (2018) Parameter Optimization In 3D Printer Recycle Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

N

Na'ain , Shari (2009) Stamping Oil Condition Monitoring At Miyazu Using FT-iR. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nablan, Muhammad Amirullah (2019) Achieving Work Balance Through Simulation Modelling And Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nadzri, Muhammad Asyhraf (2018) The Investigation Of Mechanical Properties Of Four Layer Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nadzri, Zaty Zhafarina (2019) Characterization And Mechanical Testing Of Elastomer Modified Bitumen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Najamuddin, Mohammad Fahim Ikhwan (2021) Carbon Emission Reduction Strategies Through Cleaner Production At Manufacturing Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Najwa , Khalid (2007) Programming Of Vision System For Computer Integrated Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Naqisyah, Nazer (2015) Design Optimization Of Drain Cover Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nas Mustaqim Walad, Ahmad (2015) Design And Development Of Customized Drinking Bottle For SME. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasarudin, Faizun (2017) Improving Manufacturing Process Through Lean Implementation In Small Scale Manufacturing Workshop. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nashrul Adzim , Nashruddin (2009) Obstacle Avoidance Method For Automated Guided Vehicle (AGV). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nasiruddin, Khairuddin (2008) Fabrication Of Silicone Rubber Mould For Vacuum Casting Machine For Various Part Geometries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasrudin, Nur Fatihah (2017) The Optimization Of Welding Parameter For Joining Mild Steel 1020 Using ABB Metal Inerts Gas (MIG) Robot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nassiruddin, Muhammad Amirul Adli (2019) Design And Development Of An Integrated Quality Inspection Gauge For Width Slot Spur Gear. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nazeri, Muhammad Zulhilmi (2020) Electrochemical Behavior Of Nickel Aluminide Based Alloy Deposited Using Deep Eutectic Solvent. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nazman, Nurul Afidah (2021) Reducing production wastes at continuous process using lean manufacturing concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nazri, Syarifuddin (2017) Development Of Monitoring System In OPerating Theater Using Arduino Ethernet Shield. Project Report. UTeM, Melaka. (Submitted)

Nazri, Syarifuddin (2017) Development Of Monitoring System In Operating Theater Using Arduino Ethernet Shield. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Neoh , Thiam Hwa (2013) Design and simulation of die and punch for sheet metal on bending. Project Report. UTeM. (Submitted)

Ng, Jing Yee (2011) Study And Analysis On Customer Satisfaction : Case Study In Service Company (Bank). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Yuet Wan (2009) A Student On Basin Frame Production : A project Management Approach. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ng, Yuet Wan (2008) A Study Of Basin Frame Production : A Project Management Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Boon Yong (2018) Development of maintenance monitoring system for Faculty of Manufacturing Engineering. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Mee Chin (2016) A study to determine the best combination of FDM process parameters using taguchi method to optimize the build time and surface quality. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Rui Ying (2019) A Study On Selective Laser Sintering Behaviour And Processing Of Polymer Powder Mixtures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Shu Juan (2015) Optimization Of Moulding Composition For Quality Improvement Of Sand Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Siew Man (2019) Characterization And Gravimetric Analysis Of Exposure From Selective Laser Sintering (SLS) PA12 Nylon Powder Handling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Teck Ming (2018) Quality improvement in manufacturing industry using Six Sigma methodologies. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ngeow, Sook Chin (2015) A Comparative Study On The Design Efficiency Of Products Using DFMA Methods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Ahmad Khan, Nik Ahmad Nazran (2023) Development of batik jig for heritage preservation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nik Aziah , Abdul Aziz (2010) PIC-Based Temperature Monitoring System Via CAN Bus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Faizal, Wan Zulkifli (2008) Oil Particle Analysis-Miyazu 1. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Nur Faeezan , Nik Yusoff (2015) Second used packaging. Project Report. UTeM. (Submitted)

Nik Zubaidi, Nik Mahmood (2012) Designing And Fabrication Modular Products With The Incorporation Of Diy Assembly Method (Shoe Rack). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nithya , Selvakumaran (2009) Investigation Of Shot Peening On The Fatigue Strength Of Aluminium Alloy. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noh Aideal, Abdul Samad (2005) Parameter Optimization In The Injection Molding Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Adawiah, Ab Razak (2011) Correlation Between DFMEA And Process Capability At Automotive Part Supplier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Adibah, Mat Isa (2012) The Effect Of Phenolic Resin And Hardener Percentage On Mechanical Properties And Loss On Ignition Resin Bonded Sand Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Aizah , Mahat (2011) Surface Integrity Study In EDM Die Sinking Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Asmah, Arshad (2010) Design And Fabricate An Optimize Mechanism For Fruit Plucker To Be Commercialized. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Hisham, Muhammad Nabiil (2022) Fabrication a small-scale filtration unit for pre-treated oil sample. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Noor Masnira , Muhammed Salleh (2009) Analysis Of Quality Product By Using QFD Method And Satisfaction Criteria On Consumer Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Rawaida , Omar (2012) Redesign Of Perforator Through Integration Of Ergonomics Approach And Quality Function Deployment (QFD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Syarida , Abdul Rahman (2009) Papan Partikel Daripada Sekam Padi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorazmie Afzam , Muhamad Zaki (2009) Use DFMA Methodology To Analyze On Car Wiper System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorfazlyanisyuain , Zainal (2015) Application of lean manufacturing using value stream mapping. Project Report. UTeM. (Submitted)

Noorhayati , Shaharudin (2008) Design Of Safety System For Industrial Robots Works Cells. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noorzilaiwati , Rosli (2006) Characterization Of Fiberglass Impregnation. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nor Adila, Nordin (2005) Application Of Lean Principle In Manufacturing Companies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Afandi , Sharif (2007) Manipulator Design For Robotic Oryza Sativa Pesticide Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Affendy, Norizan (2013) A Study And Analysis Of Product Design And Development Using Kansei Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Aslan, Nur Amirah (2019) Weld Quality Comparison Between Fusion Welding And Solid State Welding On AA1100. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Asmaa Alyaa, Nor Azlan (2013) Assessment Of Manufacturing Facility Layout Using Systematic Layout Planning (SLP) Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azlin, Ali (2010) A Case Study Of Kaizen Implementation In SMI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Diana, Hashim (2008) Time Study Method Implementation In Manufacturing Industry. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nor Fazielah , Darwis (2013) Preliminary Investigation Of Laser Joining. Project Report. UTeM, Melaka. (Submitted)

Nor Ismawati , Natilan (2007) Design And Development Of Computer Program To Determine 2D Robot Workspace And Safe Working Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Izati , Md Salleh (2007) Development Of Standard Time Utilizing Work Method And Time Measurement In QC Department At A Textiles Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Mohd Uzair, Norsahperi (2014) Simulation of automation of pen capping process for EK300 at Sparkle Precision Sdn. Bhd. Project Report. UTeM. (Submitted)

Nor Rafika, Nor Hamid (2013) Identification Of Intermetallic Compound At Cu Wire – Al Bond Pad Interface By Using X-Ray Diffraction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Shahirah, Aladdin (2013) Productivity Improvement Through Application Of Lean Manufacturing Concept : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Syakiroh , Tajudin (2007) Total Productive Maintenance Implementation In Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Zamri, Nur Ridha Rifaie (2017) Simulation Of Sprocket By Using Different Tool Paths Process In CAD/CAM Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Zhafarina, Aboo Bakar Merican (2009) Design And Product Development Of Multi-Purpose Rihal Through Concurrent Engineering Tools And Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norafiza, Jama (2011) Design And Develop PCB Half Populated Subsytem Of Management Inventory Systems At Motorola. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazam, Nur Fatin Diyanah (2019) Design And Development Of An Integrated Quality Inspection Gauge For NT40-0Z25-70 Milling Arbor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordiyanna, Norazemi (2013) Modeling of Stress Developed During Intermetallic Compound Growth at Cu Wire–Al Bond Pad Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhafiza, Mohamed (2008) Development Of An Electronic Schedulling Template For Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhazwani, Baharudin (2015) Appointment Scheduling In Health Care Industry By Using Modeling And Simulation : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norlizah, Mat Isa (2005) Temperature Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norshadatul Akmar , Mat Shadid (2015) Development of green noise barrier using coconut fiber. Project Report. UTeM. (Submitted)

Norsyahida, Sofian (2011) Design And Development Of Robot Arm For Stamping Machine Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norsyahila , Ahmad Sahhidan (2009) Application Of General Flow Pattern In Facility Layout. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur 'Ain, Azmi (2012) Design And Fabricationn Madular Product With The Incorprotion Of Diy Assembly Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Adila , Kamarudin (2015) Handphone triggered switches. Project Report. UTeM. (Submitted)

Nur Afiqah, Abdul Latif (2013) Application Of 7QC Tools To Improve Yield Performance Of Label Stock Product At ABC Company Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aisamuddin , Mohamad (2008) Motorized Worktable For Robotic Application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Aizatul ' Ain, Md Zahir (2015) Design And Analysis Of Local Fruit’s Pole Picker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Amalina, Mustafa (2015) Development Of New Shower Head Based On Water Flow Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Amanina, Mahamad Aziz (2015) Factors That Cause The Degradation Of The ERP System In Manufacturing Company In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asilah, Mastuki (2013) A Customer Affective Quality Analysis Using Analytical Hierarchy Process (AHP) In The Product Development Case Study (Product - Pen). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Atiqah, Md. Sadan (2011) Lean Management Study In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Azizulhakim , Zakaria (2007) Development Of Welding Aid Kit For Shielded Metal Arc Flat Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur El Shahira, Shari (2015) A Study On Productivity Improvement In Production Line By Implementation Of Lean Principles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farah Izyan, Abd Rahman (2015) Moving Part Combination Using Effort Flow Analysis (EFA) Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fatihah , Madi (2015) The effect of different thickness material stacking for four layer spot welding. Project Report. UTeM. (Submitted)

Nur Halimah, Jamalulil (2015) A Framework To Identify Operational Factors In Overall Equipment Effectiveness (OEE) Towards Lean Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hanisah , Buang (2007) Investigation of Handphone Manufacturing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hazirah, Mohamad Nasir (2012) Application Of Value Stream Mapping In The Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hidayah , Amir (2009) Life Cycle and Sustainability Of Design On RTV Silicone Rubber Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izzati , Marzuki (2006) Optimizing Number Of Servers For Haemo-Dialysis Fluid (HDF) Production Line At Ain Medicare Sdn Bhd To Increase Efficiency. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nur Nabila, Mahazid (2013) Effect Of Different Atmosphere For Different Sintering Temperature On Physical And Mechanical Properties Of Sub Micron WC-Co Powder Through The Powder Metallurgy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Nadia Atiqah , Mohamad Dzuhaimin (2015) The adoption of simultaneous engineering (SE) in design-manufacturing interface in automotive new product introduction (NPI). Project Report. UTeM. (Submitted)

Nur Nadia Ramadhani, Md yusuf (2012) Production Operating System A Case Study Of Make To Stock And Make To Order System. Project Report. UTeM, Melaka Malaysia. (Submitted)

Nur Qurratul Ain, Adanan (2015) Evaluation Of Value Stream Mapping Using Simulation In Textile Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Shahirah , Mad Hashim (2009) Rapid Tooling Strategies For Product Customization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syuhada, Hasimuddin (2013) Ergonomic Development Of Shoe Sole Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur'Adinlah, Norman (2015) Reducing Cycle Time To Improve Productivity In Lay-Up Process At Aerospace Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuralesya, Ramlee (2010) Productivity Improvement In Textile Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuranisha, Mat Ghani (2007) A Comparison Of Hand Phone Primary Packaging By Using Pugh Method (Case Study). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurasyikin, Araf (2014) Tensile behaviour under thermal degradation of thermoplastic elastomer PP/ENR filled reclaimed rubber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nurazhani , Abas (2008) Evaluatiom Of Product Assembability Using Lucas Hull Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfarhana, Mahmad Toher (2015) A Study On Workforce Innovation Skills Towards Performance Improvement : A Case Study At Sony EMCS (Malaysia) Sdn. Bhd. In Prai, Penang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhazimah, Mohd Hamka (2015) Implementation Of Value Stream Mapping (VSM) In Textile Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhidayah , Azmi (2010) RFID Based Door Access System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurjanah, Bahari (2011) Development Quality Function Deployment (QFD) For Employees Satisfaction Through Kano Method And Herzberg Theory Case Study in (Jabatan Perkhidmatan Awam). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurliyana, Zulhanee (2015) Proposing Future Value Stream Mapping For Safety Pin Manufacture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nursheda , Zainudin (2006) Graphical CIM Process Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nursyahmi, Abdul Sukor (2013) Real-Time Monitoring System For Nursing Home. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Adlina, Mohammad Jamil (2013) The Determination Of Inconsistency Quality Cutting Of Composites Part At Abrasive Waterjet Trim Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ain , Ismail (2009) Redesign Of A Product Using Boothroyd DFA Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Aini, Ahmad (2013) Overall Equipment Effectiveness Optimization (OEE) In Semiconductor Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Aini , Hamzah (2006) A Study On The Sustainable Product Development (SPD) Practices Among The Malaysian Companies. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nurul Arbaeyah, Ahmad Yassin (2010) Application Of Relationship Chart Method In Facility Layout. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Asyikin, Adenan (2008) Oil Particle Analysis Using Fourier Transform Infrared Spectroscopy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Farha, Abdul Rahman (2009) Application Of Design Of Experiment For Bell Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hafiza , Ab Ghani (2010) Productivity Improvement In Metal Industry : Work Study Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hafizah , Md Radzi (2008) Manpower Planning Utilizing Work Study At Data Storage Manufacturing Company. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurul Hatiqah , Harun (2015) Feasible study on dental restoration using time compression technologies. Project Report. UTeM. (Submitted)

Nurul Khaleeda, Ozman (2015) Analysis Of Material Handling For Automotive Assembly Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Nurain, Dzulkifli (2010) Develop And Propose An Optimum Maintenance Schedule For A Critical Machine At Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Wahida, Hanapiah (2010) Comparison Study Of Press Part Quality Inspection System: Checking Fixture And Faro Arm Laser Scanner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhuda, Ahmad (2010) Development Of Automated Maynard Operation Sequence Technique (MOST) Work Study Technique : Case Study At Aerospace Manufacturing Company Using Lean Six Sigma. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhuda , Arifin (2009) Study The Effect Of High Temperature Cycle Exposure To Evaluation On Embrittlement Of Welded Pressure Vessel Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurulhuda , Muhamad Nasir (2006) Mechanical Design Of An Automated Guided Vehicle (AGV). Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nusaibah, Mansor and Siti Norbaya, Yahaya and Nurul Zarirah, Nizam and Othman, Aman (2012) Consumers Acceptance Towards Green Technology in Automotive Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nyew, Mui Kin (2018) Challenges of implementing lean six sigma (LSS) towards performance improvement in manufacturing industries : A case study in Malacca area. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

nurul Syuhada, Che Hussin (2012) Implimentation Of Poka Yoke Through DFMEA Stage For Sme Industry In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Octivia, James (2010) Upgrading FMS 200 : Station 5 Using Human Machine Interface (HMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Khairul Akma (2015) Study on physical form of consumer products in product designing towards brand recognition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ong, Chien Chung (2016) Structural characterisation and properties of lead-free solders on different surface roughness of copper substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ong, Kah Kah (2016) Productivity Measurement And Improvement In Product Design Process Using Lean Tools Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Wei Lin (2019) Using Time Study To Improve Productivity Of Furniture Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ooi , Sen Jye (2007) Application Of Modern Product Development Tools In Product Design Development. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Othman, Muhammad Hasif (2018) Development Of Integrated Monitoring And Control System For Mushroom Cultivation On Environment And Fertigation System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

P

P. Manickavelu, Gogulan (2019) The Investigation Of GMAW Process Variables On Lap Joint Of Aluminium Alloy 5083. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Pahorudin, Nor Aisyah (2019) Investigation Of Machining Cost Modelling Based On Product Drawing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pheng, Syie Chie (2019) Investigation Of Motion Analysis For Productivity Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Punavasvaran, A. Perumal (2012) People Development System Database In Implementing Lean Process Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Q

Quah, Kai Theng (2016) The Effect Of Inventory Management On Competitive Advantage : A Study On Manufacturing SME In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

R. Ahmad , Muhaimin (2008) Critical QA And QC Process Procedures In Pressure Vessel Fabrication. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Rafeek Ahmad, Mohamed Aiman (2015) Reverse Engineering On 3D Scanned Data For CAD/CAM Programming Using Delcam And Catia V5 Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raharja, Alvin Hadiyan (2017) Development of standard time in repacking operation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rahim, Muhammad Haafiz (2022) Processability of calcined tin dioxide nanoparticles DPNR (Deproteinized Natural Rubber) through melt compounding method using two roll mill. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rahiman, Nur'Ain (2017) Design And Development Of Pineapple Leaf Fibre Extraction Machine. Project Report. UTeM, Melaka. (Submitted)

Raja Mohd Firdaus , Raja Ghazali (2008) Autonomous Maintenance Programme For Lathe Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rajah, Sasitharan (2019) Design And Construction Of Organic Food Waste-Fertilizer Conversion System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rajandren, Anusha Raj (2023) Development of a simulation aided reconfigure tool for hybrid assembly system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rajendran, Thavinnesh Kumar (2022) Quality and performance investigation of 3D printed ABS and PETG parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Raman, Pethal (2018) Lean Waste Analysis Using Value Stream Mapping For Productivity Improvement For C/MBR Comp Mid Floor At PHN Industry Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramdzan, Amira Husna (2017) Effectiveness Of Green Innovation Towards Business Performance In Selected Manufacturing Industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramlee, Naim A'imullah (2019) Establishment Of Value Stream Mapping (VSM) Of Balloon Production. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramli, Mohammad Adib (2021) Thermal behaviour of 3D printed part under the influence of nitrogen. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramli, Muhammad Syazwan (2018) Motor Control And Temperature Monitoring System For Dryer Machine In Agriculture. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rasiman, Nadia Ilysa (2017) Improving The Accuracy Of Open Source 3D Scanning Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ravindran Nair, Ajay Nair (2012) The Investigation Of The Influence Of Filler Welding Materials On The Microstructure And Hardness Of GTA Welding In Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ravintheran, Suhanthan (2019) A Study On Kansei Engineering On Product Development Using AHP Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Roslina (2016) Redesign of weaving department layout using Systematic Layout Planning (SLP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Razali, Siti Fasihah (2023) Application of Kansei vocabulary on development of the parametric product form design for customer oriented requirements. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Rina Syahira , Mohd Sharif (2009) Quality Improvement By Using Six Sigma In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohaida , Yusuff (2009) Production Efficiency Improvement For Production Line Of Mass Production : A Case Study Using Poka Yoke Concepts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohaidah, Mahidin (2011) Automatic Detection Using Human Machine Interface (HMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohana , Abdullah and Nor Akramin , Mohamad and Mohd Soufhwee , Abdul Rahman (2011) A Study On Bottleneck Operations To Optimize Manpower Planning For Productivity Improvement At A SME Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohanai, Reyanhealme (2014) Design and analysis of facilities layout for increase production in food industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rohani, Osman (2008) The Study Of Natural Rubber - Polyethylene Polymer Mixing Mathod. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roky, Muhamad Akashah (2021) The effect of thermal responsive material polymeric filament to strength and transformation in 4D application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roslan, Fauzei (2017) Topological Optimization In 3D Printing Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Muhammad Fikri (2023) Investigation the effect of printing parameter on physical properties of 3D printed PLASPF composite. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Rosli, Noor Nabila Natasya (2017) Study the influnce of acetone to improve surface finish of 3D printed part for ABS and PLA material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Nornarieyza (2017) Layer Adhesion Investigation Of 3D Printer Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Nur Iffah Syamimi (2022) Quality improvement in rice production industry using DMAIC approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Syasya Syahindah (2022) Lean implementation of value stream mapping for the reduction of production time and quality defect in electronic industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Mohamad Muzammir (2015) Proposing a single minute exchange of dies in textile manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roslina, Mohd Nor (2013) Improvement Of Quality Process Control Of Airbus A320 Spoiler Programmed In Composite Technology Research Malaysia Sdn Bhd (CTRM): Process Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosman, Muhammad Rafiq (2019) Multi Objectives Performance Optimisation Of NR/EPDM For Compression Molding Process: Parameters Investigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosman, Zamri (2010) Development And Evaluation Of Interactive SPC Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosnah , Sahak (2009) Quality Improvement Of Automatic Cutting And Sewing Machine In Polyprolene Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosnani , Che Mamat (2008) The Quality Approach In Kenseisha (M) Sdn. Bhd Company For Electronic Process Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roy Hanson, Jimit (2015) Analysis Of Preventive Maintenance Planning For Hydrogen Manufacturing Unit (HMU) In Shell MDS (M) Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozali, Mustafa (2006) A Case Study Of Using Six-Sigma (DMAIC) Methodology In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozi, Muhammad Nasrullah (2019) Design Of Scrubber System For Treatment Of Welding Gases. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roziana , Abu Nasir (2011) 5S Implementation And People Involvement At Muehlbaeur Technologies Sdn.Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roziman , Ismail (2007) Implementation Problems In Lean Manufacturing : A Study On Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozman, Rozaidi (2016) Design And Development Of Food Waste Compactor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozuli, Nurul Atikah (2016) Design and analysis of optimum clearance of an open small thimble bending die. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rusli, Nurin Syafiya (2022) Study of polypropylene/natural rubber thermoplastic elastomer loaded with palm ash. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ruzi, Nuur Atiqah (2023) Design and development of UFO (used frying oil) bin prototype. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ruzzana Aida , Mohd Ramin (2006) A Study The Effectiveness Of Fitness Testing In Pressure Vessel Fabrication Industry. Project Report. Melaka, Malaysia, UTeM. (Submitted)

S

S.Chinniah, Eswaran (2017) Comparative Study Between 3D Scanner,Vernier Calliper,And Coordinate Measurement Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

SKH Muhammad , SKH Abd Rahim (2009) A Study On Practice Of Design For Sustainability And Design For Environment Practices In Automotive Industries In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saad, Mohd Shukur (2018) Product Design And Development Of Automated Handheld Fish Scales Skin Remover. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saadon, Damia Syahirah (2023) Conceptual design of self-organised USB Charger cable by using TRIZ method. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Sabrina , Dangatil (2008) Design And Model Making Of Bending Die. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sah Azmi, Amirah Atiqah (2021) Application of analytic hierarchy process to determine and optimize FDM printing process parameters. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Said, Izuddin (2018) Product Quality Improvement For SME Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Saifuddin , Mohd Isa (2015) A study on TQM's tools and techniques for quality improvement : the case of Malaysian manufacturing industry. Project Report. UTeM. (Submitted)

Saiful Bahrin, Sharyna Development Of IoT Based On Monitoring And Control System For Lifecycle Management. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sairizal , Misri (2007) Design Improvement On A Method Of Inflating The Inflatable Articles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salahuddin, Muhamad Zhafrie (2020) A Comparative Study Of Mechanical And Thermal Conductivity Properties Of An Insulation Particleboard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salasiah, Zakaria (2012) Chemical Safety And Risk Assessment In A Manufacturing Environment. Project Report. UTeM, Melaka Malaysia. (Submitted)

Saleh, Nor Azureen (2023) Design and development of motorcycle rotated stand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saleh, Nurul Sazwani (2016) Study Of Puyuh Farm Environment Control System Using PLC Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saleha Bee, M.Mohd Siraj (2008) Workstudy At Lay Up Process In Preparation For An Aerospace Company Value Stream Mapping And Kaizen Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saliman, Munir Muhamad Muda (2018) Effect Of Addition Of 5% Copper In AL A356 During Cooling Slope Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salimi, Muhammad Syazwan (2022) Development of machine vision system by using tensorflow for object detection in manufacturing. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Salini, Kasee (2011) Value Stream Mapping Using Simulation In Semiconductor Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salmie Suhana, Saad (2010) Design And Analysis Of Turbocharger By Casting Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sam, Mei Lee (2015) Preventive Maintenance Application Of Machineries At Apparel Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samat, Anis Hazirah (2019) Investigation On Mechanical And Thermal Properties Of 100% Recycled 3D Printed ABS Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsudin, Anuar (2009) Robot Gripper Using Microprocessor 68000. Project Report. UTeM, Melaka, Malaysia. (Submitted)

San, Chee Hou (2016) The Implementation Of 5S In Manufacturing Industries : A Case Study Of Foreign Workers In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sani, Mohamad Safei (2017) Wear Behaviour Of 3D Printed Part Of Carbon Fibre Reinforced ABS Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sapardin, Siti Azureen (2016) Product Improvement Of Cornell CFF-12P Fan By Design For Assembly Method (Boothroyd Dewhurst). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saparuddin, Hasan (2017) Effect Of Spot Weld Tip To The Welding Characteristic Of Dissimilar Resistance Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saravanan , Paramasivan (2008) An Assessment Of Quality Control System In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarjuni, Noor Afiqah Nabila (2016) Semisolid processing of aluminium LM6 alloy using cooling slope casting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sarvin , Silvarajo (2008) Quality Improvement Using 5S Concept In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarvyeen Babu , Ramakrishnan (2009) Packaging CD And Mini CD Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Sasee, Murallitaren (2018) Design And Fabricate Portable Electric Grass Cutter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sathasivam, Vimalan (2018) Development Of Wireless Monitoring Device For Patients Undergoing Limb Joints Physio Rehabilitation Via IoT System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Seladorai, Turkeswaran (2020) Design, Simulation And Analysis Of Climbing Trolley. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Seman, Mohd Ikhwanul Hayat (2015) Effect of resin ratio and baking temperature to the properties of biodegradable resin bonded sand casting mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Seri Izzatie , Abd. Azizs (2009) Evaluation On Embrittlement Phenomena For Welded Pressure Vessel Steel Exposed To Hydrogen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaharuddin, Syafiqah (2017) The Effect Of Lean Production Toward Company Performance Is Noodle SME's Company In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shahdan Ajib , Omar (2011) The Effect Of Process Parameters On Spot Welds Strength Of 6061 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrir, Sahari (2010) Mechanical Properties Determination Of Mild Steel And Stainless Steel Joint Fabricated By MIG Welding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrom, Mohamad Nur Haqkim (2017) The Effectiveness Of ISO 31000 Implementation In Manufacturing Industries In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shalizah , Aman Shah (2009) Design Rules Analysis For Sheet Metalworking Using Cad Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsharhadi, Muhammad Izzuddin (2018) Bobbin friction stir welding of AA1100. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamsuddin, Mohamad Fakhri (2016) Development Of Baby Stroller Automation System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsuddin, Muhammad Hafizudin (2019) Online System Development for Critical Parameter Observation in Electronic Fabrication Laboratory (Thesis). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamsuddin, Muhammad Nasiruddin (2016) Physical And Mechanical Properties Of Natural Rubber Reinforced Carbon Black For Effect Of Tapioca Starch Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsudin, Ahmad Al-Nabil (2021) Effect Of Slicing Parameters On Void Formation In Fused Deposition Modelling (FDM) Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsurijan, Salehah (2018) Improvement in thermal printer line production by using Kaizen method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sharaynee, Krishnan (2008) Development Of An Expert System For Welding Process Verification Using MS Visual Basic. Project Report. UTeM, Melaka. (Submitted)

Sharifah Zulaikha, Syed Muhammad Nurdin (2015) Modeling Part Supply System For Automotive Assembly Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shariful Redzuan Naquiddin, Abd Lah (2015) Development Of A Simulation Based Kanban System for Lean Practitioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sheikh Fahmi , Mohamed Bamadhaj (2007) A Study On Quality Tools And Techniques Based On Swot Analysis At CTRM AC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shivarajh, Egambaram (2008) Sustainable Development of Coffeemaker Using Design for Environment (DFE) Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shukri , Zakaria (2009) Semi-Automated Lemon Grass Cutter. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Sia, Jia Ling (2013) Industrial Temperature Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sim, Chee Seng (2008) An Analysis Of Product Quality By Using Quality Control Method In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sim, Yiew Yiew (2019) Investigation Of Mechanical Properties Of Recycled ABS Printed With Open Source FDM Printer Integrated With Ultrasound Vibration. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Siti Balqis Nurilyani , Ibrahim (2007) Study of product architecture for design for maintenance. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Siti Farah Nadiah , Taib (2007) Design Of An Improved Production Layout For A Shoe Making Factory: A Case Study Of A Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Farha , Abdul Manan (2007) Developing The Material In Industry Using 3D Modelling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Farhani , Mohd Amin (2015) Temperature monitoring system for infant incubator using Arduino. Project Report. UTeM. (Submitted)

Siti Najatul Aishah, Majid (2015) Design And Fabricate The Model Of An Innovative Plucking Device For Salak Fruit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Noridayu, Samad (2013) A Study Of Value Stream Mapping (VSM) In HPF Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nur Madihah , Apandi (2012) Design And Analysis Of Casting Valve For High Voltage ABC Dead End Clamp By Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nurbaya, Tamin (2009) Improvement Of The Reactor Feed Pump Performance By Implying Six Sigma Method Using The Dmaic Phases. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Rahmah, Mohd Alias (2008) Design Improvement Of A Household Appliance Using DFMA. Project Report. UTeM, Melaka Malaysia. (Submitted)

Siti Rossmah , Omar (2009) A Quality Study Of Parts Produced By Silicone Rubber Mould Using Vacuum Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Sahara , Abdullah Shani (2007) Development Of Robot Selection Strategy For An Application Using Ms Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Shahara, Dolah (2015) Optimization For Maintenance Staffing Needed Using Spreadsheet Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Shamila, Yakabasah (2015) Design Analysis Of Retractable Hose Mechanism Using DFMA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Zulaiha, Yusoff (2008) Design A Up Side Down Robot Gripper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivanyanam , Subramaniam (2013) Modeling, Prediction And Optimization Of Dilution On Austenitic Stainless Steel (AISI 316L) Surfacing Of Low Carbon Steel (AISI 1020) Using Robotic Arc Welding. Project Report. UTeM, Melaka. (Submitted)

Sivapragasam, Thiliban (2016) Design of automatic loading and unloading of workpiece system for HAAS CNC milling machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Soleha , Rossdy (2007) A Study On Manufacturing Information Requirements For Electronics Assembly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Solihin, Muhammad Zulfadhli (2015) Production Defect Reduction By Using Six Sigma (DMAIC) In Rubber Gloves Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Somasundram, Subramaniam (2023) A study on end-of-life vehicle for used part dealers: Proton Wira case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sothi, Laavanya (2019) A User Acceptance Of Chemical Management System (CMS) Using Kansei Engineering. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Stephanie Mujan , Hamilton (2013) Thermal insulation particle board made from sugarcane bagasse and kenaf fibers reinforced with polythlene. Project Report. UTeM, Melaka. (Submitted)

Su, Zhi Qian (2016) Determination of tensile properties of topologically optimized FDM for end-used part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Subramaniam, Siva Kumar and Siti Huzaimah, Husin and Yusmarnita, Yusop and Abdul Hamid, Hamidon (2009) Real Time Production Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Subramaniam , Siva Kumar (2006) Production Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhaily , Mohamad Yusof (2009) Investigation On The Fracture Toughness Of Welded Pressure Vessel Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Suhaimi, Muhammad Haziq (2023) The design and development of pineapple planting mechanism. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Suhana , Mohd Gazi (2007) Design And Development Casting Mould Pattern (Keris). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulaiman, Muhammad Afiq (2020) Tin Electrodeposition On Cu Substrate For Flexible Connector Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulaiman, Muhammad Syazwan (2021) The effect of different drying methods on the quality characteristics of Kappaphycus AlvarezI Sp. sea weed powder compressed. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sulaiman, Sabikan (2010) Design And Develop Wireless Based Control Of Industrial Robotics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulaiman, Siti Nurul Ain (2023) Optimize product delivery process by using value stream mapping in manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suriati, Akmal and Ruzy Haryati , Hambali (2009) Moulding Process For The Malaysia Traditional Cookies (Cakar Ayam). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suzilawati , Abdullah (2009) Application Of SWOT Analysis As A Management Tool For Analyzing Competitiveness Of A Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syafiq, Ramli (2013) Manufacturing Process Selection For Circular Blade Using Analytical Hierarchy Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syaqayum Zaiman, Abd Rahman (2010) Application Of Value Stream Mapping (VSM) In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Idris, Syed Muhammad Al-Amin (2017) Fabrication Of Complete Denture Via 3D Printing Technology With Reverse Engineering Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Syed Mohd Fadly , Syed Hassan (2007) Reverse Engineering Of Dogbone Mould Into Another Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Mohd Fadzil, Sharifah Nurul Jannah (2017) Development Of Electronic Component Rack System By Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Syamsudin, Abdul Hakim (2017) Balancing Equipment For High RPM Pulley. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Taharim, Nor Najwa (2017) Quality improvement in manufacturing industry by using DMAIC approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tajry, Mohammad Hafifi (2019) Study On Pile Machine To Improve The Construction Process Of Fakulti Kejuruteraan Pembuatan, UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tajul Ariffin, Abdullah and Taufik, , and Sivarao, Subramonian (2011) Design And Analysis Of Car Heat Remover Based On Design For Sustainability Using Rapid Prototyping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tajul Arus, Muhammad Syazwan (2016) Examining The Relationship Between The Maintenance Machine Downtime And Firms's Production Yield: The Case Of Manufacturing Companies In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Talib, Nurazliana (2015) Quality improvement through lean practice. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tam, Yau Yin (2016) Modelling overall equipment effectiveness improvement with overall production cost. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Beng Hong (2013) Design, Optimization And Prototyping Of Multipurpose Weld Electrode Holder. Project Report. UTeM, Melaka. (Submitted)

Tan, Kah Ee (2011) Impact Of Forecast Modeling On Cost Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Kui Siong (2010) Implementation Of Production Schedule Board To Decide Standard Production Time In Manufacturing Industry (Case Study: Asia Roofing Industries Sdn Bhd). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Fei Sian (2018) Integration Of Time Driven Activity Based Costing (TDABC) And Simulation For Decision Making In Assembly Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Huay Kean (2015) Effect of repetitive rework on dissimilar austenitic stainless steel pipes by using GMAW orbital welding. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Ing Yuh (2019) Improving Rubber-To-Metal Bonding Through The Use Of Silane Coupling Agent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Lee Ping (2016) DMAIC approach to reduce total duration of prototyping process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Mei Yi (2015) Investigation of optimum parameters of FDM rapid tooling pattern for sand casting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Terence Kah Haw (2016) The Influencing Factors Of Technology Adoption That Could Enhance Manufacturing Processes In Paper Mill Company : A Case Study Of Yeoung Chaur Shing Paper Mill Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Wei Chen (2011) Upgrade FMS200 : Station 4 Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Xihan (2017) A study of future of manufacturing in the context of developed countries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Yon Shern (2018) The readiness of Malaysia manufacturing companies in implementing Industry 4.0. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan , Chin Nam (2011) Productivity Performance Improvement In A Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Choon Leong (2014) Implementing TPM approach in semiconductor company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tang, Mei Shick (2017) The influence of process parameters on mechanical properties of fused deposition modeling parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tang, Pei Chin (2020) Comparison Of Experimental And Theoretical Studies Of Nanocellulose Jute Fiber In The Polylactic Acid (PLA) Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tarmeze @ Ghazali, Ahmad Afiq (2016) Study Of Accuracy Of Molar Teeth Prototype Produced By Powder And Liquid Base Layer Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufik, and Mohd Rizal, Salleh and Sivarao, Subramonian and Tajul Ariffin, Abdullah (2012) Desing Of An Organic Battery For Residentail Purpose Using Design For Sustainability And Rapid Prototyping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Chu Ling (2010) Quality Improvement In The Manufacturing Industry An Application Case. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Chee Hong (2015) Design Flexibility Study For Product Development Using Direct Modeling CAD System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Shaw Ting (2017) A Study On Effect Of Process Parameters In Sheet Metal Forming Simulation Of AA5052. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teh, Woei Ti (2020) Developing Process FMEA For Centrifugal Pump A Case Study In Loji Air Bertam, SAMB. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tengku Ezura, Tengku Mansor (2015) Design And Testing Of Automation Control For Mini Gula Melaka Production System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Mohamad, Tengku Ahmad Dzilkarnain (2014) Investigation based on design of experiment for woven composite deformation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tengku Mohd Saalahuddin, Tengku Nordin (2008) Product Design Optimization Using Design For Manufacture And Assembly Approaches. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Phaik Yuan (2017) Optimisation Of Poka-Yoke Concept To Develop A Prism Jig Assembly For Semiconductor Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teoh, Yong Siang (2011) Implementation Of FMEA And Waste Elimination In Company Muehlbauer (Assembly Company). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tham, Wai Teng (2017) Design A Low Cost Bread Toaster Using DFMA Method. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Thang , Jun Boon (2010) Visual Interface To Controlling A Dot Matrix LED Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Thurairaj , Arumugam (2009) Development Of TPM Spreadsheet For Laboratory. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ting, Doris Hui Chii (2015) Assessment of storage and retrieval system at apparel industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ting, Hui Yin (2017) Investigation of the effect of raster angle and layer thickness on mechanical properties of fused deposition modeling (FDM) parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tioh, Boon Peng (2005) Sensory System For Industrial Robot Automation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tiong, Xiang Kai (2016) Design Of Wireless Industrial Robotic Arm And Control Using Android Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Toh, Hui San (2017) Sustainability key performance indicators (KPIs) for healthcare industry using analytic network process (ANP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tormudzi, Umi Nurnajeha (2017) A study on profile design using Kano-AHP approach for baju muslimah product. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tshai, Chen Tong (2008) An Analysis On Facility Layout Using Systematic Layout Planning - Case Study In Lighting Manufacturer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

U

Udin, Mary (2022) Recycle food waste into animal food (dog). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Umar, Mohd Fuad (2013) Effect of assembly line and normal working environment to cycle time. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

V

Vellasamy, Yuwendran (2019) The Effect Of Bobbin Friction Stir Welding Repetition Process On The Microstructure Of The Aluminium Alloy 1100. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vinod Kumar, Isweran (2015) Multiple Valve Spring Compressor (MVC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Voon, Pei Hee (2007) Versatile Dot Matrix Display With Time Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Waheeda Hanim, Ab. Rahman (2005) Quality Improvement In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wahyono, Sapto Widodo (2010) Design of New Punch Geometry to Reduce Force in Sheet Metal Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Ahmad Fitri, Johari (2012) A Study On The Failure Analysis Of The Tig Welding With Dissimilar Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Fadilah , Wan Jamaludin (2006) Intelligent Part Recognition And Auto Storage Using Feature-Based Modelling Withing CAD System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Wan Hasrulnizzam , Wan Mahmood (2006) A Study On Lean Manufacturing In Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Hasrulnizzam , Wan Mahmood and Zuhriah, Ebrahim (2007) Development Of An Office Total Productive Maintenance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Ismail, Wan Nor Afifah (2015) Applying 7QC Tools To Measure Product Quality Performance At Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Ismail, Wan Syarma Adila (2016) Implementation Of Quality Method To Improve Procedure In Handling Quality Issue At SME Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Salihin, Wan Mustafa (2008) Smart Bottle Packing System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wan Noor Azrina , Wan Azhari (2007) Observation Of Quality Inspection Standard For Shoe-Making Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nor Azman, Wan Ainul Syafika (2016) Study and analysis physiognomic toward the product design (Kansei engineering). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Noridayu , Wan Mansor (2011) Forecasting Highly Irregular Demands. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Roslan, Wan Nurul Effah (2015) Application of graph-based method for manufacturing layout evaluation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Yaacob, Wan Nur Hidayah (2016) An analysis and measurement for the customer design preferences. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wang, Kang Yu (2020) A Model Of Efficient Small Groceries Shop Using Lean Manufacturing Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Carrie Siaw Shien (2015) Planned yield, time yield and simple yield methods to calculate oee metric in semiconductor company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Foo Yong (2016) The Study Of Critical Factor That Affect The Efficiency Of Kanban System In Production Line: A Study Of Paper Mill Industrial. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, John Huang Ung (2015) Development of a database to support sustainable packaging design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Kuan Lih (2015) Using visual management tool to error proof WIP lots withdrawal in semiconductor manufacturer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong , Yun Shi (2012) Quick Response Manufacturing (QRM) In Job Shop Environment. Project Report. UTeM, Melaka Malaysia. (Submitted)

Wong , Nelson Wye Leong (2010) Improve Product Sustainability Through DFE Approach On Design Of Home Appliances : A Case Study On Electric Iron. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yahaya, Muhamad Amerul Mukmin (2017) Electrodepostion of nickel fly ash (Ni-FA) composite coating on aluminium alloy 7075 substrate from non-aqueous media : study effect of current density. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yap, , Wan Loong (2013) Design Development Of Load Carrier Type AGV. Project Report. UTeM, Melaka. (Submitted)

Yap, Yeok Ven (2017) Reveal hidden waste through Maynard Operation Sequence Technique (MOST) : a case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yee, Sze Ling (2017) Investigation on mechanical properties of additive manufactured bone scaffold. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yew, Sin Wei (2020) Design And Development Of Large-Scale Size 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yoong, Sai Sieng (2016) Process parameter relationship of stainless steel to carbon steel pipes welding. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yuearajan, Santhiran (2013) Modeling And Simulation Of Drawing Process On Aluminium AA7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yumasir, Mohamad Hadi (2017) Design analysis of metal forming process for the corrugated metal gasket. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yusoff, Yusra Fitri (2023) Study of 3D printing filament made from recycle polypropylene (PP) and ground tyre rubber (GTR) treated with NaOH. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yuza, Nor Aqilah (2019) The Effect Of Copper (Cu) Electroplating Parameters On Copper Vertical Interconnect Access (VIA) Filling For Printed Circuit Board (PCB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zahlizamrina, Ramli (2011) Inventory Storage With Barcode (ISwB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zahlizamrina , Ramli (2011) Inventory Storage With Barcode (ISWB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaimi , Sahak (2006) Design And Fabrication Of Pressure Limiting Valve For Automobile Tube-Tubeless. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Zainal, Muhammad Aiman (2022) The implementation of UAV mapping strategy for oil detection with GIS application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainal, Muhammad Hamizan (2023) Environmental assessment of design of biodegradable food packaging. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Zainal Kifli, Muhammad Syahmi (2017) Investigation On The Suitability Of Plastic Bottle Material As 3D Printer Filament. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainan, Muhammad Syazwan (2019) Design Of Pick And Place Mechanism For 3D PCB Assembly Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainol, Nor Zulaika (2018) Welding distortion analysis using FEM and experiment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainudin, Robiatul Aqirah (2017) Development Of Casing And Ventilation System In 3D Printer, Prusa 13 By Using Integrated Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainurin, Nurul Shahida Akila (2023) Product design and analysis of walker using IoT. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Zakaria, Amir Adam (2018) The impact of packaging on food waste: Study on retail industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Fazlinizam (2016) Design Of Ultimate Shield For Impact Resistant Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Mohd Ridzman Ikhza (2020) Design Of Wearable Sit-Stand Stool For Prolonged Standing Jobs. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Nurul Farmira (2016) Design A Low Cost Table Fan Using DFMA Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Nurul Nadiah (2015) The Evaluation Of Production Line Performance By Using ARENA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamree, Afif Fahmi (2019) 5’S Decision Support System For Lean Practitioners. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamuri, Amiza Aliyana (2017) Reducing rejection on nickel free plating at finishing line in metal manufacturing company by using Kaizen approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zaren Mukrish , Zainal Ariffin (2010) Production Losses Analysis Of An Automotive Component Using General Linear Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zenoraiman, Mustapha (2006) A Study of Surface Integrity Whilst Turning AISI 1045 Steel With TIC/WC Coated Insert. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zhafran Aizat , Zakaria (2007) Productivity Improvement By Using Line Balancing Technique Case Study At An Electronic Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zharif Anwar, Sulaiman (2011) Analyzing Transformer Manufacturing Failure By Using FMEA Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zolkefle, Muhammad Zakki (2019) Improvement On Light Reflective Jacket To Increase Visibility Of Motorcyclist. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkafle, Muhammad Zulfikri (2019) Experimental Study On Mechanical Behaviour Of Fused Deposition Modelling (FDM) Printed Parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkafli, Norizzati (2017) Measurement Of Residual Stress In Cold Work Austenitic Stainless Steel 316L With Deflection Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkefli, Hartini (2015) The profile design (image) towards customer emotional responses. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkiffli Fahmi , Ambia (2013) A Study Of AGV Drive Mechanism. Project Report. UTeM, Melaka. (Submitted)

Zulkiflee, Mad Atari (2005) Development Of Postprocessor For Milling Machine HAAS Vop-C. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Mohd Rodzi (2016) Study Of Thermal Effect On Ester Oil Dielectric Stress Using Breakdown Measurements And Total Acid Number (TAN) Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Muhammad Fuad Hafidz (2018) Development Of A New Spread Sheet System For Inventory Management. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Nor Fairuz Safra (2019) Fatigue Performance Of Additive Manufactured Polymer With Different Composition Of Raw And Recycle Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zuriah , Zakaria (2007) Pencengkam Robot Berbentuk Silinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)