Stamping Oil Condition Monitoring At Miyazu Using FT-iR

Na'ain , Shari (2009) Stamping Oil Condition Monitoring At Miyazu Using FT-iR. Project Report. UTeM, Melaka,Malaysia. (Submitted)

	PDF (24 Pages) Stamping_Oil_Condition_Monitoring_At_Miyazu_Using_FT-iR_Na'ain_Bin_Shari_TS253.N32_2009_-_24_Pages.pdf - Submitted Version Download (851kB)
	PDF (Full Text) Stamping_Oil_Condition_Monitoring_At_Miyazu_Using_FT-iR_Na'ain_Bin_Shari_TS253.N32_2009.pdf - Submitted Version Restricted to Registered users only Download (2MB)

Abstract

A project titled “Stamping Oil Conditioning Monitoring at Miyazu using FT-iR” has been carried out at Miyazu (M) Sdn. Bhd in Shah Alam, Selangor. The objectives of this project are mainly to study the percentage of moisture existed in the oil and study the factor that caused the oil become insufficient to remove burr from stamping machine. There are some significant problems faced in this study which is possibility of the oil used in the stamping operation at Miyazu (M) Sdn. Bhd. contain any particles that can cause dent problem on the material produced and also possibilities of moisture existence in the stamping oil that can cause the oil insensitive and unfunctional when doing the stamping process. The study will be done in Chemistry Laboratory at Faculty Of mechanical Engineering, Technical University of Malaysia Melaka by using FT-iR (Fourier Transfer Infrared Spectroscopy), which will detect the moisture in oil. In addition, the sample of oil will be taken at the production Line G and H at Miyazu (M) Sdn. Bhd. The chosen line G and H because of the several factors, which is to be more specific and more accurate when getting the data and result for the research. The factor contributes to the problem also easy to detect when research is done in a specific line. The problem that happens in the stamping process can be identifying by using the lubricating oil in the specific production line. At the end of this research, i found that there is a present of water, soot, and oxidation in the oil that is why the oil is become weak and less functional to remove burr at the stamping machine.

Actions (login required)

View Item