Design And Analysis Of Step Clamp Using Sand Casting And Rapid Prototyping

Mohd Shahzudin, Saleh (2012) Design And Analysis Of Step Clamp Using Sand Casting And Rapid Prototyping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 pages) Design_And_Analysis_Of_Step_Clamp_Using_Sand_Casting_And_Rapid_Prototyping_24_pages.pdf - Submitted Version Download (429kB)
	PDF (Full Text) Design_And_Analysis_Of_Step_Clamp_Using_Sand_Casting_And_Rapid_Prototyping_Full_Text.pdf - Submitted Version Restricted to Registered users only Download (2MB)

Abstract

The title of this project is Design and Analysis of Step Clamp Using Sand Casting and Rapid Prototyping. The project was staretd by identified the problem statement, and the objective which is to investigate the design parameter of sand casting for step clamp, to design a casting mold base on the optimum parameter using CAD tools such as Solidwork and to analyzed the sand casting mold using CAD software such as ANSYS. The chosen manufacturing tool, Step Clamp was design by using Solidwork and converted into STL file to tranform the design into casting pattern by using Rapid-prototyping process. Then, nine design concept of the casting mold were designed and were analyzed by using ANSYS according to the analysis parameter set. Based on the analysis, the comparison had been made and the best design concept has been selected which is siutable to use in the sand casting process ABSTRACT

Actions (login required)

View Item