PC Based Motor Control With SMS Aplicatoin

Chan, Wai Teng (2010) PC Based Motor Control With SMS Aplicatoin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Pc_Based_Motor_Contrpl_with_Sms_Aplicatoin_-_24_Pages.pdf - Submitted Version Download (1MB)
	PDF (Full Taxt) Pc_Based_Motor_Contrpl_with_Sms_Aplicatoin_-_Full_Taxt.pdf - Submitted Version Restricted to Registered users only Download (6MB)

Abstract

PC-based motor control with SMS (Short Message Service) application is a system created to control the speed and direction of DC and AC motor by sending a specific SMS from mobile phone. The objective of this project is to bring conveniences to the motor user that can control the motor anywhere by using this SMS application. To achieve the objective, LabVIEW is used to design a virtual instrument for front panel. By using the design panel, the message send by the user can be display on the screen of PC for monitoring purpose. Upon to it, the speed and direction of AC motor and DC motor can be control by the design front panel with SMS notification. To implement this, GSM modem is used to connect LabVIEW front panel to receive the SMS from mobile phone. The utilization of GSM modem in this project as it ubiquity standard which enable subscribers to use their phones in many parts of the world, and make international roaming very common between mobile phone operators. This system is extremely handy and convenience to operate at any place by controlling the speed and direction of motor. AT command is used to control the function of the modem. Apart from that, data acquisition module (USB-6221) is used for real time monitoring and interfacing between hardware and software. Then, the physical value was converts to the readable data by front panel

Actions (login required)

View Item