Speed Control Of CESB Conveyer Belt With PLC

Mohd Faiz , Hassan (2007) Speed Control Of CESB Conveyer Belt With PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Speed_Control_Of_Cesb_Converter_Belt_With_PLC_Mohd_Faiz_Bin_Hassan_-_24_Pages.pdf - Submitted Version Download (1MB)
	PDF (Full Text) Speed_Control_Of_Cesb_Converter_Belt_With_PLC_Mohd_Faiz_Bin_Hassan.pdf - Submitted Version Restricted to Registered users only Download (6MB)

Abstract

This project is about to make a Direct Current motor controler for conveyer use in Cubic Electronic Sendirian Berhad (CESB). The project objective is to overcome the problem that occured in the production line. The problem is the difficulties to set the cycle time for each conveyer according to work order. Current speed controller that had been used in CESB use potentiometer as the methods to varied the speed of trhe motor. This method are hard to control and not so practical. My project is to install a several fix resistor to get the frequent used speed in manufacturing process in CESB. This resistors will be simulated, tested and finally install to the motor controller. PLC unit are the controller that used to start the motor and then cooperate with internal stopwatch to record cycle time done for the motor. Finally buzzer will activated for 5 seconds to alert user that the cycle time that had been taken for the motor is recorded.

Actions (login required)

View Item