Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Chong, Ze Ming Bryan (2015) Design And Construction Of A small Scale Underwater Vehicle With Obstacle Avoidance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rauf , Abdul Kadir (2006) The Development Of Solar Energy Collector For Stirling Engine To Obtain An Optimum Produced Power. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aw, Aaron Teik Hong (2008) Design & Development Micromouse For Robot Competition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bernardette , Louisa Francis Ting (2008) Design And Development Of Accumulator For Domestic Water System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jurik Riguh, Ahras (2009) Design And Development Of Automated Sorting Recycle Bin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Chee Yoong (2010) Optimization Of Machining Parameters In Turning Process Of Aluminum Alloy 6063. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azizul , Hamdan (2006) Alat Bantuan Pembelajaran Mikropengawal MCS51. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shah , Abd Rahman (2007) Robotic Arm Spy Tanker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Sofiuddin, Khidir (2007) CS8 Humanoid Robot (LEG 1). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adam, Sepee (2008) Robot Automatik Menggunakan Motor Penginjak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirul, Isnan (2015) Addition Of Zinc Diamyldithiocarbamate Into Palm Oil As Physical Property Improver For Lubricant Substitution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farizzul Hakim, Mohd Saroji (2015) Addition Of ZDDP In Canola Oil As Physical Property Improver Vs SAE 40 Mineral Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nizar , Manshor (2009) Design Analysis Of A Press Machine For Disposable Pet Bottle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Na Eisyah Sarah, Mustafa (2015) ARM Rehabilitation Device Controller Based On Fuzzy Logic Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Emafazreen, Mohd Yatim (2008) Design A Bipedal Walker Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rajandran , Morthui (2007) Intelligent Car Parking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Soo, Kok Yao (2015) Development Of Hybrid Wheel-Legged Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong , Francis Ch'ng Kang (2007) Automatic Fish Feeder For Cultivation Pond. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

A'zizi, Abdul Rahman (2016) Preparation And Characterization Of Paraffin-Poly (Ethylene Glycol) Composites As Form-Stable Phase Change Materials For Thermal Energy Storage Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A. Hamid, Mas Eliya (2016) Pet Feeder System Using Android Apps. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A. Jalil, Hanisah Nadiah (2015) Design And Simulation Of In-Pipe Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A. Kadir, Syahdan Amirul (2016) Friction And Wear Preventive Characteristic Of Biolubricant Derived From Waste Cooking Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Ghani, Ahmad Fuad and Mohd Daud, Mohd Ahadlin and Md Zahir, Nur Aizatul 'Ain (2018) Optimization Of Carbon Fiber Reinforced Polymer And Glass Fiber Reinforced Polymer Using Analytical Hierarchy Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab Latif, Norhazlia (2017) Conceptual Design And Fabrication A Novel Energy Harvester For Malacca River. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Malik , Ibrahim (2007) Persamaan Kinematik Dan Dinamik Untuk Robot Rhino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahim, Siddiiq (2017) Investigation on turbine blade's performance by using 3-Dimensional CFD. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Ab Rahman, Saeman (2009) Development Of Automated Satay Assembly Mechanism Using Gear Design Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rashid, Mohd Zamzuri and Mohd Shah, Hairol Nizam and Sulaiman, Marizan and Ismail, Zool Hilmi (2017) A New Controller Approach Using Mixed Linear Quadratic Gaussian (LQG) / H-Infinity To Improve Trajectory Tracking Of Nonholonomic Non Wheel System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razak, Nur Hasinah (2016) Numerical investigation on different penetration angle in bone drilling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab. Hadi, Ahmad Syukran (2019) Automated paper cutter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab. Kadir, Norkhuzaimah (2014) Analysis on the robotics chip mounter performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab. Rahim, Muhammad Ashraf (2019) Tribological studies on ultra high molecular weight polyethylene with palm kernel shell in dry condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Azis, Muhammad Taufiq (2019) A project on ball and concave attachment for lathe. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Hadi , Abd Malik (2007) Control Of An Inverted Pendulum Comparison Between PID Controller And SFC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Manaf, Amirul Hamim (2022) Evaluation of the electrical energy efficiency of the new faculty of manufacturing engineering, UTeM building through light intensity analysis. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abd Rafar, Mohd Din Arshad (2008) Design Validation And Development Of A 6 Axis Robot Components. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Abdul Fattah (2016) Development Of Linear Positioning Table For Drilling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Abdul Fattah and Mohd Saleh, Afferry and Sidek, Siti Nurfarhana and A. Bakar, Munirah and Wan Ismail, Wan Syarma Adila (2017) Advanced Machining (BETP 3584) Project Arm Link Aerostructural Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Fazly (2016) Development Of Experimental Control Strategy Setup For The Labscale Winding Tension System. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Abd Rahman, Muhammad Aizuddin (2016) Development Of Water Floating Nano Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Zammeri (2014) Machining simulation of composite materials using engineering simulation software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rami, Ainun Zuhairah (2012) Development Of Automatic Vibration Prediction System Of Robotic Arm Structure By Using Analysis Of ANSYS. Project Report. UTeM, Melaka. (Submitted)

Abd Rashid, Abdul Aliff Rahim (2016) Kajian Ultra Kapasitor Ke Atas Motor Elektrik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rashid, Muhammad Hazim (2015) Automating the production of the automotive retainer using the rotary indexing mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Razak, Ammar Fikri (2018) Design and development of rotary jigs. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Razak, Jeefferie (2018) Enhancing Thermo-Mechanical Properties Of Nano-Modified Polymer Composite Material By Modification Of CNT Surface. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Salleh, Mohamad Syazuan (2017) Study of cabin temperature of the car parked under various condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Samat, Muhammad Nizam (2015) Investigation Of Nozzle Height Of Abrasive Water Jet Machining On Mild Steel Gear Surface Cutting Parallelism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Talib, Mohamad Syahaqil (2018) Study On Impact Of Several Types Of Metals In Simultaneous Tire Wrench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Wahab, Mohd Syafiq (2019) Grasping motion control of a robotic hand mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Wahab, Muhammad Nazirul (2019) Development Of Smartphone Based Autonomous Robot Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Zamhuri, Mohammad Huzer (2016) Rekabentuk Dan Simulasi Turbin Angin Paksi Menegak Pada Kelajuan Angin Rendah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Bashir, Aimaduddin Azfar (2018) Design Optimization Of External Coolant Filter For Metal Machining Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Halim, Zakaria (2011) Automatic Room Temperature Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Rashid, Nadia (2016) Modeling And Verification Of Prosthetic Hand. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Abd. Samad, Hasan Basari and Zuraida , Abal Abas and Nanna Suryana, Herman (2009) Development Of Prototype Tool For Heat Transfer Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Wahid, Mohamad Nabil Aiman (2019) Development Of IoT Conservatory Monitoring And Control System For Rock Melon Farm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdillah, Azfar Solihin (2017) Mereka bentuk dan fabrikasi mesin pemprosesan bagi penghasilan biodiesel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Tamaldin, Noreffendy and Mat Tahir, Noor Ayuma (2019) Synthesis Of Grapheme Film From Palm Kernel Activated Carbon Using Chemical Vapor Deposition For Durability Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdollah, Mohd Fadzli and Harun, Mohamad Hafiz and Hashim, Muhammed Noor and Ab Aziz, Azhar and Md Alis, Muhamamd Aizat (2018) Physical Property Modification Of Vegetable Oil Based Lubricant Using Zinc Ion Derivatives. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul 'Alim, Abdullah (2009) Remote Sensing Walker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Azim, Mat Salleh (2009) Surface And Sub Surface Analysis When Hard Turning Of AISI D2 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Mohd Azrin (2009) Energy Efficiency Enhancement At FKE Administration Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Hafizah (2016) Investigate The Viscosity Of Used Engine Oil Before And After Filtration And Enhance By Nanoparticles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Liana (2017) Optimization Of Tribological Performance For Purify Engine-Oil Enhance By Nanoparticles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nurul Hidayah (2019) Effect Of Sintering Temperature And Soaking Time On Microstructure And Mechanical Properties Of Alumina-Chromia Cutting Tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Qayyum Edlee (2016) Propose An Optimum Periodic Supervision On Conventional Shearing Machine At Power Booster Engineering & Maintenance Sdn Bhd Using Reliability Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Siti Nur Adibah (2023) The development of AC voltage controller using microcontroller-based solid state relay. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Faiz , Abdul Rohim (2009) Develop The SCADA System For Automatic Fish Feeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Gaffar, Muhammad Sayyid (2017) Investigation Of Load Bearing Capacity On Different Bio-Lubricant Enhance By Nanoparticles Using Extreme Pressure Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Garapar, Abdul Rahiman (2017) Study Of Glass Tint Effectiveness As Heat Resistant In Buildings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz , Mamat (2009) Ultrasonic Range Finder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Haji, Mohd Faiz (2008) Design And Development Of Shimless Pump Footing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakam, Mohd Ridza (2010) Effect Of Particle Size And Fuel Type On Solid Waste Combustion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakim, Harun (2009) Design Of Automatic Cage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Abdul Qayyum (2016) Water Bill System Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Mohamad Hafizuddin (2019) Development Of IoT Based Smart Auto Gate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Mohd Amal (2014) The effect of cutting parameter on surface roughness during end milling of AISI D2 tool steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Mohd Dzahir (2015) Cutting technology and sintering jig development for manufacturing of hollow structure mat. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Muhammad Firdaus (2019) Improvement Of Hygienic Urinal System Using Integrated Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Mustafa (2012) Smart Automatic Dual Function Lawn Mower With Infrared And Metal Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Tiara Natasya (2019) Voltage Based Coordinating Controller Modelling And Performance Analysis For Islanded Renewable Energy System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim , Jusoh (2015) Design and development of an omnidirectional spherical robot. Project Report. UTeM. (Submitted)

Abdul Hamid, Abdul Muaz (2019) Liquid Level Controller System Without Contact. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Abdul Wafi (2017) Effects of solvent on TiO2 sol-gel thin films. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Hafieza (2016) Solar Powered Fish Feeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Hamidon and Guan, Soo Yew and Norizan , Mohamad and Sani Irwan, Md Salim and Zahariah, Abdul Manap (2005) Industrial Application Of PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Nurul Athirah (2019) Development of machine element of teaching aid for secondary school. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid , Hamidon and Siti Huzaimah , Husin and Yusmarnita , Yusop and Siva Kumar , Subramaniam (2011) Real-Time Public Transportation Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid., Samsiah (2016) Optimizing Traffic Light System For Emergency Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Helmyruddin, Ab Rahman (2005) Conceptual Designing 20 MW Diesel Engine Power Plant For A Remote Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Jalil, Nurfazira (2021) Automated chlorine control system for water tank application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Kadir, Muhamad Syazwan (2019) Position control of electro-hydraulic system using PID-MRAC approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Kadir, Nor Asyraf (2016) Tribological Studies Of Bio-Lubricants On Plastics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Nur Marina (2018) Development Of Automatic Washroom Light And Purifier Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kapor, Muhammad Farhan (2016) Blade Parameters Analysis On The Performance Of Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latif, Mohd Faruq and Aziz, Azwan and Zahmani, Qamar Fairuz and Hashim, Muhammed Noor and Ali, Adlan and Nordin, Abd Khahar and Harun, Mohamad Hafiz (2019) Automated Carpet Washing Machine. Technical Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Latif, Shahida (2016) A design and development of rain-sensing auto window closure for home. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Latiff, Muhammad (2016) Renewable Energy Technology : AIRco Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latiff, Syafiq (2019) Effect of micro drillng parameters on thrust force in micro drilling of CFRP panel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Majid, Burhanuddin (2015) Design A New Bionic Arm To Assists Paralyze Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Malik, Yusuf (2010) Design And Development Of Autonomous Robot Using Digital Fiber Optic Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Manap, Muhamad Naim Fahmi (2017) Investigation of tool wear and surface roughness when machining AISI 1045 with CIP pressed ceramic cutting tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Muhaimin, Arif Hakimi (2023) Prototype of particulate matter detection and monitoring system in air pollution by using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Muhaimin , Mohd Shafie (2013) Wasted Heat Recovery System : How To Gain Energy. Project Report. UTeM, Melaka. (Submitted)

Abdul Muizz , Mohd Muhayeddin (2015) Development of 6 legged hexapod robot (CH3 - R) body kit. Project Report. UTeM. (Submitted)

Abdul Mujid, Ahmad Bukhari (2016) Design and development of outdoor time displaying system. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Munajat, Nurain (2016) Cleaner Production Implementation In Palm Oil Mill. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Mutalib , Abdul Hamed (2008) Modeling And Experimental Identification Of Magnetic Clutch. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Qadir, Osama (2018) Fuzzy logic speed control for induction motor drives. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Samsudin and Sivarao, Subramaniam (2007) Investigation Of Laser Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Muhammad Atikkullah (2017) Design And Development Wind Turbine Generator By Using Arduino. Project Report. UTeM, Melaka. (Submitted)

Abdul Rahim, Nur Ayuni Shahirah (2023) A study on the effect of cutting temperature during milling operation of CFRP material utilizing various tool geometrical design; Router/burr tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Samsudin and Sivarao, Subramonian and Gannapathy, Vigneswara Rao and Wahyono Sapto, Widodo and Safiza Suhana, Kamal Baharin (2013) E-Preventive Maintenance Warning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim , Samsudin and Sivarao, Subramoniam (2007) Experimental Investigation Of Burr Formation In Drilling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Nabil Haikal (2017) Development And Optimization Of Portable Vacuum Clamping. Project Report. UTeM, Melaka. (Submitted)

Abdul Rahman, Sarni Nur Atikah (2015) Development Of Heating, Ventilating And Air Conditioning (HVAC) Control Monitoring System (CMS) Using Arduino Microcontroller In Poultry House Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Hanisah (2018) Design Of Automatic Cat Feeder With Cat's Weight Detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rani, Muhammad Haris (2016) Development Of Flexible Clamping For Drilling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Abdul Azim (2016) Incorporating Flywheel Hybrid Module In Motorcycle : A Conceptual Design Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Ahmad Hafizzuhdi (2016) Design An Automated Guided Vehicle (AGV) Point To Point Motion Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Abdul Rahman (2010) Mobile Robot Multiple Sensor Behaviour For Obstacle Avoidance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Amir Ashraf (2018) Design And Implementation Of LiDAR Navigation System For An Automated Guided Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Afiq (2019) To study the heat insulation from engine toward bus interior. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razak , Shaari (2007) Roboclimb. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rizal, Jokariah (2009) Design And Development Of EGGS Grading And Storing Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Shukor , Abdullah Zam Zam (2015) Effect of TBHQ addition in palm oil as antioxidizing agent in engine oil application : direct introduction method. Project Report. UTeM. (Submitted)

Abdul Syukor, Mohd Jaya and Yogan, Kumar and Ruzaidi, Zamri (2009) Optimization of Hard Turning Machining Parameters Using Swarm Intelligence Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Talib, Din and Mustafar, Kadir and Roslina Aida , Rahimi and Fauzi, Khamis (2013) The Study on the Characteristics and Limitations of Pneumatic Lift for the Building of 4 Storey and Below, for the Development of a Low Cost and Safe Pneumatic Personal Lift. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Talib, Din and Mohd Yazid, Othman and Mohd Yuhazri, Yaakob (2012) The Design And Development Of Water Wheel For Power Generation At UTeM's Main Campus Recreational Lake. Project Report. UTeM. (Submitted)

Abdul Zali, Muhammad Ridzuan (2017) Investigation Of Energy And Cost Effectiveness Between Electric Water Heater And Energy Harvested From 1.0 HP Air Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdulghani Mohammed, Saeed Mohammed (2017) Comparison of linear and intelligent control for a nonlinear electro-hydraulic actuator systems. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdull Azis, Muhammad Zikri (2019) The Development Of Smart Automation System With Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdull Jalil, Amir Shahiran (2019) Tribological analysis of steel against steel contact under extreme by using different types of anti-wear and friction additives. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Aina Athira (2020) Effect of valve flow coefficient (Cv) to the propulsion system of hydro-pneumatic hybrid driveline. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Hatzrill Moestaqim (2018) Optimized PID Controller Parameters Tuning Using Teaching Learning Based Optimization Algorithm For Controlling Actuator Position. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Mohd Helmi (2015) Development of portable water hammer accumulator for domestic water system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Erwan Shah (2016) Temperatured-Controlled Device For Medical Application Using Peltier Effect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Noor Izzati (2018) Design And Simulate Water Vapor Flow In Heat Exchanger By Varying Pitch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Helmee, Suki (2008) Inexpensive PLC Input Port Expansion Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Muttaqin, Adam Shukri (2007) Merekabentuk Struktur Dan Mekanisma Untuk Pemasangan Jig Pencengkam Pada Mesin Ujian Tegangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Suhaimi, Nik Muhammad Asyraf (2024) Mobile robot navigation for building quality assessment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdulwahid Mohammed Aldhubhani, Saeed Abdulhalim (2018) An implementation of fuzzy controller for micro-gripper (MEMS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu, Ahmad Khuzairi (2019) Design of mini coconut fiber crusher and screening machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu, Mohamad Firdaus (2016) Renewable energy powered and monitoring for urban kit system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Abu Bakar, Sabariah (2016) Effect of polycation additive on electrophoretic deposition of surface functionalized boron nitride particles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hanifah, Amirul (2019) Development And Analysis Of Low-Cost Smart Security And Tracking System For Motorcycle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hanifah, Hariz (2017) Introduction Of Double Gyroscope Concept For Motorcycle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hanipah, Siti Aishah (2016) Energy Pricing Optimization By Using Neural Network (NN) For Demand Site Tariff Strategy Peninsular Malaysia Case Study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hanipah, Siti Aishah (2016) Energy pricing optimization by using Neural Network (NN) for demand site tariff strategy: Peninsular Malaysia case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Naeem, Abdul Bahar (2013) Express Sole Dryer (ESD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Samah, Muhammad Raziq (2019) Stress analysis on engine block considering thermal effect. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Talib, Siti Aznur (2016) Continuous Water Level Control Using Ultrasonic Sensor With 45 Degree Cut Pipe Insertion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Ubaidah, Abdul Aziz (2009) Design And Development Of Robot Interface For Controlling 6 DC Motor Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adam, Nur Ashikin (2018) Investigation of mechanical properties and microstructure when processing alumina-based cutting tool under different pressure using cold isostatic pressure (CIP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adam Fitri , Kasni (2015) Development of new bio-lubricant for friction and wear reduction in automotive application. Project Report. UTeM. (Submitted)

Addam , Paat (2009) Light Tracking Device For Solar Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adenan, Nur Solihah (2023) Study of vibration on defects in cordless impact hand drill using statistical analysis method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adli, Abdullah Izuddin (2022) Simulation of the drilling analysis on machining characteristics towards carbon steel using the respond surface methodology (RSM). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Adnan, Hassan (2010) Simulation Study On Active Ambulance Stretcher. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Ahmad (2009) An Automatic Pouring Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Ahmad Sallehuddin (2017) Design and development of dough proofer machine for SMI Bakery Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adnan, Muhamad Nur Hadi (2015) Machining performance of titanium alloy Ti-6Al-4V in milling operation using CVD carbide insert. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adnan, ZainalFirdaus (2018) Development Of Smart Vehicle Blind Spot Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adrin, Davian Ivan (2023) Development of HYDROQS detachable mini portable conveyor – Structure and lifting mechanism. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Afeeqa, Abd Ghani (2015) Cutting Tool Parameter Optimization For Surface Roughness Of Mild Steel Material Using Taguchi Methodt. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afiqah, Ngah Nasaruddin (2015) Energy Audit And Conservation Of Energy In Melaka: Case Study Of Library. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afizrul Iman, Mohamed (2013) Storage Water Tanks Cleaning Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Agus, Mohd Nasip (2019) A Development of Vertical Axis Wind Turbine by using DC Motor As a Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Kamarudin (2009) Vibration Analysis Of Turbine Generator Based On Onboard Data. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohd Syahron Naim (2017) Development of tire pressure alarm system for motorcycles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Fahmirudin (2016) GPS vehicle tracking device using Arduino and smartphone. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Sahril (2016) Performance Evaluation Of Fluid In A Pipe Of Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Syukri (2022) Effect of laser power and speed on surface quality when engraving on aluminium. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad , Ismail (2006) Pembangunan Model Kren Menggunakan PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aizat, Ahmad Ramly (2009) Ergonomics Evaluation And Design Of The Hand Tools Used In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Anas, Yusof (2006) Energy Efficient Fluid Power Transmission Research. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Anas, Yusof and Zairulazha, Zainal and Mohd Khairi, Mohamed Nor and Nor Salim, Mohammad and Mohd Firdaus , Rameli and Khairul Nizam, Khalid (2008) Energy-Saving Compact Hydraulic Power Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Anwar , Hamdan (2008) Study Performance Of Cylindrical Grinding On Surface Roughness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azhar , Omar (2008) Control Of Bus Suspension System Comparison Between Lead Lag Compensator And State Feedback Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azlan Shahibuddin , Abdul Manaf (2008) Feasibility Study On Design Of Grass Removing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Badrun Hisham, Abdul Rahim (2014) Fuzzy logic inverted pendulum. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Dugel, Muhamad Sufian (2017) Implementation Of Safety Divider Downhill Road With The Transmutation Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Edham, Mohammad (2009) Optimal Dynamic Inversion Based Control Of An Overhead Crane. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal, Muhammad Hanafi (2019) System integration for mechanism and test bed of cone laying system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Faizol, Ismail (2005) Developement Of A Low Cost Hydraulic Oil Purifer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizul Bukhari, Mat Tahir (2009) Valve Flow Control Using PWM (PIC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid, Mohamad (2010) Smart Casing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fashli Afif, Abdul Hamid (2015) Electrical Discharge Machining Of AISI 304 Stainless Steel Using Mixture Of Deionized Water And Carbon Nanofiber With Surfactant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faudzi, Muhammad Faiz (2022) Experimental investigation of tool wear progression in turning of NIMONIC C-263 alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Fauzi, Muhammad Fudhail Haziq (2020) Improvement Of An Energy And Economic Assessment Of An Automated Controller Of Air Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fhadli , Salleh (2008) Effects of Tool Length In Milling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Zali (2009) Merekabentuk Prototaip Lampu Isyarat Pejalan Kaki Menggunakan PIC16F877A Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hafizi, Mohamad (2011) Automatic Railway Gate Control By Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hafizuddin, Zakaria (2009) Design And Development Of Smart Poultry House And Eggs Cleaning Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Harris, Abd Hamid (2013) Design Of A Low Cost Portable Heart Beats Monitor Using Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hatta, Abdullah (2008) Design And Development Of Fuzzy Logic Based Level Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hisyamuddin , Hassan (2013) Novel EDM Screw Threading Technique Using Threaded Cavity Electrode. Project Report. UTeM, Melaka. (Submitted)

Ahmad Ismail, Man (2008) DC Motor Speed And Position Control Using Analog PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Jamal, Salim and Abdul Hamid, Hamidon and Muhammad Shahril, Johal (2004) Intelligent Microcontroller Traffic Light System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Jamal, Saidatul Nur Aisyahtun Sakinah (2018) Kinematics analysis of fish robot movements. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Khairi, Ariffin (2015) Development Of Five Phase Induction Motor Speed Using Field Oriented Control Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Khairul Fazli, Nadzri (2009) RF Control Of A Multi-Tasking Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Khairul Radhi, Kamaruzaman (2008) PID And State-Feedback Controller Design By Using Matlab. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Latifi, Yaacob (2007) Investigation Of Machining Defects On Rolled Steel Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Lokman Hakim Oh, Muhammad Faris Syauqi (2019) Development Of Semi-Automatic Mushroom Resting-Cap Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Mokhtar, Muhammad Shauqi (2016) Wear And Friction Profiling Of Zinc Ion Induced Corn Oil Based Bio-Lubricant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Mursyid, Ramli (2015) Speed Control Of DC Motor Using MOSFET. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Musli , Osman (2009) Comparative Study Of End-Mill Performance Between Straight And Spiral Flute. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Mustafa, Ali (2013) A Study Of The Influence Of Cutting Parameter On Surface Roughness And Surface Morphology In High Speed Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Naim, Ismail (2010) Identification And Reduction of Noise And Vibration level On Rear Handle Of Handheld Tools Using Fast Fourier Transform (FFT) Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nasri, Mior Hezeri Akmal (2016) Development Of A Wall Climbing Robot For Cleaning Crude Oil Storage Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nazrin, Ali@Yusof (2015) Analysis Of Heat Transfer In Portable Power Supply. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nidzamuddin , Najib (2008) Development Of Safety System For XY-Table. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nur Faizzy, Ahmad Sabri (2015) The Effect Of Engine Oil On Vehicle Engine Characteristic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rabuan, Ahmad Fadhli (2014) Design of linear conveyor for parts feeding to COMAU articulated robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Rashidi , Ahmad Fauzy (2007) Infrared Robotic Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rasydan , Hasan (2009) An Experiment Study Of The Effect Of RPM On Turning Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Razif, Rabudin (2009) Research Study On The Noise Level At The NGV Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridhwan, Abdul Rahman (2009) Apparatus Embodiment Of Solar Power Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rozi, Shahrain (2015) Surface integrity of AISI D2 when machined with plasma assisted machining. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Sabri, Mohamed (2010) Pemindahan Haba Di Dalam Rumah Dengan Menggunakan Rockwool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Saifulzaman, Raidah Rauhah (2018) Heat Recovery Process In Design And Development Of Integrating Hot Water Dispenser With Portable Air Conditioner By Using Peltier Effects. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Salsabil Zaky, Irfan Zaky (2009) Speed And Position Trainer For Analog P, PI, PD, And PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Salwan , Yahaya (2015) Security hazards alert and prevention system in specific area in industry by using GSM. Project Report. UTeM. (Submitted)

Ahmad Shafiq , Kula (2015) Laser engraving machine. Project Report. UTeM. (Submitted)

Ahmad Sibi, Mohd Yazid (2016) Incorporating Flywheel Hybrid Module In Motorcycle : Prototyping And Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sobri, Dahalan (2011) Pemasangan Kincir Angin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Suzaimy, Sukor (2010) Renewable Energy (Wind Power) Mini Prototype Plant With Scada System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syafiq , Yazid (2015) Design and development of an all terrain mobile robot wheels. Project Report. UTeM. (Submitted)

Ahmad Syahir , Zulkiffli (2010) Effect Of Coil Size To Performance Of Linear Moving Coil DC Motor On Positioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syauqi, Ahmad Shukri (2012) Natural Convective Heat Transfer In Square Enclosures Heated From Below. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syaznan, Mohd Asri (2011) The Design Of A Guessword Game Via PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syazwan, Che Muhamad (2009) Pitch Controller For Aeroplane Using PID Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syirwan Adli, Hamzah (2007) Analysis Of The Influence Of Electrical Discharge Machine Die Sinking Parameters On material Removal Rate Of Mild Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tajuddin, Hamzah (2006) Knowledge Based System For Material Selection In Bumper Beam Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tamin, Haryanti (2018) Development Of Solar Powered River Trash Cans Monitoring Using Global System For Mobile(GSM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Ahmad Witry Quayum, Mohd Nor (2015) Exploring And Designing Actuator For Neonatal Baby's Chest Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusairi, Bani Hashim and Abdul Rahim, Samsudin and Mohd Syafik, Jumali and Cheong, Teik Keon (2008) Development Of Zlatanov-Gosselin Robotic System. Project Report. UTeM, Melaka Malaysia. (Submitted)

Ahmad Yusairi, Bani Hashim (2013) Development Of Open System And Application Mobile Platform For All Terrain Locomation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusri, Che Mat (2009) Automatic Control For Leaching Process. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Yusry, Syahidan Arshad (2021) Solar energy harvester for GPS pet collar. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Za'im, Zulkefli (2010) Design And Fabrication Of Heat Exchanger - Radiato. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaghlul Basha, Fitrah Nur Hidayah (2019) Development Of An Electronic Educational Quiz Board That Test Student Knowledge On Laplace Transform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaghlul Basha, Fitrah Nur Hidayah (2019) Development Of An Electronic Educational Quiz Board That Test Student Knowledge On Laplace Transform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zakhirie , Mohamad (2007) A Study Of Design And Development Of 'Songket' Weaving Automatic Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaki , Abd Razak (2008) Preliminary Investigation Of Automobile Hydraulic Transmission System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaki , Shukor and Fariz, Ali @ Ibrahim (2006) Design And Implementation Of A Search And Retrieval Mobile Robot For Application Oriented And Practical Based Educational Purposes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zhafran , Abdul Rahman Najib (2015) Maze solver mobile robot. Project Report. UTeM. (Submitted)

Ahmad Zharif, Azizan (2008) Control Of Wheeled Mobile Robots. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zubir, Muhammad Abu Huzaifah (2023) Effect of pulse on the surface properties of mild steel using TIG torch process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Zuraimi, Zulkifli (2005) Mekanisma Robot Selari - Pembangunan Bagi Pengasingan Produk Dalam Proses Pembuatan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmed Ismail, Amar Awad Mohamed (2017) Development of obstacle avoidance algorithm for robotic wheelchair. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmed Salem, Mohammed (2017) The investigation of trajectory generation of a curved wall brick laying using 5 Dof mobile robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Ahmed Yahya, Tawfik (2015) Force Characterization Of An Electromagnetic Linear Actuator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aida , Mohd Nazib (2015) Smart flushing toilet system. Project Report. UTeM. (Submitted)

Aidil Fariha, Othman (2008) Vibration Analysis For Diagnostic Of local Faults In Rolling Element Bearing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ain Nadzirah , Azman (2014) PID control tuning using cuckoo search algorithm for coupled tank liquid level system. Project Report. UTeM. (Submitted)

Aisha , Abd Ghani (2010) Design And Development A Line Following Mobile Robot For Multipurpose Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akharuddin, Norzalina (2021) Analysis of a mobile robot equipped with 360 LiDAR utilising gmapping SLAM in indoor and outdoor environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Akin, Gwynnie Chembat (2009) Real-Time Fuzzy Logic Position Controlled DC Motor Drives. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmal, Azmi (2008) Mereka Bentuk Sistem Nozel Automatik Untuk Mesin Pemadam Api Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmal Hakim , Musah (2008) DC Motor Speed Controller Using PIC16F876A. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al Amin, Mohamed Sultan and Mohd Warikh, Abd Rashid and Sivarao, Subramonian (2012) Design and Development of Circular Work Clamping System for Non-Contact Machining Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al-Hattami, Shaher Abdulwahid Hamed (2021) Developing a manual hand pedaling elevator for a wheelchair user. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alexander Samuel, Nick Mathews (2019) Development Of 6-Axis Robot Arm For TVET Training. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Alexander (2017) Investigation of contamination in ball bearing operated under hexagonal boron nitride (hBN) nanoparticle additives mixed with engine oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ali, Mohd Khairulfadzlee (2023) Evaluating electric boat with inboard engine for houseboat vessel. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ali, Muhammad Faez (2016) Fuzzy Logic Controller To Maintain Parabolic Dish (PD) Receiver Temperature Within Safe Operating Range. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Ali Adzha , Ishak (2007) Pengiraan Dan Analisis Bagi Gear Transmisi Menggunakan Pengaturcaraan Komputer Papan Pemuka Bergrafik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Khaled, Ali Al-Farawi (2015) Microcontroller And ZigBee Based Public Transportation (BUS) Awareness System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Othman, Syafiq (2015) To Map 3 DOF Waist Power Assistive Robot Motion Using Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Saif Gamil, Musaab (2018) A critical analysis of PID tuning methods for automatic voltage regulator system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alia Ruzanna, Aziz (2009) Mereka Bentuk Dapur Suria Yang Praktikal Digunakan Untuk Memasak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Aizad (2015) Study on the prediction of cutting tool lifespan towards casting processed product. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Alias, Siti Nur Wafa (2019) Development Of Roll Pineapple Tart Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias , Khamis and Azhar, Ahmad and Azhan, Ab. Rahman (2010) Compressed Air Energy Storage for Power Generation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alwana , Azmil (2015) Study on the improvement of efficiency of thermal energy harvester. Project Report. UTeM. (Submitted)

Alwi, Muhammad Haziq Zafrin (2022) Assessment of surface morphology of laser engraved stainless steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alwi, Zulkefli (2009) Simulation And Control Of Water Tank System Using LabVIEW And Automation Studio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amat Amir, Basari and Mohd Shakir , Md Saat and Khisbullah , Hudha and Zulkarnain, Zainuddin and Adie, Mohd Khafe (2008) Control Of Quarter Car Nonlinear Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ami, Amir Ashraf (2017) Development Of Equipment For Loosen And Tighten Of Lug NUTS By Using Gear Concepts (Special Lug Wrench Tool). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminuddin, Abdul Wahab (2008) Development Of Controller For Back Cover Assembly Station For Flexible Manufacturing System Using Programmable Logic Controller (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminuddin, Ahmad Naufal Hakimi (2019) Design of mini plant for processing of compost fertilizer from dried leaves. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aminuddin, Mohd Saiful Aiman (2023) Signal detection for gear defect of pump system using signal analysis of data acquisition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aminurrashid, Noordin and Mohd Azli, Salim and Mohd Hanif, Che Hasan and Mohd Razali, Mohamad Sapiee and Sulaiman, Sabikan and Zamani, Md Sani (2011) Development Of 4-Legged Walking Robot And Movement Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir, Halil (2009) Preliminary Design Analysis Of Hydraulic Transmission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Aizuddin , Yusoff (2006) A Study Of Surface Integrity Whilst Turning Aisi 1045 Steel With Tic Al203 Coated Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hafizul, Abd Malek (2014) Automatic Trolley Human Follower. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hamzah, Nur Aqila Syamimi (2020) Tribological performance of grease with different types of additives. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amir Shah, Nurhanani (2019) Comparison between double-PID+LQR and LQR controllers for rotary inverted pendulum. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amir Suffian, Norshahri (2008) Radio Frequency Controlled Stairs Climbing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Syarifah Harahara, Amir Alwi (2014) Mini Solar Powered Robotfarm For Plant Seeding With SMS Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirrul Adha, Sulaiman (2015) Interactive Multimedia System By Using Hand-Gesture Motion Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiruddin, Omar (2012) A Study Of Maintenance Design System For Industrial Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Aizat , Mohd Razali (2012) Hybrid Learning Control Schemes With Input Shaping Of A Flexible Manipulator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Farhan, Mohd Salih (2010) Design A Bending Machine For Bowl Feeder Attachment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Farhan , Mohd Salih (2010) Design A Bending Machine For Bowl Feeder Attachment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Fariq, Ramly (2009) Design Of Automatic Gate Powered By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Nizuan, Mohd Kasbollah (2005) Membina Satu Model Kecil Turbin Dedenyut Bagi Tujuan Pembelajaran Dan Kajian. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiza, Abu (2010) Monitor And Control Greenhouse Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ammar , Mohd Saufian (2007) Roboclip (Pencengkam). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Muhamad Syariz Syazwan (2023) Effect of B20 and B30 palm oil biodiesel on performance and exhaust emission of a diesel engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amran, Nur Hazira (2018) The Correlation Between Machinibility And Surface Roughness In CNC Lathe Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amzah, Mohd Nuralim (2016) Development Of Portable Air Compressor By Using A Battery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anaam, AbdulRahman Taher Ahmed (2017) Study air flow distribution in the dryer system through CFD simulation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anandaraja, Sharveen (2024) Design and prototyping of motorcycle racks for food delivery bags. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anbalagan, Munusamy (2009) Application Of XY Table Continuous Motion Programming With PC Based Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Andy, Heng Poh Seng (2015) Tracking Performance Of A Hot Air Blower System Using PID Controller With PSO And Harmonic Search Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Ling Yuen (2013) Simulation Of Intelligent PID Temperature Controller. Project Report. UTeM, Melaka. (Submitted)

Ang, Chee Hang (2019) Design And Development Of Chlorine Control System For Swimming Pool Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ang, Ke Xin (2019) Energy And Economic Assessment Of Using Temperature Controller In Air-Conditioned Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Ruo Li (2016) Potential Study On Wind Turbine Generation By Vehicles Vortex On Highways. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anne Siaw Fung, Wong (2006) Self-Powered Distance Detector Using Vibration Based Power Generation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anthony, Angelin (2020) Solar irradiance forecasting using global Positioning system(GPS) derived total electron content. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Mohd Sabri (2008) Lecturer Room Director/Message Board. Project Report. UTeM, Melaka Malaysia. (Submitted)

Anuar, Nur Athirah (2018) Study On Energy Comsumption Of Different Blade Sharpness For Grass Cutter Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Shairazi Akmal (2019) Development Of Aquarium Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Mohd Syarizal (2015) Effect of different coating layer of alkali niobate (knn) thin film through sol-gel technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar , Mohamed Kassim (2011) Research and development on motion control for one legged type hopping robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar Haszuad, Abdul Halim (2008) PC Based Device Switching Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar Muhibbuddin, Noh (2009) Design And Development Of Inclined Batch Dryer (IBD) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar Muhibbuddin, Noh (2009) Design And Development Of Inclined Batch Dryer (IBD) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Apparao, Urmilaa (2022) Development of smart infant car seat using a microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aqmal Hisyam, Hamzah (2015) Remotely Operated Contruction Robot Tele-Operation Command And Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arbain, Nurul Afiqah (2021) Study on the effect of water contamination on zinc Dialkyldithiophosphate (ZDDP) additive in lubricant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arfah , Ariffin (2009) Wheelchair Movement Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Argenan, Kugan (2017) Development of a simple robot with human-robot interaction (HRI) features. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arif, Ahmad (2010) Numerical Prediction Of Solid Waste Combustion In An Updraft Gasifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arif Hadafie, Idris (2005) Kawalan Peralatan elektrik Berasaskan Mikro Pengawal Menggunakan Isyarat DTMF. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arif Zaim, Zawir Abdullah (2015) Development And Analysis Of Obstacle Avoidance Algorithm For Robotic Wheelchair With Shared Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariff, Afif (2015) Development Of Wind Turbine Generator Trainer Set Using PIC System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariffin, Nur Amelia (2017) Development Of Small Energy Generation From Vehicle Movement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ariffin , Hashim (2007) Research On Mechanical System Used In Oil And Gas Industry (Research And Improve Mechanical Seal). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arman Shah, Abdullah (2009) Design Of Timing Chain Cover Assembly Jigs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arshad, Munirah (2015) Sleeping Sensoring And Alerting Devices For Drivers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arumugam, Sativelo (2008) Automated QA Inspections Using Vision Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ashafi'e , Mustafa (2013) Tribological properties of nanoparticles as lubricating oil additives. Project Report. UTeM, Melaka. (Submitted)

Ashok, Rajandran (2011) Interfacing Of Microcontroller To Circulator Using Embedded C Programming In Development Of Fiber Optic Surface Roughness Measurement Using Time Of Flight. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asmawi , Hidayatul Syakira (2015) Design And Development Of Miniature Size Automatic Storage And Retrieval System (ASRS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asmida, Asri (2015) Pigeon Hole Smart Box For University Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asniza , Muhidin (2007) Automated Juice Mixer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asru Rozimin , Abu Bakar (2007) Programming And Interfacing Master Slave (Parent-Child) Robot For Painting Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asrul Izwan , Mohd Salleh (2007) Roboclimb (Body And Traverse). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asyraf, Amir (2011) The Development Of Adaptive Lighting System For Motorcycles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asyraf , Abd Razak (2012) Energy Efficient Of Automatic Ceiling Fan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Atan, Ali Syahiran (2019) Performance Analysis Of Path Planning Algorithm For Autonomous Mobile Robots. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Atifa Faaidha, Munauwer (2012) Development Of Prototype Neutral-Less Time Lag Power Switch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aw, Fang Li (2011) Self-Monitoring Traffic Light System For T-Junction Or Multiple Junctions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awaludin, Arif Nazmi (2009) Lecturers Students Friendly Attendance Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Nurul Nadiah (2017) Investigation Of Friction Characteristics Of SAE 15 W40 Conventional Engine Oil With Nano Additive. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Man, Karimah (2008) Car Park Gate Control System Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Mu'Awaludin, Ahat (2006) Computer Aided Education For Control Systems: Pid Controller Design Of Closed-Loop Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Muhammad Mursyidin, Ahat (2009) Control Of A Real Inverted Pendulum Using PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayob, Muhammad Hilmi (2019) Development Of Smart Aquaponic System For Eco School Project. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azahar, Ain Hafizah (2019) Development Of Report Submission Box With Tracking And Monitoring System For Lecturer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azali Firdaus, Mohd Yusoff (2011) Traffic Light For Construction Safety System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azam , Ahmad (2006) The Development Of A Hydraulic Flow Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azan, Amar Shafiq (2016) Development Of An Automated Helmet Dryer Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azan Hariz , Ab Latif (2010) Nonlinear Controller For Gantry Crane Based On Partial Feedback Linearization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azdiana , Md Yusop and Noor Asyikin, Sulaiman and Roseliza, Yatim and Siti Halma, Johari (2011) An Adaptive Input Shaping Scheme For Vibration-free Positioning Of A Gantry Crane System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azdiana , Md Yusop and Noor Asyikin, Sulaiman and Roseliza, Yatim and Siti Halma, Johari (2011) An Adaptive Input Shaping Scheme For Vibration-free Positioning Of A Gantry Crane System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azemi, Mohd Qhaireel (2019) Development Of Low Cost 3-Axis Desktop Router And Plotter Machine For Educational Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhar, Mohamad Suhairy (2018) Smart Home Monitoring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Azhar, Mohammad Ashraff (2017) Development Of Speed Control For An Electric Bicycle By Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhar, Anis Afuza (2015) Investigate surface roughness of aluminium alloy 2024 under wet and dry conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhari, Nur Afifiah (2015) Preliminary Study Of The Availability Of The Using Gear Lube Oil Based On Local Palm Oil For Transmission Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azimi, Ab. Rashid (2011) Ergonomics Assessment Of Sheet Metal Cutters. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azinuddin Akmal, Abdul Aziz (2010) Design And Development Of An Automated Sorting System In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azira, Abd Rahman (2009) Smart Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azis, Ahmad Faizal (2016) Incorporating Flywheel Hybrid Module In Automobile : Simulation And Analysis Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Muhammad Haziq (2016) Incorporating Flywheel Hybrid Module In Motorcycle : Simulation And Analysis Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Nurul Afina (2018) Development Of Human Fall Detection System For The Elderly. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizan Firdaus, Mohamad (2007) Kawalan Frekuensi Lampau Lebih Dan Kurang Pada Model Turbin Gas Menggunakan Pengawal Tambahan Logik Fuzzi. Project Report. UTeM, Melaka. (Submitted)

Azizi , Kamaruddin (2007) Design And Development Path Finding Robot Using Line Tracking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizi, Muhammad Azizul Raziq (2018) Ankle Rehabilitation System For Sprain Ankle Patient's. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Azizizol, Nurul Fazira (2021) Investigation of thermoacoustic cooler. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizul , Ahmad (2008) Integrated Filling And Capping System In Bottling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Asri , Subbi (2013) Mobile robot using GPS module. Project Report. UTeM. (Submitted)

Azizul Hakim, Noor Zubairi (2015) Portable Power Generator From Renewable Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hakim , Mohamud (2009) Investigation On Relationship Between Ultrasound Faults With Hot Spots On Incoming Cable At Distribution Transformer. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azizul Halim, Abd Rahman (2010) Fiber Optic Based Line Following Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan, Mohamad (2008) Analisis Pengangkat Galah (Pole Lifter Analysis). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan, Muhammad Fitri Aiman (2017) Investigation On Tool Paths Programming Strategies Using CATIA V5 To Fabricate Biomedical Application On Simultaneous Five-Axis CNC Milling Machine. Project Report. UTeM, Melaka. (Submitted)

Azlan, Surahman (2015) Friction Analysis Of Common Engine Lubricant In The Market For UTeM Formula Varsity Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azli, Muhammad Asyraf (2017) Numerical Solution Of Nanofluids Flow And Heat Transfer Over A Moving Surface With Thermal Radiation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azli, Siti Nurazeera (2017) The effect of number of blades on compressor cascade bladesperformance by using 3D CFD. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azli Imran , Alias (2008) Robot Mudah Alih Kawalan Motor Servo RC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlina, Basharudin (2011) Smart Incubator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azly, Ahmad Nur Iman (2024) Development of 3-axis traverse system using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Mohamad Afiq (2023) Effect of B10 and B100 palm oil biodiesel on performance and exhaust emissions of a diesel engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Mohammad Nur Shafiq (2017) Development of light Pneumatic Artificial Muscle (PAM) for positioning task. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Mohd Arshad (2017) Development Of An Electronic Board That Identify And Check The Functionality Of The Commonly Used Arduino's Component (Assorted Component Checker). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Nurul Azliyana (2016) Development Of Public Transportation (Bus) Notification Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Yuhanis Aqilah (2017) Preliminary study on the effect of spray coatings parameter on hydrophobic coating surfaces. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman , Amiruddin (2008) Control Of Ball And Beam: Comparison Between Lead/Lag Compensator And State Feedback Controller (SFC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman Hafiz, Hj Abd Majid (2006) Analysis And Optimization Of Heat Recovery System For Process Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman Shah, Muhammad Faridzwan (2019) Development Of Rice Cooker Integrated With Arduino Controller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmeer Zakki , Mohd Harith (2009) Robot Dance Using 68000 Microprocessor Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmin, Ahmad Faris (2016) Human robot interaction (HRI) using simple, interactive robots. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmir, Abu Samah (2010) Optimization Of Louvered Plate Angle Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrai, Muhammad (2010) Programming Of An Automated Pick And Place Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azri, Muhammad Aiman Aqil (2022) An energy analysis of water jet process using random forest method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azrin , Maharani (2008) Design And Model Making Of Hemming Jig For Car Door Assembly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrina, Abdul Halim (2013) Process Of Abrasive Grinding Computer Numerical Control (CNC) Machine To Grind Tooling And Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul Affendi, Atan (2010) Design Optimization Of A Boiler Furnace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul Hiza , Muhamad Azraai (2007) Rekabentuk Kipas Penyejuk Segar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azzad Firdaus, Zolkepli (2008) Electronic Combination Lock Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Baba Noor, Nuratiqah (2012) Natural Convective Heat Transfer In Square Enclosure With Partition On Top Wall. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Amri, Abdul Rahman (2006) Merekabentuk Konsep Dan Model Jek Kereta (Alat Bantu Kecemasan) Jenis Mekanikal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrulhisham, Norma (2024) Design and development of burger's patty forming machine for small medium enterprise (SME). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bagas, Wardono and Sivarao, Subramonian (2008) Quality And Performance Analysis Of Laser Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahari, Mohamad Aizat (2016) Analysis Of Fin And Hole Effect Towards Air Velocity And Energy Absorption During Impact Test For Bicycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahari, Rafida (2018) Parameter Tuning For Proportional-Integral-Derivative Controller In Gantry Crane System Using Simulated Kalman Filter Algorithm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahran, Ali Izzuddin (2016) Identification And Parameter Estimation Of Multifunctional Prosthetic Hand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahran, Ali Izzuddin (2016) Identification and parameter estimation of multifunctional prosthetic hand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bakar Redin, Luqman (2018) Automatic Irrigation System With IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bakri, Mohamad Syafiq (2022) Design and manufacturing improvement of river trash collecting system (RTCS) scissor lifter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Balai, Lorita Lawi (2016) A study to propose solution on palm oil mill screw press machine breakdown using QC tools. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Balakrishnan, Ruvendran (2022) Influence of drill geometry on hole quality in drilling hybrid carbon fibre reinforced polymer (HCFRP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Balakrishnan, Surendran (2024) Enhancing battery life and safety in remote control cars through real-time IoT monitoring system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ban , Shu Wen (2008) Smart Kart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baskaran, Roshini (2020) Design and analysis of automated whiteboard cleaner. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Basri, Syahrul Zhafri (2019) Study Of Thermal Effect On Viscosity And Surface Tension Of Metalworking Fluids. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Batumalay, Kalaiselvan (2018) Design & Development Of Multiple Spin Type In Table Tennis Trainer Controlled Via Android Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Beh, Teik Siong (2007) LED Bending Machine Fixture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Blangkat , Ahmad Basimin (2006) Self-Sustaining Solar Powered Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bong , Siaw Wee (2008) Vibration-Free Positioning Of A Gantry Crane System With Inverse Dynamic Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Borhan, Luqman Hakim (2017) The effect of number of blades on turbine cascade blade performance by using 3D CFD. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Briyatharsini, Ramu (2018) Disturbance rejection analysis for wastewater treatment plant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bunyamin, Yahaya (2006) Cooling Tower In Steam Power Plant: Its Performance Regarding The Flow Rate Control And Water Make Up Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Buyong, Zulhafiz (2016) Conveyor Speed Control Application Based On PID Control Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

C. Prem Anand, Chandia Sekhara (2011) Low Maintenance Aquarium - Automatic Controller System For Water Level Sensor, Temperature And Food Dispenser System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Camillus, Jeremiah (2021) Conceptual design of gravitational force turbine for roof top application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cassandra, Leong Chai Ee (2015) Development Of PIC Based Safety Vehicle System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chah, Gan Peng (2005) Utilization Of Empty Fruit Bunches As A Combustion Fuel To Generate Steam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai, Chi Kong (2005) Study On The Application Of Variable Speed Drive To Achieve Cost - Effective Electricity Saving. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chakravarthy Gopala Krishna, Kaliappan (2005) Semi Auto Filling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cham, Kah Yi (2016) Design And Development Of Hand-Glove Controlled Robot Arm System. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Chan, Seng Kiong (2008) Line Detecting Mobile Robot For Delivering And Receiving Loads To Different Set Points. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Wai Weng (2009) Influence Of EDM Machining On Surface Integrity Of SKD 11 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Zhi Hao (2013) Development Of Self-Powered Dual-Axis Solar Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Chee Hoong (2017) FEM analysis on face milling of Inconel 718. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Chun Yuan (2016) Development Of Control Strategy For Motion Control Of Pneumatic Muscle Actuator. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Chan, Guan Zen (2009) LCD Display Of Lab Status. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Jien Yang (2018) Development Of RF Energy Harvesting Multi Controlled Floor Vacuum Cleaner Using Wi-Fi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Jing Ting (2017) Improving Densification Of Alumina-Based Ceramic For Cutting Tool By Using Different Sintering Profiles. Project Report. UTeM, Melaka. (Submitted)

Chan, Wai Kit (2022) Performance of AISI 1045 steel of simulation turning process base on previous experimental result. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Chan , Bee Ngo (2008) Turtletron Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Chow Khuen (2008) Design And Development Of A Control System Based On Engine Speed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Kok Thai (2008) PC Based For Power Failure Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Mei Yee (2009) The Study Of The Aggressive Turning Process On Aluminium For Automotive Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chandran, Devaagar (2016) Investigation phenomena of flank wear at initial stage during cutting process of stainless steel 304. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chandrasakran, Yogesvaran (2019) Vertical Axes Wind Turbine Power Source For Campus Area With IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Ling Kwai (2013) Portable Physiotheraphy Limbs Rehabilitation Robot - Structural Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Kok Leong (2015) Examination Of The Appropriate Equivalent Cylinder Radius For Buckling Of Cones Under Axial Compression. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang , Nen E (2007) Omni-Directional Hexapod Walking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Charlseak, Charisa (2017) Design, Analysis And Development Of Frame, Body And Mechatronic System For A Tennis Court Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Bakar, Siti Munirah (2018) Logic Gate Simulator : Development Of An Electronic Educational Simulator To Produce Karnaugh Map By Logic Gate Combinational Circuit Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Hamdan, Muhammad Arif Farhan (2023) Signal detection for centrifugal pump using signal analysis of data acquisition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Harun, Muhammad Harraz (2016) Development Of A Mobile Robot Vision For Object Detection And Tracking Using Pixy Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Hassim, Muhammad Dzulhelmy Che Hassim (2019) Design Of Experiment (DOE) based approach in optimizing finishing parameters of CNC machining toward surface roughness. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Japar, Muhammad Jamal Hafiz (2019) Development Of Garbage Monitoring Systems By Using Ultrasonic Sensor To Help The Sanitary Agency Monitor The Garbage In Area. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Ku Junoh, Sahida (2016) Design of model reference adaptive control (MRAC) for machine tool applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Mohd Elyas, Che Omar (2010) Investigation Of Shaft Speed Cause By Turbo System In Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Nor, Che Muhamad Hamzah (2014) Study on cutting parameter on kerf width using WEDM of inconel 718. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Roizimi, Muhamad Shafiq (2016) Development of cutting technology for cutting polymer foam material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Shaari, Murni (2017) Comparatives studies of Load Frequency Control (LFC) using Proportional Integral (PI) controller and Fuzzy Logic (FL) controller for two area power system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Soh , Mohd Norhisham (2009) Forward Kinematics Solution For 5 Degree Of Freedom Of Rhino XR-3 Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wan Mazlan, Che Wan Mat Zin (2010) Sound Detecting Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wan Muhammad Ridhuan, Che Wan Razaley (2014) Small wind energy converter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Wan Nurul Hidayah, Che Wan Zakaria (2008) Pic Tape Measure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wan Shah Rizam, Che Wan Yem (2006) Controlling Device For Automation Of Heat Flow In Confined Spaced. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Voon Lu (2007) Design And Implementation Of A Warehouse Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Di Quan (2019) Development Of Remote Monitoring And Control Of Keyless Entry System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah Wern Xien, Joshua Bryan (2024) Development of navigation system for TurtleBot 3 using SLAM method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chee, Eric Sai Hoo (2009) PID Of An Inverted Pendulum. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Kai Sin (2017) Development of an automated coolant system for CNC machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chelvakumari, Arumugam (2010) Plant Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheok, Yong Seng (2007) Manually Guided Robot With Minimum 5Kg Of Load. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheok, Yan Qi (2019) Development Of Home Use Ankle Rehabilitation Device Using Force Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheong, Yew Ching (2022) A comparative analysis of fused deposition modelling machine performance. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Cheong , Teik Keon (2008) The 4-Dof Parallel Robot Fabrication And Design Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Yee Yuen (2021) Power saving analog reservoir computing system design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew, Yiying (2016) Automatic Suction Control Of Electrical Vacuum Cleaner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Xiao Lin (2014) Modeling sit to stand motion of humanoid robot using telescopic inverted pendulum for predicting stable motion. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chey , Long Sheng (2011) Sliding Mode Control (SMC) In Friction Compesation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chi, Lai May (2016) Analysis and improvement of extrusion machine breakdown in solder wire manufacturing operation using QC tools. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chia, Eileen Mei Ping (2014) Influence of parameters on the overcut and surface roughness of deep cavity feature using EDM die sinking. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chia , Hwee Siang (2009) Investigation Of Turbine Blade Failure And Stress Distribution By MSC Nastran Patran In Cargo Ship Turbocharger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Wen Yung (2014) Crawler type robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chiang , Kok Wai (2009) Optimization Of Machining Parameters In Laser Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiew , Tsung Heng (2011) Cutting Force Compensation Analysis Using Sliding Mode Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Jia Yu (2017) The effect of flow frequency on heat exchanger used in thermoacoustics. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chin, Kwang Yhee (2016) Energy Efficiency In Water Pumping System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Zhen Yan (2017) Development Of Automatic Air Humidity And Temperature Controller With Purifying Function Controlled By Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cho, Wei Yang (2015) The Effect Of Plate Geometry On Flow And Heat Transfer Across A Parallel Plate Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choi, Yoke Pool (2009) Development Of Low Pressure Water Hydraulic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Kok Hee (2009) Expansion Of Input / Output PIC OMRON CJ1GCPU42H Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Mei Ching (2012) Livestock Autofeeding And Monitoring System (LIFE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Min Po (2012) "You Have Mail" A Pigeon Hole Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Pei Ching (2009) Design An Automated Storage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Chean Yee (2019) Identification of pipeline cracking area in underwater environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Fei Ming (2017) To design an innovation coconut plucking rod with advance mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Man Yuen (2010) Bidirectional Converter For Renewable Energy Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Peh Han (2018) Design And Analysis Of Passive Knee Exoskeleton. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Sheng Wah (2015) Topological Optimization Of Vehicle Jack For Weight Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Yoon Soon (2016) FPGA-Based Hexapod Robot Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choon Whey, Tan (2017) Design And Development Of A 5-DOF Robotic Arm And Movement Controlled By Android For Pick And Place Tasks. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choong, Kwan Hun (2005) Modeling And Simulation Of 3 Degree Of Freedom Of Robot Manipulator. Project Report. UTeM, Melaka Malaysia. (Submitted)

Chou, Aw Lin (2020) Heat transfer enhancement through the use of vortex generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chow, Jia Le (2016) Conceptual Design Of Mini Wind Turbine For Household Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chow, Zhi Chin (2018) Design And Analysis Of Gripper System For A Mobile Robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chowdhury, Tanha (2023) Implementation of vector control on electric vehicle traction system by PID gain scheduling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choy, Ying Yi (2009) Leaching Process Of Nata De Coco - Automation System Design And Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Christopher, Calven (2019) Motion control of a mobile robot for uneven terrain. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Christopher, Christer Ruben (2017) Design And Development Of A Novel Water Distiller Using Fresnel Lens. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Denis Kiang Wui (2009) An Accuracy Study On The Positioning Of The Pick And Place Manipulator Trainer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua , Ka Hui (2010) A Study On The Quality Of Micro Hole Machining Of Tungsten Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua , Yee Ling (2009) Design And Develop A Mobile Robot For Pick And Place Application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chuay, Han Shen (2018) Microcontroller-Based Terminal Identifier For Single Phase AC Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chun Woon, Chen (2016) Wireless Robotic Arm Control Using Myo-armband. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Coomerasamy, Punethen (2019) Design of cooling system for TEG in generating electrical energy from waste heat at night market. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

D

D., Sugumar and Chong, Kuan Eng (2005) Thermal Analysis Of An Inclined Micro Heat Pipe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Daniel, Jonathan Dave (2019) Design and development of automated front lighting system with sensor integrated for urban car concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Darus, Sharulnizam (2019) Development Of Fruit Separation Device Using Color Sorting For Food Industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Darwis, Zulhalmi (2011) Design Of Water Level Control Training Kit. Project Report. UTeM, Melaka. (Submitted)

Daud, Mujibur Rahman (2019) Simulation on trajectory planning of KUKA LBR4+ robot via three points using VREP simulator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dayang Nor Fatin, Mahmud (2015) Comparative Tribological Investigation Of Bio-Lubricant Formulated From Waste Cooking Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

De, Chee Keong (2011) Smart Classroom Using LabVIEW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Derai, Gowdie Palmer (2017) Real time monitoring and water leakage detection system in underground pipeline. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Derrick, Patrick Charles (2018) Development Of Solar Power Assisted Flood Alert System With GSM. Project Report. UTeM, Melaka. (Submitted)

Dharham, Dharmawan (2017) Electronic throttle body tuning using non-linear PID controller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dinesh Kumar , Murugian (2007) Design A Solar Powered Water Pumping System For Typical Household Requirement. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Divan, Tarmalinggam (2009) Speed Control Using Fuzzy Logic Technique (Application In Automotive). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dnash Kumar, Mohan (2012) Smartphone Controlled Mobile Security Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dol, Mohammad Shamrin (2016) Smartphone Control Legged Robot. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Dora , Jau (2006) Design And Implementation Of An Automated Work Piece Loader Indexer Table Station Using Sensor And Programmable Logic Controller (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

E, Chao Cher (2011) A Robot Hand With Data Glove Inputs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E, Chao Cher (2011) A Robot Hand With Data Glove Inputs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ee , Leng Hong (2008) PIC PWM Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elain, Elweelee (2017) Analysis Of The Factor Affecting The Consumption Of Energy And Energy Trends In Factory 2 FTK,Using Statistical Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Elizabeth Dimah, Anak Mula (2006) Perfomance Of Different Types Of Heat Exchanger Designs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elmi Shah, Mohd Khafe (2005) The Traffic Light Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Emelia Ernie , Kamaruzzaman (2008) Merekabentuk Sistem Pengering Pakaian Automatik Menggunakan Kaedah Fuzzy Logic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Engku Azizuddin, Engku Muhamad (2009) Small Scaled, Low-Powered Electric Car Drive Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Erasoffinasari , Amirshariffuddin (2007) Solar Powered Plant Watering System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Erin Rabiatul Charmein, Noor Chaman (2015) Affordable System Preventing Deaths Of Children When Accidentally Left In Parked Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Evelyn, Usun Kasing (2017) Design And Development Of Solar Powered Smart Dustbin For Domestic Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ezra, Abdul Mutalib (2015) Development Of Conceptual Jig And Fixture For The Tie Plate Using Integrated FMEA And AHP Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fadhli Shahir , Zakaria (2012) Design And Implementation of Elevator Controller On A FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhlinasri , Yusop (2005) Sound Detector Walker Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhliza, Abdul Latip (2006) Heat And Mass Flow Predictions Through A Compact Heat Exchanger Unit (CHE) With Induced Flow Using CFD Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadli Rohaizi , Mohd Napiah (2009) Balancing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadzli, Siti Nazatulsyima (2016) Optimal PID Controller Parameter For Coupled Tank System Using Priority Fitness Firefly Algorithm. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Fadzlin , Md Fadzil (2007) Automatic Escalator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fahmi , Samat (2013) Design of conceptual smart trash can. Project Report. UTeM. (Submitted)

Faiezul, Zainal (2007) Design Of Jig And Fixture For Milling Machine, Case Study - Cylindrical Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fainul Hisham, Muhammad Fikri (2018) Plant Watering System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fairulazri, Mohammad Koshim (2008) Pole Lifter Mechanism (Mekanisma Pengangkat Galah). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairuzradzi , Md Yusop (2008) Membangunkan Dan Menganalisa Sistem Hidraulik Air Bertekanan Rendah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizal, Idris (2009) Controlled Conveyor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizal , Ahmad (2009) Vibration - Free Positioning Of Gantry Crane System Using Impulse Shaping Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizil, Wasbari (2013) Enhancing Eco-Friendly Hydraulic Technology: The Development Of Low Pressure Water Hydraulic Manipulator For Small And Medium Industries In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizul Azdi, Amat Puadi (2008) Laci Simpanan Barang Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Sharidah, Ab. Gafor (2013) Automatic Toilet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Umaima, Miswan (2008) Drilling Of Aero Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Abd Kadir (2011) Design And Analysis Of Mobile Robot For Road Side Curb Painting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Abd Razak (2008) Control Of 2 Dimensional Inverted Pendulum Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Md. Lazi (2012) Cost Saving Campaign. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faris Adam , Mohd Ghazali (2013) Mobile Robot Motion Planning Based On Notion Of Artificial Potential Field (APF). Project Report. UTeM, Melaka. (Submitted)

Fateh Sakinah, Abu Bakar (2015) Evaluation Of Energy Consumptions In Chicken Slaughtering Industry Using Cleaner Production Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faten Nadia, Mansor (2010) Tank Water Level Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimah Al Zahrah, Mohd Sa'at and Nor Azmmi, Masripan (2009) A Feasibility Study And The Design Of A Waste Heat Utilised Cloth Drier For Household Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimahtul Adnin, Sulaiman (2009) A Study On Graphite Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Nabilahhuda, Zahari (2015) Thermal Properties And Heat Transfer Study Of Dispersed Fluid With Functionalized Multiwalled Carbon Nanotube Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Syakira, Mohd Hassan (2015) Pneumatic Driven 180 Degree Rotation Pick And Place Mechanism With Conveyor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauzi, Muhamad Afiq Afifi (2018) Marker-based tracking under extreme illumination : Feasibility study and pilot testing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fazila , Aziz (2009) Data Logger Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fazly, Buang (2010) Modeling And Simulation Of Horizontal Wind Turbine Blade. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ferland, Karshiff Sirinus (2016) 3D Milling Machine Using LEGO Mindstorm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fikri Naim, Mohd Rosli (2012) Hexapod Robot Motor Controller Using FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fiona Serina, Daud (2014) Modelling and pso-based LQR controller design for coupled tank system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Firdaus, Bachok (2006) Obtacle Avoidance Robot Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firdaus, Hassan (2005) Kawalan Kelajuan Motor Arus Terus Menggunakan Pengawalmikro. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong, Kar Weng (2012) Inhomogenous Color Object Recognition Using Monochromatic Based Technique With Monochrome Camera And Color Filter. Project Report. UTeM, Melaka. (Submitted)

Fong, Yan Li (2013) Quality Investigation Of Laser Wood Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong, Zuyang (2019) Enhancement Of Robot Haptic Sensor Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong , Yee Siang (2009) Effect Of Fuel Moisture Content On Solid Waste Combustion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Jia En (2015) Positioning Control Of A Ball Screw Mechanism Using Disturbance Observer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Wai Ken (2015) Design And Development Of Test Fixtures And Tools For Shear Test Of Fastener. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Yoong Kin (2015) Emergency Mobile Contacts Using Android Application System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Freddy Hock Boo, Loy (2005) Heat Transfer From The Finned Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fung Yap, Tian (2008) Handheld Environment Meter. Project Report. UTeM, Melaka. (Submitted)

Fuzairin, Mat Noor (2006) Design Electro-Mechanical Line Tracking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

G. Thinesh Kumar , Ganasagaran (2011) Low Maintenance Aquarium : Automatic Controller System For Lighting, Oxygen And Filter System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Melvin Yeou Wei (2017) Design framework to optimize the walking curve of Klann Mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ganapathy, Vikram Varma (2019) Design and fabricate roller for sticker on car windscreen to improve blind spot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ganasegaran, Yohen (2022) Rice husk ash as heterogeneous catalyst support for conversion of waste cooking oil to biodiesel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ganesan, Hema Nanthini (2015) Simulation of cutting force during high speed end milling of inconel 718. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Geris, Brynald (2022) Development of O-ring jig for mechanical testing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ghazalli, Ainun Najiha (2018) Analysis Of Wind Speed Data And Wind Energy Potential In Melaka Using Weibull Distribution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ghee, Yih Farn (2016) Development Of Hand Gesture Glove To Control Robot Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghulam Shabir, Muhammad Syazwan (2017) Development Drill Press Stand For Portable Electric Drill. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Gavin Heng Yau (2021) Design and development wind turbine system for harvesting wind energy on highways. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Goh, Jee Boon (2015) Design & development of regenerative system for cooling tower system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Goh, Ong Sing (2004) An Intelligent Robot System (IBOT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Ong Sing and Mohd. Shamsuri, Md. Saad and Rahman, Hashim and Lee, Mei Ph'ng (2004) A Global Internet-Based Crisis Communication : A Case Study On Sars Using Intelligent Agent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Wei Jun (2014) Design of robot head for expression of human emotion. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Gopala Krishnan, Durka (2021) The thermal energy transfer across solid-liquid interfaces of methane and 111 Face Centered Cubic (FCC) surface for ultra thin liquid film thickness. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Gopalakrishnan, Mittiraan (2023) Performance investigation on a capacitive soil moisture sensor for smart home irrigation system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Guna, Raja (2009) Automated Speed Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gurdir Singh, Amardeep Singh Dhillon (2018) Development Of Hardware In Energy Harvesting From Burning Process VIA IoT Based System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gwee , Chiou Chin (2008) Design And Modeling Of Multiple Tank Control For Fluid Circulation System Using Fuzzy Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Ha, Hei Kuai (2005) Real Time Clock Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Habibah, Jamaludin (2006) Performance Test Methodology For 3 - Axis Machining Center. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hadifnafila, Selamat (2009) Automated Water Pouring System Using 68000 Microprocessor Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafiz, Hashim (2009) Pemodelan Enjin Dua Lejang Dalam Perisian Simulasi "GT-POWER". Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafiz, Nur Afifa (2017) Design And Development Of Testing Rig For Resemblance Of Tidal Phenomena Using Solidthinking. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hafiz , Nazar (2009) Automatic Control Room Temperature Using PIC With LCD Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafiz Afandi, Halida Hanim (2017) Cutting tool jig design for brake disc skimming machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hafizah , Hamzah (2008) Data Library In Manufacturing (Cutting Tool) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizah , Ka'ab (2010) Development Of Intelligent Traffic Light Control Using Fuzzy Logic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizuddin, Zainul (2015) Development Of A User-Friendly Shuttlecock Collector Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haidzer Isa , A Rahman (2009) Analysis The Contribution And Effect Of Coolant To Straightness In Cylindrical Grinding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairi Azdy, Aezman @ Azman (2005) Mobile Robot Simulation And Controller Design With Matlab/Simulink. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairol Farisah, Jaafar (2008) Engine RPM Based Sensing Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairudin, Abdullah Azam (2022) Design and development of a testing rig for position localization using robot operating system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hairudin, Khairul Ikhwan (2018) Home Water Monitoring System Using Android Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hairul Anuar , Mohd Yusof (2007) Conceptual And Mechanical Design Of Master Slave (Parent - Child) Robot For Painting Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haizri, Hassim (2007) Smart Aquarium (Automatic Water Changer). Project Report. UTeM, Melaka. (Submitted)

Halim, Nabilah (2016) Design of fuzzy-PID controller for tracking performance of machine tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Halim, Nuqman Hakim (2019) Development Of Smart Mushroom House Temperature Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Nurhafizah (2017) A Study Of Fabrication Costs Of Testing Rig For River Trash Collector System With The Application Of Solid Thinking Inspire. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamdan, Zulmajid (2008) Modeling And Design Embedded Controller For A Condenser System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamdan, Hakimi Ezany (2019) Smart Control Water Quality Using IoT In Aquarium. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamdan, Syazira (2021) Evaluation of isolators to reduce vibrational effect for small scale thermoacoustic system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamdan , yahayudin (2011) Effect Of Cutting Parameter On Thin Wall Machining Accuracy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamdani, Muhammad Faris (2016) Develop Fuzzy Logic Controller For Prosthetic Hand. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Hamedan, Norsyazura Aiza (2017) Investigation Of The Capability Of Local Palm Oil Infused With Nanoparticle As A New Additive For Lube Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamid, Ahmad Sabri (2018) Development Of Smart Solar Tracking System With Blynk And Thingspeak. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamid, Fatin Aini (2017) An investigation of milling process with inclusion of nanoparticles as a coolant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamizan, Muhammad Aiman Danial (2021) A study on characteristics of indoor solar simulator using halogen lamp. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamizan Afandi, Rosadi (2015) Effect Of Excessive Electricity To The Thermal Conductivity Of An Automotive Electrical Supply Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Sakidin and Tay, Choo Chuan and Farhan, Hanaffi and Aziah, Khamis (2011) Micro-Controller Based Single Phase Power Supply Of Solar Battery Charger For Gazebo Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Ahmad Sarudin (2016) Loose Col-Pick Equipment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanif, Asha'ri (2013) Design And Machining Of Aerospace Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanif, Haziq Haiqal (2019) Improvement of vehicular heatstroke sensor system for children. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hartini, Saad (2006) Study On Types Of Sensor Used In Obstacle Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harun, Mohamad Haniff and Hj Azlan, Umar Al-Amani and Mohd Aras, Mohd Shahrieel and Mohd Annuar, Khalil Azha and Omar, Noor Irinah and Mohd Ab Halim, Mohd Firdaus (2018) A Novel Technique Of 3D Robot Vision System Through 2D Shape Based Matching Approach For Gluing Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Hasan, Muhammad Fikri (2019) Development Of Vision-Based Luggage Bag Following System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasanar Kunju, Muhammad Muzzammil (2018) Development Of Egg Incubator With Fuzzy Logic Controller By Using Microcontroller. Project Report. UTeM, Melaka. (Submitted)

Hashim, Umira Syafika (2016) Effect of chilled air coolant on surface roughness and tool wear when machining 2205 duplex stainless steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasil Adha, Haslan (2008) Evaluation Performance Of Louvered-Fin Compact Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haslina, Zakaria (2011) Temperature Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasminda, Hassan (2009) Vacuum Packer For Small And Medium Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasmiza, Muhammad Hasim (2006) Insect Inspired Six-Legged Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasnah, Haron (2005) Training Module For Motors For Mechatronic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasnol Yusri, Hasriq Ikmal (2022) Drilling of titanium alloy by using hybrid nanofluid in minimum quantity lubricant (MQL). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassan, Farah Ilyani (2019) Game For Ankle Rehabilitation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassan, Muhammad Shahirman (2017) Investigation On The Performance Mild Steel Impact Test Vibrational Analysis Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Nur Hayati (2017) Performance improvement of split savonius rotor by CFD. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassan, Rabiatul Nurelissa (2018) Application Of Simulated Kalman Filter Algorithm In Tuning PID Controller’s Parameters For Coupled Tank System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassanudin, Jihad Salihin (2016) Development Of Automated River Trash Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassin, Syahrunizzam (2015) Design and development of low cost and portable pico hydro turbine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Haw, Andy Han Shen (2024) Design & improvement (trash guide to conveyor) of trash collector system (deploy on Melaka river cruise boat) conveyor type mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hayadi, Mustafa (2009) Development Of Self Siagnosis (SMART) Plant Using Sorting Plant System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazali, Muhamad Shahrin (2015) Parametric Design And Analysis Of Automotive Suspension Coil Spring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazam Nor, Isma Dienny Hakim (2024) Analysis and modeling of the effects of process parameters on specific cutting energy in robotic welding machine MIG. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hazman, Md Yusop@Yusof (2008) Design And Development Of Motorized Cold Air Intake System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazrul Fazrizal , Hilman (2010) Intelligent SpyCam With Robotic Arm (ISRA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazwan Rodzi , Ahmad Sapuan (2007) Automated Storage Retrieval System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hee, Kar Cheng (2018) Design And Analysis Of Passive Hip Exoskeleton. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hee, Kee Ming (2015) Analysis Real Time Control Of Behavior Robot In Assiting Human In Cleaning Household. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Heng, Aik Yuen (2018) Development Of Sun Tracking Solar Panel With Self-Cleaning System Using Arduino Uno. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Heng, Benny Ek Ming (2019) Drilling Of Titanium Alloy Using Hybrid Nanofluid Coolant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Heng, Wei Zuan (2019) Multi Objectives Performance Optimisation Of Ultrasonic Assisted Drilling Parameter For Gorilla Glass: Parameters Investigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hew, Wei Ren (2021) CFD Study Of Flow Field Around Turbine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hidayat, Muhammad Yusuf (2019) Tribological performance of expanded graphite as oil lubricating additive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hilton, Smith Judan (2007) An Alternative Technique To Map Noise Exposure And Prediction Of Noise Levels In Industri Compliance To Noise Exposure Regulations 1989. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hisamudin, Mohamad Hasif (2019) Development Of Wire Stripping Machine For Domestic Wiring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hj Mortadha, Noor Mirza Syamimi (2017) Design, Analysis And Development Of Tennis Ball Collector Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ho, Bee Kim (2012) Effect Of Filter Unit Back Pressure To The Water Hydraulic System Pump Performance - 24 Pages. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Carl Choon (2015) Development Of Remotely-Controlled Home Monitoring Mobile Robot With Camera For Human Aids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Mun Bock (2020) Solar irradiance forecasting using global forecast system (GFS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ho, Su Jen (2019) Feasibility Study Of Remotely Monitored And Controlled Soil Moisture Based Irrigation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Yu Xian (2018) Design And Development Of Hand Gesture Control Drone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho , Fu Yeap (2008) Robot Worm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hod Salleh , Amran (2009) Autonomous Display Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hoo , Lien Tien (2007) Design On CIM Workstation System - LCD Monitor Back Cover Assembly Station. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hu, Zhen Han (2016) The Development Of Data Acquisition System Using Arduino And MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hulamri, Omar (2015) Development Of Domestic Renewable Energy Using Windbelt Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Humoc, Kennedy Bradley (2018) Implementation Of Kap In Technology Transfer And Commercialization. Project Report. UTeM, Melaka. (Submitted)

Husain, Syahroni (2021) Design And Simulation Of Cam Operated Iris Mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Husin, Hanaz (2018) Investigation on CNC turning parameters by using a vortex tube cooling system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Husin, Muhammad Aidilfitri (2017) Development Of Emergency Tyre Changing Tool Kit With Using Harvested Of Waste Exhaust Gas As Secondary Power Source. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husnul Hafiz, Ismail (2012) Merekabentuk Alatan Bagi Penyediaan Makanan Kucing Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husshini, Nur Husnina Najeah (2019) Grinding Of Mild Steel With Inclusion Of Quarry Dust Microparticles In The Coolant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussin, Hazwan (2020) Modelling and simulation of lane keeping control system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hussin, Muhammad Khairullah (2019) A Potential Study Of Wind Turbine Generator For Motorways Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Huzaifa, Musa (2010) Light Guided Path Tracker Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hwang, Tan King (2010) Surface Integrity Analysis In CNC Milling of 6061-T6 Aluminum Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hyreil Anuar, Kasdirin and Alias, Khamis and Muhammad Herman, Jamaluddin and Hairol Nizam, Mohd Shah (2009) Design and Development of a Compact Flying Robot Using Intelligent Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hyreil Anuar, Kasdirin and Syahrul Hisham, Mohamed (2009) Development Of An Intelligent Multi-Detect Surface Cleaner For Home Vacuum Appliances Using Hybrid Power Source. Project Report. UTeM, Melaka. Malaysia. (Submitted)

I

Ibrahim, Ahmad Amirul Amin (2019) Smart Visually Impaired Aid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim, Izzat Najmi (2021) Reliability study of cone laying and picking machine during field test. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Siti Azillah (2018) Parameter Optimization Of Surface Roughness For AISI 1018 For Low Carbon Steel In Wet Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim , Mazree (2009) Intelligent automatic car park system. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Ibtisam, A. Hamid (2015) Design And Implementation Of Intelligent Home And Electrical Appliances Control Using Android And Wifi Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Saaran (2009) Design And Fabrication Of A Checking Fixture For A Press Part Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idzeham, Izaidi Zafril (2019) Development Of Wind Turbine For Charging Battery Using Waste Energy From Air Conditioner Compressor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Igai, Peter Renang (2018) Mechanical Coffee Machine (Traveler’s Portable Coffee Machine). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ikhwan Hakim, Mat Idera (2012) Pembuka Nat Roda Kenderaan Daya Kilas Rendah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ilyas, Hafizol Haqie (2019) Waterjet anti-sink product filter for tiny part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Imi-Yanti , Yusoff (2006) The Suitability Of Wind Generated Power For Home Power Generation In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran Ariff , Mohamed (2010) GL System (Garbage Listing System). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irwin, Bilun (2009) Temperature Control Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Muhamad Saufi (2024) An analysis of road light intensity on single lane road with lamp pole on kerb side edge. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ishak, Nadiah (2017) Analysis Of The Influence Factors In Modelling The Energy Use In Factory 1,FTK Using Stepwise Multiple Regression. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Ismail, Fitri Hakim (2018) Development Of Fire System Preventer By Using Arduino As Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Intan Zuratikah (2024) Development of carbon nanotube-based nanoelectronic biosensors for glucose detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Mohammad (2014) Palm Oil Automated Grading System, AGS (Data Acquisition Unit). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Mohd Khairuddin (2010) Gyroscope Implementation On Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Mohd Saiful Ikhwan (2023) Structural improvement of river trash collector system (RTCS) for conveyor type mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Muhammad Azizi (2018) Development Of Automatic Poultry System (Quails) Using Arduino Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Muhammad Taufik (2018) Friction And Wear Characteristics Of ATF Oil With Nano Additive On Local Palm Oil For Automotive Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Nur Eynani (2019) Development Of Smart Leaking Detection System For Gas Cylinder. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail , Rashid (2011) Design Improvement Of Solar Grass Cutter Using DFMA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail , Yaakob (2007) Pemacu Motor Arus Terus Untuk Beban Minimum 5kg. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ispar, Izaan Afif (2018) Development Of Shuttlecock Launcher With Dual Mode Trajectory System For Badminton Training Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izni Hidayah, Mohamed Asri (2013) A Study Of Car’s Profile Design Using Boxfish’s Aerodynamic Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzat, Akmal Shariff (2014) Hexapod Controller Using Microprocessor Core In FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Jaafar, Mohammad Zarul Amir (2017) Development Water Billing System By Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jacob, Lisa Matius (2016) Development Of Vacuum Clamping For Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jai Kanth, Rajalingam (2005) Potential Of Inducing Natural Ventilation For Low Rised House Under Tropical Climate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jainudin, Mohd Irwan (2014) Process optimization for die manufacture : EDM die sinking. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jalil, Muhamad Suhaimi (2017) Development Of Portable Magnetic Clamping. Project Report. UTeM, Melaka. (Submitted)

Jamal Hussein, Jaavith Nazeem (2017) Remote-controlled electro-pneumatic actuator for remote response unit. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamal Mohamed, Muhammad Izzat (2018) Fabrication Of Bottom Modular Nozzle For Abrasive Waterjet Machine By Using High Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamal Zabidi, Puteri Amirah (2018) The Characterization Of Fuel Injector System For Automotive Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamallulil, Arina Dayana (2019) Tribological properties of palm oil mixed with hexagonal boron nitride (hBN) nanoparticles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamaludin, Zamberi and Jafar, Fairul Azni and Bani Hashim, Ahmad Yusairi and Rafan, Nur Aidawaty and Halim, Mohd Faizal and Md Ghazaly, Mariam and Abd Rahman, Md Nizam (2019) A Novel Extension Of Generalize Maxwell Slip Friction Model In Combination With Super-Twisting Sliding Mode Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamarudin, Nur Aina Ayuni (2018) Development Of Level Monitoring For Milk Pumping Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamiatul Adawiah , Ab. Sidek (2013) Heat transfer characteristics of a heat exchanger. Project Report. UTeM, Melaka. (Submitted)

Jamil, Ab Hamid (2015) Autonomous Robot For Flatness Inspection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamri, Aisyah (2018) Quality improvement of AI machining under CNC automated coolant supply. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamri , Mohd Saifuzam (2007) Robot Kawalan Jauh Pelbagai Frekuensi "Multi Frequency RC Robot'. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Janethy, Jahnes (2018) Design Of Multifunction Welding Jig For Butt, Lapp And T-Joint Using CATIA Software. Project Report. UTeM, Melaka. (Submitted)

Janisa , Aldean (2013) Total Design Of A Portable Automation Training Kit. Project Report. UTeM, Melaka. (Submitted)

Jannatunnaim , Harun (2008) Design And Modeling Of Multiple Tank Control For Fluid Circulation System Using PI,PD & PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jaripah, Adzhar (2014) Wireless Remote Control Utilizing XBee For Mobile Robot Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jaya Kumar, Yogan and Goh, Ong Sing and Muda , Azah Kamilah and Choo, Yun Huoy and Mohamad Jaya, Abdul Syukor and Ahmad Kamil, Muhd. Azhari (2018) Enhanced Sentence Extraction Through Neuro-Fuzzy Technique For Text Document Summarization. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jayasundar, Jayananthinii (2018) Development Of Smart Dustbin By Using Apps. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jeevintharan, Sivasankaran (2010) Design Of Experiment (DOE) Based Response Prediction In Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jefri, Qkhuratu'aina Aishah (2018) Development Of Motorized Cake Decorator Using Arduino System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jhonathan , Mark Danker (2006) Micromouse : An Autonomous Maze Solving Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jim, Kai Yiat (2014) Design, construction and analysis of biped robot for walking motion. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jimmy, Danny Ding (2019) An investigation on torso model for monitoring compensatory movement of stroke patients during cross-body reaching. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jimmy, Mizi Tommy (2023) The development of IoT-based shiitake mushroom smart farming system using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Joel, Ting Tiew Hwong (2009) Smart Monitoring Lighting Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johan, Muhammad Azfar (2023) Development of IoT based smart compost tea brewer for sustainable agriculture using arduino microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Johari, Ahmad Fairuz (2018) Investigation Of Kinematic Model For Khepera III Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johari, Nur Iman (2018) Smart Automatic Intelligent Trolley. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Joseph Rangga , Lium (2013) Design Improvements On Small Scale Production System. Project Report. UTeM, Melaka. (Submitted)

Josphene, J Endam (2005) Three-Phase 115-203V, 0.5HP Variable Speed Motor Drives Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jufarina, Jolkipli (2008) Sudoku Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jufarina , Jolkipli (2008) Sudoku Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juliana , Mohd Salleh (2012) Robot Simulation For Human Behaviour (In Team Of Attitude And Discipline). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Junaini , Abdull Kadir (2007) Mekanisma Dan Kawalan Menyeberang Bagi Roboclimb. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Junit, Nurul Huda (2018) Development Of Interactive Propelling Workbench For Disabled People. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jurina, Buniran (2010) Automatic Juice Mixer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Justin, Looh (2009) Microcontroller Board For Robot Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kamal , Muhammad Raini (2010) Study On Waste Wood As An Alternative Conservation Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal Syahidi, Kamaruddin (2009) Development Of Visualization System For Material Handling System Using Wonderware Intouch Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamaleshvaran , Balakrishnan (2008) Design Of Biped Robot Model Controller. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Kamarosshalina , Noh (2005) Integrating Spreadsheet Templates And Data Analysis Into Industrial Hydraulic Instruction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamaruddin, Luqman Naim (2019) Solar Powered Smartphone Charging Station. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruddin, Muhammad Syahzani (2017) Determination of stalling region for specific turbine blade's profile. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruddin, Nasrul Azim (2022) Investigation of power consumption for solar powered garbage collector cleaning tool on the beach using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarudin, Muhammad Nizam and Mohd Aras, Mohd Shahrieel and Sulaiman, Marizan and Chong, Shin Horng and Md. Rozali, Sahazati and Syed Salim, Syed Najib and Jaafar, Hazriq Izzuan (2018) A New Robust Adaptive Algorithm For Asymptotic Tracking Of Two-Mass Wind Turbine System With Lumped Rotor Stiffness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarudzaman, Nurkhuratul Aini (2017) Development of PID-PLC based control strategy for winder system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarul Arifin, Khushairi (2008) Rhino Robot Following Light Controlled By PC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Iszuwandi , Subri (2007) Merekabentuk Prototaip Dan Membangunkan Lampu Isyarat Pintar Menggunakan PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarulhelmy , Talib (2013) Optimization Of Mechanical Coupling In Electric Vehicle (ev). Project Report. UTeM, Melaka. (Submitted)

Kamarulzaman, Kamalia (2015) Design Of Slot-Less Linear Actuator For Food Processing Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamaruzaman, Aliff Farhan (2019) The design and development of pipeline inspection robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruzaman, Noreen Aqilla (2022) Investigation on tool life and wear progression of carbide tool in turning nimonic C-263 under multi-conditions. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Kamaruzaman, Mohd Farhaan (2015) Development of flat bar gauge using total design approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kanavati, Sivan@Sivaguru (2005) Developement Of Automatic Water Pump Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kang , Wei Sheng (2013) Universal Remote Control For Home Appliance With Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kanzal, Sameh Mohsen Omer (2015) Design and development of lead-through programming method using low cost incremental encoder feedback. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kap Lork, Ng (2009) Real Time Clock System. Project Report. UTeM, Melaka. (Submitted)

Kartikesu, Vijayan (2013) The Design Of A Torque Feedback Controller Using PID Controller For An Upper Limb Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasdi, Den Roko (2019) Handroid - sign language translator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kaswady , Husman (2009) Analyze The Effect Of Depth Of Cut Towards Surface Roughness In Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kechik, Abdul Hadi (2018) Smart Car Temperature Using Arduino Uno, GSM And Solar Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Soek Fuan (2018) A Design Of Automated Surgical Illumination System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Keek, Joe Siang (2017) Development of system controller and voice-controlled mobile application to control an omni-wheeled mobile robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Kefli, Muhammad Hamdi (2024) Economic feasibility study of high-capacity boiler technology for palm oil industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kelvin, Theng Sern Lung (2012) A Study On 5 % And 10 % Bio-Blended Diesel Fuel Spray Deposition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kelvin Sembai, Mohd Shahmirzzy (2019) Feasibility study of HHO cell for 150cc motorcycle SI engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Keng, Wei Pin (2011) New Design For Hot Water Storage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kew, Mun Yew (2013) Development of Glove Controlled Prosthetic Hand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil, Azman (2009) A Feasibility Study On Phototherapy Unit Powered By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Anwar, Norliyana (2016) A Development Of Wind Turbine Generator Using Waste Energy For Domestic User. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Anwar , Sapeia (2007) Tracking Of Moving Robot By A Moving Robot Using Visual Information. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairrilazam, Lattyfa Husna (2024) Embedded PID controller for pneumatic lifting application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairuddin, Abdul Rahman (2019) Two degree of freedom (2DOF) motion control of upper limb robotic arm mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairuddin , Mahalil (2008) Design And Development Of Seating Or Escalator For Double Storey House. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairudin, Zulfadli (2014) Heat flow during cladding process of nickel based deposited material on cast iron substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairul Afikh, Roslan (2009) Pick And Place Robot (Robotic Arm). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Akmal, Abdul Rahman (2009) PC Based Controller For A New Aquarium System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Amri , Saleh (2008) Merekabentuk Pengawal Logik Fuzzy-Pi Bagi Sistem Tangki Berkembar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Amzar , Mohd Kassim (2013) Design and fabrication of thrower mechanism for tennis ball machine. Project Report. UTeM, Melaka. (Submitted)

Khairul Anuar, Muhamad Asyraaf (2017) The Addition Of MoDTP In ZnBuDP Induced Palm Oil Bio-Lubricant As Tribological Property Improver. Project Report. UTeM, Melaka. (Submitted)

Khairul Anuar , Juhari (2007) Control Of Robotic Arm Using Visual Basic And Pic Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Ariffin, Md Shariff (2011) Non-Intrusive Liquid Level Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Ashriq, Ashruddin (2008) Control Of An Inverted Pendulum : Comparison Between Bode Plot Techniques And Root Locus Technique When applied To Lead / Lag Compensator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Fadzli, Pathil (2011) Mobil Robot Following Obstacle Avoidance And Collision. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Fadzli, Pathil (2011) Mobile Robot Following Obstacle Avoidance And Collision. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Fithri , Abdul Rashid (2006) Investigation Of Conventional Milling Machining To The Surface Roughness Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Hadi, Misri (2008) Laminar Flow In Rectangular Water-Cooled Minichannel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Hafiz, Shafad (2014) Underwater vehicle buoyancy control (surface). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairul Hamedy, Nurul Khayrun Niesya (2023) Online fan blade monitoring using wireless instrumentation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairul Izzat , Mohamad Sahimi (2008) Design Switch Mode Power Supply By Using Boost Converter Topology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Nizam, Khalid (2008) Unit Kuasa Hidraulik Padat Boleh Ubah Kelajuan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Ridza, Ramli (2012) Mechatronic System Educational Kit For Undergraduate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulanuar, Zainuddin (2010) Programmable Arm Robot Manipulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulhisyam, Jamel (2007) Development Of Automated Height Meaurement System (Software Development). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairullah , Zulkepli (2007) Merekabentuk Sistem Pengawal Untuk Lampu Isyarat Menggunakan PLC & FLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairunnisa , Khadari (2008) Kinematic Analysis Of 6-Axis Comau Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalid, Mohd Syakirin (2016) Development Of Automotive Air Scoop Micro Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kharmizan , Japar (2007) Design Jigs And Fixture For Surface Grinding Long Part. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Khasim, Abdul Razak (2009) Smart Intelligent Parking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khoo, Mun Choon (2008) High Performance Laser Drilling on Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khoo, Hui Yee (2015) Development Of Controller For Wireless Robotics Hand In Hazardous Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khoo, Samson Hock Chye (2008) Design And Analysis Of Robot Gripper For 10 Kg Payload. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Hooi Khee (2013) Disturbance Observer-Based Motion Control Of Direct Drive Motors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor , Han Wei (2010) Design And Analysis Of Offshore Wind Power Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khosni, Muhammad Azri (2018) Development Of Low Cost Portable Lifter For Split Unit Installation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kindamas, Zackris (2016) Assessment Effect Of Commercial Oil Additives (COA) On Engine Lubricant For Four-Stroke Motorcycle Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Eng Soon (2005) Development Of Electronic Counter For Multi-Storey Car Park Controlled By PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Guan Chong (2019) Development Of Programmable Wall Switch Panel With IoT System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Koh, Jian Yang (2017) Experimental Evaluation Of Multifunctional Variable Refrigerant Flow (VRF) System In An Application Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Ho Kiet (2008) Design Of PEM Fuel Cell Powered Lawn Mower. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Ho Kiet (2008) Design Of Pem Fuel Cell Powered Lawn Mower. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Komaruddin, Muhamad Ramdan (2018) Design And Fabricate Mini Heat Exchanger For Water Cooling System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kong, Mun Fun (2005) Micro-Controller Implementation Of A Line Following Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kooh, Chu Aik (2017) Controller design of a two-wheeled self balancing mobile robot base on a simulation view point. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kooh, Fu Xing (2018) Design And Analysis Of Robotic Arm System For A Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kui , Chu Siong (2011) Conceptualizing Energy Saving Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kumaran, Lingges (2022) Optimization of machining parameter in drilliing carbon fiber reinforced plastic (CFRP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kumaran, Thanis (2018) Investigation On The Effect Of Machining Parameters In Edge Trimming Of Carbon Fibre Reinforced Plastic (CFRP) Meterial. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kunyahamu, Siti Nur Syazwani (2019) Design And Performance Evaluation Of An Off-Grid Solar System For Small Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kusnan, Nur Izzati (2017) Preliminary study on effect of temperature on hydrophobic coating on metal. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kwan, Chin Seng (2012) Optimization Of Machining Parameters In Wire EDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lahapi, Siti Nor Saharah (2023) Development of an IoT-based solar powered automated roof clothesline suspension using a microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lai, Wei Wein (2015) Motion simulation analysis of portable accumulator for domestic water system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lai, Wei Yi (2015) Multi-Position Clamping Vise For Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Laila , Ahmad (2007) Merekabentuk Pemegang Bekas Serbuk Untuk Mesin Tekan Berputar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lam, Chee Sheng (2018) Study On Temperature Distribution On Different Combination Of Liquid And Gases For Plasma Generation Using Ansys Fluent. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lam, Soon Teng (2008) Robust Gamelan Bonang Hammer Actuator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lasunu, Kasmiah (2017) Wear characteristics of SK11 in engine oil and nanoparticles-enhanced engine oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Latif, Mohamad Ammar Faiz (2015) The Effect Of Cutting Parameter To The Hole Diameter Accuracy Of AISI D2 Tool Steel In Dry Drilling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Latifah , Sulong (2007) Force / Torque Sensing Applied To Industrial Robotic Deburring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Latip, Muhammad Fadhilullah (2016) Development Of Solar Powered System For Irrigation In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Siau Lek (2011) Enhancement The Performance Of Lighting And Ventilation System In Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Chee Yong (2018) The Development Of Sound Tracking Features Algorithms For Robot Head Movement Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lau, Chung Ching (2019) Event analysis on conveyor sorter system with IoT gateway application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lau, Eng Xiang (2021) Anti-wear performance of palm-based oil mixed with green additive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lau, Ghee Siang (2018) Development of automatic home plant watering system using soil moisture sensing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lau, Why Chuong (2015) Leader Follower Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Law, Cheng Quan (2017) Investigation on path planning for autonomous mobile robots in partially observable environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Law, Kok Wah (2019) Design and development of cooperative controlled two robots for pipeline inspection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Jia Chang (2008) Simulation Of Cavitating Flow In Circulating Water Pumps In A Power Generation Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Mee Yee (2009) CC2430EM Application For Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yuk Choi and Ahadlin, Mohd Daud and Shamsul Anuar, Shamsudin (2007) Vibration Analysis Of Cavitation In A Centrifugal Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Dai Jin (2018) Synchronizing control of a twin axes table drive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, De Rong (2017) The Design And Development Of Temperature Controlled Oyster Mushroom Farmhouse Using PID Control Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Elsa Sook Theng (2021) Modelling of rotor dynamics with ansys. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Kian Loong (2015) Implementation Of PID Controller Using PSO And Harmony Search Algorithm For DC Motor Speed Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kim Long (2024) Mechanical design and development of a differential drive mobile robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Ling Xuan (2024) Design of PID-based pneumatic position control in lifting system application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Mun Hoe (2015) Design, Construction And Analysis Of Ceiling Fan Cleaning Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Pei Kee (2017) Environment mapping using multiple robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Ricardo Eik Wen (2019) Development of Arduino-based hydroponic system with user input function. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Sek Enn (2015) Control Mechanism Of Linear Electric Actuator For 3D Image Processing Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Shu Fang (2019) Path planning for maximizing the point of view of object using robotic arm with vision. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Sin Hui (2018) Development Of Add-On Smart Home System Using Internet Of Things (IoT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Thiam Sui (2015) Robotic System Design Control By Using Armband Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Wai Kiong (2009) Programmable Pick And Place Robot Arm For AGV System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Wee Teck (2019) Study of flow inside thermoacoustic system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Wei Keat (2019) A new strategy of water temperature control based on temperature rate monitoring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Yong Seng (2015) Modeling on effect of drill geometry for bone drilling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Zi Hao (2015) Two-Wheeled Balancing Robot Controlled Using Android Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Zong Chen (2019) Mobile robot navigation system vision based through indoor corridors. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee , Chia Hau (2008) Conceptual Study, Design And Analysis Of Stirling Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Kyen Roon (2009) Intelligent Autonomous Vehicle For Mail Transportation (Mail Bots). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Dai Cong (2014) Design an intelligent controller for depth control of ROV using micro-box 2000/2000C. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee , Fabien Thean Weng (2008) Omni Directional Logistic Transportation Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Jun Wei (2014) Leap motion : controlled robotic arm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leo , Khee Jia (2011) Cutting Force Compensation Analysis Using PID Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Adrian Wai Chen (2019) Development of PID-type fuzzy logic controller with adaptive invasive weed algorithm to control of flexible arm system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Letchumanan Thevar, Maniam (2005) Expert Knowledge-Based Boiler Diagnosing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lew, De Kai (2023) Development of an automatic waste sorting machine using arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liew, Sheau Ping (2013) Implementation Of Network Communication For Utility Pole Maintenance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Toong Kean (2010) Optimization Of Machining Parameters In CNC Milling For Nylon 6. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Chin Chin (2017) Effect Of Hard And Soft Segment Ratio To Vibration Damping Properties Of Polyurethane. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Pay Jun and Mohd Razali, Muhamad (2009) Study Of The Surface Integrity Of The Machined Workpiece In The EDM Of SKD 11 Tool Steel. Project Report. UTeM. (Submitted)

Liew, Quek Shiung (2019) Design and construction of robot head system using speech recognition to express emotions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liew, Wai Yip (2015) Development Of Mobile Robot Using Rasberry Pi For Swarm Robotics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Zhe Xiong (2016) Design Improvement Of 1 TERAS Sabit With Finite Element Analysis (FEA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chee An (2013) Ironman Project - Design Of Electro-Mechanical Muscle For Elbow Exoskeleton Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Huey Kian (2005) Object Recognition For Pick And Place Tasks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Siew Lay (2008) Six -Legs Walking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Hui Teng (2019) Development Of Simultaneous Localization And Mapping (SLAM) Robot By Using Raspberry Pi. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Hui Yee (2017) Development Of An Automatic Can Crusher Using Programmable Logic Controller At FTK Canteen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Jie Xiang (2023) End-of-life solar panel recycling decisions for Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Jin Tzen (2016) Analysis and improvement of lubricant blending cycle-time inconsistency using QC tools. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Liyen (2016) Investigation of tool wear when machining AISI 1045 using uncoated carbide cutting tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Say Li (2015) Design and analysis of a mobile robot mechanism for maintenance works in manufacturing environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Shih Huey (2018) Flood Disaster Indicator Of Water Level Monitoring System Using Internet Of Things (IoT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Suzanne Shien Thung (2016) The application of TRIZ reduce speed loss in semiconductor manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Vun Haw (2018) Modelling of twin-axes table drive system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Yong Hock (2019) The Optimization Of Laser Machining Parameters For Hole Cutting Of Stainless Steel Using RSM Approaches. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Yun Ta (2018) Robot’s Facial Movements To Express Basic Human Emotion. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim , Boo Eik (2007) Two Wheeled Balancing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Chong Wei (2009) Optimization Of Machining Parameters In High Speed Milling Of Aluminum 6061. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Peir Jiunn (2007) Micromouse : An Autonomous Maze Solving Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Seng Keat (2008) Development Of Fuzzy Logic Speed Controller For DC Motor Applications Using Rabbit Microprocessor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Seng Tat (2007) The Design Of A Small Scale Automated Machine For Learning Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Pei Fern (2009) Portable Honey Orange Fruit Sorter (Prototype And Power Supply Design). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Wee Teck (2008) Design And Development Of An Embedded Controller For Robotic Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lina , Feng (2010) Inverted Pendulum Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Grace Kian Hwai (2018) Design And Analysis Of Passive Shoulder Exoskeleton. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Sing Yip (2015) Mobile Robot Navigation System Line Following Robot By Using PID Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Siong Ngiung (2018) Development of internet of things application for digital energy meter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ling , Chai Voon (2009) Design And Analysis On Durian Opener. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Gordon Teck Poh (2016) Framework for robotic work cell configuration. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liong , Kin Fei (2010) Intelligence Multipurpose Vacuum. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lipang Henry, Vannessa (2020) Effect Of Automated Coolant Supply System On CNC Turning Performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liyana Nur, Abdul Fadidz (2015) Mereka Bentuk Mekanisma Mesin Penghancur Sisa Makanan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Logan Raj, Lourdes Victor Raj (2012) Development Of Automatic Liquid Filling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Angeline Wan Jing (2017) Brain-Machine Interface Device For Amyotrophic Lateral Sclerosis (ALS) Disease Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loh, Mun Loong (2019) Design and verification of pick and place arm model by using Petri Net. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lok, Chee Cong (2017) Development of bilateral master-slave telerobotic arm manipulator system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lok, Wing Hong (2016) Development Of Autonomous Robot For Flatness Inspection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lok , Fung Kiew (2008) Modeling And Simulation Of An Impeller In Circulating Water Pump In A Power Generation Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loke, Kok Wei (2015) Robotic System Design Controlled By Using Hand-Gesture Motion Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loke, Weng Hong (2010) Vision-Based Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lokman, Abdullah and Mohd Hisham, Nordin and Shariman, Abdullah and Lee, Wai Kiong (2010) PC Based Control of XYZ Motion for Storage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lokman, Hussin (2005) Mengimplimentasi C++ Ke Atas Robot Mobil Fischertechnik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lokmanul Hakim, Amirul Aiman (2022) Development of AI based post stroke rehabilitation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Looi , Siew Chin (2015) Six Legged Robot Walking Gaits. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loong, Chee Han (2015) Design And Analysis Of Heat Pump Control System By Using Programmable Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Wai Tuck (2014) Design and development of turning motion trajectory for limb assisting device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Low, Winson Wei Haw (2024) Gray oyster mushroom automated system with IoT monitoring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Low , Kah Huey (2006) Quality Investigation Of Circular Laser Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low , Yean Yin (2009) Development Of Sensor And Automation System For A Fruit (Honey Oranges) Sorter Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Luah, Chii Hao (2017) Blade-Generator Structure Analysis And Topology Optimization Of Savonius Vertical Axis Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Luei , Hong Keat (2009) Surface Modification Of Low Carbon Steel In Laser Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Luqman Hakim, Kasmon (2010) Development Of Navigation System For Autonomous Mobile Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lydia , Abd Arif (2008) Numerical Simulation On Micro Channel Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lydiana, Sorupi (2007) Line Following Mobile Robot Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

M. Azhar, Ume Nur Ashikien (2016) Human Robot Interaction (HRI) for kindergarten children using humanoid robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mageswaran, Paramasiban (2006) Study And Theoretical Investigation Of Variable Geometry Turbo Charger (VGT) For Lower Emissions And Improved Characteristic And Efficiency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mah, Hoong Ming (2009) Line Following Automatic Robot Using Mecanum Wheel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadi, Muhammad Ammar (2019) Building Energy Performance Challenges & Potential. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadir , Lokeman (2008) Tunnel Inspection Robot II. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadir , Mohd Tazrin (2010) Solar Powered Water Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahamad, Khairul Izlan (2008) The Design Of Motorcycle Rim Adjusting Jig Using Dial Gauge. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahamed Rasdi, Mohamad Rafiq Farhan (2018) Development of modular automated storage and retrieval systems. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Mahanum, Mohd Zamberi (2005) Performance Of 2-Shaft Gas Turbine Using Liquid Petroleum Gas (LPG) As A Fuel Feeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahasan, Ahmad (2008) Merekabentuk Pengawal Suai Untuk Sistem Tangki Berkembar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahasan, Mat Ali (2008) Manual Control Robot For Pick And Place Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahat, Nur Atikah (2021) Design and analysis of innovative motorcycle holder phone charger. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahathevan , Ramasamy (2006) Conveyor Belt Motor Using Control Grafcet As Programming Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahmud, Norazilah (2017) Study of vortex tube cooling system on tool wear and surface roughness using conventional machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Maidan Al Hadri, Muhammad Albaihaqqi (2023) Performance of open-cell foam heat exchanger under various operating condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Maidin, Mohammad Noor Firdaus (2024) IoT-enabled energy consumption monitoring and analysis for domestic appliances. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Maidin, Nurul Ain and Alkahari, Mohd Rizal and Ab Rahman, Mohd Hidayat and Ramli, Faiz Redza and Dullah, Abd Rahman (2018) Manufacturability Analysis On Open Source 3D Printed Part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Maisarah, Abu Bakar Assari (2013) Eco Saver Mower (ESM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Majid, Nurliyana (2018) Design And Development Of Pipeline Inspection Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mamat, Hafizuddin (2016) Development Of Automated Assembly Trainer With HMI/SCADA System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Manikam, Karthik (2018) Design Of The Supply Generator From Solar Panel By Using Arduino Controller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mansor, Masrina (2017) Development Of Milk Dispenser Using Arduino Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mansor, Nuratiqa Natrah (2016) Detection Of Anomaly Object By Using Humanoid Robot. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Mariana , Arshad (2015) Improving the densification of tungsten carbide by liquid phase sintering. Project Report. UTeM. (Submitted)

Mariani , Mohamad (2009) Real Inverted Pendulum Control Using LQR Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marikon, Muhammad Redzuan (2017) The investigation of the position control finger for rehabilitation robot using 5DOF robotic arm manipulator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Marimuthu, Ravinath (2018) Comparative Study Of Different Line Following Techniques For Robot Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mariyam Jameelah, Bahari (2007) The Effects of Cutting Parameter on Workpiece Surface Layers in the Die Sinking Electrical Discharge Machine (EDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Martin, Aerun (2017) The integration of fuzzy logic system for obstacle avoidance behaviour of mobile robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Martini, Mohmad (2015) Comparative Tribological Investigation Of Bio-Lubricant Formulated From Cooking Palm Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maryahafida, Mamat (2010) Solar Light Positioniong Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maryam Haryati , Abdul Raman (2015) The use of paddy straw fiber as an additional damper to reduce vibration transmissibility from hand-held power tools. Project Report. UTeM. (Submitted)

Mas Ayu Irma, Muhamad (2009) Dynamic Characterization Of A Single-Link Flexible Manipulator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mashasliza , Ismail (2007) Rekabentuk Sistem Penghantaran Produk Nata De Coco. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mashitah, Osman (2009) Automatic Controlling Conveyor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mashitah, Ramli (2009) Wireless Floor Dryer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masiron, Nurafifah (2015) The Effect Of Different Cutting Tool Material To The Surface Finish Of D2 Tool Steel In Drilling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masita , Mohd Bari (2008) Parameter Study On Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maskana, Mamat (2012) Sistem Kawalan Adaptive PID Untuk Kenderaan Autonomi Berdasarkan Anggaran Gred Jalan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maslinda, Paharudin (2015) Intelligent Controller Design For A Nonlinear Quarter-Car Active Suspension With Electro-Hydraulic Actuator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mastor, Fatin Najwa (2016) Effect Of Inlet Velocity On Fluid Flow In T-Junction Pipe With Edge Fillet For Dividing Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mastura, Mutafa (2015) Investigation Of Hydraulic Piston Due To Contamination. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat, Lokman Hakim (2016) Improvement Of Tribological Properties Of Zinc Dialkyldithiophosphate (ZDDP) Induced Corn Oil Bio-Lubricant With The Addition Of Molybdenum Dialkyldithiophosphate (MoDTP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Abas, Nur Hafizah (2017) Frictional behavior of SK11 in engine oil and nanoparticles-enhanced engine oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Azman, Muhammad Syahrol Nizam (2020) Optimization of tribo-performance of 3D-printed ABS with internal structure formation for production of automotive bearing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Daud, Mohd Talmizi (2014) Performance of self-fabricated CNC machine when machining industrial product. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Daud, Muhammad Adam Aiman (2022) Study chair’s design optimization using design for manufacture and assembly method (DFMA). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mat Faizal, Omar (2007) Automatic Gate Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Hassan, Muhammad Syazwan (2018) The Impact Of Engine Performance On Naturally Aspirated : Case Study Ignition Setting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Nasir, Amar Saufi (2024) Power system controlled islanding equipped with Battery Energy Storage Systems (BESS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Sani, Nurul Najeehah (2022) Development of bio-lubricant from waste Musa Paradisiaca enhanced by crystalized structure of nanoparticles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Sarif, Amirul Syahiran Izman (2019) Output membership function tuning of fuzzy logic speed controller for induction motor drive application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Yamin, Ahmad Kamal (2018) AutoCAD 2017: Creating a Drawing Template. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) AutoCAD 2017: Setting Up the Drafting Tools. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) AutoCAD 2018: How to get a free 3-year education license. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2017) AutoCAD Certified Professional Practice Exam - Part 1. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2017) AutoCAD Certified Professional Practice Exam - Part 2. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2017) AutoCAD Certified Professional Practice Test - Part 1. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) Exercise 1: Creating a 2-D Geometry in AutoCAD2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) Exercise 2: Creating a 2-D Geometry in AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) Exercise 3: Creating a 2-D Geometry in AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) Exercise 4: Creating a 2-D Geometry in AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) Exercise 5: Creating a 3-D Solid Model in AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) Exercise 6: Creating a Revolved Feature in AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) Exercise 7: Creating a Complex Shape Object in AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2017) Exploring the AutoCAD Program Window. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2018) GET TO KNOW THE REQUIREMENTS OF YOUR DYNO CELL. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2017) Part Modelling in AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2017) Tutoria1 2: Parametric Modelling of a 2-D Geometry using AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2017) Tutorial 1 : Direct Modelling of a 2-D Geometry using AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2016) Tutorial 1: Finite Element Analysis of a Cruciform Braced Chassis Frame using ANSYS Workbench. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2016) Tutorial 1: Fluid Flow Through a Duct Bend using ANSYS Workbench. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2016) Tutorial 2: Fluid Flow Through an Automotive Catalyst Monolith using ANSYS Workbench. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Ahmad, Fauzi (2015) Self-Assessment Report 2015 for Bachelor of Mechanical Engineering (Automotive) with Honours. Documentation. Universiti Teknikal Malaysia Melaka. (Unpublished)

Mat Youb, Norsarizan (2008) Designing Helicopter Controller Using Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mau, Han Pink (2015) Design And Development Of Pole Climbing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maulud, Nuuril Fahmi (2015) Effect of drilling parameters on the surface integrity of aluminium alloy LM6 using response surface method (RSM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazalinda, Mazlan (2011) Automatic Pineapple Peeler Machine Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazareena, Mokhtaram (2008) The Study And The Design Of Mass Marsh Or Grass Puller Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazda, Nur Syahirah (2016) The effects of shaft misalignment at different speed on vibration and sound emission. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazidah, Bakhari (2015) Merekabentuk Dan Menganalisis Sebuah Pemanggang Barbeku Menggunakan Kuasa Solar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazidah, Mazri (2013) Effect Of Thickness On Mechanical Properties Of Plywood Honeycomb Core. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Ahmad Nizam (2015) Design Of An Intelligent Energy Saving Building Concept Using PID Approach For Indoor Gallery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhammad Ikhwan Haqiem (2020) The Prediction Of Multiple Polishing Parameters Optimization By Using MANFIS-PID. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazlan, Muhd Uzi Migzuan (2017) Development Of Shuttlecock Launcher With Dual Mode Trajectory System For Badminton Training Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Ali, Mohamad Fariq Azzad (2017) Improvement In Efficiency Of Water Floating Nano Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Amin Teng, Azlina (2015) Development Of Tele-Operated Animatronic Hand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Arif, Abdul Rahman Ashraf (2018) Smart Sorter Dustbin By Using Arduino Uno. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Aris, Muhammad Mahir Al Hafiz (2015) Development Of Waist Power Assistive Suit To Prevent Lower Back Pain. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Azriq Izwan, Md Yusop (2009) Gantry Crane System : Inverse Dynamic Analysis Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Fendy , Md Fazeli (2009) Attendance Free Parking Counter Using Microprocessor And Magnetic Sensor (hardware). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Hamsani, Muhamad Fairuz Rezza (2019) Community energy storage dispatch strategy for maximizing the techno-economic benefits. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Hasan , Muhammad Roshidi (2016) Computer Network Product Quality Inspection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Isa, Mohamed Hafiz and Mohamad, Norhidayah and Tee, Boon Tuan and Razak, Nurul Hanim and Rosman, Putri Shazlia (2018) Cleaner Production : Quantitative Analysis For Reduction Of Energy And Water Consumption In Manufacturing Industry Using Heat And Water Pinch Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Nayan, Nor Asima (2018) Temperature Control Device Design For Electric Kettle By Using Pid And Sliding Mode Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Nor Irwan Shah , Md Ab Rahim (2007) Design And Development Of Semi-Auto Point-To-Point Pneumatic Tube System For Manufacturing Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Radzi, Muhammad Syafiq (2018) Numerical investigation of nanofluid flow and heat transfer inside a microchannel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Ridzuan , Talib (2008) Design A Multi-Function Digital Thermometer. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Md Saiful Anuar, Mohd Nasirruddin (2008) Obstacle A Voidance With 4WD Rc Robot Using Ultrasonic And Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Salim, Md Yunos (2009) The Usage Of Solar Energy To Reduce The Warm Temperature In The Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Sallehan, Muhammad Syafi (2017) Comparison Of Different Organo Zinc Compound As Tribological Properties Improver In Palm Oil Based Bio-Lubricant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Sharin, Batrisyia Nur Saadah (2023) Development of mammals tank feeders of pallet type diet for eight days. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Md Suhaimi, Muhammad Allif Izzat (2016) Automatic Watering The Plant Without Human Interference. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Yusop, Azdiana (2008) Dynamic-inversion-based control for vibration-free positioning of a gantry crane system. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Md Zawi, Norhidayatul Hazwani (2018) Design Of Electronic Household Onion Peeler. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md. Dahad, Nurul Syahida (2009) Roboclean. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Haikal, Md. Kamsor (2008) Mengkaji Prestasi Enjin Kecil Menggunakan Bahan Api LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Jani, Khairul Bariyah (2016) Development Of Smart Assist Device For Visual Impaired Person. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Medon, Nurul Izzati (2017) Performance comparison on PID and MIT rule approach for electro-pneumatic position system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Megat Samsudin, Megat Muhamad Shafiq (2016) Street Lighting System Using Solar Powered Led Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mei Hui, Lim (2019) Development Of Object Following Robot Using Raspberry Pi. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Melissa Sara Echa, Gabriel (2015) Robot Controlled Using DTMF Technique For Chemical Transportation Purposes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Meor Affendi, Nurul Aizzati (2019) Trajectory planning of hip powered orthotic device using cubic polynomial equation with via point. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Meor Ahmad, Meor Akram (2017) Sleep Sensing And Alerting System For Drivers. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mhd Nazeri, Amir Najmi Bin (2024) Implementation of preventive maintenance on milling machine at UTeM machining technology laboratory. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Micheal, Marcel (2024) Implementation of preventive maintenance programme on band saw machine in machining technology laboratory. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mior Kamalrul , Mior Abd Aziz (2015) Development of laboratory pic microcontroller trainer. Project Report. UTeM. (Submitted)

Mior ShahrIl, Sulaiman (2010) Membangunkan Dandang Tiub Air Menggunakan Bahan Bakar Pepejal Buangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mirfaizal , Chuchu (2007) Fault Diagnosis And Flow Induced Vibration In Submerged Vertical Pumps In A Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Misbahul Munir, Nurul Qamariyah (2018) Design of PID controller with integration of artificial intelligence for machine tools application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Misdar, Nur Adila (2015) Development of solar powered speed warning system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Miswan, Mifzal Syahiran (2019) Development Of Safe Airport Trolley. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Moganaganes , Sundaram Murgan (2009) To Investigate Effect On Surface Roughness For The Stainless Steel 304 Materials In CNC Lathe Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohad Khalil, Mohad Khazin (2015) Root Cause Failure Investigation Of Boiler Super-Heater Tube In Coal Power Plant At Kapar, Klang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Aliatul Syafiqah Nabilah (2018) Improving Waste Cooking Oil Lubricity Properties With Enhancement Of Nanoparticle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Mohamad, Ibrahim (2018) Development of modular hull of a submersible vehicle for engineering services. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Minhat (2013) Development Of A STEP-NC Controller System Framework And Implementation In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Mohamad Afif (2017) Development Of Public Transportation (Bus) Notification Using PIC Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Adam, Mohamad Rajuni (2009) Light Weight Manual Lifting Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Adha, Mohd Pekeh (2015) Analisis Pemindahan Haba Bagi Penukar Haba Dalam Aliran Yang Berayun. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Afiq, Shawaldin (2013) Investigate Surface Integrity When Machining FC300 Cast Iron Using Uncoated Carbide Ball End Mill - Study Of Subsurface Micrograph. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ahyat, Amirul Nur Rashid (2008) Design A Line Following Mobile Robot With Distance Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Aidil , Abdul Jalal (2008) Design And Development Of Line Tracking Robot With Obstacle Avoidance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Amirul, Ariffin (2015) Analysis And Development Of A Control Strategy For Robotic Wheelchair Controlled Using Single Channel Eeg Headset. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Arif, Mohamad Rahim (2015) Intelligent Sumo Robot (SUMOBOT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ariff , Mohd Arshad (2007) Study On DC Motor Control System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Ariff Haikal, Badrul Hisham (2015) The Effect Of Cutting Parameter To The Hole Diameter Accuracy Of Aisi D2 Tool Steel In Drilling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Aris Iqqhwan , Alizan (2015) PID Tuning Using Bat Algorithm For Coupled Tank Liquid Level System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azhri, Zulkifli (2006) A Pc Control System For Controlling Blinds On Windows. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azli, Che Azhar (2008) Merekabentuk Dan Membangunkan Sistem Gerudi Berpandukan Koordinat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azmi, Helmi Affendi (2014) Modelling effect of cutter geometrical feature for shoulder milling of thin deflecting wall. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Azril , Mohamad Noor (2009) Development Of Robot Movement For Polishing Process Using Workspace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ezwan, Yusoff (2012) A Small Scale Automatic Water System For Boiler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fadli, Ismail (2009) Wireless Gas Leaking Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fadzly, Mohamad Arif Fauzan (2018) To Develop Automatic Wire Cutter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faizan, Paiman (2007) Membangunkan Prototaip Mesin Penjualan Automatik Dengan Menggunakan PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faizul , Hussain (2007) Fluid Delivery Subsystem For Oryza Sativa Pesticide Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fakhri, Megat Zhafrann Amyr (2024) Performance analysis of specific yield for solar PV based on statistical technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Fakri, Juhari (2014) Design and development of exoskeleton bionic hand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Farik, Siti Farizatul Akma (2015) Research On Concept Idea Of Semperit Dahlia Machine Design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Fauzi, Darmo (2014) Design and development of wireless robotic hand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Fazdhli, Fawzan Hanafi (2023) Improvement design and testing of a rapid advance future (RAF) prosthetic lightweight leg. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Fikree , Alias (2008) Design And Development Of Gui For A Remotely Controlled Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fikri, Nasir (2013) Development Of Slicing Machine Using Integrated Approach (Total Design). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hadzir, Mohamad Alif (2018) Environmental Impact Assessment Of Non-Traditional Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hafizee , Yaacob (2007) Investigation Of Effectiveness And Cleanliness Of Automated Blow Fill Seal Process In Pharmaceutical Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hanafy , Saleh (2009) PC Based Electrical Drive Switching Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hanapi, Nurul Narina (2019) Stair climbing motion control for portable mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Hanif , Othman (2006) Solenoids Direction Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Harith, Abdul Ghani (2009) The Improvement Of Existing Truing Jig Stand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Izani, Mohamad Azmi (2015) The Determination Of Suitability Condition For Cooling The Lightning Detection System Using Peltier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Izwan, Ishak (2010) Development Of Interactive Machining Process Design And Machining Time Calculation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Jamil, A Samad (2012) Wind Energy Charger For Rider (WECFR). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Khairon, Nur Nabilah (2017) Design And Development Of Mobile And Detachable Counter Balance Arm Sling For Neurological Patient With Hemiparesis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Khairul, Mohd Kamel (2015) Design And Development Of A Wireless Controller Module (Smart Home Networking With Webcam CCTV Surveillance). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Mahadi , Zahrin (2010) Static Analysis Of Moving Coil Linear DC Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Musa , Suntong (2008) Microcontroller- Based Mechanically Scanned Led Flash Display. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Nabil Fikri , Abdul Rahim (2008) Carbon Dioxide Laser Etch Drilling Of Mild Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nazrin , Jamar (2015) Experimental analysis and study of spark plug in 4-stroke gasoline engine. Project Report. UTeM. (Submitted)

Mohamad Noor, Mohamad Shah Nizam (2016) Tribology Studies Of Bio-Lubricant On Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Noor, Mohamad Syafiq (2018) A Study On The Conceptual Design Of Rubbish Collector Boat For Sungai Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Noor Adami, Fazreena (2014) Improvement of cutter geometry to enhance machining performance for trimming CFRP composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Nor, Dalila Basirah (2017) Prediction On The Reliability Of Glove Dipping Machine Using Weibull Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nor, Mohamad Luqman (2019) Design Of Self-Tuned PID Controller For Linear Direct Drive System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Norani, Norlina (2021) Sustainable precision agriculture - automated blending of macro-micro nutrients. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Nur Adli, Mokhtar (2010) Feasibility Study Of Generating Power From Renewable Energy For Irrigation Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Rahadi, Mohamad Saiful Azhar (2019) Design and development of a 6x6 oil palm fruit bunch utility transporter lifter system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Razif , Baharudin (2007) Analysis The Performance Evaluation Between Oil Based Coolant And Environmentally Based Coolant On Cutting Surface In Turning Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Rezduan, Mohd Jan (2011) Design And Development Of Embedded Control System For Controlling A DC Motor Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Rossaifuddin, Mohamad (2015) Development Of Rope Climbing Robot Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Rozi, Mohamad Najmi (2016) Study Of Coefficient Of Friction Of Pure Bio-Lubricants Based On Banana Peel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Sabri, Mohamad Amin (2019) Development Of Water PH Stabilizer For Smart Garden. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Safuwan, Romli (2014) Technical viability of parabolic dish concentrating solar power in Malaysia environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Sahran , Kamilan (2008) Design A Multi-Detect Surface Algorithm For Home Vacuum Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Saiful Azhar, Harun (2005) Effect Of Tool Geometry, Material Hardness And Cutting Parameters On The Cutting Force Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Sattar, Mohamad Rusydi Azim (2018) Development of mould to fabricate alumina cutting tool by using 3D printer technology with ABS and PLA material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Saufe, Muhammad Aufa (2022) Design of sliding mode controller for robust tracking of pneumatic systems. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Saufi, Aina Nadia (2020) Tools Performance Of 22mnb5 Boron Steel Cutting Tools During Turning Machining With Aluminium Alloy (AA 6061). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Saufi, Subari (2015) Performance Of CVD Coated Carbide Tool By Optimizing Machining Parameters During Turning Titanium Alloy Ti-6Al-4V ELI In Flooded Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shaferudin, Atiqah (2017) Assessment Of Renewable Energy Effect Of Grid Transient Stability In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Shahrul Naim, Saidin (2019) Development Of Resistive Sintering Furnace For Sintering Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Shaiful Faiz, Abd Rahim (2015) Smart Mini Automatic Vacuum Cleaner Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shameel , Abdullah (2007) Merekabentuk Sistem Panel Solar Bergerak. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohamad Solehin, Mohamed Sunar (2014) Hexapod Motor Controller Using FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Wahid, Arifudin (2019) Development Of Smart Classroom Using NodeMCU ESP8266. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Wahyee , Hamidon (2007) Design And Fabricate A High Torque Magneto-Reological Fluid Clutch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zafarid , Jaridi (2007) Kajian Tentang Kesan Perubahan Beban Ke Atas Enjin Terhadap Nisbah Udara-Bahan Api Dan Prestasi Enjin Pembakaran Dalam. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohamad Zaharudin, Muhammad Raiz (2024) Design and development of cell to cell conveyor system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Zaharudin , Sariman (2013) Position Tracking Of Slider Crank Mechanism By Using PID Controller. Project Report. UTeM, Melaka. (Submitted)

Mohamad Zahir, Wafa Izzati (2023) Reproduction of batik pattern using reverse engineering for heritage preservation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Zin, Mohamad Danial Aiman (2019) The characteristics of thermal energy and momentum transfer across solid-liquid (S-L) interfaces between Face Centered Cubic (FCC) latice and simple liquid. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Zufri, Abd Rahman (2014) Omni Directional Control Algorithm For Mecanum Wheel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed, Amir Syahir (2017) Development Of Smart Baby Cradle By Using PIC16PF877A Controller. Project Report. UTeM, Melaka. (Submitted)

Mohamed Abdul Ghani, Nik Muhammad Hazwan (2017) Tribological properties investigation for nanoparticle enhanced natural oil-based lubricant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Aliasrudin, Mohamad Ikhwan (2021) Design of lifting frame for bundle puller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Aripin, Muhammad Nawi (2017) Fabrication Of Suspension System For The Palm Oil Plantation Agriculture Smart Mover Through Experimental And Numerical Prediction. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Ayub Khan, Muhamad Haziq (2017) Response Surface Model (RSM) of CO₂ laser cutting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Azmi, Said and Marizan, Sulaiman and Muhammad Herman , Jamaluddin (2007) Design Of Vision Guided Manipulator For Optimal Dynamic Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Azraai , Ahmad Puad (2008) Linear Motion Based Sensing Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Bukhary, Amsyar Arif (2018) Development Of Empty Oil Palm Fruit Bunches (EFB) Segregation Using Machine Learning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Faiz, Mohamed Musa (2015) Fire Alarm With Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Imran, Mohamed Taufik (2015) Multivariable PID Tuning Using Cuckoo Search For Activated Sludge Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Ishack, Mohamad Nidhzam Faris (2017) Real-Time Human Machine Interaction For Robotic Arm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Khair Johari, Mohamad Azahari (2019) Reverse Vending Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Nasir, Mohamad Fahmi (2019) Design And Simulation Of An Electro Pneumatic System For Food Industry (Putu Mayam). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Nasrim, Muhammad Nasrullah (2018) To Investigate The Friction And Wear Of Transmission Oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Naufal , Omar (2007) Pick And Place Robotic Arm Controlled By Computer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Ruhaizzat , Mohamed Din (2015) Conceptual design of air engine system for air powered motorcycle. Project Report. UTeM. (Submitted)

Mohamed Sobhi , Mohd Noh (2006) The Development Of A Hydraulic Gear Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Talmizi, Siti Nursyafiqah Mohamed Talmizi. (2020) Investigation On Designed Jig Fop Nozzle Positioning Of Automated Coolant Supply System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad, Firdaus Ahmad (2011) Development Of All-Terrain Robot Using Legged Motion For Military Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad, Fahmi Amirul (2019) Design and analysis a controller for AUV path navigation system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad, Khairuddin (2016) E-Sajadah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad, Rohmanuddin (2005) The Development And Simulation Of Fuzzy Control Coordinator For Multi-Controller System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Adi, Nur'Rabiatul Tadawiyah (2018) Study and analysis of a pantograph attributes for an electrification of high speed train. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad Al-Amin, Salleh (2009) Automatic Refilling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Asyraf, Omar (2009) Investigate Blade Failure In Axial Compressor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Azim Shukri, Mohd Kamal (2010) Feasibility Study And Design Development On Automatic Feeder's Mechanism For Goat Breeding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fahmi, Daud (2011) Study A Pneumatic Muscle Actuator And Simulation For Insect Walking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Faiz, Shamsudin (2011) Hand Tool Assessment Of An Object Handling Task. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fauzi , Awang (2007) Merekabentuk Sistem Pengawal Untuk Lif Menggunakan PLC (Programable Controller) & FLC (Fuzzy Logic Controller). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Firdhaus, Hajan (2009) Development Of Sieving Machine For Palm Oil Mill Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fuad, Jamingan (2007) Design 3 Finger Gripper For AGV. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fuad, Nazif (2016) Effect Of Engine Control Unit (ECU) On Engine Performance For Naturally Aspirated Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafiz, Zulkefli (2015) GUI Controlled Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafizuddin, Ahmad Sabri (2008) Pick And Place Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Harith , Amlus (2008) Laser Cutting Of Woods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hazman , Hashim (2008) Smart Car Seat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Mohlas, Muhammad Faris (2023) Development of a system on monitoring transformer using microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad Najib, Abu Mansor (2007) Robot Humanoid CS8 (Bahu Fleksibel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Najib, Ishak (2005) Experimental Studies Of Thermal Contact Resistance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nasiruddin, Mahfoz (2009) Gantry Crane With On-Off Motor Command : Design And Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nazry , Rosley (2013) Total design of Water Tank Leaning Robot (WATCLEAR). Project Report. UTeM, Melaka. (Submitted)

Mohammad Rafi, Omar (2012) Merekeabentuk Dan Membangunkan Galah Komposit Ultra Ringan Untuk Tujuan Penuaiaan Buah Kelapa Sawit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Rhiyaad, Kamshah (2007) CSB Humanoid Robot (Leg II). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Roszwan, Jamaudin (2010) Automatic Modern Garbage System Collection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Sa'at , Noor Radziah (2015) Design Of A Smart Indoor Gardening System Via PID Control Scheme. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Shah Izham, Abdull (2008) A Feedback Control System For Suppressing Crane Oscillations With On-Off Motors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Shahin , Mansor (2013) Simulation of soot movement in diesel engine. Project Report. UTeM. (Submitted)

Mohammad Sukeri, Ahmad Nurfaidhi Sadiq (2017) Design Optimisation Of Car Jack System For An Emergency Usage Using PDS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Sukery, Nur Munirah (2016) Preliminary Study On The Capability Using Lube Oil Base On Local Virgin Coconut Oil For Transmission Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syafiq, Halim (2008) Tool Wear Characterization Of Carbide Cutting Tool Inserts In A Single Point Turning Operation Of Aisi D2 Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syafiq, Ramli (2012) Merekabentuk Dan Menganalisis Rod Penghubung. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syahid , Abdul Jamil (2010) Semi-Auto Robot For Robocon. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syazwan, Omar (2008) Force Analysis On Robotic Deburring Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Tahir, Hadi Afiq (2015) Effect of cutting parameters in milling titanium alloy ti-6al-4v using pvd carbide insert. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad Zaidi, Muhammad Aminul Fitri (2019) Developing Water Monitoring Network System And Water Treatment Using Antenna And IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammed, Marwan Qaid Abdulrazzaq (2016) Walking Motion Trajectory Generation Of Hip Powered Orthotic Device. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Mohammed, Sari Abdo Ali (2015) Recognition Of Face Detection System Based On Video. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Al-Ghaili, Munir Mohammed (2017) Experimental studies on the noise characteristics of ball bearing under hexagonal Boron Nitride (hBN) nanoparticle additives in engine oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammed Ashraf, Mohammed Faudzi (2015) Parametric Optimization Of Abrasive Waterjet Machining (AWJM) On Aluminium Using Taguchi’s Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Umar-Hassan, Mohammed Rosdi (2013) Glove Control Helicopter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohandas , Sagaran (2009) Development Of Control System For Sepak Takraw Launcher Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adib, Tukiran (2009) Development Of An Automated Keropok Lekor Cutting Machine Using Pneumatic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adib Sulhy, Mohd Zin (2009) Microcontroller Based PI Battery Charger For Solar Power Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adiran Aswad, Ismail (2012) Study And Design Of Robot Gripper Using SMA Actuator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adzhar, Saiman (2012) Design And Develop A Smart Auto Femasi System (Feeder Machine With Solar Integrate & Interface With GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Afdhal, Shamsudin (2009) The Design And Development Of Engine Intake Manifold For Proton Wira. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Affendy , Samdin (2008) Study Performance of Cylindrical Grinding On Straightness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Affi, Mohd Ali (2009) An Autonomous Vehicle Using Wall Following Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ahadlin, Mohd Ahassolehin (2016) Characterization Of Used-Engine Oil Enhance By Using Zirconia Nano-Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ahadlin, Nur Farahin (2017) CFD simulation of a shell and tube heat exchanger; effect of physical features. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Aizat, A. Hamid (2008) The Study Of Size Effect On Surface Finish When Hard Turning Aisi D2 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat, Ahmad Murad (2008) Automatic Can Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat, Ibrahim (2012) Comparison Between Concentrating Solar Power And Photovoltaic For High Power Solar Energy Harvesting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat, Mohd Noor (2010) Device For Heat Removal For Parked Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat , Mohd Ibrahim Merican (2011) Machining Process Design And Costing (Milling Operation). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat , Ahmad Tarmizi (2007) Simulation And Study On Puma Robot Configuration With Workspace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizuddin, Yusof (2010) Application Of Gyroscope Technology In Human Mobile Transporter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizuddin , Muntaha (2008) Rekabentuk Nozel Semburan Berputar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akmal Hisyam , Norruddin (2010) Friendly Aquarium Control System Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akram, Mohd Noh (2015) Development Of Auto Filling Water System Using PIC16F877A. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akram Zaki, Mohd Sabri (2008) Performance Analysis Of Evaluation Between Oil Based Coolant And Combination Of Oil Based Coolant With Palm Oil On Cutting Surface In Turning Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Alip, Mohd Zarul Amirul (2019) Development Of Intelligent Switching Power Storage For Domestic Usage. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Almirul, Halid (2012) Line Follower Robot With Proportional, Integral and Derivative Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ameeraldeen , Mohd Salleh (2010) System Development Of Parallel Robot With Industrial Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin, Abdul Thaqif (2018) Comparison Study On The Effect Of Router Tool Geometrical Features On Machining Performance For Edge Trimming Of CFRP Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin Ridhuan , Azmi (2007) Perolakan Haba Semulajadi Yang Berlaku Dalam Satu Kotak Tertutup Dan Mempunyai Sumber Haba Berdiskret Di Dalamnya. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amir, Nadia Syahida (2017) Effect of parameters on properties of sheet metal welded by rocker arm spot welding machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Amirhafizan, Husin (2014) Recycling of sawdust for floor tile application. Project Report. UTeM. (Submitted)

Mohd Amirullah , Muhammad (2015) Design enhancement and analysis of pigging device for heat exchanger fouling cleaning. Project Report. UTeM. (Submitted)

Mohd Ammar, Mohd Zakaria (2010) Pick and Place Robot Using Line Tracking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amran , Mohd Zawawi (2007) Paparan Elektronik Menggunakan Mikropengawal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amri , Mohamed Khairi (2009) Design And Analysis Of Safety Mobile Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amri , Sulaiman (2009) Design And Development Of An Automated Whiteboard Eraser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Anis, Mohamed (2014) Real-Time Object Tracking System For 2-Degree Of Freedom (DOF) Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Annuar, Khalil Azha and Mohamad Sapiee, Mohd Razali and Miskon, Muhammad Fahmi and Mohd Ab Halim, Mohd Firdaus and Harun, Mohamad Haniff and Shukor, Ahmad Zaki (2018) Modelling Asynchronous Leg-Exo Movement Effect On Exoskeleton Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Anuar, Mohammad Anis (2014) Development of a mini automatic vacuum cleaner. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Apandi, Nur Shasha Fatihah (2019) Effect of single self contained dual vacuum clamping on acrylics end milling performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Arif Faiz, Jumahat (2015) Implementation And Improvement Of Air Hole And Fin Shape Technology Towards Bicycle Helmet Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ariff, Ahmad (2012) Analysis And Design Mechanism Of Supporting Cantas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ariff, Radzuan (2013) Stable Walking Motion NAO Humanoid Robot Using Cubic Polynomial Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ariff, Siti Zaharah (2020) Optimization Of Tribo-Performance Of Oil-Impregnated Palm Kernel Activated Carbon For The Production Of Automotive Bearing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ariff , Arshad (2010) Comparison Between Combination Silencer And Single Type Silencer For Two-Stroke Noise Reduction And Its Effect On Engine Power Curve. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Arshad, Noorazian (2016) A study on relationship between hand pressure grip force with hand tool vibration at automotive industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ashraf , Abd Kadir (2008) EDM Performances Of Copper Electrode On Different Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashraf , Mohd Fauzan (2008) Co2 Laser Engraving Of Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asraf , Jasni (2008) Automated Guided Vehicle (AGV) Using PLC System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asri, Noor Suhaili (2018) Quality Recognition And Cost Evaluation Based On Activity Based Costing (ABC) For Aluminum Alloy Using CNC Laser Cutting And Water Jet Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asri, Siti Nur Izyan (2016) Solar Powered LED Decorating Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asuad , Idris (2006) Projek 'Snakes Robot'. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azahar, Mohd Noor (2010) Gantry Crane System Using Real Time Command Shaping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azemi, Muhammad Naqiuddin (2017) Investigation On The Performance Stainless Steel Impact Test Vibrational Analysis Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Abd. Aziz (2006) Universal Measuring Machine : A Study On Potential Error And Common Error In Calibration Process (Gage Block). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Abdul Hamid (2007) Pembinaan Perisian Audit Bagi Sistem Pencahayaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Ahmad (2012) Diagnosis Of Centrifugal Pump Failures Using Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Mohd Zubir (2006) Mechanism Design And Analysis of HVAC Inspection Crawler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhrul, Mohd Alias (2008) Numerical Simulation Of Combustion Process In A Furnace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azidin , Che Ismail (2008) Design And Development Of Automated Submission Assignment Depositor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azidin , Che Ismail (2008) Design And Development Of Automated Submission Assignment Depositor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aziri, Muhammad Hasif (2015) Design And Develop Robot Tracked Vehicle Platform For Navigation And Rescue Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi, Md Kosri (2011) Automatic Cat Litter Cabinet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizie , Muhammed Pauzi (2007) Warning System For Barrier Distance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizulrahman , Ayub (2005) Obstacle Avoidance PIC Mobile Robot Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan, Nur Athirah Adiba (2019) Development Of An Electronic-Based Educational Board Game For Teaching Kindergarten Kid About Spelling Of Basic English Words Using Arduino And Bluetooth (e-spelling). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan , Daud (2008) Develoment Of Pick And Place Pneumatic Manipulator Trainer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azli , Mohamad @ Ismail (2007) Fish Robot-Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Abdullah Haziq (2017) Feasability Study Of Using Vegetable Oil As A Cutting Lubricant On Conventional Lathe Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Mohamad Azizuddin (2017) Design of underwater inspection robot mechanical track system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Azman , Mahmood (2007) Rekabentuk Struktur Mekanikal Mesin Pengikis Untuk Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman Syafiq , Yusof (2013) Development Of A Pick And Place Table Top Sized Robot Cell. Project Report. UTeM, Melaka. (Submitted)

Mohd Azmi, Siti Haidar Atiah (2017) Optimisation And Analysation Of Linear Positioning Table For Drilling Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd Azrayie, Zainodin (2012) Fuzzy Logic In Position Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azri, Abdul Aziz (2008) Pengingat Masa Perubatan Digital. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azrin, Ismail (2008) Merekabentuk Pengawal PID Untuk Mengawal Kedudukan Motor Dengan Menggunakan Sistem Pakej Simulasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azrul, Omar (2009) Feasibility Study And Conceptual Design On The Automatic Fish Freeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azrul Hisham , Abdul Kadir (2007) Analysis Of Surface Integrity Of Honeycombed Aero Composite Material In Drilling With HSS Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azuddin, Iqmal Zikry (2023) Design and development of a pesticide spraying application robot for vegetables farm using raspberry PI. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Azuwan, Md Janis (2010) An Analysis Of Micro-Hole EDM Machining On Ti-6A1-4V. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azwan, Mokhtar (2010) Automatic Pet Feeder Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Dzahari, Adib Aizat (2020) Design and fabrication of tensile test specimen cutting equipment for elastomer compatibility study subjected to palm-oil based biodiesel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Effendi , Husin (2008) Design And Timing Analysis Of Variable Valve Timing (VVT) For Internal Combustion Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ehsan, Azam (2009) PI Algorithm For A Speed Control Of DC Motor With Tachometer Feedback. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ekhwan , Rahim (2009) Study On Contribution And Effect Analysis Of Coolant On Roundness In Cylindrical Grinding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Eza, Muhammad Najib (2019) Addition of lithium hydroxystereate into used cooking palm oil as bio-degradable grease formulation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fadli , Ismail (2009) An Experimental Study Of The Effect Of The RPM To Surface Roughness In Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadly Aizat, Said (2014) Multipupose Inspection Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Hashim (2005) Modelling Compact Heat Exchanger Surface. Project Report. UTeM, Melaka. (Submitted)

Mohd Fadzil, Muhamad Shafarin (2016) Incorporating Flywheel Hybrid Module In Automobile : An Embodiment Design Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzlee, Azmi (2009) PC Based Of Motorized Ball Valve Position. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzly Wahid, Mohd Ishak (2005) Artificial Intelligence Climbing Robot (AICR). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faeiz, M.Nawawi (2011) Design Improvement Of Power Tool For Safely And Quickly Cutting And Bevelling Pipes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahame, Che Daud (2013) Influence Of Cutting Condition On Product Quality When Cutting Aluminum Alloys. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Idrus (2009) Solar Peak Power Tracker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Abd Majid (2010) Development Of A Mini Turbine To Generate Electricity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Taher (2015) Design And Development Of Autonomous Sweeper Robot For Badminton Court. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faidzal , Salkah (2008) Oil Palm Seed Transporter : Structure Analysis & Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairid, Baharim (2008) Kesan Sirip Ke Atas Tempoh Pendidihan Air Di Dalam Cerek Biasa. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairuz, Mohd Rashid (2006) Design, Simulation And Analysis The Pressure Limiting Valve For Automobile Tubes Or Tubeless Tyre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairuz, Shahadan (2009) Investigating The Force Imposed In Polishing Process For Comau Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairuz, Masrom (2009) Design Water Tank Level Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fais, Ismail (2010) Tuning Single Cylinder Two - Stroke Engine Or Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz, Abd Rahim (2007) Design, Development, And Fabrication Of Tyre Lug Wrench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz, Hat (2015) Development Of Hand Gesture Robot Using Xbee Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz , Hassan (2007) Speed Control Of CESB Conveyer Belt With PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Razali (2007) Real Time Clock Using PIC Micro. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Abu Bakar (2009) Development Of 3-Axis Routing Machine Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Mohamad (2010) Surface Finish Study Of Mild Steel Machined By Carbide Cutting Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizul , Rozali (2007) Prismatic Lifter Robot By Using Programmable Logic Control (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizul Shazrin , Shukor (2007) The Hopping Robot With One Leg. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faqrul Radzi, Tahiruddin (2008) Merekabentuk 'Diffusion Silencer' Untuk Mengurangkan Kebisingan Enjin 2 Lejang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farid, Ghazali (2010) Design And Analysis Of Modular Fixture Of PCB Routing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farid, Mizan (2008) PC Based Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faridzan, Azizan (2008) Programmable Water Jet Show In Aquarium Controlled By PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fariq, Mohamad (2010) W-Shape Beam Subject To Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faris, Mohd Nasirruddin (2010) Prototype Of Fire Fighter Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farmezee, Abdullah (2008) Membuat Dan Menguji Unit Kawalan Suhu. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farred Akma , Awang (2007) Robot Humanoid CS-8 (Pengolah Bahagian 1). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farris , Mohd Daud (2012) Reka Bentuk Dan Pembangunan Galah Teleskopik Pneumatic Bagi Penuaian Buah Kelapa Sawit Dengan Pemampat Udara Mudah Alih Dan Tiga Segmen Paip Aluminium Berlubang (Gred Marin). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farriz, Md Basar and Khalil Azha, Mohd Annuar and Madiha, Zahari and Muhamad Faizal, Yaakub and Mohd Firdaus, Mohd Ab Halim (2011) A New Source Of Renewable Energy From Lightning Return Stroke: A Small Scale System. Project Report. UTeM. (Submitted)

Mohd Fauzi, Ab Aziz (2012) Diagnosing Rolling Element Bearing Failure Using Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Ab Rahman (2009) Kajian Pembahagian Aliran Tenaga Untuk Penggunaan Tenaga Cekap. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Abdul Aziz (2010) PIC Trainer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Mohamad Firdaus (2017) To Study The Concept Of Perpetual Motion On Table Fan By Using Permanent Magnet. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Muhammad Faiz Hakim (2023) Design and fabrication of multi-purpose chair with an ironing board and storage compartment. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Fauzy, Khamis (2010) Study A Pneumatic Telescopic Cylinder Arm Operation For Variable Load Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazli, Manaf (2008) Merekabentuk Dan Melaksanakan Sistem Kawalan Paras Air. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazrin , Razali (2009) Investigation On The Effects Of Rake Angle Variations On The End Mill Wear, Cutting Forces And Surface Finish. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazry , Abdul Aziz (2007) Pembangunan Sistem Hidraulik Air Bertekanan Rendah Menggunakan Pam Empar. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Fekri , Ab Halim (2009) Solving Tracking And Regulation Of A Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fidha Uddin , Alias (2013) Boxy Aircraft Component CNC Lathe Machining- Haas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fijam , Abdul Halim (2010) Mobile Balancing Robot With Two Wheels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Jamaludin (2013) Prediction of helical gear life using wear debris analysis. Project Report. UTeM, Melaka. (Submitted)

Mohd Firdaus, Abd Ghani (2006) Water Level Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Aluwe (2007) Two Robots Pushing A Beam (Movement And Communication). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Rusli (2008) Development Of Servo Motor Pick And Place Robot With PIC16F877A Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Ab Rashid (2010) Design And Development Of Manual Robot Using Mecanum Wheels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Mohd Hussain (2008) The Development Of An Active Roll Control For Heavy Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Mohd Noor (2009) Comparatives Study On IDMT Overcurrent And Earth Fault Relay : Micro MK2000 And ABB SPAJ 140c. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Mohd Nordin (2010) Development Of Simple Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Roslan (2009) Ultrasonic Parking Range Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Rusli (2008) Development Of Servo Motor Pick And Place Robot With PI16F877A Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Hashim (2007) Design And Build New Cold Press Mini Machine By Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Omar (2015) Experimental analysis and study of fuel saver device. Project Report. UTeM. (Submitted)

Mohd Firdaus , Rameli (2007) Unit Pacuan Hidraulik Boleh Ubah Kelajuan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Fitri , Jamaludin (2009) Assessment Of Wire EDM Parameters On Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fuad, Abd Wahab (2009) Mesin Pembakar Roti Automatik (Automatic Toaster Machine). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fuad, Mohammad Kasim (2012) Single Chip Solution For Vending Machine Controller Based On FPGA. Project Report. UTeM, Melaka. (Submitted)

Mohd Fuhadi, Mohd Nor (2006) Dynamic Forces & Stress Resultant In A Connecting Rod. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafeez , Nazri (2007) Pick And Place Robotic Arm With Training Kit (Software). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafieni , Md Yakim (2009) Design Of Water Level Activated Alarm System For House Water Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiez, Ismail (2008) Design Of PI, PID, PD Controller For DC Motor Speed Controls Using Analog Circuitry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafis, Hassan (2010) PIC Based Anti-Tie Down Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafis , Bajuri (2008) Analyze The Performance Between Pure Oil-Based Coolant And Combination Of Oil-Based Coolant With Palm Oil On Cutting Surface In Milling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiszuddin, Mohd Puaad (2009) Development Of Workholding Device For Loaded PCB Cutting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiszudin , Ahmad (2013) Design And Fabrication Of Ball Feeder Mechanism And Body For Tennis Ball Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd Hafiz, Abdul Manan (2008) Intelligent Line Follower Robot Using LDR Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Abdul Rahman (2005) Investigating The Performance Of Traveling For XY Table. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Sulaiman (2009) Controller Realization Of An Industrial Cascade Level System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Ismail (2009) An Experiment Study Of The Effect Of Cutting Speed, Depth Or Cut And Feed Rate To Roundness In CNC Lathe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Mohd Zailan (2007) Design Of Electrical Hardware And Controller For Nata De Coco Scrapping Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Rauzan (2006) Robot Beroda 3 Dengan Kawalan PIC16F84 Dan Pengesan Infra Merah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Taib (2010) Mobile Robot With Floor Measuring Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz Fahmi, Abdol Sukor (2015) Study On The Effect Of EDM Die Sinking Parameters On The Surface Finish Of Mild Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizoul, Omar (2008) Intelligent Control Of Magnetic Bearing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizoul , Omar (2008) Intelligent Control Of Magnetic Bearing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizzie, Ramli (2012) Vehicles Accident Prevention System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haidi , Basiran (2008) A Vision Based Positioning For Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairee , Abu Zarin (2006) Wind Turbine Blade Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairi, Mohd Shafie (2008) Develop PC Based Controller Using PIC16F84A For Flying Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairi , Hamad Tajudin (2008) Study On Drilling Aero Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairul Anuar , Mohd Khir (2007) Robot Pengikut Isyarat Infra-Merah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairy , Basir (2008) Penilaian Prestasi Keatas Mekanisma Penjanaan Semula Tenaga Kinetik Gas Ekzos Untuk Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hajazi, Aini Syahida (2016) Investigation of drilling process using nanofluid. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hakim, Ramli (2015) Development Of Mobile Air Flow Monitoring Device For Finned Fan Cooler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Halit, Muhammad Fakhrurazi (2017) Optimization of vision-guided mobile robot navigation using dual camera. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Halme, Ahmad (2008) Merekabentuk Sistem Mekanisme Penutup Untuk Tiub Pengumpul Darah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hamzi, Zakaria (2009) PC Based Experiment On MS150 Modular Servo System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Harun, Arfah Hafieza Mohd Harun (2019) Development Of An Intelligent Trainer Board For Arduino Components. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hashim, Mohamad Fitri (2016) Design A Maintenance Schedule Using Reliability Evaluation For Rolling Machine At Power Booster Engineering & Maintenance Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hashim, Mohamad Hasnor (2016) Generate Current From Waste Heat Called Seebeck Generator Using Peltier Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hayatulnizam, Mohd Nasir (2008) Moving Train-Car Traffic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hazihan , Mohamad (2007) Simple Friction Welding Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Hazlie , Hassan (2007) Anti Smoke Campaign Control By PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hazroy, Rahaman (2015) The Effect Of Engine Oil On Vehicle Emission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmi, Suid (2007) Pick And Place System Using Controlled Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Herman, Mohd Aris (2008) PLC Interfacing Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hezerulnizam , Harun (2007) To Design A Cam-Operate Vertical Windmill For Electric Power Generation. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Hidayat, Shahabudian (2010) Mapping Mobile Robot With Slam Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hilal , Abdul Aziz (2010) Study And Measurement Of Cutting Tool Coating Thickness By Usign Beta Thickness Gauging Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hilman , Kamaruzaman (2013) Thermal comfort study for student laboratory. Project Report. UTeM, Melaka. (Submitted)

Mohd Hilmi, Zakaria (2008) Ultrasonic Range Meter Using PIC 16F873A Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hilmy, Mohd Yusof (2007) Surface Integrity Of AISI 1045 Steel When Machined With TiC Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hosni , Mamat@Ariffin (2007) Green House Solar Powered For Plant Watering System. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Husin, Mohd Haizal and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli and Jenal, Ruztamreen and Mat Dan, Reduan and Taib, Mohd Taufik (2019) Parametric Investigation Of Biodiesel Properties To The Storage Condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Huzairi , Saribin (2009) Mereka Bentuk Dan Menghasilkan Prototaip Mesin Membelah Dan Mengeluarkan Isi Buah Koko. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Idris, Muhammad Hassannuddin (2018) Bluetooth Remoting Lawn Mower. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Idzan , Ibrahim (2008) Design And Development Studies Related To Peristaltic Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Idzham Faiz, Idris (2015) Mengurangkan Kerugian Minyak Sawit Mentah Dengan Memisahkan Laluan Buah Lerai Dan Tandan Kosong Sebelum Thresher Proses Melalui Pengubah Suaian Rekabentuk Mekanikal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ihsan , Hussin (2009) Development Of Rotor For Axial Flow Compressor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ikhwan , Muhamad (2011) Intelligent And Interoperable Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ikmil Fadzrizan, Mohd Hanif (2007) Robot Humanoid CS8 (Leher Fleksibel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ikram, Idris (2009) An Optimization Of Temperature Controller By Using Programming. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Imran , Wan Hassan (2010) Ascend Climbing Pole Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Iqbal Dhilbir, Muhammad Firdaus (2019) Smart LPG cylinder monitoring system for consumer use. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Irfan , Mat Rozali (2008) Humanoid Robot Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Irnaiman, Bakir (2008) Automatic Level Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Iskandared'zuan, Mohd Parok (2011) Development Of All Terrain Robot Prototype For Military Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ismail, Jarkasi (2008) Kajian Sifat-Sifat Serangga Dan Rekabentuk Mekanisma Penghalu Serangga Secara Tidak Bertoksik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ismail , Othman (2007) Pengotimuman Tenaga Secara Automatik Menggunakan Aplikasi PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Isnaini , Masran (2008) Study The Effect Of EDM (die-sinking) Parameters On Surface Roughness For Machining Tool-Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izhar, Sapie (2008) Performance Analysis Of Different Shape Of Carbide Insert For Turning Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izwan , Mansor (2009) Analysis The Contribution And Effect Of Coolant To Surface Roughness In Cylindrical Grinding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izzuwan, My Yusoff (2008) Design PI, PD,PID Controller For Motor Speed Control Using Simulation Package. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jabar , Mohd Shuhari (2008) The New Invention Of Electromechanical Dustbin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jahid, Muhammad Izzul Islam (2024) Speed bump and pothole detection for children’s scooter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Jamain, Iklil Munawwarah (2024) Preventive maintenance implementation and its effect on maintenance area outcomes : A case study of lake maintenance in Putrajaya central wetland. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Jamaluddin, Ismail (2009) Forward Kinematic Of Six Degree Of Freedom For FANUC LR Mate 200iB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jazrin, Shamsul Bahrin (2009) Programmable Logic Control (PLC) Application For Stamping Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jofrainee, Mohd Fakrul Nizam (2016) Lightweight Reflexology Block From Empty Fruit Bunches Of Palm Oil Wastes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Johar, Mohd Khairul Asyraf (2018) Design Of Supply Generator From Pressure On Water Flow Using Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Johari , Sanimin (2010) Ultrasonic Guided Obstacle Detection Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamil, Mohd Zahari (2005) Home Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamil, Ahmad Ridhwan (2017) Development Of An Autonomous Robot For Inspection System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamil , Che Mat (2015) A repair and overhaul methodology for 4 stroke gasoline engine. Project Report. UTeM. (Submitted)

Mohd Kasim, Mohd Fazli (2016) System Liquid-Cooled Panel Air Conditioners Use Water As A Coolant Applying The Peltier Effect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kasim, Mohd Kamal (2014) Micro hole drilling by industrial CO2 laser. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Khafizuddin, Khairddin (2010) Inverse Kinematics Solution For 6 Degree Of Freedom Of Fanuc LR Mate 200IB Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khaidzir, Nurzaikhanazira (2016) Learn By Demonstration Control Algorithm For Cleaning Robot. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Mohd Khairi , Abdullah (2008) Heat Transfer To Fluids In Laminar Flow Through Ducts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairol, Mohd Daud (2010) A Study On Insulation Material Of Energy Saving Purposes In Rooftop Design. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mohd Khairrul Amry , Romli (2007) Integrated Design - Grass Cutter And Collector Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd Khairul Adly , Adnan (2007) Tunnel Inspection Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Anuar, Abd Razak (2010) Smart Housing Lighting System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Faizie, Tarmudi (2010) Forward Kinematic Solution: Visualization of Rhino XR-3 Robot For 5 Degree Of Freedom. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Izham, Abdul Latiff (2009) A Study Of Using Solar Energy For Stadium In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Izzat , Alwi (2008) Design Of JIG Used To Hold Ball Valves For Surface Polishing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Mazni , Mohamad (2013) Comparative study on stability of nanofluid using two different dispering agents. Project Report. UTeM, Melaka. (Submitted)

Mohd Khairulfikri, Samsudin (2009) Design And Prototyping Of Semi-Automated Storage And Retrieval System (S-AS/RS) Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairulnizam, Mhd Nasir (2008) Design And Development Of Automated "Press Device" For Emerged Stamp. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairur Rahim , Awang (2013) Start Stop System. Project Report. UTeM, Melaka. (Submitted)

Mohd Kharil@Hamzah, Muhamad Nafis (2019) Smart Aquaponics Monitoring System Based On IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Khir, Muhammad Khairul Hafizi (2019) Development Of Smart Car Parking By Using Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Latfi, Marwan Shafiq (2017) Design And Development Of Pineapple Leaf Cutter (PLC) Device In Pineapple Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Latif Marekan, Ainur Munira (2016) Transducer Energy Based On Electric Fan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Maliki, Mohd Adli Arif (2016) Study to optimise interior field flow of a lobe pump. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Mazli, Mohd Ismail (2007) Merekabentuk Gandaan Kamiran Tidak Tetap Menggunakan Logik Fuzzi Sebagai Kawalan Penjanaan Automatik (AGC) Pada Model Turbin Gas. Project Report. UTeM, Melaka. (Submitted)

Mohd Mazlisyam , Salleh (2007) Inovasi Pengiklanan Terkini. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mokhtar, Nur Farah Ainaa (2019) Development Of Smart Water Usage Monitoring System To Monitor And Collect Water Billing In Real Time. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mu'adz , Md Eswan (2009) Heat Transfer In A Terrace House With Using Rock Wool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Muhayiddin, Muhammad (2009) Semi-Automated Dispensing Medicine System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Murshid , Saad (2007) Rekabentuk Dan Analisis Bicu Lantai Untuk Kenderaan Ringan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mushrif , Abd Razak (2008) Merekabentuk Dan Menguji Injap Kawalan Air Paip Utama Untuk Tangki Simpanan Air Hujan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Muzzammil, Roslee (2010) Design And Analysis On Structural Of Shrimp Paste Cutting Machine For Small Medium Industries (SME) In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nafi, Siti Natrah (2018) Analysis Of The Performance Of PI Controller For Multivariable Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Naim, Sapie (2008) Fabrikasi Alat Pelontar Bola Takraw. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib, Mahmood@Mahmud (2005) Dancing Robot For Robot Contest. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib , Ab Manan (2007) Analysis Of A Device That Inflates The Inflatable Items. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Najib , Shaari (2010) Design And Development Of Four Wheeled Autonomous Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib , Salim (2006) Robot Pengelak Halangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Naqib, Derani (2009) Development Of Portable Head Massager Concept Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nashmal , Mohmad Rozee (2007) Mereka Dan Membina Pintu Pagar Keretapi Automatik Dengan Menggunakan PLC : (Design And Implementation Of Real-Time Automatic Controlled Gate For Train Monitoring System Using PLC). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Nashriq, Ismail (2010) Tyre Lifting System For Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nashriq, Sulaini (2008) Design And Fabrication Of Solar Assisted Drying Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Ishak (2007) Mekanisma Dan Kawalan Penyelamat Bagi Roboclimb. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Ahmad Haikal (2024) Optimization of machining parameters during Five-Axis Multi Axis-Flank Milling for aero-structural component. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nawi, Al Alif Elmi (2016) Optimization On The Nanoparticle Suspension For Better Dispersion In Liquid Phase. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazrin, Jusoh (2013) WVOM (Wide View Object Movement) Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ngesom, Ahmad Hafizzudin (2016) Car security system by Arduino and smartphone. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nizam, Ahmad Basyir (2019) Development Of Smart Shopping Cart Using RFID & GPS System With IoT-Cart-o-Matic. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nizam, Othman (2009) Design And Development Of Waste Trap And Removal System For Monsoon Drains Application Using PLC-Based System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noh, Muhammad Izzuddin (2015) Tool life of high speed steel hardfaced with tool steel deposited by GMAW. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Noor, Muhamad Fadhli (2018) A Study Of IoT Based Energy Meter Monitoring Via Thingspeak. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Noor Hafiz, Biding (2008) Parking Counter With Automatic Crossbar And Led Display. Project Report. UTeM, Melaka. (Submitted)

Mohd Nor, Noorhanani (2015) Investigation the effectiveness of EDM performance and tool roughness on surface finish of inconel 718. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nor Hakim, Mohd Taib (2005) To Identify On Thermodynamic Steam Trap Failure Mechanism On Horizontal Installation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Hazlami, Nor Adnan (2008) Heat Flow Analysis Of Solar Assisted Drying Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Norhisham, Che Soh (2009) Forward Kinematics Solution For 5 Degree Of Freedom Of Rhino Xr-3 Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nuruddin, Mohamad Luqman Alhakim (2024) Development of dustless ceiling fan blade cleaning system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nurul Hisham , Che Aman (2007) Netbot Watcher. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Pauzi, Muhammad Afiq (2018) Design An Industrial Robot Milling Machine Application Using ABB IRB 120. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Qusyairi, Badrul Hisham (2014) Design of robotic structure for people with disabilities for eating and drinking motion (eating). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Radzi, Adil Alimi (2019) Performance evaluation of counter rotating vertical axis wind turbine in low wind speed condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Rafi, Ramli (2009) P.I.C Based Sweeper Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rahim, Mohd Rafie (2009) Design Of PI, PD And PID Controllers For Motor Speed Controls Using Simulation Package System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ramaly, Mohammad Hakim (2024) Optimization of cutting condition to minimize damage during. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Raman, Fazrin Khalilah (2019) Optimization Of Laser Cutting Parameters On Surfaced Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ramzi , Abdul Hamid (2007) Merekabentuk Pengawal Untuk Mekanisma Sistem Alat Pengangkat Menggunakan PLC Dan FLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rashidi, Md Puzi (2014) Implementation Of Risc Architecture In Simulink And FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razali, Mohammad Taqiyuddin (2016) System response for lightweight robot arm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Razali, Mujahid (2016) The Intelligent Control Lawn Mower Technology For Modern Accommodation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razali, Nur Atikah (2017) Effect Of Different Thermal Insulator Materials On Thermal Energy Storage (TES) Heat Loss. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Razullee, Nur Syahirah (2018) Smart PLC: Development Of An Electronic Educational Quiz Kit To Test Student Knowledge On Converting Of Timing Diagram To Ladder Diagram. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridwan, Razali (2008) Design And Fabrication Of Energy Efficient Drying System For The Solar Drying Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzal, Abd Razak (2005) Karbon Teraktif Dari Tempurung Kelapa Untuk Penapis Air. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzuan , Ab Kadir (2008) Membangunkan Fabrikasi Mesin Pembengkok Paip Yang Digerakkan Dengan Kuasa Motor Manual. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzuan , Mohd Arip (2007) Kinematik Hadapan Bagi Robot Kecil Berjalan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Riezzun, Zainal Abidin (2005) Robot Pengesan Halangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rizal, Nurul Qadriyah (2023) Development of precision farming irrigation and fertigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Rizal Amrie, Safi'in (2009) Nonliear Controller For Gantry Crane Based On Partial Feedback Linearization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rody, Mohamad Zin (2005) Analyze Of Flue Gas From Steam Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Roszaimie, Mohd Ramli (2010) Design Of Ridden Hexapod Robot For Amusement Park. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rushimin , Mohd Amin (2006) Study On Cutting Tools wear In EDM Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sabri, Mohamad Nur Azmie (2019) Analysis of energy consumption in air conditioning system at Technology Campus UTeM, Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sabri, Mu'adz (2021) Acoustic Induced Vibration analysis (AIV) in piping. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Safeai, Shahrul Affifudin (2019) Design and development jig and fixture for waterjet machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Saffar, Seha (2014) Development of PLC based navigation system for mobile robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Safuan, Othman (2009) Automatic Speed Control Suction Fan For Electric Kitchen Hood. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sahet, Muhammad Afnan (2017) Development Of Rice Cleaner By Using Arduino Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sahril, Amat Aripi (2008) Intelligent Control Of Magnetic Bearing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sahzrin, Alias (2015) Automated Smart Hanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saiful Azhan , Sidik (2008) Pembangunan Teknologi Hidraulik Air Bertekanan Tinggi Untuk Sistem Hidraulik Bergerak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saiful Azim, Khairul Anuar (2008) Text Encryption And Decryption Software Using Microcontroller. Project Report. UTeM, Melaka. (Submitted)

Mohd Saifulddin, Puteh (2007) Energy Efficiency In Ofice Building-Practical Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saleh, Afferry (2016) Development Of New Magnetic Clamping For Lathe Machine (Model GH-1440-3). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salehuddin , Paiman (2007) Analisis Prestasi Minyak Pelincir Terhadap Enjin Petrol Empat Lejang 100CC Satu Silinder. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Salihudin, Mohd Tahir (2005) Automated Deep Fried Production Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salim, Norazraie (2015) The Development Of Pressure Sensor For Piping System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salleh, Nur Syahirah (2019) A design and fabrication of motorcycle jack lifter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Salmi, Munirah (2016) Water Level Tank Using Fuzzy Logic Controller. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Mohd Saparin , Mat Junoh (2006) Rumah Pintar Dikawal Oleh PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shaffiq Sazali, Mohd Ismail (2008) Reka Bentuk Alat Pelontar Bola Sepak Takraw. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shafiq , Saipollah (2008) Design And Simulation Of Robot Spray Painting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shafiq Wazzan, Razali (2009) Modeling Of Traffic Light Control System Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shafiz , Said (2007) Design And Implementation Of Real Time Four Junction Traffic Light Monitoring System Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahib, Ab Aziz (2013) MYKAD Detector For Alcohol Vending Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahril, Ahmad Khiar and Sharin , Ab Ghani and Musa , Yusuf Lada and Imran, Sutan Chairul and Gan, Chin Kim and Mastura , Mohammad Taha (2014) Design And Development Of Smart Monitoring System Using Programmable Logic Controller Applied For Domestic Distribution Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahrim, Mohammad Shah All-Hafiz (2017) Design and development of the round bar motorize jig for the rotary abrasive water jet (RAWJ) process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Shahrin, Darmin (2008) Inexpensive PLC Output Port Expansion Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahrizal, Abd Latif (2005) Alloy Material With Carbon Contain From Coconut Shell Material For Seal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahrizan, Mohamad Iesa (2011) The Optical Character Recognition (OCR) System With Template Matching. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shaifulredza , Zainol (2007) Development Of Ping-Pong Ball Collector Robot (Hardware). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shakir , Md Saad and Amat Amir, Basari and Sharatul Izah , Samsudin (2009) Control Of A Real Cart-Ball System: Comparison Between Model Based And Fuzzy Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shamir, Azman (2007) Two Robots Pushing A Beam (Distance And Sensors). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sharil, Abdul Bahari (2008) Rekabentuk Pencengkam Untuk Mekanisma Pengangkat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shazni, Amerisah (2009) Development Of Low Power Air-Conditioning Using Water Chilled System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shazwi, Mohd Sharif (2008) Design The Line Follow Robot Sorting Mechanism Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shokray , Yahaya (2009) Portable Digital Blood Pressure Monitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sofi, Muhammad Norman Al Hafidz (2024) Enhancing the productivity of triangular solar distillers using inexpensive porous materials. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sufian, Abdul Karim (2009) Input Shaping For Vibration-Free Positioning Of Flexible Manipulator Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sufiz, Ibrahim (2009) Attendance Free Parking Counter Using Microprocessor With Magnetic Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Suhaini, Muhammad Syazwan Hakimi (2018) Study And Development Of Automation Data Management Of Arduino Ohmmeter Using Keysight VEE Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sukarno, Aina (2015) Analysis on human-robot collaboration through affective engineering. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Supinar, Mohd Habib (2017) Harvesting Of Waste Energy From 1.0 HP Air Conditioner In Production Of Free Hot Water. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafieq , Mohd Saufe (2007) Investigate The Influence Of Cutting Fluids Direction To The Tool Life. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq, Abdul Halim (2007) Humanoid Robotic Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq, Abu Bakar (2015) Penyediaan Peralatan Ujikaji Untuk Pembinaan Robot Binaan Tele-Operasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq , Dzulkapli (2008) Study The Effect Of Wire-EDM Parameters On Surface Roughness For Machining Die-Steel. Project Report. UTeM, Melaka, Malaysia.

Mohd Syahid, Alwi (2008) Moving Train-Car Traffic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahir, Abdul Rashid (2013) Man-Machine Optimization (MMO) For Technicians In Semiconductor Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahir, Zulkifli (2011) Improvement Of Low Pressure Water Hydraulic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahrir , Ribuan (2009) Development Of Fuzzy Logic Temperature Controller - Micro Controller Base. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syamsuhada , Bakri (2009) General Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syazman , Jaafar (2013) Laser Machining Of Waste Plastic Products. Project Report. UTeM, Melaka. (Submitted)

Mohd Syazwan , Mohd Azli (2007) Microweb And Coin Slot For Snack Vending Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syukri, Mohamed (2009) Automated Factory Safety Control System Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Tajuladnan, Mohamad Hazim (2021) Investigation of diesel and bio-diesel fuel deposits on a hot wall surface by using simplified method test. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Tarmizi , Zulkapli (2007) Pick And Place Robotic Arm With Training Kit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Taufiq, Haron (2006) Study Of Laser Cutting Machine & Its Application In Malaysian Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yasser , A. Rahim (2007) Mekanisma Dan Kawalan Pencengkam Bagi Roboclimb. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yazri , Ismail (2009) Automatic Rubbish Collector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yunus, Muhammad Hazim (2017) Characterization of fuel additive for fuel saving and injector optimization. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Yunus, Siti Syahirah (2016) Investigation On Thermal Conductivity Functionalized Multiwalled Carbon Nanotubes Based Nanofluids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusof, Khairul Aqil (2017) Design of modular-based underwater inspection robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Yusoff, Muhammad Hilmi (2016) Smart Bicycle Safety System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusop, Sophya Liyana (2010) Automatic Handwash System Using Microncontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusri, Abdul Halim (2007) Kajian Keberkesanan Penggunaan Alat Penstabilan Tenaga. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusri, Harun (2008) Design And Development Of Turntable For Automatic Sorting System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaeiem, Alwi (2005) 2-Axis Robotic Arm Manipulator For Education. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zahir , Kamarudin (2015) Conceptual design and analysis of a novel wave energy harvester for Malaysian shore. Project Report. UTeM. (Submitted)

Mohd Zaid, Awang (2013) Effects Of Workpiece And Tool Rigidity On Machining Performances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaim, Zulkifli (2008) Design And Construction Of An Automated System For Parts Assembly Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zain, Aliff Akmal (2019) Security Letter And Parcel Box Using GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zainal, Muhammad Iktisyam (2015) Development Of An Unmanned Underwater Remotely Operated Crawler (ROC) Based On Wheel Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaini, Mohammad Noh Faiz (2019) A study on vibration behavior on vertical washing machine via vibration meter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zaini, Mohd Ghazali (2009) Control Of Practical Inverted Pendulum Using State-Feedback Control Scheme. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaini, Norsolleha (2017) Investigation Of Wear Behaviour By Different Nanoparticles In Conventional Oil On The Ball Bearing Tested Using Extreme Pressure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zakaria, Mohamad Zuhailmie (2016) Effects Of Branch Pipe Diameter Ratio On Fluid Flow In Y-Junction Pipe For Combining Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zakaria, Muhammad Akmal (2014) Modelling effect of cutter geometrical feature for trimming CFRP composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zakaria , Mamat (2007) Pengawalan Kelajuan Kipas Secara Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaki, Abu Bakar (2009) Wireless Camera Controller System For Mobile Robot Using RF. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaki, Danial ‘Afif (2023) Development and analysis of an embedded software for cili-padi picking robot framework using MATLAB. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zaki, Rukhmi Rulhi Hafiz (2021) Comparative study of the tribological performance of internal geometry structures of 3D-printed PLA polymer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zaki Hosni, Bakri (2007) Development Of Modular Virtual Instrument. Project Report. UTeM, Melaka. (Submitted)

Mohd Zakwan, Mohd Razi (2012) Rekabentuk Dan Fabrikasi Pembuka Nat Tayar Kereta Pelbagai. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zambre, Mohammad Nurul Safwan (2016) Development of holding jig for cutting of polymer foam material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zamri, Hassan (2005) Jek Hidraulik Mudah Alih Untuk Kereta. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zamri, Muhammad Zakwan (2024) An analysis of road light intensity on double lane road with lamp pole on kerb side edge. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zamri , Gzali (2007) Influence Of Drill Geometry On Burr Formation Characterization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Za’im, Mohd Azmi (2008) Sistem Pemapar Kitaran Masa Dan Kelajuan Motor Berkos Rendah Bagi Tali Sawat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zharif, Omar (2015) Analysis Of Planetary Transmission System Flywheel Hybrid Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zul Hilmi, Baharudin (2011) Optimization Of Renewable Hybrid System Using Homer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulfadhli, Salehan (2015) Product Identification And Robotic Arm Controller System Using Artificial Neural Networks And Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulfakar, Nur Allyssa (2019) Food waste for electricity production in Microbial fuel cell (MFC). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zulhelmi , Halim (2007) The Temperature Control System Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhilmi, Nasharuddin (2015) Egg Incubator With Bluetooth Controller Interface With Powered Android Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhilmi, Zakaria (2008) Programmable logic controller (PLC) based induction motor starter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhilmi , Omar (2009) Development Of Vise For Drilling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhimi, Ali (2009) A Feasibility Study On 'Highway Dummy Signal' Powered By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulkhairi , Ruslan (2009) A Practical Optimal Controller For Gantry Crane Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zuwairy, Rosdi (2008) Development Of Controller For Front Cover Assembly Station For Flexible Manufacturing System Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Ali, Luqmannurhakiem (2017) Investigation On Thermal Resistance Property Of Natural Hybridization Fibers (Oil Palm & Coconut) Through Conduction Concept Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Salim, Ariff Shazal (2018) Automatic food processing system using water hydraulic technology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd. Shuhada, Muhammad Khusyairi (2017) Development Of New Clamping Method For Waterjet Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd. Syafiq, Md. Taib (2009) Merekabentuk Dan Menganalisa Mekanisma Pergerakan Tangan Mekanikal Menggunakan Lego Mindstorms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Syafiq , Md. Taib (2010) Merekabentuk Dan Menganalisa Mekanisma Pergerakan Tangan Mekanikal Menggunakan Lego Mindstorms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Taib , Dora and Syed Najmuddin , Syed Hassan and Izaidin, Abdul Majid and Zawiah , Mat and Norliah, Kudus and Fauzi, Kamarudin and Amir, Aris (2009) Kajian Impak Sosioekonomi Loji Penapisan Petronas ( Melaka ) Sdn Bhd Ke Atas Kawasan Setempat Dan Pembangunan Semula Kawasan Yang Sama. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd.Syahman , Abu Mos Onn (2006) Design And Implementation Of An Autonomous Sumo Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohmad Bakhari, Muhammad Ashraf Wajdi (2017) Development Of Road Power Generation By Applying The Conversion System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohmad Khalid, Nur Zalikha (2018) Design of NPID double hyperbolic for precise positioning of machine tool application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohtar, Nursharina (2016) Optimization Of Drilling Parameters On Diameter Accuracy In Wet Drilling Process Of AISI D2 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mokhta Za’bah, Nur Aqilah Aliah (2024) Design and development of a remote-controlled solar-powered cleaning robot for canal area applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mokhtar, Muhammad Faiz (2017) Investigation of tool wear and surface roughness when machining AISI 1045 using alumina ceramic cutting tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mokhtaza, Aliff Amirudin (2016) Addition Of Molybdenumdialkyl Dithiophosphate (MoDTP) Into Zinc Diamyldithiocarbamate (ZDDC) Induced Canola Oil Bio-Lubricants As Tribological Properties Improver. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mooruthy, Ruban (2017) Design And Fabrication Of Automobile Blind Spot Detection System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muahmmad Zhafri, Abd Rashid (2011) Anti - Theft Security With Notification (SMS Security Notification). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muda, Mohd Syarafi (2009) Automatic Water Level Control And It’s Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mufidah, Razali (2009) Analyse Data From Matlab And Display It Through 6800 Microprocessor Controller. Project Report. UTeM, Melaka. (Submitted)

Muhaimin Zunnur Qoyyum, Mohd Najib (2008) Merekabentuk Pengawal Bagi Sistem Bandul Songsang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Adi , Sulaiman (2009) PLC Controlled Palletizer System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Afiq, Bachok (2013) Design A PID Controller For An Activated Sludge Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Arfauz, A. Rahman and Shariman, Abdullah and Azrul Azwan , Abdul Rahman (2011) Design And Development Of 6 Axis Robotic Arm Slider. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Ashadi , Abdul Rahman (2007) Autonomous Mobile Robot Navigating Towards A Preset Target : Hardware And Control Of Mobile Robot Locomotion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Ashraf , Zulkifli (2015) Design and analysis of clutch system for flywheel hybrid module. Project Report. UTeM. (Submitted)

Muhamad Aszahari, Muhamad Syahir (2016) Smart indoor air monitoring system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Azriff , Zulkapli (2015) Traffic light with warning voice. Project Report. UTeM. (Submitted)

Muhamad Basha Abas, Basrah (2011) Prototype Maneuver Robot's Platform Via Personal Digital Assistance (PDA) With Bluetooth Pan Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Bukhari Al-Mukmin, Mohamad Zahar (2011) Design And Development Of Automatic Fire Fighting Robot. Project Report. UTeM, Melaka Malaysia. (Submitted)

Muhamad Daleel , Mohd Idros (2013) Optimization Design Of Slicing Machine Using Design Of Manufacturing And Assembly (DFMA) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Edi , Basri (2007) Car Lamp Failure Detector And Warning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Fadilah, Aqilah (2017) Development Of Cleaning Whiteboard System Using Programmable Logic Control (PLC). Project Report. UTeM, Melaka. (Submitted)

Muhamad Fahmi , Abu Bakar (2007) MCS-51 Monitor Program. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhamad Faisal, Tamar (2015) Addition Of ZDDC In Corn Oil As Antioxidant As Lubricant Substitution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Faizal , Mahmood (2008) Inverted Pendulum Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Fariq, Ahmad (2013) Remote Measurement Of Wearable Sensor Using ZigBee. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Fathil, Moin (2008) Design A Feasible Cloth Drier Utilizing Domestic Waste-Heat For Household Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Fazrul , Md Zain (2008) Simulation Of An Articulated Robot Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Hafiszan, Kamarul Zaman (2007) Robot Humanoid CS8 (Tangan Bahagian 2). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Hafizuddin , Mustafa (2015) Android-based wheelchair controller. Project Report. UTeM. (Submitted)

Muhamad Irfan Rafiq, Azmi (2015) Fundamental Tribological Study Of Refined Glycerine, Oleic Methyl Ester And Crude Glycerol For Engineering Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Kamal , Yaakob (2007) Pengingat Masa Perubatan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khalis , Ramli (2009) Design And Analysis Of Mechanical Hand Using Computer Aided Mechanism Design (CAMD) Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Nor Hafiz, Moktarudin (2007) Application Of LDR Sensor On Line Follower Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Sabri, Muhamad Rozaimi (2014) Development of mobile robot controller based on bluetooth communication system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Saufi, Ismail (2015) Design And Analysis Of Speed Limiter Device For A Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Shah Rul, Kamaruddin (2010) Kesan Pengurangan Bunyi Oleh Penyenyap Jenis Reaktif (Diffusing Silencer) Daripada Perubahan Bentuk, Isipadu Dan Offset Paip Masukan Dan Keluaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Yusazlan, Yusof (2014) Two-link musculoskeletal structure workspace force control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Yusri , Che Yusoff (2015) The conceptual design and analysis of used cooking oil filtration process for bio lubrication application. Project Report. UTeM. (Submitted)

Muhamad Zamri , Sukarman (2009) Ball And Beam Controller Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Zulazhar , Abd Halim (2010) Programmable Mechanically Drum Band. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad, Khairol Ridwan (2016) Development Of Fogging Robot By Using Arduino UNO And HC-05 Bluetooth Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad, Nor Salim and Jenal, Ruztamreen and Ismail, Mohamad Pauzi and Hamzah, Khaidzir (2018) Guided Wave Propagation For Inspection Of Residual Thickness Over Defects. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Abdul Hadi, Che Ali (2015) Temperature Control Using Peltier For Cooling The Apparatus Of Lightning Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afandi, Darwis (2012) Design And Development Of Pneumatic Mini Disc Oil Palm Fruit Stalk Cutter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afiq, Muhamad Fauzi (2011) Design Improvement Of The Existing Car Jack Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afiq, Yusof (2013) Development Of Prototype Sugar Cane Juice Extraction Machine (mechanical). Project Report. UTeM, Melaka. (Submitted)

Muhammad Afiq , Jalaludin (2015) Design and analyze of flywheel plate for flywheel hybrid module. Project Report. UTeM. (Submitted)

Muhammad Afiq , Zulkifli (2007) Design For Robot Welding Rotation Jig With Workspace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aiman, Jamal Mohamed (2013) Home Controlling System By Using Voice Recognition (Via ZigBee). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aiman , Abd Nasir (2015) Design and analysis of shaft and housing for flywheel hybrid module. Project Report. UTeM. (Submitted)

Muhammad Aimi, Abu Hassan (2013) Application Of AHP Method In The Design Of Remanufacturing Improvement Processes For Crankshaft. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aisamuddin, Idris (2015) Effects of abrasive on ceramic tile cutting process using abrasive water jet machine (AWJ). Project Report. UTeM. (Submitted)

Muhammad Aizat, Ariffin (2009) Automatic Flap And Extend Cloth Lines. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Alif Ridzuan, Rashid (2013) Energy Management For Hybrid PV-Wind System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aliuddin, Ahmad Alwi (2015) Wearable Hand Gesture Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Amirul Asyraf, Zoolkipli (2012) Path Tracking Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Amzari, Najmi (2009) Portable Honey Orange Fruit Grade Sorter Machine (Human Machine Interface Design). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Arif, Pazil (2012) A Designation Of Hardware For Tour Guide Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Arif, W. Deraman (2009) Development Of Duo-Control DC Motor Pick And Place Robot With PIC16F877A Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Arshad, Mohtar (2015) Membangunkan Sistem Bagi Mengangkat Tempat Duduk Tandas Menggunakan Hidraulik Air. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ashraf, Shukor (2007) Analysis Of Earth Fault Relay. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asyraf, Badaruddin (2011) Merlin Miabot Pro Robot Soccer (2 Wheels). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aufa , Mohd Uzir (2013) Modular Design Of Fourth Generation For Fire Fighting Ground Vehicle. Project Report. UTeM, Melaka. (Submitted)

Muhammad Azfar, Amree (2015) Development Of A Dryer Food Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Azfar , Abdullah (2009) Study On Deep Cavity Machining Using EDM Die Sinking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Azri, Othman (2008) Design And Development Of Autonomous Line Tracking Robot Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Azuan, Fauzan Punijan (2010) Analisis Minyak Pelincir Baru Untuk Kereta Dengan Menggunakan Four-Ball Tester. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fahmi, Yusof (2015) Development Of Vacuum Cleaner Robot Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fahmi , Miskon and Ahmad Zaki, Shukor and Nurilyana, Apandi (2010) Gyroscope Integrated Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiq, Shaf'ii (2008) Kajian Rekabentuk Penyenyap Jenis Serapan (Absorption Silencer) Untuk Mengurangkan Kebisingan Enjin Dua Lejang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz, Pungot (2015) PID Control Tuning Using Cuckoo Search For Multi-Input Multi-Output Coupled Tank System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz , Othman (2013) The design and fabrication of hydraulic boom trainer with gripper attachment. Project Report. UTeM, Melaka. (Submitted)

Muhammad Faiz Najmi , Ramli (2009) Energy Studies On Commercial Building In FKE, UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faizh , Sazali (2013) Effects Of Cutting Parameter On Machining Performance For Wood-Plastic Composite Material. Project Report. UTeM, Melaka. (Submitted)

Muhammad Faqrul Reduan , Abdul Majid (2013) Novel EDM Thread Whirling Technique For Orthopedic Medical Screw Implant Application. Project Report. UTeM, Melaka. (Submitted)

Muhammad Farhan, Abdul Latif (2010) Development Of Fuzzy Logic Temperature Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Farid Anwar , Mohd Shukri (2015) Study on the effectiveness of bicycle tire to suppress road transmitted vibration. Project Report. UTeM. (Submitted)

Muhammad Faruz, Abu Bakar (2005) Application Of Hydraulic Transmission For Propulsion Of Forklift. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fassirin, Ismail (2015) The Study Of Air Flow Behaviour With Various Speed And Angle Towards Bicycle Helmet Design Aerodynamicity Through CFD Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaouse , Khalib (2007) Design And Implementation Of Colour Detection Mobile Robot Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus, Zainal (2015) Robotic arm and conveyor controller. Project Report. UTeM. (Submitted)

Muhammad Firdaus , Adnan (2007) Control Design For Ball Sorter Machine Using Grafcet (Software Programming). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haffizzuddin, Ammin Sabda (2012) Merekabentuk Dan Fabrikasi Pengutip Bola Golf Konsep Hijau. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haffizzuddin Ammin, Sabda (2012) Merekabentuk Dan Fabrikasi Pengutip Bola Golf Konsep Hijau. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafiz, Samsudin (2013) Fabrication And Analysis Of Joining Parts For Oil And Gas Piping System. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hafizuddin, Che Harun (2012) Mereka Bentuk Galah Pemetik Dan Pemotong Buah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hanafi, Abd Rahman (2014) Internet Based Car Warning System With Smart Phone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hanafi, Mujtahidin (2015) The Development Of Small Scale Hydroponic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Harith, Mohsin (2015) Development Of Mobile Robot Control By Android Via Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haziq, Abidin (2010) Effect Of Air Velocity And Moisture Content On Solid Waste Combustion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haziq, Ahmad Din (2015) Development Of Blind Person Tools By Using Ultrasonic Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hidayat, Suhaimi (2008) Portable Dragon Fruit Grade Sorter Sensor And Automation Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hidham , Haris (2009) Development Of Monitoring System From A Temperature Data Collector. Project Report. UTeM, Melaka. (Submitted)

Muhammad Ihsanuddin, Hai Hom (2007) Robot Humanoid CS8 (Pinggang Fleksibel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Iswan , Ismail (2008) Study Of Sharp Corner Cutting In Wire EDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izzat, Ab Halim (2012) GUI Development of Solar Energy Flow for Stand Alone System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izzat, Abd Halim (2012) Heat Transfer Characteritic Of An Evaporator With CuO Refrigerant Based Nanofluids As Working Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izzat, Abd. Halim (2012) Heat Transfer Characteristic Of An Evaporator With Cuo Refrigerant Based Nanofluids As Working fluids. Project Report. UTeM, Melaka. (Submitted)

Muhammad Izzat, Ramlan Ross (2010) Design And Analysis Of Intelligent Multiple Gantries System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Jabir , Suleiman (2007) Investigation Of Tool Wear Characteristics For Numerical Control Sculpture (NCS) Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Jazli Aiman, Abd Rahim (2012) PID Controller Design With Different Tuning Methods. Project Report. UTeM, Melaka. (Submitted)

Muhammad Kamil, Abdul Wahab (2015) Automatic car fire extinguister system. Project Report. UTeM. (Submitted)

Muhammad Khalis , Abdul Aziz (2007) Soccer Robot : Score Board System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Khoirudin, Zakaria (2008) Design And Analysis On Mechanical Structure Of Climbing Robot Leg. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Muizz , Mohd Nawawi (2007) Smart Greenhouse Using PIC16F877A Microcontrollers. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Munawwar Hasan , Rohaizan (2009) Assessment Of EDM Parameters On Aluminium 5083. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Muzakkir, Basar @ Sabtu (2013) Home Energy Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Muzzammil , Muhamad Ruzlan (2009) Control Of Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Naim , Haron (2008) Automatic Bottle Labeling System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Najmuddin , Ishak (2007) Sistem Kawalan Ramp Menggunakan PLC. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Nashriq, Mohd Haris (2010) Renewable Energy (Solar Power) Mini Prototype Plant With Scada System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nasir Asadullah , Osman (2007) Autonomous Mobile Robot Navigating Towards A Preset Target : Beacon And Robot Navigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nazri, Sayuti (2007) Knowledge Based Expert System In Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nizam, Kamarudin and Sahazati, Md. Rozali (2010) Estimator And Controller Design For A Didactic Liquid Level System By System Identification Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Noor Rahim , Hashim (2008) Vehicle Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Noor Rahim , Hashim (2008) Vehicle Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nor Afiff, Samiran (2011) Intelligent Robotic Parking System (IRPS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nor Zaini, Sharul Aidy (2015) Modified PID Controller For DC-DC Buck Converter Using Voltage Based PWM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Norpazmil , Che Pa (2010) Design And Prototyping Of Human Following Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nurkhari , Sukimi (2009) Development Of Sensor And Automation System For A Fruit Sorter Machine (Using PLC Keyence). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Qamaruddin, Mohd Ahyan (2015) Process Optimization Of EDM Cutting Process On Tool Steel Using Zinc Coated Electrode Wire. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Qusyairi , Abdul Rahman (2009) CO2 Laser Cutting Of Ceramic Tiles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Rafie Empari, Nurul Nadia (2015) Study on wear rate of TiAIN ball nose during milling inconel 718 under flooded lubrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Rahimi, Ismail (2012) Design And Develop Pool Cleaning Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Rosli Hidayat, Noor Salim (2015) Performance Evaluation Of Nano-Coolant Multi-Walled Nanotube (MWNT) Particles In Ethylene Glycol. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Sabri, Razali (2005) Perlaksanaan Pengawal PID Menggunakan PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Safuan, Abu Seman (2009) DAM Control Using Programmable Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Sayuti, Muhammad Riduan (2019) Neuro – Assisted Exoskeleton For Finger Using Brain Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Shafiee, Ibrahim (2017) Smart auto-collect parcel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Shahimi, Muhammad Shahid Aslami (2019) The Spherical Glass Concentrator On Photovoltaic Module With The Installation Of Dual-Axis Solar Tracking System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Shahril, Abu Bakar (2009) DC Motor Speed Control Using Microcontroller PIC 16F877A. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shahrul Hafizan , Ahmad Fadzil (2010) Design And Analysis Of Proton MPV Bumper Robot Jig. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shaiful, Salleh (2009) Controller Development Of An Automated Press Machine For Disposable Pet Bottle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shalihin, Aris (2012) Off Grid Building System Using Solatube And Wind Energy For Small Scale Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shamil, Mohamed Taib (2015) Wear Analysis Of Common Engine Lubricant In The Market For UTeM Formula Varsity Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Sharmmil Azmi, Hamzah (2015) A Study Of Harvesting Potential Wind Energy Based On Turbulence Effect On The Side Of The Car Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shukri, Kamaruzzaman (2011) Air Shower Cleaning Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shukri, Othman (2009) Reka Bentuk Pembangunan Alat Pengisian Bola Takraw Untuk Pelontar Bola Takraw. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Silmi, Mat Isa (2009) Mini Automatic Cycle Washing Machine Using AT89S51 Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Subri , Zaid (2007) Sistem Kawalan Lampu Isyarat Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, Syed Mohamed and Adi, Saptari (2011) Ergonomic Evaluation on Hand Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, Syed Mohamed and Reduan, Mat Dan and Adi, Saptari and Mohamad Lutfi, Dolhalit (2013) Objective And Subjective Assessments Of Vibrating Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syahir, Mohd Nadzri (2015) Effectiveness Of Corn Oil And Zinc Dialkyldithiophosphate (ZDDP) As Antioxidant In Four Stroke Motorcycle Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syahmi, Mohd Hasan (2011) Development Of Navigation Mobile Robot Based On Digital Compass. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syamil, Zaini (2012) Automatic Throttle Body Control Using Pid Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syazwan Fahmi, Romli (2015) Evaluation Of Energy Usage From Palm Oil Mill Industry Using Cleaner Production Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syukri, Md Salleh (2015) Enhancement Of Control System Using HMI For MAP204. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yusran, Muhaiyuddin (2015) Development Of A Prototype For Solar Powered Smart Water Waste Unit (Overall Structure). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yusri Fadzli , Yusoff (2010) Mekanisme Pencuci Untuk Mencuci Kotoran Pada Batang Tebu Untuk Peniaga Air Tebu Kecilan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zailan, Zaima Syafiqah (2018) Design and analysis of an underwater propeller blade. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Zaki, Muhammad Asyraf Hakim (2016) Automotive Front Grille Energy Harvesting Using Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zhafran, Mohaiyiddin (2007) Development of Material Handling System in Laser Cutting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zubir, Omar (2010) Automatic Control Room Temperature. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zul Azren, Silam (2015) Vision Based Maze Navigation Using Ni-myRIO. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zul Fikri, Suhaimi (2015) The Analysis Of Fluid Structure Interaction For Submersible Water-Hydraulic Manipulator Using Computational Fluid Dynamics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zul Iqbal, Che Ismail (2015) Design And Maintenance Of Mantle Crusher. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zulfadhli, Kamaruzaman (2014) Design and development of trajectory for lower limb assistive device using contralateral limb motion. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Zulfadhli Akmal, Subari (2012) An Application Of Tour Guide Robot Via Shape Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zulfattah, Zakaria (2014) Development Of Future Model Of Concentrating Solar Tower (CST) In Tropical Climate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad azhari, Ismail (2005) The Evaluation Of Machinability And Surface Finish In Wire Cut - Electro Discharge Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Akmal, Shamsudin (2007) Automatic Blocking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Amran, Abdullah (2007) Design And Development Of Car Gear Knob For Mass Customization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Ihsan Izzat , Rosli (2009) Self Diagnosis (Smart) Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Khairul Ikhwan, Muhd Atan (2007) Process Design For Mass Manufacturing Of Powder Formed Solid Fuel From Dried Fibrous Garden Leaves. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Lokhman, Che Ab Rahman (2007) Membangunkan Sistem Pengepam Air Untuk Mini Dandang Yang Menggunakan Kayu Sebagai Bahan Bakar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Ridhwan , Said (2007) Development Of Automated Height Measurement System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhd Safwan, Abdul Satar (2009) Control Of A Real Inverted Pendulum Systems Using Statefeedback Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Shamil Iqram , Razali (2015) Design and analyze the transmission system for flywheel hybrid module. Project Report. UTeM. (Submitted)

Munaliza , Musa (2007) Dancing Robot (Software). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muris, Juliues (2016) Real-time robot arm control using leap motion sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Murni Baizura, Azmi (2010) Sistem Lampu Isyarat Pintar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Murni Baizura , Azmi (2010) Sistem Lampu Isyarat Pintar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa, Muhamad Aqmal (2019) Analysis of shape recognition using robotic fingers by image processing technique for object manipulation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Musa , Yusuf Lada (2008) Grid Tracking For Mobile Robot Navigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musanib, Muzamir (2016) Qualitative Analysis Of Lubricant Oil From Fishing Boat Around Strait Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musli, Muhammad Fadzlan Farhan (2016) Tribological Properties Improvement Of Zinc Induced Canola Oil Bio-Lubricant With Addition Of Molybdenum Dthio Phosphate (MoDTP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musli , Muhtaram (2009) Design Of Air-Conditioner Controller For An Automation. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muslim , Wan Harun (2007) Motion Card Simulation For Master Slave Robot For Painting Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa, Zamir (2012) Development Of Submerge Pump Experimental Rig To Measure Pump Performance For Educational Experimentation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa, Ahmad Fahim (2015) Design and development of an automated window climbing robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mustafa, Ahmad Hafizzuddin (2019) Automatic Portable Sheet Cutter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mustafa, Siti Sara (2015) Effect of cutting parameter on surface roughness titanium alloy (Ti-6AI-4V) with drilling process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mustafa Kamal, Nurshafiqah Nabilah (2019) Development Of Neuro-Control Powered Wheelchair System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mustafah, Muhammad Ameer Khan (2019) Design And Analysis Of IoT-Based Wireless Healthcare Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapha, Mohd Nazreen Izuan (2016) Incorporating Flywheel Hybrid Module In Automobile : A Comceptual Design Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustar Redi, Muhammad Syaamil (2019) Smart Traffic Control System For Ambulance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Musthafah, Mohd. Tahir and Muhammad Zahir, Hassan and Noreffendy, Tamaldin and Safarudin Gazali, Herawan (2013) Design and Analyze Possible Energy for a Heat Recovery System in Passenger Car Engine Compartment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musthafah, Mohd Tahir and Yusmady, Mohamed Arifin and Safarudin Gazali , Herawan and Muhammad Zahir, Hassan and Mohd Azli , Salim and Muhamad Syahir, Ali and Abdul Muhaimin , Mohd Shafie (2012) Design And Setup Of Low Cost Small Engine Dynamometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muthukumar, Kanimohly (2019) The Development Of Web Based Online Parking Reservation System For Android. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muzafar, Selamad (2007) Rekabentuk PLC Berdasarkan Sistem Kawalan Proses. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muzaffar, Mohamad (2013) Mini Spy Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muzaini Azrul , Mukhtar (2006) Robotic Development Using LeJOS Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Nadzeri, Muhammad Amirul Fahmi (2015) Tool wear of carbide cutting tools when machining aluminum alloy 2024 under dry and wet condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nadzri, Muhamad Naqib (2016) Oxidation Stability Comparison Between Zinc Dialkyldithiophosphate And Zinc Diamyldithiocarbamate Induced Palm Oil Biolubricants. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Naim, Saim (2005) A Study On Entry Temperature And Aerodynamics Loading For Increased Performance Of Gas Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Naim, Mohamad Asyraf (2017) Analysis of the centrifugal blower performance with different dimension configuration by using ANSYS software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Najmi Azfar, Mohd Rosli (2009) Electric Car Voltage Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nanthakumar , Munisamy (2010) Smart Cage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Narindra Mohan Kumar, Sarveen (2024) Design and implementation of a smart solar tracker using Arduino for enhanced energy efficiency. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nasir, Nurfarahin (2015) Design Optimization Of Solar Pumping Water Filter For Sustainable And Water Quality Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasri, Syaiful Syhwan (2016) Controller Using Optimization Technique For An Electro-Hydraulic Actuator System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nasri, Syaiful Syhwan (2016) Controller using optimization technique for an electro-hydraulic actuator system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nasrul Hisyam , Sulong (2009) Automatic Fish Feeder Controlled By Programmable Logic Controller (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Natasha, Musa (2008) An Experimental Study Of Material Property (Hardness) Parameter For Surface Grinding Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nattni, Ainim (2013) Developing Accelerometer Sensor System For Instantaneous Mapping Acceleration Of 1DOF Elbow Joint For Exoskeleton Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nawai , Langar (2007) Wall Follower Mobile Robot Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazamuddin , Yusuf (2015) Design and development of a spherical robot. Project Report. UTeM. (Submitted)

Nazari, Mohd Faiz (2017) Design,Analysis And Development Oil Palm Loose Fruits Collector Device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nazir, Rabiatul Adawiyah (2024) Establishment of autonomous maintenance programme to enhance efficiency of milling machines. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nazreen Nadia , Mohamed Shamaun (2006) Personal Communicator : Personal Medical Assistant /Care. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nazri, Muhammad Safwan (2017) Developing Quails Egg Boiling & Peeling Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ne'mat, Muhammad Najib Faiz (2016) The Effectiveness Of Using Phase Change Material (PCM) In Reducing Car Interior Temperature During Day-Time. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Li Ching (2008) Development Of Self-Parking Car. Project Report. UTeM, Melaka. (Submitted)

Ng, Shirley Hwee Sun (2008) Design And Performance Study Of A Centrifugal Compressor Used In Helicopter Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Angie (2020) Conceptual design of a kitchen food waste composter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Ann Qi (2018) The development of underwater manipulator for mini-rov application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Chin Yong (2016) Development Of A Mobile Robot For Night Vision Assistive System. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Ng, Cho Liang (2015) Scaled control of DC motors. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Chok Tong (2018) Development And Experimental Study Of Electronic Water Boat For Education Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Fong Ee (2016) Personal Communicator : Personal Medical Assistance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Jack Kii (2016) Sensor Based Collision Avoidance Manipulator. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Ng, Ke Voon (2012) Sit To Stand Motion Algorithm Of Nao Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Ken Hou (2011) Modeling Of Hydro Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Kong Eng (2017) Investigation On Compressor Blade’s Profile Performance By Using 3D CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Lea Boon (2014) Improved Car Park Control Center. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Qi Mun (2016) Design of manual milling operation workstation for product dimensional accuracy and safe posture. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Shea Cheing (2015) Development Of A Prototype For Solar Powered Smart Water Waste Unit (Machine Elements). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Simpson (2017) Development Of Remotely Operated Trash Cleaning Robot For River Cleaning Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Sze Ling (2013) Design And Simulation Of Three Dimensional Bending Machine. Project Report. UTeM, Melaka. (Submitted)

Ng, Wei Yu (2017) Design and development of small size animatronics robot mechanical construction. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Yean Kit (2016) A TRIZ approach to reduce unscheduled downtime in semiconductor industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Zhen Quan (2017) Gamelan Bonang Electromagnetic Based High Torque Knocking Mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng , Siew Wan (2009) Development Of The Audit Energy Software For Office Building By Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng , Chor Liang (2008) Development Of A Semi-Automated Material Handling System For Laser Cutting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng , Thian Loon (2009) PC-Based Power Failure Monitoring With SMS Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, , Wei Tat (2013) The evaluation of machinability and surface roughness in conventional milling machine. Project Report. UTeM, Melaka. (Submitted)

Nicholas, Cyril Donovan (2010) Surface Roughness Analysis Versus Depth Of Cut In CNC Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nicholas, Su Shyn Sern (2009) Autonomous Robot Following Human (Vision Part). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nidzwan , Nosbi (2005) Study Of Sharp Corner In Wire EDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Hakimi , Nik Abdul Halim (2009) Intellegent Master Slave Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Jom , Eh Kan (2007) Smart Trash Can. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Hafiz, Mohd Nawi (2009) Vacuum Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Hazizullah, Abdul Ghani (2009) Design And Development of Multifuntion Jig And Fixtures For Press Rivet Clutch Used In Motorcycle Engine Assembly-A Case Study On HICOM YAMAHA Manufacturing Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Muhammad Faiz, Mustaffar Bakri (2012) Kajian ke Atas Kecekapan Menara Penyejukan Dengan Percampuran Bahan Kimia Etilena Glikol Ke Dalam Cecair Ejen Penyejukan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Nazehan , Nik Omar (2007) Design And Implementation Of Alarm System By Using Microcontroller (AT89S51-33P). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Nurfathi Nadia, Nik Mustaffa (2012) Tool Wear Prediction By Measuring Cutting Force. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Rus Khuzaimah , Nik Azizan (2007) Mobile Robot Monitoring System Using LEGO Mindstorms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Shamila , Nik Shafie (2008) An Experimental Study Of The Impact Of Surface Grinding Parameter On Flatness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Zuraifah , Nik Mohamed (2007) A PIC-Based Temperature Alarm. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noor 'Ein, Abdullah (2015) The automated monitoring robot (MOBOT). Project Report. UTeM. (Submitted)

Noor Asekin, Md Yasukin (2015) Energy And Thermal Comfort Analysis For Air Conditioning And Ventilation System In Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Ashikin , Othman (2007) Autonomous Mobile Robot Navigating Towards A Preset Target. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azam, Alias (2006) Two-Wheeled Balancing Robot Locomotion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azam, Muhammad Nur Asyraf (2024) Effect of EDM wire cut waste in short fiber on mechanical properties of laminated glass composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Noor Azhar , Mohd Yusof (2015) SMART E-Ticketing system using QR code (SEQR). Project Report. UTeM. (Submitted)

Noor Aziana, Abu Taib (2007) Real Time Clock Display By Using Programming Language Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azizi, Noor Syazwan (2016) Development Of Robot Following Human Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azli, Mohd Baharden (2010) Library Assistant Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azman, Farah Norhasnani (2017) Investigation of vegetable oil based nanofluid in turning D2 steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Noor Faezah, Hamdi (2005) The Temperature Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Fareeza , Amran Samsudin (2013) Simulation Design On Water Level Control System. Project Report. UTeM, Melaka. (Submitted)

Noor Fatiha, Omar (2014) Dynamic modeling of a double-pendulum gantry crane system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Noor Haryani, Mohd Dom (2006) Sistem Kehadiran Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Hasriq, Mohammad (2012) Konsistensi Penjana Titisan Dalam Menghasilkan Saiz Dan Selang Masa Titisan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Haznil Ikmal , Abdul Jalil (2010) Feedrates Optimization And In Ball End Milling Of Mild Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)