Design Of Water Level Activated Alarm System For House Water Tank

Mohd Hafieni , Md Yakim (2009) Design Of Water Level Activated Alarm System For House Water Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Design_Of_Water_Level_Activated_Alarm_System_For_House_Water_Tank_-_TJ213_.M42_2009.pdf - Submitted Version Download (149kB)
	PDF (Full Text) Design_Of_Water_Level_Activated_Alarm_System_For_House_Water_Tank_-_TJ213_.M42_2009.pdf - Submitted Version Restricted to Registered users only Download (4MB)

Abstract

This project is inspired to monitor and detect water level when the water filled up in house water tank. When water is filled up with the house water tank, water level must be determined. So, this project is required to design and implement a circuit that detects water level and shows by numbers of the LED and the alarm will function when the water is filled up with the house water tank. The project circuit is also included the specific conductivity mechanism that would show the levels of different numbers of LED when the water is filled up with the house water tank. The specific conductivity varies with temperature, volume and separation distance of the measurement probes. Normally, water tap has a conductance of about 50 uS /cm and 20K Ohm / cm at 25 ° C. The circuit is drawn out as a block diagram, and then entered in a schematic using MULTISIM to simulate for correct functionality. Once the circuit is performed accurately in testing it will be assembled with the actual components on a breadboard and will be verified using laboratory equipment.

Actions (login required)

View Item