Design Of Daylight Intensity Detecor For Power System

Mohd Azrul , Abdul Talib (2009) Design Of Daylight Intensity Detecor For Power System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) Design_Of_Automatic_Daylight_Intensity_Detector_For_Power_System__TK4386_.M39_2009.pdf - Submitted Version Download (345kB)
	PDF (Full Text) Design_Of_Automatic_Daylight_Intensity_Detector_For_Power_System__TK4386_.M39_2009.pdf - Submitted Version Restricted to Registered users only Download (3MB)

Abstract

The aim of this project was to design an automatic daylight intensity detector for power system (electrical appliance). This project is able to detect the daylight intensity and activate the fluorescent light circuit automatically. The software for this project was designed by using Visual Basic 6.0 program to read the value of daylight intensity detected by light meter and activate the lighting system of fluorescent light. This automatic daylight intensity detector will detect the sunlight intensity detector and the software will read the detected value. After that, the designed software will compare the value between the detected values and setting value to operate the lighting system. The system will activate the lighting system if the detection value is lower than the setting value. Meanwhile that, the system will deactivate the lighting system if the detected value is higher than the setting value. This system uses an interface circuit to operate the lighting system and use parallel port to link between the computer and the lighting circuit. The lighting will be activated when there are signals transferred from the computer through this parallel port.

Actions (login required)

View Item