The Holder Of Thermoelectric Power Generator (TEG) Based Hi-Z Thermoelectric Modules

Muhammad Muslim , Mustaffa (2010) The Holder Of Thermoelectric Power Generator (TEG) Based Hi-Z Thermoelectric Modules. Project Report. UTeM, Melaka,Malaysia. (Submitted)

	PDF (24 Pages) The_Holder_Of_Thermoelectric_Power_Generator_(_TEG_)_Based_Hi-Z_Thermoelectric_Modules_Muhammad_Muslim_Bin_Mustaffa_TK2950.M58_2010_-_24_Pages.pdf - Submitted Version Download (962kB)
	PDF (Full Text) The_Holder_Of_Thermoelectric_Power_Generator_(_TEG_)_Based_Hi-Z_Thermoelectric_Modules_Muhammad_Muslim_Bin_Mustaffa_TK2950.M58_2010.pdf - Submitted Version Restricted to Registered users only Download (7MB)

Abstract

Thermoelectric power generator (TEG) is a device that can convert heat directly to electricity. This project aims to produce the holder that can hold TEG in the decided position. In this research, the finding of the best location was done before designing the holder of TEG take place. There are few aspects which will be considered during choosing the best location of TEG. After deciding the location to place the holder, there are few conceptual design of TEG. One conceptual design was selected and detail drawing for the holder had been produced. The material for the holder will be analyzed to make sure the holder can hold the TEG safely. The material selection for the holder is based on the yield strength and tensile strength of the material. After the material for the holder has been selected, analysis of the holder using SolidWork will be done to get the value of maximum normal stress and minimum factor of safety. After the analysis in defining the maximum normal stress and minimum factor of safety has been done, the best material to fabricate the holder can be defined.

Actions (login required)

View Item