Minkowski Fractal Patch Antenna With Rhombus Split Ring Resonator

Ramlee, Nur Ezzatul Shahira (2018) Minkowski Fractal Patch Antenna With Rhombus Split Ring Resonator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Text (24 Pages) Minkowski Fractal Patch Antenna With Rhombus Split Ring Resonator.pdf - Submitted Version Download (327kB)

Abstract

This project about the demands of the multiband antenna that can operate in many frequency ranges is highly in the telecommunication sector. A few new techniques combine to enhance the performance of the antenna and to miniaturize the patch antenna size such as use microstrip patch antenna, apply fractal geometry shape at antenna design and adds split ring resonator at antenna design. This is to cater the high demand of user nowadays, especially on WLAN and WiMAX. The problems usually faced by researchers are microstrip antenna is large antenna size and only can operate at only single band. The main objective of this project is to design, simulate, fabricate, measure and analyses antenna design using VNA Network Analyzer. This project will divide into two parts which are software and hardware. The important data will be collected from the literature review and transfer into CST software. Then, it will be designed and simulated. After that, antenna design will be fabricated on PCB board by using PCB machine and it will be tested using VNA Network Analyzer. The measured result and simulated result will be analyzed. The simulation result of this antenna are 2.4377 GHz, 2.7797 GHz and 5.4014 GHz with the return loss of -16.035 dB, -10.377 dB and -17.610 dB. At the end of this project, it is expected that the size of the patch antenna is reduced and this antenna was operating in multiband frequency at 2.4GHz and 5.5GHz.

Actions (login required)

View Item