FTK Emergency Light Monitoring System Using Wifi

Jamaludin, Muhammad Luqman (2016) FTK Emergency Light Monitoring System Using Wifi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Text FTK Emergency Light Monitoring System Using Wifi 24 Pages.pdf - Submitted Version Download (1MB)

Abstract

The Emergency lighting facilities are usually installed in public areas such as offices, industrial, etc. Based on building safety regulations contained in the nation, this facility should be installed and checked regularly to make sure the lights under normal conditions. Basically, the task of checking and maintenance undertaken by human only and usually takes around 30 minutes for each device. In the traditional emergency light systems, the common internal damage an effect and repaired by maintenance workers. For example battery overcharging, lighting problem or led not function and so on damage. In order to ensure the emergency light level in good condition, the emergency system needs to operate with high reliability. This system needs to be independent or capable to test themselves, display internal damages and check their functional state. With the improvement of the new features in security systems, at the same time, maintenance costs will be reduced. The hardware section consists of smart phones as the controlling device, the power supply module and the control module. By using the Wi-Fi module of node mcu, which is allowing an electronic device to exchange data or connects with Arduino through transmit and received a pin (Tx and Rx). An emergency light functioning to monitor and give status condition of lamp during maintenances using the wifi device and easy to monitor for security or server room. The transmitter of Node MCU Wi-Fi module and transmit the data given by the emergency light. This system concept, the user can check anytime the conditions of emergency light if have a problem or not by using computer and smart phone. The node MCU will display IP Address for every light as identity part number and then display at webserver (HTTP). So that can save money, energy and time. Furthermore, this system maintenance became more systematic.

Actions (login required)

View Item