Items where Year is 2019

A

A Sulaiman, Noor Anisah (2019) Drive Right: Driving Simulation To Alert The Driver Using Artificial Intelligence For Prudential Driving Behaviour. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

A. Rahim, Nor Atikah (2019) Entrepreneur profiling of Malaysian small business in Peninsular Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab Ghani, Ahmad Raihan (2019) Hybrid Pi And Fuzzy Logic Speed Controller Strategy For Induction Motor Drive. Project Report. Faculty of Electrical Engineering, Melaka, Malaysia. (Submitted)

Ab Hadi, Mohd Haizal Syafiq (2019) The Factors Of Customer Purchase Intention Toward Halal Cosmetics In Malacca. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab Hamid, Ahmad Akram (2019) Improvement Aerodynamic Design For C-Segment Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Latib, Nurul Shafika (2019) The Impact Of Work Motivation, Competency, Personality And Training Towards Employee Performance At Pet Far Eastern (M) Sdn. Bhd. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab Wahab, Muhammad Tarmizi (2019) Design And Fabrication Of Oil-Water Separation System With Hydrophobic Coating Wire Mesh Filter For Grease Trap. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab. Hadi, Ahmad Syukran (2019) Automated paper cutter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab. Rahim, Muhammad Ashraf (2019) Tribological Studies On Ultra High Molecular Weight Polyethylene With Palm Kernel Shell In Dry Condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abas, Siti Attiyah Namira (2019) The relationship between works motivation and job performance in small-medium food and beverage enterprise at Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Azis, Muhammad Taufiq (2019) A Project On Ball And Concave Jig Attachment For Lathe. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Ghani, Anis Aqilah (2019) Optimization Of Processing Parameters To Maximize The Physical And Mechanical Properties Of Natural Rubber Composites For Engine Mount. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Jalil, Muhammad Aiman (2019) Performance Analysis Of Microwave Imaging System For Different Microwave Sensors. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Latif, Muhammad Anas (2019) Design And Development Of Injection Mold For Plastic Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Manaf, Muhammad Fazli (2019) Design And Development Of Silk Screen Printing Machine For SME Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Muhamad Amirul Syukri (2019) Development Of Parking Information System By Using IoT Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Abdul Muiz (2019) Development Of Smart Irrigation System Using LORA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Nor Nabilah (2019) Design And Development Of Automated Wire Cutter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rashid, Mohd Ariff (2019) Developement Of Rice Treatment Method Towards Ankle Sprain Syndrome. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rashid, Nurul Syahfiqah (2019) Development Of Remote Terminal Unit (RTU) For Power Quality Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Razak, Muhammad Shaharuddin (2019) Patch Antenna By Using Defected Ground Structure For 5G Mobile Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Samad, Mohd Adha (2019) Design And Improvement Emergency Brake System For Motorcycle Under 150cc. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Wahab, Mohd Syafiq (2019) Grasping Motion Control Of A Robotic Hand Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Wahab, Muhammad Nazirul (2019) Development Of Smartphone Based Autonomous Robot Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Wahid, Mohamad Nabil Aiman (2019) Development Of IoT Conservatory Monitoring And Control System For Rock Melon Farm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd.Razak, Nur Fazira (2019) Factors Affecting Adoption Of E-Wallet Among Public University Students In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Tamaldin, Noreffendy and Mat Tahir, Noor Ayuma (2019) Synthesis Of Grapheme Film From Palm Kernel Activated Carbon Using Chemical Vapor Deposition For Durability Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Amin, Muhammad Harith Aizad (2019) Development Of Waste Heat Recovery Unit For Passenger Car By Using Thermoelecric Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Ahmad Kamal (2019) Effectiveness of social media as a business platform for SMEs in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nurul Hidayah (2019) Effect Of Sintering Temperature And Soaking Time On Microstructure And Mechanical Properties Of Alumina-Chromia Cutting Tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Bari, Arif Imran (2019) Design Of Hydrodynamic Body Structure For Autonomous Underwater Vehicle Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Ghafar, Ahmad Mubasyir (2019) Analysis Of Waist-Enlarged Tapers Towards The Performance Of The Single Mode-Multimode Single Mode (SMS) Fiber Optic Sensor For Liquid Temperature Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakim, Nur Raihana (2019) Improvement Of Production Line Flexibility Through Rapid Changeover Via Time Reduction Of Internal Activities. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Amiera Husna (2019) Conversion Of Jatropha Curcas Oil To Biodiesel Using Heterogeneous Catalyst Via Microwave Irradiation Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Harith Hilman (2019) Thermal And Mechanical Properties Of Thermoplastic Cassava Starch/Beeswax Reinforced With Cogon Grass Fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Hilmi (2019) Mobile Locking System For Home Security. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Mohamad Hafizuddin (2019) Development Of IoT Based Smart Auto Gate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Muhammad Firdaus (2019) Improvement Of Hygienic Urinal System Using Integrated Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Tiara Natasya (2019) Voltage Based Coordinating Controller Modelling And Performance Analysis For Islanded Renewable Energy System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Abdul Muaz (2019) Liquid Level Controller System Without Contact. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Muhammad Aminudden (2019) Design And Fabrication Three-Wheels Electrical Balancing Scooter For Disable Person. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Nur Syahirah (2019) Factors Influence Purchase Decision Of Halal Food Among Non-Muslim In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Nurul Athirah (2019) Development Of Machine Element Of Teaching Aid For Secondary School. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Kadir, Mohd Hakim Naqiuddin (2019) Development Of Third Brake Light And Signal System For Motorcycle Helmet. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Kadir, Muhamad Syazwan (2019) Position Control Of Electro-Hydraulic System Using PID-MRAC Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Kadir, Muhammad Afiq (2019) The development of a smart plant monitoring system using IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Latif, Mohd Faruq and Aziz, Azwan and Zahmani, Qamar Fairuz and Hashim, Muhammed Noor and Ali, Adlan and Nordin, Abd Khahar and Harun, Mohamad Hafiz (2019) Automated Carpet Washing Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Latiff, Nurain (2019) Design Web Based For Monitoring In Online Probrand Clothing Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latiff, Syafiq (2019) Effect Of Micro Drillng Parameters On Thrust Force In Micro Drilling Of CFRP Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latip, Shekh Faisal and Abu, Nor Azman and Ahmad, Rabiah and Hussin, Burairah and Z'aba, Muhammad Reza and Zainal Abidin, Zaheera (2019) Improved Techniques For Cryptanalysis Of Lightweight Block Ciphers Using Statistical, Algebraic And Side-Channel Methods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Majid, Nur Nazirah (2019) An Analysis Of The Application Of Soccer League Competition (SLC) In Solving Route Planning Problem In Holes Drilling Process Of The Printed Circuit Board (PCB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Malek, Mas Nurul Najihah (2019) Capacitive Power Transfer System For Aquarium Apparatus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Manaf, Noor Asyiqin (2019) A study on the impact of customer satisfaction on customer loyalty towards fast food restaurant in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Manan, Aida Adira (2019) Factors Affecting The Puplic Acceptance Towards Waste Separation At Household Level. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Najib, Norhazwani (2019) Design New Mechanism Of Safety Triangle For Motorcycle Under 150 Cc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Nasir, Muhammad Nafis (2019) Thermal Distribution Of Copper Electrode Post-Plasma Discharge In Air At Atmospheric Pressure By Using Microwave. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Nurul Najihah (2019) The Factors On Green Information System Adoption Towards Electronic Industry In Malacca. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Raha (2019) Aluan UFiS 2.0. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Aspirasi UTeM Bersama Naib Canselor 2019. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Chancellors Talk UTeM DS Zaini Ujang. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Chancellors Talk UTeM TS Abdul Wahid Omar. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Closing Ceremony Mechanical Engineering Research Day 2019 (MERD’19). [Speech] (Submitted)

Abdul Rahim, Raha (2019) International Conference On Smart Community & Industry (ICSCI) 2019. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Jamuan Hari Raya Anjuran FTKEE & FTKMP. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Karnival & Persidangan E-Pembelajaran UTeM 2019 (ELCC2019). [Speech] (Submitted)

Abdul Rahim, Raha (2019) Lawatan Nc Ke Pejabat PNC PPF Fan Lawatan Kampus UTeM. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Apresiasi Penerbitan UTeM 2019. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Konvokesyen Ke 15 UTeM (Sesi 1). [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Konvokesyen Ke 15 UTeM (Sesi 2). [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Konvokesyen Ke 15 UTeM (Sesi 2) Bersama TYT. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Konvokesyen Ke 15 UTeM (Sesi 3). [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Konvokesyen Ke 15 UTeM (Sesi 4). [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Konvokesyen Ke 15 UTeM 3 Disember 2019 (Sesi 3) Bersama TYT. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Konvokesyen Ke 15 UTeM 3 Disember Bersama TYT. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Konvokesyen Universiti Tokushima. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Makan Malam Sempena Bengkel Bibliometric Analysis (MyRMA). [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Menandatangani MOU Antara UTeM dan Tokushima University Japan. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Menandatangani MoU Antara UTeM Dan CRUSK Assembler Sdn Bhd & Genaxis Sdn. Bhd. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Meraikan Bakal Haji. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Pelancaran Kempen ‘Cashless Campus’, UTeM. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Pelancaran Kerjasama Strategik Artikulasi Program Diploma Kemahiran Dan Vokasional Ke Ijazah Sarjana Muda Teknologi & Program Jerayarawa Program Sarjana Muda Teknologi MTUN. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Pelancaran ‘Read@Uni’ Universiti Teknikal Malaysia Melaka. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Penutup Dan Penyampaian Hadiah Kejohanan Sukan Antara Fakulti Kali Ke-14 2019. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Penutup Konvensyen Kumpulan Inovatif Dan Kreatif (KIK) Peringkat Universiti Awam Kali Ke 15 2019. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Penutup Konvensyen Kumpulan Inovatif Dan Kreatif (KIK) Universiti Teknikal Malaysia Melaka Kali Ke 5. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Penutup Microsoft Professional Program Data Science. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Penyematan Pangkat Dan Penyerahan Sijil Pelantikan Komandan Kor SUKSIS UTeM Oleh Ketua Polis Melaka. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Perasmian Higher Education Sports Fest (HESF) 2019. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Perasmian Minggu Haluan Siswa 2019/2020. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Perasmian Penutup & Penyampaian Hadiah Karnival Inovasi UTeMEX 2019. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Perasmian Pesta Konvokesyen UTeM Ke-15 Universiti Teknikal Malaysia Melaka (UTeM). [Speech] (Submitted)

Abdul Rahim, Raha (2019) Majlis Perasmian Program Food Bank Universiti Teknikal Malaysia Melaka (UTeM). [Speech] (Submitted)

Abdul Rahim, Raha (2019) Malam Penghargaan Bersama Media 2019. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Meraikan Kenaikan Pangkat Profesor. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Mesyuarat Post Exco Pendidikan Negeri Melaka. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Misi Kembara Persaudaraan Islam UTeM-Kemboja 2019/14340H. [Speech] (Submitted)

Abdul Rahim, Raha (2019) MoU UTeM – Liverpool John Moores University. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Pembentangan Perancangan Pelan Pembangunan Kampus Induk UTeM Sehingga 2030. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Pembukaan Latihan, Pemakaian Pangkat Dan Hackle Pegawai Kadet Pasukan Latihan Pegawai SimpananTeknologi MTUN. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Perasmian Hari Akademia 2019 Peringkat Universiti Teknikal Malaysia Melaka (UTeM). [Speech] (Submitted)

Abdul Rahim, Raha (2019) Program Continual Quality Improvement Discourse (CQID) 2019. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Program Eksplorasi Citra Patriotik 2019. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Program Gathering Alumni Towards Employability (GATE@UTeM 2019). [Speech] (Submitted)

Abdul Rahim, Raha (2019) Program Hi-Tea Dan Penutup Hari Akademia 2019 Peringkat Universiti Teknikal Malaysia Melaka (UTeM). [Speech] (Submitted)

Abdul Rahim, Raha (2019) Sempena Majlis Jasamu Dikenang Sejambak Kasih, Sekalung Budi. [Speech] (Submitted)

Abdul Rahim, Raha (2019) Townhall Bersama YBM. [Speech] (Submitted)

Abdul Rahman, Amirul Hazim (2019) Mechanical And Thermal Properties Of Thermoplastic Cassava Starch/Beeswax Reinforced With Sugarcane Bagasse Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Luqman Hakimi (2019) Home Security And Gas Leakage Detection With Surveillance Via IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rasid, Mohd Alif Ashraf (2019) An Investigation Of Car Cabin Temperature Reduction Using Different Number Of Solar Car Ventilator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Afiq (2019) To Study The Heat Insulation From Engine Toward Bus Interior. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razim, Rozieani (2019) Investigating The Effect Of Upper Arm Postures On The Hand Grip Strength Requirement For Female Malaysian Young Adult. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Sahak, Nurhafidz and Md Yusof, Faradila and Salehuddin, Fatonah and Che Hassim, Mohammad Dzulhisham and Rafan, Nur Aidawaty and Mehat, Nurul Akmar and Md Esa, Muhamad Hazrul and Omar, Lela and Zainal Abidin, Aswanzie Abbyd (2019) Ulung Ilmu Meladeni Industri. Penerbit Universiti, Durian Tunggal. ISBN 9789672145868

Abdul Wahab, Muhammad Zikri Hakimi (2019) Development Of In-Cabin Intelligent Safety System Against Carbon Monoxide. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Wahab, Zulfanizam (2019) Development Of Science Project For Sekolah Padang Temu. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdull Azis, Muhammad Zikri (2019) The Development Of Smart Automation System With Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdull Jalil, Amir Shahiran (2019) Tribological Analysis Of Steel Against Steel Contact Under Extreme By Using Different Types Of Anti-Wear And Friction Additives. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nezyla Noorbaizatul Nafisah (2019) Studying Women Entrepreneurship In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nor Atikah (2019) The Acceptance Decision Support System (Communication Driven) Towards SME Performance In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nur Fatin Hanani (2019) Investigation On The Effects Of Electrospinning Distance And Applied Voltage On Morphology Of Poly (Lactic Acid) Electrospun Nanofibres. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu, Ahmad Khuzairi (2019) Design Of Mini Coconut Fiber Crusher And Screening Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Affifuddin (2019) Image Compression Using Discrete Cosine Transform (DCT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Norinni (2019) Investigation Of The Buckling Behaviour Of Axially Compressed Cone With Dimple Imperfection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Hanifah, Amirul (2019) Development And Analysis Of Low-Cost Smart Security And Tracking System For Motorcycle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hasan, Ahmad Amirrudin (2019) The Impact Of Digital Marketing On Sales Performance Among SMEs In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Kamal, Muhammad Azril Hilmi (2019) Design And Develop Intelligent Lighting System Integrated With PV Solar. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Samah, Muhammad Raziq (2019) Stress Analysis On Engine Block Considering Thermal Effect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Zarin, Muhamad Syahmi (2019) Optimization Of Product Architecture By Using Design For Manufacture And Assembly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abullais, Fairil (2019) Simultaneous Assessment System Of Work Posture And Muscle Activity For Manual Materials Handling Tasks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Achuan, Pharawus (2019) The Influence Of Blade Parameters Configurations On The Performance Of Thrust Power For AUV Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adenan, Muhammad Zulfan Amier (2019) Development Of LPG Gas Monitoring By Using MQ6 Sensor To Detect Leakage In The Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Admin, Fatin Nor Suhaina (2019) Factors That Influence Brand Loyalty Towards Cosmetic Products: A Case In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Fatin Atiqah (2019) Improving SMED Process At Milling Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Norsyafiqah (2019) Investigation On Single Fibre Strength From Reclaimed Carbon Fibre (rCF) For Secondary Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Afandi, Muhammad Akif Irfan (2019) Experimentation Of Mode Shape Curvature Algorithm Using Accelerometer For Damage Detection In Aluminium 6061. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ag. Tajudin., Mohd Ilmam (2019) Motion Detection System For Surveillance Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Agus, Mohd Nasip (2019) A Development of Vertical Axis Wind Turbine by using DC Motor As a Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Agus Salim, Muhammad Aizat Afiq (2019) Ergonomic Analysis In Improving The Process Of Assembling Woven Bags. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Aina Syuhada’ (2019) Characterization Of Feedstock Powder With Different Morphology For Plasma Sprayed Titania Coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Faris Afiq (2019) Impact Of Tool Features On The Quality Of Weld In BFSW Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Krishya Nuraqilah (2019) Customer characteristics towards aesthetic product based on emotional design approach (water drinking bottle design). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Farabi (2019) Development of hydro powered energy harvester from water flow rate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Siti Fikriah (2019) The Study Of Flank Wear Using Coated Latuma (ALTiN) Boron Steel (22MNB5) On Aluminium (AA6061). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Faizal, Muhammad Hanafi (2019) System Integration For Mechanism And Test Bed Of Cone Laying System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Fauzi, Muhammad Hanif (2019) Investigation Of Compensation Network Design For Class E Inverter In Ultrasonic Transducer Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fuzi, Hawa (2019) Investigation On Mechanical Properties Of Reclaimed Nonwoven Carbon Fiber Composite For Secondary Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Khairi, Muhammad Irsyad (2019) Ergonomics Evaluation Of Design Studio At FKM UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Lokman Hakim Oh, Muhammad Faris Syauqi (2019) Development Of Semi-Automatic Mushroom Resting-Cap Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Pozi, Nur Aina (2019) An analysis of factors affecting consumer’s attitude towards viral marketing in melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Rafiee, Aina Nazirah (2019) Factors Affecting Online Shopping Of Purchasing Apparels Among Young Adults. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rosali, Muhammad Faizal (2019) Development Of IoT Street Lamp Monitoring System For Lamp Production Factories. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sabri., Nur Amirah Syuhada (2019) The Acceptance Of Green Marketing Mix That Influences Customer Purchase Intention On Green Products. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Sarbaini, Syasya (2019) The Impact Of Storytelling Marketing In Cosmetic Product Towards Consumer Purchase Decision. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Suki, Siti Fairuz (2019) Influence Of Packaging On Consumer Buying Decision In Snack Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaghlul Basha, Fitrah Nur Hidayah (2019) Development Of An Electronic Educational Quiz Board That Test Student Knowledge On Laplace Transform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaghlul Basha, Fitrah Nur Hidayah (2019) Development Of An Electronic Educational Quiz Board That Test Student Knowledge On Laplace Transform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmat, Amin (2019) Portable 3-In-1 Emergency Kits. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmed Nasir, Aizzat Hafizuddin (2019) A Modified PID Controller Design For 3-Phase SPWM Multilevel Inverter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ajid, Abdul Aziz (2019) Design Improvement Of The Heating Oven For Honeycomb Core Forming Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Akasak, Nurul Syazwani (2019) Statistical Analysis Of Repetitive Repair Welding Using GMAW On Stainless Steel Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Albahori, Ainul Asyikin (2019) The Factors Influence Financial Literacy Among Youth Entrepreneurs In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alex, Madi Chung (2019) Wideband Nonlinear Dynamic Vibration Absorber Using Combined Softening And Hardening Stiffness Mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alexander Samuel, Nick Mathews (2019) Development Of 6-Axis Robot Arm For TVET Training. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Afif Danial (2019) Design & Development Of Voice Command Vehicle Turn Signal System For Urban Car Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Mohamed Fikhrie (2019) Dimensional Analysis Of 17 Dof Railway Vehicle Suspension Model. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Nur Shahirah (2019) Tribological Properties Of 3D Printed Acrylonitrile Butadiene Styrene (ABS) Under Dry And Wet Conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Nuratiqah (2019) Temperature Distribution On Liquid Based On Microwave Heating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Siti Nur Wafa (2019) Development Of Roll Pineapple Tart Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alkahari, Mohd Rizal and Ramli, Faiz Redza and Maidin, Shajahan and Sudin, Mohd Nizam and Rosli, Nor Ana (2019) Consolidation Characteristics Of Parts Fabricated Via Open 3D Metal Printing Utilizing A New Integrated Plasma Deposition Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alwi, Nur Shafiqah (2019) The Relationship Between Retention Strategy With Employees Turnover Among McDonald Branch In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alzahari, Muhammad Farid Elyman (2019) The Effect Of Surface Treatment On PALF Reinforced Vinyl Ester Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amil Basah, Suriani (2019) The Factors Of Green Marketing That Affect Consumer Purchase Behaviour Among Young Adults In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminallah, Muhammad Mufqi (2019) Study Of Fiber Loading Effect On Thermal And Rheological Properties Of Bio Composite Fused Filament Fabrication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminuddin, Ahmad Naufal Hakimi (2019) Design Of Mini Plant For Processing Of Compost Fertilizer From Dried Leaves. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Shah, Nurhanani (2019) Comparison Between Double-PID+LQR And LQR Controllers For Rotary Inverted Pendulum. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amran, Muhammad Irfan (2019) Development Of Power Factor And Capacitor Value Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Nur Aneesa (2019) The Role Of Intellectual Property Right (IPR) In Protecting Fashion Industry In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ang, Chee Hang (2019) Design And Development Of Chlorine Control System For Swimming Pool Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ang, Ke Xin (2019) Energy And Economic Assessment Of Using Temperature Controller In Air-Conditioned Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Nadiah (2019) The Effect Of Goal-Setting On Employee’s Motivation: A Case Study Of 5S Implementation Among The Manufacturing Organization In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Nur Faizuan (2019) Fast Charging 48V Charger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Shairazi Akmal (2019) Development Of Aquarium Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Siti Aisyah (2019) The Roles Of Innovative Point Of Purchase Displays In Influencing Consumer Purchase Decision. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arif, Sazelin and Sidek, Safiah and Emran, Nurul Akmar and Sulaiman, Nooraini and Abu Bakar, Nurdinah (2019) A New Model Based On Actor-Network Theory To Enhance The Usage Of Online Halal Certification. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arifin, Asila (2019) The Influence Of Gender On The Entrepreneurial Intentions Among Technical University Students. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arifin, Nizar Fikri (2019) Development Of Ubiquitous Vehicle Tracking System Based On Mobile Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aris, Nurin (2019) Organizational Learning Mechanisms During Advanced Manufacturing Technology Implementation In Aerospace Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arom Karoman, Muhammad Fadzil (2019) Cutting Force Measurement Of Natural Fiber Reinforced Polymer Matrix Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arumugam, Solament (2019) Investigation Of Voltage Of Strained Rubber Sheet Using Strain Gauge-Voltage Measurement System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Asoha, Noraina Fazirah (2019) A study of oil palm Fresh Fruit Bunches (FFB) quality issues case of independent smallholders in Muar, Johor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Asri, Maya Fitriah Aulia (2019) The Impact Of Industrial Revolution 4.0 On Customer Satisfaction In Malaysia's Retail Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Atan, Ali Syahiran (2019) Performance Analysis Of Path Planning Algorithm For Autonomous Mobile Robots. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Attaman, Muhamad Amirul Afif (2019) Design And Analysis Of Hydrophobic Oil Skimmer For Grease Trap System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Muhammad Amin (2019) Design And Development Of A Portable Peanut Skin Remover Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Nik Nur Amiera (2019) Preparation And Characterization Of Nanocellulose Derived From Waste Office Paper Prepared By Acid Hydrolysis Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ayob, Muhammad Hilmi (2019) Development Of Smart Aquaponic System For Eco School Project. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ayup, Muhammad Zulhilmie (2019) Development of autonomous underwater vehicle depth control system by using Raspberry PI. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azahar, Ain Hafizah (2019) Development Of Report Submission Box With Tracking And Monitoring System For Lecturer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azahari, Siti Aishah (2019) Behavioral And Functional Analysis Of SOI Wavelength Selective Element For WDM Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azemi, Mohd Qhaireel (2019) Development Of Low Cost 3-Axis Desktop Router And Plotter Machine For Educational Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhar, Muhammad Aiman (2019) Preparation And Characterization Of PP/rPP Blends At Different Formulation Ratio By Injection Moulding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Muhammad Hazim (2019) A Study Of A Cascaded H-Bridge Multilevel Inverter (CHB-MLI) Performance Based On Particle Swarm Optimisation (PSO) As A Controller. Project Report. UTeM, Melaka. (Submitted)

Azhar, Nur Hazlin (2019) Experimental Analysis On Vibration Energy Regeneration System Using Piezoelectric Sensor For Wideband Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhar, Nurfarahin (2019) Transformational Leadership And Innovative Work Behavior For Melaka Halal Hub Employees The Mediating Role Of Intrapreneurial Competencies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhari, Nur Fatin Haziqah (2019) Analysis On 40 KHz Acoustic Energy Transmission Systems Through Metal Propagation Medium. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Noorazuwen (2019) Development of an IoT-based smart garbage bin system with RFID and GSM module. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aziz, Nurniqmah (2019) Minimization Of Unnecessary Inventory By Using The Application Of Pulling System In Manufacturing Industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizan, Alyssa Nur (2019) Smart Solar-Based Gardening System Using Arduino Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizan, Nurul Sakinah (2019) Impact Behaviour Of Coconut Shell Reinforced Polymer Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azlan, Muhammad Afiq (2019) Design And Development Of Square Hole Digging Ground Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Adriana (2019) The Role Of Support Mechanisms On Product Development Performance Among Tech Start-Ups In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Muhamad Ashraf (2019) Mechanical Properties And Fracture Behaviour Of Green Innovative Glass (GIG) Made From Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhamad Hillmi Nadim (2019) Sound And Vibration Analysis Of Portable Air-Conditioning System Using Peltier Module As Power Source. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Muhammad Kamal (2019) Effect Of Fused Filament Fabrication Process Variables On Mechanical Behavior Of Flax. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Nur Maizatul Alina (2019) The Impacts And Influence Of Post Performance Internship Program For UTeM Undergraduate Students. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Siti Norhaslina (2019) An investigation of business strategies using porter five forces in food industry for SME in Malacca. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman Shah, Muhammad Faridzwan (2019) Development Of Rice Cooker Integrated With Arduino Controller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Azizan (2019) Effect Of Stretchable Conductive Ink Dimensions On Electrical Conductivity. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Nurul Shahirah (2019) Development Of Personal Safety Box Using QR Code And Image Processing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

B

Baba, Muhammad Syahzlan Faizal (2019) Design Evaluation Of Wiper System For Urban Concept Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badaruzaman, Nurul Atikah (2019) Factor Influencing Acceptance Of E-Commerce In Small And Medium-Sized Enterprise In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badek Ruzaman, Badiu Nasrullah (2019) Evaluation Of Electrical Conductivity(EC) For Fertilzer Solution Of Venturi Fertilizer System (VFS) Using Design Of Experiment(DOT) Analysis For Agriculture Fertigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Badrul Azman, Muhamad Syafiq (2019) Analysis Residual Voltage Of Surge Protection Device(SPD) Based On Grounding And Coordination. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Badrul Zaman, Muhammad Ikmal Ezani (2019) Solar Tracking System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bah Hau, Mastura (2019) Factor Influence The Intention To Use Internet A Study Of Rural Communities In Perak. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahari, Faqrul Izzat (2019) An Investigation Of Bearing Faults Using Vibration Meter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahari, Mohamad Zakuwan (2019) Design And Development Of Assistive Device For Tenodesis Rehabilitation People. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharin, Nurulain Syamimi (2019) Development Of Neuro IoT Smart Home Controller Using Artificial Intelligence Network (AIN). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bakar, Amar Zikri (2019) Microwave Effect On Biodiesel Production From Hevea Brasiliensis Using Anadara Granosa Shell. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bakar, Faridzuan (2019) Development Of Zinc Oxide (ZnO) Nanoflower For Electron Transport Material Of Dye-Sensitized Solar Cell. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bakri, Nur Nadiha Tasha (2019) Ergonomics Design Of Walking Chair For Disable Children In Classroom. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Balasubrmaniam, Devendran (2019) Smart Home Patrolling Device With Safety System Using IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baskaran, Dilip Rhaj (2019) Effect Of Ferum Loading On The Properties Of GraphiteCarbon BlackPolypropylene Composite As Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baskaran, Hasvinii (2019) Development Of Real-Time Based Smart Assistance Interfaces Audio Receiver For Blind People By Using Object Recognition Methods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Basri, Nursyafienah (2019) Development Of An Electronic Board Game Of Dam-Haji For Encouraging New Generation To Play Traditional Game. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Basri, Syahrul Zhafri (2019) Study Of Thermal Effect On Viscosity And Surface Tension Of Metalworking Fluids. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Benjamin, Nun Hazirah (2019) Smart cart with auto billing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bernabas, Kesavan (2019) New Design Of Knee Locking System For Knee Support Health Device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bernard, Joe Baxter (2019) Development Of Vehicle Plate Number And Identity Card Recognition For Guard House Using OpenCV. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Borhan, Muhammad Sauffi (2019) Research Of Magnetic Shock Absorber With Using Spring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bukhari, Noor Athirah Najihah (2019) The Determinants Of Travel Package Purchase Decision At The Matta Fair. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Chan, Albert Bao Der (2019) Design And Develop A Vertical Take-Off And Landing Fixed-Wing Hybrid Unmanned Aerial Vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Kar Jing (2019) Factors affecting personal financial management behaviors among youth in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chandrasakran, Yogesvaran (2019) Vertical Axes Wind Turbine Power Source For Campus Area With IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Pei Woon (2019) Improving Inter-Person American Sign Language Recognition Accuracy Using Deep Learning. Project Report. UTeM, Melaka. (Submitted)

Che Abdull Kadir, Nur Amirah Firdaus (2019) The Factors Influencing The Adoption Of Additive Manufacturing In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Hassim, Muhammad Dzulhelmy Che Hassim (2019) Design Of Experiment (DOE) Based Approach In Optimizing Finishing Parameters Of CNC Machining Toward Surface Roughness. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Jali, Rosmanira (2019) Educator’s perception towards engineering graduate skills at Universiti Teknikal Malaysia Melaka (UTeM): a fundamental study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Japar, Muhammad Jamal Hafiz (2019) Development Of Garbage Monitoring Systems By Using Ultrasonic Sensor To Help The Sanitary Agency Monitor The Garbage In Area. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Mud, Afifa Hanina (2019) The Challenges Of Supply Chain Management : Case Study Of Takexco. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Razak, Ahmad Fadzrul Nizam (2019) Analysis Of Electrical Characteristics In Strained Si/Sige N-Channel MOSFET Device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Razak, Amir Asyraaf (2019) A Conceptual Design Of Automotive Passenger Compartment Cooling System By Using Solar Power. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Senu, Mohd Ridzuan (2019) Development Of Smart Main Circuit Board For Home Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Di Quan (2019) Development Of Remote Monitoring And Control Of Keyless Entry System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Yin Min (2019) Quadcopter Reprogrammable Virtual Path Follower Design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chen, Mei Cin (2019) Contributions social media toward firm’s fianancial performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheng, Hong Leng (2019) Design And Finite Element Analysis Of Fire Smoke Damper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, Lin Yi (2019) Tensile And Damping Properties Of Graphene Nanoplatelets/Carbon Blacks Filled Chloroprene Rubber Nanocomposite For Engine Mounting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, See Yuan and Mansor, Shuhaimi and Mat Yamin, Ahmad Kamal and Boejang, Hambali (2019) Yaw Angle Effect On Flow Characteristic Of Rear-Roof Spoiler Of Road Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheok, Yan Qi (2019) Development Of Home Use Ankle Rehabilitation Device Using Force Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheong, Jia Mun (2019) FPGA Implementation Of Convolutional Neural Network Using SDSOC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong, Xian Shung (2019) Design Of Piezoelectric Energy Harvesting Circuit For Human Interaction Application. Project Report. UTeM, Melaka. (Submitted)

Chew, Chiew Yik (2019) Development Of Object Recognition System By Using Raspberry Pi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Ke Chin (2019) Synthesis And Characterization Of Al2O3 Added Fe3O4 Nanoparticles Via Sol Gel Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Wan Yi (2019) Factors Influencing The Choice Of Entrepreneurship As A Career Among Undergraduate Students. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Zhen Chang (2019) Determinants of spending behaviour towards debt among young professional in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chia, Cai Yei (2019) Identifying The Challenges And Impact Of ISO 9001 Implementation At UTeM Library. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Wei See (2019) Multiple Face Detection For Surveillance Systems. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chia, Yoong Xin (2019) Factor Influencing Customers’ Purchase Intention Of Green Product In Fast Moving Consumer Goods (FMCG) Sector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiang, Carrey Wai Liong (2019) Artificial Wave Producer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chieng, Jun Yuan (2019) Design And Fabricate An Efficient Rotating System For Mini Hydro Power Turbine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cho, Chooi Ling (2019) The Elements Of Celebrity Endorsement In Affecting Brand Loyalty Of Consumer Towards Brand Or Product. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choi, Li Jia (2019) Deep Learning Based Racing Bib Number Detection And Recognition. Project Report. UTeM, Melaka. (Submitted)

Chong, Chean Yee (2019) Identification Of Pipeline Cracking Area In Underwater Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Hui Woon (2019) Marketing Mix Influence On Purchase Intention Of Fast Food. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Wan Ni (2019) Factor Influencing Generation Y Tourism To Use Social Media In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Wei Nin (2019) Voice Recognition Wireless Home Automation & Sensor Monitoring System Based On Bluetooth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Weng Kong (2019) Design And Implementation Of Deep Learning Enabled Mobile Road Safety Inspection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Yew Fai (2019) Factor Impacting The Level Of Adoption In New Technology Digital Wallet In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choong, Kai Yuen (2019) Implementation Of Critical To Quality In Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chow, Pui Teng (2019) Factors That Influence Dine In Decision Making In Melaka Hipster Hangout Cafes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Christopher, Calven (2019) Motion Control Of A Mobile Robot For Uneven Terrain. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chua, Kah Ying (2019) Factors In Influencing Individual’s Purchase Intention Towards Green Cars. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chua, Kai Lee (2019) Factors Affecting Employee Retention In Automotive Dealers In Batu Pahat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Seok Kien (2019) Examining Technology Readiness And Customer Satisfaction Toward Self-Services Technologies In Luxury Hotels In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Wei Cong (2019) Development Of A Face Recognition System For Attendance Verification Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chuah, Yi Sheng (2019) The Acceptance Of Hydroponic Technology Towards Consumer Buying Behavior In Melaka, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chuan, Justin Chia Yang (2019) A New Design Of Self Charging Unmanned Aerial Vehicle (UAV) System Using Inductive Approach For Precision Argriculture. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chung, See Ern (2019) Investigation Of Curling Effect Of 3D-Printed ABS Structure On Different Print Bed Temperatures And Surfaces. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Coomerasamy, Punethen (2019) Design Of Cooling System For TEG In Generating Electrical Energy From Waste Heat At Night Market. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

Dainil, Nur Fitrah (2019) Effect Of Carbon Nanotube On The Properties Of Graphite-Carbon Black-Polypropylene Composite For Bipolar Plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Daniel, Jonathan Dave (2019) Design And Development Of Automated Front Lighting System With Sensor Integrated For Urban Car Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Darus, Muhamad Firdaus (2019) Design An Antenna Of Orbital Angular Momentum For Wi-Fi Telecommunication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Darus, Sharulnizam (2019) Development Of Fruit Separation Device Using Color Sorting For Food Industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Daud, Muhammad Alif Farhan (2019) The Study Of Super Hydrophobic Coating Based On Coconut Oil For Piping Surfaces In Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Daud, Mujibur Rahman (2019) Simulation On Trajectory Planning Of KUKA LBR4+ Robot Via Three Points Using VREP Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Daud, Nur Alia Liana (2019) Quizu Board Development Of Educational Board That Test Student Knowledge On Signal Block Diagram. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dollah, Siti Norshamimi (2019) Friction And Wear Properties Of Polymer Composite Matrix Made By Tapioca Starch. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dzulkiffli, Najihah (2019) Study On Partial Discharge (PD) Behaviour For Different Type Of Insulation Defects Using Pulse Sequence Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

E

Eddy Barkley Fatani, Adam Daniel (2019) Experimental Study On Thermal Effect Using Sunshades In Vehicle Passenger Compartment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Edi Norsam, Nurliyana Nabila (2019) The Effective Strategy Of Influencer Marketing That Enhance Promotional Strategy In SMEs. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Edran, Siti Seri Banun (2019) Examine Entrepreneurial Intention Expanding To International Marketing Through E-Commerce. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Edward, Syahirah (2019) Ultra-Wideband Bandpass Filter Using U-Slotted Substrate Integrated Waveguide (SIW) Cavities At 12 Ghz For X-Ku Band Radar Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ee, Wei Xiang (2019) Thermal Stress Analysis On Disc Brake Rotor By Using Finite Element Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Elias, Nabilah Syahirah (2019) Development Of Smart Flood Detector. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Emannuel, Chai (2019) Investigation Of Aerodynamic Forces On NACA Airfoils. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Embok Resa, Mohammad Afif (2019) Optimizing The Changeover Of Pressure Die Casting Machine By Implementing Single Minute Exchange Of Die. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eng, Choon Xian (2019) Characterisation Of Pulse Position Modulation Technique For Indoor Visible Light Communication (VLC) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eng, Qian Hui (2019) Electrodeposition Of Copper Chromium (Cu-Cr) Alloy On Fe Substrate In Deep Eutectic Solvent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eswaran, Prince (2019) Factors Influencing Consumer Buying Behaviour Towards Digital Marketing In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Evelyn, Justin (2019) An Investigation On Products Selection For Recycling Using Product Recycling Desirability Model At Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fadhil, Fatin Nur Syahirah (2019) Formation Of Titanium Dioxide Nanotubes Via Two-Step Anodization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadli Yusof, Amirul Ridzuan (2019) Design And Fabricate Vehicle Trainer Kit For Educational Purpose (Body Structure) With Aide Of Computer Aided Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Faizal, Muhammad Faiz Rahimi (2019) Characterization And Analysis On The Quality Of The Anode Material Of Used Low Voltage Lithium Ion Battery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizal, Muhammad Najib (2019) Development Of A Driver Drowsiness Alert System Using OpenCV. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fakhrur Rozi, Muhammad Najmuddin (2019) Ergonomics Design For Supermarket Checkout Station. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauzi, Mohammad Fakhru Razzi (2019) Performance Of A Cloth Drying Cabinet Using Utilizing Waste Heat From A Split Type Air Conditioner Condenser. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fong, Zuyang (2019) Enhancement Of Robot Haptic Sensor Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Yan May (2019) Comparative study between the ISO certified and non certified manufacturing companies towards performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Francis, Klaire (2019) A study of Korean wave: The Sabahan context for country image development. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

G

Gan, Chin Kim and Ab Ghani, Mohd Ruddin and Ibrahim, Khairul Anwar and Au, Mau Teng (2019) Modelling Of Demand Response Strategies For Future Electricity Distribution System In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Chin Kim and Yusup Lada, Musa and Azri, Maaspaliza and Khamis, Aziah and Md Nawawi, Mohamad Riduwan (2019) Voltage And Frequency Control For PV-Based Microgrid By Utilizing Bidirectional Converter With Energy Storage. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Gan, Hock Yang (2019) Solar-Thermoelectric Device Optimization Using A Simultaneous TEG And TEC Characterization. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Gan, Hui Shan (2019) Development Of Smart Door Notification System Using Raspberry Pi. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Gan, Yee Hoe (2019) Impact Test Simulation Of Car Roof Using Finite Element Analysis (FEA). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ganapathy, Vikram Varma (2019) Design And Fabricate Roller For Sticker On Car Windscreen To Improve Blind Spot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ganeson, Kamaageni (2019) Smart Attendance System Using QR Code. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ghafar, Mohamad Aliff (2019) Determination Of Mechanical Properties For Light Weight Engine Mount Housing Using Carbon Nanotube Aluminium Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghazali, Ahmad Syakir (2019) The Study Of Cooling Effect On Photovoltaic Using Computational Fluid Dynamics (CFD). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ghazali, Muhammad Imran (2019) Lever-Chain Mechanism Design For All Terrain Wheelchair. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Goh, Irene Yin Lan (2019) Influence Of Product Attributes Towards Mobile Phone Preference Among Millennial In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Kevin Yu Han (2019) Investigation On Spectral Efficiency And Latency Optimization Scheme For Cloud-Based Radio Access Networks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Kwong Ming (2019) Investigation Of 3D Coverage For LTE Network Using Drone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Govindah, Dinneshiniy (2019) Implementation Of A Voice Command Recognition System (I-Switch) For Home Appliances. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Gunabalan, Vishallini (2019) Development Of Human Security Alert System Based On IoT To Send SOS. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Gunaseelan, Narenthiraan (2019) Development Of Biometric Door Opener With Appointment System Using Face Recognition For Office Security. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Gurdir Singh, Amarjeet Singh (2019) Development Of IoT Fall Detection System For Elderly People. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Gurupadam, Nisanthi (2019) Development And Implementation Of Real Time Monitoring Smart Shoe For Visually Impaired Using Raspberry Pi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Habeeb Mohamed, Muhammad Azmi (2019) Physiognomic Type Preference Tow ARDS The Aesthetic Of Product Design (Shampoo Bottle). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Nuqman Hakim (2019) Development Of Smart Mushroom House Temperature Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Shaiful Mohammed Tashmin (2019) Static Load Test For Hydro-Pneumatic Driveline Propulsion System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Halimi, Azeem Azemie (2019) Development Of Dynamic Olfactometer For The Air Odour Level Detector. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Halmi, Hidayatul Salikin (2019) Web-Based Heartbeat Monitoring System Using Nodemcu And Thingspeak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hambali, Nurul Ain (2019) Structure Analysis In Aluminium 6061 Using Finite Element Analysis For Damage Detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamdan, Hakimi Ezany (2019) Smart Control Water Quality Using IoT In Aquarium. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamdan, Mohamad Syafiq (2019) Vibration Metamaterial For Vibration Absorber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamdan, Noor Najihah (2019) Readiness Of SMEs In Usage Of Linkedin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamid, Mohd Nur Hisyamuddin Ajmal (2019) Investigation Of Kraft Insulating Paper Properties Under Accelerated Thermal Ageing Environment. Project Report. UTeM, Melaka. (Submitted)

Hamidon Zain, Mohd Hafizzuddin (2019) Design And Development Of Dead Man’s Safety Device For Urban Concept Car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamsan, Mohamad Fazly (2019) Design, Optimise And Fabricate A New Modular Interchangeable Upper Part Of Gun Mounting Platform For VAMTAC 4x4 Weapon Platform Vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamzah, Anisah Atirah (2019) Applied Anthropometric Study On Light Vehicle Design And Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Iskandar Dzulkarnain (2019) Development Of Smart Glove For Blind People By Using Ultrasonic Technology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamzah, Muhamad Zainal (2019) Voltage Variation Source Identification System. Project Report. Universiti Teknikal Malaysia Melaka, Faculty of Electrical Engineering. (Submitted)

Hamzah, Muhammad Fikri (2019) Development Of Lightning Detection System Using The Combination Of The Electric Field And Magnetic Field. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hanafi, Muhamad Hafizan (2019) Quality Design Based On Functional And Dysfunctional Tow ARDS Product Attributes Of The Computer Mouse. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanif, Haziq Haiqal (2019) Improvement Of Vehicular Heatstroke Sensor System For Children. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Harizan, Ahmad Hafiy (2019) Development Of Anomaly Detection Using Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harman, Hatiqah Anis (2019) IoT Based Food Ordering System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Haron, Mohd Noor Hafiz (2019) Air Flow Modelling In A Server Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harun, Muhammad Zulfaizam (2019) Customer satisfaction of product attributes using kano method (shampoo bottle). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasan, Haliza (2019) Sliding Friction Performance Of Dry And Oil Impregnated Palm Kernel Activated Carbon Polymeric Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasan, Muhammad Ammar Kamil (2019) Effect Of Coefficient Drag Towards Shark Fin Antenna And Vortex Generator With New Concept Design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasan, Muhammad Fikri (2019) Development Of Vision-Based Luggage Bag Following System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasan, Nur Liyana (2019) Determine The Effect Of Chemical Treatment To The Mechanical Properties Of Parts Produced Using FDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hashim, Hafizzuddin Fahmi (2019) Investigation On 3D Printed Fractal Bow-Tie Antenna At 28GHZ For 5G Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hashim, Hasanah (2019) Factors Affecting Access To The Market By SME Food Manufacturer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hashim, Muhammad Harris (2019) Smart Mirror. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasni, Muhamad Iqram (2019) Automatic volume control using Raspberry PI. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassan, Farah Ilyani (2019) Game For Ankle Rehabilitation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassan, Muhammad Naufal (2019) Design Ultra Wideband Antenna With Defected Ground Structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassan, Syalman (2019) Characterization Of Fuel Delivery System Components Immersed In Different Ratio Of Palm Oil Blended With Diesel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hendra, Hewad Adha (2019) Mobility Analysis Of Modified Proportional Fair (PF) Scheduler In LTELTE-Advance System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Heng, Benny Ek Ming (2019) Drilling Of Titanium Alloy Using Hybrid Nanofluid Coolant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Heng, Wei Zuan (2019) Multi Objectives Performance Optimisation Of Ultrasonic Assisted Drilling Parameter For Gorilla Glass: Parameters Investigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hidayat, Muhammad Yusuf (2019) Tribological Performance Of Expanded Graphite As Oil Lubricating Additive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hisamudin, Mohamad Hasif (2019) Development Of Wire Stripping Machine For Domestic Wiring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ho, Cuo Kei (2019) Does ISO 9001 certification matter for firm performance a group analysis of Malaysia Listed companies. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ho, Su Jen (2019) Feasibility Study Of Remotely Monitored And Controlled Soil Moisture Based Irrigation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Wai Peng (2019) The Influence Of Consumer Perception Towards Purchase Intention For Green Eco Lighting Products. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hoh, Chee Seng (2019) Efficiency of celebrity endorsement on consumer brand loyalty Malaysia sport industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hoh, Sek Yin (2019) The Impact Of Packaging Design On Consumer Purchase Intention Of Cosmetic Products. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hong, Khea Loong (2019) Factors Influence Consumer’s Buying Intention Towards Online Food Delivery Service In Kuala Lumpur, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husshini, Nur Husnina Najeah (2019) Grinding Of Mild Steel With Inclusion Of Quarry Dust Microparticles In The Coolant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussin, Muhammad Khairullah (2019) A Potential Study Of Wind Turbine Generator For Motorways Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussin, Muhammad Nur Imran (2019) Development Of Anti-Theft Vehicle Tracking System With IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Ibrahim, Ahmad Amirul Amin (2019) Smart Visually Impaired Aid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim, Megat Shazrul Izuani (2019) Analysis Of Induction Motor Performance And Its Efficiency At SAMB Water Treatment Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim, Muhammad Hafiz Helmi (2019) Design And Analysis Of Pressing Mechanism For Imroving 3D Printing Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Najihah (2019) Identifying Pull Factors That Influence Tourist Decision Making In Choosing Melaka City. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Nurul Asyiqin (2019) The Impacts Of Innovative Viral Video Marketing Of Consumer Attitudes In The Cosmetics Industry In Malacca. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Nurul Atikah (2019) Design And Development An Integrated Inspection Gauge For Motorcycle Clutch Pressure Plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Zulkifilie (2019) Closing And Prize Giving Ceremony Of FYP Poster & Prototype Competition In Conjuction With Infineon Week@UTeM 2019. [Speech] (Submitted)

Ibrahim, Zulkifilie (2019) Karnival Youngpreneurs Go! (YPGO!@UTeM) 2019. [Speech] (Submitted)

Ibrahim, Zulkifilie (2019) Majlis Pelancaran Amalan Gaya Hidup Sihat Dan SAJ 2019. [Speech] (Submitted)

Ibrahim, Zulkifilie (2019) Perasmian Penutup Microsoft Professional Program Data Science. [Speech] (Submitted)

Idris, Muhammad Alif (2019) Developement Of Contacless Busbar Temperature Monitoring System In Low Voltage Distribution Board. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Idrus, Muhammad Hazwan (2019) Development Of An Interactive Plant Monitoring Device By Using Arduino Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idzeham, Izaidi Zafril (2019) Development Of Wind Turbine For Charging Battery Using Waste Energy From Air Conditioner Compressor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ilyas, Hafizol Haqie (2019) Waterjet Anti-Sink Product Filter For Tiny Part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ishak, Fatin Atiqah (2019) PD-Stability Augmentation System (PD-SAS) Controller For 3-Dof Railway Vehicle Suspension Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Muhammad Aqiuddin (2019) Investigation On Fatigue Properties Of Natural Composite Containing Coconut Coir Using Doe Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Azimatul Hawariah (2019) Development And Performance Evaluation Of A Thermal Insulation Material From Rice Straw Using Hot-Press. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Fatin Nazirah (2019) Analysis Of Components Produced Using Wire Arc Additive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Izatul Aisyah (2019) A study of 7S management method to improve management system within the circulation section in UTeM library. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Mohd Ismady (2019) A Design Of Experiment Approach To Predict Product And Process Parameters For Portable Ablution System Improvement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Muhammad Adib (2019) Mould Flow Analysis Based Product Development For Plastic Injection Moulding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Nur Amira Syahida (2019) A study on factors that influence consumer acceptance of mobile marketing within fashion industry in peninsular Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Nur Eynani (2019) Development Of Smart Leaking Detection System For Gas Cylinder. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Nur Syamimi Auni (2019) The Effects Of Service Quality Toward Students Satisfaction At Higher Education Institution In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Siti Nur Aisyah (2019) Effect Of Temperature And Humidity On The Joints Bonded With Electrically Conductive Adhesive. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ithnin, Fazidah (2019) Laporan Tahunan Universiti Teknikal Malaysia Melaka 2018. [Yearly Report]

Ithnin, Fazidah (2019) Laporan Tahunan Universiti Teknikal Malaysia Melaka 2019. [Yearly Report]

Ithnin, Nur Elia (2019) Employee Perception On Factors Of Innovation Capability That Influence SME Performance: A Study Of SME In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izamuddin, Nur Rohaiza (2019) Investigation On Mechanical, Physical And Environment Properties For Hybrid Method Of Fabrication On Cornstarch Composites Reinforced By Short Pineapple Leaf Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Jaafar, Muhd Solehuddin (2019) Design Optimization And Fabricate Of Hand Free Leg Brace To Improve Conventional Crutches. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jafar, Fairul Azni and Arep@Ariff, Hambali and Saptari, Adi and Maslan, Mohd Nazmin and Md Fauadi, Muhammad Hafidz Fazli (2019) Modelling Disassembly Sequence Through Reverse Assembly And DPN Method For Automated Disassembly. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jafar, Fairul Azni and Saptari, Adi and Jamaludin, Zamberi and Mohd Abid, Mohd Asyadi 'Azam and Ab Rahman, Mohd Hidayat and Mat Ali, Mahasan (2019) System Configuration Of Material Handling Through Integration Of Material Supply And Inventory For Assembly Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jafar, Nurulfaqiha (2019) Development Of An Automatic Lifter Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jaimi, Elmy Ridzmie (2019) Design And Development Of Rear Light System With Operation Indicator For Urban Car Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamadi, Aida Haryati (2019) The Effect Of Alkaline Treatment On The Mechanical And Physical Properties Of Kenaf Fibre Reinforced Vinyl Ester Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamalluddin, Nor Asyiqien Atilah (2019) Effect Of Temperature And Concentration Of Urea Solution In Urea Impregnation Process Into Biochar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamallulil, Arina Dayana (2019) Tribological Properties Of Palm Oil Mixed With Hexagonal Boron Nitride (HBN) Nanoparticles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamaluddin, Nurul Nabila (2019) Performance Investigation Of Vehicle Air Conditioning System Under Different Heat Load. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamaluddin, Nurul Nurfitri (2019) Relationship Between Human Resource Management Practices And Employee Performance In Manufacturing Industry At Serendah, Selangor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaluddin, Nurul Syifaa’ (2019) Ergonomic Risk Assessment On Laboratory Chair User. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Muhammad Amirul Hafiz (2019) Smart Mirror. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamaludin, Zamberi and Jafar, Fairul Azni and Bani Hashim, Ahmad Yusairi and Rafan, Nur Aidawaty and Halim, Mohd Faizal and Md Ghazaly, Mariam and Abd Rahman, Md Nizam (2019) A Novel Extension Of Generalize Maxwell Slip Friction Model In Combination With Super-Twisting Sliding Mode Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaris, Nur Wahidah (2019) Factors Affecting Entrepreneurial Intention Among Technology And Engineering Students Impact Of Entrepreneurship Development Program In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamil, Muhammad Aliff (2019) A Study On Material Of Book Rack Fabricated From Biocomposite Kenaf Fiber-Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jari, Noor Azril Firdaus (2019) Development Of Liquid Gas Petroleum (LPG) Leakage Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jasmai, Nur Hanisah (2019) The Relationship Between Intelligence Quotient And Job Performance: A Study At Service Sector In Selangor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jawahir, Muhammad Nur Shukri (2019) Exploring The Entrepreneurial Motivation Among Disabled Community: The Case Study Of Tun Razak Rehabilitation Centre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jazmi, Nurul Syahida (2019) Hybrid Control Approach Based On PD-Skyhook For Railway Vehicle Suspension System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jenat, Natali Laura (2019) Study Mode Shape Curvature in Aluminum 6061 Using Cubic Polynomial Regression Method Based on Simulation Data. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jendia, Joanna (2019) Elderly Smart System For Fall Detection With GPS Tracker And Medicine Reminder Alarm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jimmy, Danny Ding (2019) An Investigation On Torso Model For Monitoring Compensatory Movement Of Stroke Patients During Cross-Body Reaching. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Johan, Nurul Fatiha and Abdul Rahman, Ahmad Idil and Zulkefle, Ahmad Aizan and Ab Shukor, Syahar Azalia and Abd Halim, Amalia Aida and Baharudin, Zikri Abadi (2019) A Novel Single Phase Shunt Active Power Filter House Hold Appliances With Reference Current Generational Algorithm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Joily, Sherilyn (2019) Productivity Improvement Study Using Lean Techniques At Manufacturing Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Juraimy, Nazatul Shahira (2019) The Factors Affecting Employee Performance In Palm Oil Industry At Felda Jengka 21, Pahang. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

K

Kaini, Muhamad Syahir Syazwan (2019) Development Of HVAC Virtual Laboratory (Hv-Lab); Recirculation Air Conditioning System Training Unit Using MATLAB/Simulink Software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruddin, Luqman Naim (2019) Solar Powered Smartphone Charging Station. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruddin, Nur Syafini Fitriah (2019) Factors That Influencing Consumers Purchase Decision Of Sunscreen Product In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarudin, Nurul Syafiqah (2019) Development Of IoT Based And Monitoring System For Quality Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruzaman, Aliff Farhan (2019) The Design And Development Of Pipeline Inspection Robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruzaman, Syaza Auni (2019) Entrepreneurial Orientation Towards SMEs Food Industry Firm Performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kanasan, Yalini (2019) Development Of An Educational Kit To The Secondary School Students About The Concept Of Electric Current Flow Using Diode And Electrical Circuit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kanipar, Jenani (2019) Development And Implementation Of Smart Econimic Fire Crisis Controller Using Raspberry Pi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Karakaran, Rubasakti (2019) Enhancement Of Productivity Using Overall Equipment Effectiveness (OEE) Through Performance Improvement In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasdi, Den Roko (2019) Handroid - sign language translator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kasim, Muhamad Luthfy (2019) Effect Of Fiber Loading Of Biocomposite Fused Filament Fabrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kassim, Muhammad Amin Firdaus (2019) The decision of product preferences for clothes iron based on the customer characteristics. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kelvin Sembai, Mohd Shahmirzzy (2019) Feasibility Study Of HHO Cell For 150CC Motorcycle SI Engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kerk, Zi Ling (2019) An Experimental Investigation On The Dimensional Accuracy Of Melaka Historical Artifact Fabricated Using Additive Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ketimin, Susandra (2019) An insight of customer’s behaviour intention to use self-service kiosk in Melaka’s fast food restaurant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairuddin, Abdul Rahman (2019) Two Degree Of Freedom (2DOF) Motion Control Of Upper Limb Robotic Arm Mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairuddin, Erna Shuhaida (2019) The extent of entrepreneurial competency and the impact on sustainable growth among micro entrepreneur under Amanah Ikhtiar Malaysia (AIM) in Taiping, Perak. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairul Azman, Muhammad Zarul (2019) Dynamic Performance Of Long Commercial Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Azman, Siti Najihah (2019) Student satisfaction of living environment, hostel facility, residence management and behavioral intentions at Malaysia higher education institutions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairul Herman, Eleeza F Natasyah (2019) Entrepreneurship education on self employment intention among undergraduate students of Universiti Teknikal Malaysia Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khamis, Aziah and Gan, Chin Kim and Ibrahim, Khairul Anwar and Au, Mau Teng and Yusup Lada, Musa (2019) A New Malaysian Reference MV Distribution Network Models For Energy Losses/Efficiency Model And Future Network Development. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khan, Huai Qian (2019) Factors affecting consumer behaviour towards buying smartphone via online shopping websites in Kuala Lumpur, Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khasriman, Fauzul Azem (2019) The factors that influence consumer purchase intention of smartphone. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khaw, Huai Jian (2019) Estimation of distance of human from quadcopter using image processing method for surveillance purpose. Project Report. UTeM, Melaka. (Submitted)

Khawari, Ikhwan Syamim (2019) Design And Development Of Rig And Driving Simulator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kholid, Dewi Suharty (2019) Ingenious prayer mat with smart raka'ah notification device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khoo, Qiu Ti (2019) Reasons behind consumer’s behavioral intentions toward digital piracy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khor, Huai Khang (2019) Investigation Of Phosphate Type Accelerator (Zinc O, O-Dibutylphosphorodithioate,ZBPD) And Silane (BIS(Triethoxysilylpropyl)Tetrasulfide, TESPT) Effect On The Physical And Mechanical Prope. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ko, Christina Yun Fan (2019) Microprocessor-Based On-Street Parking Notification System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ko, Kar Choon (2019) Adhesion Characterization Of Electrically Conductive Polymer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Koh, Guan Chong (2019) Development Of Programmable Wall Switch Panel With IoT System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kok, Hoi Ern (2019) Characterization Of Adhesive Layer Of Laminating Pressed Flexible Printed Circuit Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koo, Weii Liang (2019) The motivating factors influence the entrepreneurial intention among youth generation in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kresnin, Shamini (2019) Investigation Of Rice Husk Content To The Mechanical Properties Of Natural Composite Using Doe Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Krishna Moorthy, Sathya Sri (2019) Design And Fabrication Of Composite Water Tank Added With Fly Ash For Residential Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Krishnan, Harirajan Naidu (2019) Development Of Heart Attack Patient's Tracker Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ku Aziz, Ku Nurfarah Wahida (2019) Development Of 3D Face Recognition Using Mapped Depth Image. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kua, Ann Nee (2019) Overall Equipment Effectiveness Decision Support Tool For Lean Practitioners. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kunyahamu, Siti Nur Syazwani (2019) Design And Performance Evaluation Of An Off-Grid Solar System For Small Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kursus @ Othman, Maisarah (2019) Milling On Titanium Alloy Using Hexagonal Boron Nitride (hBn) Nanofluid As A Coolant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Lagani, Muhammad Shadiq (2019) Vision-Based For The Recognition And Identification Of The Edge Of A Tooth Saw Butt Joint Shape. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lai, Kher Xin (2019) An assessment of Melaka as green technology city state using Melaka Green City Action Plan (GCAP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lam, Jia Wen (2019) The impact of consumers’ attitude towards mobile payment feasibility. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lam, Joa Ann (2019) University-industry collaboration challenges in creating value for eco-innovation among higher learning institution researcher. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Latuwo, Rahman (2019) Physical And Mechanical Properties Of Corn Starch Blended With Polypropylene For Future Automotive Interior Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Carolyn Yee Jie (2019) The Effect Of Heat Treatment Schedule On Mechanical Properties Of Different Carbon Nanotubes Contents In Aluminium Alloy Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Chung Ching (2019) Event Analysis On Conveyor Sorter System With IoT Gateway Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Sie Lin (2019) Investigation On Properties Of Reclaimed Carbon Composite For Assistive Tenodesis Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Law, Kok Wah (2019) Design And Development Of Cooperative Controlled Two Robots For Pipeline Inspection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Cheng Chen (2019) The effect of cause-related marketing on customer purchase intention in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Chian Chin (2019) The importance of employee commitment on organization performance in paper manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Foo Seng (2019) The impact of individual learning style on attitude towards television as advdvertising media. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Hui Kean (2019) Lean Six Sigma For Process Improvement Case Study At A Manufacturing Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Jia Lun (2019) Investigation of information management strategy towards business performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Kah Wai (2019) Improved DTC Using Optimal Switching Strategy For Dual-Open End Winding Induction Motor. Project Report. Universiti Teknikal Malaysia Melaka, Engineering. (Submitted)

Lee, Khar Chun (2019) Investigation On The Effect Of Human Body Weight On Biomechanical Behaviour Of Facet Joints Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Li Yin (2019) The Development Of Pet GPS Tracker Using LORA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Rachel Kei En (2019) The Design Of Inductive Power Transfer For Fish Aquarium System Using Class-E Inverter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Ren Xie (2019) Ergonomic Design Of Adjustable Height Standing Platform For Manual Milling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Ricardo Eik Wen (2019) Development of Arduino-based hydroponic system with user input function. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Shu Fang (2019) Path Planning For Maximizing The Point Of View Of Object Using Robotic Arm With Vision. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Wee Teck (2019) Study Of Flow Inside Thermoacoustic System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Wei Keat (2019) A new strategy of water temperature control based on temperature rate monitoring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Yong Sheng (2019) Selection Of Best Plant Maintenance Strategy Using Analytic Hierarchy Process(AHP), TOPSIS-AHP And Fuzzy-AHP. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yoong Chee (2019) The impact of CRM adoption on the sales growth of service-oriented small and medium enterprises in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Zong Chen (2019) Mobile Robot Navigation System Vision Based Through Indoor Corridors. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leong, Adrian Wai Chen (2019) Development Of PID-Type Fuzzy Logic Controller With Adaptive Invasive Weed Algorithm To Control Of Flexible Arm System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leow, Kien Loong (2019) Development of wireless system for shuttlecock launcher. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liang, Cai Hong (2019) Voltage Stability Control For Micro Grid With Artificial Intelligence Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liau, Kok Keong (2019) Design And Characterization Of ISFET Based Device For Biomedical Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liew, Jia Xian (2019) Realization Of PLC Controller-To-Controller Vertical Communication By Using OPC-UA. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liew, Quek Shiung (2019) Design And Construction Of Robot Head System Using Speech Recognition To Express Emotions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Yoong Ler (2019) Design And Analysis Of Food Container In Plastic Injection Molding Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Boon Cheong (2019) Hand Gestures Recognition Using Deep Neural Network. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Chiaw Hong (2019) The impact of enterprise resource planning system toward organizational performance in a case study micro-company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Eu Sheng (2019) Development Of Standard Time In Die Bond Process : A Case Study In A Semiconductor Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Hui Teng (2019) Development Of Simultaneous Localization And Mapping (SLAM) Robot By Using Raspberry Pi. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Jing Xuan (2019) Determinants customer satisfaction in general insurance services among young adults in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Qin Jing (2019) Characterization And Mechanical Testing Of Waste Tire Dust Modified Bitumen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Wei Shuang (2019) The impact of family-friendly workplaces on the retention of employee. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Wei Xiang (2019) Evaluation Of Compact Stacked Capacitive Antennae For Realtime Rainfall Tracking. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Wei Yi (2019) The awareness in application of green accounting among SMEs in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Wing Theng (2019) Navigation With Simultaneous Localization And Mapping Using KUKA Youbot : Simulational Study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Yan Ying (2019) Electrodeposition Of Nickel Aluminide Based Alloy On Fe Substrate In Deep Eutectic Solvent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Yong Hock (2019) The Optimization Of Laser Machining Parameters For Hole Cutting Of Stainless Steel Using RSM Approaches. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Zi Jie (2019) The factors that influence the intention to use of high-end chipset smartphone among Gen-Z in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lin, Soong Jin (2019) Effect Of Stretchable Conductive Ink On Electrical Conductivity Under Tensile Stress. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lin, Wei Qi (2019) Effect Of Nano Cellulose Industrial Tea Leaf Fiber On The Physical And Mechanical Properties Of Polylactic Acid (PLA) Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ling, Hung Zin (2019) Factors influencing consumer's attitudes to continuously use the mobile shopping applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ling, Stephen Kie Kai (2019) Design And Development Of Position Control For Robot Gripper Mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lo, Michelle Claudia (2019) The benefits of social media towards purchasing behavior among UTeM student. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lo, Wei Keong (2019) Implementation total quality management and innovation determine competitive advantage in manufacturing sector of Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loh, Mun Loong (2019) Design And Verification Of Pick And Place Arm Model By Using Petri Net. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loke, Wai-Eu (2019) Deep Learning Inference Engine Speed-Accuracy Trade-Off Analysis For Person Search. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lokman, Mohd Iskandar (2019) Wind Loading Analysis On A Residential Roof Mounted Photovoltaic Panel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lokman, Rusmiati (2019) Performance Investigation Of Vehicle Air Conditioning Under Different Compressor Speed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loo, Wan Er (2019) Radical or incremental innovation? Insight in innovation choice of manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Looi, Hong Ming (2019) The Performance Characteristic Of A Rod Wire Parallel Hole Collimator For Gamma Camera. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Looi, Kah Hong (2019) Factors driven university-industry collaboration in creating value for eco-innovation in biomass industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Low, Hui Qi (2019) Development of smart door lock using microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Low, Kah Lai (2019) An Experimental Investigation On The Surface Finish Of Melaka Historical Artifact Fabricated Using Additive Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lua, Yong Weng (2019) Conceptual Retrofit Design Of A Green Building Office From An Existing Building. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lunong, Rupertus (2019) Design And Development Of Security System For Motorcycle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M

M. Azman, Akalili Asilah (2019) Investigation On The Characteristic Of Thermoplastic Cornstarch Composite Reinforced Short Pineapple Leaf Fiber (PALF) By Using Mixer Method Of Preparation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M. M. Akram, Muhammad Faisal (2019) Design Of Rainwater Harvesting And Filtration System For Domestic Use. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M. Noorawi, Norliana Izaty (2019) Strength Of The Welded Medium Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M.Saleh, Nurul Amalia (2019) Development Of Neuro Epilepsy Recognition System Using Artificial Neural Network (ANN). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahadi, Muhammad Ammar (2019) Building Energy Performance Challenges & Potential. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadi, Muhammad Mukhlis Aiman (2019) Design And Fabrication Of 3 Wheels Stand Up Electric Scooter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahamad Azudin, Muhamad Daniel Azrai (2019) Analysis Of Sound Insulation Of Trim Materials In Car Using Kenaf Fibres With SEA. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Maharun, Muhammad Adib (2019) A New Design Optimization Of Lightweight Lower Control Arm For B-Segment Passenger Car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahat, Nurfarah Diyanah (2019) Home Water Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahmud, Nurmunirah (2019) An empirical study on the influences of website design towards customer satisfaction in online shopping. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahusain, Nurliyana (2019) The effects of viral marketing on sales performance in SMEs food industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Maidin, Shajahan and Alkahari, Mohd Rizal and Akmal, Suriati and John, Wong Huang Ung and Mohamed, Ahmad Syafiq (2019) Vacuum System Assisted Fused Deposition Modeling To Improve Fracture Toughness And Surface Finish. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Malaya, Nur Iylia (2019) Productivity Improvement Through Work Standardisation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mamat, Nurul Ain Fadhillah (2019) Performance Investigation Of Vehicle Air Conditioning System Under Different Ambient Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Manap, Muhammad Aiman (2019) Design And Optimization Of Piezoelectric Array Configuration For Impact Based Energy Harvesting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Manimaran, Nagen Raj (2019) Design and development of automatic proper posture detection chair. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Manogran, Devaki (2019) Characterization Of Acrlonitrile Butadiene Styrene – Hexagonal Boron Nitride Composite For 3D Printing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mansor, Nabilah 'Aisyah (2019) Implementation Of Torque Hysteresis Controller (THC) For Brushless Direct Current (BLDC) Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Manveeran, Lingeshwara (2019) Study Of Compression Strength Of Glass Fiber Reinforcement With Concrete. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marah Azman, Nurin Lydia (2019) Development Of Learn-In-A-Box Electronic-Based Educational Kit For Signal Block Diagram Design Concept Using Arduino And MIT Apps. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marhaban, Nur Afiqoh (2019) Purchase Intention Of Customers On Health-Related Products In Melaka State. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Marodzuan, Adlia (2019) Average Dynamical Frequency Behaviour For Islanded Micro-Grid System With Multiple Generators. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mas'ud, Mohd Zaki and Selamat, Siti Rahayu and Sahib, Shahrin and Yusof, Robiah and Abdollah, Mohd Faizal (2019) A New Incident Event Discovery Model Based On Traceability Matrix For Mobile Forensics Investigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Husin, Mohamad Hakim (2019) Evaluate the factor affecting customer satisfaction in fast food restaurant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Said, Nurul Syazlina (2019) Service quality effect towards customer satisfaction on the bookstores (Melaka). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Sarif, Amirul Syahiran Izman (2019) Output Membership Function Tuning Of Fuzzy Logic Speed Controller For Induction Motor Drive Application. Project Report. UTeM, Melaka. (Submitted)

Mat Sohaili, Muhammad Hilman (2019) Development Of Electric Generator By Using Hydroelectric. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Yusof, Azira (2019) Effect Of Tensile Test Specimen Geometry On Mechanical Property Of 3D Printed Single Struts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mayudin, Amir Asyraaf (2019) Development Of IoT Based Industrial Control And Monitoring System For MAP 202. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhammad Nasiruddin (2019) Waste Engine Oil Influence On Viscosity And Rheology Properties Of Asphalt Binder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Nur Hashiela (2019) Factors influencing customer satisfaction in health care services. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazlan, Nurnazatul Shasha (2019) Entrepreneur characteristics and firm performance on Malaysia food and beverage industry SMEs. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazlan Supawi, Nurul Amiza (2019) Investigation On Incomplete Fill Problem Of Quad Flat Package In Semiconductor Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazli, Hani Syafiza (2019) Designing A Web-Site Of Probrand Clothing Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ma’arof, Nurfarhana (2019) Leadership style and its impact on employee performance at Rompin district and land office of Pahang. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Arsad, Siti Fatimah (2019) Development Of IOT Based-Mini Hydroponic System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Fadilah, Mohd Syafi’ie (2019) How brand element influence consumer buying decision on fast food. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Hairi, Aida Zulaikha (2019) STEM education at Melaka vocational secondary school as a preparation for industrial employment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Hamsani, Muhamad Fairuz Rezza (2019) Community Energy Storage Dispatch Strategy For Maximizing The Techno-Economic Benefits. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Lazim, Azati Hanani (2019) Development Of An Electronic Educational Board That Test Student Knowledge On Logic Gate Design Concept Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Nazri, Nur Fadzlina (2019) Determinants of adopting non-technological innovation for SMEs in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Noor, Mas Nasabillah (2019) Optical Character Recognition Using Template Matching. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Nor, Nurul Afifah (2019) Smart Multifunctional Padlock Through RFID For Bike Or Others. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Shaidi, Muhammad Nabil (2019) Home Plantation Soil Moisture Monitoring System Using IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Suffian, Nur Sharlin Arina (2019) Factors influencing employee behaviour towards information system security (ISS) in the organizations. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Yusof, Siti Hajar (2019) Factors determining consumers’ acceptance of mobile payment in food and beverages (F&B) industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Yusof, Siti Nur Huda (2019) Development Of Queue Line System For Washing Machine Using Android. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md.Nor Hayati, Norilani (2019) Service Quality Evaluation Of University Facility By Using Kano Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Megat Dazuti, Megat Adam (2019) Design And Development Of A Kinetic Energy Harvesting System For Speed Bump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Megat Mohd Arif, Megat Muhamad Izzul Iman (2019) Fish Recognition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Megat Mohd Asri, Puteri Nur Aisyah (2019) The Mechanical And Physical Properties Of Pineapple Leaf Kenaf Fibre Reinforced Vinyl Ester Hybrid Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mei Hui, Lim (2019) Development Of Object Following Robot Using Raspberry Pi. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Meor Affendi, Nurul Aizzati (2019) Trajectory Planning Of Hip Powered Orthotic Device Using Cubic Polynomial Equation With Via Point. Project Report. UTeM, Melaka. (Submitted)

Mesri, Masturah (2019) Curing Characteristics And Mechanical Properties Of Styrene Butadiene Rubber (SBR) Filled With Industrial Waste Derived Ashes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mhd Said, Shahidatul Aida (2019) Production Improvement Of A Food Manufacturing Process Through Lean Six Sigma Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Misdan, Nursahada (2019) Determinant service quality online banking towards young users in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Misran, Amirul Siddiq (2019) Vertical Takeoff And Landing (VTOL) Aircraft Concept Design In Supporting Medical Supply Delivery To Obsolete Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Miswan, Mifzal Syahiran (2019) Development Of Safe Airport Trolley. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mletchumanan, Dharshani (2019) Investigation Of Coconut Coir Content To The Mechanical Properties Of Natural Fibre Reinforced Composite Based Doe Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Moahamd Saleh, Md Nor (2019) Majlis Iftar Bersama TYT Tun Canselor UTeM (Part 1). [Image] (Submitted)

Moahamd Saleh, Md Nor (2019) Majlis Perutusan Naib Canselor 2019 (Part 3). [Image] (Submitted)

Mod Zin, Muhamad Fakhrur Razy (2019) Design Of Circularly Polarized Antenna At 2.45 Ghz With Harmonic Suppression For Energy Harvesting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Marina (2019) Characterization Of TiO2 Coating Prepared By Thermal Spray Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Adhar, Nur Farahin (2019) Smart Cat Feeder Using IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Ali, Umi Syazana (2019) Digital Reproduction Of Malay Relic Components Obtained From Non-Contact Laser-Based Reverse Engineering System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Asli, Nurain Iylia (2019) Social media used by tourists: The implication to tourism industry in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Daud, Alif Aiman (2019) A New Design Concept Of Lightweight Knuckle For B-Segment Passenger Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fazilah, Siti Aida Natasha (2019) Conversational commerce: A comparison of social messaging and social media as effective communication in purchasing activities. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Fodzi, Nurul’Ain Haniyun (2019) Environmental And Physical Properties Of Thermoplastic Cassava Starch Beeswax Reinforced With Sugarcane Bagasse Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hanapi, Nurul Narina (2019) Stair Climbing Motion Control For Portable Mechanism. Project Report. UTeM, Melaka. (Submitted)

Mohamad Isa, Fatin Nurdiyana (2019) Line Balancing Of Pressure Relief Valve (PRV) Assembly Process For Enhancing Producivity And Efficiency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Napiah, Nur Aliah (2019) Design And Development Of Assistive Mobile Application For Visually Impaired Using Machine Learning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nazri, Nur Kamal Hisyam (2019) The Effect Of Dirt On An Engine Cooling System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Nor, Mohamad Luqman (2019) Design Of Self-Tuned PID Controller For Linear Direct Drive System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nor, Mohamad Syahmi Damia (2019) Solar Photovoltaic System Fault Identification Using Artificial Intelligence. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Rahadi, Mohamad Saiful Azhar (2019) Design And Development Of A 6x6 Oil Palm Fruit Bunch Utility Transporter Lifter System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Rahimi, Siti Noor Dalilah (2019) The study of consumer's comprehension towards online travel agency application in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Sabri, Mohamad Amin (2019) Development Of Water PH Stabilizer For Smart Garden. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Safri, Muhammad Syafiq Zikri (2019) Magnetic Field Calculation On Three Phase Transmission Line Using Maxwell’s Equation In MATLAB. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Saleh, Md Nor (2019) 6 th TMAC Symposium 2019. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) The 6th Mechanical Engineering Research Day 2019 MERD19 (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) The 6th Mechanical Engineering Research Day 2019 MERD19 (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Aspirasi UTeM Bersama Naib Canselor. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Bicara Minda Sastrawan Negara. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) CEO Talk bersama FTKMP, FTKEE dan FPTT. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Forum Empoweringwomen In Engineering Research And Education. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) ITEX 2019 (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) ITEX 2019 (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) ITEX 2019 (Part 3). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) ITEX 2019 (Part 4). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) ITEX 2019 (Part 5). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Konvensyen Kumpulan Inovatif dan Kreatif KIK Kali Ke-5 Peringkat UTeM (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Konvensyen Kumpulan Inovatif dan Kreatif KIK Kali Ke-5 Peringkat UTeM (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Konvensyen Kumpulan Inovatif dan Kreatif KIK Kali Ke-5 Peringkat UTeM (Part 3). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Konvensyen Kumpulan Inovatif dan Kreatif KIK Kali Ke-5 Peringkat UTeM (Part 4). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Lawatan Balas Pihak Dreamedge Sdn. Bhd. Ke UTeM (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Lawatan Balas Pihak Dreamedge Sdn. Bhd. Ke UTeM (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Lawatan Japanese Multinational Study Group (JMNESG) East Asean Research System (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Lawatan Japanese Multinational Study Group (JMNESG) East Asean Research System (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Lawatan PNC Ke Pejabat Keselamatan UTeM (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Lawatan PNC Ke Pejabat Keselamatan UTeM (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Lawatan Penanda Arasan Bahagian Pengurusan Kualiti BPQ UPSI Ke UTeM. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Lawatan Sesi Perkongsian Ilmu UTeM Dan IUKL. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Mahabbah Aidilfitri UTeM 2019 (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Mahabbah Aidilfitri UTeM 2019 (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Mahabbah Aidilfitri UTeM 2019 (Part 3). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Mahabbah Aidilfitri UTeM 2019 (Part 4). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Anugerah Gemilang Universiti (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Anugerah Gemilang Universiti (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Anugerah Gemilang Universiti (Part 3). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Aspirasi TNC Hal Ehwal Pelajar 2019 (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Aspirasi TNC Hal Ehwal Pelajar 2019 (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Aspirasi TNC Hal Ehwal Pelajar 2019 (Part 3). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Diskusi Bersama Profesor Ulung Datuk Dr Harith Bin Ahmad. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Iftar Bersama TYT Tun Canselor UTeM (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Menandatangani MOU Antara UTeM dan Universitas Negeri Malang Indonesia (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Menandatangani MOU Antara UTeM dan Universitas Negeri Malang Indonesia (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Menandatangani Memorindum Persefahaman (MoU) CREATE Dengan CELCOM AXIATA BERHAD. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Menandatangani MoU Antara UTeM Dan UNMER Indonesia (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Menandatangani MoU Antara UTeM Dan UNMER Indonesia (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Penyampaian Sijil Program Latihan Microsoft Professional Program Data Science Dengan Kerjasama UTeM KPM Dan MICROSOFT. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Penyampaian Sijil Program Latihan Microsoft Professional Program Data Science Dengan Kerjasama UTeM KPM Dan MICROSOFT (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Perutusan Naib Canselor 2019 (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Perutusan Naib Canselor 2019 (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Syarahan Professor Dr Md Nor Hayati Bin Tahir. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Majlis Syarahan Umum Perlantikan Profesor. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Mesyuarat Agung PRAKTIS 2019. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Mesyuarat LPU UTeM 2019. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Mesyuarat PGIM Bersama Delegasi Jepun. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Mesyuarat Pembukaan Lawatan EAC. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Pendaftaran Pelajar Baharu Diploma Sesi Akademik 2019/2020 (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Pendaftaran Pelajar Baharu Diploma Sesi Akademik 2019/2020 (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Pertandingan ‘MATERIALS LECTURE COMPETITION’ Peringkat Kebangsaan (Akhir) (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Pertandingan ‘MATERIALS LECTURE COMPETITION’ Peringkat Kebangsaan (Akhir) (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Program Brainstorming Berkaitan Flagship Product. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Program Integriti Dan Akauntabiliti Penyelidik UTeM. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Program Outreach Bersama UTeM 2019 (Part 1). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Program Outreach Bersama UTeM 2019 (Part 2). [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Program UMP UTeM Operation Strategy Benchmark. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Sesi Mahasiswa Baharu Bersama TNC. [Image] (Submitted)

Mohamad Saleh, Md Nor (2019) Taklimat Pentadbiran Oleh Pengerusi LPU UTeM 2019. [Image] (Submitted)

Mohamad Shahrul Naim, Saidin (2019) Development Of Resistive Sintering Furnace For Sintering Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Wahid, Arifudin (2019) Development Of Smart Classroom Using NodeMCU ESP8266. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Yusof, Nur Syazwani (2019) The impacts of e-commerce adoption on business growth in SMEs halal food industry in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Zin, Mohamad Danial Aiman (2019) The Characteristics Of Thermal Energy And Momentum Transfer Across Solid-Liquid (S-L) Interfaces Between Face-Centered Cubic (FCC) Latice And Simple Liquid. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed, Ibrahim Soliman (2019) Automated Vision Inspection Based IC Component Locator Using Deep Learning. Project Report. UTeM, Melaka. (Submitted)

Mohamed Khair Johari, Mohamad Azahari (2019) Reverse Vending Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Nasir, Mohamad Fahmi (2019) Design And Simulation Of An Electro Pneumatic System For Food Industry (Putu Mayam). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Razak, Mohamad Ikhwan (2019) A Study On Effect Of Laminated Rubber – Metal Spring On Tensile And Hardness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Said, Nurul Sofiyah (2019) Factors affecting the acceptance of social media as a business platform among potential entrepreneurs. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Zoefry, Mohamed Awis Qirani (2019) Ultra Lightweight 3D Printed Immobilization Cast For Bone Fracture Treatment In Orthopedic. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad, Fahmi Amirul (2019) Design And Analysis A Controller For AUV Path Navigation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Ali, Nur Fatihatur Rawdhah (2019) Formulation Of Green Printing Ink From Waste Cooking Oil For Digital Printing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Haniff, Imanina (2019) Cyclic Voltammetry And Charge/Discharge Analyses Of Asymmetric Supercapacitor Based On Graphene/MoS2 And Graphene Electrodes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Yusoff, Muhammad Kamal (2019) Optimization Of Spaceframe Chassis Of Shell Eco-Marathon Challenge Urban Car Using Shape Optimization Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad Zaidi, Muhammad Aminul Fitri (2019) Developing Water Monitoring Network System And Water Treatment Using Antenna And IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd, Ahmad Fadlie Hadi (2019) Factors influencing purchasing decision among youth on eco-friendly packaged product. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Adam, Norfatin Nabila (2019) The Impacts of supply chain management on employee’s hypermarket performance case study at Mydin USJ 1 Subang Jaya Selangor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ali, Muhammad Haris Izzuddin (2019) Bio-Degradable Grease Formulation Using Fresh Palm Oil As Precursor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Alip, Mohd Zarul Amirul (2019) Development Of Intelligent Switching Power Storage For Domestic Usage. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Amin, Siti Khuzaimah (2019) Reliability Study Of Printed Electronics On Flexible Substrate For Automotive Lighting Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Anuar, Fathin Nuramirah (2019) Analysis Of Breakdown Voltage Measurement Uncertainties For Different Standards. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Apandi, Nur Shasha Fatihah (2019) Effect Of Single Self Contained Dual Vacuum Clamping On Acrylics End Milling Performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Aras, Mohd Shahrieel and Sulaiman, Marizan and Abdullah, Shahrum Shah and Md Basar, Mohd Farriz and Kamarudin, Muhammad Nizam and Ismail, Zool Hilmi and Mohd Zambri, Mohd Khairi (2019) A New Adaptive Simplified Fuzzy Logic Controller For Depth Control Of Underwater Remotely Operated Vehicle In The Presence Of Uncertainties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Nur Izzati (2019) Simulation Study Of Drying Chamber For Marine Product. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Azizi, Nur Ain Nazihah (2019) Influence Of Clay Content On Mechanical Properties Of Clay-Polymer Composites For Roof Tiles Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Azlan, Nur Athirah Adiba (2019) Development Of An Electronic-Based Educational Board Game For Teaching Kindergarten Kid About Spelling Of Basic English Words Using Arduino And Bluetooth (e-spelling). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Bani, Rabiatul Adawiyah (2019) The effectiveness of personal selling approaches towards consumer buying decision. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Eza, Muhammad Najib (2019) Addition Of Lithium Hydroxystereate Into Used Cooking Palm Oil As Bio-Degradable Grease Formulation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Faizairi, Muhammad Faiq Aqil (2019) The Effect Of Ni-TiO2 Coating On Different Substrates. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal, Fatin Khairiyah (2019) Factors that contribute to green entrepreneurship inclination among generation Y in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Farah Nurain (2019) Examining the benefits and barriers of e-business adoption among travel agencies in tourism industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Nor Syakilla (2019) Thermal Analysis Of An Electric Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazil, Mohammad Hanis (2019) Overall Equipment Effectiveness Improvement Through Single Minute Exchange Of Die Implementation: A Case Study On Stamping Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fuzi, Muhammad Zahid (2019) Lean Tools Application For Productivity Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Gzali, Nurul Farhana (2019) Aesthetic preferences based on customer personality and characteristic (Water drinking bottle). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hamdan, Muhammad Hafiz Hamizi (2019) Development Of Teaching Aid Device To Enhance Technologist Understanding On The Second Law Of Thermodynamics Using Pugh's Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Harun, Arfah Hafieza Mohd Harun (2019) Development Of An Intelligent Trainer Board For Arduino Components. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hasnan, Hasnika (2019) Transformational leadership and organizational climates on innovative work behavior. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hatta, Mohd Amir Amin (2019) Determinants of customer satisfaction towards mobile internet services in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hayat, Nurul Atikah (2019) Analysis Of Local Binary Pattern By Using Uniform Bins As Palm Vein Pattern Descriptor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hizul Azri, Syahidatul Fatimah An-Nur (2019) Investigation Of The Heat Treatment Process To The Adhesion Of Graphene On Copper Foil For Prismatic Graphene Supercapacitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Husin, Mohd Haizal and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli and Jenal, Ruztamreen and Mat Dan, Reduan and Taib, Mohd Taufik (2019) Parametric Investigation Of Biodiesel Properties To The Storage Condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Husni, Mawaddah Haslyanti (2019) Investigation Of Muscle Fatigue For Problematic Feet Using EMG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Iqbal Dhilbir, Muhammad Firdaus (2019) Smart LPG Cylinder Monitoring System For Consumer Use. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Isa, Nur Farah Adlia (2019) Design And Development Of Recycle Plastic Wall Panel Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ithnin, Naili Izzati (2019) The awareness of near field communication (NFC) technology security towards mobile wallet usage among public universities’ students in Malaysia’s southern region. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Jamal, Muhammad Hafiz (2019) The Study On The Effect Of Side Mirror Position To The Motorcycle View And Blind Spot Area. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Johaidi, Muhammad Jahir Haziq (2019) Design And Fabrication The Electric Mini Scooter Folding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Anuar, Maisara (2019) Research on innovation: The case review of tehnopreneurs in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Kharil@Hamzah, Muhamad Nafis (2019) Smart Aquaponics Monitoring System Based On IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Khir, Muhammad Khairul Hafizi (2019) Development Of Smart Car Parking By Using Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khusairi, Muhammad Luqman (2019) Optimization Of Recycle Water Jet Sand Moulding Composition For Sand Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Lok Pi, Nur Insyirah Hanani (2019) Development of conveyor system integrated with vision-based inspection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Maraie, Mohamad Hadihafizul (2019) Application Of Total Productive Maintenance (TPM) To Minimizing Quality Problem In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mokhtar, Nur Farah Ainaa (2019) Development Of Smart Water Usage Monitoring System To Monitor And Collect Water Billing In Real Time. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mustafa, Muhammad Aiman (2019) Study And Design A Step Up DC-DC Converter For Renewable Energy Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasil, Siti Nor Fatihah (2019) Influencing success factors toward studies performance among student's housemate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nasir, Muhammad Nur Azwan (2019) Substation Transformer Monitoring System Using Global Service Mobile (GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Nur Syafiqah (2019) The effect of Malaysian celebrity endorsement on consumer purchase intention of smartphone brands. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nayawi, Mohamad Azril (2019) Design And Development Of Tyre Emergency Supporter For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nizam, Ahmad Basyir (2019) Development Of Smart Shopping Cart Using RFID & GPS System With IoT-Cart-o-Matic. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Noor, Muhammad Fikri (2019) Study Of Physical Properties Of Indoor Air Quality At University Technical Malaysia Malacca Library. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor, Nur Izzati (2019) The drivers of e-marketing adoption in small and medium enterprise: A survey on food manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Radzi, Adil Alimi (2019) Performance Evaluation Of Counter Rotating Vertical Axis Wind Turbine In Low Wind Speed Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Raman, Fazrin Khalilah (2019) Optimization Of Laser Cutting Parameters On Surfaced Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rashid, Muhammad Hazwan (2019) Development Of Eddy Current Sensor To Detect Defect/Crack On Metal. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Rasid, Amirul Hanif (2019) Effect Of Short Pineapple Leaf Fiber Treatment On The Properties Of Pineapple Leaf Fiber- Starch Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rozlan, Nur Hidayah (2019) Design And Development Of A Quality Inspection Gauge For Checking A Motorcycle Piston. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saad, Muhammad Iqbal (2019) Design And Fabricate Wheelchair Lift Control System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sabri, Mohamad Nur Azmie (2019) Analysis Of Energy Consumption In Air Conditioning System At Technology Campus UTeM, Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Safeai, Shahrul Affifudin (2019) Design And Development Jig And Fixture For Waterjet Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sahib, Zulhakim Mubasyir (2019) IoT-based smart gas leakage detector and fire prevention system with GSM module. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Saleh, Muhammad Rais (2019) Design A Mobile Database Using SQL For Probrand Shop. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salleh, Muhammad Athif Syamim (2019) Development Of Interactive AR Playbook Using Unity 3D For Oculus Rift With Leap Motion. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Salleh, Nur Syahirah (2019) A Design And Fabrication Of Motorcycle Jack Lifter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Shaari, Nur Syamimi (2019) Development Of Projek Sarjana Muda Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shah, Muhammad Syamim (2019) Study on consumer intention to use e-wallet in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Shahrin, Muhammad Hafidzal (2019) The Effect Of Temperature Against Nonlinear Effect In Vibro-Acoustic Method On Solid Structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sharif, Muhamad Adzhar (2019) Design And Analysis Of Hydraulic Power Steering System For Steering Test Rig. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shariff, Abdul Qaiyum (2019) Performance Analysis Of Personal Air-Conditioning System Using Evapolar As Heat Waste Management. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Shariff, Muhammad Shafiq Adam (2019) Message Conveyor By Motion For Paralyze People Powered By Radio Frequency (RF) Energy Harvesting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sha’ari, Muhammad Aizat (2019) Gravitational Effect On Water Flow Of Venturi Fertilizer System (VFS) For Agriculture Fertigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Shuib, Muhammad Amin Khusairie (2019) Campus Network Multicast Using Huawei eNSP Network Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shukran, Mohamad Shafiq Hilmi (2019) Arduino Based System For Ingredient Dispensing In Gula Melaka Production. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Shukri, Nurul Ajmal (2019) A study of halal cosmetic and personal care among Non-Muslim: A consumer perspective. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Tahir, Muhammad Syahir Akmal (2019) Omnidirectional 1090 MHz Antenna For Automatic Dependant Surveillance Broadcast (ADS-B). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yasin, Muhammad Nur Hakim (2019) Factors influencing customer perception and purchase intention towards organic foods. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Yatim, Najwa Izaati (2019) Analysis Of Multi Beam Technique For Array Antenna At 28 Ghz. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Yusoff, Nur Sabrina (2019) Comparison Of Two Seats Design In Terms Of Postural Discomfort And Pressure Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zain, Aliff Akmal (2019) Security Letter And Parcel Box Using GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zaini, Mohammad Noh Faiz (2019) A Study On Vibration Behavior On Vertical Washing Machine Via Vibration Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaini, Muhammad Sadiy Syafiq (2019) Ergonomics Workplace Design In Assembly For Persons With Disabilities. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zali, Amirah Nasiha (2019) Ergonomics Study Of Working Posture In Assembly Process At SME Manufacturing Company (Standing). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zawawi, Nurafiqah (2019) A study on the adoption of lean management techniques: Case study in bakery industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zin, Adinda Hadirah (2019) Realization Of A Working Prototype Of Wearable-Chair. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zulfakar, Nur Allyssa (2019) Food Waste For Electricity Production In Microbial Fuel Cell (MFC). Project Report. UTeM, Melaka. (Submitted)

Mohd Zuraini, Mohammad Zakwan (2019) Reclamation Of Waste Cooking Oil Methyl Ester. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohmad Wahi, Muhammad Iqmal Redza (2019) Development Of 3D Image From Camera For ROV Navigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mokan, Edwin Raj (2019) Development Of High Security Locker System For Safety Purpose Using Android Mobile Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mokhtar, Mohamad Hafiszi (2019) Performance Of Double Chamber Microbial Fuel Cell Based On Different Type Of Wastewater And Electrodes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mokti, Nur Zaakhir (2019) Effect Of Thermoplastics Cornstarch Composite Blend With Agar On Mechanical, Physical And Environment Behavior. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mortadza, Siti Fatimah Khadijah (2019) Multiblock Generation For Hexahedral Meshing Of Irregular Profile. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad, Hafiy (2019) Digital Image Correlation On Adhesive Used In Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Azamuddin, Alia Amira (2019) Mechanical Properties And Optimization TIG Weld Parameters On Aluminium Alloy 5052. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Nazli, Nurul Najihah (2019) The impact of designing a good packaging for small and medium-sized industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Nazri, Nur Nasrin (2019) Website quality dimension on customer satisfaction in e-commerce context (Books industry). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Raus, Nur Liana Anira (2019) Characterization On The Natural Source Properties For Digital Printing Ink From Waste Cooking Oil Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Siyuni, Mardhiah Syuhaiba (2019) The impact of entrepreneurial education towards entrepreneurial intentions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Arif, Nurul Akmaliah (2019) The development of E-unicycle braking system by using voice recognition command. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Danial Azraei, Azlan (2019) Fabrication Of Alumina-Copper Composites By Using Resistive Sintering Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Sayuti, Muhammad Riduan (2019) Neuro – Assisted Exoskeleton For Finger Using Brain Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Shahimi, Muhammad Shahid Aslami (2019) The Spherical Glass Concentrator On Photovoltaic Module With The Installation Of Dual-Axis Solar Tracking System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Shalihin, Abdul Aziz (2019) Preventive Maintenance Of Medium Speed Electric Train System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Shukri, Muhammad Zaim Shahmi (2019) The Evaluation On The Effect Of Aging To The Interfacial Bonding Of Pcb Soldered Using SAC305. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Yunus, Muhammad Syafiq (2019) Development Of Vehicle Detection And Counter For Traffic Surveillance System Using Raspberry Pi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yusoff, Mohamad Azrul Azwa (2019) Experimental Of Free-Load Hydro-Pneumatic Propulsion System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zainuddin, Muhammd Khairuddin (2019) The Mechanical Properties Of Palm Oil Fiber Reinforced Polyproplene Composities. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muklas, Muhamad Hafizuddin (2019) Motorcycle Accident Alarm System By Implementation Of Electronic Control Unit (ECU). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Murad, Nasrul Haziq (2019) The Study Of Flank Wear Using Coated Aluminium Chromium Nitride (AlCrN) Boron Steel 22MNB5 On Aluminium AA6061. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa, Amirul Izwan (2019) A Study On New Material Of Car Door Panel Fabricated From Biocomposite Kenaf Fiber-Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa, Anis Masyitah (2019) Impacts of organizational culture towards project success in construction industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Musa, Muhamad Aqmal (2019) Analysis Of Shape Recognition Using Robotic Fingers By Image Processing Technique For Object Manipulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa, Norfarhana (2019) Factors affecting consumer purchase intention through online shopping among UTeM student. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Musazali, Mussyahirah (2019) Development Of Overall Equipment Effectiveness (OEE) In Casting Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muslim, Muhammad Fakhrur Iqbal (2019) Investigation On Mechanical Properties Of 3D-Printed Single Strut. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mustafa, Ahmad Hafizzuddin (2019) Automatic Portable Sheet Cutter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mustafa Kamal, Nurshafiqah Nabilah (2019) Development Of Neuro-Control Powered Wheelchair System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mustafah, Muhammad Ameer Khan (2019) Design And Analysis Of IoT-Based Wireless Healthcare Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapha, Mohamad Azrul Fahmi (2019) Early fire detection with alarm system using digital image processing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mustar Redi, Muhammad Syaamil (2019) Smart Traffic Control System For Ambulance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muthukumar, Kanimohly (2019) The Development Of Web Based Online Parking Reservation System For Android. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mutussin, Muhammad Fakhruddin (2019) Air And Temperature Flow Distribution Inside Terrace House. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

N

Nablan, Muhammad Amirullah (2019) Achieving Work Balance Through Simulation Modelling And Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nadzri, Zaty Zhafarina (2019) Characterization And Mechanical Testing Of Elastomer Modified Bitumen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nafi, Aliaa Syahirah (2019) Image Compression With Discrete Cosine Transform (DCT) By Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Naning, Nur 'Ain Madihah (2019) The approach to product innovation based on quality attributes and parameter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nassiruddin, Muhammad Amirul Adli (2019) Design And Development Of An Integrated Quality Inspection Gauge For Width Slot Spur Gear. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nazir, Muhammad Fadli (2019) The relationship between product brand and quality perception among Melaka city consumer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nazir Ali, Nornazirah (2019) Factors that affect the green technology awareness in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nezia Irecha Andi Putri (2019) The influence of transformational leadership styles and job satisfaction on lecturer performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Che Han (2019) Battery Thermal Management By CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Lim Huat (2019) Impact Test Study For The Frontal And Side Of Spaceframe For Formula Racing Car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Rui Ying (2019) A Study On Selective Laser Sintering Behaviour And Processing Of Polymer Powder Mixtures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Shu Hui (2019) The implementation of quality management system (QMS) using DMAIC tools. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Siew Man (2019) Characterization And Gravimetric Analysis Of Exposure From Selective Laser Sintering (SLS) PA12 Nylon Powder Handling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Siew Xing (2019) Synthesis And Characterization Of K₀.₅Na₀.₅NbO₃ Thin Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Vi-Vian (2019) Design And Development Of Piezoelectric Micro-Generator For Powering Up Low Electronic Device. Project Report. UTeM, Melaka. (Submitted)

Ng, Wei Keat (2019) The factors of entrepreneurial personality characteristics on business failure of Small and Medium Enterprises (SME) in Melaka, Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Xin Ni (2019) Ergonomics Risk Assessment On Manual Material Handling Tasks For UTeM Pembangunan Staff. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Yeong Siang (2019) A Characterization Of Thermoelectric Energy Harvesting From Electric Kettle. Project Report. UTeM, Melaka. (Submitted)

Nik Hassan, Nik Watikah (2019) Investigation On The Relationship Between Safety Features And Safety Rating A Case Study On Malaysian National Car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (In Press)

Nik Moh Nawi, Nik Mas Adina Atisya (2019) An empirical evidence of job satisfaction among employees at Melaka halal hotel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nik Rusli, Nik Nurin Sarafina (2019) Performance Investigation Of Condensate Assisted Vehicle Air Conditioning System Under Different Condensate Temperature. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Rozali, Noor Hakimi (2019) Development Of Vibration Test Rig For Teaching And Learning. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Noorazmi, Muhammad Naquib (2019) The Mechanical Properties & Microstructural Analysis Of Welded DPS In Compliance To A Selected International Standard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noordin, Zahrul Irfan (2019) The impact of green attributes on customer loyalty of supermarket in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Afendi, Ummi Sakinah (2019) The influences of celebrity endorsement attributes towards youth customers' purchase intention in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Alzahari, Nur Farah Hani (2019) Penyiasatan Perambatan Halaju Bunyi Ke Atas Bahan Yang Melalui Proses Rawatan Haba Menggunakan Ujian Ultrasonik. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Aslan, Nur Amirah (2019) Weld Quality Comparison Between Fusion Welding And Solid State Welding On AA1100. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azaruddin, Muhammad Zaim Sirajuddin (2019) The performance of business school student using massive open online course (MOOC) in Faculty of Technology Management and Technopreneurship (FPTT). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Azli, Nurul Hafizah (2019) A Study Of Poly-Crystalline And Thin-Film Solar Panel For Renewable Energy Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Azman, Ahmad Hazim (2019) Analysis Design Of Vehicle For Occupant Packaging. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Azmee, Nur Laili Izzati (2019) An Automated Bus Arrival Information System For Terminal Bus Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Halim, Aida Syahirah (2019) Study On Mode Shape Curvature In Aluminum 6061 Using Cubic Polynomial Regression Method Based On Experimental Data. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norazam, Nur Fatin Diyanah (2019) Design And Development Of An Integrated Quality Inspection Gauge For NT40-0Z25-70 Milling Arbor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazman, Muhammad Afiq Naqiuddin (2019) Development Of Portable Solar Training Kit For Educational Purposes. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norbi, Intan Shahirah (2019) The effects of recesion on consumer buying behavior towards shopping and brand switching. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norddin, Nurbahirah and Zainuddin, Hidayat and Saadon, Intan Mastura and Aman, Aminudin and Abd Razak, Jeefferie (2019) Tracking And Erosion On Silicon Rubber Under Both Polarities Of DC Voltage. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Nordin, Mohamad Ikhwan (2019) Sensorless PMSM Drive Using Extended Kalman Filter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nordin, Mohamad Rashidi (2019) Development Of Building Information Modelling (BIM) For Lab Scale By Using Autodesk Revit. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nordin, Muhamad Saiful (2019) The implication of supply chain management on consumer purchasing decision towards food industry in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nordin, Muhammad Fahmi (2019) Experimental Study Of The Air Conditioning Ducting Of The Bus For Optimum Cooling Performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norhaminudin, Nurul Shaqirah (2019) Investigation Of Fatigue Behaviour Of Pineapple Leaf Fiber Reinforced Polylactic Acid Composited. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norhisham, Muhammad 'Asri (2019) Study To Improve Product Development Of River Trash Collector System By Applying Design Of Experiment Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norizan, Mohd Syamim Asraf (2019) Variable Speed Control For A Two-Mass Wind Turbine System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norzamri, Siti Nor Iffah (2019) Underwater Color Correction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurdin, Muhammad Izzat (2019) Implementation Of IoT Based Data Acquisition System For Photovoltaic Panels. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nurdin, Muhammad Nasruddin (2019) Vibration Analysis Of BCC Lattice Structure Materials Using Finite Element Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

O

Omar, Muhammad Azim (2019) Preparation And Characterization Of PANI / GNPs Nanocomposites For Flexible Wearable Textile Antenna Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Nurul Ashiqin (2019) Density Characterizations Of Organic Solvents By An Optical Technique. Project Report. UTeM, Melaka. (Submitted)

Ong, Chen Teng (2019) Integration of total quality management and enterprise resource planning to enhance Royal Malaysia Police productivity performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ong, Choon Seng (2019) Experimental Investigation Of The Optical Fibers Bending Loss Under Different Bending Radii. Project Report. UTeM, Melaka. (Submitted)

Ong, Juang Jeat (2019) Development Of An Application That Collect Education Materials (Training, Talk) By Using Android Studio Programming Language: Java. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Kim Soon (2019) Developing enterprise resource planning through total quality management to improve quality performance of Malaysia's maritime freight forwarding. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ong, Li Ting (2019) Analysis Of Visual Design Implementation In Advertisements Towards Consumer Perceptions Among Baby Boomers And Generation Z. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Thian Chye (2019) Design And Fabricate The Fire Prevention System Module Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Toby Yi Kang (2019) Smart Robotic Arm In Medicine Allocation Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ong, Tze Jiun (2019) Design And Implementation Of Precision Agriculture Using Lorawan Iot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ong, Tze Tung (2019) Investigation Of Current Monitoring System For Water Pump. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ong, Wei Lin (2019) Using Time Study To Improve Productivity Of Furniture Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ooi, Jian Wei (2019) Design And Construction Of A 4-Legged Robot In Various Surface Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi, Qi Xiang (2019) The Investigation Of Aerosol And Nanoparticles Emission From Selective Laser Sintering (SLS) 3D Printer Process Using Recycle And Virgin Powder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi, Wei Zheng (2019) Pneumatic actuator system controller design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Othman, Ahmad Atifi (2019) OKU (Disability) Smart Parking. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Othman, Ahmad Faiz Hambali (2019) A New Design Concept Of Lightweight Rear Axle For B-Segment Passenger Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

P

P. Manickavelu, Gogulan (2019) The Investigation Of GMAW Process Variables On Lap Joint Of Aluminium Alloy 5083. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Padmanathan, Devaraj (2019) Design And Development Of IOT Based Real-Time Residential Energy Meter Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Pahorudin, Nor Aisyah (2019) Investigation Of Machining Cost Modelling Based On Product Drawing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pang, Mei Siu (2019) Analysing customer satisfaction : Consumer behaviour towards the selection of beauty products in Klang Valley. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Pauzi, Faiz Syazwan (2019) The Characteristics Of The In-Cylinder Fluid Flow Of The 660cc Petrol Engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Pejabat Pendaftar (2019) Academic Regulations & Guidelines For The Academic Regulations Systems: Bachelor Degree & Diploma Programme. Penerbit Universiti, Durian Tunggal.

Perpustakaan Laman Hikmah, Unit Rujukan (2019) ACM & ASME Training 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Bacaan Yasin Dan Tahlil oleh staf Perpustakaan Laman Hikmah. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Bengkel Latihan Sistem Pengurusan Islam Malaysia (SPPIM). [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Bengkel Pemurnian Daftar Risiko Perpustakaan Laman Hikmah. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Bengkel Perancangan Strategik Pemerkasaan Repositori Institusi IR UTeM 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Bengkel anjuran Pusat Edu-Pelancongan UTeM. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Bengkel “Whole-Brain Speed Reading Secrets”. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Bicara Buku “27 Tertib Mazhab Bisnes Jepun” oleh Dato Hj. Zulkifli Abdul Malek di Perpustakaan Laman Hikmah UTeM. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Cabutan Kempen "Cashless Campus". [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Jamuan Hari Raya Peringkat PTj (Perpustakaan Laman Hikmah) 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Karnival Produk Inovasi: IDP Cup. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Kelas GRA. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Kelas Pembangunan Sistem Perpustakaan KOHA. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Kelas Pendidikan Pengguna GRA/RA/SRA. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Kursus Pemantapan Kaunter Sirkulasi. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Kursus Supporting Researchers With Research Tools & Information Literacy 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Kursus Transformasi Perkhidmatan Pelanggan Cemerlang 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Bersama NC Ke Rumah Rasida & Sabrina. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Dari KPM Sempena Mesyuarat Ketua Pegawai Maklumat. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Dari Kolej Vokasional Dato Seri Md Zin Alor Gajah. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Dari Pelajar Universiti Sains Malaysia (USM) 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Dari Sek Men Keb Dato' Abdul Rahman Andak. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Dari Sekolah Menengah Kebangsaan Banang Jaya Batu Pahat, Johor. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Kolej Vokasional Perdagangan, Johor Bahru Ke PLH. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Pelajar USM Ke PLH. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Pelajar Universitas 'Aisyiyah Yogyakarta (UNISA) 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Penanda Aras Daripada Kolej Kemahiran Tinggi MARA Masjid Tanah, Melaka. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Penanda Aras dari Institut Pendidikan Guru. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Penanda Aras staf PLH Ke UNITEN. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Penanda Aras staf PLH Ke Yayasan Kepimpinan Perdana. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Penanda Aras staf UPSI. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Penandaarasan Kolej Vokasional Datuk Seri Abu Zahar Ithnin, Jasin, Melaka. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Lawatan Sekolah Kebangsaan Permas Jaya, Pasir Gudang. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Majlis Kesyukuran Bersama Staf PLH. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Majlis Penyerahan Sijil Penganugerahan MaPTeP Matriks Pengurusan Tenaga Kepada Pusat Tanggungjawab. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Majlis Perlancaran Read@Uni. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Majlis Soft Launching Pengoperasian Ruang 24 Jam Perpustakaan Laman Hikmah (PLH). [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Online Database Training: Knovel & Summon. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Pelaksanaan Audit Dalam MS ISO 9001 2015 Tahun 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Pendaftaran Pelajar Baru Sesi 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Penggunaan Ruang Santai PLH. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Program "Info Hunt Library" Sempena Read@Uni. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Program Bedah Buku Bersama Profesor Madya Dr. Norliah Binti Kudus. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Program Kesedaran Tenaga: Senario Penggunaan Tenaga Global Dan Kesan Penggunaan Tenaga Tak Terkawal. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Program Khidmat Bakti Ke Endah “PLH Endah@Komuniti”. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Program Library Outreach 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Program Penada Aras Sekolah Sek. Men. Tawau, Sabah. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Program “Scam & Al Awfar” Oleh Bank Islam Malaysia Berhad. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Projek Mengecat Dan Menghias Bilik Pasca Siswazah. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Publishing Talk "How To Publish" From Oxford University Press (OUP) which presented by Sumita Sen. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Reference Open House (ROH) 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Research Session: “How To Improve Your Research Visibility?”. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Ruang melukis mural di Ruang Santai, PLH. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Sambutan Hari Keluarga LISTAC 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Science Direct & Scopus Training 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Sembang Buku Mentaliti Jamban Bersama Khairul Abdullah. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Sesi bergambar Sambutan Hari Raya Peringkat PLH. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Taklimat Akta Penyerahan Bahan oleh PNM. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Taklimat Pelajar Pesisir Indonesia 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Taklimat Tatacara Pengurusan Aset 2019. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Talkshow@Library Oleh Jabatan Perubatan Forensik, Hospital Melaka. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Tazkirah Jumaat - Pengajian Kitab Imam Al-Qurthubi. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Turnitin Training For Academic Staff. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2019) Workshop On Step By Step Guide To Writing Research Paper. [Image] (Submitted)

Phan, Tse Wai (2019) Air And Noise Pollution Monitoring System Over Internet Of Things. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Phang, Hwee Yuan (2019) Factors influencing consumers perceived risks towards online grocery shopping in Johor Bahru. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Pheng, Syie Chie (2019) Investigation Of Motion Analysis For Productivity Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Phoon, Siew Teng (2019) Omnichannel and the effects towards SMEs performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Pitchamuthu, Vegneshwaran (2019) Development Of Smart Tracking System Using GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Po, Dolly Jim Ming (2019) Investigation Of The Length Over Diameter Ratio Of Tandem Pipe By Computational Fluid Dynamics Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Puteh, Nur Syakirah (2019) Influence Of Ball To Powder Ratio And Heat Treatment Process On The Properties Of Electrodeposited Nickel-Quarry Dust Composite Coating. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

R Mohamad Faudzi, Raja Mohamad Fareeq (2019) Environmental And Physical Properties Of Thermoplastic Cassava StarchBeeswax Reinforced With Cogon Grass Fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

R. Danabal, Sarath (2019) Development of tongue driven system for medical application using hall effect sensor and Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Radzali, Nurliyana (2019) The Mathematical Model Of Photovoltaic Array In MATLAB/Simulink. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Shahidan, Raja Ahmad Hamezan (2019) Development Of Self Navigator For Open Water Swimmer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rajah, Sasitharan (2019) Design And Construction Of Organic Food Waste-Fertilizer Conversion System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rama Chenderan, Dinesh Kumar (2019) Estimation And Identification Of Lightning Electromagnetic Field Waveforms Utilizing Signal Processing Method. Project Report. UTeM, Melaka. (Submitted)

Raman, Interan (2019) Thermal And Flow Analysis Of Heat Sinks For CPU Cooling By ANSYS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramanathan, Suresh (2019) Development Of Hand Orientation Measurement For A Hand Muscle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramlan, Muhammad Asyraf (2019) Energy Performance And Thermal Comfort Evaluation Of University Library Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramlan, Rohaizah (2019) Fault Detection And Diagnosis Of Air-Conditioning System Using Convolutional Neural Network. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramlee, Naim A'imullah (2019) Establishment Of Value Stream Mapping (VSM) Of Balloon Production. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramli, Muhammad Erfi (2019) Effect Of Dielectric Barrier Discharge (DBD) Plasma Actuator On Wind Turbine Blade. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramli, Nor Adilla (2019) The Influence Of Packaging On Consumer Preferences For SME Packed Food SME Perspectives. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ranom, Rahifa (2019) Numerical Analysis Of The Efficiency Of Lithium Ion Battery During Discharge Using Method Of Lines Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ravenda, Thevand (2019) Home Automation With Google Assistant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ravichandran, Aravinthaan (2019) Study On Thermal Discomfort Of Motorcycle Helmet User. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ravintheran, Suhanthan (2019) A Study On Kansei Engineering On Product Development Using AHP Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razaki, Anis Ashila (2019) The study of factors that influence consumer’s purchase behavior of green products. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Razani, Muhamad Imran (2019) The acceptance of agriculture sector towards the employment of ex-convicts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Razid, Nor Atirah (2019) Effect Of Surface Treatment On Pineapple Leaf Fibre (PALF) And Its Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ridzwan, Muhammad Fazihan (2019) To Design A Model Of An Open And Underground Rain Water Harvesting System Using Recycled Material And To Study Its Benefits For Domestic Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosdie, Mohd Said (2019) Corrosion Behaviour Of Mild Steel Coated With Epoxy-PANi-Phosphorus Thin Film In 3.5 WT Percent NaCl Solution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosdin, Muhammad Rozhan (2019) Design And Fabrication Of Three-Wheel Transportation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roslan, Ahmad Zakwan Zarif (2019) Sustanability and future challenges of halal product consumption. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roslan, Idham Haziq (2019) Development Of Hockey Training Kit For Hockey Training. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Muhammad Alif Haziq (2019) Design And Development Of A Control System For A 4 Wheel Skid Steering Mobile Robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosland, Mohd Nazreen Shahrin (2019) Tribology Analysis Of Polyol As Lubricant Additive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roslee, Nur Aqilah (2019) Electronic customer relationship management (e-CRM) The impact of e-CRM practices for business sustainability in SMEs Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Mohamad Fadhli Iqbal (2019) Manipulation Of Kuka Youbot With Hand-Motion Using Webcam And Marker Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Nabihah Nasha (2019) Factors influencing consumer's willingness to purchase private label brands. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Nurwahida (2019) Toolpath And Holes Accuracy Of Robotic Machining For Drilling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosman, Afrina Aida (2019) A Deep Learning Algorithm To Detect Children With Autism Spectrum Disorder (Asd) Using Electroencephalogram (Eeg) Signal. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosman, Muhammad Rafiq (2019) Multi Objectives Performance Optimisation Of NR/EPDM For Compression Molding Process: Parameters Investigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosmunawar, Amirul Asyraf (2019) Antenna Design For Detection Of Angular Momentum Signal From Lightning. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rossman, Mikhail (2019) Development Of Waste Heat Recovery Unit For Light Weight (Motorcycle) By Using Thermoelectric Generator (TEG). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosszainily, Hawa Najihah Asni (2019) The Effects Of Cell Porosity And Thickness Upon The Performance Of Lithium-Ion Battery. Project Report. UTeM, Melaka. (Submitted)

Rostam, Nur Ayuni (2019) Effect Of Sintering Temperature And Soaking Time On Microstructure And Mechanical Properties Of Alumina- Zirconia Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozali, Muhammad Asyraf (2019) A Study On New Material Of Storage Table Fabricate From Bio Composite (Coconut Fiber) Based. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rozi, Muhammad Nasrullah (2019) Design Of Scrubber System For Treatment Of Welding Gases. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozman, Suraiya Natashya (2019) Factors Influence The Adoption Of Mobile Banking For Reservation (MBR) Among UTeM Undergraduates Students. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rozuki, Muhammad Fikri (2019) Comparison Different Type Of Material For 15 Slot 14 Pole Permanent Magnet Linear Generator. Project Report. UTeM, Melaka. (Submitted)

Ruffehe, Muhammad Aizuddin (2019) Design and development of ingenious dishes vending machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ruslan, Nur Ain Aqila (2019) Experimental Investigation On Reducing Energy Cost By Improving Shaft Motor Coupling Alignment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ruslan, Siti Nur Hajar (2019) Analysis Of Cascade H Bridge Multilevel Inverter For Asymmetrical Configuration. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rusli, Muhamad Hashim (2019) Smart Parking System Using IoT For Security. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rusmadi, Nabil Fikri (2019) Development Of Car Park Monitoring System Based On IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S

Saadon, Intan Mastura and Ghazali, Rozaimi and Ahmad, Suziana and Mohd Annuar, Khalil Azha and Norddin, Nurbahirah and Johari, Siti Halma (2019) Synthesis Of Linear Quadratic Controller For Electronic Stability Control With Hardware-In-The-Loop And In-The-Vehicle For A 3-Tonne Truck. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saaidin, Siti Nursyazwani (2019) Quality improvement towards web design appearance based on customer preferences on online bus booking ticket. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sabri, Syafiqah (2019) The consumer attitude towards smartphone advertisement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sagivan, Prasanth (2019) Development Of IoT Based Portable Ultraviolet Light-Emitting Diode (LED) Exposure Box For PCB Circuit Printing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sahak, Nur Rasyidah (2019) Modelling And Assessment Of Energy Losses For Medium Voltage Distribution Network At Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka. (Submitted)

Saharuddin, Nurul Syaza Izzaty (2019) A Study On Mechanical, Physical, And Environment Properties On Thermoplastics Cornstarch Composite Reinforced By Untreated Pineapple Leaf Fibre Using Hybrid Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sahib, Shahrin (2019) Anugerah Akademik Universiti 2018. [Speech] (Submitted)

Sahib, Shahrin (2019) Anugerah Perkhidmatan Cemerlang 2019. [Speech] (Submitted)

Sahib, Shahrin (2019) Kayuhan Transformasi Ramadhan. [Speech] (Submitted)

Sahib, Shahrin (2019) Kempen Keselamatan “Mesej Di Aidilfitri” Pejabat Keselamatan Tahun 2019. [Speech] (Submitted)

Sahib, Shahrin (2019) Lawatan Pihak HLMG & GUOCERA. [Speech] (Submitted)

Sahib, Shahrin (2019) Majlis Anugerah Gemilang Universiti (AGU) 2018. [Speech] (Submitted)

Sahib, Shahrin (2019) Majlis Penyerahan Zakat Oleh Bank Islam Malaysia Berhad. [Speech] (Submitted)

Sahib, Shahrin (2019) Majlis Penyerahan Zakat Oleh Malaysia Building Society Berhad (MBSB) Bank. [Speech] (Submitted)

Sahib, Shahrin (2019) Majlis Perasmian Penutupan dan Penyampaian Hadiah Temasya Olahraga Tahunan 2019. [Speech] (Submitted)

Sahib, Shahrin (2019) Majlis Perasmian Soft Launching Pengoperasian Ruang 24 Jam Perpustakaan Laman Hikmah (PLH) Universiti Teknikal Malaysia Melaka (UTeM). [Speech] (Submitted)

Sahib, Shahrin (2019) Majlis Perutusan Naib Canselor 2019. [Speech] (Submitted)

Sahib, Shahrin (2019) Majlis Sambutan Tahun Baharu Cina FTK. [Speech] (Submitted)

Sahimi, Nur Amirah Fasihah (2019) Optimization Of Laser Jet Machining Parameter On Composite Using Taguchi. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sahrani, Muhamad Firdaus (2019) Effect Of Carbon Black Loading On The Properties Of Graphite- Epoxy Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sahul Hameed, Syazwani Husna (2019) Optimization Of 19 NM SOI MOSFET With High-K Material As Gate Spacer Using Statistical Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Said, Nurazreen Insyirah (2019) Development Of Semi-Automated Mushroom Picker Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saiful Bahrin, Sharyna (2019) Development Of IoT Based On Monitoring And Control System For Lifecycle Management. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saleh, Nursyaza Syahida (2019) The relationship between self-leadership and organizational commitment : Case study in Melaka housing board. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salih Junaid, Ahmed Mohammed (2019) Measuring customer behavior intention to use self-service laundry in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salleh, Effi Nur Shazleen (2019) Effect Of Matrix Ductility On The Properties Of Pineapple Leaf Fibre Reinforced Poly Lactic Acid Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salleh, Faizah Farhani (2019) The effects of entrepreneurship attributes on undergraduates’ intention to become entrepreneur. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salleh, Nur Khairiena (2019) Factors influencing consumer intention to use smart bike-sharing services in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salleh @ Sallah, Mohamad Fairuz (2019) Development of alcohol detection system with vehicle immobilization. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samat, Anis Hazirah (2019) Investigation On Mechanical And Thermal Properties Of 100% Recycled 3D Printed ABS Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsi Tabaris, Siti Zalrabi’atul Adawiah (2019) The readiness of green packaging usage among businesses in Bukit Katil, Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsudin, Ammar Masdiq (2019) Development of Autonomous Underwater Vehicle (AUV) vision system by using Raspberry PI camera. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsudin, Nurul Syahira (2019) Classification Abnormalities Of Eyes Using Bag Of Features For Medical Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sanusi, Syazwan (2019) Modeling And Force Tracking Control Of Bouc-Wen MR Damper Model. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sapeai, Putri Nilam Baiduri (2019) A study on the influence of loyalty program membership towards customer purchase behaviour. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sapuan, Fatin Norazian (2019) Factors That Influence Consumers Online Purchase Intention. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saraswathy, Rajandran (2019) Linear Generator Performances Determination For Wave Harvesting System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sarwe, Nurul Amalina (2019) The impact of macroeconomic factors to household debt in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Satro, Muhamad Arib (2019) Development Of River Trash Collector. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saupi, Siti Nurmariah (2019) A Study On Extrusion Process Of FLD-25 3D Filament Machine And Optimization Of Temperature Parameter For Filament Production. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sawar, Khairul Anwar (2019) Accurate Measurement Of Microwave Sensor For Mixtures Material Characteristics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sazali, Amir Hafiz (2019) Investigation Of The Buckling Behaviour Of Cone-Cylinder Transition With Dimple Imperfection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

See, Tho Zheng Feng (2019) Networked Control System Based On Powerline Communication Technology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Selva Raja, Hemananthiny (2019) Consumers' attitudes towards viral marketing in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Selvam, Aravind Raj. (2019) Flow Analysis Of Cabinet Fertigation System Using CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Selvaraju, Pavinraj (2019) Portable air quality monitoring system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Seng, Qi Xin (2019) The role of FPTT in UTeM teaching factory project. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Seu, Wen Ping (2019) The impact of lean manufacturing tools on organizational performance in manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shafaie, Nur Shahidah (2019) Development Of Electronic-Based Educational Trainer Kit For Huffman Coding Design Concept Using Arduino And MIT Apps. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shafie, Masitah (2019) Influence Of Ultrasonic Amplitude And Saccharin Content On The Properties Of Electrodeposited Nickel-Quarry Dust Composite Coating. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaharani, Muhamad Afiq (2019) Eco Jute - Investigation Of An Optimal Bico Fiber And Jute Blend Composition For HVAC (Duct Liner). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahidan, Nur Syuhada (2019) The effect of organisational of work stress, employee performance, turnover and absenteeism in electrical and electronic manufacturing sector. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shahril, Muhammad Azrul Amri (2019) Investigation Of Convective Heat Transfer In A Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shairi, Noor Azwan and Zakaria, Zahriladha and Ahmad, Badrul Hisham and Othman, Abdul Rani (2019) A Novel Integrated Generalized-Chebyshev Bandpass Filter And Notch Filter With Reconfigurable Capabilities For Next Generation Wireless Communications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shammidi, Nur Suhada (2019) Developing franchising model : The case study of Barkat Original Roti John Asli Sdn Bhd. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamshol Ali, Nur Aifaa (2019) Spiral Dynamic Optimization Algorithm For Engineering Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamshul Joehari, Nur Aqilah Amirah (2019) Factors influencing students intention to choose online purchasing in clothing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamsuddin, Muhammad Hafizudin (2019) Online System Development for Critical Parameter Observation in Electronic Fabrication Laboratory (Thesis). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamsudin, Muhammad Amirul (2019) Interior Package Design and Development of Energy Efficient Shell Eco-Marathon Urban Car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamsudin, Nor Fazilah (2019) Multi-Response Optimization In 16nm WSi2TSiO2 N-C hannel MOSFET Device Using Taguchi Method With GRA. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamsul Azhar, Aiman Syukri (2019) Study Of Spark Plugs Performance With Different Electrode Diameters And Types Of Electrode In Spark Ignition Engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamsulakmar, Nursyahirah (2019) Design and development of a sensory instrumentation system using internet of things for air quality. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shanmugam, Deneshen (2019) IoT based Electrocardiograph (ECG) monitoring system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shapie, Norhidayah (2019) The Relationship Between Leadership Style And Employee Productivity. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sharif, Mohd Luqman Hakim (2019) Optimzation Of Biodiesel Production From An Edible Oil And Its Characterization By Using Response Surface Methodology (RSM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shariff, Anis Sabirah (2019) The Study Of Flank Wear Using Uncoated Boron Steel (22MnB5) On Aluminium (AA6061). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shariffuzan, Mohammad Hafidz Amri (2019) Hybrid Source Uninterruptible Power Supply. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shokri, Sazanee Azmina (2019) Green marketing impacts on customer’s products preferences among UTeM students. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shuhaimi, Suaidah (2019) Development Of Real-Time Flash Flood Alert System In Shopping Mall Parking IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sia, Khang Ruis (2019) A study of corporate employee performances through training programs for continuous improvement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Siew, Si Kai (2019) Energy Management In Non-Residential Building. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sim, Shin Yee (2019) Factors affecting open innovation acceptance among employee of small and medium - sized enterprise (SMEs) in Negeri Sembilan. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sim, Yiew Yiew (2019) Investigation Of Mechanical Properties Of Recycled ABS Printed With Open Source FDM Printer Integrated With Ultrasound Vibration. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sintar, Junior (2019) EMG Controlled System Of 4-DOF Robotic Arm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Siva Subramaniam, Siveneswari (2019) Development Of IoT Based Patient Health Monitoring Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivagiganesan, Dhayalan (2019) Design And Construction Of Food Waste-Biogas System For Small Scale Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sivaji, Kushallini (2019) Optimization Of Fiber Optic Using Sensing Applications Using Taguchi Approach. Project Report. UTeM, Melaka. (Submitted)

Sockalingam, Sasithra (2019) Development Of Laboratory Equipment Borrowing System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sofian Gan, Muhammad Amin (2019) Development Of Autonomous Underwater Vehicle (AUV) Attitude Control By Using Raspberry-PI. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Soh, Ray Qiu (2019) An investigation of big data in healthcare among health consumer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Soh, Shi Ling (2019) Development Of Ankle Orthosis For Ankle Injury Prevention. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Solahudin, Muhammad Alief Aqwa (2019) Railway Wheel Wear Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Soon, Li Qing (2019) The determinants of social media usage that are affecting the employee’s performance in private sector in Penang. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Soong, Kimberly Mei Ling (2019) Critical success factors and challenge of women entrepreneurs on business performance in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sothi, Laavanya (2019) A User Acceptance Of Chemical Management System (CMS) Using Kansei Engineering. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Soung, Christine Shiang Lan (2019) Consumer purchase behaviour and knowledge toward implementation of sales and services tax (SST). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sow, Jin Huat (2019) Functional Properties Of Electrically Conductive Adhesives As Interconnect Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Stivan, Monikaa Lisa (2019) Residential Meter Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Su, Pei Shin (2019) A study on measuring patients’ satisfaction using SERVQUAL model in Melaka private hospital. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Su Azmi, Muhammad (2019) Customer satisfaction and preferences based on quality of product using Analytical Hierarchy Process (AHP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suhaimee, Muhamed Emeer Shazreef (2019) Design Improvement Of The Deflasher Mechanism For Blow Molding Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suhaimi, Mohd Shafiq Aminuddin (2019) Performance Evaluation Of Water Injection System For Naturally Aspirated Engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suhaimi, Muhammad Amir (2019) Portable PCB Etching Machine With Developing Of Internet Of Thing (IoT). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suhaimi, Muhammad Hafiz Azim (2019) Development Of Chassis For Shell Eco Marathon. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suhaimi, Norhaslina (2019) Development Of Henna Drawing Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sulaiman, Jahakim Siregar (2019) Method for start-up companies to sustain in start-up phase in Tekun National Institute in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sulaiman, Mohd Syahfendy (2019) Design Of Aerodynamically Efficient Shell Eco-Marathon Urban Car Through Front Face Design Optimization. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sulaiman, Muhamad Faizal (2019) A Study On Body Panel Fabrication On Light Vehicle Structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sulaiman, Muhammad Syafiq (2019) Structural Equation Model Of Technology Innovation Model Using AMOS For Researsher Of FTK In UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sulaiman, Nur 'Amirah (2019) Implementation Of Sustainable Energy Management System (SEMS) At Admin Block Of FKE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulaiman, Nur ‘Aqilah (2019) Energy Storage (ES) Sizing For Commercial Building With Solar PV. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulong, Mohd Faez Azrin (2019) Study Of Chemical Properties Of Indoor Air Quality At UTeM Library. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suzurina, Norsyahira (2019) Rejuvenate exotic culture tourism in Melaka rural area. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sy Othman, Syed Abdul Alif (2019) Perception of service quality on customer satisfaction of hotel services in Malacca city. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Syed Baharuddin, Syed Muhammad Hanif (2019) Development of horizontal single axis solar tracker via arduino approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Syed Zainuddin, Siti Saiyidah (2019) Assesment Of Vortex Dynamics Of Blood Flow In Mechanical Heart Valve. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

T

T.Mhd Arifin, Tengku Ahmad Salahudin (2019) Design And Development An Ergonomic Hand Wrist Support For Computer Mouse User. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tai, Yee Ying (2019) Shielding Malaysia Digital Banking Reputation Through An Integrated Model Of Total Quality Management And Knowledge Management. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tajry, Mohammad Hafifi (2019) Study On Pile Machine To Improve The Construction Process Of Fakulti Kejuruteraan Pembuatan, UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Rasin, Zulhani and Mat Lazi, Jurifa and Rozali, Azzidin and Yahya Farah, Nabil Salem (2019) A New Simplified Rules Selection Method Of Fuzzy Logic Speed Control For Induction Motor Drive. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Talib, Nurul Farhanah (2019) Assessing the relationship between marketing mix and loyalty towards satisfactions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Ing Yuh (2019) Improving Rubber-To-Metal Bonding Through The Use Of Silane Coupling Agent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Jia Qi (2019) The influence of e-business adoption on business performance among micro-entrepreneurs. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Jia Ying (2019) Preference factors of cosmetic consumer towards customer satisfaction in beauty industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Joanne (2019) The impact of service quality on customer satisfaction in luxury hotel in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Joe Yee (2019) The Effect Of Lateral Lifting Tasks On Hand Grip And Pinch Strength Measurements. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Kae Chin (2019) The Effects Of Water Content Of Articular Cartilage On Biomechanical Properties And MRI Image. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Ming Yee (2019) Adhesion Integrity Of Epoxy Paste On Thermoplastic Polyurethane(TPU). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Pui Wen (2019) Study on the success factor of housing construction company performance by using financial key performance indicator in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Qin Hui (2019) Design And Characterization Of Led Light On Hydroponic Plant’s Growth Stimulation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Shezlin Annzi (2019) Smart Transportation System By Using IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Shin Wey (2019) The Criteria That Influence Integrated Marketing Communication (IMC) Towards Consumer’s Attention. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Shu Wen (2019) Factors influencing customers’ satisfaction towards their utilization on online food delivery service. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Siew Chen (2019) Disturbance Force Suppression In Linear Motor Drive System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Sirleen Siew Ying (2019) The relationship between MOOC content design and students’ performance among engineering students in Universiti Teknikal Malaysia Melaka (UTeM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Szi Hui (2019) Low Power Ultrasound Communication For Wireless Sensor Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Wai Theng (2019) Dimensions of service quality influence customers’ adoption towards digital banking. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Woan Chyi (2019) The Determinants Of Online Food Delivery Apps Among Food And Beverage Business Owners In Johor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Yan Hau (2019) The Printability Of The Conductive Polymer Epoxy Onto The Pet Flexible Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Yee Leong (2019) Investigation On Location Identification Methods For Iot Devices Using Bluetooth Low Energy (BLE). Project Report. UTeM, Melaka. (Submitted)

Tan, Yong Han (2019) Impact Test Simulation Of Automotive Wheel Rim Using Finite Element Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Zi Hao (2019) Shunt Active Power Filter Performance Based On Synchronous Reference Frame (SRF) For Different Load Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Zi Yi (2019) The factors that affecting consumer intention to utilise electronic payment system in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tang, Lea Hui (2019) Trust factors affecting the purchase intention in e-commerce towards skin care products. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tang, Wendy Hie Lin (2019) Smart Gardening System Powered By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Te, Jin Hang (2019) Design And Analysis Mini Hydro Power Turbine Blade. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tee, Kah Keat (2019) Design Of Secure Physical Unclonable Function. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teh, Hwee Chean (2019) Determinants influencing behavioral intention of using QR codes as marketing communication tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teh, Wei Yuan (2019) CFD Investigation Of Cross Flow Over Tube Banks. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teo, Lee Min (2019) The determinants of customer satisfaction of purchasing mass customized computer in Malacca. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teo, Shi Min (2019) Factors influencing the application of Green Technology Financing Scheme (GTFS) and business performance in selected green industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teo, Sin Yee (2019) Challenges of mobile banking towards product improvement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Termiti, Zarif Hasif (2019) Mechanical Properties Investigation On PLA And ABS Materials For Geospatial Topology Product Printed By Rapid Prototyping Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tey, Xue Qi (2019) Investigation Of Secret Knock Access System For IOT Based Smart Door Lock. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tham, Jie Yi (2019) Performance Comparison Between Different Type Of Evaporative Cooling Systems. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Thamil Selvan, Mogana Sundram (2019) Development Of Kitchen Gas Leakage Detection Using Arduino To Prevent Unplanned Tragedy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Thangavellah, Pavitharah (2019) Development Of Neuro IoT Pain Scale System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tie, Sing Chiong (2019) Automatic Door For Bird House Using Hybrid Power Supply. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ting, John Gabriel (2019) Design And Development Of Autonomous Underwater Vehicle (TUAH 4.0) For Underwater Monitoring Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Toh, Heng Fatt (2019) Design and development of remote control car using ESP32 CAM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Toh, Hui Lng (2019) The impact of characteristics of social networking sites toward customer buying decision. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tong, Ai Yee (2019) Opportunities and challenges for implementing automation among selected SMEs of food manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tuan Ab Razak, Tengku Farah Nurhidayu (2019) Improvement Of Smart Fertigation System Using Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

U

Universiti Teknikal Malaysia Melaka (2019) Aspirasi UTeM Bersama Naib Canselor. UNSPECIFIED. (Unpublished)

Universiti Teknikal Malaysia Melaka (2019) Majlis Anugerah Akademik Universiti 2019. Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Centre for Advanced Research on Energy (2019) CARe Newsletter. [Bulletin]

Universiti Teknikal Malaysia Melaka, Fakulti Kejuruteraan Elektrik (2019) Academic Handbook Session 2019/2020: Diploma & Bachelor Programmes, Faculty of Electrical Engineering. Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Fakulti Kejuruteraan Mekanikal (2019) Academic Handbook Session 2019/2020 For Bachelor Degree And Diploma Programmes: Faculty of Mechanical Engineering. Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Fakulti Kejuruteraan Pembuatan (2019) Academic Handbook 2019/2020: Faculty of Manufacturing Engineering. UNSPECIFIED.

Universiti Teknikal Malaysia Melaka, Fakulti Teknologi Kejuruteraan Elektrikal dan Elektronik (2019) Academic Handbook Session 2019/2020: Faculty of Electrical and Electronics Engineering Technology (FTKEE). Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Fakulti Teknologi Kejuruteraan Mekanikal dan Pembuatan (2019) Academic Handbook Session 2019/2020: Faculty of Mechanical and Manufacturing Engineering Technology (FTKMP). Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Fakulti Teknologi Kejuruteraan Mekanikal dan Pembuatan (2019) Academic Handbook Session 2019/2020: Faculty of Mechanical and Manufacturing Engineering Technology (Technology Programme). Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Fakulti Teknologi Maklumat dan Komunikasi (2019) Academic Handbook Session 2018/2019: Faculty of Information and Communication Technology. UNSPECIFIED.

Universiti Teknikal Malaysia Melaka, Fakulti Teknologi Maklumat dan Komunikasi (2019) Academic Handbook Session 2019/2020: Faculty of Information and Communication Technology. Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Pejabat Bendahari (2019) Manual Had Kuasa Kewangan Universiti Teknikal Malaysia Melaka. Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Pejabat Ketua Pegawai Maklumat (2019) RadiusCIO@UTeM. [Bulletin]

Universiti Teknikal Malaysia Melaka, Pejabat Pendaftar (2019) Peraturan Akademik & Panduan Sistem Peraturan Akademik : Program Sarjana Muda & Diploma. Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Pejabat Timbalan Naib Canselor (Akademik & Antarabangsa ) (2019) Akademia@UTeM. [Bulletin]

Universiti Teknikal Malaysia Melaka, Pusat Islam (2019) eBuletin Pusat Islam. [Bulletin]

Universiti Teknikal Malaysia Melaka, Pusat Pengajian Siswazah (2019) UPgrade@UTeM. [Bulletin]

Universiti Teknikal Malaysia Melaka, Pusat Pengurusan Penyelidikan Dan Inovasi (2019) Bulletin RICE@UTeM. [Bulletin]

Universiti Teknikal Malaysia Melaka, Pusat Pengurusan Penyelidikan Dan Inovasi (2019) Bulletin RICE@UTeM. [Bulletin]

V

Vejekumaran, Dharshini (2019) Optimization Parameters Of Injection Moulding Machine For Reducing Warpage On Polypropylene (PP) Dog Bone Part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Velasamy, Poobalan (2019) Development Of Home Electric Usage Notification & Monitoring System Using IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vellasamy, Yuwendran (2019) The Effect Of Bobbin Friction Stir Welding Repetition Process On The Microstructure Of The Aluminium Alloy 1100. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vincent Praboo, Joshua Dawson (2019) Development Of Intelligent Multipurpose Electronic Cane To Assist Physically Challenged Individual. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Viswanathan, Venuraj (2019) Tensile Test And Flexural Test Analysis For Banana Plant Stem Fiber Being Reinforced With Polyester Resin Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Vong, Hui Chon (2019) Firefly Algorithm With Application To Engineering Problems. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

W

Wahab, Amir Izzuddin (2019) The Characteristic Of The In-Cylinder Fluid Flow Of 1.6L Petrol Engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wai, Kai Xuan (2019) The impact of brand equity on customer purchase intention in UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Hanafi, Wan Muhamad Azam Fikry (2019) Design And Development Of Vertical Hydroponic System For Urban Community. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Hashim, Wan Ahmad Faiz (2019) Wideband Non-Linear Piezoelectric Vibration Energy Harvesting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Mohd, Wan Fakhruddin (2019) Comparison Of Tobacco And Electronic Cigarette Smoke Pollution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Norzuraidi, Wan Nurfadzlyn (2019) Visual Based Distance And Speed Estimation For Collision Avoidance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Omar, Wan Mohamad Syarifudin (2019) Synthesis Of Indium Zinc Oxide Via Sol Gel Method As Conductive Filler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Saharuddin, Wan Nurulhezaty (2019) Performance Of Copper Tungsten Electrode On Aluminium Alloys LM6 In Die Sinking Using Full Factorial Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Saiful Bahrin, Wan Zulhilmi (2019) The Functional Properties Of Silver/Carbon Nanotube Hybrid Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Shafie, Wan Muhammad Afiq (2019) Development Of Wireless Robot Controller By Using Arm Gesture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Umar, Wan Muhammad Atiq (2019) Development Of An IoT Integrated Smart Home Control And Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Zahari, Nurul Atilea (2019) Design And Analysis Of Naringin Concentration Sensing Based Side-Polished Polymer Optical Fiber (Pof). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wang, Lee Yoon (2019) Development Of An Electronic-Based Educational Game Board For Teaching Kindergarten Kid Basic Number Through Game Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wang, Tack Kuan (2019) Face Recognition Attendance System Using Deep Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Weng, Shih Ying (2019) Design And Analysis Of A Dual Function Of Switchable Resonator For RF Switch. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Choong Kin (2019) Development Of E-Beca Monitoring System Using Web-Based Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Grace Mee Sing (2019) Design And Development Of Underwater Thruster For Autonomous Underwater Vehicle (AUV). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Hui San (2019) Impact of e-service quality on customer satisfaction in Universiti Teknikal Malaysia, Melaka (UTeM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Jian Loong (2019) Multi Input ZVS Converter For Renewable Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Meng Meng (2019) Surface Modification Of Aluminium By Graphene Nanofiller Impregnation For Rubber-Aluminium Bonding System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Pei Yee (2019) Factors influencing e-loyalty in online shopping among digital natives. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Pit Yin (2019) An assessment of customer satisfaction using SERVQUAL model in Melaka halal hotel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Pui Kei (2019) Feasibility Study Of Adoption Pulsation Coolant On Cutting Force During End Milling Aluminium 6061. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Wai Leong (2019) Photovoltaic (PV) System Output Power Forecasting Using Support Vector Machines (SVM) Technique. Project Report. UTeM, Melaka. (Submitted)

Wong, Yee Mun (2019) The impact of industry 4.0 towards organizational performance in manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Yong Han (2019) Force Convection Flow And Thermal Analysis In Composite Curing Autoclave. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Yuin Shen (2019) Design And Analysis Of Selectable Multiband Isolation Using Single Switchable Resonator For RF Switch Application. Project Report. Faculty of Electronic and Computer Engineering, Melaka. (Submitted)

Woo, Ying Yee (2019) Analysis Of Sensor Accuracy On IoT Based Paddy Cropping Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Woon, Jun Jet (2019) Ergonomic Risk Assessment On Weight Lifter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Y

Yaakob, Mohamad Rizwan (2019) A Development Of Automatic Wire Cutter With Desired Length Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yahya, Aizad (2019) Design And Fabrication Of Vehicle Trainer Kit For Educational Purpose (Suspension System) With Aide Of Computer Aided Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yahya, Amirudin (2019) Investigation Of Hot Press Quenching On Hardness And Microstructure For High Strength Boron Steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yam, Fui Teng (2019) Green marketing practices among SMEs in Melaka and their impact on performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yaman, Muhammad Amirul Aliff (2019) Factor influencing adaption of cloud computing in SMEs business in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yap, Heng Yi (2019) Demand-Operated Plant Watering System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yap, Melissa Ching Hong (2019) The effectiveness of artificial intelligence (AI) through customer shopping experience in e-commerce Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yap, Sher Kee (2019) Automated Quality Inspection On Tile Border Detection Using Vision System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yeoh, Yee Jun (2019) Clustering Irradiance Values Using Unsupervised Machine Learning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeuw Hong, Yeoh (2019) The Design Of Wireless Power Transfer Technology For Autonomous Electrical Vehicles Using Class E Inverter Circuit: An Inductive Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yew, Junsin (2019) The Study Of Human Weight On The Biomechanical Behaviour Of Intervertebral Disc Using Finite Element Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yew, Sin Ru (2019) The Effects Of Water Content Of Articular Cartilage On Biomechanical Behaviour. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yong, Dun Xian (2019) Wireless control home appliances system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yong, Zhi Le (2019) The impact of negative electronic word of mouth (e-WOM) on the purchase decision of Malaysian digital natives. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yusaini, Mohammad Syafiq (2019) Development Of Cucumber Plant Control And Monitoring System Using IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusof, Mohd Amir Arif (2019) A Study On New Material Of Building Partition Wall Fabricated From Biocomposite Coconut Fiber-Based. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yusoff, Jannatul Firdaus (2019) Design Of Capacitive Power Transfer For Electric Vehicle Charging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusuf, Siti Maisarah (2019) The relationship between human resource management and innovative work behaviour : A study for employees in SME Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yuza, Nor Aqilah (2019) The Effect Of Copper (Cu) Electroplating Parameters On Copper Vertical Interconnect Access (VIA) Filling For Printed Circuit Board (PCB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zahari, Nor Zalikha Syafiqah (2019) Study the factors that influencing the acceptance of students toward e-learning system at public universities in Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zahari, Nur Izzati Farisha (2019) The relationship between employee engagement, affective commitment and retention. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zahid, Muhammad Zulhilmi Aidil (2019) Control System Design Of An Externally Guided Vehicle To Follow A Predetermined Path. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zahisham, Zuhayra Raihan (2019) Formulation Of Anti-Friction Biodegradable Grease Using Palm Oil With Addition Of Lithium Hydroxystearate And Zinc Diamyl Dithiocarbamate (ZDDC). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zahurin, Muhamad Shafiq (2019) Embedded System For Fleet Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaifulazhar, Nur Afrina Hazwani (2019) Examining The Impact Of Adopting Lean Production In Bakery Industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zaimi, Mohamad Qaiyum (2019) Development Of Regenerative Braking Simulator Using Pugh's Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal, Mohamad Firul (2019) Determinants of consumer purchasing behaviour towards water filter products in Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainal Abiddin, Nur Wajihah (2019) Electromagnetic Analysis Of Magnetic Gear Transmission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Abidin, Siti Nuradibah (2019) Surface Modification Of Mild Steel Using Powder Metallurgy (PM) CU Electrode. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Abidin, Zaheera and Ahmad, Rabiah and Abal Abas, Zuraida and Abdul Latip, Sheikh Faisal (2019) Feature Extraction Approach Based On Enhanced Antcolonyoptimization Algorithm For Higher Accuracy In Human Iris Identification. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainal Azali, Muhammad Nazmi (2019) Development Of A PCB Continuity Inspection System For Quality Control Using Computer Vision. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Roslan, Ilyana Amalin (2019) Vehicle Plate Detection System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainan, Muhammad Syazwan (2019) Design Of Pick And Place Mechanism For 3D PCB Assembly Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainuddin, Mohamad Zikri (2019) The study of customer satisfaction towards broadband services in Peninsular Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainuddin, Nurul Hazwani (2019) Lever Four-Bar Mechanism For All-Terrain Wheelchair. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainudin, Nur Lyiana (2019) Design And Implentation Of Gas Leakage Detection System For Home Safety Using IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainudin, Siti Hajar (2019) CFD Simulation Of Non-Newtonian Effect On Hemodynamics Characteristics Of Blood Flow. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainuri, Rosliza (2019) Development Of Smart Mist Spray On Stand Alone Mushroom House. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Ainin Sofiya (2019) Artificial Bee Colony Optimization Algorithm For Engineering Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Mohamad Noorsalem (2019) Development Of Low Cost Integrated Solar Panel Holder To Increase Solar PV Panel Efficiency. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Nur Amirah (2019) The effecting factors of radio frequency identification device (RFID) adoption in supply chain management. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Nurul Sabrina Syarfa (2019) Design And Analysis On New Mechanism Of Slipway Cradle For Alkahfi Asura Crew Boat. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakariah, Muhammad Nadzrin Zariq (2019) The Study Of Flank Wear Using Coated Alnova (A1CrN) Boron Steel (22MnB5) On Aluminium AA6061. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamree, Afif Fahmi (2019) 5’S Decision Support System For Lean Practitioners. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamri, Azzlyn Zurain (2019) Effect Of ZnO Nanowhiskers On The K0.5Na0.5NbO3 Thin Film Via The Hybrid Sol Gel Route. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zamri, Fazzuan (2019) Kinamatic Study Of 6 Degree Of Freedom Robot Based On Stepper Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamry, Anis Adibah Zamry (2019) Factors on turnover intentions in private sector at Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zawawi, Nurul Najwa (2019) Design And Development Of Interactive Children Educational Android Mobile Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zolkefle, Muhammad Zakki (2019) Improvement On Light Reflective Jacket To Increase Visibility Of Motorcyclist. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulhamri, Nur Syaza Syafiqah (2019) Automatic Vehicle Plate Recognition Using Template Matching. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkafle, Muhammad Zulfikri (2019) Experimental Study On Mechanical Behaviour Of Fused Deposition Modelling (FDM) Printed Parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkalnain, Mohd Asyraf (2019) Optimization Of Intruder Detection Algorithm Using Raspberry Pi Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkefle, Zulaikha (2019) Tensile Properties Analysis By Simulation And Experiment Of Thin Sheet Plate Welded By GMAW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkefley, Najihah (2019) Development of child’s car seat alarm system using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkefly, Muhammad Zawawi (2019) Numerical Study Of Thermal Enhancement In Microchannel Heat Sink With Applying Cavities Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Azmil Syafiq (2019) Development Of Smart Lock For Classroom Using NodeMCU ESP8266. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Nor Fairuz Safra (2019) Fatigue Performance Of Additive Manufactured Polymer With Different Composition Of Raw And Recycle Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Nor Syazana Adilah (2019) Study On CaCO₃ Mineral Filler Loading Effects Into SiR/CaCO₃ Based Composite As Dielectric Resonator For 5G Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulmahdi, Muhammad Arif (2019) Temperature Mapping Of Air Conditioning System In Classroom Using CFD Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zunaide, Mohamad Norezwan (2019) Analysis On Cutting Tool Performance In Milling Inconel 718 Under Minimum Quantity Lubrication (MQL) And Pulsation Lubrication System (PLS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)