Items where Year is 2013

Group by: Author | Item Type | No Grouping

Jump to: | ' | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z

Number of items: 791.

Aidy Akmal , Sabtu (2013) Trades subsystem for pin-it social network. Project Report. UTeM. (Submitted)

Raudhah , Zainal Rashid (2013) Thermal insulation particle board made with sugarcane bagasse fiber, kenaf core powder reinforced with polypropylene. Project Report. UTeM, Melaka. (Submitted)

Wan Idham , Wan Omar (2013) Design and development of ultrasonic reverse sensor. Project Report. UTeM. (Submitted)

Yuvarajan , Karathihayan (2013) Modelling of palm fibre polypropylene composite for randomly distributed fibre reinforcement. Project Report. UTeM, Melaka. (Submitted)

'

'Aishah, Hassan (2013) Fabrication Of Activated Carbon Filled Epoxidized Natural Rubber Composite Via Solvent Casting Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

Abbdul Faiz, Anuar (2013) Effect Of Injection Machine Parameters On The Warpage Of Dumbbell Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Basit , Kamaludin (2013) Pembentukan mendapan bahan bakar diesel dan bio-diesel pada suhu permukaan melebihi suhu Kadar Pengewapan Maksimum (MEP). Project Report. UTeM, Melaka. (Submitted)

Abdul Hafiz , Hashim (2013) To determine alkaline catalyst for the jatropha oil biodiesel production. Project Report. UTeM, Melaka. (Submitted)

Abdul Jabbar , Zamri (2013) Smart day and night lighting system using solar light ray reflection and deflection. Project Report. UTeM, Melaka. (Submitted)

Abdul Muhaimin , Mohd Shafie (2013) Wasted Heat Recovery System : How To Gain Energy. Project Report. UTeM, Melaka. (Submitted)

Abdul Rahim, Samsudin and Sivarao, Subramonian and Gannapathy, Vigneswara Rao and Wahyono Sapto, Widodo and Safiza Suhana, Kamal Baharin (2013) E-Preventive Maintenance Warning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Ahmad (2013) Design And Analyse The Configuration Of Earthing System Based On High-Low And Low-High Soil Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Talib, Din and Mustafar, Kadir and Roslina Aida , Rahimi and Fauzi, Khamis (2013) The Study on the Characteristics and Limitations of Pneumatic Lift for the Building of 4 Storey and Below, for the Development of a Low Cost and Safe Pneumatic Personal Lift. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdull Hanif , Abdull Rahman (2013) Microstructural Study On Different Type Of Biodiesel Fuel For Automotive. Project Report. UTeM, Melaka. (Submitted)

Abu Daud , Halip (2013) An investigation on the influence of double heat treatment process on round stainless steel bar. Project Report. UTeM. (Submitted)

Abu Naeem, Abdul Bahar (2013) Express Sole Dryer (ESD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Achmad Umar, Baraja (2013) The Enhancement Of UTeM International Student Website : How Content Can Be Presented Using Minimalist Responsive Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adam Farhan, Mohd Dasril (2013) Development Of Motor Speed Control System By Using Acceleration Characteristic At Forearm For Remote Control Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adli Zil Ikram , Abdullah (2013) Analysis the i beam subjected to three point loading or bending for different material. Project Report. UTeM, Melaka. (Submitted)

Adrian, Kh'ng Kean Chong (2013) Surface Electromyography Signal Classification For Human Computer Interaction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afiqah, Sabari (2013) Space Vector Pulse Width Modulation For Industrial. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afirah, Taufik (2013) An Intelligent System A Comparative Study Of Fuzzy C-Means And K-Means Clustering Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afizrul Iman, Mohamed (2013) Storage Water Tanks Cleaning Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Rabiah and Hussin, Burairah and Hasan Basari, Abd Samad and Yusof, Robiah and Ismail, Zuraini (2013) Developing A Hybrid Model By Integrating Informative Parameters In Information Security Risk Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Adlan, Zainal Ali (2013) HEPA Automated Filing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Al-Hakim, Shamsudin (2013) The Assessment Of Switchgear System Using Circuit Breaker Profiler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Alif , Azhar (2013) Job advertising subsystem for pin-it social network. Project Report. UTeM. (Submitted)

Ahmad Anwar , Mohamed Sabri (2013) Sistem Kawalan Brek Anti Kekunci (ABS). Project Report. UTeM, Melaka. (Submitted)

Ahmad Ashraf, Rawee (2013) Performance Analysis Of Video Call Application On Tablet Using 3G Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Harris, Abd Hamid (2013) Design Of A Low Cost Portable Heart Beats Monitor Using Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hilman Arif, Mustapa (2013) Online Conference Reservation Management System (onCRMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hisyamuddin , Hassan (2013) Novel EDM Screw Threading Technique Using Threaded Cavity Electrode. Project Report. UTeM, Melaka. (Submitted)

Ahmad Jamal, Salim and Soo, Yew Guan and Radi Husin, Ramlee (2013) Physiological Using FGPA In Health Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Kamely, Mohamad and Johny Purnomo, Joewono (2013) Performance Analysis Of Mechanical Properties And Weldment Area Of Aluminium Alloys. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Lutfi , Dahari (2013) Menilai prestasi enjin diesel menggunakan campuran minyak sayuran dengan diesel sebagai bahan api. Project Report. UTeM, Melaka. (Submitted)

Ahmad Mustafa, Ali (2013) A Study Of The Influence Of Cutting Parameter On Surface Roughness And Surface Morphology In High Speed Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nor Syahid, Hassan (2013) Self Organizing Map Technique For Transformers Condition Monitoring From SFRA Result. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Saufiyuddin, Razali (2013) Development Of A Map-Based Mobile Web Application With Mobile Payment Gateway For Public Transport Booking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syauqi, Hanas (2013) Peranti Pemadam Kebakaran Automatik Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusairi, Bani Hashim (2013) Development Of Open System And Application Mobile Platform For All Terrain Locomation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusoff, Hassan (2013) Majlis Perutusan Naib Canselor UTeM 2013. [Speech] (Submitted)

Ahmed Yaser, Mohd Zabawi (2013) M-Faraid Mobile Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ain Natasha, Marafi (2013) Design Of A Reactive Power Compensation For Transmission Line Voltage Sags Due To Faults. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aina Fairuz, Mohd Ariffin (2013) Paddy Field Irrigation Control System By Using Programmable Logic Control (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aini Noor Liana, Azmi (2013) Prediction Of Propagation Path Loss Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishah Illani, Sulaiman (2013) Wearable Microstrip Patch Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akalili, Abdullah (2013) Blood Bank Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmarina Izza, Mokeri (2013) Smart Parking Via RFID Tag. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alagendran, Andiappan (2013) Developing Lean - EMS Integration Database For Sustaining ISO 14000 Certification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alfred, Pun Khee Seong (2013) The Relationship Between Human Resource Information System (HRIS) And Human Resource Management (HRM). Project Report. UTeM, Melaka. (Submitted)

Aliaa Syahirah, Abd Rashid (2013) Analysis Of Android Malware (Droidkungfu 2) Through Their Behavior Using Static Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aliff Fahmi , Radzi (2013) Green technology of synthetic rubber for the future tire. Project Report. UTeM. (Submitted)

Amerul Aeyraff, Mustapa (2013) Design and development for iBook : the concept of multimedia, sound and video. Project Report. UTeM. (Submitted)

Amiruddin , Shahipurullah (2013) Investigation Of Extracting Oil From Waste Palm Fruit Fibre. Project Report. UTeM, Melaka. (Submitted)

Amirul Asyraf, Mat Nasir (2013) Preparation And Characterization Of Green Rubber Foam From Reclaimed Rubber Glove. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirullah , Amran (2013) Bahan api pepejal daripada sisa bahan buangan industri minyak kelapa sawit. Project Report. UTeM, Melaka. (Submitted)

Amjad Saddar , Md. Isa (2013) Pembangunan Sistem Kuasa Penggerak Hibrid Elektrik Untuk Kenderaan Dua Alam UTeM. Project Report. UTeM, Melaka. (Submitted)

Anas Mujahid, Mohammad Khair (2013) Mechanical Behaviour & Water Absorption Of Metal Matrix Composite (TN+Rice Husk) Fabricated Via Permanent Mould Casting - ( Experiment with 10% And 25% Of Rice Husk). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Ling Yuen (2013) Simulation Of Intelligent PID Temperature Controller. Project Report. UTeM, Melaka. (Submitted)

Ang, Soon Chang (2013) Design And Development Of Tactile Detection By Using RFID Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aninorbaniyah, Bairan (2013) The effects of carbon nanotube on the properties of graphite-carbon black-polypropylene composite for bipolar plate. Project Report. UTeM. (Submitted)

Anis Niza, Ramani (2013) Design and Analysis Electrical Energy form Clay Soil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Jaafar and Muhammad Noorazlan Shah, Zainudin and Mohd Muzafar, Ismail (2013) Modelling And Analysis Of Bit-Communication Behaviour In Artificial Swarm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuarulnam, Ramli (2013) Counterfeit Banknote Detection & Counting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aqmal, Hashim (2013) Remanufacturing Analysis By Using Failure Mode And Effects Analysis (FMEA) For Engine Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arbaeyah, Abdul Razak (2013) Optical Solitons Simulation In Single Mode Optical Fiber Over 40GB/S. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ardika Ridal, Awang (2013) The investigation of turbo generator on exhaust manifold in spark ignition engine. Project Report. UTeM, Melaka. (Submitted)

Arham Syafiq , Azmi (2013) Mechanical properties of polyperties of polypropylene filled wood fiber composites. Project Report. UTeM. (Submitted)

Arief, Mostapah (2013) Design Of S-band Microstrip Bandpass Filter For S-Band Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ashafi'e , Mustafa (2013) Tribological properties of nanoparticles as lubricating oil additives. Project Report. UTeM, Melaka. (Submitted)

Asok Max , Subramaniam (2013) Active Suspension Control Of Ground Vehicle Heave And Pitch Motion. Project Report. UTeM, Melaka. (Submitted)

Auni Zahidah , Mohd Zanggi (2013) Factors Affecting Job Satisfaction To Increase Performance Of Workers At Syarikat Air Terengganu (SATU) Daerah Hulu Terengganu. Project Report. UTeM, Melaka. (Submitted)

Ayu Natasya , Kasim (2013) Effects of bf length on the properties of bamboo/polypropylene composite. Project Report. UTeM. (Submitted)

Ayuni Fateehah , Muda (2013) Novel structure method for punch through current in decanano MOSFET. Project Report. UTeM. (Submitted)

Azizul Asri , Subbi (2013) Mobile robot using GPS module. Project Report. UTeM. (Submitted)

Azlinda, Mohamad (2013) Optimization Of Injector Gun Design Using Design For Manufacturing And Assembly (DFMA) At The Conceptual Design Stage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmirah , Mohammad (2013) Relationship Between Entrepreneurial Characeristic And Tendency To Become An Entrepreneur. Project Report. UTeM, Melaka. (Submitted)

Azrina, Abdul Halim (2013) Process Of Abrasive Grinding Computer Numerical Control (CNC) Machine To Grind Tooling And Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul Hafez , Mohamad (2013) Study Of Design And Fabricate Driving Simulator. Project Report. UTeM, Melaka. (Submitted)

B

Badrul Hisham, Ahmad (2013) Design Of Switchable Matched Bandstop Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bong, Yu Jing (2013) Responsive attendance system based on thumb scanning. Project Report. UTeM. (Submitted)

C

Chai, Siao Ling (2013) The Segmentation Of Satellite Image Using Region-Based And Watershed Transform Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Zhi Hao (2013) Development Of Self-Powered Dual-Axis Solar Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Boon Huan (2013) An investigation of nose shape design for high speed train using the concept of Kingfisher bird's beak /. Project Report. UTeM. (Submitted)

Chang, Ling Kwai (2013) Portable Physiotheraphy Limbs Rehabilitation Robot - Structural Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Yee Mun (2013) Modelling and experimental investigation on perforated plate mobility. Project Report. UTeM, Melaka. (Submitted)

Chee Fai, Tan and Sarban Singh, Ranjit Singh (2013) Design And Development Of An Interactive Concurrent Engineering Design System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, Kar Lock (2013) GSM Based Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Clement Kuan You (2013) Voice Recognition Robotic Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Pooi Ching (2013) Preparation Of Spent Tea Leaves Filled Polyurethane Composites For Sustainable Sound Absorbing Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Xin Yan (2013) High Rise Building Alert System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Francis Jun Hau (2013) Robust Positioning Control Of Magnetic Levitation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Kooi Lim (2013) Design on fall detection system using Micro-Electro-Mechanical System (MEMS) accelerometer and gyroscope. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Ci Ling (2013) Self-energize and wireless network mini information display board system. Project Report. UTeM. (Submitted)

Choo, Hui Hui (2013) A Study Of Work Postures And Grip Force For Carpal Tunnel Syndrome (CTS) Among Workers In Aero Space Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chow, Kok Lin (2013) Biometric Voice Recognition In Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choy, Min Yee (2013) Quick Response Code Technology For Marketing Purpose : Improving Tracking Code From Barcode. Project Report. UTeM, Melaka. (Submitted)

Chua, Pei Yong (2013) Reconfigurable Dual Polarization Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Zhi Yen (2013) Tea Trading System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chuah, Peng Peng (2013) Labor Cost System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chwa, Shie Huan (2013) Zigbee-Based Smart Fall Detection And Notification System With Wearable Sensor E-Safe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

Dhivya, Selvakumaran (2013) A Comparison Study Of Synchronization Measures In Accessing The Neural. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

Eddy Saufi, Husni (2013) Electronic Medical Assistant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eliakim, Che Yaakob (2013) To Design And Develop Islanding Detection Interface System For PV Connected Microgrid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eliyana, Ruslan (2013) Uplink Radio Access Point With Radio Over Fiber Technology For Picocell System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elysa Sakinah , Md. Amin (2013) Development Of Image Filtering System For Car Sticker Detection. Project Report. UTeM, Melaka. (Submitted)

Eng, Wei Sy (2013) Merging Of Writer Identification Technology Into Mobile Application For Forensic Document Handwriting Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fadzil , Che Man (2013) Development Of Automated-Guided Vehicle For 300kg Trolley Towing Application. Project Report. UTeM, Melaka. (Submitted)

Fahmi , Samat (2013) Design of conceptual smart trash can. Project Report. UTeM. (Submitted)

Fairuz Fazillah, Shuhimi (2013) The effects of stainless steel on the properties of graphite-polypropylene composite for bipolar plate. Project Report. UTeM. (Submitted)

Faizatul Hanim, Rahmat (2013) Traffic Light Led Fault Monitoring And Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizil, Wasbari (2013) Enhancing Eco-Friendly Hydraulic Technology: The Development Of Low Pressure Water Hydraulic Manipulator For Small And Medium Industries In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizil, Wasbari (2013) Study Of Heat Exchanger Effects On Car Air - Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fakrulradzi, Idris (2013) Deployment And Performance Analysis Of Wifi Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Sharidah, Ab. Gafor (2013) Automatic Toilet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faris Adam , Mohd Ghazali (2013) Mobile Robot Motion Planning Based On Notion Of Artificial Potential Field (APF). Project Report. UTeM, Melaka. (Submitted)

Farlister Glenn, Gainus (2013) Feasibilty Study In Implementing Of Microgrid By Using Fuel Cells. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatehah Hanim, Ahmad Othman (2013) Forecasting Plant Vigor Through Vegetation Index Mapping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Nabilah, Rosly (2013) Design And Analysis Of Polypropylene Plastic Name Card Holder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong, Yan Li (2013) Quality Investigation Of Laser Wood Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Ming Yee (2013) Modeling Complex And Dynamic Real Life Scenario. Project Report. UTeM, Melaka. (Submitted)

Fu, Fang Xiong (2013) CFD Of Liquefied Natural Gas (LNG) behaviour during tank filling. Project Report. UTeM, Melaka. (Submitted)

G

Goh, Zia Huey (2013) Performance Characterization Of Photo Materials Used In Silicon Technology Fabrication Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

H'ng, Zhuang Wei (2013) Design Of Operational Counting Device. Project Report. UTeM, Melaka. (Submitted)

Hafini Suhana , Ithnin (2013) The Process Of Performance Appraisal To Improve Employee's Satisfaction At Company XYZ. Project Report. UTeM, Melaka. (Submitted)

Hafizin , Hanipah (2013) Design And Development Of A Protable Spark Plug Tester For Motocycle User. Project Report. UTeM, Melaka. (Submitted)

Hafizuddin, Zuhaimi (2013) The Effect Of Different Heat Treatment On Surface Retrogression On Aluminum Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hani Abdul Hakim , Abdul Kader (2013) Impact Of Kenaf Towards Enhancing Organizational Performance : A Study In Manufacturing Organization. Project Report. UTeM, Melaka. (Submitted)

Hanif, Asha'ri (2013) Design And Machining Of Aerospace Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanipah, Hussin (2013) Micro teaching for technical education. [Video] (Submitted)

Hanipah, Hussin and Anas, Abd Latiff (2013) Innovation and Creativity Showcase: “The Commercialization of Research Project and Intellectual Property Assets”. Project Report. AKePT.

Hanipah , Hussin (2013) Life success coach training & certification program. Project Report. Coaching For Success : Life Success Program. (Submitted)

Hareshwara Ruban , Subramaniam (2013) Modelling For Prediction And Optimization Of Mechanical Response Of Unequal Thickness Steel Sheet Resistance Spot Welds In Tensile-Shear Loading Condition. Project Report. UTeM, Melaka. (Submitted)

Harindravel, Letchumanan (2013) Mobile Robot Surveillance System With GPS Tracking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasoloan Haery, Ian Pieter and Muhammad Yuhazri, Yaakob (2013) Developing A Function Deployment And Tool For Employees And Product Quality Satisfacti Through Kano Method And Herzberg Theory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Muhammad Zahir and Sakidin, Hamzah (2013) Working with supervisors. Other. Penerbit Universiti Teknikal Malaysia Melaka, UTeM.

Hazalifah , Zainal Abidin (2013) Tribological properties of waste vegetable oil biodiesel using-alkaline-based potassium hydroxide (KOH) catalyst. Project Report. UTeM, Melaka. (Submitted)

Hazwan Hasif, Hamdan (2013) The Effect Of Crude Oil To The Corrosion Properties Of Petroleum Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazwani, Hilmi (2013) Effect Of Mixing Ratio On The Mechanical Properties Of Polypropylene Composite. Project Report. UTeM, Melaka. (Submitted)

Hee, Shieh Li (2013) Improving Sensing System For Mailbox Monitoring Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Heng , Seok Teik (2013) Design of a dynamic vibration absorber. Project Report. UTeM. (Submitted)

Ho , Pei Nee (2013) The art of storytelling and video editing : what does it take for NGO's to educate public using short video effectively? Project Report. UTeM. (Submitted)

Huzaifah, Mohd Fauzi (2013) Development wireless Radio Frequency Identification (RFID) connector to reduce the use of wire hamess in order to minimize frequents connection failure. Project Report. UTeM. (Submitted)

Huzairee, Abdul Halim (2013) Investigation Magnetic Field Radiated By 132 kV Overhead Transmission Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Ida Laila , Bakhtiar (2013) DFMA Analysis Of A Water Tank Cleaning Robot. Project Report. UTeM, Melaka. (Submitted)

Ida Syafiza, Md Isa (2013) Development Of New Arp Routing Protocol For Multihop Transmission In Ad Hoc IEEE 802.11 Networks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idzuan, Ibrahim (2013) Network Optimization Of IKN. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Iffa Marina , Jopri (2013) Effect of heat treatment on the microstructures and mechanical properties of high carbon steel. Project Report. UTeM, Melaka. (Submitted)

Ilham Hadi , Syahril (2013) Evaluation Of Dynamic Characteristics On PRT And Thermocouple Sensors In An Automated Temperature Calibration System. Project Report. UTeM, Melaka. (Submitted)

Imran, Ibrahim (2013) School Attendance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irwan, Saari (2013) Image Transmission Over Wireless Sensor Network (TEST BED ANALYSIS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Jaaffar (2013) Design The Auto Depth Control For Unmanned Underwater Vehicle Control Using Thruster System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail , Ibrahim (2013) Motion And Time Study For Enhancing The Assembly Process At PHN Industry Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Ismatuzzulfa, Shahrowardi (2013) Compact Dual Band FSS For Microwave Transmission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ivan, Gian (2013) Design Analysis Of High Heel Shoes To Improve Energy Absorption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izni Hidayah, Mohamed Asri (2013) A Study Of Car’s Profile Design Using Boxfish’s Aerodynamic Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzati , Ghasali (2013) Key Success Factors Of Entrepreneurship Education Towards Undergraduate Students Of Faculty Of Technology Management And Technopreneurship (FPTT). Project Report. UTeM, Melaka. (Submitted)

Izzul Hazwan , Amir (2013) Strengthening of aluminium alloy 6061 by using precipitation hardening heat treatment. Project Report. UTeM. (Submitted)

J

Jamiatul Adawiah , Ab. Sidek (2013) Heat transfer characteristics of a heat exchanger. Project Report. UTeM, Melaka. (Submitted)

Janisa , Aldean (2013) Total Design Of A Portable Automation Training Kit. Project Report. UTeM, Melaka. (Submitted)

Jawatankuasa Latihan Bersama Institusi Pengajian Tinggi Awam (2013) Buletin Jaluma. [Bulletin]

Jeeva, Kumar (2013) Investigate Android Malware’s Behaviour Through Dynamic Analysis (Anserverbot). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jimmy , Saman (2013) Attaining Balanced Ecosystem By Going Green : The Relationships Between Trainer's Instructional Design And Behavior Of Trainer : A Study Case On Permai Rainforest Resort. Project Report. UTeM, Melaka. (Submitted)

Jordan, Keith Ogak (2013) Finite element simulation of a rolling process of aluminium. Project Report. UTeM, Melaka. (Submitted)

Joseph Rangga , Lium (2013) Design Improvements On Small Scale Production System. Project Report. UTeM, Melaka. (Submitted)

Joye, Ter Ji-Xi (2013) Object Locator For People With Dementia (DEMICATOR). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juani Eyat, Ju Leng Jun (2013) Teaching Autism Kids Good Behavior Using 2D Animation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juhari, Ab. Razak (2013) Optimization Of Cross - Flow Turbine For Pico - Hydro System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kalaivani, Ramachandran (2013) Automated Control System For Tomato Plantation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Hisyam , Muhamad (2013) Evaluation of diesel engine performance and emissions using blended biodiesel (waste chicken fat) and conventional diesel. Project Report. UTeM, Melaka. (Submitted)

Kamarulhelmy , Talib (2013) Optimization Of Mechanical Coupling In Electric Vehicle (ev). Project Report. UTeM, Melaka. (Submitted)

Kang , Wei Sheng (2013) Universal Remote Control For Home Appliance With Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kaodawaton, Abd Malik (2013) The Interpretation Of Dissolved Gas Analysis (DGA) Using Fuzzy Logic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kartikesu, Vijayan (2013) The Design Of A Torque Feedback Controller Using PID Controller For An Upper Limb Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kew, Mun Yew (2013) Development of Glove Controlled Prosthetic Hand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Amzar , Mohd Kassim (2013) Design and fabrication of thrower mechanism for tennis ball machine. Project Report. UTeM, Melaka. (Submitted)

Khairul Nizam, Kamaruddin (2013) Solar Tracker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulannuar, Abdul Satar (2013) Parabolic Dish Stirling Engine With Single Axes Solar Tracker System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalil Rushdi, Abdul Ghafar (2013) Pressure Monitoring System Interfaced With Global System For Mobile Communication (GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kho , Wei Lip (2013) Mobile chinese dictionary application enhanced with augmented reality (AR) : WORDAR. Project Report. UTeM. (Submitted)

Khoo, Thean Heng (2013) Emergency Vehicle Siren Detection For Traffic Light Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Hooi Khee (2013) Disturbance Observer-Based Motion Control Of Direct Drive Motors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Shuin Chin (2013) Tyre trading management system. Project Report. UTeM. (Submitted)

Kismera , Mohamed Amin (2013) Radiator cleaning equipment. Project Report. UTeM, Melaka. (Submitted)

Koay, Soon Lee (2013) Investigating DroidKungfu4 Android Malware Behavior Through Dynamic Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Swee Leong (2013) Piezoelectric Sensing Application Focused On Accelerometer Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Swee Leong (2013) Wireless Monitoring For Ambient Vibrations: Investigate Potential Ambient Vibration Source For Energy Harvesting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Si Mun (2013) Web-Database System For Health Insurance Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Wei Shen (2013) Design And Fabrication Of A Reduced Scale Tire Test Machine. Project Report. UTeM, Melaka. (Submitted)

Kow, Kok Lim (2013) Development Of Active Suspension For Passenger Car. Project Report. UTeM, Melaka. (Submitted)

L

Lai, Qili (2013) Development Of Four Wheel Steering For Vehicle Handling Enhancement. Project Report. UTeM, Melaka. (Submitted)

Lee, Kin Fei (2013) A Comparison Of Type-1 Fuzzy And Type-2 Fuzzy Methods In Anfis Modelling To Analyze FTSE Bursa Malaysia Kuala Lumpur Composite Index. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kin Wai (2013) Electrical Power Consumption Monitoring System And Computing Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kok Tai (2013) Modeling, Simulation And Validation Of Reduced Scale Vehicle Dynamics Model. Project Report. UTeM, Melaka. (Submitted)

Lee, Yeat Fui (2013) The Effectiveness Of Delivery System And Product Information In Web To Increase Electronic Sales In Tesco Melaka. Project Report. UTeM, Melaka. (Submitted)

Lee, Yee Fong (2013) Reconfigurable Feed Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Shu Teng (2013) Performance Analysis Of Mineral Fibre Reinforced Polypropylene. Project Report. UTeM, Melaka. (Submitted)

Leong, Man Hong (2013) Bluetooth Remote Home Automation System Using Windows And Android Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leow, Thing Fung (2013) Satellite Image Classification Using Fuzzy Logic Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lia Asmira, Abdul Halim (2013) Three-Phase Balanced Voltage SAGS Mitigation By Using Voltage Compensator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lie, , Ken Nie (2013) The rolling effect in mechanical properties of 316L stainless steel for implant materials. Project Report. UTeM, Melaka. (Submitted)

Liew, Jyi Haow (2013) Visualeyes : An Interactive Learning Tool To Ameliorate 3D Animation Skills Refining And Promote Self-Learning For Novice Animators. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Kean Fei (2013) Design Of A Comfortable Bus Passenger Seat. Project Report. UTeM, Melaka. (Submitted)

Liew, Sheau Ping (2013) Implementation Of Network Communication For Utility Pole Maintenance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Siaw Hong (2013) EEG Signal Classification Using Fuzzy-Rough Nearest Neighbours (FRNN) Model For Person Authentication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Nicholas Boon Yew (2013) Automatic Fall Detection And Notification System Via Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chee An (2013) Ironman Project - Design Of Electro-Mechanical Muscle For Elbow Exoskeleton Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Da Ping (2013) Simulation And Measurement For Indoor Air Flow. Project Report. UTeM, Melaka. (Submitted)

Lim, Jia Yin (2013) Automatic Crash Notification Via Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Kar Yie (2013) Exploration On ZigBee In Wireless Body Area Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Si Qing (2013) Design And Analysis Of Natural Fiber-Metal Matrix Composites For Engineering Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Wan Xi (2013) Reconfigurable Slot Antenna For Dual Band Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Wei Jun (2013) Care Money Android Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Ching Sheng (2013) Railway Vehicle Dynamics And Vibration Analysis. Project Report. UTeM, Melaka. (Submitted)

Liyana, Muhamad Ali (2013) The Effect Of Colouring Agent On The Corrosion Properties Of Glass Composite Tiles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liz Sharaziman , Ramli (2013) E-commerce And M-Commerce : Awareness And Acceptance Among Malay Entrepreneurs In Malaysia. Project Report. UTeM, Melaka. (Submitted)

Lo, Chun Ho (2013) Mykids Portfolio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Mun Chui (2013) Performance Analysis Of Mineral Fibre Reinforced Polyethylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, , Xiao Hui (2013) Effect of heat treatment on hardness and impact strength of stainless steel. Project Report. UTeM, Melaka. (Submitted)

Loo, Lok Siang (2013) e-FireXIT - A Smart Route Decision Making System To Emergency Exit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Looi , Jia Wei (2013) Care U Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low , Jun Keat (2013) Investigating golddream android malware behavior through dynamic analysis. Project Report. UTeM. (Submitted)

Loy, Soo Ling (2013) Satellite image compression using run-length encoding and huffman encoding techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Mahanum, Mohd Zamberi and Nortazi, Sanusi and Ernie, Mat Tokit and Zakiah, Abd Halim and Mohd Azli, Salim (2013) The Importance Of Industrial Training Program Towards Students Holistic Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maisarah, Abu Bakar Assari (2013) Eco Saver Mower (ESM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maisarah, Abu (2013) Designing Artifical Magnetic Conductor Using Bendable Substrate For RFID Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marhazli , Kipli (2013) Traffic (routing and auto-tracking) subsystem for pin-it social network. Project Report. UTeM. (Submitted)

Mariam Naaila, Md Hanapi (2013) Measuring Using Augmented Reality Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mark , Fidelis Kensin (2013) Voice Recognition Ignition System. Project Report. UTeM, Melaka. (Submitted)

Mazidah, Mazri (2013) Effect Of Thickness On Mechanical Properties Of Plywood Honeycomb Core. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazizi , Mohamed (2013) Emisi prestasi enjin diesel menggunakan campuran biodiesel sawit dengan bahan aditif sebagai bahan api. Project Report. UTeM, Melaka. (Submitted)

Md Afindi, Muhammad (2013) Fabrication And Characterizations Of Hydroxyapatite (HA) / Chitosan (CTS) Composite Layer Onto Titanium Alloy (Ti-6AL-4V) Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Megat Ahmad Haziq, Ahmad Zabidi (2013) Reprocessing Waste Tyre For New Product Potential. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mod Hussin, Erni Suhadah and Hasan, Hazmilah and Hashim, Rahman and Abd. Jalil, Razali and Jumbri, Isma Addi and Buang, Noraini (2013) Inovasi Merekayasa Keunikan : Terbitan Khas 2013. Penerbit Universiti, Durian Tunggal. ISBN 9789670257297

Mohamad, Minhat (2013) Development Of A STEP-NC Controller System Framework And Implementation In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Afiq, Shawaldin (2013) Investigate Surface Integrity When Machining FC300 Cast Iron Using Uncoated Carbide Ball End Mill - Study Of Subsurface Micrograph. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Aisamudin , Shuhaimi (2013) Effect of carbon black on the properties of graphite-epoxy composite for bipolar plate. Project Report. UTeM, Melaka. (Submitted)

Mohamad Azwan, Mohamed Sakri (2013) Academic Marking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fahmi, Mohamad Noh (2013) Short Circuit Current Protection Scheme In 500kV Transmission System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fikri, Nasir (2013) Development Of Slicing Machine Using Integrated Approach (Total Design). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ibrahim, Mohd Farid (2013) EZ Homestay. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Idzhar, Ya'akub (2013) UTeM Curriculum Vitae System (UTeMCV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Izzat Afifi, Yasin (2013) Comparison Of Classic And Motion Tween Techniques In 2D Animation Global Warming. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Razif, Mohd Jabar (2013) Simulation Of Displacement Control For Piezoelectric Actuator Using PID Controller (electronic resource). Project Report. UTeM, Melaka. (Submitted)

Mohamad Ridwan , Ramli (2013) Cutter Path Strategy For Machining Craniofacial Medical Implant PEEK Composite. Project Report. UTeM, Melaka. (Submitted)

Mohamad Syafiq , Mokhtar (2013) The effect of heat treatment on the microstructures and mechanical properties of copper alloy. Project Report. UTeM, Melaka. (Submitted)

Mohamad Zaharudin , Sariman (2013) Position Tracking Of Slider Crank Mechanism By Using PID Controller. Project Report. UTeM, Melaka. (Submitted)

Mohamad Zuric Adham , Mat Esa (2013) Alat Penghilang Sakit Belakang. Project Report. UTeM, Melaka. (Submitted)

Mohamed Nazri, Chemiran (2013) Autofilling Form Use At FKEKK. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Aizrulshah, Kamaruddin (2013) Design And Optimization Of Runner And Gating Systems For The Permanent Mold Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Azrol, Ahmad (2013) Dual Maximum Power Point Tracking : Focus On Dynamic MPPT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Faisal, Ismail (2013) Secure And Wireless Student Attendance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafizuddin , Shammuin (2013) Insulation materials for home residence building wall. Project Report. UTeM, Melaka. (Submitted)

Mohammad Haiqal , Supaat (2013) Simulation of mixed convection in a channel with a cavity heated from different side using fluent. Project Report. UTeM, Melaka. (Submitted)

Mohammad Nazry , Rosley (2013) Total design of Water Tank Leaning Robot (WATCLEAR). Project Report. UTeM, Melaka. (Submitted)

Mohammad Shahin , Mansor (2013) Simulation of soot movement in diesel engine. Project Report. UTeM. (Submitted)

Mohammed Nasser, Ahmed (2013) Automated Kids Tracking System Using Androids (KiTSA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Rozi , Hamid (2013) Finite element micromechanical modeling of aluminium magnesium alloy during plastic deformation. Project Report. UTeM. (Submitted)

Mohammed Umar-Hassan, Mohammed Rosdi (2013) Glove Control Helicopter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohanraj, Letchimenan (2013) Design And Develop An Integrated Utility System (Energy Meter). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ali, Rosli (2013) Wear Behavior of Carbon Nanotube (CNT)Short Natural Fiber Reinforced Epoxy Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ameer Aiman , Ruhaizi (2013) Improving stability of water based nanocarbon using OH-CNT modifield with polyvinyl pyrrolidone as a dispersing agent. Project Report. UTeM, Melaka. (Submitted)

Mohd Amirul Asyraf, Mohd Zakhi (2013) Preparation And Characterization Of Thin Hard Density Board From Paddy Husk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Arif , Zaulkefli (2013) Acustic of mosque : the effect of roof shape on it's acoustic performance. Project Report. UTeM. (Submitted)

Mohd Ariff, Radzuan (2013) Stable Walking Motion NAO Humanoid Robot Using Cubic Polynomial Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azarul Syazari , Che Aziz (2013) The effects of ice formation on airfoil performance. Project Report. UTeM, Melaka. (Submitted)

Mohd Azhar , Ramli (2013) Smoke opacity meter via gsm. Project Report. UTeM. (Submitted)

Mohd Azlan, Ahmad (2013) Water Tank Level Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan, Mior Hamdan (2013) X-Band Filter Using Parallel Coupled-Line Technique With DGS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman Syafiq , Yusof (2013) Development Of A Pick And Place Table Top Sized Robot Cell. Project Report. UTeM, Melaka. (Submitted)

Mohd Badrun, Yusof (2013) Development Of Remotely Operated Underwater Vehicle Maneuvers Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Bakri , Ismail (2013) Regenerate of decanter cake from palm oil mill waste effluent for the removal of heavy metal ions from industrial wastewater. Project Report. UTeM, Melaka. (Submitted)

Mohd Ermin Alif, Norsani (2013) Human Motion Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzli, Talib (2013) Design And Analysis Of Production Tooling Using Computational Fluid Dynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahame, Che Daud (2013) Influence Of Cutting Condition On Product Quality When Cutting Aluminum Alloys. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi Adli , Salahuddin (2013) Investigation on diesel engine performance using the second generation of biodiesel and its blend /. Project Report. UTeM. (Submitted)

Mohd Faizal , Mohd Pauzi (2013) Tailored Orbital Welding Of Dissimilar Stainless Steels Material. Project Report. UTeM, Melaka. (Submitted)

Mohd Fakhruddin, Abdullah (2013) Corrosion Failure Analysis Of Weldment Area At Internal Surface Of Carbon Steel Pipe Used In Oil And Gas Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fareez, Mohd Afif (2013) Smart Parking System Using Wireless Connectivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fareez , Abdul Rahman (2013) Merekabentuk Dan Membangunkan Sistem Pembersihan Kendiri Bagi Peralatan Penuaian Air Hujan. Project Report. UTeM, Melaka. (Submitted)

Mohd Farid , Mohd Yusof (2013) Cloud storage subsystem for pin-it social network. Project Report. UTeM. (Submitted)

Mohd Fazlan, Ali (2013) Battery Management System For Solar Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fidha Uddin , Alias (2013) Boxy Aircraft Component CNC Lathe Machining- Haas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Jamaludin (2013) Prediction of helical gear life using wear debris analysis. Project Report. UTeM, Melaka. (Submitted)

Mohd Hafiszudin , Ahmad (2013) Design And Fabrication Of Ball Feeder Mechanism And Body For Tennis Ball Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd Hafiz, Sulaiman (2013) Design Of Shallow Source / Drain Extension (SDE) Profiles In Improving Short Channel Effect (SCES) In Nanoscale Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Mohamad Kassim (2013) Bangunan penyejuk solar pasif. Project Report. UTeM, Melaka. (Submitted)

Mohd Hanafi, Md Rasul (2013) Development Of Space Vector Modulator For 3-Phase Voltage Source Inverter (VSI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hazwan, Mohamed Harith (2013) Home Mailbox Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hazwan Sharif, Hassan (2013) A Study On Effect of Environment Stressor (Indoor Air Quality And Noise) On Workers Performing In SMI Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hilman , Kamaruzaman (2013) Thermal comfort study for student laboratory. Project Report. UTeM, Melaka. (Submitted)

Mohd Idham Khalid , Abu Hasan (2013) Numerical study of fluid and heat transfer in mixing elbow. Project Report. UTeM. (Submitted)

Mohd Idzwan, Othman (2013) Localization And Positioning via Wi-Fi Signals. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ikhwan, Ismail (2013) The Construction Of Crosstalk’s Testing Apparatus For Teaching And Learning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jazlan, Mohd Jahari (2013) A Study On Psychophysical To Enhancing Comfortability Among Occupational Driver In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Al'fat'hah , Izman (2013) Fencing Improvement At Palm Oil Mill To Reduce Costly Waste. Project Report. UTeM, Melaka. (Submitted)

Mohd Khairul Mazni , Mohamad (2013) Comparative study on stability of nanofluid using two different dispering agents. Project Report. UTeM, Melaka. (Submitted)

Mohd Khairur Rahim , Awang (2013) Start Stop System. Project Report. UTeM, Melaka. (Submitted)

Mohd Khairy, Ismail (2013) Greenhouse Monitoring Using Wireless Sensor Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Lutfi , Azmy (2013) Impact of carbonization process on briquette from palm oil residue. Project Report. UTeM, Melaka. (Submitted)

Mohd Luthfi , Omar (2013) Effect of using the second generation biodiesel and its blend in the compression ignition engines. Project Report. UTeM, Melaka. (Submitted)

Mohd Muzafar, Ismail and Mohd Azlishah, Othman and Muhammad Norazlan Shah, Zainudin and Ridza Azri, Ramlee and Maizatul Alice, Meor Said (2013) An Electromagnetic Field Effect On A Human Cell. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nabil Fikri, Hanif (2013) Effect Of Electrical Grounding Of Substrate On The Magnetron Sputtering Of Titanium Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nabil Imran, Kamaruzaman (2013) Design Of Antenna At 1.8Hz With Rectifying Circuit For RF Energy Harvesting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazrin, Jusoh (2013) WVOM (Wide View Object Movement) Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Alif Ikhwan, Baharom (2013) Comparison Of Productivity Of Small Scale Industry Using Stopwatch Time Study And Cost Benefit Analysis Of Productivity Improvement Project. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Azmi , Mohd Tarmiji (2013) Biodiesel production from waste vegetables oil using catalyzed transesterification. Project Report. UTeM, Melaka. (Submitted)

Mohd Nor Effendy, Nek Man (2013) Engineering Analysis On Spreader Beam By Using Manual Calculation And Solidworks Simulation Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Iftikhar, Makhtar (2013) Mailbox Notification Via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nur Shafiq , Ahmad Razimi (2013) Co-processing of coconut shell and sugarcane residue as solid biofuel. Project Report. UTeM, Melaka. (Submitted)

Mohd Razali, Muhamad (2013) Deposition And Characterization Of Tin Coated PVD Sputtering Of Magnetized Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridhwan, Salamun (2013) Additive Manufacturing For Ergonomic Improvement Of Knee Support Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzwanil Hanif, Ruslan (2013) Materials Selection For Conceptual Automotive Hood Design Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rizal, Ahmad Saroni (2013) Experimental Study On Ground Resistance Reduction Based On Earth Electrode. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rusydi , Rosli (2013) The Uses Of Trade Secret In The Technological Based Company. Project Report. UTeM, Melaka. (Submitted)

Mohd Ruzaini, Arshad (2013) Islamic Learning (IS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shafiq Izwan, Yahaya (2013) Development Effective Permittivity Algorithm For Conformal Structure In 3D Finite Different Time Domain (FDTD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahardey, Abd Rahim (2013) Design Of Die For Hot Press Forming In Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahib, Ab Aziz (2013) MYKAD Detector For Alcohol Vending Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahril, Abdul Razak (2013) Development Of 3D Finite-Difference Time-Domain (FDTD) Algorithm In Matlab For Dielectric Resonator Antenna Radiation Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shazni , Halid (2013) Kenderaan Dua Alam UTeM : Analisa Pengendalian Dan Pemanduan. Project Report. UTeM, Melaka. (Submitted)

Mohd Syafiq Shaik, Abdul Aziz (2013) Development Of Cooling System In Hot Press Forming For Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahir, Abdul Rashid (2013) Man-Machine Optimization (MMO) For Technicians In Semiconductor Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syawal , Sulaiman (2013) Investigation of electric motorcycle performance in UTeM Kampus Induk. Project Report. UTeM, Melaka. (Submitted)

Mohd Syazman , Jaafar (2013) Laser Machining Of Waste Plastic Products. Project Report. UTeM, Melaka. (Submitted)

Mohd Yuhazri, Yaakob and Kamarul, Amir Mohamed and Hasoloan Haery, Ian Pieter (2013) Design Of A Thermal Efficent Heat Collector. Project Report. UTeM. (Submitted)

Mohd Zaid, Awang (2013) Effects Of Workpiece And Tool Rigidity On Machining Performances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaidi, Ahmad Sofian (2013) Automated Platform For Component Selection For Designing Manufacturing System Facility. Project Report. UTeM, Melaka. (Submitted)

Mohd Zulhilmi, Ahmad (2013) Development Of 3D Game Learning For Critical Thinking Technique : Mr. Right Hat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Fizree, Zainal Abidin (2013) Investigate Surface Integrity When Machining FC300 Cast Iron Using Uncoated Carbide Ball End Mill : Study Of Surface Profile. Project Report. UTeM, Melaka. (Submitted)

Muazatul Adweah, Ghazali (2013) Closed Loop DC-DC Converter For LED Driver Circuit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mufidah Dalila, Marof (2013) Improving Efficiency Of Inventory System - A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Afiq, Bachok (2013) Design A PID Controller For An Activated Sludge Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Aliff, Noordin (2013) Thermoelectric Powered High Temperature Using Boost Converter With Supercapacitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Arif, Azizan (2013) Cyclic Voltammetry Analysis Of Carbon-Based Electrochemical Capacitor In 1M H2 SO4. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Ariffuddin, Mohd Noh (2013) Mini Water Buoy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Daleel , Mohd Idros (2013) Optimization Design Of Slicing Machine Using Design Of Manufacturing And Assembly (DFMA) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Fariq, Ahmad (2013) Remote Measurement Of Wearable Sensor Using ZigBee. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Firdaus, Jusoh (2013) Security Equipment Using Biometrics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Firdaus , Abd. Rashid (2013) Relationship of hofstede's dimensional culture towards performance (financial) of Melaka SME's service sector company. Project Report. UTeM. (Submitted)

Muhamad Haffiz, Mohd Radzi (2013) Design Of A Low Cost Accelerometer Measuring Ambient Vibration Using Piezoelectric Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Haffizi , Kamaruddin (2013) The relationship between performance appraisal and employee's performance. Project Report. UTeM. (Submitted)

Muhamad Hafizul, Mamat (2013) Service Marketing : The Effects Of Website Usability Towards Customer Satisfaction By Examining The Website Usability As Marketing Channel. Project Report. UTeM, Melaka. (Submitted)

Muhamad Idzuan , Omar Maat (2013) Development of rainwater storage tank for residential area. Project Report. UTeM, Melaka. (Submitted)

Muhamad Kamal Hafiz, Mohd Anuar (2013) Thermoelectric Powered High Temperature Using Boost Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Suffian Sikandar, Gani (2013) Smart Post Box System With RF Technology And GSM Modem. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Syafiq, Md Najib (2013) Investigation on oil palm fiber composite mechanical properties. Project Report. UTeM, Melaka. (Submitted)

Muhamad Tarmizi , Adnan (2013) Vehicle collision detector (vcd). Project Report. UTeM. (Submitted)

Muhammad Abdusshukur, Amat Jupri (2013) Surge Arrester Modeling - A Comparison Between Different Models For 500KV Transmission Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afiq, Yusof (2013) Development Of Prototype Sugar Cane Juice Extraction Machine (mechanical). Project Report. UTeM, Melaka. (Submitted)

Muhammad Afiq Fikri, Zainal (2013) Investigation And Study Sensor To Power Saving In Fke Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afzan, Azman (2013) Qualification admission to university (Get-U). Project Report. UTeM. (Submitted)

Muhammad Aiman, Ahmad Nordin (2013) The Design And Development Of Sign Language Translator Using Web Technology (Sign Language Translator). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aiman, Jamal Mohamed (2013) Home Controlling System By Using Voice Recognition (Via ZigBee). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aimi, Abu Hassan (2013) Application Of AHP Method In The Design Of Remanufacturing Improvement Processes For Crankshaft. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aizat, Abd Rahim (2013) A Study And Analysis Of Consumer Product Design Using The Integration Of Kano Model And Quality Function Deployment - Case Study (Product Shampoo Bottle). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Akmal Akif , Muhammad Wazir (2013) Experimental of flow measurement over different shape of cavities for low reynolds number. Project Report. UTeM. (Submitted)

Muhammad Alif Ridzuan, Rashid (2013) Energy Management For Hybrid PV-Wind System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Amir Afham, Huslan (2013) The Success Factors Of Entrepreneurs In Photography Industry. Project Report. UTeM, Melaka. (Submitted)

Muhammad Amir Lufti, Radzali (2013) Development Of Single-Wheeled Balancing Scooter. Project Report. UTeM, Melaka. (Submitted)

Muhammad Asy Syaheed, Abdullah (2013) Effect Of Resin Ratio On Mechanical Properties Of Resin Bonded Sand Mould. Project Report. UTeM, Melaka. (Submitted)

Muhammad Audi Aufa, Sallehuddin (2013) Smart Exhibition By Using Near Field Communication (NFC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aufa , Mohd Uzir (2013) Modular Design Of Fourth Generation For Fire Fighting Ground Vehicle. Project Report. UTeM, Melaka. (Submitted)

Muhammad Azlan Shahariman , Ahmad (2013) Auto Silent Mode For Android Smartphones. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Bukhari, Kamarozaman (2013) Surveillance Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Danial Asyraf , Zahari (2013) Merekabentuk Dan Menguji Radiator Automotif Berbentuk Bulat. Project Report. UTeM, Melaka. (Submitted)

Muhammad Fahmi , Md Isa (2013) Rekabentuk Dan Fabrikasi Sistem Stering Dan Brek Kenderaan Dua Alam UTeM. Project Report. UTeM, Melaka. (Submitted)

Muhammad Faisal , Zaidi (2013) Pengauditan jumlah pembaziran tenaga elektrik di dalam bilik kuliah di UTeM. Project Report. UTeM. (Submitted)

Muhammad Faiz , Othman (2013) The design and fabrication of hydraulic boom trainer with gripper attachment. Project Report. UTeM, Melaka. (Submitted)

Muhammad Faizal, Md Ali (2013) Automatic Lamp Illumination System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faizh , Sazali (2013) Effects Of Cutting Parameter On Machining Performance For Wood-Plastic Composite Material. Project Report. UTeM, Melaka. (Submitted)

Muhammad Fakhrur Radzi , Sa'adon (2013) Carbonisation temperature effect on preparation of biochar from tanduk banana peel residue (musa paradisiaca fa. corniculata) as a solid biofuel. Project Report. UTeM, Melaka. (Submitted)

Muhammad Faqrul Reduan , Abdul Majid (2013) Novel EDM Thread Whirling Technique For Orthopedic Medical Screw Implant Application. Project Report. UTeM, Melaka. (Submitted)

Muhammad Farhan, Wan Jamaludin (2013) Comparison Between Fluorescent Lamp And Led Lamp Using AC Supply. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fuad , Abdul Hadib (2013) The Relationship Between Human Resource Management And Organizational Performance. Project Report. UTeM, Melaka. (Submitted)

Muhammad Haffizal , Bahrom (2013) The Application Of Old And New Seven QC Tools For Achieve Cost Saving In Malaysian Manufacturing. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hafiz, Samsudin (2013) Fabrication And Analysis Of Joining Parts For Oil And Gas Piping System. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hafiz , Abd Rahim (2013) Flow modelling of simplified human nasal cavity by using Computational Fluid Dynamics (CFD). Project Report. UTeM, Melaka. (Submitted)

Muhammad Hannan, Kamarzaman (2013) Study And Analysis Of The Engineering Quality Feelings Based On Affective Response To Dimensional Integration Of Product Shapes Design Case Study [Product - Spectacles]. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hazwan, Arzmi (2013) An Integration Of Affective Engineering In Product Design Analysis - [The Using Of Kano Model With Kansei Engineering For Evaluating The Design Product) - Case Study] (Product - Pen). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hazwan , Ruslan (2013) Energy From Heat Using Heat Recovery Module. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hilmi Ruzaini , Hashim (2013) Investigation on the effect of recycling palm fiber composite on the mechanical properties. Project Report. UTeM, Melaka. (Submitted)

Muhammad Husnan , Zainal Abdin (2013) Enhancing Material Supply System For Improving The Flow Process Of Assembly Line. Project Report. UTeM, Melaka. (Submitted)

Muhammad Iqbal, Sazali (2013) Value Stream Mapping Using Simulation Towards Lean Manufacturing At Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izwan, Ahmad Fuad (2013) Home Electrical Energy Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izzat , Zainal Abidin (2013) The Implementation Of E-Marketing By Using Search Engine Optimization Strategy As Marketing Tool To Increase Sales Of Health Products In Blogs. Project Report. UTeM, Melaka. (Submitted)

Muhammad Khairul Nizam, Saaey (2013) Effect Of Particulate Reinforcement On The Wear Properties Of Mg-Al Nano Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Mursyid, Roslan (2013) Investigation of Voice of Customers on Hybrid Powered Household Equipment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Muzakkir, Basar @ Sabtu (2013) Home Energy Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nur, Othman and Mohd Shahrieel, Mohd Aras and Fadilah, Abd Azis and Ahmad Nizam, Jamaludin and Mohd Faruq, Abdul Latif (2013) Design A Novel Thruster Magnetism Motor (TMM) For Underwater Vehicle Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Razman, Zulkefli (2013) Learning Keris With Augmented Reality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ridhwan , Johari (2013) Development And Design Analysis Of Experimental Rig To Identify Piezoelectric Actuator's Transfer Function. Project Report. UTeM, Melaka. (Submitted)

Muhammad Sharil, Yahaya and Norhafiz, Salim and Aminurrashid, Noordin and Nurul Ain , Mohd Said and Muhamad Faizal, Yaakob (2013) Stand-Alone Hybrid Photovoltaic-Wind Generation System: Practical Based Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shukri , Ahmad Azazi (2013) Design Optimization Study On The Formula Varsity Car Chassis. Project Report. UTeM, Melaka. (Submitted)

Muhammad Syafiq, Mhd Hussain (2013) Advance Smartphone Classroom Android Application System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, Mohd Kamal (2013) Study On The Characteristic Of Current Distribution On Water Due To Short Medium Spark Gap. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, Syed Mohamed and Reduan, Mat Dan and Adi, Saptari and Mohamad Lutfi, Dolhalit (2013) Objective And Subjective Assessments Of Vibrating Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, Yusuf (2013) Portable Water Level Indicator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Thoriq, Mohamad Zaid (2013) Integrated Electricity Meter And Cost Calculator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yahya, Hamdzani (2013) Gas Leakage And Fire Alert Warning System Via GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yusri , Md Yusuf (2013) Effect of stanum on the properties of graphite-stanum composite for bipolar plate. Project Report. UTeM. (Submitted)

Muhammad Zaim, Azamam (2013) Characterization Of Epoxidised Natural Rubber Ethylene Propylene Diene Monomer (ENR-EPDM) Blend Prepared Via Solution Mixing In Toluene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zikrillah , Yunus (2013) CFD analysis of heat source from electric vehicle battery system. Project Report. UTeM. (Submitted)

Muhammad Zuhair Bolqiah, Edris (2013) SIRIM Counterfeit Sticker Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zulhaizer, Ab Rashid (2013) Design Of Thermoelectric Energy Harvester Using LTC 3108 Boost Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zulhakim, Sharudin (2013) Contaminant removal for different geometry of cavities with high Reynolds number using fluent. Project Report. UTeM, Melaka. (Submitted)

Muhammad Zulhilmi, Jamil (2013) KalimahAR : Augmented Reality Mobile Translator Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Khairi, Abd Rahim (2013) Implementation Of Direct Torque Control Of Induction Machines Utilizing ezDSP F28335 And FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Zulpattah , Mohd Yusoff (2013) Transition Of Engine Powered Air-Conditioning System To The Solar Powered Air-Conditioning System In A Bus : A Feasibility study. Project Report. UTeM, Melaka. (Submitted)

Munirah, Mohd Aris (2013) Optimization Of Performace Of VoIP Across WLAN, WiMAX And Integrated WLAN-WIMAX Networks Using OPNET MODELER. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musthafah, Mohd. Tahir and Muhammad Zahir, Hassan and Noreffendy, Tamaldin and Safarudin Gazali, Herawan (2013) Design and Analyze Possible Energy for a Heat Recovery System in Passenger Car Engine Compartment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muzaffar, Mohamad (2013) Mini Spy Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muzalifah , Mohd Said and Afifah Maheran, Abdul Hamid and Zul Atfyi Fauzan, Mohamed Napiah and Norhidayah, Mohamad Yatim and Zarina , Mohd Noh (2013) Design And Analysis An Ultra Thin Diaphragm Of Optical Pressure Sensor For In-Vivo Medical Diagnosis And Therapy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muzalifah , Mohd Said and Afifah Maheran, Abdul Hamid and Zul Atfyi Fauzan, Mohammed Napiah and Nurliyana , Abd Mutalib and Nur Fatihah, Azmi (2013) Study And Modelling High-K Material For Nanoscale Gate CMOS Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Nabil Fikri , Ahmad (2013) Fuel characteristics of biodiesel from waste vegetables oil using alkaline based catalysts. Project Report. UTeM, Melaka. (Submitted)

Nabila, Ruslan (2013) Performance Analysis Of Video Conferencing Software In Technology 802.11N. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nabila Farhana , Mohamad Isa (2013) Sustaining Competitive Advantage Through Marketing Strategy : Case Study Of MCIS Safety Glass Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Nadia, Baharuddin (2013) An Analysis Of Heartbeat Monitoring Using Microwave Doppler Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nadiah, Hussin (2013) Kukuh Saya Dan Cekap Matematik Tahap 1 : Teknik Interaktif. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Naim Hadi , Darsono (2013) Optimization of decentralize network for resource sharing. Project Report. UTeM. (Submitted)

Najmiah Radiah, Mohamad (2013) Analytical Study Of Light And Liquid Crystals Reorientation In Anistropic Photonic Crystals Using One-Dimension Finite Difference Time Domain (FDTD) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nalini , Subramaniam (2013) Managing 5S In Malaysian Automotive Industry. Project Report. UTeM, Melaka. (Submitted)

Nattni, Ainim (2013) Developing Accelerometer Sensor System For Instantaneous Mapping Acceleration Of 1DOF Elbow Joint For Exoskeleton Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazirah, Makhtar (2013) Design And Characterization Of Vertical Strained Silicon MOSFET Incorporating Dielectric Pocket By Using TCAD Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazrin, Othman (2013) Shopping Cart Anti-Theft Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazrul Affendi, Che Ibrahim (2013) Modeling 3D Wings Like Object Based On Finite-Different Time-Domain (FDTD) Method In Graphical User Interface For Radar Cross Section (RCS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazuha, Shaari (2013) Narrow Band Field Measurement Generated By Lightning Flashes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Neoh , Thiam Hwa (2013) Design and simulation of die and punch for sheet metal on bending. Project Report. UTeM. (Submitted)

Ng, Rhun Hock (2013) Modeling And Analysis Of Swine Skin Biometrics Found On Leather Products. Project Report. UTeM, Melaka. (Submitted)

Ng, Bee Tyng (2013) Productivity Improvement By Using Lean Six Sigma Approach (A Case Study At Furniture Company). Project Report. UTeM, Melaka. (Submitted)

Ng, Sze Ling (2013) Design And Simulation Of Three Dimensional Bending Machine. Project Report. UTeM, Melaka. (Submitted)

Ng, Tech Chyan (2013) Augmented reality art book with interaction to promote Malaysia traditional game. Project Report. UTeM. (Submitted)

Ng , Sing Liang (2013) Cartoon avenger mobile application. Project Report. UTeM. (Submitted)

Ng, , Wei Tat (2013) The evaluation of machinability and surface roughness in conventional milling machine. Project Report. UTeM, Melaka. (Submitted)

Nik Nursyifa , Nik Mohd Fauzi (2013) The effectiveness of advertisement types to student's perception in fast food Restaurants of McDonald's Sdn. Bhd. Project Report. UTeM. (Submitted)

Noor Anis, Baharudin (2013) Bijak Kira Matematik Tahap 1 : Metafora Permainan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Ashikin , Jamil (2013) The effect of heat treatment on the microstructure and mechanical properties of 6061 aluminium alloy. Project Report. UTeM, Melaka. (Submitted)

Noor Ashikin , Yusof@Yusoh (2013) A Study To TQM Implementation In Minimizing Products Rejection : The Case Of BI Technologies Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Noor Athira, Abidullah (2013) Design And Development Of Real Time Power Quality Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azamiah, Md Fauzi (2013) Design Of Nonlinear Frequency Selective Limiter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azliana , Saari (2013) The Effectiveness Of Selection Method On Seeking Talent. Project Report. UTeM, Melaka. (Submitted)

Noor Azrie Izzati, Noor Azman (2013) Effect Of The Video Resolution On Quality Of Experience In Wireless Multimedia Streaming. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Baizura , Muhammad (2013) Customer Satisfaction Towards Service Quality Of Staffs At Fast Food Restaurant In Melaka. Project Report. UTeM, Melaka. (Submitted)

Noor Emma, Ismail (2013) Social Impact Of Customer Acceptance To Technology Innovation In Melaka. Project Report. UTeM, Melaka. (Submitted)

Noor Fareeza , Amran Samsudin (2013) Simulation Design On Water Level Control System. Project Report. UTeM, Melaka. (Submitted)

Noor Fatin, Ab Abas (2013) Analysis Of Bending And Straight Waveguide Using Matlab And Graphical User Interface (GUI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Idayu, Ahmad (2013) In Hub Of Switch Reluctance Motor Design For Arm Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nooraisyah, Arasid (2013) Three Bit Subtraction Circuit Via Field Programmable Gate Array (FPGA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nooranith Shazni , Khairul Azuar (2013) Prototyping A Miniature Airborne Robot. Project Report. UTeM, Melaka. (Submitted)

Noorasikin, Abdul Rahman (2013) A Study On The Key Criteria That Contribute To The Manufacturing Company Sustainability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorfaizol, Mohamad Noor (2013) Fabrication Of Titanium Dioxide (TiO2) By High Temperature Oxidation Of Physical Vapour Deposition (PVD) Titanium Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorshahirah , Masat (2013) Simulation Design On Water Flow Control System. Project Report. UTeM, Melaka. (Submitted)

Noorzalika, Mohammed Ghazali (2013) Value Creation Research And Development (R&D). Project Report. UTeM, Melaka. (Submitted)

Nor Abidah, Abdul Aziz (2013) The Potential Of Epoxidized Natural Rubber As Hydrophobic Contributor In Biodegrdable Urea Fertilizer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Affendy, Norizan (2013) A Study And Analysis Of Product Design And Development Using Kansei Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Afifah, Mat Nawi (2013) Effect Of The Video Encoding Scheme On Battery Consumption Of Mobile Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Aqilah, Sumadi (2013) Matematik Tahap 1 : 2D Animasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Arliza, Abdullah (2013) Developing A Wireless Penetration Testing Tool In Linux Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Asmaa Alyaa, Nor Azlan (2013) Assessment Of Manufacturing Facility Layout Using Systematic Layout Planning (SLP) Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Asmida, Husin (2013) Implementing The Quality Improvement Initiatives To Enhance The Performance Of employees : The Case Of BI Technologies Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Nor Atiqah , Jaafar Sidek (2013) Effect Of EDM Die Sinking Parameters On The Material Characteristics Of Aluminium Alloy LM6 Using Graphite Electrode. Project Report. UTeM, Melaka. (Submitted)

Nor Faizah, Haminudin (2013) Effect Of Nanoclay Loading On Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Farahani, Jusoh (2013) Monitoring DNS Traffic Through Google Maps. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Farhyne , Mohd Kamil (2013) Identifying The Key Successful Factors In Franchise Business Among Entrepreneurs : A Case Study In Seremban Negeri Sembilan. Project Report. UTeM, Melaka. (Submitted)

Nor Fariha, Sohod (2013) Thermal Behavior Of Natural Fiber Mat Hybrid Composite For Tooling Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Fazielah , Darwis (2013) Preliminary Investigation Of Laser Joining. Project Report. UTeM, Melaka. (Submitted)

Nor Haizatul Akma, Mohd Yusof (2013) Mobile application based learning : mari belajar solat. Project Report. UTeM. (Submitted)

Nor Halida Ilyani, Kamarudin (2013) Effect Of EDM Die-Sinking Parameters On The Material Characteristics Of Aluminium Alloy LM6 Using Cooper Tungsten. Project Report. UTeM, Melaka. (Submitted)

Nor Hazwani , Musa (2013) The Relationship Between Job Stress Level And Job Satisfaction Level Of Teachers : A Case Study At Sek. Men. Kebangsaan Sri Muar, Johor. Project Report. UTeM, Melaka. (Submitted)

Nor Rafika, Nor Hamid (2013) Identification Of Intermetallic Compound At Cu Wire – Al Bond Pad Interface By Using X-Ray Diffraction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Shahirah, Aladdin (2013) Productivity Improvement Through Application Of Lean Manufacturing Concept : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Syamimi , Zulkifli (2013) Driving license application (DriveApps). Project Report. UTeM. (Submitted)

Nor Syazwani , Mohd Ridzun (2013) Numerical modelling of 1-dimensional wave equation using finite difference scheme. Project Report. UTeM, Melaka. (Submitted)

Nor Syazwani Haziqah, Abdul Rahman (2013) Properties Of Chemically Modified Graphene Through Thermal, Compositional And Morphological Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor'Ain, Ibrahim (2013) Intelligence RF Traffic Light Control For Ambulance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noraida, Abdul Aziz (2013) Investigation Of Influence Of Slender Cutting Tool And Cutting Parameters On Product Quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noraidah, Blar (2013) Development Of An Automatic Rewinding Machine For Cable Tape Considering Affective Analysis. Project Report. UTeM, Melaka. (Submitted)

Noraina, Abdullah (2013) Power Stability Optimization On Grid Connected With Solar And Wind Energy Harvesting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noraini, Sulaiman (2013) Surface Integrity of Aluminium Lm6 Alloy When Machine with the High Speed Steel and Uncoated Carbide Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norairin, Mahmat Sani (2013) Energy Detection Method In Cognitive Radio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norashikin, Zainal (2013) Flow Process Improvement Through Simulation In Electrical Part Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norasiken , Bakar and Hyreil Anuar, Kasdirin and Faaizah, Shahbodin and Rabiah, Ahmad and Sazilah, Salam (2013) 3D Courseware For UTeM Student : Electromagnetic Subject. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noratikah, Azhar (2013) Interaction Between Virtual Object And Real Environment (Learning Alphabet Using Augmented Reality). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazlin, Ajali (2013) Large Scale Heat Treatment Of Aluminium Alloy 1050 H24 For Forming Process. Project Report. UTeM, Melaka. (Submitted)

Norazlinda , Ibrahim (2013) Ecar UTeM. Project Report. UTeM. (Submitted)

Nordiyanna, Norazemi (2013) Modeling of Stress Developed During Intermetallic Compound Growth at Cu Wire–Al Bond Pad Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norezmi, Md Jamal (2013) Piezoelectric Storing Circuit Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norfauzan, Rahman (2013) Automatic Accident Detector And Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhakeem, Mustapa (2013) Fire Fighting Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhidayah, Mohamad Yatim and Noor Mazlina, Mahmod and Lizawati, Salahuddin and Nor Haslinda, Ismail and Muhammad Noorazlan Shah, Zainudin (2013) Preschool Children Safety Network With Message Service System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norizatulhuda , Razali (2013) Managing Conflict In Cross Functional Project Teams : Case Study At Modenas. Project Report. UTeM, Melaka. (Submitted)

Norlia, Badri (2013) Notification System For Medicine Kit Using GSM Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norsha Hira, Abdul Ghani (2013) Machine Tool Rigidity When Turning Using Varies Length And Diameter Of Workpiece. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norshafika , Rahmat (2013) A Case Study Of Cross-Functional Teamwork Factors In Determining New Product Performance In Mitsubishi Electric (Malaysia) Sendirian Berhad. Project Report. UTeM, Melaka. (Submitted)

Norshuhada , Ahmad Dayarbi (2013) Malaysia Food Manufacturing Strategy In Achieving Sustainable Performance : A Case Of Jalen Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Nur Adilah, Ismail (2013) Identifying The Perception Of Consumer Behavior Towards The Hybrid Car. Project Report. UTeM, Melaka. (Submitted)

Nur Afiqah, Abdul Latif (2013) Application Of 7QC Tools To Improve Yield Performance Of Label Stock Product At ABC Company Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ainne, Hazemi (2013) RFID Based Smart Ordering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aizat, Embok Cheni (2013) The Development Of Static Diving System Using Ballast Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Al Hafizuddin , Mohd Arabai (2013) Stamp forming behaviour of palm fiber composite. Project Report. UTeM, Melaka. (Submitted)

Nur Amira, Ahmad Faiz (2013) Balanced Mixer Design For Wimax Tranceiver Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ani, Nasrudin (2013) Design And Simulation Of Dc-Dc Switching Boost Converter For Current Ripple Reduction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aqilah, Ya'kob (2013) Synthesis And Characterization Of Light Weight Natural Foam From CSM Coconut Fiber Filled Polyurethane For Acoustic Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asilah, Mastuki (2013) A Customer Affective Quality Analysis Using Analytical Hierarchy Process (AHP) In The Product Development Case Study (Product - Pen). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Azila, Awang Md Isa (2013) Modeling Planar Inverted F Antenna Based On 3D Finite Difference-Time Domain (FDTD) Method In Grapichal User Interface (GUI) For Radiation Pattern Evaluation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Azri, Mahmud (2013) Key Success Factors In Business Incubation Among Incubators In Malaysia. Project Report. UTeM, Melaka. (Submitted)

Nur E'zzati, Md Faisol (2013) Hypermarket Products Search Mobile Application (Android). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farahin, Mohd Hayat@Ahmad (2013) A Study Of Working Posture And Psychophysical Experience In Stamping Die Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fatehah , Harun (2013) The Optimization Of Warehouse Management System (WMS) To Increase The Efficiency & Effectiveness Of Production Process In An Automotive Company. Project Report. UTeM, Melaka. (Submitted)

Nur Hamirudin , Ismail (2013) 3D animation with stereoscopic 3D : silent killer. Project Report. UTeM. (Submitted)

Nur Haziq Hilmi, Adzhar (2013) Performance analysis of existing in the market the so called "energy saving device". Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hazwani, Janudin (2013) An Investigation Of Electromagnetic Effect On Human Cell. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hidayah, Mahmud (2013) Designing 2.45GHZ Rectenna For Low Voltage Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hidayah, Mohd Amir (2013) Automated Egg Incubator (AEI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ilmi , Mohamad Roslan (2013) A Non-Destructive Test Crack Detection Method Using Vibration Acoustic On Aluminium Plate. Project Report. UTeM, Melaka. (Submitted)

Nur Ilyana, Roslan (2013) Case Study For Improvement On Led Testing Equipment Using Statistical Process Control At OSRAM OPTO Semiconductor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izni, Roslan (2013) Initial Observation Of Energy Conversion By Using Rectenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izzati Nadzirah , Harun (2013) Sexual harassment and its implication on performance : a study of private organization. Project Report. UTeM. (Submitted)

Nur Mysarah , Mohd Nasir (2013) The Consumer's Personal Environmental Awareness Towards Sustainable Marketing Program At TESCO, Melaka. Project Report. UTeM, Melaka. (Submitted)

Nur Nabila, Mahazid (2013) Effect Of Different Atmosphere For Different Sintering Temperature On Physical And Mechanical Properties Of Sub Micron WC-Co Powder Through The Powder Metallurgy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Nabilah Farhana, Sulaiman (2013) Surface Integrity Of Aluminum Alloy LM6 When Machine With Coated High Speed Steel And Coated Carbide Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Sabrina , Basharuddin (2013) A study on the effects of parameters for optimizing biodiesel production. Project Report. UTeM, Melaka. (Submitted)

Nur Sakinah, Abdul Razak (2013) GPS Lock. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Shahidah , Abdissalam (2013) Redesign And Development Of Automatically Adjustable Rostrum. Project Report. UTeM, Melaka. (Submitted)

Nur Sufiah Akmala, Ramdan (2013) Estimation Of Configuration Workspace For A Robot-Controlled Vision Inspection System. Project Report. UTeM, Melaka. (Submitted)

Nur Suhaila, Muhammad (2013) Preparation Of Recycling Chip Aluminium (Al 6061) Through Powder Metallurgy Route. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syafiqah, Abdul Rahim (2013) Risk Assessment On Palm Oil Industry Jobs Using HIRARC Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syaheera, Ahmad (2013) Ergonomic Design Of Computer Numerical Control Milling Machine Using Quality Function Deployment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syuhada, Hasimuddin (2013) Ergonomic Development Of Shoe Sole Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur'Ain, Fadzil (2013) Mobile Application For Children With Autism : Mari Membasuh Tangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuradila , Harun (2013) Analysis Of Wave Amplitude Modulation Effect For Various Crack Lengths In Vibro Acoustic Inspection Method Simulation Approach. Project Report. UTeM, Melaka. (Submitted)

Nurain, Othman (2013) Analysis Of Power Consumption By Using Programmable Logic Controller (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuraini , Abd Latif (2013) Ergonomics Design Of Baby Carrier. Project Report. UTeM, Melaka. (Submitted)

Nuramalina, Mat Serah (2013) Change Detection On Klang Area Using Landsat S-TM Data. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurashikin , Mohammad Yusof (2013) Analysing Consumer Behaviour On Development Of Digital Water Meter (DDWM) In Market Place : Malacca. Project Report. UTeM, Melaka. (Submitted)

Nuraslinda, Adnan (2013) Effect Of Terrain Features On Wave Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfah Nabilah , Mohd Fadzil (2013) The Impacts Of Industrial Training Program Towards Enhancing The Performance Of Undergraduate Students. Project Report. UTeM, Melaka. (Submitted)

Nurfarah Ain, Abd Razak (2013) Analysis Of Winding And Core Types To The Performance Of The High Frequency Transformer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfarahana, Simun (2013) Evaluation Of Psychophysical Experience And Heart Rate Of Malaysian Female While Manual Lifting Activities. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfarahin , Sulaiman (2013) Improvements Of Wheel Nuts Remover. Project Report. UTeM, Melaka. (Submitted)

Nurfatin Zayani, Sahar (2013) Online Virtual Classroom. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhafizah, Ismail (2013) Analisis Dinamik Kereta Lumba "Formula Varsity 2012". Project Report. UTeM, Melaka. (Submitted)

Nurhasanah , Muhammad (2013) Implementation Of Integrated Marketing Communication And The Effect Toward Brand Equity. Project Report. UTeM, Melaka. (Submitted)

Nurkhairunnisa, Rafizi (2013) Dimensions Of Service Quality In Enhancing Supply Chain Management For Courier Service Industry In Malaysia. Project Report. UTeM, Melaka. (Submitted)

Nurlayana, Muty (2013) The Gene Exploration Of Chronic Diseases. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurnasriq, Rosidi (2013) 3D Animation Video As A Tool To Increase 12 Principles Of Animation Knowledge. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nursaiyidah, Salim (2013) Design Of Reconfigurable Defected Ground Structure For UWB Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nursakinah , Mahmud (2013) Analysis Of Wave Amplitude Modulation Effect For Variable Crack Orientations In Vibro Acoustic Inspection Method : Simulation Approach. Project Report. UTeM, Melaka. (Submitted)

Nursyahmi, Abdul Sukor (2013) Real-Time Monitoring System For Nursing Home. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Adlina, Mohammad Jamil (2013) The Determination Of Inconsistency Quality Cutting Of Composites Part At Abrasive Waterjet Trim Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Afiza, Othman (2013) Development Of Anti-Theft Vehicle And Gps Locator Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ain, Mat Arham@Elham (2013) Real Time Flood Hazard Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ain, Suhaimi (2013) Development Of AC-DC Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ain , Megat Zabidi (2013) Product Identification For Storage System Using MATLAB. Project Report. UTeM, Melaka. (Submitted)

Nurul Aini, Ahmad (2013) Overall Equipment Effectiveness Optimization (OEE) In Semiconductor Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Akmar, Emran and Noraswaliza, Abdullah and Nuzaimah, Mustafa (2013) Characterisation Of Data Set Features For Storage Space Optimisation Using Functional Dependency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Amiza, Amir Hamzah (2013) Development Of Source Separation Algorithm In Audio Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Azita , Yunos (2013) The Effectiveness Of Recruitment Method In Hotel Organisation. Project Report. UTeM, Melaka. (Submitted)

Nurul Azlina, Redzuan (2013) A Smart Support Tool For PSM Title Similarity Check Using Information Visualization Technique (smartTIC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Farah Atiqah , Rozahi (2013) Development Of Wireless Network Using Zigbee. Project Report. UTeM, Melaka. (Submitted)

Nurul Hafizah , Md Nasruddin (2013) Success Factors Of Women Entrepreneurs In Business. Project Report. UTeM, Melaka. (Submitted)

Nurul Hashimah , Jaffar (2013) The Determinants An Organization Culture That Inflence Of Creativity And Innovation Product For Small Medium Enterprise (SMEs). Project Report. UTeM, Melaka. (Submitted)

Nurul Hasliza, Mat Yusoff (2013) Preparation And Characterization Of Chitosan Powder From Shrimp Shells. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hazwani, Che Hashim (2013) Fingerprint Attendance System Using Zigbee Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hidayah, Mohd Nor (2013) Design And Development Of A Three Phase Shunt Active Filter Based On P-Q Theory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Husna, Abdul Khalil (2013) Wireless Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Iziana , Mohamed Nor (2013) Effectiveness Of Using Social Media For Creating E-Business, A Case Of Facebook. Project Report. UTeM, Melaka. (Submitted)

Nurul Izzati, Mohamad (2013) Energy-Efficient Led Lighting System For Residential Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Muzanil, Mustaffa (2013) Evaluation Of Psychophysical Experience And Heart Rate Of Malaysian Male While Manual Lifting Activities. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Shazwani , Mohtar (2013) Ease Of Use, Usefulness, Information Quality, And Feeling As Determination Of Facebook Usage Intention Among Student Of Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka. (Submitted)

Nurul Syaffinaz, Muttakal (2013) The Acoustic Treatment & Speech Intelligibility Quality Analysis Of Masjid UTeM Using Advance Tool Simulation And Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhuda, Mostafa (2013) The Effect Of Spent Bleach Earth (SBE) WT %On The Physical And Mechanical Properties Of Sintered Glass Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

On , Yuen Foong (2013) E-Labtest System For BITP 2303 Database Programming. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong , Teik Kean (2013) Compact Multiband Antenna Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong , Phaik Ling (2013) Classification of SNPs for obesity analysis using FARNeM modelling. Project Report. UTeM. (Submitted)

Ooi, Bun Jian (2013) Managing The Transition Of Fossil Fuels To Renewables Energy : Application Of Ocean Thermal Energy Conversion At Sabah. Project Report. UTeM, Melaka. (Submitted)

Ooi, , Su Guan (2013) Effect of gold treatment on the mechanical properties of 316L stainless steel. Project Report. UTeM, Melaka. (Submitted)

Or, , Khai Hee (2013) A low noise duct ventilation using C- transition curve design. Project Report. UTeM, Melaka. (Submitted)

Ow, Li Lee (2013) Sweet Heart Baby Location Tracker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

P

Patricia, Pati (2013) Development Of Monitoring System Of Automatic Plant Irrigator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Audit Dalaman Perpustakaan UTeM 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Audit Daripada Sirim Malaysia Ke Perpustakaan UTeM 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Jamuan Hari Raya Aidilfitri Perpustakaan UTeM. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Kelas Pendidikan Pengguna KPP. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Kursus Blue Ocean Strategy 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Kursus Kaedah Penyelidikan Siri 1/2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Kursus Pemantapan Personaliti Staf Perpustakaan UTeM 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Lawatan Daripada Institut Perguruan Melaka ke Perpustakaan UTeM 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Lawatan Daripada Kolej Matrikulasi Melaka 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Lawatan Daripada Perpustakaan Universiti Malaya 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Lawatan Daripada Sekolah Kebangsaan Paya Dalam Ke Perpustakaan UTeM. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Lawatan Daripada Universiti Malaysia Terengganu Ke Perpustakaan UTeM. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Lawatan Naib Canselor UTeM Ke Perpustakaan UTeM. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Lawatan Staf Perpustakaan Universiti Sains Malaysia Cawangan Kelantan Ke Perpustakaan UTeM. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Mesyuarat PERPUN 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Mesyuarat Repositori Institusi. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Mesyuarat Standard IPTA 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Pameran Buku 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Pameran Dan Promosi Perpustakaan Sempena Minggu Haluan Siswa 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Pameran Tahun Baru Cina 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Pemeriksaan Kesihatan 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Sambutan Hari Raya Aidilfitri Peringkat Perpustakaan UTeM 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Sambutan Hari Raya Aidilfitri Peringkat UTeM 2013. [Image] (Submitted)

Perpustakaan Laman Hikmah, Unit Rujukan (2013) Senamrobik Anjuran Perpustakaan UTeM 2013. [Image] (Submitted)

Perumal, Puvanasvaran (2013) Engineer in Society - Module 10. Other. Penerbit UTeM, UTeM.

Perumal, Puvanasvaran (2013) Industrial Engineering. Other. Penerbit UTeM, UTeM.

Peshwinder Singh, Harjit Singh (2013) Acoustic Performance Of Sandwich Skin For Acoustic Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Phang, Yuen Jun (2013) Action Mobile Game : Black & White. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Phoo, Kho Shin (2013) Design A Compact Tri-Polarized Antenna For MIMO System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Phung, Lee Mun (2013) Combine Infrared Lock-In Thermography And Curve Tracer Into An Integrated System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Puteri Noor Mastura, Megat Mohd Noor (2013) An Analysis Of Dielectric Constants Of Pharmaceutical Medicines Using Microwave Radiation Exposure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Q

Qurratu Ain, Iman (2013) The Perception Process Of CIMB Islamic DALI Equity Growth Fund : From Sensation To Investment Risk Acceptance. Project Report. UTeM, Melaka. (Submitted)

R

Radi Husin, Ramlee (2013) FPGA-Based Gps Tracking And Processing System Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Radin Puteri Hazimah, Radin Monawir (2013) Development of vision inspection system for automotive assembled part. Project Report. UTeM, Melaka. (Submitted)

Rafika, Buang (2013) A Critical Evaluation Of The Probable Causes Of Musculoskeletal Disorders Among Workers In Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahfizan , Khairuzzaman (2013) An investigation on the influence of double heat treatment process on mild steel plate. Project Report. UTeM. (Submitted)

Rahiman Salmi , Rosdi (2013) Study Of Energy Regenerative Suspension System For Vehicle. Project Report. UTeM, Melaka. (Submitted)

Revinnath, Tengga Daram (2013) Islanding detection using passive reactive power imbalance method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rina Fakhira , Zamri (2013) Design and development of RFID elevator. Project Report. UTeM. (Submitted)

Rizaini, Ramli (2013) Entertainment Subsystem For Pin-It Social Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roha Mini, Abdul Hazis (2013) Development Of Solar Watering Pump Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohaya, Dali (2013) Design And Analysis Of Casted LM6 - Tic In Designing Of Production Tooling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosfadzlin Hanna, Zainal Alam (2013) Design And Analysis Of Wood Laser Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslina, Mohd Nor (2013) Improvement Of Quality Process Control Of Airbus A320 Spoiler Programmed In Composite Technology Research Malaysia Sdn Bhd (CTRM): Process Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozaina, Kasim (2013) Development Heart Rate Monitoring System Using Zigbee. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rudy , Majid (2013) The Effect Of Applied Stress On Heat Treated Aluminum Alloys 7075 In DC Corrosion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

Safwan Shamil, Azhar (2013) Wireless Power Usage Monitor Based On Android Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saidah, Mohamad Aminallah (2013) Characterization Of Hydroxyapatite Coating Deposited On Glass, Stainless Steel And Titanium Alloy Substrate Via Sol-Gel Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sam, Chee Xin (2013) Implementation Of Photorealistic Augmented Reality Technique On Android Platform In Color Learning Process For Toddlers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sasitharan , Yellapan (2013) Development Of Brake System For Reduced Scale Vehicle. Project Report. UTeM, Melaka. (Submitted)

Sean , John Mathew (2013) Modeling And Optimization The Effects Of Process Variables On Mechanical Properties Of AL-6061 T6 Robotic CO2 Weldments. Project Report. UTeM, Melaka. (Submitted)

Shafiyah , Abd. Rashid (2013) Design And Development Of Corn Planting Tool : A Semi Automatictugal. Project Report. UTeM, Melaka. (Submitted)

Shahirah, Saadon (2013) Wideband Optical Amplifier Using High Concentration Erbium Doped Fiber In Single-Pass Configuration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahirah , Md Emran (2013) Smart detector database using RFID. Project Report. UTeM. (Submitted)

Shaidatul Nurmayanti, Ya'acob (2013) Analyzing The Anserverbot Android Malware Behavior Through Static. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaiful Adli, Yaakob (2013) Automatic Speaker Recognition System For Forensic Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsul Fakhar, Abd Gani (2013) Development Of Stereo Vision Sensor And Distance Estimation For Computer Vision Application (DE-CV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharifah, Rashidah (2013) Compact Microstrip Array Antenna Using Electromagnetic Band Gap (EBG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharifah Zafirah, Syed Zainal Abidin (2013) Transparent Conductive Carbon Nanotubes / Binder Hybrid Thin Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharon, Boon Khai Yen (2013) FMNA System (Forget Me Not Alert System). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shazailaana , Samsuddin (2013) Logistics And Supply Chain Management In The Hotel Industry : Impact On Hotel Performance At Naza Talyya Hotel, Melaka. Project Report. UTeM, Melaka. (Submitted)

Shazizi, Mustafa (2013) User Interface Assessment Of Car Dashboards. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shazreen , Mohd Asrap Khan (2013) Know your course android application. Project Report. UTeM. (Submitted)

Shazreena , Samat (2013) Effect of heat treatment on the microstructure and mechanical properties of low carbon steel. Project Report. UTeM, Melaka. (Submitted)

Sia, Jia Ling (2013) Industrial Temperature Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sim, Sau Seong (2013) Smart Switching Charging System For Solar Energy Storage Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sin, Chu Woon (2013) Design And Development Of Thermal Food Container. Project Report. UTeM, Melaka. (Submitted)

Sirinjeev Rao, Raman (2013) Design Of Casting Mold For Natural Fiber – Metal Matrix Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aishah, Rosli (2013) Design A Bow-Tie Patch Antenna With Complementary Split Ring Resonator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aisyah, Safuan (2013) Thermal Absorption Properties Of Spent Tea Leaf Filled Polyurethane Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Khadijah, Bharum (2013) Design And Analysis Of Resin Transfer Mould For Composite Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nadhirahwati , Azis (2013) The Effectiveness Of Hybrid Electrical System Usage Level Among Resident On Kapas Island. Project Report. UTeM, Melaka. (Submitted)

Siti Nadiah, Salim (2013) GSM Based Display Toolkit : Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Naziatul Umirah , Hasnol (2013) A Study On Stress Level And Its Implication On Productivity Among Women Engineers In Organizations. Project Report. UTeM, Melaka. (Submitted)

Siti Nooraishah , Elies (2013) Preliminary Investigation Of Plastics Joining Process. Project Report. UTeM, Melaka. (Submitted)

Siti Norashikin, Zolkaflee (2013) Optimization Of Cutter Path For Machining Complex 3D Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Norasidah , Md Yunos (2013) The Effectiveness In E-learning Portal (Ulearn) At Universiti Teknikal Malaysia Melaka (UTeM). Project Report. UTeM, Melaka. (Submitted)

Siti Noridayu, Samad (2013) A Study Of Value Stream Mapping (VSM) In HPF Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nur Adibah, Ithnin (2013) A Study Of Safety And Health Awareness And Noise Assessment At Stamping Die Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nur Atikah, Sheikh Abdul Hadi (2013) Investigating Android Malware (Droidkungfu 4) Behavior Through Static Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nurfarah Azreen , Mohd Azman (2013) Green Marketing At Melaka : The Consumer Buying Behaviour Towards Green Product. Project Report. UTeM, Melaka. (Submitted)

Siti Nurfatihah, Ab Rasid (2013) Manual Lifting Risk Analysis At Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nursyuhada, Mat Nasir (2013) Modeling Wire Antenna Using 3D Finite Difference-Time Domain (FDTD) Method In Graphical User Interface (GUI) For Radiation Pattern Evaluation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Rasyidah, Basiron (2013) The Financing Of Small And Medium Sized Enterprise (SMES) And The Impact To Business Performance In Melaka Food Industry. Project Report. UTeM, Melaka. (Submitted)

Siti Rukaini, Abdullah (2013) Android Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Saharah, Zahari (2013) High Efficiency Power Amplifier Design For Long Term Evolution (LTE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Sakinah Munirah, Ishak (2013) A Study Of Sunflower Oil Performance As A Gear Lubricant. Project Report. UTeM, Melaka. (Submitted)

Siti Sarah , Zahari (2013) The heat transfer phenomenon within volumetric receiver of concentrated solar tower using Diamond Like Carbon (DLC) material. Project Report. UTeM, Melaka. (Submitted)

Siti Syahirah, Samsuri (2013) The Effectiveness And Ability Of Quality Tools In Minimizing The Number Of Product Defects In Manufacturing Industries. Project Report. UTeM, Melaka. (Submitted)

Siti Umairah, Abdul Halim (2013) SDS Schizophrenia Detection System Using ID3 Algorithm Implemented For Mobile Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Wannorhassliza, Wan Hassan (2013) Characteristics Of Hydroxyapatite Sol-Gel Coating Of Stainless Steel In Hank’s Solution And Sodium Chloride Medium. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Zulaiha Atikah , Mohamad (2013) The implementation of hazard analysis critical control point (HACCP) in small and medium Malaysian food industries context for better business performance. Project Report. UTeM. (Submitted)

Sivanyanam , Subramaniam (2013) Modeling, Prediction And Optimization Of Dilution On Austenitic Stainless Steel (AISI 316L) Surfacing Of Low Carbon Steel (AISI 1020) Using Robotic Arc Welding. Project Report. UTeM, Melaka. (Submitted)

Sofia Murni, Paiman (2013) Arduino Coffee Pot Via Twitter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sopna, Balakrishnan (2013) Performance Analysis Of Multihop Transsmission Using ARP Routing Protocol In IEEE 802.11b Ad-Hoc Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Stephanie Mujan , Hamilton (2013) Thermal insulation particle board made from sugarcane bagasse and kenaf fibers reinforced with polythlene. Project Report. UTeM, Melaka. (Submitted)

Sumaiyah, Abdul Latiff (2013) Applying A Crisp And Fuzzy Analytic Hierarchy Process Method For Spatial Multi-Criteria Decision Analysis [Case Study : Spectacles Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sundram, Ramahlingam (2013) Design And Develop An Integrated Utility System (Water Meter). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suthakaran, Solamuthu (2013) Design And Development Of Small-Scale Regenerating Energy Using Brush DC Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syafiq, Ramli (2013) Manufacturing Process Selection For Circular Blade Using Analytical Hierarchy Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syafiqah Athirah, Abdul Razak (2013) Redesign Of Drum Packing Workstation At Medium-Scaled Electrical Cables Manufacturer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syahidatul Syahira , Abdul Rahman (2013) Numerical modeling of 1-dimensional wave equation using finite modal synthesis. Project Report. UTeM, Melaka. (Submitted)

Syahmi Ikhwan, Che Mohd Nor (2013) Mobile Global Positioning System (GPS) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syamsul Izwani, A Bakar (2013) Co-Curriculum Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syarfadila Ezurida, Shaari (2013) The Development Of Scaffold Design Selection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazwan , Zainuddin (2013) Fluid flow characteristic in curved tube heat exchanger by numerical method. Project Report. UTem, Melaka. (Submitted)

Syazwana, Mohamad Sukri (2013) Observations Of D-Region Ionosphere Using Tweek Atmospheric At Low Latitude. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazwani, Yaacob (2013) Mach 3 CNC Machine Software Familiarisation And Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Muhammad Hazwan, Sayed Ali (2013) Mechanical Behavior & Water Absorption Of Metal Matrix Composite (Tin+Rice Husk) Fabricated Via Permanent Mould Casting (Experiment With 5% WT And 15% WT Rice Husk). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Nasharudin, Syed Othman (2013) Rakan Keselamatan UTeM (RKU). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Zulkarnain, Syed Saidin (2013) Formulation of nanofluid from carbon nanoparticle based for natural convective heat transfer application. Project Report. UTeM, Melaka. (Submitted)

Sylvester, Chong (2013) Noise Level Assessment And Control Measures In Metal Stamping And Fabrication Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Tan, Beng Hong (2013) Design, Optimization And Prototyping Of Multipurpose Weld Electrode Holder. Project Report. UTeM, Melaka. (Submitted)

Tan, Chen Wei (2013) Mobile Phone Usage Alert System For Petrol Station. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Chun Chieh (2013) Shopping Mall Promotion Tracker Subsystem For Pin-It Social Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Hooi Gia (2013) How Video Can Persuade Malaysian Young Adult To Make Product Purchase : A Study On Character, Slogans And Sound Elements. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Jye Gin (2013) Design Of Micro-Power Generator Based On Electromagnetic Mechanism Harvesting Energy From Direct Air Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Shan Shan (2013) Hard Disk Drive Serial Number Recording And Inventory System Using Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Chee Fai (2013) Design Optimization And Up - Scalling Of Fire Fighting Machine: Water Spraying And Track Mechanism System Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tang, Han Yang (2013) Online Based Signature Verification Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufiq, Alias (2013) Simulation System On Productivity Using Smartmost Work Study Technique At Aerospace Manufacturing Company (E-MOST). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Ee Leng (2013) Automated Road Construction Safety Traffic Light System For 2 Lanes Road Closure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teng, Kuan Hui (2013) Experimental study of the behaviour of baphasic materials. Project Report. UTeM, Melaka. (Submitted)

Teng, Jin Chung (2013) Portable Physiotheraphy Limbs Rehabilitation Robot - User Interface And Data Manipulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Chee Huat (2013) Pedestrians Emerging And Safety Alert System In Public Buses For Road Users. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Chun Earn (2013) Design and fabrication of polyvinyl chloride tie-rod cylinder for low pressure water hydraulic system. Project Report. UTeM, Melaka. (Submitted)

Thailis Bounya , Ngelayang (2013) The impact of Gate-Induced Drain Leakage (GIDL) on scaled MOSFET for low power application. Project Report. UTeM. (Submitted)

Tham, Kar Mun (2013) Exploring The Failure Mode And Mechanical Properties Of Spot Welded Dissimilar Joints For Austentic Stainless And Galvanized Steels. Project Report. UTeM, Melaka. (Submitted)

Thanabalan, Kuppusamy (2013) Development Of Demand Response Control Interface To Maximise Energy Utilisation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Thien, Kai Lip (2013) Total Design Of Multipurpose Tray For KTM Train Seat. Project Report. UTeM, Melaka. (Submitted)

Thong, Ming Chuin (2013) Redesign Of Bombardier PUTRA LRT Seat. Project Report. UTeM, Melaka. (Submitted)

Tiang, Leh Mei (2013) Visual Representation Of Augmented Reality Mobile Dictionary Application On Android Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tong, Ho Yow (2013) Real Time Traffic Light Fault Detection And Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tuan Norhasmira , Tuan Haris (2013) Numerical modelling of simple harmonic oscillator. Project Report. UTeM, Melaka. (Submitted)

U

Umar, Mohd Fuad (2013) Effect of assembly line and normal working environment to cycle time. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ummi Kalsom, Mohamad Hashim (2013) Land Surface Temperature Determination For Selangor Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ummi Nazirah, Jamil Khair (2013) Real-Time Wireless Face Recognition System (RT-WiFARES). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Universiti Teknikal Malaysia Melaka (2013) Anugerah Akademik Universiti 2012. Universiti Teknikal Malaysia Melaka.

Universiti Teknikal Malaysia Melaka (2013) Anugerah Akademik Universiti 2013. Universiti Teknikal Malaysia Melaka.

Universiti Teknikal Malaysia Melaka (2013) Majlis Konvokesyen Ke-9 Universiti Teknikal Malaysia Melaka. Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka (2013) Syarat-syarat Kemasukan Universiti Teknikal Malaysia Melaka Sesi 2013/2014. Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Canselori (2013) Majlis Anugerah Perkhidmatan Cemerlang '13 Universiti Teknikal Malaysia Melaka. Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Fakulti Teknologi Maklumat dan Komunikasi (2013) Academic Handbook Session 2013/2014: Faculty of Information and Communication Technology. Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Fakulti Teknologi Maklumat dan Komunikasi (2013) Buku Panduan Akademik Sesi 2013/2014: Fakulti Teknologi Maklumat dan Komunikasi. Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Pejabat Pendaftar (2013) Album Majlis Konvokesyen Ke-9 Universiti Teknikal Malaysia Melaka. Penerbit Universiti, Durian Tunggal.

Universiti Teknikal Malaysia Melaka, Pejabat Pendaftar (2013) TERAS. [Bulletin]

Universiti Teknikal Malaysia Melaka, Pejabat Perancangan Dan Komunikasi Korporat (2013) Berita@UTeM. [Bulletin]

Universiti Teknikal Malaysia Melaka, Pusat Islam (2013) Buletin Fikrah. [Bulletin]

Universiti Teknikal Malaysia Melaka, Pusat Komputer (2013) klik@PKOMP. [Bulletin]

Universiti Teknikal Malaysia Melaka, Pusat Pengajaran dan Pembelajaran (2013) Catalyst. [Bulletin]

Universiti Teknikal Malaysia Melaka, Pusat Pengajian Siswazah (2013) Guidelines for the Preparation of Thesis, Dissertation & Report for Graduate Programmes. Universiti Teknikal Malaysia Melaka.

Universiti Teknikal Malaysia Melaka, Pusat Pengajian Siswazah (2013) Postgraduate Academic Regulations. UNSPECIFIED.

V

Vasanthan, Sakthi Velu (2013) Motion Control Of Pneumatic Muscle Actuator : Experimental Setup And Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vikneshwaran, Naidu (2013) Wireless Data Logger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vikneswaran, Kanathasan (2013) Video Streaming Quality In Wireless Mesh Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vivek, Regeev (2013) The Design Of A Torque Feedback Controller For An Upper Limb Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wahyono Sapto, Widodo (2013) Study And Design Of Multi-Blade Wind Energy Conversion System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Ab Haneef, Wan Ab Hapiz (2013) Analysis Of Embedded Router Universal Plug And Play (UPnP) Media Server Performance Over Wireless. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Izzuddin, Che Wan Nor Azizi (2013) Optimal Location For Solar Energy Storage System (SES) On Grid Connection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Hanis , Wan Harun (2013) Investigation of thermal conductivity and viscosity of nanofluid. Project Report. UTeM, Melaka. (Submitted)

Wan Muhammad Akramuddin, Abdul Rahman (2013) An Alert System For Web Server. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Noor Aini, Wan Makhzan (2013) Analysis Of Low Pass Filter Using Bowtie Defected Ground Structure (DGS) At 10 GHZ For Radar Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Norazrini , Idris (2013) Model Matematik "Hibrid-Mekanikal Berasaskan Rim" Menggunakan Roda Tenaga Dwi-Jisim Untuk Mengoptimumkan Penggunaan Tenaga Dalam Motosikal Hibrid-Mekanikal. Project Report. UTeM, Melaka. (Submitted)

Wan Nurul Sharmila, Wan Hanafi (2013) Auto Triggered Current Cut-Off System For Energy Saving. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Salwani, Wan Harun (2013) Nighttime D-Region Ionospheric Characteristic From Tweek Atmospheric Observed In The Mid Latitude Region. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Kian Loon (2013) Innovative lighting system design with magnetic levitation principle. Project Report. UTeM, Melaka. (Submitted)

Wong, Tze Mei (2013) Smart Health Alert System Via Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Wei Ming (2013) Routing System With Informative Display For Public (R-SID). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong , Chee Yin (2013) Performance analysis of smartphone based real-time driver system over IEEE 802.11 wireless networks. Project Report. UTeM. (Submitted)

Wong, , Hee Kiong (2013) Measurement of structure-borne noise from road input in a motor vehicle cabin. Project Report. UTeM, Melaka. (Submitted)

Y

Yap, , Wan Loong (2013) Design Development Of Load Carrier Type AGV. Project Report. UTeM, Melaka. (Submitted)

Yap, Paul Yin (2013) Windows Phone 8 Diet Monitoring Application Among Overweight And Obese Adolescents Through Augmented Reality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, Xue Nee (2013) The Effect Of Air Pollution Control Service On Customer Satisfaction (A Case Study At Company XYZ). Project Report. UTeM, Melaka. (Submitted)

Yin Fen, Low (2013) Objective Measure Development For Attention-Related Electroencephalographic Activities Unduced By Transcrabial Magnetic Stimulation (TMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Sze Yeau (2013) Design Analysis Of High Performance Motorcycle Disc Brake. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong Chea, Chee (2013) Payment Behaviour Of Small And Medium Size Oil Palm Plantation Borrowers. Project Report. UTeM, Melaka. (Submitted)

Yong Wee, Sek and Syariffanor, Hisham and Ahmad Naim, Chee Pee and Chin Foon, Khoo (2013) Measuring User Beliefs And Attitude On Using Pedagogical Tool In Learning Engineering Mathematics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yuearajan, Santhiran (2013) Modeling And Simulation Of Drawing Process On Aluminium AA7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yun Huoy, Choo and Azah Kamilah, Muda (2013) A New Associative Classification Using Genetic Algorithm Pruned Decision Tree. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yunus, Ahmad Rozelan (2013) PERSONALITI DAN KEAKURAN: FAKTOR MEMPENGARUHI PENCAPAIAN AKADEMIK. Project Report. Penerbit UTeM.

Yusmady, Mohamed Arifin and Safarudin Ghazali, Herawan and Mohamad Firdaus, Sukri (2013) A Study On Improving Air Circulation In A Confined Space. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusra Liyana , Jaafar (2013) Feasibility study of the design artificial disc replacement prostheses. Project Report. UTeM, Melaka. (Submitted)

Z

Zahriladha, Zakaria (2013) Development of Coaxial Transverse Electromagnetic (TEM) Resonator Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamberi, Jamaludin and Shariman, Abdullah and Nur Aidawaty, Rafan (2013) Robust Motion Controller Design And Accurate Positioning System For A Sliding Table. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zawani, Abdul Hadi (2013) Study Of Harmonic Current Reduction In A Office Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zetty Zuraida, Saharudin (2013) Design Wideband Microstrip Antenna Using Graphene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulikha , Mohamad Akhir (2013) Design Improvement And Analysis Of 4DoF Parallel Robot. Project Report. UTeM, Melaka. (Submitted)

Zulkiffli Fahmi , Ambia (2013) A Study Of AGV Drive Mechanism. Project Report. UTeM, Melaka. (Submitted)

Zurianee, Lokman Loganathan (2013) Preparation And Characterization Of Sol-Gel Derived Hydroxyapatite Coating On Stainless Steel Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

This list was generated on Wed Jul 3 08:43:27 2024 MYT.