Items where Division is "Library > Final Year Project > FKM" and Year is 2009

Mohd Nizar , Manshor (2009) Design Analysis Of A Press Machine For Disposable Pet Bottle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

Ab. Hakim, Ab. Halim (2009) Kajian Tentang “Menambahbaikan Sistem Brek Letak Kereta Elektrik Untuk Kereta Penumpang”. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rasid, Jaafar (2009) Study And Analysis The Effectiveness CAD-CAM System In Mold Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Salam, Adam (2009) Mereka Bentuk Platfom Keselamatan Untuk Kerja-Kerja Membuka Dan Menutup Kanvas Lori. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Ab Aziz (2009) Vehicle Handling Improving By Active Steering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakim, Rohhaizan (2009) Investigation Of Pressure And Temperature Cause By From Turbo System In Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Ahmad Tarmizi (2009) Kajian Terhadap Kekuatan Rekabentuk Tangki Gas Petroleum Cecair (LPG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Ismail (2009) Study On Predictive Maintenance Of HVAC System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Kamarudin (2009) Vibration Analysis Of Turbine Generator Based On Onboard Data. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Airfan, Khalid (2009) Perbandingan Kesan Pengurangan Bunyi Oleh Penyenyap Bunyi Jenis Gabungan Dan Penyenyap Bunyi Jenis Tunggal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aizat, Ahmad Ramly (2009) Ergonomics Evaluation And Design Of The Hand Tools Used In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Deli, Mohd Noor (2009) Menganalisa Keadaan Bukan Linear Analisis Unsur Terhingga Terhadap Rasuk Daripada Struktur Badan Bas Apabila Dikenakan Daya Lentur. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz, Kamarul Zaman (2009) Design Improvement Of Existing Executives Chair In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz Fikri, Ghazali (2009) Study Of Energy Absorption Of Motorcycle Safety Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizol, Ismail (2009) Comparison Of Two And Three Plate Molds Plastic Injection Molding For Mold Design Selection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ghazali , Zulcefli Muhammad (2009) The Investigation Of Effect Of The Capillaryty On The Penetrant Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hazwan, Fauzi (2009) Parking Brake Tester. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nur Qamari, Mohd Azhari (2009) Improvement Of Mechanical Properties Of Aluminum Alloy By Artificial Aging Treatment For Structural Application In Automobile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Razif, Rabudin (2009) Research Study On The Noise Level At The NGV Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rezduan, Zainal (2009) Development Of New Third Light Brake Signal On Motorcycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridhwan, Abdul Rahman (2009) Apparatus Embodiment Of Solar Power Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sobri, Ishak (2009) Development Of Aerodynamic Smoke Tunnel Unit For Teaching And Learning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syafiq, Baharin (2009) Experimental Modal Analysis On Flexible Plate Structure Using Forced Vibration Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaifazlin , Zainordin (2009) Magnetorheological Brake System Characterization Using Non Parametric Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishatul Rodhiah, Mohamad (2009) The Study Of Rings Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizat Fuad, Ahmad Shatar (2009) Studies And Design Of Suspension System For A Formula SAE Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alia Ruzanna, Aziz (2009) Mereka Bentuk Dapur Suria Yang Praktikal Digunakan Untuk Memasak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ameenah, Am Abdul Aziz (2009) Kajian Dan Penghasilan Penapis Seramik Bagi Proses Tuangan Aloi Aluminium. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Zaid, Baharudin (2009) Penyerapan Tenaga Oleh Keluli Lembut Di Bawah Hentaman Kuasi-Statik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Fariq, Ramly (2009) Design Of Automatic Gate Powered By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amrik Singh, Phuman Singh (2009) Modeling And Simulation Of 14 DOF Vehicle Dynamics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aribbin, Mohd Nazifi (2009) Study On Noise Level From The Effect Of CNG Tank Installation In Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asfaezuddin , Zakaria (2009) Analisa Perpindahan Data Model Surface Di Antara Platfom CAD Yang Berbeza. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azaimmy , Maksid (2009) Kajian Kegagalan Statik Dan Lengkokan Ke Atas Menara Penghantaran Elektrik Dan Kaedah Analisis Unsur Terhingga Menggunakan Perisian Berkomputer MSC/NASTRAN-PATRAN. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizuddin, Abdul Aziz (2009) Kekuatan Gentian Kaca Berlamina. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman , Ismail (2009) Simulation And Experimental Investigation On A Pneumatically Actuated Active Suspension System Using Gain Scheduling PI Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Chan , Mei Yee (2009) The Study Of The Aggressive Turning Process On Aluminium For Automotive Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia , Hwee Siang (2009) Investigation Of Turbine Blade Failure And Stress Distribution By MSC Nastran Patran In Cargo Ship Turbocharger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choi, Yoke Pool (2009) Development Of Low Pressure Water Hydraulic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choong, Kei Shing (2009) Design And Development Of Drive Simulator For Vehicle Dynamic Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choy, Ying Yi (2009) Leaching Process Of Nata De Coco - Automation System Design And Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

Dalila, Nizam (2009) Membangunkan Sistem Larut Lesap Untuk Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

Elfirah, Ab. Rahman (2009) Reverse Engineering Application In The Development Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Em, Poh Ping (2009) Development Of A Simple CVT System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Engku Zaidi, Engku Ibrahim (2009) Kajian Analisis Risiko Kualitatif Dan Kuantitatif Pada Penggunaan Stesen Pengisian Gas Asli (NGV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fadhlizil Fariz, Md Saad (2009) The Design And Development Of Warning Device For Low Pressure LPG Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizal , Ahmad (2009) Vibration - Free Positioning Of Gantry Crane System Using Impulse Shaping Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahdatul Sahuda , Suhiri (2009) Effect Of Martempering Process On Plain Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahilda, Masekam (2009) Mapping Corrosion Activities Of Various Concentration Of Acidic Solution In A Pipe Using Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farizzamzam, Nasruddin (2009) Design And Analysis Of The Drivetrain System For Formula SAE Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong, See Yan (2009) Longitudinal Aerodynamic Performance Of An Aircraft Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong , Yee Siang (2009) Effect Of Fuel Moisture Content On Solid Waste Combustion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

Gan, Kok Heng (2009) Improvement On The Domestic Solar Water Heating Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Chep Kien (2009) Design And Development Of Tire Force Measuring Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hafiz, Hashim (2009) Pemodelan Enjin Dua Lejang Dalam Perisian Simulasi "GT-POWER". Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizah, Che Hussin (2009) Study On The Aftermarket Production Of Ignition System In Relation of Engine Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah , Syamsulrizal (2009) The Fracture Mechanic On The Spot Welded Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hendra, Ruding (2009) Membangunkan Enjin Motosikal Menggunakan Bahan Api LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Illy Salwana, Abd Razak (2009) The Study Of Cylindrical Tube Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Khairul Faiz (2009) Study On Design Of Self-Cleaning Filtering Machine For Waste Water Treatment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Iskandar, Meran (2009) Damage Initiation And Propagation Of Sandwich Composites Panel Under Compressive Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izhar Hifnie, Mohd. Amin (2009) Design And Analyze The Chassis Of An Electric Vehicle For Use In Campus Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izyan Fairuz, Md Rasid (2009) Analysis Of The Stress-Strain Behaviour Of Beam For Different Type Of Cross-Section And Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Justin, Lasa (2009) Kajian Terhadap Kesesuaian Rekabentuk Pengewap Yang Digunakan Dalam Kenderaan LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kam, Pei Yi (2009) Toughness Of Fibreglass Laminated Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal Ruzuan, Mat Hussin (2009) An Investigation Of Motorcycle Disc Brake Rotor Using Finite Element Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kauthar , Ahmad Tajudin (2009) A Study Of Flaw Entrapment Efficiency In Penetrant Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Low Chit (2009) The Design And Development Of Pneumatic Impulse Rocket For Night Parachute Search Lighting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil, Azman (2009) A Feasibility Study On Phototherapy Unit Powered By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anuar, Ahmad (2009) An Investigation Of Turbine Blade Failure In Aircraft Turbine Engines. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Azri, Azlan (2009) Development Of An Active Bumper System To Reduce Vehicle Crash Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Izad, Jalil (2009) Analisis Hentaman Terhadap Komposit Diperkuat Gentian Kaca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Najjib , Shokhaimi (2009) Study On Operating Engine Temperature In Relation With Engine Performance. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Khalid, Khairul Syafiq (2009) Design And Commercialization Study Of Rainwater Harvesting System For Residential House In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kjeldsen, Yusuf (2009) Comparison For Front Door Passenger Car With Local And Import Car Using Design For Manufacture And Assembly (DFMA) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lee , Tze Jian (2009) Development Of Data Acquisition System For Tyre Force Measuring Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Fong Kiaw (2009) Air Flow Around Bodies In Subsonic Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Swee Meng (2009) Rolling And Yawing Aerodynamic Performance Of An Aircraft Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling , Chai Voon (2009) Design And Analysis On Durian Opener. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Marani, Rahmat (2009) Analisis Dalam Menghasilkan Plastik Diperkuat Gentian (FRP) Menggunakan Plastik Terbuang Dan Sabut Kelapa Sawit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masni, Ahmad Basri (2009) Mengkaji Sifat-Sifat Mekanikal Campuran Plastik Buangan Yang Terdiri Daripada Plastik Jenis PET, HDPE Dan PS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mastura, Azmi (2009) Heat Transfer In An Array Of Staggered Tube Using Computational Fluid Dynamic (CFD) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Azriq Izwan, Md Yusop (2009) Gantry Crane System : Inverse Dynamic Analysis Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Salim, Md Yunos (2009) The Usage Of Solar Energy To Reduce The Warm Temperature In The Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Amiruddin, Nor Azizan (2009) Study Of Application Of Light Weight Concrete. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ariff Shah, Mohamed Nazmi (2009) Conceptual Design And Development Of A Composite Drivetrain Differential Casing For Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Elfizi, Serat (2009) Kajian Ke Atas Bahan Buangan Sebagai Bahan Menjimatkan Tenaga Di Dalam Sektor Pembinaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Farhan, Zulkipli (2009) Study Of Energy Absorption Of Bicycle Safety Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fazrie, Mahadi (2009) Strength And Safety Evaluation Of Automotive's Component Which Steering Knuckle And Material That Have Been Used. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fikri , Mohamad Yunus (2009) Fabrikasi Dan Memasang Alat Pemampat Gas Petroleum Cecair (GPC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Harith, Abdul Ghani (2009) The Improvement Of Existing Truing Jig Stand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Asyraf, Omar (2009) Investigate Blade Failure In Axial Compressor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Firdhaus, Hajan (2009) Development Of Sieving Machine For Palm Oil Mill Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hadi , Abd Halim (2009) Maintenance Strategy Development (MSD) Using Reliability Centered Maintenance In A Power Plant : A Holistic Study. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Nasiruddin, Mahfoz (2009) Gantry Crane With On-Off Motor Command : Design And Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Ruzaini , Razali (2009) Development Of Thermoelectric Cooler. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohandas , Sagaran (2009) Development Of Control System For Sepak Takraw Launcher Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Afdhal, Shamsudin (2009) The Design And Development Of Engine Intake Manifold For Proton Wira. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aimi , Ubaidillah (2009) Rekabentuk Pengoptimuman Sistem Penghantaran Kuasa Mesin Pemadam Kebakaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ain , Kamaruddin (2009) Analisis Risiko Daripada Sudut Kualitatif Dan Kuantitatif Terhadap Teksi NGV. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizuddin, Abd Razak (2009) Design And Product Development Of Product (s) Through Concurrent Engineering Tools And Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amerrull, Ismail (2009) Aerodynamic Study On An Aircraft. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin, Muhd Kamaruddin Pater (2009) Merekabentuk Sistem Stereng Depan Bagi Kereta Lumba Formula Pelajar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirul , Awang (2009) Analysis And Simulation On Impact Collision Of Multi-Purpose Vehicle (MPV) As NGV. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amri , Mohamed Khairi (2009) Design And Analysis Of Safety Mobile Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashraff, Che Hashim (2009) Preliminary Study On Power Train System For Electric Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asyraf, Ruslan (2009) The Study Of Comparative Analysis Of Boothroyd Dewhurst (BD) Design For Manufacture And Assembly (DFMA) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azinuddin, Ismail (2009) Kajian Model Bentuk Piawai Menggunakan Prototaip Pantas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi , Omar (2009) Mereka Bentuk Basikal Roda Tiga Hibrid Yang Dijanakan Oleh Dwitenaga Iaitu Tenaga Manusia Dan Tenaga Elektrik Untuk Kegunaan Di Bandar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azrol Hairomy , Mohd Nordin (2009) Eksperimen Analisis Ragaman Terhadap Kereta Penumpang Kompak Yang Menggunakan Tangki NGV. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Azrul, Omar (2009) Feasibility Study And Conceptual Design On The Automatic Fish Freeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faez, Saharudin (2009) A Study On Impact Response Of Advanced Laminate Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Abdullah Sani (2009) Effect Of Heat Treatment Process Of Stainless Steel For Watch Manufacturing Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiezul, Johari (2009) A Comparison Study Of Standard Test Method For The Determination Of Flexural Property Of Glass Fiber Polyester Laminates. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz , Hamizan (2009) Kajian Terhadap Rekabentuk Injap Solenoid Bagi Sistem Gas Petroleum Cecair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farid, Othman (2009) Pembangunan Bahan Bangunan Penjimatan Tenaga. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fariz, Sabtu (2009) Application Of Design For Environment In Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Ab Rahman (2009) Kajian Pembahagian Aliran Tenaga Untuk Penggunaan Tenaga Cekap. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Zamri (2009) Design And Development Of Hybrid Composite Chassis For Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Ab Razak (2009) A Study Of Aerodynamics For F1 In Schools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafeez, Awang Hamat (2009) Modal Analysis On Flexible Plate Structure Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafidz, Zakaria (2009) The Development Of Composite Bodywork Of Nose Cone Panel For Formula Varsity Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizi, Abdul Rahman (2009) Design And Development Of Composite Suspension Push Rod For Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanif, Md Yusuf (2009) Development Of Four Wheel Steering System For RC Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hazuan , Mohd Zawawi (2009) Design And Analysis Of Electrical Iron Using Boothroyd Dewhurst DFMA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hidayat , Ishak (2009) Merekabentuk Dan Menjalankan Simulasi Untuk Model Dynamic Headlamp Cornering Dan Merekabentuk Skematik Litar Elektrik Untuk Proses Pengajaran Dan Pembelajaran ( P&P). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hisham, Baharuddin (2009) The Effect Of Lean NOx Trap Catalyst On NO2 Removal From Diesel Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Huzairi , Saribin (2009) Mereka Bentuk Dan Menghasilkan Prototaip Mesin Membelah Dan Mengeluarkan Isi Buah Koko. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ihsan , Hussin (2009) Development Of Rotor For Axial Flow Compressor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kasmie, Abdul Halim (2009) A Non-Destructive Crack Detection Technique Using Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Izham, Abdul Latiff (2009) A Study Of Using Solar Energy For Stadium In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khalil, Mohd Zaki (2009) The Saving Of Fuel Usage In Generator By Using The Hho Gas From Electrolysis Of Water (Hydro Fuel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mu'adz , Md Eswan (2009) Heat Transfer In A Terrace House With Using Rock Wool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najmi, Abdullah Sani (2009) Effect Of Heat Treatment Process Of Titanium For Watch Manufacturing Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Naqib, Derani (2009) Development Of Portable Head Massager Concept Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nawawi, Mustafa (2009) The Effect Of Hole Plate On Automotive Waste Heat Extraction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazizi, Sungip (2009) Retrogression And Reaging (RRA) Treatment Process And The Effect On Microstructure And Mechanical Properties Of Aluminium Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor Asril, Saadun (2009) Preparation Of Catalytic Converter For Two Stroke Generator Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor Asril , Saadun (2009) Preparation Of Catalytic Converter For Two Stroke Generator Engine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Raus , Zainudin (2009) Aerodynamics Cooling Of Disc Brake Rotor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rizal, Osman Teng (2009) Merekabentuk Dan Membangunkan Ampaian Baju Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sabri, Mohamed Mokhtar (2009) Aerodynamic Optimization Of F1 Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Samsudin, Mat (2009) Design An Exhaust System For Formula Student Racing Car. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Saufi, Amran (2009) Studies And Design Of Carbon Fiber Monocoque Chassis For Formula SAE Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shafwan, Mohd Zahid (2009) Kajian Terhadap Sistem Suspensi Depan Bagi Kereta Lumba Formula Pelajar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shasrul Syafiq , Mohamad Sharip (2009) Magnetic Levitation System: Modeling And Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shazni, Amerisah (2009) Development Of Low Power Air-Conditioning Using Water Chilled System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shazwan, Mohd Zaki (2009) Analysis Of Multiaxial Force Acting On Stering Knuckle Of A Vehicle On Uneven Surfaces. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shukor, Hadran (2009) Conceptual Development Of Gear Braking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq, Mat Samuji (2009) Development Of Ergonomics Passenger Car Driver Seat Concept Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq, Radzali (2009) Kajian Awal Tentang Sistem Rantaian Kuasa Untuk Kereta Elektrik Hibrid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Taha, Hanafi (2009) Analisis Risiko Daripada Sudut Kualitatif Dan Kuantitatif Terhadap NGV Pada Kereta Kompak. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Yusri , Ibrahim (2009) Analysis And Simulation On Impact Collision Of Compact Passenger Car As NGV. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Zhilal, Mohd Faudzi (2009) Simulation And Experimental Evaluation On Sliding Mode Control For Pneumatically Actuated Active Suspension System Using Quarter Car Test Rig. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zubir, Amir (2009) Force Tracking Control Of Magneto-Rheological (MR) Damper Using PI Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulfadli, Ahmad (2009) Mengkaji Kesan Pertambahan Cross Member Pada Nisbah Torsional Stiffness Terhadap Jisim Bagi Casis Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhimi, Ali (2009) A Feasibility Study On 'Highway Dummy Signal' Powered By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Syafiq, Md. Taib (2009) Merekabentuk Dan Menganalisa Mekanisma Pergerakan Tangan Mekanikal Menggunakan Lego Mindstorms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad, Manap (2009) An Aerodynamics Study Of Body Work Of Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Arif Fahmi, Abdul Wahab (2009) Design Of Test Rig For Bending And Torsion Of Vehicle Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Firdauz, Abd. Rasid (2009) The Effect Of Probe Type In Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khalis , Ramli (2009) Design And Analysis Of Mechanical Hand Using Computer Aided Mechanism Design (CAMD) Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad, Abdullah (2009) Kawalan Iklim Dalam Satu Ruang Tertutup. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Anas, Md Salleh (2009) Mereka Bentuk Dan Menguji Sistem Penapis Air Hujan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fadhlullah , Hasan (2009) The Design And Development Of Oven Using Dissipative Heat From Refrigerator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafidz, Ibrahim (2009) Pressurized Pyrolysis Of Wood Dust. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hatta, Anuar (2009) Design And Analysis Composite Car Bumper Using CAD And CAE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ikram, Mohd Zain (2009) Design Optimization For Automotive Wiper Retractor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Khidir , Abdul Rahman (2009) A Study On The Optimum Natural Gas Storage Tank Design Using The Gas Adsorbent Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Luqman Hakim, Abd Rahman (2009) Simulation And Experimental Investigation On Semi Active Suspension System With Skyhook, Groundhook, And Hybrid Controllers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ridzwan , Zulkifli (2009) Ramalan Hayat Lesu Bagi Kimpalan Plat Keluli Lembut. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shukri, Othman (2009) Reka Bentuk Pembangunan Alat Pengisian Bola Takraw Untuk Pelontar Bola Takraw. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syammil, Helmi (2009) Study On Typical Emission From Petrol Engine Fueled With Liquefied Petroleum Gas (LPG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syimir , Yusof (2009) Development Of Solar Collector For Hot Water System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syimir Haziq, Sansul Bahri (2009) Design Feasible Cloth Drier Utilizing Domestic Waste-Heat For Household Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Khodri , Abu Hassan (2009) Design Improvement Of Boom Module System For The Fire Fighting Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhd Muslim, Abu Bakar (2009) Development Of A Side-Pot Body Panel For A Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhsin , Abdul Razak (2009) Development Of Double Wishbone Suspension Using Glass Fiber Reinforced Polymer (GFRP) For Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muzaffar Cheong, Ronaldin (2009) Heat Treatment Studies On Lead Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Naim Husni , Latif (2009) Study On Typical Emission From Diesel Engine Fueled With Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazrul , Mohamed Asru (2009) Merekabentuk Sistem Pengudaraan Efektif Kereta Yang Sedang Diletakkan Di Tempat Letak Kereta Tanpa Bumbung. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Shu Tyng (2009) Development Of Computational Model Through Reverse Engineering : Car Side Mirror Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng , Siew Wan (2009) Development Of The Audit Energy Software For Office Building By Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Haidar, Nik Abdullah (2009) The Effect Of Woven Glass Lay-Up Orientation On Flexural Strength Of Laminated Polymer Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Norkamilah , Megat Muda (2009) Design And Analysis Of Mechanism Used In A Fire Fighting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Shamira, Abdullah (2009) Merekabentuk dan Membuat Sirip Di Dalam Cerek Untuk Mengkaji Kesannya Ke Atas Tempoh Pendidihan Air. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Syarida , Abdul Rahman (2009) Papan Partikel Daripada Sekam Padi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Zaiedurra Irdawatie, Nordin (2009) Feasibility Study And Redesign Few Modules Of The Existing Fire Fighting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorlydiana, Hussain (2009) Study Of Evaluation Of Drag Acting On The Truck Trailer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Fadhlina, Ab Razak (2009) Alternative Material For Motorcycle Brake Pedal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Zhafarina, Aboo Bakar Merican (2009) Design And Product Development Of Multi-Purpose Rihal Through Concurrent Engineering Tools And Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazlan, Ab. Razak (2009) Investigation Of Power Produced From Turbocharger In Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazli , Borhan (2009) Kesan Parameter Liang Ekzos Ke Atas Janaan Kuasa Bagi Enjin Dua Lejang. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nordiana, Mohd Hatta (2009) Air-Conditioning System By Using District System (DCS) - Thermal Energy Storage (TES) Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norfairuz , Mansor (2009) Kajian Kemungkinan Menghasilkan Bahan Bakar (Biofuel) Alternatif Daripada Ubi Kayu Dan Merekabentuk Dapur Gas Etanol. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhabib, Mohd Kamin (2009) Study On The Effect Performance Of Carbon Adsorbent With Different Term Of Size And Method In LPG Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norman Jeff, Muntok (2009) Engine Performance Test On Ngv Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Alwani, Hashim (2009) Penentuan Tempoh Selenggaraan Optimum Bagi Sistem Penghawa Dingin Di Bangunan Fakulti Kejuruteraan Mekanikal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asyikin, Othman (2009) Energy Absorption Of Triangular Rings Subject To Transverse Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fazlina , Ahmad (2009) Penyediaan Larutan Bahan Punar Bagi Aloi-Aloi Bukan Ferus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhidayah, Hamdan (2009) Development Of Magneto Electrolysis For Hydrogen Generator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Azwa, Abdul Rahman (2009) Damage Initiation And Propagation In Composite Materials Subjected To Tensile And Compression Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Farha, Abdul Rahman (2009) Application Of Design Of Experiment For Bell Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hafidzah, Rosli (2009) The Effect Of Probe Frequency In Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Huda, Zaifuddin (2009) The Simulation And Development Of Oven Using Dissipative Heat From Refrigerator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Huda , Zaifuddin (2009) The Simulation And Development Of Oven Using Dissipative Heat From Refrigerator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Syazwani , Bakri (2009) Development Of Prototype For Domestic Vacuum Cooker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Raihana, Ramle (2009) Corrosion Rate Of Aluminum Alloy By Anodizing With Emphasis On Body Panel Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Khairul Nazri , Raja Deris (2009) Designing A Solar Energy System For Road Signage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Noorzihan, Raja Ab Kadir (2009) Kajian Terhadap Sistem Suspensi Belakang Bagi Kereta Lumba Formula Pelajar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raziman , Ramli (2009) Study On The Laminar Pulsed Flow In Microchannel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Reza Assad, Zakaria (2009) Kajian Perubahan Bentuk Plastik Terhadap Daya Lenturan Melalui Kaedah Ujikaji. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ridhwan, Jumaidin (2009) A Study Of Liquefied Gas System Effects On Internal Combustion Engines. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roddy, Ranggau (2009) Design And Analysis Of Hydraulic System For Fire Fighting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosliza, Ismail (2009) Feasibility Study On Mechanical Properties Of Various Vacuum Casting Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosna , Hamzah (2009) Qualitative And Quantitative Risk Analysis In Mechanical Laboratories of UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruseli, Kien (2009) Thermal Stress Analysis On Heavy Truck Disc Brake Rotor Using Finite Element Analysis (ABAQUS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

Safirul Ikhmal , Saharudin (2009) Study On Thermal Performance Of Thermoelectric Cooling Module. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Saifuddin , Ngspar (2009) The Study Of The Wave Energy Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salman, Ahmad Tajudin (2009) Rekabentuk Dan Analisis Mesin Pemerah Kelapa Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sanmugethan , Kuppusamy (2009) Study On Mechanical Behaviour Of Resistance Spot-Welding Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saqinah , Bakri (2009) Study On Performance Of Vacuum Fry Drying System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shiridharan, Ganesan Muthi (2009) Design Of Thermal Climate Test Chamber For Smart Building Investigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Haryani, Harun (2009) Buckling Behavior Of Laminates Composite Under Compressive Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Noor Khairunissa, Nasar (2009) Rawatan Sisa Air Basuhan Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nurbaya, Tamin (2009) Improvement Of The Reactor Feed Pump Performance By Implying Six Sigma Method Using The Dmaic Phases. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nurul Haiza, Mahmud (2009) Improvement Of Strength And Formability Of Aluminum Alloy Sheet By Artificial Aging Treatment (Application For Car Body Panel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Solahadden, Jasmi (2009) Development Of Drying Rack For Household Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Stephen , Rachel Karen (2009) Analisis Kegagalan Pada Struktur Kerusi Kegunaan Pelajar Di Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suriatie , Ghazali (2009) The Study Of Square Plate Under Compression Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suthan, Erin (2009) The Analysis Of The Forces That Act On The Motorcycle Brake Pedal During Emergency Brake. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syauqi, Mohd Hashim (2009) Study Of External Nozzle Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Putra, Syed Ammar (2009) Analysis Of The Reliability Of Power Window System For Sedan Cars. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Tengku Nurul Izatulshima, T. Mohd Hashim (2009) Penyediaan Larutan Bahan Punar Untuk Aloi-Aloi Ferus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Yin Yin (2009) Investigation Of Air Flow In Chamber Using Air-Conditioning Unit For Thermal Comfort. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Toong, Chui Eng (2009) Study Of Heat Exchanger Effect In A Car Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

V

Voon, Shing Ling (2009) Study Of Palm Oil Fiber For Filtration Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wan Hairilamei, Nik Wan Zainun (2009) Reka Bentuk Sampul Bangunan Untuk Penjimatan Tenaga. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohamad Nohsa , Wan Yaacob (2009) Kesan Penggunaan Alat Penjimat Bahanapi Ke Atas Prestasi Enjin. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wong, Adam Yung Seng (2009) Effect Of Air Velocity And Equivalence Ratio On Solid Waste Combustion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Jian Hua (2009) Conceptual Design Of Thermoelectric Power Generation (TEG) For Automotive Waste Heat Recovery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong , Jian Hua (2009) Conceptual Design Of Thermoelectric Power Generator (TEG) For Automotive Waste Heat Recovery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yaacob, Norizal (2009) Study Of Centrifugal Pump Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, Choon Yuen (2009) Material Selection And Optimization Design For Car Side Door Impact Beam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, Kent Peng (2009) Computational Fluid Dynamics (CFD) Prediction Of Flow And Temperature Distribution In Drying Compartment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yew, Kheng Loon (2009) Vehicle Handling Improvement Using Steer By Wire Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zaidy, Zainudin (2009) Analisis Keboleharapan Dan Jangka Hayat Komponen Automotif Steering Knuckle Menggunakan CAE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zatil Hafila, Kamaruddin (2009) Kesan Proses Austenit Pembajaan Ke Atas Keluli Karbon Biasa. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zukhairi , Husin (2009) Pemodelan Pemindahan Haba Bagi Bangunan Yang Tipikal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulazrin, Ismail (2009) Simulation And Experimental Investigation On Magnetorheological Damper Characterization Using Sixth Order Polynomial Approached. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulazrin, Ismail (2009) Simulation and Experimental Investigation On Magnetorheological Damper Characterization Using Sixth Order Polynomial Approached. Project Report. UTeM, Melaka, Malaysia. (Submitted)