Items where Division is "Library > Final Year Project > FKM" and Year is 2015

Khairul Azman, Khalid (2015) Inventori Pelepasan Dari Sumber Bergerak Di Kawasan Tempat Letak Kereta Di Bawah Pentadbiran Melaka Bandaraya Bersejarah (MBMB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

Abd Rashid, Abd Rahim (2015) Pemanas Air Solar Kos Rendah Untuk Kegunaan Domestik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Paizal, Mohd Zain (2015) Analysis Of Preventive Maintenance For Processing Plant (Gassification Process Unit). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Nur Mu'izz, Abdullah (2015) Kajian Terhadap Pola Kitaran Aliran Udara Dalam Ruang Terkurung Dengan Sudut Lubang Dinding 45 Darjah (45°). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afiqah, Ngah Nasaruddin (2015) Energy Audit And Conservation Of Energy In Melaka: Case Study Of Library. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Arif Fahmi, Turin (2015) Comparative Evaluation Of Existing Product For Eco-Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid, Zaini (2015) Effect Of Surface Roughness On Tribological Properties Of PKAC-E Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nazrin, Ali@Yusof (2015) Analysis Of Heat Transfer In Portable Power Supply. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sabri, Zahari (2015) Effect Of Surface Roughness On Hydrogen Gas Production Rate In Alkaline Electrolyser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Shafie, Razak (2015) Comparative Study On Differene Approach Of Boothroyd Dewhurst (B-D) Design For Assembly Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ain Fathihah, Mohamed Yusoff (2015) The Effect Of Fibre Size, Fibre/Matrix Interphase Adhesion And Fibre Loading On Mechanical Properties Of Bio Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aisyah, Mohamad Jusoh (2015) Emission Inventory For Area Sources: Case Study For Workshop. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizuddin Fahmi, Mohd Riduan (2015) Modelling And Simulation Of Cylinder Deactivation System Applied To Passenger Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Afham, Sulaiman (2015) Design And Analysis A Reliable And Comfortable Seat For Bicycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amira Khalida, Mohd Nasir (2015) Methane Production From Co Digestion Of Chicken Manure With Agricultural Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ammer Ezhar, Mohd Razalli (2015) Fatigue Analysis Of Steering Knuckle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar Naimi, Arsat (2015) Study On The Properties Of Parts Manufactured Using Fused Deposition Modeling (FDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aqmal Hisyam, Hamzah (2015) Remotely Operated Contruction Robot Tele-Operation Command And Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Anuar (2015) Penyiasatan Perambatan Gelombang Akustik Terhadap Lapisan Konkrit Struktur Bertetulang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan, Surahman (2015) Friction Analysis Of Common Engine Lubricant In The Market For UTeM Formula Varsity Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan Soffian, Borhan (2015) Estimate The Life Cycle Of Roller By Experiment And Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azril Shafizam, Mohamad (2015) Experimental Investigation Of Engine Performance And Emission For Biodiesel At Various Storage Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Cho, Hon Meng (2015) Turbulence Modeling Verification For Bluff Body Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cho, Wei Yang (2015) The Effect Of Plate Geometry On Flow And Heat Transfer Across A Parallel Plate Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Sheng Wah (2015) Topological Optimization Of Vehicle Jack For Weight Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chu, Hun Wei (2015) Design Of Solar-Powered Garden Light With Motion Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

Dayang Nor Fatin, Mahmud (2015) Comparative Tribological Investigation Of Bio-Lubricant Formulated From Waste Cooking Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Devan, Sanmugam (2015) Springback Deformation Measurement Of Composite Using 3D Scanner After Curing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

Efariani, Abdul Rahim (2015) Finite Element (FE) Analysis Of Drum Brake System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fadhli, Harun (2015) Parametric Study Of Biodiesel Blend Of Different Ratio (B70, B80 And B90). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadrah Hanim, Ad Suhadak (2015) Transesterification Of Used Frying Oil And Optimization For Biodiesel Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faiz Adzhar, Abdul Halim (2015) Kajian Berkaitan Sumber Kawasan Pelepasan Inventori Bagi Taman Perumahan Di Kawasan Majlis Bandaraya Melaka Bersejarah (MBMB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faris, Azman (2015) Parametric Study Of Biodiesel Properties To The Storage Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fateh Sakinah, Abu Bakar (2015) Evaluation Of Energy Consumptions In Chicken Slaughtering Industry Using Cleaner Production Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Afiqah, Johari (2015) Prestasi Dan Emisi Enjin Diesel Menggunakan Minyak Masak Terpakai Pra-Pemanasan Sebagai Bahan Api. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Nabilahhuda, Zahari (2015) Thermal Properties And Heat Transfer Study Of Dispersed Fluid With Functionalized Multiwalled Carbon Nanotube Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Nur Athirah, Dol Malek (2015) The Effect Of Interfacial Bonding In The Mechanical Properties Of Degradable Polymer Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong, Shon Feng (2015) Design An Innovative Test Tube Washer For Science Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Wai Ken (2015) Design And Development Of Test Fixtures And Tools For Shear Test Of Fastener. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hafizuddin, Sharingat (2015) Wear Debris Detection And Analysis Of Automotive Engine Lubricating Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizuddin, Zainul (2015) Development Of A User-Friendly Shuttlecock Collector Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamizan Afandi, Rosadi (2015) Effect Of Excessive Electricity To The Thermal Conductivity Of An Automotive Electrical Supply Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hawford Harold, Sinpong (2015) Risk Assessment On Combined Cycle Power Plant Mechanical Maintenanance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Heng, Zheng Wang (2015) Fatigue And Fracture Behavior Of Al-Alloy Plates With U And V Notches Subjected To Fatigue Loadings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Jayadhasan, Jayaratnam (2015) Experimental Analysis On Biodiesel Production From Waste Cooking Oil Using Conventional Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kevin, Kong Tuck Hsien (2015) The Effects Of Cartilage Thickness On Cartilage Behaviour In Indentation Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Amri, Muhamad Tajuddin (2015) Engine Performance Analysis Using GT-Power Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Chee Iu (2015) The Application Of Oil Palm Fiber On Concrete Structure Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Mei Yin (2015) Air Flow And Temperature Distribution Analysis In An Air Conditioned Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lee, Sek Enn (2015) Control Mechanism Of Linear Electric Actuator For 3D Image Processing Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Guo Ren (2015) Biomechanical Characterisation Of Articular Cartilage Across Synovial Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Huey Tyng (2015) A Conceptual Design Approach On Thermal Food Container. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liyana Nur, Abdul Fadidz (2015) Mereka Bentuk Mekanisma Mesin Penghancur Sisa Makanan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Hao Zhe (2015) Process Optimization For Esterification From Non-Edible Rubber Seed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Luqman Hakim, Hamid (2015) Parametric Study Of Electric Power Generator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Martini, Mohmad (2015) Comparative Tribological Investigation Of Bio-Lubricant Formulated From Cooking Palm Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mashitah, Razi (2015) Effect Of Pineapple Leaf Fiber Length On The Properties Of Pineapple Fiber : Starch Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mastura, Mutafa (2015) Investigation Of Hydraulic Piston Due To Contamination. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazidah, Bakhari (2015) Merekabentuk Dan Menganalisis Sebuah Pemanggang Barbeku Menggunakan Kuasa Solar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazuri, Mohamed (2015) Determination Defect And Mechanical Properties Of Carbon Steel Plate With Different Current Value Using SMAW Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohad Khalil, Mohad Khazin (2015) Root Cause Failure Investigation Of Boiler Super-Heater Tube In Coal Power Plant At Kapar, Klang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Adha, Mohd Pekeh (2015) Analisis Pemindahan Haba Bagi Penukar Haba Dalam Aliran Yang Berayun. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Aizat Hazraf, Mohd Sukri (2015) Effect Of Sliding Speed On Tribological Properties Of Elevated Temperature Palm Kernel Activated-Epoxy Composite (PKAC-E). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fais, Mohamed Zamri (2015) Penyiasatan Perambatan Gelombang Akustik Pada Struktur Konkrit Bertetulang Dengan Bar Keluli Tertanam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hanif, Puzizer (2015) Fatigue Study Of Aluminium Alloy At Different Temperatures In Faculty Of Mechanical Engineering, Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Qabil, Ismail (2015) Design Optimization Of Saddle Support For High Capacity Pressure Vessel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Razin, Rosli (2015) Guided Wave Defect Location In Plate Using Wavelet Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Tajuddin, Ramli (2015) Developing A Lego-Bot 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zuhaili, Jamaluddin (2015) Simulasi Ujian Impak Menggunakan Analisis Unsur Terhingga Pada Roda Rim Aloi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adnan Hafiz, Zahari (2015) A Study On The Effect Of Coconut Fiber To Polypropylene (PP) As A Friction Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asyraf, Asidin (2015) Development Of Emission Inventory Of Major Air Pollutants For Industry In Malacca History City Council. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fitri, Mustapha (2015) Determination Of Defect And Mechanical Properties For Tungsten Inert Gas (TIG) Welded Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Yaacob (2015) Ultilizing Bamboo As A Non-Fibrous Sound Absorber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Idzham Faiz, Idris (2015) Mengurangkan Kerugian Minyak Sawit Mentah Dengan Memisahkan Laluan Buah Lerai Dan Tandan Kosong Sebelum Thresher Proses Melalui Pengubah Suaian Rekabentuk Mekanikal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izuwan, Ismail (2015) Mereka Bentuk Sistem Pengumpulan Madu Kelulut Untuk Kegunaan SME. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Junaidi, Yusuf (2015) Effect Of Sliding Speed On Tribological Properties Of Palm Kernel Avtivated Carbon-Epoxy (PKAC-E) Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridhwan, Abd Rahim (2015) Kesan Jenis Anak Gelombang (Wavelet) Di Dalam Pengesanan Kerosakan Gear Bagi Isyarat Getaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzuan, Juma'at (2015) Control Design Of An Adaptive Prosthetic Leg For Amputees Using Magneto-Rheological Damper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahir, Mokhtar (2015) Development Of Emission Inventory Of Major Air Pollution For Point Source In Malacca Historic City Council. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq, Abu Bakar (2015) Penyediaan Peralatan Ujikaji Untuk Pembinaan Robot Binaan Tele-Operasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zarrul Syaffiq, Sabahar (2015) Kajian Terhadap Pola Kitaran Aliran Udara Dalam Ruang Terkurung Dengan Sudut Lubang Dinding Kosong Darjah (0°). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zubir, Othman (2015) Temperature Effect On Carbonization Of Water Hyacinth As A Solid Biofuel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Aszahare, Abdul (2015) Kesan Bebanan Keluli Tahan Karat Terhadap Ciri-Ciri Komposit Grafit Polipropilena Untuk Plat Dwi Kutub. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Irfan Rafiq, Azmi (2015) Fundamental Tribological Study Of Refined Glycerine, Oleic Methyl Ester And Crude Glycerol For Engineering Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khairudin, Mohamad Rus (2015) Investigation of Mechanical Properties For The Dry Carbon Composite Fabricated By Using Resin Transfer Molding Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khairyl Fitri, Mohd Mokhtar (2015) Analytical Modelling And Free Vibration Analysis Of Rectangular Plate With An Arbitrarily Oriented Surface Crack. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Saufi, Ismail (2015) Design And Analysis Of Speed Limiter Device For A Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad 'Izzat Naqiuddin, Ramli (2015) Mesin Penapis Air Mudah Alih Untuk Aktiviti Luar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afdhal, Nazan (2015) Design And Development Kossel Mini 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ameirul Suffian, Mat Pauji (2015) The Evaluating Of Water Utilisation From Palm Oil Mill Industry Using Cleaner Production Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Arshad, Mohtar (2015) Membangunkan Sistem Bagi Mengangkat Tempat Duduk Tandas Menggunakan Hidraulik Air. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Bukhari, Baharuddin (2015) Co2 Capture From Exhaust Gas To Improve Fuel Economy In Single Cylinder Diesel Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faez, Abd Rahman (2015) Effect Of Aeration System In Recreational Lake In UTeM Main Campus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fahmi, Noordin (2015) Reed Grass As Sustainable Sound Absorber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafizuddin, Mohd Gazali (2015) Densification Of Durian Peel Waste As A Solid Biofuel : Effect Of Binder Ratio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hizran, Kamaludin (2015) Development Of Pack Boronizing For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hudzaifah, Abdul Habib (2015) Design And Vibrational Analysis Of Electric Power Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Musfarezal, Mustafa (2015) Development Of A Low Cost 3D Scanner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Naim, Ismail (2015) Design And Fabrication Of Economic Patient Bed Attachment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Naqiuddin, Samarul Fuad (2015) Binder Effect On Densification Of Cow Manure As A Solid Biofuel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nazrul, Mohd Yusoff (2015) Product Design Improvement Using Design For Manufacture And Assembly (DFMA) Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Qamarul Naqib, Palil (2015) Analysis Of Efficiency Of Solar PV With Solar Tracking System In Malaysia Climate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Rosli Hidayat, Noor Salim (2015) Performance Evaluation Of Nano-Coolant Multi-Walled Nanotube (MWNT) Particles In Ethylene Glycol. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shamil, Mohamed Taib (2015) Wear Analysis Of Common Engine Lubricant In The Market For UTeM Formula Varsity Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shazwan, Abdul Razak (2015) Effect Of Size PZT Elements On The Excitation Of Phased Array Tranducer In Beam Steering And Beam Focusing Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, M Radzali (2015) Design Of Reactor For Plastic Recycling Through Pyrolysis Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, Safiza (2015) Mobile Source Emission Inventory In MBMB Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syazwan Fahmi, Romli (2015) Evaluation Of Energy Usage From Palm Oil Mill Industry Using Cleaner Production Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syazwi, Mohd Faudze (2015) Investigation Of Characteristics And Applications Of 3-D Printer Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zul Fikri, Suhaimi (2015) The Analysis Of Fluid Structure Interaction For Submersible Water-Hydraulic Manipulator Using Computational Fluid Dynamics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zul Iqbal, Che Ismail (2015) Design And Maintenance Of Mantle Crusher. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Nabiha, Pathil (2015) Finite Element Analysis Of Strain Signal From Charpy Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nadhira Fathiah, Kamarulzaman (2015) Performance Comparison Between CNG And Petrol Fuel In Internal Combustion Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazrul Faiz, Yahaya (2015) Kajian Pencemaran Dan Inventori Pelepasan Untuk Perumahan Di Kawasan Majlis Perbandaran Melaka Bersejarah (MBMB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ngeow, Sook Chin (2015) A Comparative Study On The Design Efficiency Of Products Using DFMA Methods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Asekin, Md Yasukin (2015) Energy And Thermal Comfort Analysis For Air Conditioning And Ventilation System In Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Shakinah, Rudzlan Apandi (2015) Penambahbaikkan Rekabentuk Alat Mengutip Buah Relai Kelapa Sawit Dengan Menggunakan Kaedah TRIZ. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Aishah, Mat Jam (2015) The Investigation Of Flow Distribution In Duct Channel Configuration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Salihah, Zaini (2015) Stability And Thermal Characteristics Of Carbon Nanofiber (CNF) Water-Based Nanofluids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Shazwan Azrul, Norazni (2015) Analysis On Surface Texturing Design For Wear Protection Of Automotive Engine Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhafis, Samat (2015) The Design And Fabrication Of An Oil Vacuum Cleaner For Industrial Use. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhazreel Saifullah, Baharin (2015) Design And Analysis Of Jacking Point Structure To Lift Heavy-Weight Crude Oil Tank For Annular Plate Maintenance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norisam, Ahmad Saidi (2015) Design For Manufacturing Of Portable Power Supply Housing Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Normasleha, Yasin (2015) Optimization Of Organic Candle Green Production From Waste Cooking Oil (Effect Of Ratio Of Oil Crystallizer To Waste Cooking Oil). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aizatul ' Ain, Md Zahir (2015) Design And Analysis Of Local Fruit’s Pole Picker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Amalina, Mustafa (2015) Development Of New Shower Head Based On Water Flow Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Amarina, Mahmood (2015) The Effect Of Coupling Agent On The Mechanical Properties Of PLA-Based Polymer Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ameelia, Rosli (2015) Air And Fuel Flow Analysis Of A Single Cylinder Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asma Atikah, Mohd Razikin (2015) Design Green Food Packaging For Take Away Hot Dishes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farah Izyan, Abd Rahman (2015) Moving Part Combination Using Effort Flow Analysis (EFA) Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Haziqah, Mohd Ruzmi (2015) Project Solid Fuel From A Binary Mixture Of Waste Materials Of Palm Oil Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Irsyad, Mohamad Thani (2015) Mereka Bentuk Dan Membangunkan Pemetik Buah Kelapa Berinovasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur' Syafiqah, Ismuini (2015) Propose And Design A Canvas Shoes Cleaner Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Asyilah, Zakaria (2015) Application Of Plastic Bottle Waste On Lightweight Composite Structure Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Fahima, Mohd Kamel (2015) Lamb Wave Propagation In Plate With Different Depth Of Corrosion Defect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Farhana Izzati, Mohamad Nazri (2015) Effect Of Yeast Content As Foaming Agent On The Mechanical Properties Of Titanium Foam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hamizah, Mohamed (2015) Study Of Acoustic Performance Of Seminar Halls In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hana, Md Zuki (2015) Investigation Of Corrosion Rate Of SS316 Plate Inside An Alkaline Electrolyzer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Jannah, Baharudin (2015) Analisis Terhadap Faktor-faktor Yang Memberi Kesan Kepada Kebolehtelapan Struktur Sel Semulajadi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Najwa, Wahab (2015) Emission Inventory For Area Sources: Case Study For Petrol Station. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Yasmin, Mokhtar (2015) Analysis Of Wind Loading On Solar Panel At Different Inclination Angles In Malacca Weather Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Q

Qurratu' Aini, Yaacob (2015) The Effect Of Dispersion On The Mechanical Properties Of PLA-Based Polymer Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Raja Afiq Al-Hakimi, Raja Tajuddin (2015) An Assessement Of Cylinder Deactivation Implementation Using A Race Sytyle Exhaust Manifold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razlan, Razali (2015) Design, Analysis And Fabrication Of Regenerative Automotive Suspension System Test RIG Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razmeer Azarin, Rashid (2015) Crash Simulation For The Evaluation Of Safety Barrier Against Vehicle Impact At Different Angle And Tonnage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roy Hanson, Jimit (2015) Analysis Of Preventive Maintenance Planning For Hydrogen Manufacturing Unit (HMU) In Shell MDS (M) Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

Saafuan Ali, Tukiran (2015) Design And Simulation Of Guided Wave Transmitter For Inspection On Concrete Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saifuddin, Omar (2015) The Effects Of Two Different Materials (Alloy Steel T91 & Carbon Steel) Of Boiler Tube. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarafali, Akbar (2015) Wind Charger For Low Wind Speed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarvin Ram, Seriramulu (2015) Optimizing Biodiesel Production From Rubber Seed Oil Using Conventional Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahidatul Mouna, Maulat Shahidan (2015) Investigation On Factor That Influence The Pack Boronizing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharmeezam, Mat (2015) Pollution Investigation And Emission Inventory For Restaurant In MBMB Region. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hajar Adni, Mustaffa (2015) Penambahbaikan Rekabentuk Mesin Mengutip Buah Relai Kelapa Sawit Berkuasa Motor Elektrik Dengan Kaedah TRIZ. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hazirah, Sharuddin (2015) Area Source Of Emission Inventory For Restaurant And Night Market In MBMB Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Masyita, Noraziman (2015) Methane Production From Co – Digestion Of Chicken Manure With Decanter Cake From Palm Oil Industry Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Najatul Aishah, Majid (2015) Design And Fabricate The Model Of An Innovative Plucking Device For Salak Fruit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Norlina Atasya, Abdul Rahim (2015) Energy And Thermal Comfort Analysis For ACMV System In Academic Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nur Azreen, Ayub (2015) The Effect Of Fibre Type, Size, And Fibre Architecture On The Mechanical Properties Of Bio Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syahrulnizam, Mokhtaruddin (2015) The Effect Of Frequency On Flow And Heat Transfer Of A Heat Exchanger In An Oscillatory Flow Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syarifah Norfatin, Syed Idrus (2015) Experimental Investigation Of Thermal Conductivity, Viscosity, Specific Heat And Heat Transfer Properties Of CNF-Based Nanofluids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syawal, Symsul (2015) Kesan Gentian Kaca Ke Atas Polipropilena (PP) Sebagai Bahan Geseran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazwan Ariff, Mohd Yunus (2015) Design And Develop An Efficient Aeration System For Tasik UTeM-Aeration Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Tainsing, Josua (2015) Vibration Control Of A Coupled Cylinder Under Rotational Motion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Mean Yee (2015) The Effects Of Surface Curvature On Biomechanical Behaviour Of Articular Cartilage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Jia Wei (2015) Effect Of Yaw Angle On The Aerodynamics Performance Of Rear Spoiler-By CFD Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teh, Chee Khoon (2015) The Effect Of Carbon Nanotube On The Properties Of Graphite, Carbon Black And Epoxy Composite For The Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Ahmad Hafiz, Tengku Din (2015) Using Image Processing And Quantitative Technique To Determine The Onset Of Gear Failure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Asmazatul Adawiah, Tengku Abdul Kadir (2015) Effect Of Binder And Fillers Ratio On The Properties Of Graphite/Carbon Black/Epoxy Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Ezura, Tengku Mansor (2015) Design And Testing Of Automation Control For Mini Gula Melaka Production System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Thaqif, Hat (2015) Design And Develop An Intergrated System For Lake Water Treatment At UTeM’s Lake – Filtration Device And Debris Collection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Theng, Kai Xuan (2015) Indoor Air Investigation Using CFD Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tio, Kok Wei (2015) Effect Of Formation Temperature On The Properties Of Graphite/Stannum/Polypropylene Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Too, Pei Pei (2015) Application Of Bagasse Waste On Lightweight Composite Structure Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wan Muhammad Asri, Mokhtar (2015) Design Of Adjustable Wheel Nut Remover. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nurazri, Wan Bukhari (2015) Development Of Prosthetic Leg Using Magnetorheological Damper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

William Granetin, Thomas (2015) Investigation Of Exergy Analysis In Vapour Compression Refrigeration System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Peek Hui (2015) Energy And Thermal Comfort Analysis For University Library. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yeow, Eu Jin (2015) Determine Tensile Properties Of Dry Carbon Reinforced Epoxy Composite Using Hand Layup Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Zi Wha (2015) Research Viration On Wideband Linear Resonant Generator Energy Harvesting Device For Remote Sensing Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zaidi, Zolkefle (2015) Study The Behaviour Of Different Elements In Ansys Finite Elements Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaim Zakwan, Mohamad (2015) Penyiasatan Perambatan Gelombang Akustik Pada Struktur Konkrit Bertetulang Dengan Batu Baur Tertanam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zatil Hazika, Kamaruddin (2015) Preliminary Study On The Effect Of Composition To The Mechanical Properties Of Epoxy Lalang Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)