Design For Manufacturing Of Portable Power Supply Housing Prototype

Norisam, Ahmad Saidi (2015) Design For Manufacturing Of Portable Power Supply Housing Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Text (24 pages) Design For Manufacturing Of Portable Power Supply Housing Prototype 24 Pages.pdf - Submitted Version Download (322kB)

Abstract

Nowadays the world is moving on too fast in all edge and one of them is the technology. People today really are relying on the electric to support their home appliance all day such as refrigerator, washing machine, television and fan. The improvement in gadget world also makes people need a source of power to support their device. Portable power supply become a necessity to most of the people today but sadly, portable power supply that are in the market nowadays can only support small appliances. So, this is why this project is being conducted. This project is about the design and manufacturing of a new housing for a portable power supply portable. The portable power supply for this project can produce up to 2 kW power. The portable power supply must have a good and attractive design for commercial purpose. In this project, three designs of the housing was produced and one of them will be chosen for its best performance. Selection of material will be made among several options of materials. After the weighted decision matrix was filled with the data, ABS material was chosen between the two materials to be the prototype material.. Then, design two was chosen between the other two designs and the design was going through some modification to make it more attractive. Lastly, the material was confirmed and the prototype of the housing were fabricated. Some analysis of the design was being computed and it shows that the design is safe for the fabrication it is also suitable for its purpose.

Actions (login required)

View Item