Items where Subject is "T Technology > TP Chemical technology"

Siti Hajar , Abd Rahman (2008) A Study On Hardness Of Porcelain Body Sintered At Various Temperatures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

Ab Rahim, Muhammad Syakir (2017) An Experimental Investigation Of Performance And Gasseous Exhaust Emission Of A Diesel Engine Using Blends Of A Vegetable Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahman, Fateihah (2017) Investigation Of Tribological Performance Of Waste Lubricating Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razab, Huzaimah (2017) A Study On Tensile Properties Of Acrylnitrile Butadiene Styrene (ABS) Subjected To Thermal Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razak, Muhammad Nur Asyraf (2016) Effect Of Oil Palm Trunk (OPT) And Oil Palm Frond (OPF) Fiber To Physical And Mechanical Properties Of Polyurethane (PU). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abbdul Faiz, Anuar (2013) Effect Of Injection Machine Parameters On The Warpage Of Dumbbell Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Latif, Muhammad Anas (2019) Design And Development Of Injection Mold For Plastic Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Majid, Nur Izzati (2017) A Study On Bending Properties Of Acrylonitrile Butadiene Styrene (ABS) Subjected To Thermal Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Manaf, Edeerozey and Mohamad, Noraiham and Munawar, Rose Farahiyan and Shamsuddin, Zurina and Abd Latif, Mohd Juzaili (2018) Thermoformability Study Of Oil Palm Shell Derived Carbon Black-Kenaf (OPS-KENAF) Thermoplastic Lightweight Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Nadia Adriena (2016) Effect of injection moulding parameters on material characteristic of two plate mould with different material using flow analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rasid, Jaafar (2009) Study And Analysis The Effectiveness CAD-CAM System In Mold Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Yazid, Nurul Shuhadah (2016) Effect of Poly Vinyl Alcohol (PVA) on the size of Linseed Oil (LO) microcapsule self-healing coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Mohamad Adib (2020) Optimal Design For Production Of Green Diesel From Integrated Oil Palm Biomass Derived Alcohols Bio-Refinery. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Sallehuddin Kaus (2018) Design And Analysis For Development Of Portable Air Cooler Using Phase Change Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Basit , Kamaludin (2013) Pembentukan mendapan bahan bakar diesel dan bio-diesel pada suhu permukaan melebihi suhu Kadar Pengewapan Maksimum (MEP). Project Report. UTeM, Melaka. (Submitted)

Abdul Fattah , Mohd Tahir (2008) Effect Of Air Arrangement On Wood Combustion Through CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz , Hashim (2013) To determine alkaline catalyst for the jatropha oil biodiesel production. Project Report. UTeM, Melaka. (Submitted)

Abdul Halim, Amiera Husna (2019) Conversion Of Jatropha Curcas Oil To Biodiesel Using Heterogeneous Catalyst Via Microwave Irradiation Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hameed, Mohamed Aslam (2016) Optimisation Of Tyre Pressure And Fuel Type Towards Fuel Efficiency Using Design Of Experiment Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Mohd Firdaus (2020) Mechanical Properties Of Specimens 3D-Printed Recycled Polylactic Acid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Raheem, Abdul Mueezz (2018) The Effect Of Carbon Nanotube Aspect Ratio On The Functional Properties Of Electrically Conductive Adhesives. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman , Mat Rejab (2010) Develop Heating System Using By Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Ahmad Tarmizi (2009) Kajian Terhadap Kekuatan Rekabentuk Tangki Gas Petroleum Cecair (LPG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Asyraf (2016) Leftover Rice Starch From Food Waste To Bio-Based Plastic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahab, Muhamad Hafiz (2016) Automation Deflashing System For Blow Moulded Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdull Hanif , Abdull Rahman (2013) Microstructural Study On Different Type Of Biodiesel Fuel For Automotive. Project Report. UTeM, Melaka. (Submitted)

Abdullah, Asma Nor Hidayah (2016) Systematic Development Of Injection Mold : A Convocation Souvenir. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Nor Fazliyana (2015) Design and analysis of the optimum gate size for multi-cavity plastic name card injection mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Mohamaad Syafiq (2016) Automation Deflasher Mechanism For Blow Moulded Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Mohd Fairuznizam (2017) Flat plastic part optimization in injection moulding of pure polypropylene and polypropylene with talc using Taguchi method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adenan, Muhammad Zulfan Amier (2019) Development Of LPG Gas Monitoring By Using MQ6 Sensor To Detect Leakage In The Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Anis Adrina (2018) Microwave Transesterification Of Waste Cooking Oil (WCO) Using Waste Cockles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Agus Setyo, Budi and Safarudin Gazali, Herawan and Mohd. Nizam, Ayob and Asmala , Ahmad and KT, Lau (2006) Investigation Of The Structure And Properties Of Phosphate Based Glasses. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Azriadih (2016) FE Modelling Of Tensile Behaviour Composite Material Using Altair Hyperworks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azhar, Izzaim Danish Fathullah (2017) Electrostatic Chamber Development For Dust Collector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizol, Ismail (2009) Comparison Of Two And Three Plate Molds Plastic Injection Molding For Mold Design Selection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid, Zaini (2015) Effect Of Surface Roughness On Tribological Properties Of PKAC-E Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fariz, Faizal Lim (2008) The Study Of Optimum Condition To Produce Rubber Induced Polymer (Polyethylene). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Khushaini, ntan Nuraina (2021) Tensile behavior of electrospun polyacrylonitrile (PAN) nanofiber membrane for water desalination process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Lutfi , Dahari (2013) Menilai prestasi enjin diesel menggunakan campuran minyak sayuran dengan diesel sebagai bahan api. Project Report. UTeM, Melaka. (Submitted)

Ahmad Rashdi, Mohammad Amirul Yaziid (2018) Development Of Automatic Gas Leakage Detector System Using Arduino and Global System Mobile Module For Domestic Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Razli, Mohd Faez (2016) Gas Leakage Monitoring Over The Net With Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Siaman, Muhamad Afiq Hakimi (2023) An analysis on energy consumption of injection moulding process using neural network. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Sufi, Abdullah (2008) Brikueting Panas Habuk Kayu. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tajudin, Ahmad Farhan (2017) Fluidized bed granulation process : effect of chamber and binder temperature on granule physical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Termizi, Nadiah (2015) Design a dustpan and analyze the optimum injection molding parameters for a gate location. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alif Zulfakar , Pokaad (2008) Kecekapan Haba Ekzos Dan Penggunaan Bahan Api Tentu Brek (BSFC) Enjin Diesel Dengan Bahan Api Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amira Khalida, Mohd Nasir (2015) Methane Production From Co Digestion Of Chicken Manure With Agricultural Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiruddin , Shahipurullah (2013) Investigation Of Extracting Oil From Waste Palm Fruit Fibre. Project Report. UTeM, Melaka. (Submitted)

Amirul Asyraf, Mat Nasir (2013) Preparation And Characterization Of Green Rubber Foam From Reclaimed Rubber Glove. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirullah , Amran (2013) Bahan api pepejal daripada sisa bahan buangan industri minyak kelapa sawit. Project Report. UTeM, Melaka. (Submitted)

Anas, Azmi (2008) Rekabentuk Mixer Untuk Kenderaan Berkuasa Gas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arzmi, Muhammad Syafiq (2015) Design and analysis of the optimum gate size for single cavity plastic name card holder injection mold. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azemi, Muhammad Zikri Hakim (2017) Kajian Mengenai Minyak Biji Sesawi Sebagai Bahan Api Alternatif Untuk Enjin Diesel Satu Silinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Muhammad Aiman (2019) Preparation And Characterization Of PP/rPP Blends At Different Formulation Ratio By Injection Moulding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Nor Asyiqin (2023) Characterization of zinc oxide coated polymer optical fiber for limonene concentration measurement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Zaim (2018) Effect Of Type Of Substrates To Conductive Ink Under Thermal Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azril Shafizam, Mohamad (2015) Experimental Investigation Of Engine Performance And Emission For Biodiesel At Various Storage Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrin, Aqilah Husna (2018) Microwave Assisted Transesterification Of Jatropha Oil Over Natural Waste Cockles Catalyst Of Biodiesel Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrin , Mohamad Effandy (2007) The Improvement And Fabrication Of New Breather Valve For Oil And Gas Industry. Project Report. Melaka, Malaysia, UTeM. (Submitted)

B

Badek Ruzaman, Badiu Nasrullah (2019) Evaluation Of Electrical Conductivity(EC) For Fertilzer Solution Of Venturi Fertilizer System (VFS) Using Design Of Experiment(DOT) Analysis For Agriculture Fertigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bagas, Wardono (2009) Advance Machining of Industrial Graphite Electrodes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bakar, Amar Zikri (2019) Microwave Effect On Biodiesel Production From Hevea Brasiliensis Using Anadara Granosa Shell. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bakar, Faridzuan (2019) Development Of Zinc Oxide (ZnO) Nanoflower For Electron Transport Material Of Dye-Sensitized Solar Cell. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bok , Chiew Loon (2010) Emission Characteristic Of Alkaline-Catalysts Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Chai, Jiuan Hua (2008) Design And Development Of Plastic Injection Mould With Concurrent Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Manshor, Miftahuddin (2016) The Development Of Hydrogen Generator By Using Water Electrolysis For Small Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, Ngee Siong (2017) Optimisation Of The Mechanical Properties Of The Engineering Plastics Via Optimal Processing Parameters Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Choy Wen (2014) A Study Of Consumer Perception On Nanotechnology In Cosmetic Products In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kat Meng (2008) Design Validation And Development Of Plastic Injection Mould Cavity For Plastic Container Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kah Chun (2020) Degradation Behaviour Of O-Ring Elastomer Subjected To Palm Biodiesel Immersion. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chin, Sin Yi (2015) A Portable Embedded Gas Leakage Detection Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin , Su Fok (2007) Degradation Behavior Of PVC-LDPE Blend. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Choir, Yek Guan (2022) Characterization of biaxially oriented polypropylene (BOPP) films containing baggy web defect. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Chon, Yu Yun (2016) Preparation and characterization of nano-alumina filled HDPE conducting polymer composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Shiau Ling (2017) Optimization Of Flexural Strength For ABS Plastic Via Optimal Processing Parameters Using Taguchi Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chua, Lian Kai (2018) Study The Absorption And Regeneration Of Desiccant Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chung, See Ern (2019) Investigation Of Curling Effect Of 3D-Printed ABS Structure On Different Print Bed Temperatures And Surfaces. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

D

Dalila, Nizam (2009) Membangunkan Sistem Larut Lesap Untuk Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dulah Aspa, Muhammad Luqman Nulhakim (2023) Surface modification of mild steel using alumina powder ceramic particles and TIG torch welding. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

E

Eric, Jau Jeffrey (2012) Performance Of A Condenser With Cooper Oxide (II) Nanoparticles Suspended Into Host Refrigerant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fadhli, Harun (2015) Parametric Study Of Biodiesel Blend Of Different Ratio (B70, B80 And B90). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhlizil Fariz, Md Saad (2009) The Design And Development Of Warning Device For Low Pressure LPG Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadrah Hanim, Ad Suhadak (2015) Transesterification Of Used Frying Oil And Optimization For Biodiesel Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizal , Zainol (2007) Gage Capability Study of Thin Film Coating Roughness Measurement Method Using Profilometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Masron (2012) The Mechanical Properties Of Polypropylene/Polylactic Acid (PP-PLA) Polymer Blends. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Nasir, Abdul-Fattah (2016) Biodiesel Production Using Waste Cooking Oil Through The Microwave Irradiation And Conventional Method Using Cockle As Catalyst. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faris, Azman (2015) Parametric Study Of Biodiesel Properties To The Storage Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Afiqah, Johari (2015) Prestasi Dan Emisi Enjin Diesel Menggunakan Minyak Masak Terpakai Pra-Pemanasan Sebagai Bahan Api. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Nabilah, Rosly (2013) Design And Analysis Of Polypropylene Plastic Name Card Holder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firdaus Fadzilah, Husani (2008) Design And Fabrication Of Street Light Using Modern Product Development Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firdaus Hakimi, Hassan (2010) Determination Of The Optimum Design Parameters For A Family Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hamsani, Nurul Fatiehah (2016) Innovative Packaging Design To Enhance The Performance Toward Global Market At Bumiputra SME's Food Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Nur Habibah (2018) A Study On Gasoline Engine Fuel Octane Numbers Using Accelerometer Analyzing With Multi Statistical Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanis , Hasnul (2007) Rekabentuk Sistem Pembungkusan Untuk Menghasilkan Produk Nata De Coco. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Harlina, Ngah (2009) Study Of The Thermal Properties Of Chitosan Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Roslan (2017) Optimization of compression molding process for NR/EPDM elastomeric material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassan, Syalman (2019) Characterization Of Fuel Delivery System Components Immersed In Different Ratio Of Palm Oil Blended With Diesel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hazalifah , Zainal Abidin (2013) Tribological properties of waste vegetable oil biodiesel using-alkaline-based potassium hydroxide (KOH) catalyst. Project Report. UTeM, Melaka. (Submitted)

Hazwani, Hilmi (2013) Effect Of Mixing Ratio On The Mechanical Properties Of Polypropylene Composite. Project Report. UTeM, Melaka. (Submitted)

Husaini, Abdullah (2008) A Precision Assembly In Plastic Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussain, Noor Wahidayu (2012) Pembuatan Dan Karakterisasi Kitosan Dari Sisa Kulit Udang Dan Cengkerang Ketam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Idris, Maspin (2005) Ciri-Ciri Pemindahan Haba Bagi Aliran Tidak Mantap Pada Muncung Tersantak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Norain and Zakaria, Muhammad Zulfattah and Ahmad, Umi Hayati and Mohd Yusof, Norfadzlia and Mohd Zain, Raeihah and Md Isa, Mohamed Hafiz (2017) Optimization Of Grain Size And Moisture Content Of Young Coconut Shell And Coir (YCSC) Using Cutting-Extracting-Drying Method For Pelletization Preparation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ing, Wai Ming (2021) Investigating The Oxidation Stability Of Palm Oil By Using Different Type Of Antioxidant Additive. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Muhammad Ariff (2016) Biofuel Fire Starter From Empty Fruit Bunches Of Oil Palm Fruit Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Ahmad Afiq Afifi (2018) Investigation And Analyse Of Cooling System For Motorcycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Elma Elisa (2018) Study On The Electrical Conductivity Temperature Relationship In Seawater Using Chi-Square Independence Test. Project Report. UTeM, 24. (Submitted)

Ismail, Muhammad Adib (2019) Mould Flow Analysis Based Product Development For Plastic Injection Moulding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismaniza, Ismail (2008) Study On The Performance Of Carbon Adsorbent In LPG Tank Small Engine Fuelled By LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izan Shukrizal, Shukor (2008) Penyediaan Serbuk Hidroksiapatit Melalui Teknik Sol Gel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzaidi Fairus, Ismail (2008) Design Of Chemical Mixer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Ja'afar, Muhammad Waris (2016) Optimization Of Biodiesel Production From The Waste Cooking Oil Using Response Surface Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamadi, Aida Haryati (2019) The Effect Of Alkaline Treatment On The Mechanical And Physical Properties Of Kenaf Fibre Reinforced Vinyl Ester Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamal, Tukiman (2008) The Adoption And Implementation Of Best Practice In Biotech Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamalluddin, Nor Asyiqien Atilah (2019) Effect Of Temperature And Concentration Of Urea Solution In Urea Impregnation Process Into Biochar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Muhammad Izzul (2017) Development of ultrasonic assisted compression moulding mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jari, Noor Azril Firdaus (2019) Development Of Liquid Gas Petroleum (LPG) Leakage Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jayadhasan, Jayaratnam (2015) Experimental Analysis On Biodiesel Production From Waste Cooking Oil Using Conventional Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ja’afar Husni, Muhammad Nizamuddin (2023) The study of physical and environmental characterization of sago starch mixture with glycerol. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Jeevaanand, Ramanathan (2005) Irreversibility Factors Of Refrigeration System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Justin, Lasa (2009) Kajian Terhadap Kesesuaian Rekabentuk Pengewap Yang Digunakan Dalam Kenderaan LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kamaldeen, Amir Farhan (2017) Evaluation Of Fuel Properties Behaviour Of Biodiesel From Different Oil Stock. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul' Arifin, Iffah Syakirah (2020) Design And Analysis Of Bending And Stretchable Testing Apparatus For Conductive Ink. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamrul Zaman, Nur Najwa Aqilah (2017) Formulation of green printing ink for ceramic subtrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairol Hafiz, Haris (2006) Design And Fabricate Mould System In Plastic Injection Moulding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anuar , Mohd Nor (2008) Quality Improvement Using Classical Method Concept In Injection Molding Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairun Nasuha, Ambar (2008) Study In The Effect Of Compatibilizer On The Properties Of Oil Palm Shell Powder Filled Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalid, Nurul Ain (2021) The effect of free vibration energy on conductive ink. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

King, Ivy Chien Chien (2016) Optimization Of Injection Molding Process On Name Tag Plastic Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Hoi Ern (2019) Characterization Of Adhesive Layer Of Laminating Pressed Flexible Printed Circuit Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Ching Yee (2017) Design Of Cooling System For Two Plate Mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Lee, Kar Lian (2008) Computer Aided Mould Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Yoong Ler (2019) Design And Analysis Of Food Container In Plastic Injection Molding Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Jia Qi (2012) Development Of Hydro-Atomized Spraying System For A Controlled Environment Aeroponic Farm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Cui Fen (2016) Optimization Of Injection Molding Process On Name Tag Plastic Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Huey Tyng (2015) A Conceptual Design Approach On Thermal Food Container. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Ruoh Lin (2017) Effect of thermal cycles on tensile properties of NR/EPDM nanocomposites for engine mounting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Thian Mee (2023) Synthesis, optical and semiconductor characterization of molybdenum diselenide (MoSe2) thin films. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Loh, Mun Kong (2017) Fluidized bed granulation process : study on airflow effect on urea granule physical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loh , Yin Kuan (2008) The Relationship Between Grain Sizes And Hardness Of Sintered Alumina Product. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lum , Yip Hing (2011) An Investigation On Effect Of Colorant Pigment On The Mechanical Properties Of Polyoxymethylene Copolymer In Long Gear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Mahmod, Amirul Rasyid (2017) Hardness and microstructure of cockle shell powder filled recycled polyethyelene-terephthalate/polycarbonate blends. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahmud Khalil, Lias (2008) A Study Of Optimum Condition To Produce Rubber Induced (Polypropylene). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Manogran, Devaki (2019) Characterization Of Acrlonitrile Butadiene Styrene – Hexagonal Boron Nitride Composite For 3D Printing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Amin, Nur Amirah (2018) Product Design And Development Of Organic Waste Composter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Dan, Reduan and Ahmad, Asmala and Tee, Boon Tuan and Zakaria, Muhammad Zulfattah (2017) Thermal Management Fundamental Investigation On Alternator Regeneration System With Combined Gasoline-Hydrogen Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazizi , Mohamed (2013) Emisi prestasi enjin diesel menggunakan campuran biodiesel sawit dengan bahan aditif sebagai bahan api. Project Report. UTeM, Melaka. (Submitted)

Mazlan, Mohamad Aqmal (2018) Study Of Cooling System Design For iPhone Case. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazliah , Mazlan (2011) Innovative Thermoplastic Starch Based Biodegradable Packaging For Food Industies Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Nasir, Muhammad Afiq (2016) Portable Artificial Nose To Detect Chicken Meat Spoilage Using Ammonia Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Salleh, Muhammad Iqbal (2017) Biodegradability of commercial plastic bags. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md. Akhir, Muhammad Syafiq (2023) Preparation and characterization of linseed/tung oil-filled urea–formaldehyde microcapsules and their effect on mechanical properties of an epoxy-based coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mirun, Nur Aini (2017) Investigation On Reliability Of Using Signal Processing As Refrigerant Pressure Detector. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohajir, Muhammad Faiz (2018) Effect Of Waste Mussels On Biodiesel Production From Rubber Seed Oil Using Microwave Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Aisamudin , Shuhaimi (2013) Effect of carbon black on the properties of graphite-epoxy composite for bipolar plate. Project Report. UTeM, Melaka. (Submitted)

Mohamad Fadzil, Nurzurida (2022) Effect of processing parameter on hydrolysis method to produce titanium dioxide for thermal spray process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Fikri , Mohamad Yunus (2009) Fabrikasi Dan Memasang Alat Pemampat Gas Petroleum Cecair (GPC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Isa, Mohamad Saifullah Adha (2017) Gas leakage detector using Arduino and GSM module with SMS alert and sound alarm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Kasim, Khairul Anwar Adhwa (2015) Manufacturing, assembly and trial of core and cavity plastic injection mould for two-plate family mould testing specimens. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Suhaimi, Mohamad Izmi Aliff (2018) Biodiesel Production From Jatropha Curcas Oil Via Microwave Irradiation Using Waste Mussel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Bakri, Muhamad Firdaus (2023) Development and structure analysis for trendy scooter using recyclable material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad Ali, Nur Fatihatur Rawdhah (2019) Formulation Of Green Printing Ink From Waste Cooking Oil For Digital Printing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adnin, Muhammad Iqmal (2023) Analysis of chemicals elements on treated waste cooking oil for the organic crayons. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Ali, Muhammad Haris Izzuddin (2019) Bio-Degradable Grease Formulation Using Fresh Palm Oil As Precursor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aminuddin, Arif Fikri (2018) Development Of Pico Energy Generation Via Leachate Water As Fuel (Reactor Design And Hardware). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asraf , Abd. Samad (2008) Mencipta Dan Memajukan Alat Penghantaran Dan Pengisian Mudah LPG Dari Tangki Komersial Ke Tangki Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azali, Noor Syahida (2016) The Impact Of Different Octane Numbers On Performance And Emission Gasses On The Naturally Aspirated Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Nur Izzati (2019) Simulation Study Of Drying Chamber For Marine Product. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Azril , Mohd Azli (2011) Potential Of Carbon Black Electrostatic Filler For The Automotive Paint Coating Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi Adli , Salahuddin (2013) Investigation on diesel engine performance using the second generation of biodiesel and its blend /. Project Report. UTeM. (Submitted)

Mohd Fairuz , Roslan (2007) Merekabentuk Dan Membangunkan Tangki LPG Dilengkapi Dengan Alat Pemanas Untuk Kenderaan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Faiz , Hamizan (2009) Kajian Terhadap Rekabentuk Injap Solenoid Bagi Sistem Gas Petroleum Cecair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafidzal, Mohd Hanafi (2012) Investigation Size Of Soot Particle Behaviour Using Biodiesel By Computational And Experimental Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiq Iquan , Mohd Yusoff (2007) An Improvement Of Drinking Water Container Design Focusing On Structural Aspect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Hamzah (2008) Penyediaan Bahan Piezo Seramik Melalui Gabungan Sol-Gel Dan Pemprosesan Seramik Secara Konvensional. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizul Hanif , Ramlee (2010) "Susu Maker"; Exterior Design And Milk Powder Dispenser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haizal , Mohd Husin and Mohd Ridzuan, Nordin and Imran Syakir, Mohamad and Liew, Kong Yong (2006) Recovery, Regeneration , And Reuse Of Spent Bleaching Clay From Palm Oil Refining Waste Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanif, Harun (2005) Prestasi Kitaran Sistem Penyejukan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Isa, Muhammad Syamim (2021) Study The Drying Kinetic Of Food Products By Using Solar Dryer And Open Sun Drying. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Isa, Nur Farah Adlia (2019) Design And Development Of Recycle Plastic Wall Panel Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Jamal, Abu (2005) Harmonic Filter Design For Induction Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jamaluddin, Muhammad Al-Faaruuq (2020) Effect Of Biodiesel Concentrations On Swelling Properties Of Polymer Based O-Ring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamal, Mohd Faridz (2017) Mechanical Properties Of Components Fabricated Via Low Cost Additive Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamal Haslin, Mohd Kamarul Nazreen (2018) Improvement And Analysis Of Cooling System For Motorcycle Jacket By Using Phase Change Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Kamarul Shaufi, Rasidi (2011) Design And Machining Of Core And Cavity For Injection Moulding Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kassim, Mohammad Khairul Azmi (2016) Influence of air speed and spray pressure on urea granule physical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Khairul Al'fat'hah , Izman (2013) Fencing Improvement At Palm Oil Mill To Reduce Costly Waste. Project Report. UTeM, Melaka. (Submitted)

Mohd Khalil, Mohd Zaki (2009) The Saving Of Fuel Usage In Generator By Using The Hho Gas From Electrolysis Of Water (Hydro Fuel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Lutfi , Azmy (2013) Impact of carbonization process on briquette from palm oil residue. Project Report. UTeM, Melaka. (Submitted)

Mohd Luthfi , Omar (2013) Effect of using the second generation biodiesel and its blend in the compression ignition engines. Project Report. UTeM, Melaka. (Submitted)

Mohd Nasir, Muhammad Hilmi (2020) Structural Sustainability Study For Production Of Advanced Biofuels From Integrated Oil Palm Biomass Biorefinery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasroldin, Nur Husna (2016) Influence Of Biodiesel Blending On Physical And Chemical Properties And Empirical Equation For Predicting The Properties Of Biodiesel Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasrul, Baharudin (2006) Analysis Of Biomass Gasifies To Produce Fuel Gas Using Palm Oil Waste In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazeri, Muamar Zil Haniff (2020) Engine Performance Of Biodiesel From Non-Edible Oils Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazilah, Nurul Shaffiqa (2022) Preparation and characterization of r-PP/PLA biodegradable thermoplastic blend. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nor, Afifah Raihana (2017) Preparation and characterization of PU/GNPs nanocomposites foam. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nor Azmi , Mohd Tarmiji (2013) Biodiesel production from waste vegetables oil using catalyzed transesterification. Project Report. UTeM, Melaka. (Submitted)

Mohd Norhishamudin , Mohamed Azlanudin (2011) Design And Finite Element Analysis Of HIP Joint Prothesis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nur Shafiq , Ahmad Razimi (2013) Co-processing of coconut shell and sugarcane residue as solid biofuel. Project Report. UTeM, Melaka. (Submitted)

Mohd Rahimin, Nazirul Mubin (2021) Study The Effect Of Reflector On Solar Dryer Performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Rasid, Muhammad Nur Alif (2021) Hydrophobiciy of electrospun polyacrylonitrile (PAN) nanofiber membrane for water desalination process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ridzuan, Nordin and Mohd Haizal , Mohd Husin and Imran Syakir, Mohamad and Raihani, Md. Kasim (2006) Technological Component And Its Impact On The Success Of SMI In Skin Care Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Safuan, Anuar (2012) Development Of Hydroxyapatite/Chitosan Composite Powder Via Mechanical Milling Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syazwan , Solah (2007) Kajian Pembangunan Komponen LPG Untuk Kenderaan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Mohd Yusof, Mohd Zulfadli (2017) Modelling Of Coal Combustion In A Combustor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zarawi, Nor Sharmila (2018) Application Of Microwave Energy For Biodiesel Production Using Rubber Seed Oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zin, Ameir Asyraff (2016) Investigation of mechanical properties of plastic product for two plate family mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zin, Mohammad Taufik (2017) Parametric Study On Hydronic Wall Cooling System Using Domestic Pipe As A Radiant System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zubir, Othman (2015) Temperature Effect On Carbonization Of Water Hyacinth As A Solid Biofuel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhilmi, Nawang (2008) Design Validation And Development Of Handphone Housing Plastic Injection Mould (Carity). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Fizree, Zainal Abidin (2013) Investigate Surface Integrity When Machining FC300 Cast Iron Using Uncoated Carbide Ball End Mill : Study Of Surface Profile. Project Report. UTeM, Melaka. (Submitted)

Mohidin, Nur Amira (2017) An Investigation Of Acrylonitrile Butadiene Styrene (ABS) Impact Properties Subjected To Thermal Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mokhtar, Mohamad Hafiszi (2019) Performance Of Double Chamber Microbial Fuel Cell Based On Different Type Of Wastewater And Electrodes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Raus, Nur Liana Anira (2019) Characterization On The Natural Source Properties For Digital Printing Ink From Waste Cooking Oil Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad , Muhammadin (2011) Preparation And Characterization Of Waste Fruit Starch Filled Polypropylene Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Affendi, Mustafa (2008) Analysis About The Effect Of Composition Of Green Bodies On Mullite Bonded Silicon Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aiman, Yusof (2011) The Effects of Process Parameters In Injection Moulding On Surface Quality Of A Polypropylene (PP) Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Danial Azraei, Azlan (2019) Fabrication Of Alumina-Copper Composites By Using Resistive Sintering Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Faiz , Mohd (2012) Physical Characterization Of Urea-Lignin Fertilizer Granule. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fakhrur Radzi , Sa'adon (2013) Carbonisation temperature effect on preparation of biochar from tanduk banana peel residue (musa paradisiaca fa. corniculata) as a solid biofuel. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hafidz, Ibrahim (2009) Pressurized Pyrolysis Of Wood Dust. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafizuddin, Mohd Gazali (2015) Densification Of Durian Peel Waste As A Solid Biofuel : Effect Of Binder Ratio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haikal , Hisam (2010) A Study On The Impact Of Injection Molding Parameters On The Processed Plastic Product Dimensional Stability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Idzhar, Ishak (2010) A Study On The Structural Integrity Of Octagonal Shape Bottle Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izhar, Abdul Raob (2008) Determination Of Effects On Different Compositions Of Polymer Blend Through Extrusion Process And The Mechanical Properties Of An ABS- PVC-LD PE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izzat Iqbal, Supandi (2015) Design And Fabricate Mold For Polymer Based Interlocking Tiles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Khidir , Abdul Rahman (2009) A Study On The Optimum Natural Gas Storage Tank Design Using The Gas Adsorbent Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Lutfi , Abdul Latif (2008) Vacuum System Design For Fry Drying. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Naqiuddin, Samarul Fuad (2015) Binder Effect On Densification Of Cow Manure As A Solid Biofuel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Redzuan, Tajuddin (2008) Membangunkan Teknik Pembersihan Untuk Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, M Radzali (2015) Design Of Reactor For Plastic Recycling Through Pyrolysis Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yazuan , Yaakup (2012) Physical Characterization Of Urea Binder Extrude At Various Weight Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zaim, Azamam (2013) Characterization Of Epoxidised Natural Rubber Ethylene Propylene Diene Monomer (ENR-EPDM) Blend Prepared Via Solution Mixing In Toluene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Nurafiz, Hussein (2010) Gas Powered Model Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

N. Vijayakumar, Jagatheskumar (2018) Developing A Multi Water Droplets Evaporative Cooling System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nabil Fikri , Ahmad (2013) Fuel characteristics of biodiesel from waste vegetables oil using alkaline based catalysts. Project Report. UTeM, Melaka. (Submitted)

Nabila Huda, Azmi (2015) The study of consumer awareness of environmental food packaging technology in Malacca City. Project Report. UTeM. (Submitted)

Naim Husni , Latif (2009) Study On Typical Emission From Diesel Engine Fueled With Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Najla Shazwani , Din (2009) Failure Analysis Of Conductive Paint Coating Using Electrochemistry Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasarudin, Mohd Amir Azrie (2022) Friction and wear characteristics of biodiesel fuel derived from palm oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Shih Chien (2020) Microsturcture Observation Of Plasma-Sprayed Ti0² Coating On Mild Steel Substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nicholas Lian, Ak Mujah (2012) Heat Transfer Charactericstic Of A Condenser With AI203 Refrigerant Based Nanofluids As Working Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nizamuddin, Osman (2015) Effect Of Fuel Octane Rating On Engine Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Abidah, Abdul Aziz (2013) The Potential Of Epoxidized Natural Rubber As Hydrophobic Contributor In Biodegrdable Urea Fertilizer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azimah , Mohamad (2008) Vacuum Vessel Design For Fry Drying. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azizah , Salim (2011) The Effect Of Material And Tool Properties On The Chemical And Physical Properties Of Coolant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norafzan , Mohd Ranai (2008) Determination Of The Effects On Different Compositions Of Polymer Blend Through Extrusion Process And The Mechanical Properties Of An PVC-PP-ABS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazhar, Ali (2005) Polymer Blends - PP/HDPE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norfairuz , Mansor (2009) Kajian Kemungkinan Menghasilkan Bahan Bakar (Biofuel) Alternatif Daripada Ubi Kayu Dan Merekabentuk Dapur Gas Etanol. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhabib, Mohd Kamin (2009) Study On The Effect Performance Of Carbon Adsorbent With Different Term Of Size And Method In LPG Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norizan, An'nisa (2017) Standard Minimum Thickness Of A Commercial Available Polypropylene And Polycarbonate Of A Name Card Holder. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norman , Omar (2007) Analysis Of Plastic Flow In Two Plate Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Normasleha, Yasin (2015) Optimization Of Organic Candle Green Production From Waste Cooking Oil (Effect Of Ratio Of Oil Crystallizer To Waste Cooking Oil). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asila, Esa (2015) Mechanical Properties Of Acrylonitrile -Butadiene Styrene-(ABS) Filled With Cockle Shell Powder(CSP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asma Atikah, Mohd Razikin (2015) Design Green Food Packaging For Take Away Hot Dishes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hanisah, Jasmi (2015) Experimental Study Of Different Hot Flue Air Speed Effects On Young Coconut Grain Moisture Level And Resulting Retention Time At Fixed Hot Flue Air Temperature. Project Report. UTeM, Faculty of Engineering Technology . (Submitted)

Nur Haziqah, Mohd Ruzmi (2015) Project Solid Fuel From A Binary Mixture Of Waste Materials Of Palm Oil Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Rifhan, Rosli (2010) The Effect Of Sintering Temperature And Clay Addition On Glass Ceramic Produced From Recycled Glass For Structural Application (CIP Method). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Sabrina , Basharuddin (2013) A study on the effects of parameters for optimizing biodiesel production. Project Report. UTeM, Melaka. (Submitted)

Nuraida , Mohd Ramlee (2007) Process Optimization For Plastic Injection Mould Case Study-Container Mould. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nurhafiza , Zinalass (2015) Design and simulation of cooling channel for plastic injection moulding. Project Report. UTeM. (Submitted)

Nurhashima, Shafiee (2010) Sintering Characteristics Of Injection Moulded Components Using Waste Rubber Biopolymer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhidayah, Hamdan (2009) Development Of Magneto Electrolysis For Hydrogen Generator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul 'Ain , Haris (2009) Preparation And Characterization Of Ceramic Porcelain Prepared Through Slip Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Asima , Zainon (2007) Kajian Kebolehlaksanaan Metanol Sebagai Bahan Api Enjin. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Nurul Syarafina , Sholahuddin (2007) Analysis Of Plastic Flow Inside The Three Plate Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Othman, Muhammad Amin (2018) Hygrothermal Aging Effect On Reliability Performance Of Electrically Conductive Adhesives (ECA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Mohd Dzul Fazley (2020) Effect Of Hybridization On The Functional Properties Of Nanocarbon-Based Electrically Conductive Adhesive (ECA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Muhammad Iskandar (2016) Development Of Biodegradable Plastic With Natural Sources As Packaging Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

P

Phang, Advin Kok Seng (2017) Optimization of bio active porous poly (lactic acid) scaffold for biomedical materials. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

R

R Mohamad Faudzi, Raja Mohamad Fareeq (2019) Environmental And Physical Properties Of Thermoplastic Cassava StarchBeeswax Reinforced With Cogon Grass Fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rahim, Masitah (2017) Effect Of Palm Oil Trunk Dust To Polyurethane Noise Reduction Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Mohamed, Raja Nor Azrini (2014) Examining Health And Safety Management System Effectiveness In Oil And Gas Training Company In Bangi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rajendran, Vikeish (2018) Development Of Plastic Bottle String Stripper. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramakrishnan, Karthigeyan (2015) Enhance The Performance Of Condenser By Using Evaporative Cooling Method For Split Type Air Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramlan, Muhammad Saifulazwan (2017) Study On Desalination Of Seawater By Water Hyacinth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli , Junid (2006) A Study On UV Curing Process Of Polymeric Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rashid, Nur Shazwanie (2018) Development Of New Filament Wire From Sugarcane Bagasse Fibre Reinforced Thermoplastic Composites As Feed Stock For Fused Deposition Modelling (FDM) Using Extrusion Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rasid, Raziman (2020) Optimization Of Physiochemical Properties For Cleaner Diesel With Alcohol From Oil Palm Biomass As Additive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rasidan, Basiron (2008) Effect Of gasifier Dimension On Wood Combustion Through CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rasmi, Noramalina (2017) Preparation And Characterization Of Polyurethane Filled Waste Tyre Dust (PU-WTD) Composite Foam For Noise Absorption Medium. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roshman, Rozlina (2014) Renewable Energy Adoption As Energy Efficiency : A Case Study Of Biomass Conversion To Biofuels In Petronas Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosidah, Jaafar (2007) Design And Analysis of Plastic Injection Moulded Part For Two Plate Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Nur Saidatul Akmal (2016) Production And Characterization Of Biodiesel Derived From Palm Oil And Waste Cooking Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Muhammad Tirmidzi Al Bakri (2017) Design, Analysis And Development Of Tennis Court Dryer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Noramira (2021) A study on the physical and mechanical changes of nitrile rubber in palm oil biodiesel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Nursolehah (2017) Optimization Of Biodiesel Fuel Using Edible Vegetable Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Siti Najihah (2017) Tensile Behavior Study Of Polypropylene At Different ASH Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozlan , Ramli (2007) Mereka Bentuk Tangki Kenderaan Gas Asli. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Ruslan, Rohaizad (2016) Effect Of Powder Polypropylene Size On The Properties Of Graphite-Stannum-Polypropylene Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

Saad, Ainur Fazliani (2022) Preparation and characterization of nanocellulose from orange peel waste. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Sabarudin, Sabirah Sorfina (2020) Optimization Of Injection Moulding Parameters To Reduce Warp Age On Acrylonitrile Butadiene Styrene (ABS) Dog Bone Part Using Tagucid Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Safarudin Gazali, Herawan and Khisbullah, Hudha and Muhamad Syamsul, Hadi (2010) Study and development of LPG vehicle using carbon adsorbent in fuel tank for increasing storage capacity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safarudin Gazali , Herawan and Imran Syakir, Mohamad and Mohd Haizal , Mohd Husin and Ahmad Anas, Yusof and Ernie, Mat Tokit (2003) Carbon Molecular Sieve From Waste Material (Coconut Shell, Oil Palm Shell, Plastic Bag). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safarudin Gazali , Herawan and Imran Syakir, Mohamad and Mohd Haizal , Mohd Husin and Ahmad Anas, Yusof and Suhaimi, Misha and Imanurezeki, Mohamad (2005) The Effect Of Plastic Bag In The Base Char Of Carbon Adsorbent From Waste Materials (Oil Palm Shell) Due To LPG Adsorption Capacity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safarudin Gazali , Herawan and Ridzuan, Nordin and Imran Syakir, Mohamad and Mohd Haizal , Mohd Husin and Ahmad Anas, Yusof and Suhaimi, Misha and Imanurezeki, Mohamad (2005) The Comparison Of LPG And Natural Gas Adsorption Capacity In Carbon Adsorbent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saifol Azman , Nordin (2007) Gage Capability Study Of Thin Film Coating Thickness Measurement Method Using Scanning Electron Microscopes (SEM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saiful, Muhammad Fernanda (2022) Effect of biodiesel production based on zinc oxide supported silica oxide catalyst. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salbanu, Said (2007) Reverse Engineering Of Hand Phone Housing Plastic Injection Molding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salman, Rabiatul Adawiyah (2018) Experimental Investigation On Biodegradable Material In Yielding Fertilizer For Home Appliances. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salmidi, Taraji (2011) Die Design and Optimization To Reduce Cavity In Extrusion Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saqinah , Bakri (2009) Study On Performance Of Vacuum Fry Drying System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarvin Ram, Seriramulu (2015) Optimizing Biodiesel Production From Rubber Seed Oil Using Conventional Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sha'arani, Fatin Izzati (2016) Optimization of injection moulding parameters of three plate injection mould using flow analysis software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shafarul, Mustafa (2011) Synthesis Of Activated Carbon From Waste Raw Material Using 'Buluh Lemang' SCHIZOSCHYUM BRACHYCLADUM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrum Amlee, Syuhadatul Nadia (2017) Preparation and characterization of polyurethane filled bentonite composites foams. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sharif, Mohd Luqman Hakim (2019) Optimzation Of Biodiesel Production From An Edible Oil And Its Characterization By Using Response Surface Methodology (RSM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shawal, Nur Shuhada (2017) Preparation and characterization of polyol using waste cooking oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shellahmutto, Sakthivel (2018) Investigation of block copolymer effect on the physical and mechanical properties of retort cast polypropylene (RCPP) for food packaging film. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sin, Chu Woon (2013) Design And Development Of Thermal Food Container. Project Report. UTeM, Melaka. (Submitted)

Siti Aisyah, Safuan (2013) Thermal Absorption Properties Of Spent Tea Leaf Filled Polyurethane Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hasnaa, Zainal (2015) Effect Of ZDDP Addition in Canola Oil As Antioxidizing Agent For Lubrication Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Khadijah, Bharum (2013) Design And Analysis Of Resin Transfer Mould For Composite Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Masyita, Noraziman (2015) Methane Production From Co – Digestion Of Chicken Manure With Decanter Cake From Palm Oil Industry Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Noor Elyina, Ab Zarim (2008) The Use of MGO as Sintering Aid for Alumina Ceramics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nor Mazian, Embran (2006) Biotechnology Info Kiosk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Norfaznie , Ahmad Najib (2009) Fabrication Of Dense Alumina Through Slip Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nurhashima, Ismail (2015) Domestic LPG Leakage Detection System Using Microcontroller And GSM Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Sarah , Zahari (2013) The heat transfer phenomenon within volumetric receiver of concentrated solar tower using Diamond Like Carbon (DLC) material. Project Report. UTeM, Melaka. (Submitted)

Siti Saudah , Mohd Nasir (2007) Information Requirement For Mould And Die Process Planning Activities. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Sivagiganesan, Dhayalan (2019) Design And Construction Of Food Waste-Biogas System For Small Scale Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sow, Jin Huat (2019) Functional Properties Of Electrically Conductive Adhesives As Interconnect Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suberi, Hanis Amira (2016) Effect of surfactant on the surface integrity of stainless steel using EDM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suhaila , Yacob (2007) Study The Parameter Optimization In The Injection Molding. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Suhaimee, Muhamed Emeer Shazreef (2019) Design Improvement Of The Deflasher Mechanism For Blow Molding Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sulaiman, Mohd Amri and Che Haron, Che Hassan and A. Ghani, Jaharah and Rahman, Md Nizam and Mohamad, Effendi and Ali, Mohd Amran and Salleh, Mohd Shukor and Mat, Siti Asiyah and Ab. Razak, Muhammad Shahmi (2018) A New Approach Of Cryogenic CO2 Cooling In High Speed Turning Of Titanium Alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Sullyfaizura, Mohd Rawi (2006) Investigate Of Parameter Setting In Plastic Injection Molding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sy Ahmad Fairuz , Yulaimi (2007) Mengoptimumkan Pengisian Gas Petroleum Cecair (LPG) Daripada Tangki Komersial Kepada Tangki Kenderaan. Project Report. Melaka, Malaysia, UTeM. (Submitted)

T

Tahir, Nur Hazwani (2016) Processing And Characterization Of Polycaprolactone (PCL) : Sago Starch Blends As Biodegradable Polymers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tallip, Juriyanna (2017) Optimization Of Tribological Performance For Filtration Waste Cooking Oil Enhance By Nanoparticles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Ming Yee (2019) Adhesion Integrity Of Epoxy Paste On Thermoplastic Polyurethane(TPU). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Xin Yi (2017) Effect of plastomer on mechanical properties and characteristics of frozen cast polypropylene film for food packaging. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tay , Yon Yon (2010) Simulation Of Biodiesel Production From Used Frying Oil (UFO) Using Alkaline - Based Catalysts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Chun Earn (2013) Design and fabrication of polyvinyl chloride tie-rod cylinder for low pressure water hydraulic system. Project Report. UTeM, Melaka. (Submitted)

Tham, Jie Yi (2019) Performance Comparison Between Different Type Of Evaporative Cooling Systems. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Thong, Ming Chuin (2013) Redesign Of Bombardier PUTRA LRT Seat. Project Report. UTeM, Melaka. (Submitted)

U

Ujih, Aenderson Chaong (2023) An investigation of the effectiveness of the MAPP compatibiliser on the 3D printing filament properties made from wood dust/recycled pp composite (r-WOPPC). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Umizhatul Najwa , Jamaludin (2015) Design and analysis of injection moulding feed system of automotive part by using Taguchi approach. Project Report. UTeM. (Submitted)

V

Vathivellu, Yogavinoothon (2016) Injection Moulding Protection System Controller. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Vejekumaran, Dharshini (2019) Optimization Parameters Of Injection Moulding Machine For Reducing Warpage On Polypropylene (PP) Dog Bone Part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

W

Wan Hussin, Wan Hiqmal Hisyam (2017) Flexural Behaviour Study Of Polypropylene At Different Ash Filler Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mazuwan , Wan Azhal (2008) Fabrication And Characterization Of Oil Palm Shell Powder Filled Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Zhafran , Wan Zulkiffeli (2008) Kajian Tentang Komposisi Seramik Berasaskan Campuran Alumina Di Dalam Penggunaan Sebagai Penapis Air Akuarium. Project Report. UTeM, Melaka, Malaysia. (Submitted)

William, Dalglish (2022) Preparation and characterization of natural rubber compound using treated and untreated waste cooking oil as green processing oils. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

William Granetin, Thomas (2015) Investigation Of Exergy Analysis In Vapour Compression Refrigeration System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wo, Angeline Weng Wei (2016) Production and characterization of fibrillated nanocellulose fiber derived from spent tea leaves. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Shin Fhui (2020) A Study Of Drying Chamber Integrated With Solar Collector Using Computational Fluid Dynamics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Yung Cheng (2016) Analysis of sound absorption properties of spent tea leaves-polypropylene composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong , Peng Liang (2008) The Adoption And The Implementation Of Best Practice In Malaysia Biotech Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yahya, Sahrul Bakyah (2017) Design and analysis of gating in plastic paper clip mold. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yap, Pei Yung (2010) Biodiesel Production From Used Frying Oil (UFO) Using Alkaline-Based Catalysts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yew, Wai Keai (2010) Diesel Engine Performances Of Alkaline-Catalyst UFO Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Chin Yi (2015) Design And Development Of Customized Drinking Bottle Cap For SME. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yunos, Siti Nurfadillah (2020) Statistical Optimization Transesterification Of Waste Cooking Oil (WCO) Towards High Quality Polyols. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusmady, Mohamed Arifin and Safarudin Ghazali, Herawan (2011) A Study Of Diesel And Bio-Diesel Fuels Deposit Formation Due To Fuel Spray Impingement. Project Report. UTeM. (Submitted)

Z

Zahar, Mohamad Yusri (2017) Analysis Frequent Failures In Electrostatic Precipitator To Measure Efficiency At Coal-Fired Power Plant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainal, Muhammad Izzat (2018) Design And Analysis For Development Of Natural Based Food Packaging Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainal Abidin, Mohd Izzat (2017) Design and analysis of plastic injection mould using multiple cavity mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainudin, Muhammad Deenni Huzair (2022) Optimization of cooling system using simulation software in injection moulding. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Ahmad Zikri (2016) Design and analysis of a plastic book mark injection mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zubaidi, Nur Zurain (2016) Analysis comparison between solidworks plastics and simulation moldflow adviser of optimum gate size for the design of a single cavity plastic name card holder mold. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkiply, Fariz (2020) Experimental Analysis Of Lubrication Of B30 Biodiesel For Fuel Injector System. Project Report. UTeM, Melaka, Malaysia. (Submitted)