Items where Division is "Library > Final Year Project > FKM" and Year is 2017

A

AL-Hadhrami, Riadh Abdul Rahman (2017) Investigation Of Minimum Water Consumption At PCB Manufacturing Industry Using Water Pinch Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Halim, Nabilah (2017) Effects Of Boronizing On Sharp Cornered Metal Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahim, Muhammad Syakir (2017) An Experimental Investigation Of Performance And Gasseous Exhaust Emission Of A Diesel Engine Using Blends Of A Vegetable Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahim, Siddiiq (2017) Investigation On Turbine Blade's Performance By Using 3-Dimensional CFD. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ab Rahman, Fateihah (2017) Investigation Of Tribological Performance Of Waste Lubricating Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razab, Huzaimah (2017) A Study On Tensile Properties Of Acrylnitrile Butadiene Styrene (ABS) Subjected To Thermal Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab. Razak, Muhammad Amirul Asyhraf (2017) Development Of Solar Based Water Circulation Machine For UTeM Lake. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Hamid, Mohd Sofian (2017) The Effect Of Slat And Flap To The Aerodynamics Performance Of An Airfoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Hamid, Muhammad Haziq (2017) Experimental Investigation On The Effect Of Fuel Temperature On The Performance Of Spark Ignition Engine With Hydrogen Peroxide-Gasoline Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Majid, Nur Izzati (2017) A Study On Bending Properties Of Acrylonitrile Butadiene Styrene (ABS) Subjected To Thermal Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Muin, Najihah (2017) Influence Of The Work Hardening On Springback Of The U-Bend 316L Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Mohamad Izreen (2017) Application Of Converted Mode For Defect Defection In Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Salleh, Mohamad Syazuan (2017) Study Of Cabin Temperature Of The Car Parked Under Various Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdillah, Azfar Solihin (2017) Mereka Bentuk Dan Fabrikasi Mesin Pemprosesan Bagi Penghasilan Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nurul Hidayah (2017) Implimentations Of Modern Tools To Improve Project Management At The Public Works Department (JKR). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Ghapar, Muhammad Faez (2017) Characterization Of A Wideband Nonlinear Vibration Absorber Using Curved Constrained Cantilever Beam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Munir, Muhammad Syafiq (2017) Thermal Stress Analysis On Disc Brake Rotor For NGV Vehicle By Using Finite Element Analysis (ANSYS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Rahman, Noor Farahana (2017) Applications Of Open-Source CAE Tools In Mechanical Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahab, Muhamad Syafiq (2017) The Model Of Deforming Mode Tube Under Axial Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Ahmad Sallehuddin (2017) Design And Development Of Dough Proofer Machine For SMI Bakery Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Akmal Abdul Rahim (2017) Spare Parts Optimization (Valve) For Boiler At Coal Fired Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohamad Alif Fayumi (2017) Design And Analysis Of Foldable Human Powered Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohd Syahron Naim (2017) Development Of Tire Pressure Alarm System For Motorcycles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azan, Amirah Diyana (2017) Effect Of Layer Thickness And Fill Angle On Flexural Properties Of Carbon Fibre Reinforced ABS Printed Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nordin, Mohd Firdaus (2017) Design Of Integrated 3D Printer Recycle Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusoff, Ahmad Ramadhan (2017) Application Of Knowledge Based Engineering In Designing Automobile Rim And Macros In CATIA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zahidi, Muhammad Zulfadli (2017) Experimental Study On The Effect Of Air-Fuel Ratio On Performance Of Spark Ignition Engine Fueled With H2O2 Gasoline Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aldarji, Adeb Ahmed Saeed (2017) A Study On The Effect Of Varying Fiber Contents To The Physical And Moisture Absorption Characteristics Of Hybrid Oil Palm Empty Fruit Bunch/Kenaf Reinforced High Density Polyethylene Composites For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Alexander (2017) Investigation Of Contamination In Ball Bearing Operated Under Hexagonal Boron Nitride (hBN) Nanoparticle Additives Mixed With Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Nor Hasrin Nadia (2017) A Statistical Model For Determining Friction And Wear Of SK11 Ball Bearing In Nanoparticles-Enhanced Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amat Sahari, Muhammad Haziq (2017) Effect Of Rolling And Heat Treatment On Mild Steel Plate. Project Report. UTeM, Melaka. (Submitted)

Anaam, AbdulRahman Taher Ahmed (2017) Study Air Flow Distribution In The Dryer System Through CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Abu Bakar (2017) Fungsi Kebarangkalian Ketumpatan Lekuk Penghampiran Dalam Penilaian Keboleharapan Pengeluaran Sistem Kuasa Hidro. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Nasri (2017) Foreign Material Detection In Agarwood Using Thermal Imaging Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Nurul Husnina (2017) The Effect Of High Frequency Wave In Vibro Acoustic Method For Crack Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayop Azmi, Faiz Aswad (2017) Improve Of Design And Analysis Of Hydraulic House Fence Opening Using Tap Water Pressure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayuob Sultan Saif, Alnadhari (2017) Effect Of Foil Width In Magnetostrictive Transducer On The Excited Longitudinal Wave In Pipe. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azemi, Muhammad Zikri Hakim (2017) Kajian Mengenai Minyak Biji Sesawi Sebagai Bahan Api Alternatif Untuk Enjin Diesel Satu Silinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azli, Siti Nurazeera (2017) The Effect Of Number Of Blades On Compressor Cascade Bladesperformance By Using 3D CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Yuhanis Aqilah (2017) Preliminary Study On The Effect Of Spray Coatings Parameter On Hydrophobic Coating Surfaces. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Azuwar (2017) Experimental Study On The Effect Of Vortex Generator To Aerodynamics Performance Of Aerofoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhamad Sahrul Izwan (2017) Active Suspension System Using Stability Augmentation System For Passenger Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Aliff Isyraq (2017) Comfort Parameters Tuning For Vehicle Suspension Pitch Motion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Borhan, Luqman Hakim (2017) The Effect Of Number Of Blades On Turbine Cascade Blade Performance By Using 3D CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Che Awang, Mohd Norazizi (2017) Determination Of Wear Metals In Automotive Lubricating Oils Using UV Spectrometry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mansor, Muhamad Syahir (2017) Rekabentuk Sistem Pengudaraan Bilik Berkuasa Suria. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chin, Chun Yok (2017) Design And Development Of Vacuum Forming Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chin, Jia Yu (2017) The Effect Of Flow Frequency On Heat Exchanger Used In Thermoacoustics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choe, Chee Foong (2017) Propose And Design A Tricycle With Cleaning Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Fei Ming (2017) To Design An Innovation Coconut Plucking Rod With Advance Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

Dharham, Dharmawan (2017) Electronic Throttle Body Tuning Using Non-Linear PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

Ghanasegaran, Yogeswaran (2017) Remote Controlled Construction System For Emergency Aftermath. Project Report. UTeM, Melaka. (Submitted)

H

Hafiz Afandi, Halida Hanim (2017) Cutting Tool Jig Design For Brake Disc Skimming Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Muhamad Haziq (2017) Acoustic Characteristic Of Pineapple Leaf Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Muhammad Faris (2017) Conceptual Design Of Drivetrain System For Beca Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Nur Hayati (2017) Performance Improvement Of Split Savonius Rotor By CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hong, Mun Hoh (2017) Development Of an Automated CFD-BASED Optimization Workflow For Automotive Aerodynamic Application. Project Report. UTeM, Melaka. (Submitted)

Huzamri, Mohd Sharimen Imran (2017) Reka Bentuk Model Sistem Pengudaraan Berkuasa Suria. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Idris, Mohamad Iqmal Faris (2017) Fatigue Strain Signal Behavior Of Automobile Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Nur Ilani (2017) Design And Analysis On Brake Disc Skimming Machine Holder With Transfer Gear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Ihsan (2017) Design And Development Of Wireless Braking System For Motorcycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Jamal Hussein, Jaavith Nazeem (2017) Remote-Controlled Electro-Pneumatic Actuator For Remote Response Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamil, Mohamad Hafiz (2017) Effect Of Fabric Covers On Improving Sound Absorption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jasni, Mohammad Hasrudzi (2017) Kajian Reka Bentuk Pada Struktur Mesin Penyiring Cakera Brek (UTeM). Project Report. UTeM, Melaka. (Submitted)

Johan, Muhammad Naiem (2017) Study Of Mechanical Properties On Fiberglass Reinforced Plastic Pipe Under Tensile And Bending Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johar, Ahmad Mustaqim (2017) Study On Ultra Capacitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kamaldeen, Amir Farhan (2017) Evaluation Of Fuel Properties Behaviour Of Biodiesel From Different Oil Stock. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamaruddin, Muhammad Syahzani (2017) Determination Of Stalling Region For Specific Turbine Blade's Profile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarudin, Noor Atiqah Syahirah (2017) Lighting Strategy For Building Energy Saving Ground Floor Of Campus Technology Universiti Teknikal Malaysia Melaka, UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamizi, Nursyafika (2017) Effect Of PLA As Bonding Agent On The Properties Of Pineapple Leaf Fibre-Starch Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Sheng Yi (2017) Design A Low Cost Hair Dryer Using DFMA Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Jedediah Meng Hoi (2017) Drag Coefficient Reduction Of A 30° Yaw Angle Cube Subjected To Active Flow Control Device By Means Of Numerical Investigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kusnan, Nur Izzati (2017) Preliminary Study On Effect Of Temperature On Hydrophobic Coating On Metal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lasunu, Kasmiah (2017) Wear Characteristics Of SK11 In Engine Oil And Nanoparticles-Enhanced Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Chun Khoon (2017) Study On Mechanical Properties Of Eco-Friendly Kenaf Fibre Reinforced Metal Laminate Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Jing Xian (2017) A Study On The Effect Of Machining Parameters, Machining Conditions And Materials On Surface Roughness In Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Johnnie Zhong Li (2017) Effects Of Boronizing On Grooved Metal Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Ming Young (2017) Effect Of Various Low Frequencies For Crack Detection In Non-Linear Vibro-Acoustic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chee Houh (2017) Investigation On The Effects Of Human Weight On Spinal Facet Joints Using Finite Elements Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Madzuki, Muhammad Ihsan (2017) Force Effects On Laminated Rubber-Metal Spring Using Transmissibility Test Numerical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maidin, Nur Fadhilah (2017) Application Of Coconut Fiber-PP Composite For Fabrication On Interior Part Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Manakor, Eswaran (2017) Characterisation Of Wideband Nonlinear Vibration Absorber Using Adjustable Magnetic Stiffness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Abas, Nur Hafizah (2017) Frictional Behavior Of SK11 In Engine Oil And Nanoparticles-Enhanced Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Pauzi, Muhammad Asrul (2017) Design Of Food Truck That Fulfill The Ergonomic Purposes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Noor, Muhamad Fahmi (2017) A Study On Impact Properties Of Hybrid Oil Palm Empty Fruit Bunch/Kenaf Reinforced High Density Polyethylene Composites For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Medon, Nurul Izzati (2017) Performance Comparison On PID And MIT Rule Approach For Electro-Pneumatic Position System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Moey, Chung Min (2017) Investigation On Flexural And Morphological Characteristics Of Novel Hybrid Oil Palm Empty Fruit Bunch/ Kenaf Reinforced High Density Polyethylene Composite For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azlan, Muhammad Hafiz Hakimi (2017) Noise Reduction Design Of A Vacuum Cleaner. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Jamil, Nur Najaa Mastura (2017) Effect On Vibration Amplitude In Aluminium Rectangular Plate Using Simulation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zainal Abidin, Syarafana (2017) Effect Of High Frequency Input Location For Crack Detection In Nonlinear Vibro-Acoustic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Abdul Ghani, Nik Muhammad Hazwan (2017) Tribological Properties Investigation For Nanoparticle Enhanced Natural Oil-Based Lubricant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nizar, Muhammad Safwan (2017) Influence Of Tire Stifness And Sprung Mass On Vehicle Ride Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Abbas, Saddam Hamood Ali (2017) Effect Of Defect Orientation In Pipe On Acoustic Wave Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Al-Ghaili, Munir Mohammed (2017) Experimental Studies On The Noise Characteristics Of Ball Bearing Under Hexagonal Boron Nitride (hBN) Nanoparticle Additives In Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ahadlin, Nur Farahin (2017) CFD Simulation Of A Shell And Tube Heat Exchanger; Effect Of Physical Features. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin, Muhammad Murtadza (2017) Experimental Investigation On Vibration And Shock Test On Packaging Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Anasir, Muhamad Arif Ikhwan (2017) Cooling Load Estimation Using Multimedia Facilities For Educational Purpose. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Arif, Nor Hidayu (2017) A Statistical Model For Deterimining Friction And Wear Of SK 11 In Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asannnan, Fitrasari (2017) The Application Of Pineapple Fibre Polypropylene (PP) Composite For Fabrication On Interior Part Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Mohamad Azizuddin (2017) Design Of Underwater Inspection Robot Mechanical Track System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Bakri, Mohamad Syahmi (2017) Investigation On Effect Of Error Order Selection In System Identification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Basahahruddin, Azny (2017) Effect Of Carbon Nanotube On The Properties Of Graphite-Carbon Black-Epoxy Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Basar, Jamaludin (2017) Thermal Performance Of Kenaf Composite By IES Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Syahirah (2017) Design Of Modular Smart Pick & Place Automation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farhan Han, Syaza Najwa (2017) Fatigue Analysis On Bonding Of Aluminium And Carbon Laminate Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamal, Mohd Faridz (2017) Mechanical Properties Of Components Fabricated Via Low Cost Additive Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kurmain, Muhammad Zuhri Zikirilah (2017) Testing Of Aircraft Composite Spoiler Hinges. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mesri, Mohamad Izzat (2017) Analisis Keselesaan Termal Pada Ruang Peralihan Dalam Kawasan Bangunan Menggunakan Pendekatan Ujikaji. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mokhtar, Abdul Azim Waqiuddin (2017) Evaluation Of RON Fuels Performance In Malaysian Market. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Mohamad Nazim (2017) Effect Of Stannum On The Properties Of Graphite/Stannum/Polyproplene Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor, Ahmad Afifi (2017) Design And Analysis Of Chassis Frame For Educational Racing Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Azinan, Muhammad Afiq (2017) Air And Fuel Flow Analysis Inside The Internal Combustion Engine With Overhead Cam. Project Report. UTeM, Melaka. (Submitted)

Mohd Shah, Azmeirul Azrie (2017) Finite Element Analysis Of Locally Manufactured Engine Mounting Components Under Cyclic Stresses And Thermal Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shobi, Asyraf Kasyidi (2017) Effect Of Bonding Agent On The Properties Of Pineapple Leaf Fibre Starch Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sobri, Ahmad Syazwan (2017) Ducting Design Studies Using Multimedia Platform For Educational Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yunus, Muhammad Hazim (2017) Characterization Of Fuel Additive For Fuel Saving And Injector Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusof, Khairul Aqil (2017) Design Of Modular-Based Underwater Inspection Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusof, Mohd Zulfadli (2017) Modelling Of Coal Combustion In A Combustor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yussof, Muhamad Firdaus (2017) Modelling Of Braking System On Series Hybrid Electric Vehicle Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohidin, Nur Amira (2017) An Investigation Of Acrylonitrile Butadiene Styrene (ABS) Impact Properties Subjected To Thermal Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohmad Nur, Nabiha (2017) Measurement Of Stress And Strain Of An Automotive Component Subjected To Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mong, Guo Ren (2017) A Coupled Simulation Method For A Vortex-Induced Vibration System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa, Amirul (2017) An Experimentel Study Of Laminated Rubber-Metal Spring On Axial Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa, Mohd Hafiz (2017) Design And Development Of Solar Toaster. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapa, Muhammad Aizat (2017) Experimental Investigation Of Thermal Performance Of Kenaf Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Naim, Mohamad Asyraf (2017) Analysis Of The Centrifugal Blower Performance With Different Dimension Configuration By Using ANSYS Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Najamhuri, Saiful Aizat (2017) Kesan Daripada Lokasi Getaran Berfrekuensi Rendah Untuk Mengesan Retak Dalam Kaedah Vibro-Akustik Taklinear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasri, Muhamad Khairul Nizam (2017) Thermal Stress Analysis On Formula Varsity (FV) Disc Brake Rotor By Using Finite Element Analysis (ANSYS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazifunnur, Nur Aiman Syahmi (2017) Three-Dimensional Simulation On Racing Car Rear Wing With And Without Drag Reduction System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Chin Sern (2017) Effect Of Wave Modulation Measured At Various Locations For Damage Detection Using Vibro-Acoustic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Kong Eng (2017) Investigation On Compressor Blade’s Profile Performance By Using 3D CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Wai Hoe (2017) Effects Of Process Parameters On Strength Of Polymer Lattice Structure Manufactured By Using 3D Printer. Project Report. UTeM, Melaka. (Submitted)

Norashid, Norjannahtul Ainah (2017) Buckling Behaviour And Instability Of Tapered Column Made Of Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordin, Mohd Faizz (2017) Antiroll Suspension System For Sport Utility Vehicles. Project Report. UTeM, Melaka,Malaysia. (Submitted)

O

Omar, Muhammad Asnawi (2017) Experimental Study On The Effect Of Intake Air Temperature On The Performance Of Spark Ignition Engine Fueled With Hydrogen Peroxide Blended With Gasoline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Xiong Hui (2017) The Saw Dust Filled Tube Under Axial Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Osman, Akhmal Firdaus (2017) Investigation Of Flame Stabilization In Counter Current Micro Combustors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

P

Pakhrazi, Mohamad Ainudin Kamel (2017) Waste Heat Recovery From Exhaust Gas Using Steam Turbine Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pilvamangalam, Nisallini (2017) A Study On Quasi Static Indentation Behaviour Of Kenaf Bast Fibre Reinforced Metal Laminate System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Ramli, Mohamad Syafiq Husni (2017) Analysis Of Pressure Transient In Hydraulic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rasiman, Nadia Ilysa (2017) Improving The Accuracy Of Open Source 3D Scanning Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raya, Muhammad Ariffin (2017) Kesan Penggelekan Dan Rawatan Haba Pada Keluli Tahan Karat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Muhamad Farid (2017) Effect Of Layer Thickness And Raster Angle On Tensile Properties Of Carbon Fiber Reinforced ABS Printed Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Muhammad Fitri (2017) Vibration Isolation Of A Rotating Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ridzuan, Ibrahim (2017) Thermal Comfort And Dust Concentration Level Analysis Of Air-Conditioned Lecture Rooms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Fauzei (2017) Topological Optimization In 3D Printing Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Nurul Najwa (2017) Investigation Of Heat Flow Characteristic In An Industril Oven Using ANSYS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Amarul Afiq Adli (2017) Analysis Of Engine Power Using 3 Types Of Pre-Combustion Chamber's Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Azri Dinnie (2017) Experimental Study On The Effect Of Slat To Aerodynamics Performance Of An Airfoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Nornarieyza (2017) Layer Adhesion Investigation Of 3D Printer Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Nursolehah (2017) Optimization Of Biodiesel Fuel Using Edible Vegetable Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rusdi, Muhammad Syamil (2017) Design And Analysis Of Industrial Security Door. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruslan, Nurul Farzlina (2017) Material Selection Of Natural Fiber Metal Laminate For Automotive Body Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

Safii, Zuhair Afandi (2017) Electrospun Nanofiber Water Filtration Media For Removing Suspended Solid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safrizal, Said Hanafi (2017) Influence Of Gear Shifting Pattern On Vehicle Performance. Project Report. UTeM, Melaka. (Submitted)

Saidin, Nur Hidayah (2017) Application Of Palm Oil Fiber-PP Composite For Fabrication On Interior Part Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saidon, Amirul Arief (2017) Electronic Throttle Body Tuning Using Model Reference Adaptive Control PID. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sakthiya Moorthy, Rutrish (2017) Study On Heat Exchanger For Steam Generator From Waste Heat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sani, Mohamad Safei (2017) Wear Behaviour Of 3D Printed Part Of Carbon Fibre Reinforced ABS Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sawari, Nur Adilah (2017) Optimizing The 3D Milling Machine Parameter To Improve The Cutting Accuracy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sayoti, Yuszaili (2017) Design Of Transport Trailer For Fire Fighting Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sazali, Muhammad Hilmi (2017) Effect Of Rear Spoiler Inclination Angle On The Aerodynamic Performance Of Hatchback Model By Wind Tunnel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Shafie, Azhar (2017) Implementation Of Automation Process In Generating CAD Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaharani, Muhammad Syamil (2017) Nanofibre Incoprated Face Mask For Haze Protection Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahron, Alif Hamizan (2017) Design And Fabrication Of Electrospinning Machine Cabinet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsul Nizam, Nur Amira (2017) Surface Fracture Mode Analysis Of FRP Composite Pipe By Microscopic Technique. Project Report. UTeM, Melaka. (Submitted)

Suboh, Sazmi (2017) Conceptual Design For Drying Fabrics Using Waste Heat From Air Conditioning Condenser. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Sumed, Mohd Azrie (2017) Design A Wind Ventilator Turbine For Domestic Application Using ANSYS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Syamsudin, Abdul Hakim (2017) Balancing Equipment For High RPM Pulley. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Tan, Kah Yin (2017) Investigation On The Effects Of Human Weight On Intervertebral Disc At Human Lumbar Spine Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tang, Wilfred Kah Jung (2017) CFD Simulation Of Shell And Tube Type Heat Exchanger : Effect Of Flow Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Shaw Ting (2017) A Study On Effect Of Process Parameters In Sheet Metal Forming Simulation Of AA5052. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Kah Chun (2017) The Solid Wood Filled Tube Under Axial Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tham, Wai Teng (2017) Design A Low Cost Bread Toaster Using DFMA Method. Project Report. UTeM, Melaka,Malaysia. (Submitted)

U

Unakrishnan, Vinesh (2017) An Experimental Investigation Of Multi-Ring Under Quasi-Static And Dynamic Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wahab, Muhammad Saffuan (2017) Tie Rod Analysis On Rack And Pinion Steering System For Small Class Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Awang, Wan Azniza (2017) Effect Of Pressure On Composite And Aluminum Bonding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Kassim, Syed Hafiz Ifwat (2017) Impact Test Simulation With Different Velocity Using FEA For Bumper Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Woi, Kah Wei (2017) Investigation On Tensile And Hardness Properties Of Novel Hybrid Oil Palm Empty Fruit Bunch/ Kenaf Reinforced High Density Polyethylene Composite For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Chien Hing (2017) Characterization Of Biomechanical Properties Of Articular Cartilage Using Magnetic Resonance Imaging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Michelle Khai Shing (2017) Structural Design And Mechanism Analysis Of Oil Palm Harvester. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zahar, Muhammad Hafizuddin (2017) Determination Of Dynamic Properties Of Laminated Rubber-Metal Spring Circular Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaharuddin, Muhammad Zulhafizi (2017) Design And Analysis Of The Suspension System For Single Seated Educational Racing Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaidi, Muhamad Azim (2017) Penganggaran Dalam Analisis Keupayaan Tenaga Kuasa Hidro Menggunakan Kaedah Monte Carlo. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainol, Sabri Adlan (2017) Design And Analysis Of A Lightweight Chassis For Human Powered Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainudin, Luqman Hakim (2017) Combustion In Micro Combustors With Reduced Chemical Kinetic Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Muhammad Nabel (2017) Impact Test Simulation With Different Impact Direction Using FEA For Bumper Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Muhammad Thazaly (2017) Investigation On The Performance Gasoline Blended With Hydrogen Peroxide As Fuel For Petrol Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkafli, Norizzati (2017) Measurement Of Residual Stress In Cold Work Austenitic Stainless Steel 316L With Deflection Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkefli, Muhammad Dzulzhafrain Ilman (2017) The Effect Of Flap To Aerodynamics Performance Of Airfoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)