Items where Division is "Library > Final Year Project > FKM" and Year is 2012

A

Abdul Halim, Abdul Jamal (2012) Rekabentuk Dan Fabrikasi Struktur Dadan Mobiliti Pengangkutan Peribadi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Mu'in, Haz'zaid (2012) Modelling And Study Of Femur Bone Under Normal loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Abdul Jalil (2012) Merekabentuk Dan Menganalisis Kipas Penghembus Kenderaan Penumpang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Radzie (2012) Mengkaji Daya Seretan (Drag Force) Terhadap Rak Bumbung (Roof Box) Kereta Bersaiz Kompak Dengan Menggunakan Kaedah Eksperimen (Terowong Angin). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi Alif, Azim Ng (2012) Design, Development, And Fabrication Of Urinal Health Checking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syahir, Sulaiman (2012) Analisis Daya Seret (Drag Force) Terhadap Rak Bumbung Kereta Kompak Dengan Menggunakan Kaedah Simulasi Dinamik CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syauqi, Ahmad Shukri (2012) Natural Convective Heat Transfer In Square Enclosures Heated From Below. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syazni, Ahmad Akmar (2012) Effect Of Heat Treatment On Impact Strength Of Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aiman Arrif, Ahamad Tarmizi (2012) Design And Fabricate A Brake System And Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Ilman, Abdullah (2012) Study Of Optimizing HX1 Car Air Conditioning Heat Exchanger By Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiruddin, Omar (2012) A Study Of Maintenance Design System For Industrial Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Mohd Fairus Firdaus (2012) Flow Modelling Of Nasal Cavity With Various Flow Rate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Baba Noor, Nuratiqah (2012) Natural Convective Heat Transfer In Square Enclosure With Partition On Top Wall. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Che Mat, Rosli (2012) The Study Of Energy Saving On ACMV (Air-Conditioning And Mechanical Ventilation) System For FKM Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

D. Ravisankar, Devarajee (2012) System Identification Of Electronic Wedge Brake (EWB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dg Hafizah, Kassim (2012) Investigation On The Performance Of A Hybrid Microperforated Panel-Natural Waste Fibre As An Eco-Friendly Sound And Noise Barrier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

Eric, Jau Jeffrey (2012) Performance Of A Condenser With Cooper Oxide (II) Nanoparticles Suspended Into Host Refrigerant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fadzil, Muhammad Faris (2012) Development Of A Mini Race Boat Powered By Solar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhan, Ahmad Fuad (2012) The Implementation Of Design For Reliability In Product Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Masron (2012) The Mechanical Properties Of Polypropylene/Polylactic Acid (PP-PLA) Polymer Blends. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

Goh, Jzun Hwee (2012) Modelling Of Non-Reverberant Acoustic Space Using Statistical Energy Analysis (Sea). Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Ho, Bee Kim (2012) Effect Of Filter Unit Back Pressure To The Water Hydraulic System Pump Performance - 24 Pages. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husnul Hafiz, Ismail (2012) Merekabentuk Alatan Bagi Penyediaan Makanan Kucing Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussain, Noor Wahidayu (2012) Pembuatan Dan Karakterisasi Kitosan Dari Sisa Kulit Udang Dan Cengkerang Ketam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Ikhwan Hakim, Mat Idera (2012) Pembuka Nat Roda Kenderaan Daya Kilas Rendah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Indera Kasuma, Mohamad Yunus (2012) The Study Of Metal-Filler On Graphite Polymer Composite. Project Report. UTeM, Melaka. (Submitted)

Indera Kasuma, Mohamad Yunus (2012) The Study Of Metal-Filler On Graphite Polymer Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Isbollah, Harun (2012) Rekabentuk Dan Analisa Kerusi Roda Untuk Orang Yang Mengalami Masalah Separa Lumpuh Pada Bahagian Kaki. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzad Amir, Abdul Karim (2012) The Effect Of Coconut Waste On Concrete Structure Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Joehan, Ariff Ismail (2012) Design And Fabricate An Ergonomics Cockpit For Single Seater Formula Varsity Electric Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jusoh, Noor Muhammad Jamalluddin (2012) The Effect Of Aging Heat Treatment On Hardness And Mechanical Properties Of Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kejanindran, Govindarajoo (2012) Comparison On The Microstructure And Hardness Of GTA Welding And GMA Welding Of Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kelvin, Theng Sern Lung (2012) A Study On 5 % And 10 % Bio-Blended Diesel Fuel Spray Deposition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Larry Long, Yong Siang (2012) Effect Of Welding Current On Mechanical Properties Of Galvanized Chromided Steel Sheet In Resistance Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Linus Michael, Stephen Mirando (2012) Comparison On The Microstructure And Hardness Of SMA Welding And GMA Welding Of Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loi, Wei Cheong (2012) Regenerative Braking Systems (RBS): Energy Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Luqman Hakim, Mohd Azam (2012) Development Of Folded Wheel For Disabled Wheelchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Maskana, Mamat (2012) Sistem Kawalan Adaptive PID Untuk Kenderaan Autonomi Berdasarkan Anggaran Gred Jalan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mhd Faiz, Mhd Fazil (2012) Merekabentuk Alat Pengira Solat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fahrurrofiq, Imam Fauzi (2012) Modelling And Validating Of Vehicle Longitudinal Dynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nashrik, Suhaimy (2012) Development Of Automotive ECU And Ignition Wiring System Training Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Faiz, Yahani (2012) Microstructure Analysis On Heat Treated Carbon Steel Material Subjected To External Flame Heating Process (Due To Warpage Control). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fajar, Sariman (2012) Merekabentuk Dan Fabrikasi Casis Kerangka Ruang Kereta Lumba Elektrik Formula Varsity UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Rafi, Omar (2012) Merekeabentuk Dan Membangunkan Galah Komposit Ultra Ringan Untuk Tujuan Penuaiaan Buah Kelapa Sawit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syafiq, Ramli (2012) Merekabentuk Dan Menganalisis Rod Penghubung. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adiran Aswad, Ismail (2012) Study And Design Of Robot Gripper Using SMA Actuator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Audi Aizat, Mohd Zim (2012) An Investigation Of Defects On Butt Joint Of Different Welding Technique Using Ultrasonic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Ahmad (2012) Diagnosis Of Centrifugal Pump Failures Using Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan, Mohd Akhir (2012) Investigation Of Parameter That Affecting Air Flow Around Vehicle Frontal Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faisal, Harun (2012) A Study Of Fin In Arrays As A Heat Sink Of Motorcycle Thermoelectric Power Generator (MTEG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal, Ghazali (2012) Application Palm Kernel Shell Charcoal In Steel Carburizing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fariz Naim, Abdul Talib (2012) Basikal Elektrik Boleh Lipat Menggunakan Hab Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farris , Mohd Daud (2012) Reka Bentuk Dan Pembangunan Galah Teleskopik Pneumatic Bagi Penuaian Buah Kelapa Sawit Dengan Pemampat Udara Mudah Alih Dan Tiga Segmen Paip Aluminium Berlubang (Gred Marin). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Ab Aziz (2012) Diagnosing Rolling Element Bearing Failure Using Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizzol, Karim (2012) Designing And Fabrication Modular Products With The Incorporation Of DIY Assembly Method (Study Table). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmi, Md Salleh (2012) Analysis On CAD Data Obtained From Non-Contact Reverse Engineering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mustaqim, Othman (2012) Merekabentuk Dan Menganalisis Pancarongga Ekzos Seramik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nashrol, Mohd Nawi (2012) Design And Ergonomics Analysis Of UTeM Bus Cockpit Arrangement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nawari, Mat Sudin (2012) Merekabentuk Dan Menganalisis Casis Kenderaan Hijau Untuk UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazrul, Othman (2012) Rekabentuk Dan Fabrikasi Sistem Stering Kereta Lumba Elektrik Formula Varsiti. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahzudin, Saleh (2012) Design And Analysis Of Step Clamp Using Sand Casting And Rapid Prototyping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yamin, Ahmad Hafizal (2012) Car Accident Warning Flare. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zafifi, Mustafa (2012) Study And Design Solar Tracker System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zakwan, Mohd Razi (2012) Rekabentuk Dan Fabrikasi Pembuka Nat Tayar Kereta Pelbagai. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zuhair, Zulkarnain (2012) Thermal Analysis Of Lighweight Clutch Disc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Moo, Yi Shan (2012) A Study On Independent Wheel Railway Bogie. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Farhan, Fadzilah Husani (2012) Design And Fabricate For Knuckle Racing Electric Car With High Performance And Realibility. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afandi, Darwis (2012) Design And Development Of Pneumatic Mini Disc Oil Palm Fruit Stalk Cutter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aimi, Ikmal Samad (2012) The Study Of Data Acquisition System at FKM, UTeM Engine Dynamometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Amin, Dzulkifli (2012) Engine Performance And Emission Level Investigation Of Vehicle Running With Different Types Of RON Fuel Grades And Fuel Brands. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Arham, Solahuddin (2012) Menganalisis Dan Mereka Bentuk Satu Peralatan Penjernihan Untuk Memisahkan Pepejal Terampai Di Dalam Sungai Yang Mana Sistem Penjernihan Ini Boleh Mencuci Kendiri Penapisnya. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asif, Md Yusof (2012) Warpage Control Due To Heat Treatment Process On Conventional Furnace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asyraf, Zulkefli (2012) Kenderaan Hijau PDRM : Ride And Handling Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus, Mohd Razali (2012) Kajian Parameter Terbaik Untuk Robot Kimpalan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haffizzuddin, Ammin Sabda (2012) Merekabentuk Dan Fabrikasi Pengutip Bola Golf Konsep Hijau. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haffizzuddin Ammin, Sabda (2012) Merekabentuk Dan Fabrikasi Pengutip Bola Golf Konsep Hijau. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafizuddin, Che Harun (2012) Mereka Bentuk Galah Pemetik Dan Pemotong Buah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hanif, Mohd Zanani (2012) Design And Development Of Recreational Human Powered Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ikhtiaruddin, Afandi (2012) Merekabentuk Dan Membangunkan Struktur Kerangka Skuter Imbangan Elektrik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izzat, Abd Halim (2012) Heat Transfer Characteritic Of An Evaporator With CuO Refrigerant Based Nanofluids As Working Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izzat, Abd. Halim (2012) Heat Transfer Characteristic Of An Evaporator With Cuo Refrigerant Based Nanofluids As Working fluids. Project Report. UTeM, Melaka. (Submitted)

Muhammad Ridhwan, Mohd Talib (2012) Studies On Dynamic Behaviour Of The Automotive Door Locking System During Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syamil, Zaini (2012) Automatic Throttle Body Control Using Pid Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Taufik, Abdul Aziz (2012) Electronics Stability Program (ESP) Of The Automotive Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zhariff Izwan, Mohd Suhaimi (2012) Kajian Pengesanan Dilaminasi Pada Struktur Bahan Komposit Menggunakan Kaedah Masa, Frekuensi Dan Masa Frekuensi-. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa, Zamir (2012) Development Of Submerge Pump Experimental Rig To Measure Pump Performance For Educational Experimentation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Nazran, Ahmad Sufian (2012) Merekabentuk Dan Menganalisis Jisim Optimum Pada Kawalan Lengan Atas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ngiow, Shin Nian (2012) Influence Of Consumable And Current Towards Mechanical Properties On Arc Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nicholas Lian, Ak Mujah (2012) Heat Transfer Charactericstic Of A Condenser With AI203 Refrigerant Based Nanofluids As Working Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Muhammad Faiz, Mustaffar Bakri (2012) Kajian ke Atas Kecekapan Menara Penyejukan Dengan Percampuran Bahan Kimia Etilena Glikol Ke Dalam Cecair Ejen Penyejukan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Zubaidi, Nik Mahmood (2012) Designing And Fabrication Modular Products With The Incorporation Of Diy Assembly Method (Shoe Rack). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Fakhrezah, Matdiris (2012) Experimental Study Of Femur Bone Under Normal Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Hasriq, Mohammad (2012) Konsistensi Penjana Titisan Dalam Menghasilkan Saiz Dan Selang Masa Titisan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norana, Hassim (2012) Multiplier Wheel Nut Wrench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhidayah , Hashim (2012) Design and analysis of deep drawing die for brass socket by using finite element analysis. Project Report. UTeM, Melaka. (Submitted)

Nur 'Ain, Azmi (2012) Design And Fabricationn Madular Product With The Incorprotion Of Diy Assembly Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Atiqah, Shahari (2012) Simulation Of Air Flow Around A Vehicle Side Mirror. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurain Shyafina, Ab Latif (2012) Kajian Penjanaan Semula Tenaga Melalui Sistem Suspensi Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Ooi, Yang Hooi (2012) Study Of Flow Pattern And Pressure Distribution In Journal Bearing For Different Groove Type Using CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Ravindran Nair, Ajay Nair (2012) The Investigation Of The Influence Of Filler Welding Materials On The Microstructure And Hardness Of GTA Welding In Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ridzuan, Jaham (2012) Merekabentuk Dan Fabrikasi Radas Eksperimen Statik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rusdi, Yunus (2012) Modeling And Study Of Vertebra Under Compressive Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

Sawita, Amir (2012) Effect On Mechanical And Physical Properties Of Cotton Fiber In Hybrid Laminated Composite For hard Panel Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aminah, Samsuddin (2012) Optimization Of Vehicle Steering Wheel In Active Steering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Song, Jean Yau (2012) Design And Analysis Stented Aneurysms For Human Body. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Mohd Afiq, Syed Hassan (2012) Investigate On Mild Steel Spot Welding Strength Effect By Using Design Of Experiment(DOE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syukur, Abdul Kadir (2012) Design And Analysis A New System For Duct Testing With The Smart Installation Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Tan, Kien Guan (2012) A Thermal Heated Lunch Box. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Chin Wee (2012) Experimental and analytical investigation torsional behavior of sigma profile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wan Ahmad Fitri, Johari (2012) A Study On The Failure Analysis Of The Tig Welding With Dissimilar Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Azahar, Wan Azriana (2012) Design And Analysis Of Dumbwaiter Lift For Public Building Use. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Ellena Nadia, Wan Kamal (2012) Modeling, Simulation And Control Of Antilock Braking System Using Multibody Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yusof, Muhamad Sabri (2012) Pembangunan Suis Lampu Pengesan Pergerakan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zaweer Akram, Zainal Abiden (2012) Dynamic Analysis Of A Lightweight Clutch Disc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhaniff, Azari (2012) Heat Recovery System In Vehicle Temperature And Power Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhelmi, Saad (2012) A Study The Mathematical Modeling Of Corrosion In Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)