Items where Division is "Library > Final Year Project > FKM" and Year is 2010

A

Abdul Azim, Roslan (2010) An Application Of 3D Modelling And Simulation Analysis In The Development Of Consumer Product Design (Folding Bicyle). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Abd Hamid (2010) Air Conditioning System Powered By Small Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakam, Mohd Ridza (2010) Effect Of Particle Size And Fuel Type On Solid Waste Combustion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Hassan (2010) Simulation Study On Active Ambulance Stretcher. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad , Yaakob (2010) Evaluation Study On Static Analysis Of Automotive Brake System Using Numerical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz, Hamzah (2010) Analysis Of Lubricant Performance For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Mohammad Mohsin (2010) Design Of Automotive Chassis Electrical System Training Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Naim, Ismail (2010) Identification And Reduction of Noise And Vibration level On Rear Handle Of Handheld Tools Using Fast Fourier Transform (FFT) Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Noh , Salleh (2010) Design Analysis And Simulation Of A Railing System Security Cage At Taman Buaya. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sabri, Mohamed (2010) Pemindahan Haba Di Dalam Rumah Dengan Menggunakan Rockwool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Za'im, Zulkefli (2010) Design And Fabrication Of Heat Exchanger - Radiato. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishah , Mazelan (2010) Effect Of Re-solution Heat Treatment Temperature On The Impact Toughness Of An Aluminum Alloy For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alyaa Izzati, Hashim (2010) Study And Preliminary Design Of High Speed Impact Test Machine Using Hopkinson Bar Test Principle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arif, Ahmad (2010) Numerical Prediction Of Solid Waste Combustion In An Updraft Gasifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arina , Zakaria (2010) Study On Shock-Absorbing Properties Of Square Tube Strengthening Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awangku Mohd Hazmin , Awang Zainal (2010) Study Of The Effect Of Variable Speed Fan On The Radiator Cooling System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azfar Nazmi , Nikmatlah (2010) Validation Of Bar Vibration By Using FEA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azinuddin Akmal, Abdul Aziz (2010) Design And Development Of An Automated Sorting System In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmin , Ahmad (2010) The Effect Of Thermoelectric Power Generator (TEG) Based Hi-Z Thermoelectric Modules On The Performance Of 1.3L 4G13 Wira Engine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azmir, Mat Zain (2010) Design Of MR Fluid Base Brake System For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmir, Abu Samah (2010) Optimization Of Louvered Plate Angle Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul Affendi, Atan (2010) Design Optimization Of A Boiler Furnace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Bok , Chiew Loon (2010) Emission Characteristic Of Alkaline-Catalysts Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Chan, Hong Ket (2010) Study Of Internal Heat Exchanger Effects On Car Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mohd Elyas, Che Omar (2010) Investigation Of Shaft Speed Cause By Turbo System In Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Wai Pick (2010) Study Of Aircraft Propeller - Structural Strength. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

Dila Afnida, Azman (2010) Feasible Study On Characterization And Comparison Of Accelerated Life Tests And The Compatible Software For Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulhisham, Aminuddin (2010) Reliability Study On Automotive Component Using Design Failure Mode And Effect Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Faihsal Hidayah , Suduri (2010) Rekabentuk Penyidai Pakaian Automatik Dan Boleh Laras Untuk Kegunaan Domestik (Retractable Automatic Cloth Hanger For Domestic Use). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fazly, Buang (2010) Modeling And Simulation Of Horizontal Wind Turbine Blade. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Febrian, Idral (2010) Conceptual Of A Single Seater Formula Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hamdi Alif, Ahmad Radzi (2010) The Design And Development Of Inflator System Of Life Jacket For Emergency Situation In The Water. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hilmi Safuan, Japar (2010) Aerodynamic Study Of Heavy Truck Using CFD Fluent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Izzat Safuan, Arif (2010) Effect Of Variation Of Construction Materials On Thermal Comfort Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Ja'alam, Mohd Azhar (2010) Kajian Sistem Tadahan Hujan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamadeel Izwan , Ibrahim (2010) An Application Of 3D Modeling And Simulation Analysis In The Development Of Consumer Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Abdullah (2010) Skuter Elektrik Boleh Lipat Menggunakan Hab Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Mohamad Faizal (2010) Investigation On Feasible Materials And Methods For Inducing Natural Dehumidification In Tropical Living Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Joseph, Tiong King Ing (2010) Experimental Investigation Of Bamboo-Filled Aluminium Tube Subjected To Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kamal , Muhammad Raini (2010) Study On Waste Wood As An Alternative Conservation Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Aidil, Nordin (2010) Design And Analysis Of Optical Mouse Using Boothroyd Dewhurst DFMA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Ihsan , Md Shaari (2010) Scaled Model Of A Ware Energy Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kumaresan, Magaswaran (2010) A Study Of Windshield Automotive Wiper Noise And Vibration Using Finite Element (FE) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lau, Kok Wei (2010) Computer Simulation On Circular Ring Subject To Lateral Compression, Quasi-Static Lateral. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Ming Kerk (2010) Designing And Fabricating The Guard Rail System For The Scaffold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Logeswaran, Kanasin (2010) Design Optimization Of Third Brake Light And Signal System On Motorcycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Soo Har (2010) R66 Bus Superstructure Concept Design Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Md Fua’ad, Jamian (2010) Merekabentuk Dan Menghasilkan Blok Uji Ujian Tanpa Musnah (NDT) Untuk Aplikasi Ujian Ultrasonik (UT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Amta Ezra, Ahmad (2010) The Feasibility Study And Design Improvement Of Fire Fighting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mior ShahrIl, Sulaiman (2010) Membangunkan Dandang Tiub Air Menggunakan Bahan Bakar Pepejal Buangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Moamad Izzudin, Abdul Hamit (2010) Mechanical And Microstructure Characterization Of Oil Treated Aluminium Alloy 7075. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mohamad Firdaus, Abdul Ghaffar (2010) Design And Development Of Carbon Fiber Suspension Push Rod For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hafiz, Mohamad (2010) Determination Of Aerodynamic Drag Force Acting On Moving Heavy Duty Truck-Trailer In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Azim Shukri, Mohd Kamal (2010) Feasibility Study And Design Development On Automatic Feeder's Mechanism For Goat Breeding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafiz, Abdellah (2010) Selection Of Difference Equation Minimum Model Specification By Correlation Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nizam, Shamsuddin (2010) Development Of Manual Transmission Powertrain Dynamic Model For Drive Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat, Mohd Noor (2010) Device For Heat Removal For Parked Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizuddin, Yusof (2010) Application Of Gyroscope Technology In Human Mobile Transporter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Al Fainan , Mustapha (2010) Thermal Analysis On Thermoelectric Cooling Module. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Ariff , Arshad (2010) Comparison Between Combination Silencer And Single Type Silencer For Two-Stroke Noise Reduction And Its Effect On Engine Power Curve. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan , Mohamed (2010) Design Of Rigid Board Material From Banana Tree Trunk Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Abd Majid (2010) Development Of A Mini Turbine To Generate Electricity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fais, Ismail (2010) Tuning Single Cylinder Two - Stroke Engine Or Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz, Mat Zaid (2010) Aerodynamic Study Of Formula 1 In School For Mozac Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fareez , Ahmad (2010) The Design And Optimization Of Structure Body Of Three Wheeled Mobility Device For People With Lower Limb Disability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fariq, Mohamad (2010) W-Shape Beam Subject To Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzy, Khamis (2010) Study A Pneumatic Telescopic Cylinder Arm Operation For Variable Load Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Mohd Nordin (2010) Development Of Simple Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Jaafar (2010) Automotive Air Conditioner Booster. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Abu Bakar (2010) Design And Development Of Ventilated Single Disc Brake Rotor For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairi Fifi, Mansor (2010) Damaged Identification Of Mechanical System via Changes In Their Vibration Characteristics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hidayad , Zulkifli (2010) The Performance Of Thermoelectric Power Generator (TEG) Based Hi-Z Thermoelectric Modules. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Izamudin, Itam Ahmed (2010) Design And Development Of Carbon Fiber Double Wishbone Suspension Arm For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izzati Izdihar , Ibrahim (2010) Design And Development Of Automotive Smart Tail Light System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairir, Ismail (2010) Ergonomics Design And Analysis Of Bus Driver Seat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairol, Mohd Daud (2010) A Study On Insulation Material Of Energy Saving Purposes In Rooftop Design. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mohd Khairul Azwan, Mamat (2010) Simulation Study Of Pitching And Rolling Control For Passanger Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Muhyiddin, Mustafa (2010) Aerodynamic Perform of Aircraft Propeller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Muzzammil, Roslee (2010) Design And Analysis On Structural Of Shrimp Paste Cutting Machine For Small Medium Industries (SME) In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib, Idris (2010) Mechanism Design Of Magnetorheological Based Antilock Braking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib, Mohammad Mahbor (2010) Analysis And Modelling Of Projectile Motion With Air Resistance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasrul Azli, Mohd Aris (2010) Design Analysis Of Bearing For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rauf, Jamaludin (2010) Design Of Control System For Automatic Steering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzuan , Abdul Rahman (2010) Kajian Hubungan Antara Perlaksanaan Keselamatan Dan Kesihatan Pekerjaan Dan Kadar Kemalangan Dalam Bidang Industri Terpilih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Roszaimie, Mohd Ramli (2010) Design Of Ridden Hexapod Robot For Amusement Park. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shaarani, Mohd Hashim (2010) Design And Development Of Lightweight Chassis For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq , Ahmad Roseli (2010) Design Improvement Using Design For Manufacture & Assembly (DFMA) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahir Asyraf, Mohammed Tahir (2010) Environmental Effect On Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zawavi, Zulkafli (2010) Development Of Recoiling And Reshapable Car Bumper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zharif, Zakaria (2010) Mechanism Design Of Mr Brake For Formula Varsity Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Syafiq , Md. Taib (2010) Merekabentuk Dan Menganalisa Mekanisma Pergerakan Tangan Mekanikal Menggunakan Lego Mindstorms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Hafizuddin, Mohd Ridowan (2010) The Design Of A Pre-Assembly Of Blood Collection Tube Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Shah Rul, Kamaruddin (2010) Kesan Pengurangan Bunyi Oleh Penyenyap Jenis Reaktif (Diffusing Silencer) Daripada Perubahan Bentuk, Isipadu Dan Offset Paip Masukan Dan Keluaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Suffian Effendi, Md Yusuf (2010) Simulation Study On Active Seat Suspension For A Passenger Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aizuddin, Abd Aziz (2010) The Design Of Mechanism Mechanical Ventilation System Using Solar System For Car Below The Sunlight. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Azuan, Fauzan Punijan (2010) Analisis Minyak Pelincir Baru Untuk Kereta Dengan Menggunakan Four-Ball Tester. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz, Jansar (2010) Design And Development Braking System For Patrol Mobility Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz, Abdul Salim (2010) Simulation Evaluation Of Magnetorheological Brake Based On Anti-Lock Braking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafizi, Zainal Abidin (2010) To Design and fabricate projectile motion prototype device for students Use In Dynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haziq, Abidin (2010) Effect Of Air Velocity And Moisture Content On Solid Waste Combustion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Muslim , Mustaffa (2010) The Holder Of Thermoelectric Power Generator (TEG) Based Hi-Z Thermoelectric Modules. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Syukri, Abdul Latib (2010) Mechanism Design Of Active Geometry Control Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syukri, Ismail (2010) Design Optimization For The Active Bumper System Test Rig. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yusri Fadzli , Yusoff (2010) Mekanisme Pencuci Untuk Mencuci Kotoran Pada Batang Tebu Untuk Peniaga Air Tebu Kecilan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Nurafiz, Hussein (2010) Gas Powered Model Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Syafiq, Mohd Yusof (2010) Performance Test Of Electric And Electro-Hydraulic Parking Brake. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musyriff, Mustafa (2010) Foldable Electric Bicycle Using Hub Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Nasrul Hakim , Khalid (2010) Air Flow Distribution Of A Fan Using CFD Method. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nazarail, Ab Majid (2010) Tensile Fracture Behavior On Temepred AISI 1040 Medium Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Yin Teng (2010) Design Analysis And Modification Of Fire Fighting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Affandy, Abas (2010) Experimental Validation Of Aftermarket Fuel Saving Device (Voltage Stabilizer). Project Report. UTeM, Melaka, Malaysia. (In Press)

Noor Asmah, Arshad (2010) Design And Fabricate An Optimize Mechanism For Fruit Plucker To Be Commercialized. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazmir , Amat Basri (2010) Clamper Powered By Pneumatic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhafizah, Mohamad Dasuki (2010) Design And Optimization Of The Toilet Wheelchair As Assissting Aid For Elderly And Disable Persons For Daily Usage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Akhmar, Parlam (2010) Study Of Belt Stretch In Relation To Rotational Speed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fasiha, Nazirmuidin (2010) Study Of Heat Exchanger Effect In A Car Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fathiah, Mohd Nor (2010) Development Of Low Pressure Water Hydraulic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izrin, Mahyon (2010) Aerodynamic Study Of Proton Exora Using Computational Fluid Dynamic (CFD) Fluent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurliyana , Mohd Nadzri (2010) Fluid And Heat Flow Performance In Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Asikin, Mohamad (2010) Thermal Cooling Of Computer Hardware. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Nurain, Dzulkifli (2010) Develop And Propose An Optimum Maintenance Schedule For A Critical Machine At Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Omar, Abdullah (2010) Design Optimization On Power Train System For Fire Fighting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Rafeqah, Abd Ghani (2010) The Study Of Heat Radiation In Flare Systems Application In The Oil, Gas And Petrochemical Industry. Project Report. UTeM, Melaka Malaysia. (Submitted)

Raven, Lachimanan (2010) The Evaluation Study Of Noise And Vibration In Flexible Wiper System Using Analytical Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Nor Effyza (2010) Design And Develop TES Split Unit Of Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

Saiful Azhar, Che Pa (2010) Design And Development Of The Tricycle For Agriculture Sector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samuel, Tang Kah Hung (2010) Literature Study On Impact Energy Absorption (IEA) Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarah Fatihah, Shahrin (2010) Pengoptimuman Sistem Nozel Sedia Ada Pada Mesin Pemadam Api Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

See, Thiong Zhou (2010) Design And Improvement Of Hydraulic System For Fire Fighting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrul Izzat , Hamid (2010) Experimental Validation Of Aftermarket Fuel Saving Device (Air Boom). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaifatul Shima, Shaari (2010) Analysis On Bicycle Crank Arm Using Tensile Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aminah, Mohd Subari (2010) Study On Shock Absorbing Properties Of Aluminium Circular Tube. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhaila, Mat Said (2010) Modeling Study Of A Gas Turbine Burner Cooling Ring Efficiency In A Model Combuster Exit Duct. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Eddy Afifi, Syed Abdullah (2010) Comparative Study Of Ideal Engine Test Cell System At Proton As Compared To FKM, UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Tay , Yon Yon (2010) Simulation Of Biodiesel Production From Used Frying Oil (UFO) Using Alkaline - Based Catalysts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teh , Khang Ling (2010) Design And Testing Of Mechanical Juice Extraction Especially For Sugar Cane. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teoh , Chun Keat (2010) Design And Testing Of Lifting Or Harvesting Mechanism For Nata De Coco Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Too , Phooi Wah (2010) Development Of Concept Design For An Ideal Intercity Bus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wong, Jiar Mean (2010) Development Of Concept Design For An Ideal City Bus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yap, Pei Yung (2010) Biodiesel Production From Used Frying Oil (UFO) Using Alkaline-Based Catalysts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yew, Wai Keai (2010) Diesel Engine Performances Of Alkaline-Catalyst UFO Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Poh Yee (2010) The Study Of Palm Oil Fiber For Filtration Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zaharudin, Mohd Helmi (2010) The Design And Development Of Water Heater System Using Solar Thermal Radiation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zairul Fazura , Mohd Zaidi (2010) Rekabentuk Dan Membina Sistem Penyaman Udara Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulfadli, Kasmani (2010) Simulation Of Automatic Steering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)