Items where Division is "Library > Final Year Project > FKM" and Year is 2013

Raudhah , Zainal Rashid (2013) Thermal insulation particle board made with sugarcane bagasse fiber, kenaf core powder reinforced with polypropylene. Project Report. UTeM, Melaka. (Submitted)

Yuvarajan , Karathihayan (2013) Modelling of palm fibre polypropylene composite for randomly distributed fibre reinforcement. Project Report. UTeM, Melaka. (Submitted)

A

Abdul Basit , Kamaludin (2013) Pembentukan mendapan bahan bakar diesel dan bio-diesel pada suhu permukaan melebihi suhu Kadar Pengewapan Maksimum (MEP). Project Report. UTeM, Melaka. (Submitted)

Abdul Hafiz , Hashim (2013) To determine alkaline catalyst for the jatropha oil biodiesel production. Project Report. UTeM, Melaka. (Submitted)

Abdul Jabbar , Zamri (2013) Smart day and night lighting system using solar light ray reflection and deflection. Project Report. UTeM, Melaka. (Submitted)

Abdul Muhaimin , Mohd Shafie (2013) Wasted Heat Recovery System : How To Gain Energy. Project Report. UTeM, Melaka. (Submitted)

Abdull Hanif , Abdull Rahman (2013) Microstructural Study On Different Type Of Biodiesel Fuel For Automotive. Project Report. UTeM, Melaka. (Submitted)

Abu Daud , Halip (2013) An investigation on the influence of double heat treatment process on round stainless steel bar. Project Report. UTeM. (Submitted)

Adli Zil Ikram , Abdullah (2013) Analysis the i beam subjected to three point loading or bending for different material. Project Report. UTeM, Melaka. (Submitted)

Ahmad Anwar , Mohamed Sabri (2013) Sistem Kawalan Brek Anti Kekunci (ABS). Project Report. UTeM, Melaka. (Submitted)

Ahmad Lutfi , Dahari (2013) Menilai prestasi enjin diesel menggunakan campuran minyak sayuran dengan diesel sebagai bahan api. Project Report. UTeM, Melaka. (Submitted)

Aliff Fahmi , Radzi (2013) Green technology of synthetic rubber for the future tire. Project Report. UTeM. (Submitted)

Amirullah , Amran (2013) Bahan api pepejal daripada sisa bahan buangan industri minyak kelapa sawit. Project Report. UTeM, Melaka. (Submitted)

Amjad Saddar , Md. Isa (2013) Pembangunan Sistem Kuasa Penggerak Hibrid Elektrik Untuk Kenderaan Dua Alam UTeM. Project Report. UTeM, Melaka. (Submitted)

Ardika Ridal, Awang (2013) The investigation of turbo generator on exhaust manifold in spark ignition engine. Project Report. UTeM, Melaka. (Submitted)

Arham Syafiq , Azmi (2013) Mechanical properties of polyperties of polypropylene filled wood fiber composites. Project Report. UTeM. (Submitted)

Ashafi'e , Mustafa (2013) Tribological properties of nanoparticles as lubricating oil additives. Project Report. UTeM, Melaka. (Submitted)

Asok Max , Subramaniam (2013) Active Suspension Control Of Ground Vehicle Heave And Pitch Motion. Project Report. UTeM, Melaka. (Submitted)

Ayu Natasya , Kasim (2013) Effects of bf length on the properties of bamboo/polypropylene composite. Project Report. UTeM. (Submitted)

Azrul Hafez , Mohamad (2013) Study Of Design And Fabricate Driving Simulator. Project Report. UTeM, Melaka. (Submitted)

C

Cheah, Yee Mun (2013) Modelling and experimental investigation on perforated plate mobility. Project Report. UTeM, Melaka. (Submitted)

F

Fahmi , Samat (2013) Design of conceptual smart trash can. Project Report. UTeM. (Submitted)

Fairuz Fazillah, Shuhimi (2013) The effects of stainless steel on the properties of graphite-polypropylene composite for bipolar plate. Project Report. UTeM. (Submitted)

Fu, Fang Xiong (2013) CFD Of Liquefied Natural Gas (LNG) behaviour during tank filling. Project Report. UTeM, Melaka. (Submitted)

H

Hafizin , Hanipah (2013) Design And Development Of A Protable Spark Plug Tester For Motocycle User. Project Report. UTeM, Melaka. (Submitted)

Hareshwara Ruban , Subramaniam (2013) Modelling For Prediction And Optimization Of Mechanical Response Of Unequal Thickness Steel Sheet Resistance Spot Welds In Tensile-Shear Loading Condition. Project Report. UTeM, Melaka. (Submitted)

Hazalifah , Zainal Abidin (2013) Tribological properties of waste vegetable oil biodiesel using-alkaline-based potassium hydroxide (KOH) catalyst. Project Report. UTeM, Melaka. (Submitted)

Heng , Seok Teik (2013) Design of a dynamic vibration absorber. Project Report. UTeM. (Submitted)

I

Ida Laila , Bakhtiar (2013) DFMA Analysis Of A Water Tank Cleaning Robot. Project Report. UTeM, Melaka. (Submitted)

Iffa Marina , Jopri (2013) Effect of heat treatment on the microstructures and mechanical properties of high carbon steel. Project Report. UTeM, Melaka. (Submitted)

Ilham Hadi , Syahril (2013) Evaluation Of Dynamic Characteristics On PRT And Thermocouple Sensors In An Automated Temperature Calibration System. Project Report. UTeM, Melaka. (Submitted)

Izzul Hazwan , Amir (2013) Strengthening of aluminium alloy 6061 by using precipitation hardening heat treatment. Project Report. UTeM. (Submitted)

J

Jamiatul Adawiah , Ab. Sidek (2013) Heat transfer characteristics of a heat exchanger. Project Report. UTeM, Melaka. (Submitted)

Janisa , Aldean (2013) Total Design Of A Portable Automation Training Kit. Project Report. UTeM, Melaka. (Submitted)

Jordan, Keith Ogak (2013) Finite element simulation of a rolling process of aluminium. Project Report. UTeM, Melaka. (Submitted)

K

Kamarul Hisyam , Muhamad (2013) Evaluation of diesel engine performance and emissions using blended biodiesel (waste chicken fat) and conventional diesel. Project Report. UTeM, Melaka. (Submitted)

Kamarulhelmy , Talib (2013) Optimization Of Mechanical Coupling In Electric Vehicle (ev). Project Report. UTeM, Melaka. (Submitted)

Khairul Amzar , Mohd Kassim (2013) Design and fabrication of thrower mechanism for tennis ball machine. Project Report. UTeM, Melaka. (Submitted)

Kismera , Mohamed Amin (2013) Radiator cleaning equipment. Project Report. UTeM, Melaka. (Submitted)

Kong, Wei Shen (2013) Design And Fabrication Of A Reduced Scale Tire Test Machine. Project Report. UTeM, Melaka. (Submitted)

Kow, Kok Lim (2013) Development Of Active Suspension For Passenger Car. Project Report. UTeM, Melaka. (Submitted)

L

Lai, Qili (2013) Development Of Four Wheel Steering For Vehicle Handling Enhancement. Project Report. UTeM, Melaka. (Submitted)

Lee, Kok Tai (2013) Modeling, Simulation And Validation Of Reduced Scale Vehicle Dynamics Model. Project Report. UTeM, Melaka. (Submitted)

Lie, , Ken Nie (2013) The rolling effect in mechanical properties of 316L stainless steel for implant materials. Project Report. UTeM, Melaka. (Submitted)

Liew, Kean Fei (2013) Design Of A Comfortable Bus Passenger Seat. Project Report. UTeM, Melaka. (Submitted)

Lim, Da Ping (2013) Simulation And Measurement For Indoor Air Flow. Project Report. UTeM, Melaka. (Submitted)

Lim , Ching Sheng (2013) Railway Vehicle Dynamics And Vibration Analysis. Project Report. UTeM, Melaka. (Submitted)

Loh, , Xiao Hui (2013) Effect of heat treatment on hardness and impact strength of stainless steel. Project Report. UTeM, Melaka. (Submitted)

M

Mark , Fidelis Kensin (2013) Voice Recognition Ignition System. Project Report. UTeM, Melaka. (Submitted)

Mazizi , Mohamed (2013) Emisi prestasi enjin diesel menggunakan campuran biodiesel sawit dengan bahan aditif sebagai bahan api. Project Report. UTeM, Melaka. (Submitted)

Mohamad Aisamudin , Shuhaimi (2013) Effect of carbon black on the properties of graphite-epoxy composite for bipolar plate. Project Report. UTeM, Melaka. (Submitted)

Mohamad Syafiq , Mokhtar (2013) The effect of heat treatment on the microstructures and mechanical properties of copper alloy. Project Report. UTeM, Melaka. (Submitted)

Mohamad Zaharudin , Sariman (2013) Position Tracking Of Slider Crank Mechanism By Using PID Controller. Project Report. UTeM, Melaka. (Submitted)

Mohamad Zuric Adham , Mat Esa (2013) Alat Penghilang Sakit Belakang. Project Report. UTeM, Melaka. (Submitted)

Mohammad Hafizuddin , Shammuin (2013) Insulation materials for home residence building wall. Project Report. UTeM, Melaka. (Submitted)

Mohammad Haiqal , Supaat (2013) Simulation of mixed convection in a channel with a cavity heated from different side using fluent. Project Report. UTeM, Melaka. (Submitted)

Mohammad Nazry , Rosley (2013) Total design of Water Tank Leaning Robot (WATCLEAR). Project Report. UTeM, Melaka. (Submitted)

Mohammad Shahin , Mansor (2013) Simulation of soot movement in diesel engine. Project Report. UTeM. (Submitted)

Mohammed Rozi , Hamid (2013) Finite element micromechanical modeling of aluminium magnesium alloy during plastic deformation. Project Report. UTeM. (Submitted)

Mohd Ameer Aiman , Ruhaizi (2013) Improving stability of water based nanocarbon using OH-CNT modifield with polyvinyl pyrrolidone as a dispersing agent. Project Report. UTeM, Melaka. (Submitted)

Mohd Arif , Zaulkefli (2013) Acustic of mosque : the effect of roof shape on it's acoustic performance. Project Report. UTeM. (Submitted)

Mohd Azarul Syazari , Che Aziz (2013) The effects of ice formation on airfoil performance. Project Report. UTeM, Melaka. (Submitted)

Mohd Bakri , Ismail (2013) Regenerate of decanter cake from palm oil mill waste effluent for the removal of heavy metal ions from industrial wastewater. Project Report. UTeM, Melaka. (Submitted)

Mohd Fahmi Adli , Salahuddin (2013) Investigation on diesel engine performance using the second generation of biodiesel and its blend /. Project Report. UTeM. (Submitted)

Mohd Fareez , Abdul Rahman (2013) Merekabentuk Dan Membangunkan Sistem Pembersihan Kendiri Bagi Peralatan Penuaian Air Hujan. Project Report. UTeM, Melaka. (Submitted)

Mohd Firdaus, Jamaludin (2013) Prediction of helical gear life using wear debris analysis. Project Report. UTeM, Melaka. (Submitted)

Mohd Hafiszudin , Ahmad (2013) Design And Fabrication Of Ball Feeder Mechanism And Body For Tennis Ball Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd Hafiz , Mohamad Kassim (2013) Bangunan penyejuk solar pasif. Project Report. UTeM, Melaka. (Submitted)

Mohd Hilman , Kamaruzaman (2013) Thermal comfort study for student laboratory. Project Report. UTeM, Melaka. (Submitted)

Mohd Idham Khalid , Abu Hasan (2013) Numerical study of fluid and heat transfer in mixing elbow. Project Report. UTeM. (Submitted)

Mohd Khairul Mazni , Mohamad (2013) Comparative study on stability of nanofluid using two different dispering agents. Project Report. UTeM, Melaka. (Submitted)

Mohd Khairur Rahim , Awang (2013) Start Stop System. Project Report. UTeM, Melaka. (Submitted)

Mohd Lutfi , Azmy (2013) Impact of carbonization process on briquette from palm oil residue. Project Report. UTeM, Melaka. (Submitted)

Mohd Luthfi , Omar (2013) Effect of using the second generation biodiesel and its blend in the compression ignition engines. Project Report. UTeM, Melaka. (Submitted)

Mohd Nor Azmi , Mohd Tarmiji (2013) Biodiesel production from waste vegetables oil using catalyzed transesterification. Project Report. UTeM, Melaka. (Submitted)

Mohd Nur Shafiq , Ahmad Razimi (2013) Co-processing of coconut shell and sugarcane residue as solid biofuel. Project Report. UTeM, Melaka. (Submitted)

Mohd Shazni , Halid (2013) Kenderaan Dua Alam UTeM : Analisa Pengendalian Dan Pemanduan. Project Report. UTeM, Melaka. (Submitted)

Mohd Syawal , Sulaiman (2013) Investigation of electric motorcycle performance in UTeM Kampus Induk. Project Report. UTeM, Melaka. (Submitted)

Muhamad Idzuan , Omar Maat (2013) Development of rainwater storage tank for residential area. Project Report. UTeM, Melaka. (Submitted)

Muhamad Syafiq, Md Najib (2013) Investigation on oil palm fiber composite mechanical properties. Project Report. UTeM, Melaka. (Submitted)

Muhammad Akmal Akif , Muhammad Wazir (2013) Experimental of flow measurement over different shape of cavities for low reynolds number. Project Report. UTeM. (Submitted)

Muhammad Aufa , Mohd Uzir (2013) Modular Design Of Fourth Generation For Fire Fighting Ground Vehicle. Project Report. UTeM, Melaka. (Submitted)

Muhammad Fahmi , Md Isa (2013) Rekabentuk Dan Fabrikasi Sistem Stering Dan Brek Kenderaan Dua Alam UTeM. Project Report. UTeM, Melaka. (Submitted)

Muhammad Faisal , Zaidi (2013) Pengauditan jumlah pembaziran tenaga elektrik di dalam bilik kuliah di UTeM. Project Report. UTeM. (Submitted)

Muhammad Faiz , Othman (2013) The design and fabrication of hydraulic boom trainer with gripper attachment. Project Report. UTeM, Melaka. (Submitted)

Muhammad Fakhrur Radzi , Sa'adon (2013) Carbonisation temperature effect on preparation of biochar from tanduk banana peel residue (musa paradisiaca fa. corniculata) as a solid biofuel. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hafiz , Abd Rahim (2013) Flow modelling of simplified human nasal cavity by using Computational Fluid Dynamics (CFD). Project Report. UTeM, Melaka. (Submitted)

Muhammad Hazwan , Ruslan (2013) Energy From Heat Using Heat Recovery Module. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hilmi Ruzaini , Hashim (2013) Investigation on the effect of recycling palm fiber composite on the mechanical properties. Project Report. UTeM, Melaka. (Submitted)

Muhammad Shukri , Ahmad Azazi (2013) Design Optimization Study On The Formula Varsity Car Chassis. Project Report. UTeM, Melaka. (Submitted)

Muhammad Yusri , Md Yusuf (2013) Effect of stanum on the properties of graphite-stanum composite for bipolar plate. Project Report. UTeM. (Submitted)

Muhammad Zikrillah , Yunus (2013) CFD analysis of heat source from electric vehicle battery system. Project Report. UTeM. (Submitted)

Muhammad Zulhakim, Sharudin (2013) Contaminant removal for different geometry of cavities with high Reynolds number using fluent. Project Report. UTeM, Melaka. (Submitted)

N

Nabil Fikri , Ahmad (2013) Fuel characteristics of biodiesel from waste vegetables oil using alkaline based catalysts. Project Report. UTeM, Melaka. (Submitted)

Neoh , Thiam Hwa (2013) Design and simulation of die and punch for sheet metal on bending. Project Report. UTeM. (Submitted)

Ng, Sze Ling (2013) Design And Simulation Of Three Dimensional Bending Machine. Project Report. UTeM, Melaka. (Submitted)

Ng, , Wei Tat (2013) The evaluation of machinability and surface roughness in conventional milling machine. Project Report. UTeM, Melaka. (Submitted)

Noor Ashikin , Jamil (2013) The effect of heat treatment on the microstructure and mechanical properties of 6061 aluminium alloy. Project Report. UTeM, Melaka. (Submitted)

Nor Syazwani , Mohd Ridzun (2013) Numerical modelling of 1-dimensional wave equation using finite difference scheme. Project Report. UTeM, Melaka. (Submitted)

Nur Al Hafizuddin , Mohd Arabai (2013) Stamp forming behaviour of palm fiber composite. Project Report. UTeM, Melaka. (Submitted)

Nur Ilmi , Mohamad Roslan (2013) A Non-Destructive Test Crack Detection Method Using Vibration Acoustic On Aluminium Plate. Project Report. UTeM, Melaka. (Submitted)

Nur Sabrina , Basharuddin (2013) A study on the effects of parameters for optimizing biodiesel production. Project Report. UTeM, Melaka. (Submitted)

Nuraini , Abd Latif (2013) Ergonomics Design Of Baby Carrier. Project Report. UTeM, Melaka. (Submitted)

Nurfarahin , Sulaiman (2013) Improvements Of Wheel Nuts Remover. Project Report. UTeM, Melaka. (Submitted)

Nurhafizah, Ismail (2013) Analisis Dinamik Kereta Lumba "Formula Varsity 2012". Project Report. UTeM, Melaka. (Submitted)

Nursakinah , Mahmud (2013) Analysis Of Wave Amplitude Modulation Effect For Variable Crack Orientations In Vibro Acoustic Inspection Method : Simulation Approach. Project Report. UTeM, Melaka. (Submitted)

O

Ooi, , Su Guan (2013) Effect of gold treatment on the mechanical properties of 316L stainless steel. Project Report. UTeM, Melaka. (Submitted)

Or, , Khai Hee (2013) A low noise duct ventilation using C- transition curve design. Project Report. UTeM, Melaka. (Submitted)

R

Rahfizan , Khairuzzaman (2013) An investigation on the influence of double heat treatment process on mild steel plate. Project Report. UTeM. (Submitted)

Rahiman Salmi , Rosdi (2013) Study Of Energy Regenerative Suspension System For Vehicle. Project Report. UTeM, Melaka. (Submitted)

S

Sasitharan , Yellapan (2013) Development Of Brake System For Reduced Scale Vehicle. Project Report. UTeM, Melaka. (Submitted)

Sean , John Mathew (2013) Modeling And Optimization The Effects Of Process Variables On Mechanical Properties Of AL-6061 T6 Robotic CO2 Weldments. Project Report. UTeM, Melaka. (Submitted)

Shazreena , Samat (2013) Effect of heat treatment on the microstructure and mechanical properties of low carbon steel. Project Report. UTeM, Melaka. (Submitted)

Sin, Chu Woon (2013) Design And Development Of Thermal Food Container. Project Report. UTeM, Melaka. (Submitted)

Siti Sakinah Munirah, Ishak (2013) A Study Of Sunflower Oil Performance As A Gear Lubricant. Project Report. UTeM, Melaka. (Submitted)

Siti Sarah , Zahari (2013) The heat transfer phenomenon within volumetric receiver of concentrated solar tower using Diamond Like Carbon (DLC) material. Project Report. UTeM, Melaka. (Submitted)

Stephanie Mujan , Hamilton (2013) Thermal insulation particle board made from sugarcane bagasse and kenaf fibers reinforced with polythlene. Project Report. UTeM, Melaka. (Submitted)

Syahidatul Syahira , Abdul Rahman (2013) Numerical modeling of 1-dimensional wave equation using finite modal synthesis. Project Report. UTeM, Melaka. (Submitted)

Syazwan , Zainuddin (2013) Fluid flow characteristic in curved tube heat exchanger by numerical method. Project Report. UTem, Melaka. (Submitted)

Syed Zulkarnain, Syed Saidin (2013) Formulation of nanofluid from carbon nanoparticle based for natural convective heat transfer application. Project Report. UTeM, Melaka. (Submitted)

T

Tan, Beng Hong (2013) Design, Optimization And Prototyping Of Multipurpose Weld Electrode Holder. Project Report. UTeM, Melaka. (Submitted)

Teng, Kuan Hui (2013) Experimental study of the behaviour of baphasic materials. Project Report. UTeM, Melaka. (Submitted)

Teo, Chun Earn (2013) Design and fabrication of polyvinyl chloride tie-rod cylinder for low pressure water hydraulic system. Project Report. UTeM, Melaka. (Submitted)

Tham, Kar Mun (2013) Exploring The Failure Mode And Mechanical Properties Of Spot Welded Dissimilar Joints For Austentic Stainless And Galvanized Steels. Project Report. UTeM, Melaka. (Submitted)

Thien, Kai Lip (2013) Total Design Of Multipurpose Tray For KTM Train Seat. Project Report. UTeM, Melaka. (Submitted)

Thong, Ming Chuin (2013) Redesign Of Bombardier PUTRA LRT Seat. Project Report. UTeM, Melaka. (Submitted)

Tuan Norhasmira , Tuan Haris (2013) Numerical modelling of simple harmonic oscillator. Project Report. UTeM, Melaka. (Submitted)

W

Wan Mohd Hanis , Wan Harun (2013) Investigation of thermal conductivity and viscosity of nanofluid. Project Report. UTeM, Melaka. (Submitted)

Wan Norazrini , Idris (2013) Model Matematik "Hibrid-Mekanikal Berasaskan Rim" Menggunakan Roda Tenaga Dwi-Jisim Untuk Mengoptimumkan Penggunaan Tenaga Dalam Motosikal Hibrid-Mekanikal. Project Report. UTeM, Melaka. (Submitted)

Wong, , Hee Kiong (2013) Measurement of structure-borne noise from road input in a motor vehicle cabin. Project Report. UTeM, Melaka. (Submitted)

Y

Yusra Liyana , Jaafar (2013) Feasibility study of the design artificial disc replacement prostheses. Project Report. UTeM, Melaka. (Submitted)