Items where Division is "Library > Final Year Project > FTK" and Year is 2015

Intan Zarina, Mohd Yusoff (2015) Optimization Of Aerodynamic On Side View Mirror. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Yong Lim (2015) Design And Development Of Sustainable Filament Extruder For 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faiz, Mohd Yusop (2015) Design And Analysis Of Low Cost Motorcycle Shock Absorber Test Rig Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirul, Isnan (2015) Addition Of Zinc Diamyldithiocarbamate Into Palm Oil As Physical Property Improver For Lubricant Substitution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farizzul Hakim, Mohd Saroji (2015) Addition Of ZDDP In Canola Oil As Physical Property Improver Vs SAE 40 Mineral Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Suhaimi, Samsudin (2015) Development Of Multibody Dynamics (MBD) Method For UTeM FV Malaysia Racing Car Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Akmal, Bahari (2015) The Measurement Of Broadband Radiation Field Generated By Lightning For Determination Of Lightning Strike Distance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Soo, Kok Yao (2015) Development Of Hybrid Wheel-Legged Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Za'im Junaydi, Yusof (2015) Sound Absorption Performance Of A Acrylic-Based Micro Perforated Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaid Fikri, Md Salleh (2015) Design And Development Functional Prototyping Formula SAE Knuckle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

'

'Afif , Mohd Maarof (2015) Voice controlled wheelchair by using visual basic. Project Report. UTeM. (Submitted)

A

A. Jalil, Hanisah Nadiah (2015) Design And Simulation Of In-Pipe Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aleff Nazriem, Abd Khadir (2015) Development Of Air Flow Sensor System To Monitor The Effectiveness Of Air Filter For 1000 Litre And 660 Litre Car Engine Capacity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Harith, Abd Halim (2015) Gas Detector For Safety Home Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Lah, Akmal (2015) Establishment Of New Standard Time For The Manufacturing Of Hot-Dip Galvanized Steel Of Tenaga Nasional Berhad (TNB) Concrete Pole Accessories. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Samat, Muhammad Nizam (2015) Investigation Of Nozzle Height Of Abrasive Water Jet Machining On Mild Steel Gear Surface Cutting Parallelism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Sukor, Abdul Aziem (2015) Design Of Grease Trap For Wastewater Management System Using Pugh Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Rosdi (2015) Experimental Study On Camshaft Profile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim , Jusoh (2015) Design and development of an omnidirectional spherical robot. Project Report. UTeM. (Submitted)

Abdul Malik, Abdul Hafeez (2015) Basic Design And Performance Analysis Of Micro-Hybrid Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Mu'iz, Abdul Hamid (2015) Anthropometric Characteristics Of Technology Campus Students And Their Relationship With Existing Bus Stop Bench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Muhaimin, Abdul Latiff (2015) High Power Inverter In Ambulance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Muizz , Mohd Muhayeddin (2015) Development of 6 legged hexapod robot (CH3 - R) body kit. Project Report. UTeM. (Submitted)

Abdul Rahim, Jaafar (2015) Study Of Selected Properties Of Low Density Alloy After The Heat Treatment Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Sarni Nur Atikah (2015) Development Of Heating, Ventilating And Air Conditioning (HVAC) Control Monitoring System (CMS) Using Arduino Microcontroller In Poultry House Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman , Mohd Nasir (2015) Shape optimization of generic side view mirror. Project Report. UTeM. (Submitted)

Abdul Razi, Muhammad Helmi Farid (2015) Study Of Resistance Spot Welding For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Shukor , Abdullah Zam Zam (2015) Effect of TBHQ addition in palm oil as antioxidizing agent in engine oil application : direct introduction method. Project Report. UTeM. (Submitted)

Adam Fitri , Kasni (2015) Development of new bio-lubricant for friction and wear reduction in automotive application. Project Report. UTeM. (Submitted)

Adi Amri, Ruzman (2015) Human Movement Support Using Radio Frequency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi Irwan , Herman (2015) Automobile bluetooth notify (MOBIFY). Project Report. UTeM. (Submitted)

Adi Khairi, Abdul Latif (2015) Robust Automated Guided Vehicle (AGV) Controller Design Method For Uneven Terrains Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adibah Hanun, Mohd Arif (2015) Design, Analysis And Simulation Of Casting Defect On Water Pump Housing Using Casting Simulation Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aeina Jannah, Zainal (2015) Experimental study on vibration isolation method using coconut fiber as an additional damping. Project Report. UTeM. (Submitted)

Afdzal Ridzuan , Khalid (2015) Active solar tracker. Project Report. UTeM. (Submitted)

Afeeqa, Abd Ghani (2015) Cutting Tool Parameter Optimization For Surface Roughness Of Mild Steel Material Using Taguchi Methodt. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Muhaimin (2015) Design And Assemble Photovoltaic Panel Using Monocrytalline Cells. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aiman, Che Zakeria (2015) Handgrip Pressure And Hand Movement Analysis While Driving On Perodua's Car Steering Wheel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aizat Aqmal , Hishamuddin (2015) Design and validate passive automotive engine mount system. Project Report. UTeM. (Submitted)

Ahmad Danial, Zakaria (2015) Development Of Thin Flat Chassis Of Multipurpose Remote Controlled Powered Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fakhrullah, Abdul Rashid (2015) The Effect Of Engine Oil On Vehicle Fuel Consumption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fathul Hakim, Rosli (2015) Green Cycling Helmet With Adjustable Light ''Be Safe Be Seen''. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hafiz , Ayob (2015) Single phase capacitor clamped multilevel inverter. Project Report. UTeM. (Submitted)

Ahmad Lotffi, Zakaria (2015) Digital Stopwatch Water Crops With GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Mursyid, Ramli (2015) Speed Control Of DC Motor Using MOSFET. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nu'aim , Zulkifli (2015) Barrier problem solving in line follower vehicle using ultrasonic sensors. Project Report. UTeM. (Submitted)

Ahmad Nur Faizzy, Ahmad Sabri (2015) The Effect Of Engine Oil On Vehicle Engine Characteristic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Salwan , Yahaya (2015) Security hazards alert and prevention system in specific area in industry by using GSM. Project Report. UTeM. (Submitted)

Ahmad Shafiq , Kula (2015) Laser engraving machine. Project Report. UTeM. (Submitted)

Ahmad Syafiq , Yazid (2015) Design and development of an all terrain mobile robot wheels. Project Report. UTeM. (Submitted)

Ahmad Syazili, Md Din (2015) Investigation On The Effect Of Machining Strategies On The Surface Finish And Dimensional Accuracy Of Five-Axis Flank Machining Of Curvy Angled Shapes (CONVEX). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Taqiuddin, Ahmad Sarimin (2015) Analysis And Simulation Of Service Continuity Enhancement By Using Automatic Protection System (APS) In Fiber Optic Communication Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tharmizi, Md Sukhaimi (2015) Crosswind Detection For Direction And Speed Monitoring System At Highway. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zhafran , Abdul Rahman Najib (2015) Maze solver mobile robot. Project Report. UTeM. (Submitted)

Aida , Mohd Nazib (2015) Smart flushing toilet system. Project Report. UTeM. (Submitted)

Akhyani , Alias (2015) Six sigma implementation to improve quality. Project Report. UTeM. (Submitted)

Akmal Hakim, Yukhanis (2015) Development Of Customized HMI Control System For MAP 202. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alia Najwa, Runuma (2015) Vacuum Casting: Fabricating A Pipe Reducer Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aliah Mastura , Mohd Nizam (2015) Design and application of machinery noise barrier using paddy straw fibre. Project Report. UTeM. (Submitted)

Alif Ikhsan , Karim (2015) Analysis of wheel rim on their design and strength. Project Report. UTeM. (Submitted)

Alwana , Azmil (2015) Study on the improvement of efficiency of thermal energy harvester. Project Report. UTeM. (Submitted)

Amar Faiz, Abdul Ghani (2015) RCCB Control For Home Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Fizal, Amir Razauddin (2015) Analysis On Effect Of Coconut Fibre Towards Impact Characteristics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amira Eleza , Azemi (2015) Minkowski fractal patch antenna for Wi-Fi application. Project Report. UTeM. (Submitted)

Amirul Aliff, Aminuddin (2015) Optimization Process By Using Design Of Experiments (DOE) For Fiber Optic Distance Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Rezza, Ishak (2015) Development Of Multiple Wireless Power Transfer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amzar Azfar, Zolkiflie (2015) Application Of Microfiber Sensor For Determining Olive Oil Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anis Nabila, Mohd Ismail (2015) Synthesis And Optical Characterization Of Mercury Diselenide (HgSe2) Thin Films. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aniz Farznor, Sariffuddin Hussani (2015) Investigation Of Design Rule For FDM System In Additive Manufacturing: A Case Study Of A Blender Jar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariff, Afif (2015) Development Of Wind Turbine Generator Trainer Set Using PIC System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arshad, Munirah (2015) Sleeping Sensoring And Alerting Devices For Drivers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arzadtul Ruziya , Zolkaply (2015) Robust motor speed control by using sliding mode control. Project Report. UTeM. (Submitted)

Ashrof, Suaib (2015) Design And Development Of A Navigation System For AGV. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asmida, Asri (2015) Pigeon Hole Smart Box For University Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayu Fateha, Abdul Hamid (2015) Lean Manufacturing At Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Mohamad Amin Ariff (2015) Design, Install And Monitor Of Hydronic Radiant Cooling System In An Enclosed Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhari, Nur Afifiah (2015) Preliminary Study Of The Availability Of The Using Gear Lube Oil Based On Local Palm Oil For Transmission Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azie Noor Marlia, Ruslan (2015) Design Analysis Of A Baby Stroller By Using Design For Manufacturing And Assembly Method (Boothroyd Dewhurst). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azis, Nurul Atikah (2015) Study Of Coating Properties For Aircraft Aluminum Alloy Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Muhammad Najib (2015) Design Of Chilled Floor System For Cooling In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hakim, Kamardin (2015) The Effect Of Piston Head On The Performance Of Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hakim, Noor Zubairi (2015) Portable Power Generator From Renewable Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrif Faris , Abdul Jalil Alwi (2015) Design and fabrication of semi-automated parts supply system for automotive industry. Project Report. UTeM. (Submitted)

Azrul , Abdillah (2015) Intelligent keychain. Project Report. UTeM. (Submitted)

Azwan , Muhamad (2015) Automatic system for car headlamp. Project Report. UTeM. (Submitted)

B

Badrul Muhaimin , Abdul Ghani (2015) Develop of smart digital notice board using GSM concept. Project Report. UTeM. (Submitted)

C

Carla Regina, Yaling (2015) Design And Simulation Of Go-Kart Active Rear Spoiler Air Foil Shape Using Computational Fluid Dynamics (CFD) Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Carvyn, Blaise (2015) A Fibre Optic Sensor On Acetone Concentration Detection Using Beam-Through Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ch'ng, Yau Yau (2015) Online Face Recognition System Using Artificial Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Wei Nick (2015) Pet Feeding System Using Raspberry Pi And GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Kok Leong (2015) Examination Of The Appropriate Equivalent Cylinder Radius For Buckling Of Cones Under Axial Compression. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chau, Kar Hoo (2015) Panic Sensing And Spontaneous Stability System To Avoid Accident. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ku Abdul Majid , Che Ku Ariffin (2015) Preventive maintenance (PM) system applying at JTKP's labs. Project Report. UTeM. (Submitted)

Chia, Anddy Kok Lik (2015) No Load Loss Calculation Of 90MVA 132/33kV Power Transformer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Sin Yi (2015) A Portable Embedded Gas Leakage Detection Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Hong Liang (2015) The Effectiveness Of The Control Indoor Environments In Miniature Model Of Poultry House (Assessment On General Ventilation System). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choong, Mei Teng (2015) Influence Of Additives On Sol-Gel Nanoporous TiO2 Thin Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

Danial Sophian, Onn (2015) Performance Analysis Of Formula Varsity Car Tyre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

Edriss Naqiyuddin, Md Khair (2015) Miniature Of Base Transceiver Station's Power Supply By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ellyana Shaira , Abd Aziz (2015) Human powered energy harvesting electronic device. Project Report. UTeM. (Submitted)

Erin Rabiatul Charmein, Noor Chaman (2015) Affordable System Preventing Deaths Of Children When Accidentally Left In Parked Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eu, Hue Ling (2015) Home Appliances Web Switch Control Wirelessly Using Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ezra, Abdul Mutalib (2015) Development Of Conceptual Jig And Fixture For The Tie Plate Using Integrated FMEA And AHP Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ezza Farhana , Hassan (2015) Smart trolley with RFID. Project Report. UTeM. (Submitted)

Ezzah Ezzatie , Esmom (2015) RFID document controlled room. Project Report. UTeM. (Submitted)

F

Fakhrul Faiz, Hamdan (2015) Development Of River Current Or Turbulence Energy Harvesting System : Comparative Study On The Energy Generating Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fara Maizura, Karia (2015) Automatic Power Source Inside Lecturer Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farizul Muiz, Alias (2015) Comparative Study Of Electronic Properties In Pristine And Si-Doped Single-Walled Carbon Nanotube As Gas Sensor: A First Principle Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimah, Morad (2015) Remote Monitoring Of Energy Meter Via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Afiqah, Jajuli (2015) Assessment On Thermal Comfort Among Staff In Library Centre Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Amira , Anuar (2015) Green feature modeling for home appliances conceptual product. Project Report. UTeM. (Submitted)

Fatin Nabilah, Abd Halim (2015) Development Of Home Security Alert System Using GSM Modules. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Syakira, Mohd Hassan (2015) Pneumatic Driven 180 Degree Rotation Pick And Place Mechanism With Conveyor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fazliana, Ahmad Buderi (2015) Assessment On The Impact Of Distributed Generation (Dg) Penetration On Grid Protection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

Gan, Puoh Yoon (2015) Quality Investigation Of Laser Processed Silicon Wafer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gue, Sey Yang (2015) Design Analysis Of A Children’s Scooter Using DFMA (Boothroyd Dewhurst) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hafizah, Abd Latif (2015) Lecturers Availability Display Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizuddin , Othman (2015) Sound energy to electrical energy : study on its suitable applications. Project Report. UTeM. (Submitted)

Halimahtus Sa'diah, Marsom (2015) Experimental Investigation Of Electrode Diameters On Surface Quality Of Mild Steel In WEDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanis Zahirah , Katmin (2015) A single pole double throw (SPDT) switch for wireless data communication. Project Report. UTeM. (Submitted)

Harry, Steven (2015) Potential Study Of Piezoelectricity Generation System From Vehicle Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasan, Nor Syazana (2015) The Study Of Asset Maintenance Practices For Solar Photovoltaic (PV) System In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasani, Nurul'Ain Sakinah (2015) Wireless Door Key System Using Bluetooth And Arduino (WeDoKey). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasfarizal, Farizad (2015) Design And Modification For Child Restraint Seat On Moped Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazali, Muhamad Shahrin (2015) Parametric Design And Analysis Of Automotive Suspension Coil Spring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazirah, Hassan (2015) Baby stroller movement control by android application. Project Report. UTeM. (Submitted)

Hazliz Fairuz Afzuan , Barruddin (2015) Smart home system using Android application. Project Report. UTeM. (Submitted)

Hifdzul Malik, Zainal (2015) Advanced green technology lighting system. Project Report. UTeM. (Submitted)

Ho, Jing Wen (2015) Cyclic Voltammetry Analysis Of HgSSe Thin Films. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hulamri, Omar (2015) Development Of Domestic Renewable Energy Using Windbelt Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Ibrahim, Abu Bakar (2015) Wireless Android-Based Wheelchair Control And System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibtisam, A. Hamid (2015) Design And Implementation Of Intelligent Home And Electrical Appliances Control Using Android And Wifi Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ida Fairuz, Wahid (2015) A Study And Development Of Four Quadrant H-Bridge DC Motor Controller Using PIC18F4550. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ieliyanarus Shahtznas , Mohmad Nasir (2015) Design radio frequency planning tool using MATLAB software. Project Report. UTeM. (Submitted)

Isa, Mohamed Azim Isam (2015) Novel Design An Indicator Of The Excessive Dust Particles Accumulation For The 1.0 HP Split Unit Air Conditioning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Iyyduroo, Mohd Sulaiman (2015) Development Of Car Safety System Via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Iznie Mariesha , Zailan (2015) Android based electrical housing appliances controlling system. Project Report. UTeM. (Submitted)

Izzat Aminudin, Mohamad Salji (2015) Development Of An Interactive System Using Voice Processor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Jamaludin, Muhamad Fadhil (2015) The Design Of Portable Hexagon Chicken Brooder That Provide Best Thermal Comfort For The Chicks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamil, Ab Hamid (2015) Autonomous Robot For Flatness Inspection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jernnetly, Jim Santos (2015) Analysis And Simulation Of Service Quality Enhancement By Applying Radio Over Fiber (ROF) In Communication Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Junis, Jacky Even (2015) Android Based Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kamaruzaman, Muhamad Fakri Hakim (2015) Design And Performance Analysis Of Solar Bicycle For A Sustainable Local Commute. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Aiman , Mohd Kamil (2015) Reverse engineering of spur gearbox. Project Report. UTeM. (Submitted)

Khairul Hazwan , Mohd Rasit (2015) Structural design and analysis of autonomous guided vehicle (AGV) for parts supply. Project Report. UTeM. (Submitted)

Khairul Nazemin, Mohd Yaaziz (2015) Integration Kano Model And Quality Function Deployment (QFD) Application For Design Improvement Of An Accessories Product Case Study: Umbrella. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulizani, Azman (2015) Virtual Testing Of Suspension Coil Spring Using FE Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairunnissa , Musa (2015) GSM car security system. Project Report. UTeM. (Submitted)

Khalidah Nabila, Mohd Elias (2015) Remote Heart Rate Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalilah, Khalid (2015) The Development Of Newly Design Arrow For Slingshot Shooting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Aries Chin Chin (2015) Effects Of End Mill Helix Angle On Accuracy Of Thin-Walled Aluminium Ribs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koid, Shi Hong (2015) Study Of Airflow On The Fixed Horizontal Louvers Shading Device For Commercial Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lai, Wei Yi (2015) Multi-Position Clamping Vise For Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Laina Sofia , Mahamad (2015) Reminder system integrated with GSM technology for hospital purposes. Project Report. UTeM. (Submitted)

Latif, Mohamad Ammar Faiz (2015) The Effect Of Cutting Parameter To The Hole Diameter Accuracy Of AISI D2 Tool Steel In Dry Drilling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leang, Suh Huah (2015) Production Process Simulation As A Decision Making Tool In Aggregate Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Siang Tau (2015) Implementation Of Theory Of Constraints On Buffer Management In Production Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Wei Hau (2015) Improvement Of The Efficiency Of Mini Thermoelectric Refrigerator By Using Peltier Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Zi Hao (2015) Two-Wheeled Balancing Robot Controlled Using Android Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Wai Yip (2015) Development Of Mobile Robot Using Rasberry Pi For Swarm Robotics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Boon Kiat (2015) Investigation Of Short Circuit Forces On Individual Turn Of Transformer Winding - FEM Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Mei Sze (2015) Web Based Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Louis, Teo Cheah Hong (2015) The Effect Of Semi-Vertex Angle On The Buckling Of Cylinder And Cones. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lu, Kian Hap (2015) The Effect Of Material Discontinuity On The Flanges Of Axially Compressed Cylinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Mariana , Arshad (2015) Improving the densification of tungsten carbide by liquid phase sintering. Project Report. UTeM. (Submitted)

Marsyitah , Mohamed Zin (2015) Wearable bracelet for child monitoring system. Project Report. UTeM. (Submitted)

Maryam Haryati , Abdul Raman (2015) The use of paddy straw fiber as an additional damper to reduce vibration transmissibility from hand-held power tools. Project Report. UTeM. (Submitted)

Mashassila, Md Ali (2015) Analysis And Simulation Of Object Locator In Trilateration GPS System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masiron, Nurafifah (2015) The Effect Of Different Cutting Tool Material To The Surface Finish Of D2 Tool Steel In Drilling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mastura Al-Nur, Abdul Aziz (2015) Vehicle Security System Via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mau, Han Pink (2015) Design And Development Of Pole Climbing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Ahmad Nizam (2015) Design Of An Intelligent Energy Saving Building Concept Using PID Approach For Indoor Gallery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Sazali, Mohamad Safwan (2015) Development Of Grid Frequency And Analyse The Data In Real Time. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Menzi, Lee Meng Zhen (2015) Intelligent Vehicle Parking System Of All Shopping Complex In Malaysia With Radio Frequency Identification (RFID). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mior Kamalrul , Mior Abd Aziz (2015) Development of laboratory pic microcontroller trainer. Project Report. UTeM. (Submitted)

Mohamad, Mohd Syafiq Syimir (2015) Finite Element Analysis Of Tray Cover Design For Digital Versatile Disc Player. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ariff Haikal, Badrul Hisham (2015) The Effect Of Cutting Parameter To The Hole Diameter Accuracy Of Aisi D2 Tool Steel In Drilling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fadhlan, Ahmad Lothfy (2015) Vehicle Tracking & Locking System Using Global Positioning System (GPS) And Global System Mobile (GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faizul, Mohamad Fouzi (2015) Blood Glucose Test Device Via Global System For Mobile Communication (GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hafiz, Mat (2015) Automated Streetlight Malfunction Alert System (ASMAS) By Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hafizi , Saari (2015) Design and structural analysis of rear suspension swing arm for air powered motorcycle (APM). Project Report. UTeM. (Submitted)

Mohamad Hazerul, Md Sehat (2015) UTeM FV Malaysia Racing Car Suspension Optimization Using Geometrical Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Haziq , Siraj (2015) Development of built in air temperature monitoring device for cooling tower. Project Report. UTeM. (Submitted)

Mohamad Husyairi, Hasrin (2015) Modelling, Characterisation And Force Tracking Control Of A Magnetorheological Damper For Automotive Suspension. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ikram, Mohamad (2015) Human Activity Analysis Using DELMIA Ergonomics On JTKP Milling Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ilham, Mazlan (2015) Mini Site Survey Using Drone And Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Izani, Mohamad Azmi (2015) The Determination Of Suitability Condition For Cooling The Lightning Detection System Using Peltier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Najib Fahmi, Ahmad Pisol (2015) Development Of Controller For Ground Water Well By Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nazrin , Jamar (2015) Experimental analysis and study of spark plug in 4-stroke gasoline engine. Project Report. UTeM. (Submitted)

Mohamad Razman, Mohamad Rudzi (2015) Alert Message By Using Wireless System For Pigeon Hole. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Rossaifuddin, Mohamad (2015) Development Of Rope Climbing Robot Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Saleh, Safie (2015) M-Learning Application For Android. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Salleh, Mohammad Fazrin (2015) Design A Billing Estimation For Domestic Usage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Saufi, Subari (2015) Performance Of CVD Coated Carbide Tool By Optimizing Machining Parameters During Turning Titanium Alloy Ti-6Al-4V ELI In Flooded Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shafik, Othman Ludin (2015) Access Door Lock Via Android Phone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shahril Ikhmal , Samsaimon (2015) Extended Electric Motorcycle Consumption And Range Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shahrul Amierul , Ramli (2015) Design and analysis of formula student racing car suspension system. Project Report. UTeM. (Submitted)

Mohamad Syazwan, Ahmad Yusri (2015) Biker Communication Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Yunus , Ismail (2015) Smart elevator via android system. Project Report. UTeM. (Submitted)

Mohamad Yusri, Ahmad Badarudin (2015) Development Of PC-Based Digital IC Tester Using Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zahuri, Jamil (2015) Design And Analysis Of Base Assembly For Flange Resurface Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zawawi, Abdul Razak (2015) Design Of Automated Guided Vehicle (AGV) For Workpieces Transportation In Manufacturing Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Farid, Hamdian (2015) Security system via SMS. Project Report. UTeM. (Submitted)

Mohamed Hariri, Muhammad Faeez (2015) A Study On Energy Efficiency For Lighting In Small Scale Room Using Lumen Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Izham Hafiz, Mohamed (2015) Design An Interleaved Buck Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Ruhaizzat , Mohamed Din (2015) Conceptual design of air engine system for air powered motorcycle. Project Report. UTeM. (Submitted)

Mohamed Sabri, Mohammad Fadhil Hanafi (2015) Design An Application Of Microperforated Noise Silencer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad, Mohamad Riduan (2015) Study The Potential Of Submerge Pico Hydro Generation System In Water Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Arif, Abd Aziz (2015) Development Of Control System By Using HMI For MAP 201. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Firdaus , Norazman (2015) Hybrid solar-wind generator for small scale electronic devices. Project Report. UTeM. (Submitted)

Mohammad Hafiz, Zulkefli (2015) GUI Controlled Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syafieq, Sazali (2015) Anthropometric Dimensions And Preferred Working Surface For The Lecturer Office. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syafiq , Mohd Sarif (2015) The application of time compression technologies of an artifact in Malay carving (mould of 'Papan Pemanis'). Project Report. UTeM. (Submitted)

Mohammed Ashraf, Mohammed Faudzi (2015) Parametric Optimization Of Abrasive Waterjet Machining (AWJM) On Aluminium Using Taguchi’s Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akhir, Muhammad Hafiszan (2015) Car Seat Security System For Unattended Child Using GSM Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akram, Mohd Noh (2015) Development Of Auto Filling Water System Using PIC16F877A. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amir Afifi , Abd Razak (2015) Home security system using zigbee. Project Report. UTeM. (Submitted)

Mohd Amirullah , Muhammad (2015) Design enhancement and analysis of pigging device for heat exchanger fouling cleaning. Project Report. UTeM. (Submitted)

Mohd Arif , Yaakub (2015) Improvement of ride quality for passenger vehicle using the magnetorheological damper. Project Report. UTeM. (Submitted)

Mohd Arif Faiz, Jumahat (2015) Implementation And Improvement Of Air Hole And Fin Shape Technology Towards Bicycle Helmet Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azrie, Ismail (2015) Wireless Announcement Board At Schools And Colleges. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Taher (2015) Design And Development Of Autonomous Sweeper Robot For Badminton Court. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz, Hat (2015) Development Of Hand Gesture Robot Using Xbee Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz , Mohd Saisi (2015) Smart sensor system for argicultural. Project Report. UTeM. (Submitted)

Mohd Farhami , Ahmad Kamal (2015) Design and analysis of space frame chassis for formula students racing car. Project Report. UTeM. (Submitted)

Mohd Firdaus, Halim (2015) Testing Tools For Mobile X-Ray Battery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Juhari (2015) Optimization Of The UTeM FV Malaysia Race Car Suspension System Design To Reduce Rolling Effect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Omar (2015) Experimental analysis and study of fuel saver device. Project Report. UTeM. (Submitted)

Mohd Fizree , Yaacob (2015) Design and analysis of chassis frame for single seated electric vehicle. Project Report. UTeM. (Submitted)

Mohd Hafes , Rosli (2015) Design and validation of army vehicle suspension system in longitudinal direction. Project Report. UTeM. (Submitted)

Mohd Hafiz , Chek Pa (2015) Effect of argon gas ratio to quality of gas welding. Project Report. UTeM. (Submitted)

Mohd Hafiz Fahmi, Abdol Sukor (2015) Study On The Effect Of EDM Die Sinking Parameters On The Surface Finish Of Mild Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizudin, Hashim (2015) Design And Analysis Of Blanking And Bending Die For Thimble Open Small By Using ANSYS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hakim, Ramli (2015) Development Of Mobile Air Flow Monitoring Device For Finned Fan Cooler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hasrul Hafiidz , Mohd Zaid (2015) Design and fabricate suspension system for formula student racing car. Project Report. UTeM. (Submitted)

Mohd Hazrin, Mohd Ibrahim Khan (2015) The Effect Of Axial Crack Length On The Plastic Buckling Of Relatively Thick Cylinder Subjected To Axial Compression. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hazroy, Rahaman (2015) The Effect Of Engine Oil On Vehicle Emission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hudairee, Hasim (2015) Design And Analysis For FV Electric Vehicle Racing Car Chassis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jaffri Din, Norzati Emilia (2015) Smart Home Security System By Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamarul Hafis, Abdul Aziz (2015) Effect Of Suspension Spring Stiffness On FV (Formula Varsity) Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamil , Che Mat (2015) A repair and overhaul methodology for 4 stroke gasoline engine. Project Report. UTeM. (Submitted)

Mohd Khairul Nizam, Suhaimin (2015) Suspension Development And Analysis Of Multipurpose Remote Controlled Powered Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mundzir Muzzammil, Mamat (2015) Design And Development Of Sport Utility Vehicle Dynamic Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazrin, Mohd Zaini (2015) Design And Develop An Outdoor Thermoelectric Energy Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nizam, Mohd Zin (2015) Develop Stretchable Wheelchair And Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nur Ikhwan, Abdul Samad (2015) The Effect Of Silane Coupling Agent On The Tribological Properties Of Recycled Carbon Fiber Reinforced Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Qayyum , Mohd Zulkifli (2015) Conceptual design and static analysis of chassis structure for air powered motorcycle (APM). Project Report. UTeM. (Submitted)

Mohd Razi, Abdul Mutalib (2015) Design And Development Of Smart Drying For Clothes Enhancement On Overall Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Safwan, Mohd Aszemi (2015) The Design And Development Of Portable Electroless Nickel Plating Apparatus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salim, Norazraie (2015) The Development Of Pressure Sensor For Piping System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salleh, Mohd Azdhari (2015) Analysis On Kenaf Fiber Effect Toward Compression Characteristics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sidik, Mohd Akmal (2015) Vehicle Speed Control System Using Wireless Communication Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahiran , Saramudin (2015) Investigation of defects in transfer moulding process of the automotive glass run channel specifically for the corner joint. Project Report. UTeM. (Submitted)

Mohd Taufik, Muhammad Syahmi (2015) A Dual Axis Active Solar Tracking Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusof, Mohd Amir Safwan (2015) Application Of The Cooling Pad As Evaporative Cooling System In Poultry House. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusof, Nur Qulbiah (2015) Eliminate Waste At Production Line By Implementing Kaizen Approach To Enhance Product Quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zahir , Kamarudin (2015) Conceptual design and analysis of a novel wave energy harvester for Malaysian shore. Project Report. UTeM. (Submitted)

Mohd Zharif, Omar (2015) Analysis Of Planetary Transmission System Flywheel Hybrid Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulfadhli, Salehan (2015) Product Identification And Robotic Arm Controller System Using Artificial Neural Networks And Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhilmi, Nasharuddin (2015) Egg Incubator With Bluetooth Controller Interface With Powered Android Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohiddeen, Iddin (2015) Design And Validation Of Army Vehicle Suspension Systems In Lateral Direction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mok, Juan Hong (2015) Image Processing And PLC Based Conveyor Belt System For Industrial Automation And Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Afiq, Kamal Arifin (2015) Design And Development Of Wooden Mold Base For Educational Kits. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Afnan , Mohd Aris (2015) Comparative performance of single speed and continuous variable transmission (CVT) for air powered motorcycle (APM). Project Report. UTeM. (Submitted)

Muhamad Anuar, Che Ismail (2015) The effect of varying chilled ceiling position on thermal comfort. Project Report. UTeM. (Submitted)

Muhamad Ashraf , Zulkifli (2015) Design and analysis of clutch system for flywheel hybrid module. Project Report. UTeM. (Submitted)

Muhamad Azriff , Zulkapli (2015) Traffic light with warning voice. Project Report. UTeM. (Submitted)

Muhamad Azwan, Aziz (2015) Design And Analysis Of Low Cost Shock Absorber Test Rig For Suspension Parameter Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Faisal, Sabri (2015) Flash Flood Intimation Over GSM Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Faisal, Tamar (2015) Addition Of ZDDC In Corn Oil As Antioxidant As Lubricant Substitution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Faiz, Che Pa (2015) Development Of Alternative Power Supply To Charge Small Gadgets. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Fareed , Mohd Rafi (2015) Automated physics demonstrations controlled using visual basic. Project Report. UTeM. (Submitted)

Muhamad Habib , Ahmat Khohairi (2015) Development of ubiquitous home security system using android application and arduino ethernet. Project Report. UTeM. (Submitted)

Muhamad Hafizuddin , Mustafa (2015) Android-based wheelchair controller. Project Report. UTeM. (Submitted)

Muhamad Hanif , Zahari (2015) Mistake proofing jig a method to improve Risk Priority Number (RPN) in process FMEA. Project Report. UTeM. (Submitted)

Muhamad Husni , Hussein (2015) Development of knee braces for osteoarthritis patient. Project Report. UTeM. (Submitted)

Muhamad Khaleeq, Ahmad (2015) Particle swarm optimization based approach for minimization power loss. Project Report. UTeM. (Submitted)

Muhamad Luqmanulhakim, Suhaimi (2015) E-mail Notifier For Energy Saving. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Norazamudin, Noordin (2015) The Human Analysis And Ergonomics For The Seat Design Of Electric Scooter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Shahril Azly , Mohammad Yunus (2015) Multimode stage light. Project Report. UTeM. (Submitted)

Muhamad Shazwan , Sharif (2015) Car alarm system via GSM. Project Report. UTeM. (Submitted)

Muhamad Suhaidi , Samsudin (2015) Design and analysis of suspension system for extreme buggy. Project Report. UTeM. (Submitted)

Muhamad Syahriman, Yahya (2015) Redesign motorcycle transmission with reverse gear. Project Report. UTeM. (Submitted)

Muhamad Taufiq Amri, Saharddin (2015) Developing a prisoner escape detector security system using very high frequency implementation for Jabatan Penjara Malaysia. Project Report. UTeM. (Submitted)

Muhamad Yusri , Che Yusoff (2015) The conceptual design and analysis of used cooking oil filtration process for bio lubrication application. Project Report. UTeM. (Submitted)

Muhammad Abdul Hadi, Che Ali (2015) Temperature Control Using Peltier For Cooling The Apparatus Of Lightning Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afiq, Arsat (2015) Sound Absorption Performance Of Acrylic Based Perforated Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afiq, Ramli (2015) Design Of Single Phase Power Factor Correction For Domestic Use. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afiq , Abdul Rahman (2015) Development of wireless remote control for an outdoor antenna using servo rotate in 360°. Project Report. UTeM. (Submitted)

Muhammad Afiq , Jalaludin (2015) Design and analyze of flywheel plate for flywheel hybrid module. Project Report. UTeM. (Submitted)

Muhammad Aiman , Abd Nasir (2015) Design and analysis of shaft and housing for flywheel hybrid module. Project Report. UTeM. (Submitted)

Muhammad Aisamuddin, Idris (2015) Effects of abrasive on ceramic tile cutting process using abrasive water jet machine (AWJ). Project Report. UTeM. (Submitted)

Muhammad Aizat, Md Alias (2015) Development Of Airflow Sensor System Towards Air Intake Filter In 1000cc Car Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Akif, Mohd Yahya (2015) The Influence Of Crack On The Buckling Of Axially Compressed Truncated Cones. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Akmal, Zohizam (2015) Optimization Process By Using Design Of Experiment (DOE) Method To Increase Performance Of Fiber Optic Glucose Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Alif, Abdul Rahman (2015) Development Of Portable Mini Thermoelectric Generator For Outdoor Activities And Emergency Situations By Using Easily Available Heating And Cooling Sources. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aliff, Abdulah (2015) Microfiber Sensor Application For BCAA (Protein) Concentration Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Amin, Muhamad (2015) GSM Surrounding Home Area Intruders Security. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Amirul Hakim, Jumali (2015) High Technology Medicine Pillbox. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Arif, Kamalruzaman (2015) The Study Of Effect Of Engine Oil Viscosity On Engine Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Arif, Ramli (2015) Recharging Of Flywheel Hybrid Module Through Acceleration Phase. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Arif Fahmi, Shabaruddin (2015) Wireless Monitoring System For Racing Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ayub, Md Zain (2015) Development Of Control System For MAP 203 Using Human Machine Interface (HMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Azfar, Amree (2015) Development Of A Dryer Food Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Azlan Shah , Ibrahim (2015) Portable etching machine. Project Report. UTeM. (Submitted)

Muhammad Fadhil , Ismail (2015) Design and fabrication of chassis frame for formula student racing car. Project Report. UTeM. (Submitted)

Muhammad Fahiszrulzaki, Md Yusof (2015) Smart Dustbin Monitoring Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fahmi, Yusof (2015) Development Of Vacuum Cleaner Robot Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faikar , Ahmad Razef (2015) Safety car alert system. Project Report. UTeM. (Submitted)

Muhammad Faiq, Maharam (2015) Development Of Wireless And Intelligent Home Automation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz Hafizuddin, Mohd Nawi (2015) Fiber Optic Sensor For Palm Oil Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Farhan , Mohamed Khalid (2015) The development of in vivo post circumcision (analysis on market testing). Project Report. UTeM. (Submitted)

Muhammad Farid , Mohd Zain (2015) Electrical power supply failure information system. Project Report. UTeM. (Submitted)

Muhammad Farid Anwar , Mohd Shukri (2015) Study on the effectiveness of bicycle tire to suppress road transmitted vibration. Project Report. UTeM. (Submitted)

Muhammad Faridhwan, Shofri (2015) Novel Conceptual Design And Simulation Of Rear Pressure Different Air Flow Correction Device Using Computational Fluid Dynamic (CFD) Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fassirin, Ismail (2015) The Study Of Air Flow Behaviour With Various Speed And Angle Towards Bicycle Helmet Design Aerodynamicity Through CFD Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fauzi, Muslih (2015) Automated Guided Vehicle System (AGV) System With Flexible Direction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus, Zainal (2015) Robotic arm and conveyor controller. Project Report. UTeM. (Submitted)

Muhammad Hafiz , Mohamed Yunus (2015) Self-driving toy car. Project Report. UTeM. (Submitted)

Muhammad Hafiz , Sulaiman (2015) Video transmission implementation of optical fiber concept in communication system. Project Report. UTeM. (Submitted)

Muhammad Hafizuddin, Jumali (2015) Development Of Microcontroller-Based Data Acquisition System For Environmental Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haikal , Shamshuri (2015) Poka Yoke jig implemantation to improve productivity at manufacturing industry. Project Report. UTeM. (Submitted)

Muhammad Hamizan , Adnan (2015) Wallet detection between mobile phone by using bluetooth. Project Report. UTeM. (Submitted)

Muhammad Hanafi, Mujtahidin (2015) The Development Of Small Scale Hydroponic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hanafi , Mohd Najib (2015) Cordless charging for various device. Project Report. UTeM. (Submitted)

Muhammad Harith, Mohsin (2015) Development Of Mobile Robot Control By Android Via Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hariz, Ahmad Johari (2015) Smart Controlled Electrical Appliances Via Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haziq, Ahmad Din (2015) Development Of Blind Person Tools By Using Ultrasonic Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hijlal, Jamalulil (2015) Experimental Study (Comparison) Of Engine Rubber Mounting’s Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hikmal Hakim, Abd Hamid (2015) Anti-Theft Mosque Fund Using Global System For Mobile (GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Idris, Sulaiman (2015) Power Source Management System Of Electric Vehicle Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Imran , Ismail (2015) Automatic lime cleaning machine controlled by Android system. Project Report. UTeM. (Submitted)

Muhammad Izzat Iqbal, Supandi (2015) Design And Fabricate Mold For Polymer Based Interlocking Tiles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Kamil, Abdul Wahab (2015) Automatic car fire extinguister system. Project Report. UTeM. (Submitted)

Muhammad Khairil Anwar, Idris (2015) Optimization Of Aerodynamic Package For Formula Varsity Racing Car To Reduce Drag Force Using CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Khairul Anwar, Roslan (2015) Analyse, Develop And Fabricate New Tactical Knife For Military Using Long Forgotten Keris Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Mu'az, Jaafar (2015) Autonomous vision-based QR code recognition. Project Report. UTeM. (Submitted)

Muhammad Nabil, Ab Kadar (2015) Simulation Of Crash Impact On A Formed Sheet Metal Using Hypercrash And Radioss. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nabil, Mohammed Sufian (2015) The Experimental Investigation Of Fatigue Test For Spot Welded Structural Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Najmuddin, Nazli (2015) Remoted Operated Car Robot By Using Mobile Phone (Arduino). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nazim , Mohd Bashir (2015) Design and analysis of pitching and rolling control for passenger car. Project Report. UTeM. (Submitted)

Muhammad Nizam , Zainal Abidin (2015) Portable ablution machine with solar system. Project Report. UTeM. (Submitted)

Muhammad Norsyafiq , Md Nasib (2015) Conceptual design and performance analysis of the air motor for air powered motorcycle. Project Report. UTeM. (Submitted)

Muhammad Nur Izhar, Abd Rahman (2015) Design And Development Of A Hand-Arm Support : Lifting Wheelbarrow And Loading Banana Fruit Into The Wheelbarrow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nurhadi, Sharifuddin (2015) Application Of Microfiber Sensor For Ethanol Concentration Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Qamaruddin, Mohd Ahyan (2015) Process Optimization Of EDM Cutting Process On Tool Steel Using Zinc Coated Electrode Wire. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Qasrin Asyraf , Ahmad Shabri (2015) Design and simulation of investment casting mold for obsolete automotive part. Project Report. UTeM. (Submitted)

Muhammad Ramdan, Mat Ali (2015) Extended Electric Motorcycle Battery Mount Design, Analysis And Installation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Razif , Md Ali (2015) The smart door lock system. Project Report. UTeM. (Submitted)

Muhammad Safuan, Md Salleh (2015) Design And Assembly Analysis Of Differential Gear Box For UTeM FV Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shafiq, Othman (2015) Smart Display For Bus Arriving Management System Based On Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shahid , Suhaimi (2015) Design and analysis of automotive component for aluminium alloy casting. Project Report. UTeM. (Submitted)

Muhammad Shahril, Safarim (2015) Fire Alarm Monitoring System (FIREAMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Sharmmil Azmi, Hamzah (2015) A Study Of Harvesting Potential Wind Energy Based On Turbulence Effect On The Side Of The Car Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Sobrie, Amil (2015) Smart Home System: Water Sprinkle With Rain Sensor Controlled By GSM Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syahir, Mohd Nadzri (2015) Effectiveness Of Corn Oil And Zinc Dialkyldithiophosphate (ZDDP) As Antioxidant In Four Stroke Motorcycle Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syahmi, Selamat (2015) The Development Of Smart Point Of Sale Scanner For Shopping Mall. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syameel, Zanal (2015) Improvement of commercial vehicle suspension system using MR damper. Project Report. UTeM. (Submitted)

Muhammad Syazwan, Rosidi (2015) Performance Analysis On The Effects Of Filler Material On HDPE Plastic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syukri, Md Salleh (2015) Enhancement Of Control System Using HMI For MAP204. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Taukhid, Mohammad (2015) Wireless Power Transfer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yusran, Muhaiyuddin (2015) Development Of A Prototype For Solar Powered Smart Water Waste Unit (Overall Structure). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zahid , Kamarudin (2015) Work study analysis to improve productivity at manufacturing process company. Project Report. UTeM. (Submitted)

Muhammad Zaki , Abdul Razak (2015) Implementation of microfiber optical concept for temperature sensor development by using aluminium rod. Project Report. UTeM. (Submitted)

Muhammad Zawani Affendi, Suhaimi (2015) Application Of The Microfiber Sensor For Monitoring Concentration Of Acetone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zubir , Ramli (2015) Analysis of fiber optic concept for glucose sensor development. Project Report. UTeM. (Submitted)

Muhammad Zulhilmi , Mohd Hanafi (2015) Develop fuzzy logic to monitor the health of transformer by using DGA. Project Report. UTeM. (Submitted)

Muhd Amirul Zulhilmi , Mohd Saru (2015) Design and analysis a lightweight knuckle for improving the formula student racing car. Project Report. UTeM. (Submitted)

Muhd Nur Asyraf , Rusli (2015) Portable car monitoring system. Project Report. UTeM. (Submitted)

Muhd Shamil Iqram , Razali (2015) Design and analyze the transmission system for flywheel hybrid module. Project Report. UTeM. (Submitted)

N

Nadiah Zafirah , Al-Azmi (2015) Perception of the thermal environment in library centre at UTeM : subjective preferences and thermal comfort due to air conditioning system. Project Report. UTeM. (Submitted)

Najwa Syafiqah, Samhudi (2015) Fiber Optic Sensor Of Temperature Measurement For Tunnel Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Namerah , Ibrahim (2015) Smart housing system. Project Report. UTeM. (Submitted)

Naqisyah, Nazer (2015) Design Optimization Of Drain Cover Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nas Mustaqim Walad, Ahmad (2015) Design And Development Of Customized Drinking Bottle For SME. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasir, Nurfarahin (2015) Design Optimization Of Solar Pumping Water Filter For Sustainable And Water Quality Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Naurah Jasmin , Sahid (2015) Analysis of the car ventilation system and enhancement using solar power. Project Report. UTeM. (Submitted)

Nazamuddin , Yusuf (2015) Design and development of a spherical robot. Project Report. UTeM. (Submitted)

Nazrin, Mokhtar (2015) Design And Development Of An Optimised Thermoelectric Cooler For Active Processor Cooling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Shea Cheing (2015) Development Of A Prototype For Solar Powered Smart Water Waste Unit (Machine Elements). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Shu Juan (2015) Optimization Of Moulding Composition For Quality Improvement Of Sand Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Ahmad Rafiuddin , Nik Leh (2015) Smart control electrical appliances via RF module. Project Report. UTeM. (Submitted)

Nik Isna Zulkarnain , Nik Iskandar Ariff (2015) Improvement of automotive engine vibration using semi active engine mount system. Project Report. UTeM. (Submitted)

Nik Nazirul Amin, Nik Muhamad Amin (2015) MCB Trip Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Nur Faeezan , Nik Yusoff (2015) Second used packaging. Project Report. UTeM. (Submitted)

Nik Nur Faraheda , Nik Zulkifli (2015) Respiratory health problems among library staffs at Universiti Teknikal Malaysia Melaka : indoor air quality perspective. Project Report. UTeM. (Submitted)

Nishanthinidevi, Jayraman (2015) Frequency Reuse In Orthogonal Frequency Division Multiple Access Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nizamuddin, Osman (2015) Effect Of Fuel Octane Rating On Engine Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nohamad Zullfiqar , Hamlee (2015) The effect of using aluminium sheet for thermal comfort. Project Report. UTeM. (Submitted)

Noor 'Ein, Abdullah (2015) The automated monitoring robot (MOBOT). Project Report. UTeM. (Submitted)

Noor Aiman, Mohd Azman (2015) Design Monitoring Position System Of UTeM Bus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azhar , Mohd Yusof (2015) SMART E-Ticketing system using QR code (SEQR). Project Report. UTeM. (Submitted)

Noor Azreen , Hamzah (2015) Design and analysis of space frame chassis for solar car challenge. Project Report. UTeM. (Submitted)

Noor Eman, Utok (2015) Design Optimization Of Stiffened Square Plate Under Uniformly Distributed Pressure Of 5 Pascal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Farahiyah, Asan (2015) Development Of Measurement Heartbeat And Body Temperature Via Zigbee. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Sarah , Mohd Shah (2015) Auto watering system using Arduino. Project Report. UTeM. (Submitted)

Noor Syazwani Simaa, Abu Hashim (2015) Development Of Fiber Optic Sensor For Water Level Measurement Using Fiber Optic Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nooradila, Zaine (2015) Fiber Optic Sensor For Corn Oil Concentration Detection And Optimization Performance Using Analysis Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorbaini, Abd Hamid (2015) Evaluation Of Manufacturing Process Choice Using Analytical Hierarchy Process (AHP) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorfazlyanisyuain , Zainal (2015) Application of lean manufacturing using value stream mapping. Project Report. UTeM. (Submitted)

Nor Amira, Mat Kila (2015) A Analysis And Simulation Of Fiber To The House (FTTH) As An Access Technology In Fiber Optic Communication Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azlan , Abdul Rahim (2015) Assessment on false tripping phenomenon in lower ground floor (Right Wing), main building, Faculty of Engineering Technology, UTeM. Project Report. UTeM. (Submitted)

Nor Azmira, Nor Azmi (2015) Study on indoor air quality and sick building syndrome among staffs in library at Universiti Teknikal Malaysia Melaka. Project Report. UTeM. (Submitted)

Nor Hafira Nadia, Cm Hatta (2015) Development And Analysis Of Flexible Thermoplastic Composite Laminate For Anti Stabbing Apllications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Izni, Azizan (2015) Design of dual polarized antenna for mobile communication. Project Report. UTeM. (Submitted)

Nor Mohd Aris Raof, Jali @ Ali (2015) Analysis on the fabrication of silica optical microfiber sensor coated with zinc oxide for sensing different uric acid concentration. Project Report. UTeM. (Submitted)

Nor Saadah, Mohamad (2015) Development Of PLC Controlled Servo-Driven Motor Application System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Sariza, Ismail (2015) Water Quality Data Transmitter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Shahirah, Zulkifli (2015) Design radio frequency coverage tool using MATLAB software. Project Report. UTeM. (Submitted)

Nor Syafiq, Jefridin (2015) Design Of Chilled Ceiling System For Cooling In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Syairah, Salleh (2015) Design And Development Of Wireless Power Transfer For Implant Biomedical Device (PTIBD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noraini, Ismail (2015) Modelling Effect Of Cutting Speed And Feed Rate In Bone Drilling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazira, Jani (2015) Design, Simulation And Analysis Of Disc Rotor Using Anycasting Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazlina, Mohamad (2015) Smart Aquarium Using Global System For Mobile Communication (GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norehan , Kasiman (2015) Monitoring and evaluation of the effect of crack on the buckling behaviour of welded cylindrical structures. Project Report. UTeM. (Submitted)

Norhairi, Abd Halim (2015) Intelligent Pigeon Hole With E-Mail Notification Using Wireless System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhamimi , Mohamad (2015) Automatic light switcher. Project Report. UTeM. (Submitted)

Norhasyikien , Abdul Murad (2015) Traffic congestion detection and alert using PIC. Project Report. UTeM. (Submitted)

Norhazwani, Baharudin (2015) Appointment Scheduling In Health Care Industry By Using Modeling And Simulation : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norizzat, Mohd Jais (2015) Analysis And Simulation Of High Quality Performance Of Optical Repeater For Fiber Optic Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norleha, Isroni (2015) Smart Home Application Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norshadatul Akmar , Mat Shadid (2015) Development of green noise barrier using coconut fiber. Project Report. UTeM. (Submitted)

Norshahida , Mohd Saidi (2015) Design of dual band Frequency Selective Surface (FSS). Project Report. UTeM. (Submitted)

Norsharimie , Mat Adam (2015) UMTS antenna design. Project Report. UTeM. (Submitted)

Norzaratul Ain , Ismail (2015) Study The Surface Roughness Of AISI 1045 Carbon Steel By Using Dry CnC Turning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aadila , Abdul Malek (2015) Smart wireless-voice command electrical lamp controlling system. Project Report. UTeM. (Submitted)

Nur Adila , Kamarudin (2015) Handphone triggered switches. Project Report. UTeM. (Submitted)

Nur Afifi, Ibrahim (2015) Development Of Controller For Boost Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ainna, Abdul Rahim (2015) Design of defected reflector antenna. Project Report. UTeM. (Submitted)

Nur Amanina, Mohd Arisan (2015) Hi-Tech Underground Sprinkler Controller Using WiFi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Amira, Anang (2015) Design Of Controllers For Tracking Performance Of XY Table Ball Screw Drive System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Amira , Zulkifli (2015) Mobile object detection using radar system. Project Report. UTeM. (Submitted)

Nur Asyiqin , Mohd Hanifah (2015) Design and analysis of 1KW off grid solar photovoltaic project for rural electrification. Project Report. UTeM. (Submitted)

Nur Atiqah Khairiah, Ghazali (2015) The airbone fungi contaminant in library centre at Universiti Teknikal Malaysia Melaka Melaka (UTeM) : assessment on the HVAC system. Project Report. UTeM. (Submitted)

Nur El Shahira, Shari (2015) A Study On Productivity Improvement In Production Line By Implementation Of Lean Principles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ezzy Fazyra, Md. Yunus (2015) Machinability Study Utilizing Vortex Machining Approach - Delcam Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farahain , Abu Bakar (2015) Life cycle assessment (LCA) of hand dryer using CES-Edupack software. Project Report. UTeM. (Submitted)

Nur Farhana, Mohd Amir (2015) Attendance Monitoring System Via Mobile Phone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farhanah, Zulkipli (2015) Wireless Temperature Monitoring System Using Wi-Fi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fatihah , Madi (2015) The effect of different thickness material stacking for four layer spot welding. Project Report. UTeM. (Submitted)

Nur Fatin Husna , Sharudin (2015) Design children alert system using radio frequency FM techniques. Project Report. UTeM. (Submitted)

Nur Hadzmi , Ibrahim (2015) Solar multipurpose power supply. Project Report. UTeM. (Submitted)

Nur Halimah, Jamalulil (2015) A Framework To Identify Operational Factors In Overall Equipment Effectiveness (OEE) Towards Lean Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hanisah, Jasmi (2015) Experimental Study Of Different Hot Flue Air Speed Effects On Young Coconut Grain Moisture Level And Resulting Retention Time At Fixed Hot Flue Air Temperature. Project Report. UTeM, Faculty of Engineering Technology . (Submitted)

Nur Hazirah, Ismail (2015) Shape Based Matching Gluing Defect Using Gaussian Filtering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hidayah, Mohammed (2015) Product Development Of Bottle Water Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hizzuanna, Hazizan (2015) A Study On Machining Strategies For Pocketing Profiles Outward Helical, Offset On Part One Way And Offset On Part Zigzag. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Humaira, Abd Halil (2015) Comparative study : different types of solar panel and its efficiency in Malaysia. Project Report. UTeM. (Submitted)

Nur Izzati , Muhamad Zin (2015) A web based system for controlling home equipments. Project Report. UTeM. (Submitted)

Nur Izzatul Hani , Md Nasir (2015) Improvement of anti roll bar for rollover prevention in automotive application. Project Report. UTeM. (Submitted)

Nur Izzaty, Mahtar (2015) Water Lavel Monitoring System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Liyana , Azizan (2015) Intelligent receiving box integrated with GSM network. Project Report. UTeM. (Submitted)

Nur Mohd Haniff, Shalsam (2015) A Study On The Potential Of Peltier In Generating Electricity Using Heat Loss. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Nabilah, Mohd Akhir (2015) Design Satellite Simulation Tool Using Matlab. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Nadia Atiqah , Mohamad Dzuhaimin (2015) The adoption of simultaneous engineering (SE) in design-manufacturing interface in automotive new product introduction (NPI). Project Report. UTeM. (Submitted)

Nur Qurratul Ain, Adanan (2015) Evaluation Of Value Stream Mapping Using Simulation In Textile Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Sabiha, Hasbullah (2015) Analysis On Cornering Performance Of PLC Based Mobile Robot Navigation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Sakinah , Shaharuddin (2015) Self-elected inverted pendulum by high performance control technique. Project Report. UTeM. (Submitted)

Nur Shafiqah Nadira, Samsul Bahrim (2015) Automatic Class Attendance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Shahirah , Azeman (2015) Automatic smart kitchen system using microcontroller. Project Report. UTeM. (Submitted)

Nur Su'Aidah, Mohd Hamdan (2015) Constant Voltage / Frequency (VF) Control Speed Of Three Phase Induction Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syafiqah, Mohd Ses (2015) Development Of Car Plate Number Recognition System : An Implementation Of Mvtech Image Processing Library. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syuhada, Sulaiman (2015) Designing A Boost Converter For Solar Energy Harvesting Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuradebah , Burhan (2015) Refrigeration monitoring and controller system. Project Report. UTeM. (Submitted)

Nuraiman, Samli (2015) Machinability Study On Various Five Axis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuraini, Shafiei (2015) Development Of Portable Intelligent Air Conditioning Device Using Peltier And Seeback Effect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurbazilah , Abdul Halim Lim (2015) Inlet and outlet configurations effect on thermal comfort. Project Report. UTeM. (Submitted)

Nurfarahin Najwa, Mohd Razak (2015) Efficient planned maintenance system for automobiles engine by means of oil based condition monitoring - a case study of UTeM student bus. Project Report. UTeM. (Submitted)

Nurfazlina, Ramli (2015) GSM Based Application For Controlling Water Sprinkler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfirhani , Ali Mohamad (2015) Overall labor efficiency study at manufacturing company. Project Report. UTeM. (Submitted)

Nurhafiza , Zinalass (2015) Design and simulation of cooling channel for plastic injection moulding. Project Report. UTeM. (Submitted)

Nurhanis , Lokmanulhakim (2015) Control and stabilize system for temperature in operation theatre by using microcontroller. Project Report. UTeM. (Unpublished)

Nurhayati Amir , Nurdin (2015) Effects Of Cutting Parameters On Surface Roughness Of Aluminium Al6061 When Machining Using 3-Axis CnC Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhazimah, Mohd Hamka (2015) Implementation Of Value Stream Mapping (VSM) In Textile Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurliyana, Zulhanee (2015) Proposing Future Value Stream Mapping For Safety Pin Manufacture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nursyawal Aidill, Aziz (2015) Perfectiveness Of Palm Oil And Zinc Dialkyldithiophosphate (ZDDP) As Antioxidant In Four Stroke Motorcycle Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nursyazwani, Jamil (2015) Smart green technology farm. Project Report. UTeM. (Submitted)

Nurul Ainiza, Mohammad (2015) Automatic Water Level Control And Dirt Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Alwani, Hassan (2015) Mailbox Notification Via SMS Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Amalin , Mohamad Razali (2015) Design microwave link budget and interference analysis. Project Report. UTeM. (Submitted)

Nurul Amira, Abdullah (2015) Tour Apps To Promote Langkawi In Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Atiqah, Rahman (2015) Particle Swarm Optimization (PSO) For Simulating Robot Movement On Two (2) Dimensional Space Based An Odor Sensing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Bazilah, Mohd Sabri (2015) Investigation On Tool Wear Characteristics When Machining FC 300 Gray Cast Iron With Uncoated Carbide Flat End Mill. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Farahizzati, Zakaria (2015) Design Of Shielded Metal Arc Welding (SMAW) Workstation For Safe Posture And Weld Quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Fariq Ariffin, Isa (2015) Remote Controller For Multi Electrical Home Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hatiqah , Harun (2015) Feasible study on dental restoration using time compression technologies. Project Report. UTeM. (Submitted)

Nurul Hazwani, Ismail (2015) Parent Access Using Radio Frequency Identification (RFID) Smartcard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Shamin, Shamsudin (2015) Design And Implementation Of PLC Based VFD System For Three Phase Induction Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Suhailah , Saadon (2015) Modelling and simulation of rotary inverted pendulum design. Project Report. UTeM. (Submitted)

Nurul Syazni, Ismail (2015) A gas alert system by using Arduino. Project Report. UTeM. (Submitted)

Nurulfarah Afiqah , Mohammad Azmi (2015) Smartphone activated door lock using wifi. Project Report. UTeM. (Submitted)

O

Othman, Muhammad Syah Akhimullah (2015) Analysis On Effect Of Kenaf Fiber Towards Impact Characteristic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Rahman (2015) Optimizing The Race Car Dynamics And Performance On Virtual Race Track. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Siti Aminah (2015) Smart Door Monitoring System Using Arduino And Magnetic Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

P

Phua, Chun Haw (2015) Optimisation Of Magnetorheological Damper Test Rig For Automotive Suspension. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Rafeek Ahmad, Mohamed Aiman (2015) Reverse Engineering On 3D Scanned Data For CAD/CAM Programming Using Delcam And Catia V5 Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahizan, Mohamad Rafiuddin Syahmi (2015) Design And Analysis Of Arm Assembly For Flange Resurface Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Khairul Azmi, Raja Nordin (2015) Design And Development Semi Circle Current Measurement Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Muhammad Ariff, Raja Ibrahim (2015) Vehicle Monitoring And Tracking System Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramakrishnan, Karthigeyan (2015) Enhance The Performance Of Condenser By Using Evaporative Cooling Method For Split Type Air Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramizah , Shaharudin (2015) 'You have mail' post box content notification using zigbee. Project Report. UTeM. (Submitted)

Razali, Ahmad Rifdi (2015) Enhancement Of The New Drying Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razlan, Siti Hajar (2015) Study The Effect Of Capacitor On Home Appliance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rodzali, Mohamad Abdul Qahhar (2015) Regulating The Combination Of Photovoltaic And Battery System For Lightning Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohmat, Muhamad Afiqri (2015) Comparative Study Of Effectiveness Between Glycol And Water As A Refrigerant Medium. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruzaidi , Razali (2015) Validation and improvement of 14-DOF ride and handling model for passenger vehicle (electronic resource). Project Report. UTeM. (Submitted)

S

S.Rusman, Mohd Ridzuan (2015) Development Of Identification System For Cloud And Ground Flashes Lighting Using Pattern Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safiuddin Azri , Mhd Hassan Zaini (2015) Determination of suitable routing protocol based on network analysis with different scenarios. Project Report. UTeM. (Submitted)

Sahariman, Muhd Afif Zulhilmi (2015) An Alternative Static Green Technology Generator For Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saidatul Akmal, Shabri (2015) Preparation And Characterization Of Form-Stabilized Paraffin/Polycaprolactone (PCL) Composites As Phase Change Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saidin, Mohd Khairul Idham (2015) Frequency Analysis Technique For Determination Of High Voltage Insulation Material Surface Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saifullah Aizzat, Abdullah (2015) Single-phase cascaded h-bridge multilevel inverter. Project Report. UTeM. (Submitted)

Salbiah, Kepli (2015) Development of a solar photovoltaic mounting system for a flat roof in a hot climate (Malaysia). Project Report. UTeM. (Submitted)

Sapiei, Nor Suhaidah (2015) Design Optimization Of 250WP Stand Alone Portable Solar PV For Remote Area Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saravanan, Sukumaran (2015) The Planning Of Handover In 3G Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarifuddin, Mohd Amirullah (2015) Springback Effect On Various Thickness Of Mild Steel, Stainless Steel And Aluminium Sheet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Scully, Darren John (2015) Investigation On The Effectiveness Of Using Phase Change Material As An Energy-Free Passive Cooling System In Buildings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shafarina Wati , Ismail (2015) Optimization of wireless charging system based on induction mechanism. Project Report. UTeM. (Submitted)

Shafie, Safwan Hanif (2015) Investigation The Sun Radiation Effect On Internal Air Temperature By Using Solar Tinted Film In Faculty Of Engineering Technologies (FTK). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahida, Remle (2015) A Study Of Surface Roughness Of Aisi 1045 Carbon Steel By Using Wet CnC Turning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrul Reeza, Shahrin (2015) A Study Of The Performance Of Campro 1,600cc Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shariful Redzuan Naquiddin, Abd Lah (2015) Development Of A Simulation Based Kanban System for Lean Practitioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Amidah, Ali (2015) Design And Development Of Shower Wheelchair For Rehabilitation Person. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Annisaq, Idris (2015) Fiber Optic Sensor For Olive Oil Concentration Measurement And Optimization Of Sensor Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Asmira, Abdul Rahman (2015) Semi-Automated Machine To Make Soap From Used Cooking Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Farhani , Mohd Amin (2015) Temperature monitoring system for infant incubator using Arduino. Project Report. UTeM. (Submitted)

Siti Fatimah, Mohd Amin (2015) Home Security With Gas And Fire Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hajar, Din (2015) The Effect Of Cutting Parameter To The Surface Finish Of Aisi D2 Tool Steel In Dry Drilling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hasnaa, Zainal (2015) Effect Of ZDDP Addition in Canola Oil As Antioxidizing Agent For Lubrication Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nor Aqilah , Ahmad (2015) Application of phase change material in thermal energy storage. Project Report. UTeM. (Submitted)

Siti Nor Shahida , Md Desa (2015) Engine starter using Android and bluetooth. Project Report. UTeM. (Submitted)

Siti Norzaleha , Abdul Rahman (2015) Preliminary study of the availability of using lube oil based on palm oil as local straight vegetable oil for engine application. Project Report. UTeM. (Submitted)

Siti Nur Faezah , Abdul Razak (2015) The conceptual design and analysis of used lube oil filtration process for industrial application. Project Report. UTeM. (Submitted)

Siti Nur Humaira , Mazlan (2015) Design analysis of a vacuum cleaner using DFMA (boothroyd-dewhurst) method. Project Report. UTeM. (Submitted)

Siti Nurhashima, Ismail (2015) Domestic LPG Leakage Detection System Using Microcontroller And GSM Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Quratul Nadia , Sufian (2015) Effect of ZDDP addition in corn oil as antioxiding agent for lubrication application. Project Report. UTeM. (Submitted)

Siti Shahara, Dolah (2015) Optimization For Maintenance Staffing Needed Using Spreadsheet Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Shamila, Yakabasah (2015) Design Analysis Of Retractable Hose Mechanism Using DFMA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Suhaila , Jaapar Sidek (2015) Automatic traffic light controller for ambulance. Project Report. UTeM. (Submitted)

Siti Umairah , Kamaruzaman (2015) Wi-Fi based sensor network for an agricultural environment. Project Report. UTeM. (Submitted)

Siti Zulaikha , Abdul Mutalib (2015) Direct modelling CAD study for product development process. Project Report. UTeM. (Submitted)

Solehuddin, Sofi (2015) Design Enhancement And Analysis Of Lube Oil Filtration Process For Engine Lubrication Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Solihin, Muhammad Zulfadhli (2015) Production Defect Reduction By Using Six Sigma (DMAIC) In Rubber Gloves Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suraya, Saad (2015) Parameter Selection For Machining Various Type Of Material In Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sureshkumar, Subramian (2015) Development A Prototype Of Solar Powered Smart Water Waste Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syafiq, Zamsari (2015) Design And Analysis Of Automotive Suspension System Using Semi-Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syaidatul Huzaliza , Shamsudin (2015) Walking stick embedded with wireless earphone. Project Report. UTeM. (Submitted)

Syamimi Wahidah, Ahmad Nizar (2015) Fiber Optic Sensor (FOS) For Ethanol Detection And Optimization Performance Using Analysis Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazwani, Ghazali (2015) ATM Security System With GSM Integrated Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Al-Amin, Syed Amer (2015) Digital Door Lock Wireless Access Monitoring And Control System Based on GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Ghazali Jalalulin, Syed Amirul Mustaqim (2015) New Design For Clothes Drying Application By Using Gas Stove. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Muhammad Alif, Syed Ahmad Ruslan (2015) Predictive Tools For The FV Racing Car Disc Brake Squeal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sylvester, Sulip (2015) Extended Hybrid Electric Motorcycle Motor Mount Design, Analysis And Installation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Ta'hirah , Reman (2015) Wireless centralized access smart home. Project Report. UTeM. (Submitted)

Tan, Jia Zhen (2015) Human Activity Analysis Using DELMIA Ergonomics In JKTP Machining Technology Laboratory (Lathe). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Ong Leng (2015) Development Of Hand Gesture Glove As Computer Pointing Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Ser Chow (2015) Improvement Of Front Wheel Steering System Due To Side Wind. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufiq, Mohd Sallah (2015) Development Of Safe Travel Luggage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Chee Hong (2015) Design Flexibility Study For Product Development Using Direct Modeling CAD System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Hoo Yeow (2015) Smart Outdoor Clothing Rack And Curtain Blade Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Zaharin , Tengku Zainal (2015) Development of mobile heat detecting device for cooling tower. Project Report. UTeM. (Submitted)

Terrence, Mark Adrain (2015) A Study Of Harvesting Potential Wind Energy Based On Turbulence Effect On The Side Of The MPV (MULTI-PURPOSE VEHICLE) Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tham, Jie Ren (2015) Design And Development Of Piezoelectric Energy Harvesting System On The Street Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tian, Su Yee (2015) Application Of NFC Smartphone In Intelligent Public Transport. Project Report. UTeM, Melaka, Malaysia. (Submitted)

U

Umizhatul Najwa , Jamaludin (2015) Design and analysis of injection moulding feed system of automotive part by using Taguchi approach. Project Report. UTeM. (Submitted)

V

Vinod Kumar, Isweran (2015) Multiple Valve Spring Compressor (MVC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wan Ismail, Wan Nor Afifah (2015) Applying 7QC Tools To Measure Product Quality Performance At Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Muhammad Faiz, Wan Mohamed Arshad (2015) Role Of Intermetallic Compound On Thermal Crack Propagation Of Lead Free Solders. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nuhairi, Wan Salleh (2015) Implementation Of One Way Communication In Fiber Optic Cable For Development Of Microphone System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Wafiy Iffat , Wan Jusoh (2015) Motorcycle security system using GSM and RFID. Project Report. UTeM. (Submitted)

Wan Zaura Azureen , Wan Zinal (2015) Design of compact multiband antenna. Project Report. UTeM. (Submitted)

Wong, Daphne Jie Yin (2015) Validation Of Pressure Distribution On Generic Side View Mirror By Experimental And Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Lin Ten (2015) Cost of ownership for efficiency lighting analysis. Project Report. UTeM. (Submitted)

Y

Yang Nurhidayah Asnida , Norizan (2015) Secret compartment technology. Project Report. UTeM. (Submitted)

Yap, Hui Mei (2015) Comparison Study Between The Effect Of Vortex Air Cooling And Conventional Cooling On Flank Wear And Surface Roughness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yasmin , Bisran (2015) Design solar panel: considering aesthetic value. Project Report. UTeM. (Submitted)

Yeoh, Li Ching (2015) Design Of Car Hood Lifting Mechanism Using Sensitive Hydraulic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Chin Yi (2015) Design And Development Of Customized Drinking Bottle Cap For SME. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zainal Abidin, Anati Zafirah (2015) Intelligent Al-Quran Flipper For Imam And Khatib. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Arifin, Muhamad Faidhi Zakwan (2015) An Automatic Bottling Process System For Monitoring And Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Muhamad Zubaidi (2015) Addition Of Zinc Diamyldithiocarbamate (ZDDC) In Canola Oil As Physical Properties Improver For Lubricant Substitution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Nurul Nadiah (2015) The Evaluation Of Production Line Performance By Using ARENA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zubair , Abdul Malik (2015) Bus tracker by using Global Positioning System (GPS) And Global System Mobile (GSM). Project Report. UTeM. (Submitted)

Zulaika , Mohd Zain (2015) Design and analysis of 1MW on grid connected solar photovoltaic power system in Malaysia. Project Report. UTeM. (Submitted)

Zulhilmi , Zaid (2015) Portable heart rate monitor. Project Report. UTeM. (Submitted)

Zulkhurnain, Nur Dayana Fatin (2015) Measurement Of Magnetic Field Generated By Lightning For Determination Of Lightning Strike Direction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zuraida Azlinda , Zulkapli (2015) Heat controlling system based on PIC for poultry house application. Project Report. UTeM. (Submitted)