Items where Division is "Library > Final Year Project > FTKMP" and Year is 2018

A

Abd Talib, Mohamad Syahaqil (2018) Study On Impact Of Several Types Of Metals In Simultaneous Tire Wrench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Aida Nazifa (2018) Investigation Of Coverlay Adhesion By Acrylic-Based Adhesive On Copper-Polyimide Laminate For Flexible Printed Circuit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Azri Shah (2018) Study On Extreme Pressure (EP) Properties Of SN0W20 Grade Engine Oil With Different Type Of Nanoparticles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Farah Azwani (2018) Material Selection For Natural Fibre Composite Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Sallehuddin Kaus (2018) Design And Analysis For Development Of Portable Air Cooler Using Phase Change Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kudus, Nuratifah (2018) Electromyography Sensing On Tibialis And Peroneus Muscle Against Improvised Flat Feet Orthotic Insole. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Latiff, Nurizzatul Zahirah (2018) Investigation Of Coverlay Adhesion By Epoxy-Based Adhesive On Copper-Polyimide Laminate For Flexible Printed Circuit. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Malek, Asnawi (2018) Design And Development Of Platform For Large Object 3D Printer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Murad, Mohamad Farhan Azhar (2018) Numerical Study Of Engine Air Intake Airflow Performance On Commercial Bus (Pioneer Coach Builder). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Aini Azirah Sofea (2018) Design And Development Of Portable Lactate Storage By Applying Peltier Module As Energy Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Noor Izzati (2018) Design And Simulate Water Vapor Flow In Heat Exchanger By Varying Pitch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Hassan, Nurul Aisyah Syamimi (2018) Design And Evaluation Of Bus Aircond Ducting System For Betterment Using Numerical Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adam, Nur Wardah (2018) Thermal, Physical And Environmental Friendly Characteristics Of Bio Based Composites Derived From Sugarcane Fibre And Potato Starch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Anis Adrina (2018) Microwave Transesterification Of Waste Cooking Oil (WCO) Using Waste Cockles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, ZainalFirdaus (2018) Development Of Smart Vehicle Blind Spot Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fazil, Muhammad Aimin (2018) Design And Development Of Hitting System For Head Concussion Test Rig. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Iqbal, Ahmad Syafiq (2018) The Study Of Thermoplastic Corn-Starch Composite Reinforced By Short Alkaline Treated Pineapple Leaf Fibre On Mechanical,Physical And Environmental Propertie. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Saifulzaman, Raidah Rauhah (2018) Heat Recovery Process In Design And Development Of Integrating Hot Water Dispenser With Portable Air Conditioner By Using Peltier Effects. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Arashid, Ahmad Syahmi (2018) Study Of System Integration Of Portable Ablution Using Solidworks. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alis, Izzati Fatin (2018) Experimental Study On Mechanical Behavior In 3D Printed Part Using Fused Deposition Modelling (FDM) Method : The Oil Palm Fiber Reinforced Thermoplastic Filament As Raw Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aman, Mohd Asyraf (2018) Investigation On The Characteristic Of Thermoplastic Cornstarch (TPCS) Composites Reinforced Short Pineapple Leaf Fiber (PALF) By Using Different Method Of Preparation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amir, Mohd Anas (2018) Vibration Analysis For Misalignment On Spur And Helical Gear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiruddin, Amirul Afiq (2018) Study On Solar Heat Collector For Absorption Refrigeration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Abdul Hanan (2018) Design And Fabrication Of Flippable Car Hazard Triangle Using Car Floor Mat As Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Siew Khim (2018) Effect Of Stitching On Kenaf Woven Fabric Embedded Thermoplastic Binder System In Intraply Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ariff, Nor Azimah (2018) The Study Of Surface Roughness For AISI 1018 Using Boron Steel Cutting Tool Texture In Wet Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Askari, Rahmah (2018) The Influence Of Sol Volume And Heating Temperature On Ti02 Sol-Gel Coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Asyul Sultan Saidi, Zulhelmi (2018) Effect Of Cogon Grass Fibre On The Thermal, Physical And Environmental Characteristic Of Thermoplastic Cassava Starch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, A’bdul Rahman (2018) An Investigation On Gasoline Engine Misfire Fault Using Multi Sensors And Analyzing With Vibration Signal Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Muhammad Faiz (2018) Vibration Statistical Analysis (VSA) Of Gasoline Engine's Abnormal Valve Crack By Accelerometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhanuddin, Danial Hafizuddin (2018) Analysis Of Assessment On The Muscle Fatigue Associated Towards Male And Female Drivers. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Azhari, Muhamad Aimran (2018) Analysis Of Efficiency On Different Types Of Fuel For Perodua Car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Abdul Muizz (2018) Investigation On The Effectiveness Between A Residential Modern Roof Design And Traditional ‘Malay-Style Kampung’ Roof Design In Malaysia To Accommodate Rainwater Drainage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Faris (2018) Driving Comfort Studies For Different Absorber Content : Hydraulic Oil Versus Pressure Gas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Nur Fudhail (2018) The Investigation On Mechanical, Physical And Environment Properties For Different Method Of Fabrication On Cornstarch Composties Reinforced By Pineapple Leaf Fibre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Syairul (2018) Development Of Pico Turbine System On The Downspouts Using Rain Water. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrin, Aqilah Husna (2018) Microwave Assisted Transesterification Of Jatropha Oil Over Natural Waste Cockles Catalyst Of Biodiesel Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Bahari, Muhammad Najib (2018) Digital Image Correlation On Piping Condition Monitoring Using Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharudin, Muhammad Syukri (2018) Effect Of Stitching On Jute Woven Fabric Embedded Thermoset Binder System In Intraply Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bala Subramaniam, Parthiban (2018) Sensitivity Study On Front Suspension Hardpoint Of Formula SAE Race Car Towards Vehicle Dynamics Characteristics. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Che Wahab, Muhammad Syahir (2018) An Innovative Automatic System Design To Start-Up Engine For Preheat Session Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Yong Hao (2018) Development Of Filter Test Rig To Determine Filter Efficiency Based On Three Different Angle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Shong Hee (2018) Design And Analysis For Development Of Natural Based For Scale Model Furniture Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Peh Han (2018) Design And Analysis Of Passive Knee Exoskeleton. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choong, Bo Yee (2018) A Simulation Study Of Line Balancing Using Arena Simulation Software In Industry 4.0 Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chow, Zhi Chin (2018) Design And Analysis Of Gripper System For A Mobile Robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chuah, Xuan Hong (2018) A Study Of Visual Management System To Manage Warehouse Logistic Resources At LiKom. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

F

Farid Waradi, Muhammad Fadli (2018) A Study On Gasoline Engine Abnormal Valve Clearance Using Accelerometer Analyzed By Vibration Signature Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fazir, Muhammad Amirul Fahmi (2018) Case Study For Rear Wheel Bearing For Motorcycle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fung, Asnidah Rosleh (2018) Study Of The Buckling Behaviour Of Axially Compressed Cylinder With Sinusoidal Uneven Length. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

Ghazali, Azlini (2018) A Study On Patient Bed For Ergonomic Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gunalan, Thiviya (2018) Overall Labor Efficiency Study Using Maynard Operational Sequence Technique At Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hamzah, Nur Habibah (2018) A Study On Gasoline Engine Fuel Octane Numbers Using Accelerometer Analyzing With Multi Statistical Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanapiah, Luqmanulhakim (2018) Application Of Single Minute Exchange Die And Analytical Hierarchy Process (AHP) Concept For Small Manufacturing Enterprise. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Harun, Nur Hanis (2018) Design Improvement Of Corner Chair For Cerebral Palsy Kid. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hashim, Muhamad Hanif (2018) Mechanical Dispersion Of Carbon Nanotube For Chloroprene Rubber Compounding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hashim, Nur Aina Markdyiah (2018) Fabrication Of New Filament Wire From Oil Palm Reinforced Thermoplastic Composites As Feed Stock For Fused Depositioning Modeling (FDM) Using Extrusion Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasmat, Feti Nur Alia (2018) The Effect Of Addition Abrasive Water Jet Waste On The Green Strength And Permeability Of Sand Mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasnan, Nur Ajrun Wafa (2018) Investigation Of Spot Welding Fatigue Properties In Dissimilar Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hee, Kar Cheng (2018) Design And Analysis Of Passive Hip Exoskeleton. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hj Ab Maullod, Nur Syazana (2018) Defect Improvement Towards Productivity For SME Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

I

Ibrahim, Muhammad Uzair (2018) Prototype Development Of Collision Preventation System During Traffic Jam Situation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Siti Azillah (2018) Parameter Optimization Of Surface Roughness For AISI 1018 For Low Carbon Steel In Wet Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ideris, Norfatin Mazwani (2018) Design And Simulate Bed Chair With Front Rest For Chronic Patient. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Idzham, Ibrahim (2018) Improvement For Kuih Kapit Production Through Waste Elimination And Process Upgrading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Igai, Peter Renang (2018) Mechanical Coffee Machine (Traveler’s Portable Coffee Machine). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Ahmad Afiq Afifi (2018) Investigation And Analyse Of Cooling System For Motorcycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Muhammad Taufik (2018) Friction And Wear Characteristics Of ATF Oil With Nano Additive On Local Palm Oil For Automotive Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

J

Jamal Mohamed, Muhammad Izzat (2018) Fabrication Of Bottom Modular Nozzle For Abrasive Waterjet Machine By Using High Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamil, Mohd Redzuan (2018) Optimization Of Treated SN 0W20 Grade Engine Oil Enhance With hBN Nanoparticles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Justin, Ferdiedica (2018) Comparison Study Of Noise Emission Test Of Different Bus Model From Interior. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kamal, Nurul 'Aini Haziqah (2018) Tensile Study Of Chloroprene Rubber With Coal Ash As Green Filler Reinforcement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kek, Shian Ghee (2018) Design Improvement Of A Better And Healthier Toilet Stool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ker, Boon Chai (2018) Monitoring Of Environmental Emission From (SLS) 3D Printer Using 100% Recycled Polyamide (PA12). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khiruddin, Muhammad Afif Akmal (2018) Effect Of Grass Fibre On The Morphological And Mechanical Properties Of Thermoplastic Cassava Starch Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kho, Siew Wen (2018) Design And Fabrication Of Working Prototype Chiller And Warmer Storage For Breast Milk Using Peltier Effect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Chin Ee (2018) Design And Development Of Ergonomics Table. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khosni, Muhammad Azri (2018) Development Of Low Cost Portable Lifter For Split Unit Installation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Komaruddin, Muhamad Ramdan (2018) Design And Fabricate Mini Heat Exchanger For Water Cooling System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kooh, Fu Xing (2018) Design And Analysis Of Robotic Arm System For A Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kua, Ning Way (2018) Integrated Overall Performance Effectiveness (OPE) And Simulation For Flexibility Enhancement During Changeover In Production Assembly Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kumaran, Thanis (2018) Investigation On The Effect Of Machining Parameters In Edge Trimming Of Carbon Fibre Reinforced Plastic (CFRP) Meterial. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lapatelo, Muhammad Hanif (2018) Optimization Parameter Of Surface Roughness For AISI 1018 Low Carbon Steel Using Boron Insert In Wet Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Sin Hong (2018) The Effect Of Sitting Posture In CAD Designer Workplace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lie, Ahmad Faisal (2018) Design And Simulate Autonomous Steam Iron Stand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Lim, Pei Shan (2018) Development And Analysis Of Portable Oil Filtration Of Recycled Wasted Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lin, Wei Lin (2018) The Study Of Muscle Fatigue On Wrist And Lower Back In Gym Activities Using Electromyography (EMG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Duncan Ruey Shan (2018) Effect Of Stitching On Woven Jute Fabric Embedded With Thermoplastic Binder System In Intraply Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Grace Kian Hwai (2018) Design And Analysis Of Passive Shoulder Exoskeleton. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Suet Leng (2018) Productivity Planning To Reduce Waste By Simulation In Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Louis, Geldverond (2018) Design And Fabrication Of Small Scale Waste Paper Recycling Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lye, Michelle Chuok Fang (2018) Effect Of Stitching On Kenaf Woven Fabric Embedded Thermoset Binder System In Intraply Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M

Mahidan, Fairuz Mardhiah (2018) Investigation Of Buckling Behaviour Of Axially Compressed Cone With Uneven Axial Length Having Sinusoidal Waves. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahusin, Daniel Ariff (2018) Design And Fabrication Of Motorcycle Cornering Warning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mansor, Muhammad Hanif (2018) Preliminary Study Of Mechanical Properties For Different Composition Of Kenaf Mix With Natural Binder Through Impact Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masyop, Nur Fatikah Hanim (2018) Examination Of Buckling Behaviour Of Axially Compressed Cylinder With Uneven Length Having Square Waves. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Amin, Nur Amirah (2018) Product Design And Development Of Organic Waste Composter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Hassan, Muhammad Syazwan (2018) The Impact Of Engine Performance On Naturally Aspirated : Case Study Ignition Setting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Saidi, Muhamad Ali Aqil (2018) Performance Analysis Of Car Air Conditioning System Under Scheduled Maintenance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazlan, Mohamad Aqmal (2018) Study Of Cooling System Design For iPhone Case. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazli, Amirul Husaini (2018) Examination Of Buckling Behaviour Of Cone-Cylinder Transition Under Axial Compression. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohajir, Muhammad Faiz (2018) Effect Of Waste Mussels On Biodiesel Production From Rubber Seed Oil Using Microwave Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Abdul Rashid (2018) Optimization Of Dimensional Accuracy Of Fused Deposition Modeling (FDM) Printed Part Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Ahmad Tarmizi (2018) Effect Of Thermoplastics Corn Starch Composite Reinforced By Long Treated Pineapple Leaf Fibre On The Mechanical, Physical And Environment Behavior. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Aliatul Syafiqah Nabilah (2018) Improving Waste Cooking Oil Lubricity Properties With Enhancement Of Nanoparticle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Mohamad Hadzir, Mohamad Alif (2018) Environmental Impact Assessment Of Non-Traditional Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Noor, Mohamad Syafiq (2018) A Study On The Conceptual Design Of Rubbish Collector Boat For Sungai Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Rozali, Muhammad Syahir (2018) The Impact Of Engine Performance On Naturally Aspirated : Case Study Fuel Parameter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Suhaimi, Mohamad Izmi Aliff (2018) Biodiesel Production From Jatropha Curcas Oil Via Microwave Irradiation Using Waste Mussel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Nasrim, Muhammad Nasrullah (2018) To Investigate The Friction And Wear Of Transmission Oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Abd Wahab, Muhamad Aizat (2018) Pinless Friction Stir Welding For Weld The Thin Plate SPCC. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Adnan, Mohamad Fahmi Adli (2018) Optimization Parameter Of Flank Tool Wear For AISI 1018 Low Carbon Steel Using Boron Insert In Wet Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin, Abdul Thaqif (2018) Comparison Study On The Effect Of Router Tool Geometrical Features On Machining Performance For Edge Trimming Of CFRP Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asri, Muhammad Ikmal Khazany (2018) A Study On Mechanical, Physical And Environment Properties For Varied Length On Thermoplastics Cornstarch Composite Reinforced By Untreated Pineapple Leaf Fibre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asri, Noor Suhaili (2018) Quality Recognition And Cost Evaluation Based On Activity Based Costing (ABC) For Aluminum Alloy Using CNC Laser Cutting And Water Jet Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azli Lee, Mohamad Fakhrul Fuad (2018) Numerical Study Of Aerodynamic Performance Of Dimple On Commercial Bus (Pioneer Coach Builder). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Muhammad Nazrin (2018) Design And Development Of Modular Body By Air Drag Reduction For Food Truck. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Bonawan, Muhammad Norazam (2018) Design And Fabricate The Autonomous Steam Iron Stand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Muhammad Amir Hafiz (2018) Design And Development Of Protective Headgear In Lessing Head Impact During Concussion For Rugby Games. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Kamal Haslin, Mohd Kamarul Nazreen (2018) Improvement And Analysis Of Cooling System For Motorcycle Jacket By Using Phase Change Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Noor Bakri, Muhamad Fauzi (2018) Study The Indoor Air Quality (IAQ) At Melaka International Bowling Centre (MIBC), Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Pauzi, Marliyana (2018) Investigation On The Effect Of Cognitive Ergonomic Of Final Year Student Workload. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razali, Mohd Adi Hafriz (2018) A Study On The Relationship Between Effect Of Different Tyre Pressure, Weight Load And Fuel Consumption By Using Statistical Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rosedi, Ahmad Aqlan (2018) Dynamic Study Of Coal Ash Based Chloroprene Rubber For Automotive Seal Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Said, Mohamad Rashdan (2018) Design And Analysis Of A Jig Testing For Automotive Coil Spring Static. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sulong, Ahmad Firdaus (2018) Vibration Analysis For Gear Backlash On Spur Gear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusoff, Mohamad Yunus (2018) Numerical Analysis Of Automotive Brake System Subjected To Thermal Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zainel, Siti Nuraishah (2018) Effect Of Sugarcane Fibre On The Morphological And Mechanical Properties Of Thermoplastic Potato Starch. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Mohd Zarawi, Nor Sharmila (2018) Application Of Microwave Energy For Biodiesel Production Using Rubber Seed Oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mokhtar Amat, Muhamad Ariff Hilmi (2018) Development Of Automatic Hazard Light Signal System In Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Nasir, Nurul Najihah (2018) Prediction Of Head Loss In Bore Pipe Using Neural Network Modelling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Shahrum, Mohd Azmer (2018) Study Of Mechanical Properties Of Heat Treated Copper Using Hardness And Tensile Test. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Musa, Mohd Norhakeem (2018) Driving Comfort Studies Through Different Front Coil Spring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Nadzri, Muhammad Asyhraf (2018) The Investigation Of Mechanical Properties Of Four Layer Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ngin, Wei Chuan (2018) Comparing Accuracy,Surface Roughness And Repeatability Study Of Torque Link Aerospace Landing Part On Five-Axis Simultaneous Milling (Linear) And Five-Axis Simultaneous Milling (High Speed) By Using CATIA V5. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nuroddin, Norfaizal (2018) Development And Analysis Of Biodegradable Product From Pineapple Leaf Fibre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Othman, Muhammad Zafri Ariffin (2018) Study Of Combined Load On The Buckling Behaviour Of Cone-Cylinder Transition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

P

Patah, Mohd Pirwansyah (2018) Study Of The Friction And Wear Characteristic For Fully Synthetic Oil Blended With Mineral Base Oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

R

Rahmat, Amirul Danial (2018) Driving Comfort Studies Throught Different Suspension Coil Spring Type : Standard vs Modified Setting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rajendran, Vikeish (2018) Development Of Plastic Bottle String Stripper. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Raman, Pethal (2018) Lean Waste Analysis Using Value Stream Mapping For Productivity Improvement For C/MBR Comp Mid Floor At PHN Industry Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli, Mohamad Norsyahmi (2018) Conversion Of Carburetted Engine To Fuel Injection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rashid, Nur Shazwanie (2018) Development Of New Filament Wire From Sugarcane Bagasse Fibre Reinforced Thermoplastic Composites As Feed Stock For Fused Deposition Modelling (FDM) Using Extrusion Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razak, Noorshahirah (2018) Effect Of Rice Husk Ash On Natural Rubber Compound As Green Filler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Intan Farah Najihah (2018) Design And Fabrication Of Bed Chair With Front Rest For Chronic Patient. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rezduan, Muhammad Nadzir (2018) Design And Analysis Of Rear Wheel System For An Agricultural Vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ridzuan, Muhamad Raimi Razi (2018) Thermal Behavior Of Ventilated Disc Rotor Using Finite Element Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Rodzi, Muhammad Amirun Mukmin (2018) Analysis Of Efficiency Of Different Types Of Fuel For Proton Car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Mohamad Azarul (2018) Numerical Study Of Airflow Performance At Engine Radiator Vent On Commercial Bus (Pioneer Coach Builder). Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

Saad, Mohd Shukur (2018) Product Design And Development Of Automated Handheld Fish Scales Skin Remover. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saffiee, Mimi Syaffiza (2018) Performance Comparison Of Multi Piezo-Based Sensors On Internal Combustion Engine For Condition Monitoring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Said, Izuddin (2018) Product Quality Improvement For SME Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Saliman, Munir Muhamad Muda (2018) Effect Of Addition Of 5% Copper In AL A356 During Cooling Slope Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salman, Rabiatul Adawiyah (2018) Experimental Investigation On Biodegradable Material In Yielding Fertilizer For Home Appliances. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samad, Nur Fadhilah (2018) Manufacturing Selection For Natural Fibre Composite Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sani, Wan Zarinalila (2018) A Study Of Relationship Between Scallop Height And Surface Roughness On 5-Axis CNC Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sasee, Murallitaren (2018) Design And Fabricate Portable Electric Grass Cutter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Senan, Muhammad Hilmi (2018) Analysis Study Of Muscle Fatigue By Using Electromyography (EMG) While Operating Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahurin, Shafarul Nizam (2018) Improving Gas Emission In 4-Stroke Small Engine through Systematic Overhaul Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shegaram, Kaliarasan Chandra (2018) Design And Development Of Automatic Oil Disposal Grease Trap System With Solar Tracker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulaiman, Muhammad Syafiq (2018) Study The Impact Of Torsion Based On The Material Properties For Simultaneous Tyre Wrench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Tai, Xin Yee (2018) Study On Mechanical Properties And Microstructure Behavior Of Aluminium Alloy 6061. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tamim, Muhammad Saiful (2018) Development And Analysis Of Car Safety Belt Alarm System Using Inductive Sensor To Detect Belt Length. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Fei Sian (2018) Integration Of Time Driven Activity Based Costing (TDABC) And Simulation For Decision Making In Assembly Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Jun Hao (2018) Effect Of Spinning Rate And Sintering Temperature Of TiO2 Sol-Gel Via Spin Coating. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tohiran, Nur Amira (2018) Ergonomic Studies For Portable Ablution System By Applying Sequential Equation Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tumijan, Nurfarhana (2018) Design, Optimization And Fabrication Of A 3D Printing Orthopedic Calf Cast. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

U

Usman Duri, Muharnisyam (2018) Study On Thermal Energy Storage Medium In Absorption Refrigeration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

V

Visal, Charlie (2018) Investigation On Corrugation Effects And Growth In High Speed Railway By Using CAE Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wan Ruzzeli, Wan Mohd Amierul (2018) Study Of Mechanical Properties Of Heat Treated Aluminium Alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wen Jia, Lee (2018) Effect Of Driving Posture And Hand Grip For Hand Arm Vibration Syndrome Among Car Drivers. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Wong, Dave Wei Ye (2018) Design And Develop A Damper To Reduce Vibration In Milling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Woo, Wan Nee (2018) Optimization Of Injection Molding Parameters For 80:20 Virgin-Regrind Blended ABS Plastic Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zahari, Muhammad Izzul (2018) Performance Investigation Of Sprocket And Chain Using Finite Element Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zahrinnuddin, Mohammad Zaim Haikal (2018) Investigation On Rheology Properties Of Natural Fibre Composite For Fused Deposition Modeling Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zaidi, Noorfazira (2018) Design For Sustainability Of Composite Automotive Anti Roll Bar Using Life Cycle Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal, Muhammad Izzat (2018) Design And Analysis For Development Of Natural Based Food Packaging Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainudin, Muhammad Hariz (2018) Development Of Low-Cost Magnetic Motor Fan For Individual Usage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Ahmad Firdaus (2018) To Investigate The Friction And Wear Of Recycle Engine Oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Ira Umira (2018) Design And Analysis Of Anti-Roll Bar Using Computer Aided Engineering Tools. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Muhammad Zairul Naim (2018) Design And Develop The Adjustable Boring Head For Conventional Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Nurul Haifa (2018) Comparative Analysis In Technology And Costing Between Hybrid And Electric Vehicle Choices In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zamree, Ahmad Zulfadhli (2018) Effect Of Natural Wax On The Mechanical And Water Resistance Properties Of Thermoplastic Cassava Starch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkafli, Muhammad Rahdi (2018) Optimization Parameter Of Boron Tool Wear With Surface Texture For AISI 1018 Low Carbon Steel In Wet Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkefli, Nurul Nadia Nabila (2018) Design And Simulate Water Vapor Flow In Heat Exchanger By Varying Diameter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Muhammad Fuad Hafidz (2018) Development Of A New Spread Sheet System For Inventory Management. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Nurul Ainhidayah (2018) Investigation Of Buckling Behaviour Of Axially Compressed Cyclinder With Uneven Length Having Triangular Waves. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)