Items where Division is "Library > Final Year Project > FKP" and Year is 2015

A

Ab Halim, Mohamad Nazim (2015) Implementation framework of manufacturing sustainability. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Muhammad Alif (2015) Electroless quaternary Ni-Co-Cu-P deposition on Fe substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Halim, Mohamad Kamarul Nizam (2015) Modelling of thin wall machining with tabular helix end mill. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Nur Awaliah (2015) Assessing a system reliability: a case study in arm rear axle assembly. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Razakuan (2015) Design of laboratory information and management system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rashid, Muhammad Hazim (2015) Automating the production of the automotive retainer using the rotary indexing mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Mohd Dzahir (2015) Cutting technology and sintering jig development for manufacturing of hollow structure mat. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Jalil, Muhammad Asyraf (2015) Evaluation and sensitivity analysis for selecting the best design of automotive fender using analytic hierarchy process (AHP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Muhaimin, Mohd Yusri (2015) Quality improvement through lean six sigma approach at wooden picture frame moulding company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Iqmal Aizad (2015) Development of data acquisition platform for retrieving ergonomic parameter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Mohd Helmi (2015) Development of portable water hammer accumulator for domestic water system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Syazwan (2015) Application of axiomatic design and additive manufacturing : a case study of a door knob. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nor Fazliyana (2015) Design and analysis of the optimum gate size for multi-cavity plastic name card injection mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nordianaaida (2015) Convolution design profile toward kansei engineering. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adnan, Muhamad Nur Hadi (2015) Machining performance of titanium alloy Ti-6Al-4V in milling operation using CVD carbide insert. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adnan, Muhammad Aidil (2015) Manufacturing complexity characterization: case study at Micro-Nano Precision Sdn. Bhd. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhamad Khaizaki (2015) Reaction mechanism of electroless quaternary nickel alloy deposition on fe substrate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Ismail (2015) Defect Detection On The Metal Surface By Using Machine Vision Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Fashli Afif, Abdul Hamid (2015) Electrical Discharge Machining Of AISI 304 Stainless Steel Using Mixture Of Deionized Water And Carbon Nanofiber With Surfactant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rozi, Shahrain (2015) Surface integrity of AISI D2 when machined with plasma assisted machining. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Termizi, Nadiah (2015) Design a dustpan and analyze the optimum injection molding parameters for a gate location. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ali Saeedan, Ahmed Saeed (2015) A study of pre-travel variation of coordinate measuring machine with different stylus configurations. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Aizad (2015) Study on the prediction of cutting tool lifespan towards casting processed product. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Alibediri, Nurazreen (2015) Formation of self-organized ZrO2 nanotubes by electrochemical process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amin, Abdullah Hapipi (2015) Dimensional Accuracy Of The Platinum Faro Arm For Reverse Engineering Products Using Fused Deposition Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Fatin Alia (2015) Optimization of hybrid microgenerator based on electromagnetic and piezelectric. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Anuar, Mohd Syarizal (2015) Effect of different coating layer of alkali niobate (knn) thin film through sol-gel technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arzmi, Muhammad Syafiq (2015) Design and analysis of the optimum gate size for single cavity plastic name card holder injection mold. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhar, Anis Afuza (2015) Investigate surface roughness of aluminium alloy 2024 under wet and dry conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Norhashima (2015) Assessing a system reliability: a case study in manufacturing company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Chong, Jia Ming (2015) Optimizing operator cycle time in a semiconductor company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

E

Ehsan, Abu Bakar (2015) Effect Of Surfactant On EDM Of Low Conductivity Reaction-Bonded Silicon Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ezuddin, Muhammad Harith (2015) Study of corrosion resistance and wear behavior of sol gel coating on AA7075. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

F

Foo, Lin Hui (2015) Effect of coating thickness on roof top thermal performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

G

Ganesan, Hema Nanthini (2015) Simulation of cutting force during high speed end milling of inconel 718. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Goh, Chia Min (2015) Application of integrated analytic hierarchy process (ahp) and technique of order preference by similarity to ideal solution (topsis) in material selection for automotive fender design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Goh, Chun Hsien (2015) Effect of gelcoat thickness on laminate composite structure and strength. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Goh, Jee Boon (2015) Design & development of regenerative system for cooling tower system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

H

Hasbullah, Muhammad Haziq (2015) Design of motion strategy for mobile robot in reconfigurable manufacturing system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasbullah, Nor Wahida (2015) Design and analysis of aerial bundle cable suspension by using finite element analysis at Jati Beringin Sdn Bhd. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hee, Wee Kiat (2015) Design of automatic metal strips pallet stacker for slitting machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ho, Kam Yuen (2015) Optimization of FDM parameters with Taguchi method for production of flexible ABS part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Huong, Yu Chung (2015) Design of remote system configuration framework in manufacturing environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

I

Ibrahim, Iffah Nafisah (2015) Human analysis and ergonomics of an electric bicycle seating posture. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Salwa (2015) Design optimization of fryer basket using finite element analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ithnin, Nur Azura (2015) Carbon nanotube growth from solution processed cobalt catalyst. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

J

Jiga, Iviana (2015) Implementation of design for manufacture and assembly (DFMA) and analytical hierarchy process (AHP) in optimizing conceptual design of hand tool trolley. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jumahat, Muhammad Firdaus (2015) Effect of mixing ratio of polypropylene/ polyethylene and paraffin wax on its mechanical properties using internal batch mixer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Junaidi, Nurul Hidayah (2015) Customer-product attribute identification using correlation relationship for efficient product customization development. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

K

Kamarudin, Taty Nahdatul Faiqah (2015) Study the attributes of products and processes for automotive product development : exterior and interior parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruzaman, Mohd Farhaan (2015) Development of flat bar gauge using total design approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairul, Khairil Azwa (2015) Investigation of mechanical and morphological properties of spent bleach earth (SBE) reinforced glass waste composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Lai, Wei Wein (2015) Motion simulation analysis of portable accumulator for domestic water system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lay, Yan Ten (2015) Effect of different impactor nose on laminated composite structure under quasi static loading. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Wee Pin (2015) Application of work study to reduce operations time at glove industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Yong Seng (2015) Modeling on effect of drill geometry for bone drilling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Say Li (2015) Design and analysis of a mobile robot mechanism for maintenance works in manufacturing environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Xian Kuang Benjamin (2015) Improvement Of The Snap Lock Pin Assembly Machine At Prym Consumer Malaysia Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Yen Ching (2015) Development and analysis of new intraply for glass fiber and kenaf fiber in composite structure applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loo, Heoy Shin (2015) Bone scaffold design selection by using analytical hierarchy process (AHP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Luming, Julia (2015) The application of c- shaped curve in air filter design: a case of performance car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M

Makong, Najil (2015) Design and fabrication of welding jigs and fixtures for Fkp lab. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Noor, Noraina Alia (2015) A simulation-based approach to decision support for lean-practitioners. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Zin, Nurul Halwanie (2015) Redesign the toilet seat by using ergonomic approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Maulud, Nuuril Fahmi (2015) Effect of drilling parameters on the surface integrity of aluminium alloy LM6 using response surface method (RSM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Khirom, Aini Rahayu (2015) Structural characterization of hgse2 thin films by electrochemical route. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Zahir, Saiful Azhan (2015) Wear behavior and corrosion resistance of nickel coatings electrodeposited on aluminum alloy 7075 substrate via various current density. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Zula, Nur Emelia Natasha (2015) Investigating the ergonomics body posture on repetitive and heavy lifting activities of the workers in aerospace industry’s warehouse. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Fahmi, Mohmad Bohari (2015) Effect Of Sintering Rate On Glass Waste Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Farik, Siti Farizatul Akma (2015) Research On Concept Idea Of Semperit Dahlia Machine Design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Fikri, Mohamad Jaya (2015) Production Line System Enhance Based On Modeling And Simulation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Kasim, Khairul Anwar Adhwa (2015) Manufacturing, assembly and trial of core and cavity plastic injection mould for two-plate family mould testing specimens. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Noor, Siti Amirah (2015) Productivity enhancement by Overall Equipment Effectiveness (OEE) improvement in Harberdashery industry: a case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Effendi, Salmi (2015) Fabrication and characterization of redox-based electrochemical capacitors. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Fauzi, Muhamad Fakhruddin (2015) An emotional design of product using kansei engineering : mathematical approach towards design profile. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad Tahir, Hadi Afiq (2015) Effect of cutting parameters in milling titanium alloy ti-6al-4v using pvd carbide insert. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Azam, Siti Zulaiha (2015) The use of snakehead fish behavior in round nose bullet design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ghazali, Athirah (2015) A case study of causes of manufacturing losses in palm oil mill. Project Report. Universiti Teknikal Malaysia Malaysia, Melaka, Malaysia. (Submitted)

Mohd Hashim, Syazwani (2015) A methodology to develop ontology of additive manufacturing using formal attributes specification template (FAST). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Jamil, Jamilah (2015) Quality improvement using factorial design: a case study in manufacturing company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Khairol Anuar, Nur Fathana (2015) Design and analysis the optimum sprue size for single cavity plastic name card holder plastic injection molding. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nawi, Mawaddah (2015) Design of safety system for comau articulated robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Noh, Muhammad Izzuddin (2015) Tool life of high speed steel hardfaced with tool steel deposited by GMAW. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nor, Noorhanani (2015) Investigation the effectiveness of EDM performance and tool roughness on surface finish of inconel 718. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Norddin, Muhamad Hazrul (2015) A study on the sustainability programs and practices, legislative compliance and the benefits of production losses elimination. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Rafiq, Fara Nadia (2015) Design of pneumatic gripper for comau articulated robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Razali, Nur Ramiza (2015) Automatic ablution machine based on image processing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Salleh, Shahrinna (2015) Improvement of overall equipment effectiveness in a haberdashery manufacturing company for productivity enhancement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sukarno, Aina (2015) Analysis on human-robot collaboration through affective engineering. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zulkeflle, Siti Nurathirah (2015) A study on hand press grip force for push activity in lay up process at aerospace industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Arshad, Nur Nadia (2015) Synthesis of TiO2 nanotubes via anodic oxidation in carbonated bath. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Amir, Mohd Rohzaini (2015) The Development Of Slitting Sheet Metal Machine For Wire Mesh Using Total Design Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Rafie Empari, Nurul Nadia (2015) Study on wear rate of TiAIN ball nose during milling inconel 718 under flooded lubrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mustafa, Siti Sara (2015) Effect of cutting parameter on surface roughness titanium alloy (Ti-6AI-4V) with drilling process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

N

Nadzeri, Muhammad Amirul Fahmi (2015) Tool wear of carbide cutting tools when machining aluminum alloy 2024 under dry and wet condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nik Mohammad, Nik Muhamad Arif (2015) Ergonomics and flexible shoe insole. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Noh, Ahmad Aizat (2015) Glass bottle defect detection by using image processing technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nur Asila, Esa (2015) Mechanical Properties Of Acrylonitrile -Butadiene Styrene-(ABS) Filled With Cockle Shell Powder(CSP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Rashidah, Ishak (2015) Improvement Of The Ultrasonic Joining Process At Prym Consumer (M). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur'Adinlah, Norman (2015) Reducing Cycle Time To Improve Productivity In Lay-Up Process At Aerospace Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Khaleeda, Ozman (2015) Analysis Of Material Handling For Automotive Assembly Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Omar, Khairul Akma (2015) Study on physical form of consumer products in product designing towards brand recognition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ong, Fui Yee (2015) Development Of A Concept For Physical Reconfigurable Conveyor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi, Chin Pow (2015) Head-up display (HUD) interface design for automotive application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Osman, Nor Suriyanti (2015) Analysis of pneumatic valve control system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

R

Ramli, Mohd Faiz (2015) Effect of manufacturing sustainability on manufacturing performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rohizat, Nursyafika (2015) Influence of suspension preparation condition and medium microstructure and phase of electrophoretic deposited poly (vinylidene fluoride) films. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Romlee, Wan Fatin Athirah (2015) System identification of XY table ballscrew drive system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Mohamad Muzammir (2015) Proposing a single minute exchange of dies in textile manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S

Sa'ad, Nur Syafini (2015) Formation of iron oxide nanowires by using thermal oxidation of iron. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saari, Saadatunur (2015) The effects of cutting parameters on dimensional accuracy in wet and dry turning. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Safian, Mohd Azizul Hikmi (2015) Effect of praseodymium (III) oxide (Pr2O3) doped bismuth sodium titanate-barium titanate (BNT-BT) via solid state reaction. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sam, Mei Lee (2015) Preventive Maintenance Application Of Machineries At Apparel Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sapari, Nur Fashiha (2015) Carbon filled glass ceramic: from waste to wealth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Seman, Mohd Ikhwanul Hayat (2015) Effect of resin ratio and baking temperature to the properties of biodegradable resin bonded sand casting mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sharifah Zulaikha, Syed Muhammad Nurdin (2015) Modeling Part Supply System For Automotive Assembly Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharum, Aisyah (2015) Tailor orbital welding on aluminium alloy 6063. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shim, Fiona May Fa (2015) Fabrication and mechanical analysis of spent tea leaf materials for sound absorption. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sim, Voon Yee (2015) Effect of substrate on the microstructure and morphology of Ag-TiO2 sol gel coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sumaidy, Eliyana Sari (2015) Ergonomic design approach to enhance the labor productivity in manufacturing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

T

Tajudin, Muhammad Nasirudin (2015) PID and cascade controller for tracking performance of XY table ball screw drive system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Talib, Nurazliana (2015) Quality improvement through lean practice. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Huay Kean (2015) Effect of repetitive rework on dissimilar austenitic stainless steel pipes by using GMAW orbital welding. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Jared Sin Sian (2015) Parameter optimization for machining recycled plastic. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Mei Yi (2015) Investigation of optimum parameters of FDM rapid tooling pattern for sand casting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ting, Doris Hui Chii (2015) Assessment of storage and retrieval system at apparel industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

W

W Abdul Rahman, Wan Fakhrurrazi (2015) Investigation on viable knowledge transfer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Abdullah Shani, Wan Nur Fateehah (2015) Study on superhydrophobic surface of green magnetic sheet from durian shell. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Jusoh, Wan Farhan (2015) Surface roughness measurement by using image processing based techniques. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Muhammad, Wan Munzareen (2015) Characterization of calcium phosphate for bone filler. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Roslan, Wan Nurul Effah (2015) Application of graph-based method for manufacturing layout evaluation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Zulkifli, Wan Amirul Shafiz (2015) Effect of mixed and non-mixed solvent on the coating properties of sol gel TiO2 thin films. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Carrie Siaw Shien (2015) Planned yield, time yield and simple yield methods to calculate oee metric in semiconductor company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, John Huang Ung (2015) Development of a database to support sustainable packaging design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Kuan Lih (2015) Using visual management tool to error proof WIP lots withdrawal in semiconductor manufacturer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Kylie Muh Shin (2015) Effect of catalyst and heat treatment temperature on the coating properties of sol-gel TiO2 thin films. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Y

Yaacob, Nur Amirah (2015) Effect of voltage's pause width on microstructure, crystallinity and electrochemical performance of electrophoretic deposited activated carbon/ carbon nanotubes films. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yaakob, Nurul Afizan (2015) Effect of cutting parameter on roughness during surface grinding of inconel 718. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yasin, Nurhafyzah (2015) PID and nonlinear PID controller for tracking performance of XY table ball screw drive system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yee, Jia Li (2015) Developing graphical user interface in semiconductor factory for operator efficiency improvement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Z

Zaidi, Nurul Ermiera (2015) Investigation of surface integrity when machining FC300 gray cast iron with uncoated carbide flat end mill. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainal, Nurlishafiqa (2015) Research elements investigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zaini, Bazli Faiq (2015) Evaluating risk factors in manual material handling tasks (lifting and lowering). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Fatin Aida Aqila (2015) The human analysis and ergonomics for the seat design of electric buggy (driver seat). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zukfflay, Nur Atika (2015) Study the attributes of products and processes for automotive product development: case study of automotive car’s engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkefli, Hartini (2015) The profile design (image) towards customer emotional responses. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Muhammad Winal Zikril (2015) Design and development of camera guided turret system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Nurul Hidayah (2015) Design of PID and nonlinear PID controller for tracking performance of XY table ball screw drive system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulnizam, Nurul Zafirah (2015) Effect of HCL concentration, anodization voltage and time on microstructure, phase and photocatalysis activity of titanium dioxide film. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zuraida, Hamzah (2015) Effect of annealing temperature on electroless ternary nickel alloy properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)