Items where Division is "Library > Final Year Project > FTKMP" and Year is 2019

A

Ab Hamid, Ahmad Akram (2019) Improvement Aerodynamic Design For C-Segment Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Wahab, Muhammad Tarmizi (2019) Design And Fabrication Of Oil-Water Separation System With Hydrophobic Coating Wire Mesh Filter For Grease Trap. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Azis, Muhammad Taufiq (2019) A Project On Ball And Concave Jig Attachment For Lathe. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Latif, Muhammad Anas (2019) Design And Development Of Injection Mold For Plastic Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Nor Nabilah (2019) Design And Development Of Automated Wire Cutter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rashid, Mohd Ariff (2019) Developement Of Rice Treatment Method Towards Ankle Sprain Syndrome. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Samad, Mohd Adha (2019) Design And Improvement Emergency Brake System For Motorcycle Under 150cc. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Amin, Muhammad Harith Aizad (2019) Development Of Waste Heat Recovery Unit For Passenger Car By Using Thermoelecric Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hakim, Nur Raihana (2019) Improvement Of Production Line Flexibility Through Rapid Changeover Via Time Reduction Of Internal Activities. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Amiera Husna (2019) Conversion Of Jatropha Curcas Oil To Biodiesel Using Heterogeneous Catalyst Via Microwave Irradiation Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Harith Hilman (2019) Thermal And Mechanical Properties Of Thermoplastic Cassava Starch/Beeswax Reinforced With Cogon Grass Fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Muhammad Aminudden (2019) Design And Fabrication Three-Wheels Electrical Balancing Scooter For Disable Person. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Nurul Athirah (2019) Development Of Machine Element Of Teaching Aid For Secondary School. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Kadir, Mohd Hakim Naqiuddin (2019) Development Of Third Brake Light And Signal System For Motorcycle Helmet. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Latiff, Syafiq (2019) Effect Of Micro Drillng Parameters On Thrust Force In Micro Drilling Of CFRP Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Najib, Norhazwani (2019) Design New Mechanism Of Safety Triangle For Motorcycle Under 150 Cc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Amirul Hazim (2019) Mechanical And Thermal Properties Of Thermoplastic Cassava Starch/Beeswax Reinforced With Sugarcane Bagasse Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rasid, Mohd Alif Ashraf (2019) An Investigation Of Car Cabin Temperature Reduction Using Different Number Of Solar Car Ventilator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Afiq (2019) To Study The Heat Insulation From Engine Toward Bus Interior. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Wahab, Muhammad Zikri Hakimi (2019) Development Of In-Cabin Intelligent Safety System Against Carbon Monoxide. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Norinni (2019) Investigation Of The Buckling Behaviour Of Axially Compressed Cone With Dimple Imperfection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afandi, Muhammad Akif Irfan (2019) Experimentation Of Mode Shape Curvature Algorithm Using Accelerometer For Damage Detection In Aluminium 6061. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Siti Fikriah (2019) The Study Of Flank Wear Using Coated Latuma (ALTiN) Boron Steel (22MNB5) On Aluminium (AA6061). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ali, Afif Danial (2019) Design & Development Of Voice Command Vehicle Turn Signal System For Urban Car Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aminallah, Muhammad Mufqi (2019) Study Of Fiber Loading Effect On Thermal And Rheological Properties Of Bio Composite Fused Filament Fabrication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arom Karoman, Muhammad Fadzil (2019) Cutting Force Measurement Of Natural Fiber Reinforced Polymer Matrix Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arumugam, Solament (2019) Investigation Of Voltage Of Strained Rubber Sheet Using Strain Gauge-Voltage Measurement System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Attaman, Muhamad Amirul Afif (2019) Design And Analysis Of Hydrophobic Oil Skimmer For Grease Trap System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Muhammad Amin (2019) Design And Development Of A Portable Peanut Skin Remover Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Nurniqmah (2019) Minimization Of Unnecessary Inventory By Using The Application Of Pulling System In Manufacturing Industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Muhamad Hillmi Nadim (2019) Sound And Vibration Analysis Of Portable Air-Conditioning System Using Peltier Module As Power Source. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Muhammad Kamal (2019) Effect Of Fused Filament Fabrication Process Variables On Mechanical Behavior Of Flax. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Baba, Muhammad Syahzlan Faizal (2019) Design Evaluation Of Wiper System For Urban Concept Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badek Ruzaman, Badiu Nasrullah (2019) Evaluation Of Electrical Conductivity(EC) For Fertilzer Solution Of Venturi Fertilizer System (VFS) Using Design Of Experiment(DOT) Analysis For Agriculture Fertigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahari, Faqrul Izzat (2019) An Investigation Of Bearing Faults Using Vibration Meter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bakar, Amar Zikri (2019) Microwave Effect On Biodiesel Production From Hevea Brasiliensis Using Anadara Granosa Shell. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Borhan, Muhammad Sauffi (2019) Research Of Magnetic Shock Absorber With Using Spring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Che Hassim, Muhammad Dzulhelmy Che Hassim (2019) Design Of Experiment (DOE) Based Approach In Optimizing Finishing Parameters Of CNC Machining Toward Surface Roughness. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Razak, Amir Asyraaf (2019) A Conceptual Design Of Automotive Passenger Compartment Cooling System By Using Solar Power. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheng, Hong Leng (2019) Design And Finite Element Analysis Of Fire Smoke Damper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chieng, Jun Yuan (2019) Design And Fabricate An Efficient Rotating System For Mini Hydro Power Turbine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chung, See Ern (2019) Investigation Of Curling Effect Of 3D-Printed ABS Structure On Different Print Bed Temperatures And Surfaces. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Coomerasamy, Punethen (2019) Design Of Cooling System For TEG In Generating Electrical Energy From Waste Heat At Night Market. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

Daniel, Jonathan Dave (2019) Design And Development Of Automated Front Lighting System With Sensor Integrated For Urban Car Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Daud, Muhammad Alif Farhan (2019) The Study Of Super Hydrophobic Coating Based On Coconut Oil For Piping Surfaces In Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

Eddy Barkley Fatani, Adam Daniel (2019) Experimental Study On Thermal Effect Using Sunshades In Vehicle Passenger Compartment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

F

Fadli Yusof, Amirul Ridzuan (2019) Design And Fabricate Vehicle Trainer Kit For Educational Purpose (Body Structure) With Aide Of Computer Aided Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fauzi, Mohammad Fakhru Razzi (2019) Performance Of A Cloth Drying Cabinet Using Utilizing Waste Heat From A Split Type Air Conditioner Condenser. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

G

Ganapathy, Vikram Varma (2019) Design And Fabricate Roller For Sticker On Car Windscreen To Improve Blind Spot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hambali, Nurul Ain (2019) Structure Analysis In Aluminium 6061 Using Finite Element Analysis For Damage Detection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamidon Zain, Mohd Hafizzuddin (2019) Design And Development Of Dead Man’s Safety Device For Urban Concept Car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamsan, Mohamad Fazly (2019) Design, Optimise And Fabricate A New Modular Interchangeable Upper Part Of Gun Mounting Platform For VAMTAC 4x4 Weapon Platform Vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamzah, Anisah Atirah (2019) Applied Anthropometric Study On Light Vehicle Design And Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanif, Haziq Haiqal (2019) Improvement Of Vehicular Heatstroke Sensor System For Children. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Haron, Mohd Noor Hafiz (2019) Air Flow Modelling In A Server Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasan, Muhammad Ammar Kamil (2019) Effect Of Coefficient Drag Towards Shark Fin Antenna And Vortex Generator With New Concept Design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

I

Ibrahim, Nurul Atikah (2019) Design And Development An Integrated Inspection Gauge For Motorcycle Clutch Pressure Plate. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ilyas, Hafizol Haqie (2019) Waterjet Anti-Sink Product Filter For Tiny Part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ishak, Muhammad Aqiuddin (2019) Investigation On Fatigue Properties Of Natural Composite Containing Coconut Coir Using Doe Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Mohd Ismady (2019) A Design Of Experiment Approach To Predict Product And Process Parameters For Portable Ablution System Improvement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Izamuddin, Nur Rohaiza (2019) Investigation On Mechanical, Physical And Environment Properties For Hybrid Method Of Fabrication On Cornstarch Composites Reinforced By Short Pineapple Leaf Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Jaafar, Muhd Solehuddin (2019) Design Optimization And Fabricate Of Hand Free Leg Brace To Improve Conventional Crutches. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jaimi, Elmy Ridzmie (2019) Design And Development Of Rear Light System With Operation Indicator For Urban Car Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaluddin, Nurul Syifaa’ (2019) Ergonomic Risk Assessment On Laboratory Chair User. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamil, Muhammad Aliff (2019) A Study On Material Of Book Rack Fabricated From Biocomposite Kenaf Fiber-Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jenat, Natali Laura (2019) Study Mode Shape Curvature in Aluminum 6061 Using Cubic Polynomial Regression Method Based on Simulation Data. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Joily, Sherilyn (2019) Productivity Improvement Study Using Lean Techniques At Manufacturing Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

K

Kaini, Muhamad Syahir Syazwan (2019) Development Of HVAC Virtual Laboratory (Hv-Lab); Recirculation Air Conditioning System Training Unit Using MATLAB/Simulink Software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Karakaran, Rubasakti (2019) Enhancement Of Productivity Using Overall Equipment Effectiveness (OEE) Through Performance Improvement In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasim, Muhamad Luthfy (2019) Effect Of Fiber Loading Of Biocomposite Fused Filament Fabrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kerk, Zi Ling (2019) An Experimental Investigation On The Dimensional Accuracy Of Melaka Historical Artifact Fabricated Using Additive Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khawari, Ikhwan Syamim (2019) Design And Development Of Rig And Driving Simulator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kok, Hoi Ern (2019) Characterization Of Adhesive Layer Of Laminating Pressed Flexible Printed Circuit Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kresnin, Shamini (2019) Investigation Of Rice Husk Content To The Mechanical Properties Of Natural Composite Using Doe Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Krishna Moorthy, Sathya Sri (2019) Design And Fabrication Of Composite Water Tank Added With Fly Ash For Residential Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lee, Hui Kean (2019) Lean Six Sigma For Process Improvement Case Study At A Manufacturing Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Low, Kah Lai (2019) An Experimental Investigation On The Surface Finish Of Melaka Historical Artifact Fabricated Using Additive Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

M. Azman, Akalili Asilah (2019) Investigation On The Characteristic Of Thermoplastic Cornstarch Composite Reinforced Short Pineapple Leaf Fiber (PALF) By Using Mixer Method Of Preparation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadi, Muhammad Mukhlis Aiman (2019) Design And Fabrication Of 3 Wheels Stand Up Electric Scooter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Maharun, Muhammad Adib (2019) A New Design Optimization Of Lightweight Lower Control Arm For B-Segment Passenger Car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Manogran, Devaki (2019) Characterization Of Acrlonitrile Butadiene Styrene – Hexagonal Boron Nitride Composite For 3D Printing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Manveeran, Lingeshwara (2019) Study Of Compression Strength Of Glass Fiber Reinforcement With Concrete. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhammad Nasiruddin (2019) Waste Engine Oil Influence On Viscosity And Rheology Properties Of Asphalt Binder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan Supawi, Nurul Amiza (2019) Investigation On Incomplete Fill Problem Of Quad Flat Package In Semiconductor Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Nor, Nurul Afifah (2019) Smart Multifunctional Padlock Through RFID For Bike Or Others. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Megat Dazuti, Megat Adam (2019) Design And Development Of A Kinetic Energy Harvesting System For Speed Bump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mhd Said, Shahidatul Aida (2019) Production Improvement Of A Food Manufacturing Process Through Lean Six Sigma Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Misran, Amirul Siddiq (2019) Vertical Takeoff And Landing (VTOL) Aircraft Concept Design In Supporting Medical Supply Delivery To Obsolete Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mletchumanan, Dharshani (2019) Investigation Of Coconut Coir Content To The Mechanical Properties Of Natural Fibre Reinforced Composite Based Doe Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Ali, Umi Syazana (2019) Digital Reproduction Of Malay Relic Components Obtained From Non-Contact Laser-Based Reverse Engineering System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Daud, Alif Aiman (2019) A New Design Concept Of Lightweight Knuckle For B-Segment Passenger Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fodzi, Nurul’Ain Haniyun (2019) Environmental And Physical Properties Of Thermoplastic Cassava Starch Beeswax Reinforced With Sugarcane Bagasse Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Zoefry, Mohamed Awis Qirani (2019) Ultra Lightweight 3D Printed Immobilization Cast For Bone Fracture Treatment In Orthopedic. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad Yusoff, Muhammad Kamal (2019) Optimization Of Spaceframe Chassis Of Shell Eco-Marathon Challenge Urban Car Using Shape Optimization Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ali, Muhammad Haris Izzuddin (2019) Bio-Degradable Grease Formulation Using Fresh Palm Oil As Precursor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Apandi, Nur Shasha Fatihah (2019) Effect Of Single Self Contained Dual Vacuum Clamping On Acrylics End Milling Performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Eza, Muhammad Najib (2019) Addition Of Lithium Hydroxystereate Into Used Cooking Palm Oil As Bio-Degradable Grease Formulation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hamdan, Muhammad Hafiz Hamizi (2019) Development Of Teaching Aid Device To Enhance Technologist Understanding On The Second Law Of Thermodynamics Using Pugh's Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Iqbal Dhilbir, Muhammad Firdaus (2019) Smart LPG Cylinder Monitoring System For Consumer Use. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Jamal, Muhammad Hafiz (2019) The Study On The Effect Of Side Mirror Position To The Motorcycle View And Blind Spot Area. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Johaidi, Muhammad Jahir Haziq (2019) Design And Fabrication The Electric Mini Scooter Folding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khusairi, Muhammad Luqman (2019) Optimization Of Recycle Water Jet Sand Moulding Composition For Sand Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Maraie, Mohamad Hadihafizul (2019) Application Of Total Productive Maintenance (TPM) To Minimizing Quality Problem In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nayawi, Mohamad Azril (2019) Design And Development Of Tyre Emergency Supporter For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor, Muhammad Fikri (2019) Study Of Physical Properties Of Indoor Air Quality At University Technical Malaysia Malacca Library. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rozlan, Nur Hidayah (2019) Design And Development Of A Quality Inspection Gauge For Checking A Motorcycle Piston. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saad, Muhammad Iqbal (2019) Design And Fabricate Wheelchair Lift Control System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sabri, Mohamad Nur Azmie (2019) Analysis Of Energy Consumption In Air Conditioning System At Technology Campus UTeM, Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Safeai, Shahrul Affifudin (2019) Design And Development Jig And Fixture For Waterjet Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Salleh, Nur Syahirah (2019) A Design And Fabrication Of Motorcycle Jack Lifter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sharif, Muhamad Adzhar (2019) Design And Analysis Of Hydraulic Power Steering System For Steering Test Rig. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shariff, Abdul Qaiyum (2019) Performance Analysis Of Personal Air-Conditioning System Using Evapolar As Heat Waste Management. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sha’ari, Muhammad Aizat (2019) Gravitational Effect On Water Flow Of Venturi Fertilizer System (VFS) For Agriculture Fertigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zaini, Mohammad Noh Faiz (2019) A Study On Vibration Behavior On Vertical Washing Machine Via Vibration Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mokti, Nur Zaakhir (2019) Effect Of Thermoplastics Cornstarch Composite Blend With Agar On Mechanical, Physical And Environment Behavior. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad, Hafiy (2019) Digital Image Correlation On Adhesive Used In Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Raus, Nur Liana Anira (2019) Characterization On The Natural Source Properties For Digital Printing Ink From Waste Cooking Oil Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Murad, Nasrul Haziq (2019) The Study Of Flank Wear Using Coated Aluminium Chromium Nitride (AlCrN) Boron Steel 22MNB5 On Aluminium AA6061. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa, Amirul Izwan (2019) A Study On New Material Of Car Door Panel Fabricated From Biocomposite Kenaf Fiber-Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Nassiruddin, Muhammad Amirul Adli (2019) Design And Development Of An Integrated Quality Inspection Gauge For Width Slot Spur Gear. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Rui Ying (2019) A Study On Selective Laser Sintering Behaviour And Processing Of Polymer Powder Mixtures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Siew Man (2019) Characterization And Gravimetric Analysis Of Exposure From Selective Laser Sintering (SLS) PA12 Nylon Powder Handling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azman, Ahmad Hazim (2019) Analysis Design Of Vehicle For Occupant Packaging. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Halim, Aida Syahirah (2019) Study On Mode Shape Curvature In Aluminum 6061 Using Cubic Polynomial Regression Method Based On Experimental Data. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norazam, Nur Fatin Diyanah (2019) Design And Development Of An Integrated Quality Inspection Gauge For NT40-0Z25-70 Milling Arbor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordin, Muhammad Fahmi (2019) Experimental Study Of The Air Conditioning Ducting Of The Bus For Optimum Cooling Performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norhisham, Muhammad 'Asri (2019) Study To Improve Product Development Of River Trash Collector System By Applying Design Of Experiment Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Ong, Thian Chye (2019) Design And Fabricate The Fire Prevention System Module Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Wei Lin (2019) Using Time Study To Improve Productivity Of Furniture Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ooi, Qi Xiang (2019) The Investigation Of Aerosol And Nanoparticles Emission From Selective Laser Sintering (SLS) 3D Printer Process Using Recycle And Virgin Powder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Ahmad Faiz Hambali (2019) A New Design Concept Of Lightweight Rear Axle For B-Segment Passenger Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

P

Po, Dolly Jim Ming (2019) Investigation Of The Length Over Diameter Ratio Of Tandem Pipe By Computational Fluid Dynamics Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

R Mohamad Faudzi, Raja Mohamad Fareeq (2019) Environmental And Physical Properties Of Thermoplastic Cassava StarchBeeswax Reinforced With Cogon Grass Fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rajah, Sasitharan (2019) Design And Construction Of Organic Food Waste-Fertilizer Conversion System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ravintheran, Suhanthan (2019) A Study On Kansei Engineering On Product Development Using AHP Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ridzwan, Muhammad Fazihan (2019) To Design A Model Of An Open And Underground Rain Water Harvesting System Using Recycled Material And To Study Its Benefits For Domestic Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosdin, Muhammad Rozhan (2019) Design And Fabrication Of Three-Wheel Transportation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosland, Mohd Nazreen Shahrin (2019) Tribology Analysis Of Polyol As Lubricant Additive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rossman, Mikhail (2019) Development Of Waste Heat Recovery Unit For Light Weight (Motorcycle) By Using Thermoelectric Generator (TEG). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rozali, Muhammad Asyraf (2019) A Study On New Material Of Storage Table Fabricate From Bio Composite (Coconut Fiber) Based. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S

Saharuddin, Nurul Syaza Izzaty (2019) A Study On Mechanical, Physical, And Environment Properties On Thermoplastics Cornstarch Composite Reinforced By Untreated Pineapple Leaf Fibre Using Hybrid Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sahimi, Nur Amirah Fasihah (2019) Optimization Of Laser Jet Machining Parameter On Composite Using Taguchi. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saupi, Siti Nurmariah (2019) A Study On Extrusion Process Of FLD-25 3D Filament Machine And Optimization Of Temperature Parameter For Filament Production. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sazali, Amir Hafiz (2019) Investigation Of The Buckling Behaviour Of Cone-Cylinder Transition With Dimple Imperfection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Selvam, Aravind Raj. (2019) Flow Analysis Of Cabinet Fertigation System Using CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaharani, Muhamad Afiq (2019) Eco Jute - Investigation Of An Optimal Bico Fiber And Jute Blend Composition For HVAC (Duct Liner). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsudin, Muhammad Amirul (2019) Interior Package Design and Development of Energy Efficient Shell Eco-Marathon Urban Car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamsul Azhar, Aiman Syukri (2019) Study Of Spark Plugs Performance With Different Electrode Diameters And Types Of Electrode In Spark Ignition Engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shariff, Anis Sabirah (2019) The Study Of Flank Wear Using Uncoated Boron Steel (22MnB5) On Aluminium (AA6061). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivagiganesan, Dhayalan (2019) Design And Construction Of Food Waste-Biogas System For Small Scale Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suhaimee, Muhamed Emeer Shazreef (2019) Design Improvement Of The Deflasher Mechanism For Blow Molding Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suhaimi, Mohd Shafiq Aminuddin (2019) Performance Evaluation Of Water Injection System For Naturally Aspirated Engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suhaimi, Muhammad Hafiz Azim (2019) Development Of Chassis For Shell Eco Marathon. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sulaiman, Mohd Syahfendy (2019) Design Of Aerodynamically Efficient Shell Eco-Marathon Urban Car Through Front Face Design Optimization. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sulaiman, Muhamad Faizal (2019) A Study On Body Panel Fabrication On Light Vehicle Structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sulaiman, Muhammad Syafiq (2019) Structural Equation Model Of Technology Innovation Model Using AMOS For Researsher Of FTK In UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sulong, Mohd Faez Azrin (2019) Study Of Chemical Properties Of Indoor Air Quality At UTeM Library. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

T

T.Mhd Arifin, Tengku Ahmad Salahudin (2019) Design And Development An Ergonomic Hand Wrist Support For Computer Mouse User. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Te, Jin Hang (2019) Design And Analysis Mini Hydro Power Turbine Blade. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

V

Vejekumaran, Dharshini (2019) Optimization Parameters Of Injection Moulding Machine For Reducing Warpage On Polypropylene (PP) Dog Bone Part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Viswanathan, Venuraj (2019) Tensile Test And Flexural Test Analysis For Banana Plant Stem Fiber Being Reinforced With Polyester Resin Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

W

Wan Hanafi, Wan Muhamad Azam Fikry (2019) Design And Development Of Vertical Hydroponic System For Urban Community. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Mohd, Wan Fakhruddin (2019) Comparison Of Tobacco And Electronic Cigarette Smoke Pollution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Woon, Jun Jet (2019) Ergonomic Risk Assessment On Weight Lifter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Y

Yahya, Aizad (2019) Design And Fabrication Of Vehicle Trainer Kit For Educational Purpose (Suspension System) With Aide Of Computer Aided Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusof, Mohd Amir Arif (2019) A Study On New Material Of Building Partition Wall Fabricated From Biocomposite Coconut Fiber-Based. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Z

Zahisham, Zuhayra Raihan (2019) Formulation Of Anti-Friction Biodegradable Grease Using Palm Oil With Addition Of Lithium Hydroxystearate And Zinc Diamyl Dithiocarbamate (ZDDC). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zaimi, Mohamad Qaiyum (2019) Development Of Regenerative Braking Simulator Using Pugh's Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Mohamad Noorsalem (2019) Development Of Low Cost Integrated Solar Panel Holder To Increase Solar PV Panel Efficiency. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakariah, Muhammad Nadzrin Zariq (2019) The Study Of Flank Wear Using Coated Alnova (A1CrN) Boron Steel (22MnB5) On Aluminium AA6061. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zolkefle, Muhammad Zakki (2019) Improvement On Light Reflective Jacket To Increase Visibility Of Motorcyclist. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkafle, Muhammad Zulfikri (2019) Experimental Study On Mechanical Behaviour Of Fused Deposition Modelling (FDM) Printed Parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkefly, Muhammad Zawawi (2019) Numerical Study Of Thermal Enhancement In Microchannel Heat Sink With Applying Cavities Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Nor Fairuz Safra (2019) Fatigue Performance Of Additive Manufactured Polymer With Different Composition Of Raw And Recycle Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulmahdi, Muhammad Arif (2019) Temperature Mapping Of Air Conditioning System In Classroom Using CFD Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)