Items where Division is "Library > Final Year Project > FKM" and Year is 2018

A

A. Ravindran., Arjun (2018) Circular Composite Tubes Under Quasi-Static Axial Loading. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab.Rahman, Ahmad Wahi (2018) Effect Of Node Enhancement On Strength Of Body-Centered-Cubic (BCC) Polymer Lattice-Structure Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aziz, Muhammad Fahmi (2018) Mechanical Properties Of Coconut Fibre Reinforced Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd. Bashir, Aimaduddin Azfar (2018) Design Optimization Of External Coolant Filter For Metal Machining Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Raheem, Abdul Mueezz (2018) The Effect Of Carbon Nanotube Aspect Ratio On The Functional Properties Of Electrically Conductive Adhesives. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Nur Shakira Suhana (2018) Energy Harvesting From Mechanical Vibration Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zainuddin, Ahmad Syahmi (2018) Fabrication And Characterization Of Carbonized Electrospun Nanofibres From Polyacrylonitrile And Polyvinyl Alcohol Precursors. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmed Fauzi, Mohamed Fiqri (2018) Comparison Of Laminar And Turbulent Model Of Water Flow In Microchannel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Khalis Alwi (2018) Effect Of Different Concentration Of Carbon Nanotube (CNT) In SAC305 Solder Alloy On The Hardness, Wettabilitty And Resistivity Under Thermal Aging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hamzah, Muhamad Nasruddin (2018) Fabrication Of Uniaxially Aligned Electrospun Nanofibre Using A Rotating Collector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Nur Hazira (2018) The Correlation Between Machinibility And Surface Roughness In CNC Lathe Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aseri, Nur Amanina Syazwani (2018) A Study On The Effect Of Physical, Mechanical And, Morphological Properties Of Pineapple Leaf Fiber Reinforce Cornstarch Biodegradable Plastic Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Zaim (2018) Effect Of Type Of Substrates To Conductive Ink Under Thermal Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Chan, Chen Hua (2018) Suppressing Structural Vibration Using Multiple Arrays Of Linear Dynamic Vibration Absorber (DVA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Kin How (2018) The Impact Behaviour Of Hybrid Kenaf/Glass Fibre Reinforced Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wahab, Nor Fatin Izzati (2018) Effect Of Humidity On The Mechanical Performance Of Joints Bonded With Electrically Conductive Adhesive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chee, Ying Chen (2018) Study On Single Strut Formation Using Additive Layer Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Wei Wei (2018) Tribological Performance Of Hybrid Composites Based On Palm Kernel Activated Carbon And Alumina Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Hong Leong (2018) Improvement Of An Indoor Environmental Quality (IEQ) In Engineering Laboratories. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Wei Sheng (2018) Surface Textured Palm Kernel Activated Carbon Reinforced Polymeric Composite As A Potential Self-Lubricating Bearing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Yung Oon (2018) Thermal Insulation Material Made From Kenaf Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choo, Hae Ling (2018) Design Of Car Cooling Device For Car Park In Hot Weather Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Lian Kai (2018) Study The Absorption And Regeneration Of Desiccant Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

G

Ghazali, Muhammad Hafizuddin (2018) Effect Of Reflow Time On Hardness,Electrical Resistivity And Wettability Of CNT In SAC305. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Goh, Zhongyu (2018) Influence Of Roof Shape On The Natural Ventilation Potential Of A Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hamidi, Roshidah (2018) Investigation On Electrical Properties,Morphological Analysis And Surface Roughness Of Silver Nanoparticles-Filled Epoxy Conductive Ink. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamzah, Muhammad Haziq (2018) Comparison Of Laminar And Turbulent Model Of Nanofluid Flow In Microchannel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hew, Khai Sheng (2018) Dynamic Stability On Lateral Directional Of An Aircraft Using Aileron. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hong, Tzy Yi (2018) Analysis Of Woven Fabric Characteristics For Composite Reinforcement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hor, Woei Tsong (2018) Geometric Optimization Of LED Heat Sink For Cooling Of LED Lighting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

I

Idris, Asyran Ariff (2018) Fluid Properties Of Automotive Engine Cooling System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ishak, Muhamad Shahrul Nadzrin (2018) Analysis Of Stiffness And Strength Of A Complex Topology Optimized Thermoplastic Part Designed For 3D Printing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Iskandar, Muhammad Syafiq (2018) Development Of Innovative Self-Fabricate Contact Angle Measurement Tools For Hydrophobicity Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

J

Jamal Zabidi, Puteri Amirah (2018) The Characterization Of Fuel Injector System For Automotive Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamalludin, Muhammad Rizuwan (2018) Integration Of Topology Optimization And 3D Printer In Designing A Bicycle Structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

K

Kamarulzaman, Muhammad Zahin (2018) Effects Of Annealing On Punches Head And The Repurcussion On The Product Lifecycle And Cost (UTeM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kusraju, Jerventh Rau (2018) Investigation Of Starch Adhesion In An Open Source 3D Printer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Lam, Chee Sheng (2018) Study On Temperature Distribution On Different Combination Of Liquid And Gases For Plasma Generation Using Ansys Fluent. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Jia Yi (2018) Energy Efficiency Analysis For The Laboratory Complex. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leong, Kok Seng (2018) Post Processing Techniques Of 3D Printed Part And Its Effects On Mechanical Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Guo Dong (2018) Development And Analysis Of Low Cost 3D Printing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Choon Yong (2018) Tribological Performance Of Hybrid Composites Based On Palm Oil Fibres And Alumina Powder Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Jacky Tung Jiong (2018) Thermal Comfort Of A Typical Office Building A Parametric Investigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Md Radzi, Muhammad Syafiq (2018) Numerical Investigation Of Nanofluid Flow And Heat Transfer Inside A Microchannel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mhd Sharif, Mhd Alif (2018) Fabrication And Characterization Of Polyacrylonitrile Electrospun Nanofibers With Conductive Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Ibrahim (2018) Development Of Modular Hull Of A Submersible Vehicle For Engineering Services. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Nazer, Zulfadli (2018) Numerical Simulation Of Flow Inside Intake Manifold For Spark Ignition With PCC. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Norani, Nor Ayu (2018) Design A Non-Electrical Table Fan. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ghazali, Adam Syafiq (2018) Regenerative Braking Effects On Isothermal And Adiabatic Energy Storage Of Hydro-Pneumatic Driveline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nawar, Nur Qurratu Aini (2018) An Investigation On Physical, Mechanical And Morphological Behaviour Of Corn Starch Reinforced With Alkaline Treated Pineapple Leaf Fibre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Tarmiji, Ahmad Kamil (2018) Numerical Investigation Of Water Flows Inside A Microchannel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Salim, Ariff Shazal (2018) Automatic Food Processing System Using Water Hydraulic Technology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Zailan, Zaima Syafiqah (2018) Design And Analysis Of An Underwater Propeller Blade. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafar, Ahmad Al Idrisi (2018) Parameter Optimization In 3D Printer Recycle Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

N

N. Vijayakumar, Jagatheskumar (2018) Developing A Multi Water Droplets Evaporative Cooling System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nawam, Muhammad Zaid (2018) An Aerodynamic Study Of Car Spoiler Using CFD. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Ann Qi (2018) The Development Of Underwater Manipulator For Mini-ROV Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Cher Sean (2018) A Study On Mechanical Properties Of Hybrid Kenaf/Kevlar Fibre Reinforced Thermoplastic Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Hak, Nik Amirudin Anas (2018) Redesign Of Motorcycle Towing Device For Commercialization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nikki, Han Tin Loon (2018) Thermal Rectification At Solid-Liquid Interface Of Simple Liquid In Contact With Face Centered Cubic Lattice. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nonchik, Siti Nur Nadhirah (2018) Comparison Of Modelling Between ARX And ARMAX Model In System Identification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norrizan, Muhammad Khaizuran (2018) A Study On Electrical Properties Of Flexible Printed Electronic Circuit Subjected To Cyclic Bending Load. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

O

Osman, Anwar Farid (2018) Tribological Performance Of Waste Slurry Powder Reinforced (Polypropylene) Using Pin On Disk Tribometer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Othman, Muhammad Amin (2018) Hygrothermal Aging Effect On Reliability Performance Of Electrically Conductive Adhesives (ECA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Muhammad Firdaus (2018) Design And Development Of Portable Water Treatment System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Othman Ahmed, Talal Mahmood (2018) Improving The Fatigue Life Of Fastener Holes By Using Cold Expansion Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Q

Qasem Al-Areqi, Qasem Ahmed (2018) Effect Of DBD Plasma Actuator At The Middle Span Of Airfoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Raja Ismail, Raja Nazirul Mubin (2018) Utilization Of Electrical Heater Unit And Secondary Air Injection Into Underbody Catalyst For Reduction Of Exhaust Gas Emission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rofii, Nursahira (2018) Thermal Insulation Material Made From Kenaf Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozali , Nurul Syafika (2018) Effect Type Of Conductive Ink To Stretchable Printed Circuit Under Thermal Performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S

S.Thanga Raja, Lingeshwaran (2018) Drag Reduction Using Dielectric Barrier Discharge Plasma Actutor On Truck. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saifuddin, Mu' Ammar Danii (2018) The Effects Of Zinc Dialkyldithiophosphates (Zinc DDP) As An Anti Wear Nanoparticles In Engine Oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsuri, Amirul (2018) Influence Of Gear Ratio Pattern On Vehicle Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Singh, Vishaldeep Tar (2018) Mechanical Properties Of Coconut Shell In Reinforced Polymer Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sofian, Muhamad Fitri (2018) Application Of Kenaf Fiber-PP Composite For Fabrication On Interior Part Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhaimi, Muhammad Aiman (2018) Effect Of Line Thickness Cross-Sectional Geometry To Stretchable Printed Circuit Under Thermal Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suznan, Fazal Amsyar (2018) The Effect Of Dielectric Barrier Discharge (DBD) Plasma Actuator On The Leading Edge Of An Airfoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Tan, Kok Sian (2018) Predicting Crack Location In Plate Using Nonlinear Vibro-Acoustics Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Gee Xiang (2018) Dry Frictional Characteristic Of Surface Textured Acrylic Using Pin-On-Disc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Yong Soon (2018) Optimization Of Synthetic Jet Actuator Location For Aerodynamic Drag Reduction Of Backward-Facing Step. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wan Abdul Rahman, Wan Ahmad (2018) The Effect Of Substrate Surface Conditions On Mechanical Performance Of Electrically Conductive Adhesives. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Eu Lik (2018) Investigation On Thermal Performance Of Prospective Green Materials As Building Wall Insulation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Hwei Jen (2018) Designing An Innovative Manual Washing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Yew Sheng (2018) Design Of Peel Test Fixture For Adhesively Bonded Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yap, Joon Ping (2018) Study Of Computational Fluid Dynamics On Photovoltaic Thermal Solar Water Collector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeoh, Chun Sian (2018) Material Selection For Car Disc Brake Pad Using MCDM Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Z

Zaidi, Mohammad Zharfan (2018) Effect Of Temperature On The Mechanical Performance Of Joints Bonded With Electrically Conductive Adhesive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zairullizam, Muhammad Syamirul Ikhwan (2018) The Study Of Close-Coupled Versus Underfloor Catalyst Emission For Proton Persona 1.6cc. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)