Design and analysis of the optimum gate size for multi-cavity plastic name card injection mould

Abdullah, Nor Fazliyana (2015) Design and analysis of the optimum gate size for multi-cavity plastic name card injection mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

	Text (24 Pages) Design And Analysis Of The Optimum Gate Size For Multi-Cavity Plastic Name Card Injection Mould 24 Pages.pdf - Submitted Version Download (465kB)
	Text (Full Text) Design and Analysis of The Optimum Gate Size for Multi-Cavity Plastic Name Card Injection Mould.pdf - Submitted Version Restricted to Registered users only Download (4MB)

Abstract

This final year project is about “Design and Analysis of the Optimum Gate Size for Multi-Cavity Plastic Name Card Injection Mould”. This project is focused on the design of the gate size dimension (for two-cavity), analysis of the optimum gate size and suitable material for the selected optimum gate size dimension. The design of the Plastic Name Card Holder and the several of the gate size dimension were designed using CATIA V5R19 software. The Simulation Moldflow Adviser (SMA) software are used to analyse the optimum gate size for the two multi-cavity Plastic Name Card Holder. Material used for analysing the Plastic Name Card optimum gate size are Polypropylene (PP), Polycarbonate (PC), Polyethylene (PE), Acrylonitrile-butadienestyrene (ABS) and High-Density Polyethylene (HDPE). For the start with analysing the suggested of several dimension of the gate size by using SMA software of existing design. Then, the optimum gate size dimension and the suitable material are determine according to the SMA analysis.

Actions (login required)

View Item