Items where Division is "Library > Final Year Project > FKP" and Year is 2018

A

Abd Razak, Ammar Fikri (2018) Design and development of rotary jigs. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Kadir, Muhamad Fitri (2018) Development of value stream mapping for palm oil company : a case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Mohd Aliff Mukmin (2018) Productivity improvement through TPM adoption on printing machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nurul Fatehah (2018) Influence of swelling media and soaking parameter to the physical properties of natural rubber/EPDM nanocomposites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Muhamad Hairee Izwan (2018) Analysis and validation of workstation design for mechanical assembly department in aero-composite industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Norisfarina (2018) Study On Waste Glass Milling For Feldspar Replacement In Ceramic Tile. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adam, Nur Ashikin (2018) Investigation of mechanical properties and microstructure when processing alumina-based cutting tool under different pressure using cold isostatic pressure (CIP). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adnan, Nor Farahin Aida (2018) Process optimization to improve surface finish in fused deposition modeling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amran, Mohd Firdaus (2018) Effect of electron beam radiation on the dispersion of graphene nanoplatelets in nylon66 based polymer composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aziz, Nor Azimah (2018) Effect of heat treatment on mechanical properties of equal channel angular pressing (ECAP) processed A356 aluminium alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizan, Aniza Nazirah (2018) Time study and work measurement implementation in manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Syarmine Afiqah (2018) Investigation of welding parameters effect on welding distortion of conventional gas metal arc welding (GMAW) and cold arc. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

B

Badrulzaman Khan, Elyssa Elnna (2018) Investigation on the tribological and hardness properties of nickel-quarry dust composite coating prepared by various surfactant contents. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bakri, Julian (2018) Development Of Non-Woven Fabric Supported Functionalized Multi-Walled Carbon Nanotube(MWCNT)/Polyethersulfone (PES) Membrane For Water Treatment In Sarawak Rural Area. Project Report. UTeM, Melaka. (Submitted)

Basri, Siti Nur Athirah (2018) Improvement of building and facilities maintenance performance : satisfaction of occupants and users. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Boo, Jia Min (2018) Development of new standard operation procedure configuration for disassembly work. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Chan, Hui Teng (2018) Degradation behaviour of pineapple leaf fibre reinforced poly lactic acid under stimulated conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chin, Ee Ling (2018) Consideration of hand grip strength in the hand grinder handle to improve subjective comfort and work productivity. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

F

Fan, Kerry (2018) Cyclic voltammetry analysis of transition metal chalcogenide tungsten ditelluride (WTe₂) thin films. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fong, Choon Yew (2018) Development Of An Open-Source 3-D Printable Surgical Instruments Made From ABS/PLA Plastic. Project Report. UTeM, Melaka. (Submitted)

Foo, Wei Hong (2018) Study on LED growth light to improve the quality of lettuce and help in plants growth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

H

Humoc, Kennedy Bradley (2018) Implementation Of Kap In Technology Transfer And Commercialization. Project Report. UTeM, Melaka. (Submitted)

Husin, Hanaz (2018) Investigation on CNC turning parameters by using a vortex tube cooling system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

J

Jamingon, Nur Afiqah (2018) Validity and reliability of 3D camera body scanning anthropometric measurement system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamri, Aisyah (2018) Quality improvement of AI machining under CNC automated coolant supply. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Janethy, Jahnes (2018) Design Of Multifunction Welding Jig For Butt, Lapp And T-Joint Using CATIA Software. Project Report. UTeM, Melaka. (Submitted)

K

Kadir Naina, Nur Shahirah (2018) Fused deposition modeling and vapour smoothing process for surface finish improvement of biomedical implant replicas. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Karami, Nur'ain Syamimi (2018) Formulation of maintenance cost forecasting model at Pejabat Pembangunan Universiti Teknikal Malaysia Melaka (UTeM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Koay, Tze Wei (2018) Implementing OEE Availability Dashboard In Semiconductor Manufacturing Environment. Project Report. UTeM, Melaka. (Submitted)

L

Lau, Ghee Siang (2018) Development of automatic home plant watering system using soil moisture sensing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lau, Zi Hao (2018) Formulation of glass ceramic foam from waste for low thermal conductivity application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Cheang Fu (2018) Identification of hazardous condition of workplace in wood-based furniture industry : A case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Lee, Sing Chi (2018) Waste reduction of safety pin by implementing Kaizen activities in textile manufacturing company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Woei Quan (2018) Optimization of mechanical behaviour of reclaimed carbon fibre reinforced polypropylene by using compression moulding via response surface methodology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Zhen An (2018) Optimization of spray paint process on high cosmetic job. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liew, Simon Hong Xin (2018) Process optimization with lean approach : roof tile. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Chin Xian (2018) Incorporating of grey wolf optimization to the bees algorithm for continuous optimization in welded-beam design problem. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Wan Qin (2018) Study on hand grip orientations versus hand grip strength for Malaysia adults. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liman, Nadia (2018) A comprehensive study on parametric airplane nose design using NURBS. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M

Mahamed Rasdi, Mohamad Rafiq Farhan (2018) Development of modular automated storage and retrieval systems. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Marzuki, Muhammad Shamil Alif (2018) Study of mechanical and thermal properties of HDPE in response to accelerated thermal aging. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Masuri, Muhammad Radzi (2018) Thermoelectric properties of Ag doped Na0.8CoO2 synthesized via citrate-nitrate auto combustion reaction. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Amin, Fatin Nur Amira (2018) Cryogenic Carbon Dioxide (CO2) cooling on machined surface of titanium alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Mat Nasir, Khairul Azwan (2018) Quality improvement by implementing Kaizen activities in textile manufacturing company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md. Mussa, Md. Norazree (2018) Degradation of physical and mechanical property of starch modified natural rubber composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Misbahul Munir, Nurul Qamariyah (2018) Design of PID controller with integration of artificial intelligence for machine tools application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Sattar, Mohamad Rusydi Azim (2018) Development of mould to fabricate alumina cutting tool by using 3D printer technology with ABS and PLA material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Yusof, Izzat (2018) Effect of annealing temperature on structural properties of aluminium doped zinc oxide nanoparticles synthesized via sol gel auto combustion. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nor, Nur Madiah (2018) Investigation on flexural and compression strength vacuum assitsed fuse deposition modeling system specimens. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sapeli, Ahmad Zulfadhli (2018) Polyurethane filled graphene nanoplatelets foam nanocomposites for sound absorption and heat resistance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zafri, Mazatul Nadia (2018) Synthesis of calcium phosphate from local fish bone for biomedical application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohmad Khalid, Nur Zalikha (2018) Design of NPID double hyperbolic for precise positioning of machine tool application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

N

Ng, Boon Yong (2018) Development of maintenance monitoring system for Faculty of Manufacturing Engineering. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Teck Ming (2018) Quality improvement in manufacturing industry using Six Sigma methodologies. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

P

Phoo, Yoong Hau (2018) Evaluation in disturbance force compensation via state observer and controller design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Poo, Wei Sheng (2018) Additive manufacturing of natural fibre reinforced thermoplastic composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Pua, Rui Si (2018) Reinforcement benefits of natural fiber in lime-treated asphalt based damping material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

R

Rizali, Sahril (2018) Silicone rubber filled wollastonite mineral filler for high voltage insulation application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Robert, Sanggin (2018) Development of semi-automated amplang packaging machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Rosli, Salsabilah (2018) Study on an automated machine signal monitoring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rozali, Fatin Nadhirah (2018) Characterization of indium zinc oxide coating on kenaf fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S

Sahatim, Nurshuhadah (2018) Corrosion behaviour of mild steel coated with epoxy-zinc oxide nanoparticles film in 3.5% WT NaCl solution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saiffuddin, Puteri Nadiah (2018) Study The Effect Of Nanoclay On Poly (Lactic Acid) And Polybutylene Succinate As Matrix For Pineapple Leaf Fibre Based Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsudin, Puteri Nurul Syaza Syahirah (2018) Ultrasonic assisted 3D printing to improve printed parts surface finish. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Seah, Mei Yin (2018) The Development Of Object Measuring System Using Image Processing Technique. Project Report. UTeM, Melaka. (Submitted)

See, Li Xin (2018) Yield improvements in semiconductor manufacturing using TRIZ methodology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamsharhadi, Muhammad Izzuddin (2018) Bobbin friction stir welding of AA1100. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamsurijan, Salehah (2018) Improvement in thermal printer line production by using Kaizen method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shellahmutto, Sakthivel (2018) Investigation of block copolymer effect on the physical and mechanical properties of retort cast polypropylene (RCPP) for food packaging film. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sii, Hee Hing (2018) Electrodeposition of binary nickel-chromium (Ni-Cr) alloy on aluminium 1000 series substrate in organic solvent. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

T

Tan, Boon Yee (2018) Photocatalysis application of TiO₂ and Fe₂O₃ nanostructures. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Jian (2018) Enhanced automated coolant supply system for CNC machining. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Yon Shern (2018) The readiness of Malaysia manufacturing companies in implementing Industry 4.0. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Yu Qi (2018) A biomechanical and subjective assessment and comparison of two wheelbarrow designs. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Zhen Qi (2018) Control strategy of burr formation at sawing process for the improvement of sawn package. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ting, Carron Shuang Sia (2018) On the use of nano fibrillated cellulose (NFC) fiber as reinforcement in polylactic acid (PLA) matrix composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tiong, Jing Yin (2018) Design And Development Of Ergonomics Mouse Tray For Office Workers. Project Report. Universiti Teknikal Malaysia Melaka, Melaka. (Submitted)

Tung, Fang Wen (2018) Design of a grip handle for manual lifting and carrying of long metal bar. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

W

Wan Md Hatta, Wan Nor 'Izzati (2018) Comparison Study Of Machinibility Performance Based On Automated Coolant Supply System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Y

Yap, Ching Yee (2018) Material deposition on aluminum by electrical discharge coating (EDC) with tungsten powder suspension. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yap, Peei Yong (2018) Sheet metal lift trolleys : effects of design differences on muscle activity and subjective perceptions of operators. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yomli, Sofia Mulyani (2018) Enhanced the mechanical properties of aluminium alloy 6061 of welding parts by T6 heat treatment process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Z

Zaiful Hakim, Khairul Firdaus (2018) Mechanical properties of intermetallic compounds for automotive applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainol, Nor Zulaika (2018) Welding distortion analysis using FEM and experiment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainuddin, Irne (2018) Study of nickel titanium dioxide coating prepared by electrodeposition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainuddin, Muhammad Hakim (2018) Investigation of wear performance of alumina based cutting tool by using different Cold Isostatic Press (CIP) pressure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zali, Mohamad Zainudin (2018) Analysis the awkward posture ergonomic risk and workstation simulation at aero composite industry (mechanical assembly). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Nor Aifa (2018) Repair welding on stainless steel to carbon steel orbital pipe joint. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulmi, Mohamed Zaid (2018) Development of a mobile robot with human-robot interaction (HRI) features. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)