Items where Division is "Library > Final Year Project > FKP" and Year is 2009

A

Ab Rahman, Saeman (2009) Development Of Automated Satay Assembly Mechanism Using Gear Design Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Rahim (2009) Design Optimization Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul 'Alim, Abdullah (2009) Remote Sensing Walker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Azim, Mat Salleh (2009) Surface And Sub Surface Analysis When Hard Turning Of AISI D2 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Ubaidah, Abdul Aziz (2009) Design And Development Of Robot Interface For Controlling 6 DC Motor Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Addam , Paat (2009) Light Tracking Device For Solar Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Musli , Osman (2009) Comparative Study Of End-Mill Performance Between Straight And Spiral Flute. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rasydan , Hasan (2009) An Experiment Study Of The Effect Of RPM On Turning Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syahid , Mohamad (2009) A Study On The Application Of Value Stream Mapping In Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aida Bahiyah, Mohd Rodzi (2009) Labor Utilization And Man To Machine Ratio At A Semiconductor Facility. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al Amin, Mohamed Sultan (2009) Development Of General Value Stream Mapping For Productivity Improvement And Kaizen Implementation At An Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alwi, Zulkefli (2009) Simulation And Control Of Water Tank System Using LabVIEW And Automation Studio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir, Halil (2009) Preliminary Design Analysis Of Hydraulic Transmission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anbalagan, Munusamy (2009) Application Of XY Table Continuous Motion Programming With PC Based Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arman Shah, Abdullah (2009) Design Of Timing Chain Cover Assembly Jigs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azianashima Heedayu, Zainal (2009) New Design Using Fiber Glass Composite (FRPC) For Jimny Back Door. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azwarni, Mohamad (2009) Effective Implementation Of Process Capability Index Cpk In Minimizing Reject Rate For Batch Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Bong , Kuan Fung (2009) Engineering Design Analysis On 5 Kg Payload Gripper For Comao Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

C

Chan, Wai Weng (2009) Influence Of EDM Machining On Surface Integrity Of SKD 11 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Rozaida , Che Mod (2009) Design Improvement On Support System For Resin Based 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiang , Kok Wai (2009) Optimization Of Machining Parameters In Laser Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin , Feei Ping (2009) Design And Analysis Of Robot Manufacturing System For Automotive Industry. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chua, Denis Kiang Wui (2009) An Accuracy Study On The Positioning Of The Pick And Place Manipulator Trainer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

Dayang Kartikasari, Abang Abdullah (2009) Mechanical Properties Of Wood Plastic Composite Made Of Recycled Polypropylene And Recycled Wood Flour. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

Elyas, Talib (2009) The Mechanical Properties And Morphology Study Of The Silica-PE Composite Using Modified Silica. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Enda Nur Malia , Ngah Deman (2009) Root Cause Analysis Of Core Pin Quality Problem Using Cause And Effect Diagram. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fara Adillah, Che Idris (2009) Design And Analysis Of Floating Pump Platform Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faridah, Omardin (2009) A Study Of Project Management Based On Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimahtul Adnin, Sulaiman (2009) A Study On Graphite Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

Gakim, Miron (2009) Study Of Structure, Microstructure And Corrosion Properties Of AISI 304 Toward Marine Specification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Kok Hway (2009) Application Of Triz Methodology In Casting Process : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ganesh Kumar , Krishnan (2009) To Investigate Effect of Strengthener Variation in Mechanical Properties of Metal Matrix Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hafiz, Mohd Salleh (2009) Study On Design Of Workstation Meeting Ergonomic Requirement For CADCAM Laboratory In FKP, UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haidzer Isa , A Rahman (2009) Analysis The Contribution And Effect Of Coolant To Straightness In Cylindrical Grinding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harlina, Ngah (2009) Study Of The Thermal Properties Of Chitosan Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haryatie , Samsuri (2009) Investigation Of Plate Welding Quality By Robot Welding Using Nondestructive Technique. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Haslina, Mohammad (2009) Productivity Improvement Using Work Study Assessment At A Communication Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Idris, Saaran (2009) Design And Fabrication Of A Checking Fixture For A Press Part Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Intan Salafinas, Ahmad (2009) A Mechanical Study On Cocoa Husk – Glass Fibre/ Polypropylene (PP) Hybrid Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail , Bolong (2009) Investigation On The Effect Of Heat Treatment On Fracture Toughness Of Pressure Vessel Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Izzad Jauhari , Sarlan (2009) Stamping Oil Conditioning Monitoring At Miyazu Using FT-Ir : Water Peak Monitoring For Line J. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kamal Syahidi, Kamaruddin (2009) Development Of Visualization System For Material Handling System Using Wonderware Intouch Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kaswady , Husman (2009) Analyze The Effect Of Depth Of Cut Towards Surface Roughness In Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Kuo Zhuan (2009) Improvement On Rotary Draw Tube Bending's Parameter By Design And Analysis Using FEA Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Nizam, Zainuddin (2009) Effect Of Coating Condition On The Corrosion Properties Of Mild Steel Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lau, Sie Yee (2009) Fabrication Of Wood Plastic Composites From Lalang Grass And Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Pei Chen (2009) An Application Of Sampling Method For Quality Control : Case Study On Roller Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Wai Kiong (2009) Programmable Pick And Place Robot Arm For AGV System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leow, Shell Fang (2009) Measurement Uncertainty Evaluation Computation Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Chong Wei (2009) Optimization Of Machining Parameters In High Speed Milling Of Aluminum 6061. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Siang Ying (2009) Effect Of Fullerenes Nanofiller And Carbon Black Filler Of Corrosion Activities On Paint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Luei , Hong Keat (2009) Surface Modification Of Low Carbon Steel In Laser Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Mahadi , Mustafa (2009) A Feasibility Study On Design For Environment And Design For Sustainability Application In Boat Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Moganaganes , Sundaram Murgan (2009) To Investigate Effect On Surface Roughness For The Stainless Steel 304 Materials In CNC Lathe Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Adam, Mohamad Rajuni (2009) Light Weight Manual Lifting Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azril , Mohamad Noor (2009) Development Of Robot Movement For Polishing Process Using Workspace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fadlizan, Rosni (2009) Vibration Insulator From Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fazli, Husain (2009) The Influence Of Cu-Reinforced Aluminium Metal Matrix Composite To The Mechanical Properties, Corrosion Resistance And Microstructure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Arsyan, Kamaruzaman (2009) Heat Insulator From Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Asa'ari , Rahmat (2009) Study Of The Epoxy Resin Bonding Process Of Aluminium Alloy : Chemical Pickling Process (Sulphuric Acid). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammeed Azizi , Rudy Abdullah (2009) Design Improvement On A Product Using DFMA: Industrial Machinery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adib, Tukiran (2009) Development Of An Automated Keropok Lekor Cutting Machine Using Pneumatic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Badli , Ramli (2009) Redesign Of Nail Clipper Through BD Design For Assembly Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ekhwan , Rahim (2009) Study On Contribution And Effect Analysis Of Coolant On Roundness In Cylindrical Grinding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadli , Ismail (2009) An Experimental Study Of The Effect Of The RPM To Surface Roughness In Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairuz, Shahadan (2009) Investigating The Force Imposed In Polishing Process For Comau Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Abu Bakar (2009) Development Of 3-Axis Routing Machine Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazrin , Razali (2009) Investigation On The Effects Of Rake Angle Variations On The End Mill Wear, Cutting Forces And Surface Finish. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fitri , Jamaludin (2009) Assessment Of Wire EDM Parameters On Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiszuddin, Mohd Puaad (2009) Development Of Workholding Device For Loaded PCB Cutting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Ismail (2009) An Experiment Study Of The Effect Of Cutting Speed, Depth Or Cut And Feed Rate To Roundness In CNC Lathe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Mohammad Noor (2009) Quality Improvement By Using Taguchi Method In Disk Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hariz Nasfu , Mohd Azmi (2009) Study Of Epoxy Resin Bonding Process Of Aluminium Alloy : Chemical Pickling Process (Hydrochloric Acid). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Ikhwan Hafiz , Md Noor (2009) Six Sigma (DMAIC) Implementation In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ikram, Idris (2009) An Optimization Of Temperature Controller By Using Programming. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izwan , Mansor (2009) Analysis The Contribution And Effect Of Coolant To Surface Roughness In Cylindrical Grinding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jazrin, Shamsul Bahrin (2009) Programmable Logic Control (PLC) Application For Stamping Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamarul Nizam, Abdul Hamid (2009) Optimization Of Measurement Parameters In Non-Contact Measuring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Adli , Mohd Zin (2009) The Investigation On The Fatigue Crack Growth On Welded Pressure Vessel Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairulfikri, Samsudin (2009) Design And Prototyping Of Semi-Automated Storage And Retrieval System (S-AS/RS) Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Muhayiddin, Muhammad (2009) Semi-Automated Dispensing Medicine System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazili , Yaacob (2009) Design And Development Of Pneumatic Gripper For Comau Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Noor Ikhwan, Mohd Fauzi (2009) Noise Insulator From Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Norhaffiz, Noor Aini (2009) Productivity Analysis of Table Top Fan Assembly Process using Arena Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shafadilah , Mashor (2009) Online Monitoring And Control From A Database Server For Manufacturing System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Shafiq Wazzan, Razali (2009) Modeling Of Traffic Light Control System Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shah Fahmi , Zainuddin (2009) A Study On Welding Defects Of Pressure Vessel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Syukri, Mohamed (2009) Automated Factory Safety Control System Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaki , Sharifuldin (2009) Stamping Oil Conditioning Monitoring At Miyazu Using Ft-Ir : Water Peak Monitoring For Blanking Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zamri, Mohd So'ad (2009) DFA Using Computer Program. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Zulhilmi , Omar (2009) Development Of Vise For Drilling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Azim , Azami (2009) Design Of Automatic Tool Changer For Welding Gun Tip. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhamad Zaid, Jamal (2009) Design And Development Of Finger Based Exerciser Device For Computer Games Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Azfar , Abdullah (2009) Study On Deep Cavity Machining Using EDM Die Sinking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz, Mohd Timyati (2009) Effect Of Surface Finish On Fatigue Life Of Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faris, Md Yusuf (2009) Design And Development Of Automated Counting Machine For Industrial Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaous, Ismail (2009) Ergonomic Design Of A Baby Highchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafiz , Ahmad (2009) Case Study : A Study On Overall Equipment Effectiveness At Electronics Manufacturing Company. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Hidham , Haris (2009) Development Of Monitoring System From A Temperature Data Collector. Project Report. UTeM, Melaka. (Submitted)

Muhammad Izwan, Isa (2009) Statistical Analysis Of The Rapid Prototyping 3D Printer Process To Determine Accuracy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Jazmi , Ibrahim (2009) Development Of Spreadsheet Based Programming For Maintenance Management Systems. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Khairul Aizat , Mohd Radzi (2009) Design Improvement On An MPOC Using DFMA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Munawwar Hasan , Rohaizan (2009) Assessment Of EDM Parameters On Aluminium 5083. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Qusyairi , Abdul Rahman (2009) CO2 Laser Cutting Of Ceramic Tiles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shaiful, Salleh (2009) Controller Development Of An Automated Press Machine For Disposable Pet Bottle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Nasae , Mahyuddin (2009) Design And Analysis Of Automatic Slump Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Na'ain , Shari (2009) Stamping Oil Condition Monitoring At Miyazu Using FT-iR. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nadirah Adilas, Che Arbaei (2009) Optimizing Operations In Manufacturing Industry By Using Linear Programming. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Najla Shazwani , Din (2009) Failure Analysis Of Conductive Paint Coating Using Electrochemistry Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nashrul Adzim , Nashruddin (2009) Obstacle Avoidance Method For Automated Guided Vehicle (AGV). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ng, Yuet Wan (2009) A Student On Basin Frame Production : A project Management Approach. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nik Mohd Hazizullah, Abdul Ghani (2009) Design And Development of Multifuntion Jig And Fixtures For Press Rivet Clutch Used In Motorcycle Engine Assembly-A Case Study On HICOM YAMAHA Manufacturing Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nithya , Selvakumaran (2009) Investigation Of Shot Peening On The Fatigue Strength Of Aluminium Alloy. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noor Afendi , Nordin (2009) Study The Mechanical Properties Of Marine Composite Material. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noor Amin, Shamsudin (2009) A Study On Calibration Technique Required For Optical Component In Non-Contact Measuring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Diana, Mohd Diah (2009) CMM's Stylus Approach Direction Effect On Error Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Farazdillah, Ismail (2009) Production Efficiency Enhancement Using Improved Working Posture Of Material Handling Activity In Furniture Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Masnira , Muhammed Salleh (2009) Analysis Of Quality Product By Using QFD Method And Satisfaction Criteria On Consumer Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Syafiq, Shaari (2009) A Study Of Mechanical Properties In Relation With Morphological Structure Of PP/Kenaf Fiber Reinforced Plastic Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorazmie Afzam , Muhamad Zaki (2009) Use DFMA Methodology To Analyze On Car Wiper System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorfazilah, Mohd Arsad (2009) An Experimental Study On The Effect Of Turning Parameters On The Surface Roughness Of AISI 1040 Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorlainiewati, Abdullah (2009) The Study On The Effect Of Water Composition In Coolant To The Surface Condition Of Workspiece. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Ashykiin, Mohammad (2009) Study On Mechanical Properties And Morphology Of Banana-Glass Fibre Reinforced Polypropylene (PP) Hybrid Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hafizah , Hassan (2009) System Development Of Software - Sensor Based Force And Torque Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Haslina, Sobiren (2009) The Implementation Of Risk Management At Aerospace Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norashsikin, Mohd Arsad (2009) Investigation On The Effect Of Matrix Variation To The Mechanical Properties Of Metal-Metal Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazwani , Arshad (2009) Study On EDM Electrode Wear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhalis , Abdul Ghafar (2009) Improvement Of Line Following Autonomous Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhelmy, Rominor (2009) Work Study Utilizing Maynard Operation Sequence Technique at Aerospace Manufacturing Company: A Case Study at A320 Spoiler Project. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhidayah , Mohamed Hussin (2009) Improvement Of Shimless Footing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norris Ezwan , Mohamad Nor (2009) Lifting Mechanism or An Autonomous Line Tracking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norsilawati , Ngah (2009) Surface And Subsurface Analysis In Grinding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norsyahila , Ahmad Sahhidan (2009) Application Of General Flow Pattern In Facility Layout. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norziana , Lani (2009) Producing Calcium Cuprum Titanium Oxide (CaCu3Ti4O12) Via Wet Chemistry Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ainieyantie , Kamaruddin (2009) Assessment Of Whole Body Vibration Exposure Among Metal Stamping Operators. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Anis, A. Rahman (2009) Investigating The Behavior Of Forces Using Comau Robot’s Force Sensing Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Atiqah, Ab Ghani (2009) Effect Of Process Parameters On The Mechanical Properties Of RSSP / PP Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hidayah , Amir (2009) Life Cycle and Sustainability Of Design On RTV Silicone Rubber Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Shahirah , Mad Hashim (2009) Rapid Tooling Strategies For Product Customization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Zahirah , Zakria@Zakaria (2009) Study Of Sharp Edge Cutting In Wire EDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhadzwani , Salleh (2009) Design And Analysis Of Comfort Home With Natural Cooling System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul 'Ain , Haris (2009) Preparation And Characterization Of Ceramic Porcelain Prepared Through Slip Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ain , Ismail (2009) Redesign Of A Product Using Boothroyd DFA Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hidayah , Ismail (2009) Producing Calcium Cuprum Mangan Oxide (CaCu3Mn4O12) Via Wet And Dry Chemistry Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Saadah, Abdul Rahim (2009) Design & Analysis Of Multi Led Machine Fixture Using Cad Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulatiqah, Abdullah (2009) The Performance Of Carbide Tools When Hard Turning AISI D2 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhuda , Arifin (2009) Study The Effect Of High Temperature Cycle Exposure To Evaluation On Embrittlement Of Welded Pressure Vessel Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

O

Ong, Chee Shen (2009) Design And Analysis Of Multi LED Machine Fixture Using Pneumatic System And PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

P

Parameswara , Abdul Rahman Subramaniam (2009) High Speed Link Following Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Raja Manisa, Raja Mamat (2009) Effects Of Maleated Polyphropylene (MAPP) On The Mechanical Properties Of Rubber Seed Shell Powder (RSSP)/Polypropylene (PP) Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rina Syahira , Mohd Sharif (2009) Quality Improvement By Using Six Sigma In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rini , Ruslam (2009) Fabrication Of Alumina Crucible. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohaida , Yusuff (2009) Production Efficiency Improvement For Production Line Of Mass Production : A Case Study Using Poka Yoke Concepts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosnah , Sahak (2009) Quality Improvement Of Automatic Cutting And Sewing Machine In Polyprolene Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruzanna Nadia, Nisah (2009) Finite Element Analysis Of A Motorcycle Alloy Wheel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

SKH Muhammad , SKH Abd Rahim (2009) A Study On Practice Of Design For Sustainability And Design For Environment Practices In Automotive Industries In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saiful Bahari, Hamzah (2009) Study On Thermal Growth Effect On Machinery Alignment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Seri Izzatie , Abd. Azizs (2009) Evaluation On Embrittlement Phenomena For Welded Pressure Vessel Steel Exposed To Hydrogen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahirul Aini , Kamarul Khisham (2009) CMM’s Styli Length Effect On Error Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shalizah , Aman Shah (2009) Design Rules Analysis For Sheet Metalworking Using Cad Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shukri , Zakaria (2009) Semi-Automated Lemon Grass Cutter. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Eaisyah , Kamaruzaman (2009) New Packaging Material By Using Mechanical Retting Kenaf As A Natural Filler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Haza, Hasan (2009) CO2 Laser Cutting Of Polypropylene Polymer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Norfaznie , Ahmad Najib (2009) Fabrication Of Dense Alumina Through Slip Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Rabi'ah, Hamzah (2009) Study Of Nozzle Internal Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Rohani, Shafie (2009) Fabrication Of Kenaf Fiber Reinforced Polyester Composite By Using Vacuum Infusion Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Rossmah , Omar (2009) A Quality Study Of Parts Produced By Silicone Rubber Mould Using Vacuum Casting Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Umi Hani, Mohamed (2009) Design And Analysis Of Long Cylindrical Workpiece Fixture Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Zubaidah, Salehudin (2009) Productivity Improvement: A Case Study On Implementation Of Quality At Communication Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Zuraidah , Mohd Isa (2009) Design And Simulation Of Multiple Drilling End Effector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Soh, Pih Lin (2009) Study Of Surface Topography When Machining SKD 11 Tool Steel By EDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhaily , Mohamad Yusof (2009) Investigation On The Fracture Toughness Of Welded Pressure Vessel Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Suzilawati , Abdullah (2009) Application Of SWOT Analysis As A Management Tool For Analyzing Competitiveness Of A Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syarifah Balqis, Syed Mohamed (2009) Study On Tool Wear Effect On Machining Different Type Of Materials By Conventional Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syarifah Noorashiqah, Syed Mohd Zainol (2009) Study The Mechanical Properties And Morphology Of Glass-Carbon Fiber Reinforcement/Polyethylene (PE) Hybrid Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazwan Akmal, Sumaidi (2009) Bluetooth Controlled Stairs Climbing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Tai, Chui Yee (2009) Development Of Aggregate Planning Using Linear Programming Technique In Casting Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Sia Peng (2009) An Improvement On Positioning Technique On Current XY-Table. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tham, Wai Foong (2009) Automatic Guided Cart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Thurairaj , Arumugam (2009) Development Of TPM Spreadsheet For Laboratory. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Tiew, Pooh Bum (2009) Application Of TRIZ Methodology In Solving Arc Welding Problems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

U

Ummi Nazahah, Roslan (2009) Study On The Parametters Effect Of Tool Wear For Different Cutting Tool In Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wan Ahmad Shahir , Wan Musa (2009) Assessment of Wire EDM Parameters on Aluminum. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yean , Fook Cheng (2009) Effect Of Nanofiller (Pristine Montmorillonite And Hydrotalcite Lamellar Clays) Of Corrosion Activities On Paint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yee , Jia Huea (2009) Investigation Of Surface Roughness Between The Conventional And Climb Milling For Aluminum Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zabidi , Ibrahim (2009) An Experiment Study Of The Effect Of Feed Rate On Turning Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zalina , Abu Lukman (2009) Robot Comau Programming For Complex Path. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zariah, Zainudin (2009) The Study On The Effects Of Cutting Parameters In Near End Cutting Speed Normal Range Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulfadhli, Idrus (2009) Laser Cutting Of Woods. Project Report. UTeM, Melaka, Malaysia. (Submitted)