Items where Division is "Library > Final Year Project > FKM" and Year is 2020

A

Abdul Aziz, Mohamad Adib (2020) Optimal Design For Production Of Green Diesel From Integrated Oil Palm Biomass Derived Alcohols Bio-Refinery. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Mohd Firdaus (2020) Mechanical Properties Of Specimens 3D-Printed Recycled Polylactic Acid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Nasir, Muhammad Asif Asyraf (2020) Development Of A Machine To Assist Wheelchair Users To Board A Bus. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Aina Athira (2020) Effect Of Valve Flow Coefficient (Cv) To The Propulsion System Of Hydro-Pneumatic Hybrid Driveline. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Siti Amirah (2020) Effect Of Various Temperature On Graphene Based Conductive Ink. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Bakri (2020) The Enhancement Of Composite Phase Change Material Towards Thermo-Physical Properties Using Nanoparticle For Thermal Energy Storage. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Salim, Muhammad Ikramullah (2020) Mechanical Properties Investigation Of 3D Printed Parts Under The Exclusion Of Oxygen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ambran, Muhammad Abid Muttaqin (2020) Evaluation Of Slit Parameter Of Ferromagnetic Material Based On Magnetic Flux Leakage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Hamzah, Nur Aqila Syamimi (2020) Tribological Performance Of Grease With Different Types Of Additives. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arshad, Muhammad Amin (2020) Evaluation Of Vehicle Lane Keeping Assistance (LKA) And Lane Departure Warning (LDW) System For Advanced Driver Assistance System (ADAS) Technology Under Malaysian Environment Conditions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arumugam, Thineswary (2020) Centralized Air Condition System’s Coefficient Of Performance And Relations With Energy Usage At Laman Hikmah Library UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Baskaran, Roshini (2020) Design And Analysis Of Automated Whiteboard Cleaner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Chin, Kah Chun (2020) Degradation Behaviour Of O-Ring Elastomer Subjected To Palm Biodiesel Immersion. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chou, Aw Lin (2020) Heat Transfer Enhancement Through The Use Of Vortex Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

E

Elangkovan, Thamarai Vathani (2020) Post Occupancy Evaluation (POE) And Indoor Environmental Quality (IEQ) Assessment: A Case Study Of UTeM’s Technology Campus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Faizal Edzuan, Edzzry Indrawan (2020) CFD Study Of An Oscillatory Flow Across Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong, Yee Pin (2020) CFD Modelling Of Automotive Aerodynamics Effect Of Afterbody Rounding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hasbullah, Nurjannah (2020) Numerical Study On Ship Motion With LNG Tank Sloshing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hii, Ding Fung (2020) Design And Development Of Rainwater Conservation System For Application In School. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hooi, Man Poh (2020) Fatigue Crack Detection In Aluminium Pipe By Using Non-Linear Vibro Acoustic Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hosnie, Aina Natasha (2020) A Study Of Percolation Threshold On Graphene Conductive Ink Filled Resin Epoxy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussin, Hazwan (2020) Modelling And Simulation Of Lane Keeping Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Ismail, Mohamad Zaki (2020) Ergonomic Assessment For Classroom Design In FKM UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kamarul' Arifin, Iffah Syakirah (2020) Design And Analysis Of Bending And Stretchable Testing Apparatus For Conductive Ink. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lee, Voon Hui (2020) Mini Wave Energy Harvesting Test Rig Using Multiple Solenoid Magnets. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Boon Hong (2020) Effect Of Vortex Generator On Blood Flow Characteristic On Idealized Prosthetic Heart Valve. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Heng Yang (2020) CFD Modelling Of Building Ventilation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Shern Tien (2020) Active Tuning Of Dynamic Vibration Absorber (DVA) For Suppresing Structural Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

Mamat, Mohammad Faisal (2020) Finite Element Analysis Of An Independent Steering System For A Pendular Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mansor, Muhammad Hilmi (2020) Gear Failure Analysis And Health Monitoring Plan On The Mechanical Component Of An Amusement Park Equipment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Azman, Muhammad Syahrol Nizam (2020) Optimization Of Tribo-Performance Of 3D-Printed ABS With Internal Structure Formation For Production Of Automotive Bearing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Zain, Muhammad Farisi (2020) Ergonomic Design Of Walking Chair For Disable Children In The Classroom. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Wazir, Azmil Arif (2020) Design And Development Of A Low-Cost Cyclone Dust Collector System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ariff, Siti Zaharah (2020) Optimization Of Tribo-Performance Of Oil-Impregnated Palm Kernel Activated Carbon For The Production Of Automotive Bearing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Dzahari, Adib Aizat (2020) Design And Fabrication Of Tensile Test Specimen Cutting Equipment For Elastomer Compatibility Study Subjected To Palm-Oil Based Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fizal, Nursyasya Amanina (2020) Effect Of Vortex Generator On Blood Flow Characteristic On Real Patient Specific Data. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanafiah, Muhammad Harzelan (2020) Tensile Properties Of Graphene Nanoplatelet Reinforced Ultra-High Molecular Weight Polyethylene Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jamaluddin, Muhammad Al-Faaruuq (2020) Effect Of Biodiesel Concentrations On Swelling Properties Of Polymer Based O-Ring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Muhammad Hilmi (2020) Structural Sustainability Study For Production Of Advanced Biofuels From Integrated Oil Palm Biomass Biorefinery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazri, Muhammad Nazhiim (2020) Development And Construction Of A Small-Scale Wind Tunnel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

N

Narasimmanaidu, Satishwara Rao (2020) Numerical Study On A Partially Filled Channel With Open-Cell Metal Foam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Angie (2020) Conceptual Design Of A Kitchen Food Waste Composter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Othman, Megat Muhammad Haziq (2020) Railway Vehicle Maintenance Transformer Oils’ Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Othman, Mohd Dzul Fazley (2020) Effect Of Hybridization On The Functional Properties Of Nanocarbon-Based Electrically Conductive Adhesive (ECA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Shahruldin (2020) Centralized Air Conditioning System Coefficient Of Performance Of Office Building. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

P

Phua, Hou Jie (2020) Effect Of Carbon Black Loading On The Properties Of Graphite – Epoxy Composite For Flow Channel Fabrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Pranjes, Joeshua Michael (2020) Assesment Of Thermal Comfort And Indoor Air Quality In The Refurbished Academic Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Purusothma Naido, Logan Naidu (2020) A Simulation Study Of Domestic Hot Water Using TRNSYS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Rajasegaran, Sobanraj (2020) Response Of Fibre Metal Laminate Under Low Velocity Impact. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramankutti, Suriya Priyaan (2020) Study On The Effect Of Local Cooling On People With Different Types Of Sleeping Posture. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rasid, Raziman (2020) Optimization Of Physiochemical Properties For Cleaner Diesel With Alcohol From Oil Palm Biomass As Additive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S

Saad Azam, Nurfarah Nabila (2020) Investigation Of Vehicle Spoiler Aerodynamics With Plasma Actuator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salahuddin, Muhamad Zhafrie (2020) A Comparative Study Of Mechanical And Thermal Conductivity Properties Of An Insulation Particleboard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sa’at, Muhammad Bazley (2020) Optimum Scheduling Of Energy – Intensive Compressor Network Under Regulated Electricity Tariff. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Seladorai, Turkeswaran (2020) Design, Simulation And Analysis Of Climbing Trolley. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shukmi, Muhammad Alif (2020) Optimum Planning Of Air Compressors Network Under Different Electricity Tariffs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulayan, Nur Syafiqah (2020) The Mechanical Properties Of Paddy-Husk Polypropylene Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

T

Tan, Jia Wei (2020) Conceptual Design Of The Crutches Using TRIZ-Biomimetics Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wong, Shin Fhui (2020) A Study Of Drying Chamber Integrated With Solar Collector Using Computational Fluid Dynamics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yeow, Yee Sin (2020) CFD Modelling Of Led Heat Sink: Geometric Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yew, Sin Wei (2020) Design And Development Of Large-Scale Size 3D Printer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zaharin, Muhammad Naiem Naqiuddin (2020) Development Of A Risk Based Inspection (RBI) Software For An Integrated Explosion-Inspection Compliance Services (Industry Demand Project). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkiply, Fariz (2020) Experimental Analysis Of Lubrication Of B30 Biodiesel For Fuel Injector System. Project Report. UTeM, Melaka, Malaysia. (Submitted)