A Study The Effectiveness Of Fitness Testing In Pressure Vessel Fabrication Industry

Ruzzana Aida , Mohd Ramin (2006) A Study The Effectiveness Of Fitness Testing In Pressure Vessel Fabrication Industry. Project Report. Melaka, Malaysia, UTeM. (Submitted)

	PDF (24 Pages) A_Study_The_Effectiveness_Of_Fitness_Testing_In_Pressure_Vessel_Fabrication_Industry_-_Ruzzana_Aida_Mohd_Ramin_-_TS283.R89_2006_24_Pages.pdf - Submitted Version Download (1MB)
	PDF (Full Text) A_Study_The_Effectiveness_Of_Fitness_Testing_In_Pressure_Vessel_Fabrication_Industry_-_Ruzzana_Aida_Mohd_Ramin_-_TS283.R89_2006.pdf - Submitted Version Restricted to Registered users only Download (8MB)

Abstract

Vessels and tanks that cany, store or receive fluids are called pressure vessel. Pressure vessel has been designed to operate at pressures greater than normal (generally above 15 p.s.i.g). It means that the inside pressure of pressure vessel is higher than outside pressure of pressure vessel. Pressure vessel often has a combination of high pressures together with high temperature. It should be borne in mind that the rupture of a pressure vessel has a potential to cause extensive physical injury and property damage. Testing is an important factors to avoid injury or damage in pressure vessel because the testing can detect the defects that appear while fabrication process done. The types of testing that always applied in industry are Dye Penetrant Testing, Magnetic Particle Testing, Radiographic Testing, Ultrasonic Testing and Visual Inspection. The effectiveness of these testing will be measured by its widely applied or used in industrial and its applicable. The evaluation of effectiveness these testing based on the data collection about Inspection and Test Plan that collected from industrial by showing it in rating table. Dye Penetrant Testing and Magnetic Particle Testing are most effectiveness testing that applied in industry rather than other inspection and testing because of their widely applied to test joining parts and their applicable to test any joints, any materials with different thickness. Both of these testing will be done at normal temperature and conditions without required Level IT and above personnel technicians to do the testing.

Actions (login required)

View Item