Study The Parameter Optimization In The Injection Molding

Suhaila , Yacob (2007) Study The Parameter Optimization In The Injection Molding. Project Report. Melaka, Malaysia, UTeM. (Submitted)

	PDF (24 Pages) Study_The_Parameter_Optimization_In_The_Injection_Molding_-_Suhaila_bt_Yacob_-_TP1150.S93_2007_24_Pages.pdf - Submitted Version Download (1MB)
	PDF (Full Text) Study_The_Parameter_Optimization_In_The_Injection_Molding_-_Suhaila_bt_Yacob_-_TP1150.S93_2007.pdf - Submitted Version Restricted to Registered users only Download (15MB)

Abstract

This project describes about the study of the parameter optimization using the design of experiment (DOE) by using the method two factorial designs. DOE using 2k factorial design for obtain the parameter optimum of the plastic container product by using the polypropylene as the material. For achieve optill)ization that a few objecti es have been used on this project reach to find out the optimum parameters of pressure in plastic injection moulding the rea l si tuation. to understand the parameters rel ationship the injection moulding process. to optimum the parameters of injection pressure. holding pressure, back pressure and clamping pressure and to product plastic product without defect. In thi s study the Arburg-420C injection moulding machine and mould of container are use to find out the parameters involve for producing a product plastic container .The parameters involve injection pressure. holding pressure. back pressure and clamping pressure were I be identified . Then Polypropylene material was be used in thi s study which they are difTerent in term of viscosity. density and melt flow index. The problem faced which the optimum data parameter was be documented until no defect tound at the plastic product. I he purpose 0 1 this project IS to study about the parameters of pressure such as clamping pressure. back pressure. holding pressure and injection pressure that use in the inj ection moulding process. The optimum parameter is important because they related in produce product without defects such as short mOUlding. nashing and others. By this project found out the result of product and obtain the optimum parameter and success ful produce the good product by kno, ledge and skill in setting the condition of parameter.

Actions (login required)

View Item