Simulation And Control Of Water Tank System Using LabVIEW And Automation Studio

Alwi, Zulkefli (2009) Simulation And Control Of Water Tank System Using LabVIEW And Automation Studio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) alwi_b_zulkifli_24_Ppages.pdf - Submitted Version Download (8MB)
	PDF (Full Text) alwi_b_zulkifli_fulltext.pdf - Submitted Version Restricted to Registered users only Download (56MB)

Abstract

This project name is "Simulation and Control of Water Tank System Using Lab VIEW and Automation Studio". Simulation of water tank control using two program simulations software such as Lab VIEW 8.5.1 and Automation Studio 5.0. For Lab VIEW simulation, it is using the PID controller to pump water and to maintain water level in the tank. PID controller has ability to measure water level in the tank at required value. In industry, this situation is important especially in industry process and application. Many case in industry occur when the function controller to control water in the tank it not function as well. The type of PID controller using in this project exactly aim for system feedback. The operation of PID controller function when the pump gets the signal from controller, pump will operate and inhale the water into the tank at the desired setpoint. The pump will automatically stop operation when water level reaches the setpoint (maximum) value and will function again when the water level reach at minimum level of setpoint. Second one is simulation by using PLC controller software. The function is same like LabVIEW to control the water level in the tank so the differential only is more based on the control mechanical part component like actuator, valve, pump, relay, coil and others like the same function in control application such as water tank controller in industry.

Actions (login required)

View Item