The study of flank wear using uncoated boron steel (22MnB5) on aluminium (AA6061)

Shariff, Anis Sabirah (2019) The study of flank wear using uncoated boron steel (22MnB5) on aluminium (AA6061). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

	Text (24 Pages) The Study Of Flank Wear Using Uncoated Boron Steel (22MnB5) On Aluminium (AA6061).pdf - Submitted Version Download (273kB)
	Text (Full Text) The study of flank wear using uncoated boron steel (22MnB5) on aluminium (AA6061).pdf - Submitted Version Restricted to Registered users only Download (3MB)

Abstract

This project was carry out to study the flank wear using uncoated boron steel on aluminium. CNC turning machine was used to run the machining process of the boron cutting tool with coated and uncoated insert. This experiment is focus more detail on the boron cutting tool insert. The factor that should be consider on the machining are spindle speed, depth of cut and feed rate. The spindle speed that have been chosen are 100m/min, 200m/min and 300m/min and for the depth of cut and feed rate is constant at 0.5mm, 0.10mm/min. The material of the specimen that had been used is Aluminium AA 6061.The aim of this project is to study the flank wear of the boron insert. Then, there are several testing conducted on this project such as Scanning Electron Microscopy (SEM), Tribology, X-Ray Diffraction and Digital Microscopy. After that, the data can be obtained by the testing.

Actions (login required)

View Item