Design and analysis of the optimum gate size for single cavity plastic name card holder injection mold

Arzmi, Muhammad Syafiq (2015) Design and analysis of the optimum gate size for single cavity plastic name card holder injection mold. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

	Text (24 Pages) Design And Analysis Of The Optimum Gate Size For Single Cavity Plastic Name Card Holder Injection Mold 24 Pages.pdf - Submitted Version Download (569kB)
	Text (Full Text) Design and Analysis of The Optimum Gate Size for Single Cavity Plastic Name Card Holder Injection Mold.pdf - Submitted Version Restricted to Repository staff only Download (2MB)

Abstract

This final year project entitled, “Design and Analysis of the Optimum Gate Size for A Single Cavity Plastic Name Card Holder Injection Mold”. The project focused on the design and analysis of a simple cavity Plastic Name Card Holder. The design of the Name Card Holder was designed by using SolidWorks and CATIA software and the analysis of the Name Card Holder was analyzed by using Autodesk Simulation Moldflow Adviser 2014 software. The material used for the Plastic Name Card Holder is Polypropylene (PP), Polyethylene (PE), Acrylonitrile-butadiene-styrene (ABS) and High Density Polyethylene (HDPE). This project started by measuring the dimension of the actual size of the Plastic Name Card Holder. After that, a 3D drawing was created by using SolidWorks and CATIA software. Autodesk Simulation Moldflow Adviser 2014 analysis was conducted to determine the optimum gate size of the Plastic Name Card Holder mold. The optimum gate size of the Plastic Name Card Holder mold has been selected based on the results of force analysis obtained. After the analysis was done, the resulted shown the optimum gate size is 1 mm x 3 mm x 1 mm and the best material is Polypropylene (PP)

Actions (login required)

View Item