Design And Analysis Of Turbocharger By Casting Technology

Salmie Suhana, Saad (2010) Design And Analysis Of Turbocharger By Casting Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 pages) Design_And_Analysis_Of_Turbocharger_By_Casting_Technology_-_24_pages.pdf - Submitted Version Download (184kB)
	PDF (Full Text) Design_And_Analysis_Of_Turbocharger_By_Casting_Technology_-_Full_Text.pdf - Submitted Version Restricted to Registered users only Download (6MB)

Abstract

This project presents the design and analysis of turbocharger by using casting technology. The objectives of this project are investigating the design parameters of turbocharger in turbine-compressor assembly by casting technology and to propose a design of compressor in turbine-compressor assembly. This project was used the Metal Matrix Composite (MMC) material. The main material was used in this project is Aluminium Silicon Carbide. Aluminium alloy as a matrix material and SiO2 quartz as a particulate reinforce added in different percentage. The analysis of the parameters of temperature, pressure, and static structural were presented by using simulation tools. Based on the simulation result, the composition of 85.95% Aluminium and 11%of Silicon Carbide was proposed to improve the turbocharger design in turbine-compressor assembly. An investment casting technique is recommended for producing the turbocharger due to the high complexity with tight tolerances to meet the highest performance standard. In addition, design parameters and technical specification in designing of new compressor assembly were proposed. As a result, a new compressor design in turbine – compressor assembly was developed.

Actions (login required)

View Item