An Automated Synchronizing System For Electrical Machine Laboratory (Part 2)

Norhaisam, Ismail (2007) An Automated Synchronizing System For Electrical Machine Laboratory (Part 2). Project Report. UTeM, Melaka, Malaysia. (Submitted)

	PDF (24 Pages) An_Automated_Synchronizing_System_For_Electrical_Machine_Laboratory_(Part_2)_Norhaisam_Bin_Ismail_24_Page.pdf - Submitted Version Download (3MB)
	PDF (Full Text) An_Automated_Synchronizing_System_For_Electrical_Machine_Laboratory_(Part_2)_Norhaisam_Bin_Ismail.pdf - Submitted Version Restricted to Registered users only Download (22MB)

Abstract

"An Automated Synchronizing System For Electrical Machine Laboratory (Part 2)" project starts with learning all the process in this project and focusing more about Vrms, phase difference and signal conditioning. At the same time, this project will also help student for deeper understand about the synchronizing requirement for the 3-phase synchronous system and able to observe in real time reading for the frequency waveform, phase sequence, Vrms, phase difference another synchronization phenomena Actually, this project is divided in two parts which are hardware development and software development. Signal conditioning is also used to obtain the suitable output which to be connected to input of data acquisition card (DAQ). For the software part, Lab VIEW software is used to program and display the output (result) virtually on the computer and control the system. And it also able to trigger the hardware synchronous switch to turn on once the systems achieve the synchronization requirement. In addition, this project consists of synchronous generator and DC motor as the prime mover. As a final result, this project is expected to be an important exposure to the student on the conditions required for the synchronisation process.

Actions (login required)

View Item