Items where Division is "Library > Final Year Project > FTKMP" and Year is 2023

A

A P Rajan, Sivanesshvar (2023) Human head measurement study using kinect camera with three dimension cad software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Zul Hairi (2023) Monitoring maintenance of motorcycle servicing schedule. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Hamid, Syahrulnaim (2023) Investigation the effects of heat treatment on mechanical properties and microstructure of low carbon steel joint with ER70s filler metal. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Jafar, Nurul Syuhadah (2023) Real-time water quality monitoring using IoT near brackish water area in Sungai Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Nur Ayuni Shahirah (2023) A study on the effect of cutting temperature during milling operation of CFRP material utilizing various tool geometrical design; Router/burr tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adenan, Nur Solihah (2023) Study of vibration on defects in cordless impact hand drill using statistical analysis method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adrin, Davian Ivan (2023) Development of HYDROQS detachable mini portable conveyor – Structure and lifting mechanism. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Afandi, Nurul Fahimah (2023) Structural integrity assessment of cable structure : From laboratory to industry. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad, Muhammad Fauzani (2023) Human hand measurement study using three- dimensional camera (3D) anthropometry system with 3D CAD application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Nur Farah Farizah (2023) Improvement on current wheelbarrow (Wheelbarow-OnThe-Go). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Daud, Fatin Farhana (2023) Mechanical and physical properties of glass waste mixture in concrete. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Hesamuddin, Ahmad Farouq (2023) Bathymetric study at Malacca river (Taman Rumpun Bahagia) using compressed high-intensity radiated pulse device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Siaman, Muhamad Afiq Hakimi (2023) An analysis on energy consumption of injection moulding process using neural network. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Sidik, Laili (2023) Design and development of smart home post box. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Zubir, Muhammad Abu Huzaifah (2023) Effect of pulse on the surface properties of mild steel using TIG torch process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Zubir, Muhammad Abu Huzaifah (2023) Effect of pulse on the surface properties of mild steel using TIG torch process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Zulkafli, Muhammad Hazim (2023) Development of phase change material (PCM) wallboard for building passive cooling applications. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ali, Mohd Khairulfadzlee (2023) Evaluating electric boat with inboard engine for houseboat vessel. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Alias, Nabil Aiman (2023) Determination of background indoor air pollutants and thermal comfort in Faculty of Mechanical and Manufacturing Engineering Technology, UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aminuddin, Mohd Saiful Aiman (2023) Signal detection for gear defect of pump system using signal analysis of data acquisition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amran, Ammar Syafi (2023) Design and analysis of low-cost twin-screw filament extruder. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Amran, Muhamad Syariz Syazwan (2023) Effect of B20 and B30 palm oil biodiesel on performance and exhaust emission of a diesel engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Asmadi, Mohamad Nur Ikhmal (2023) Comparative study on the effectiveness of cementitious and elastomeric waterproofing materials to comply with ASTM D5957. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Asri, Mohd Aidil Iman (2023) Development of biodegradable mat from cassava starch and coconut fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azlan, Norsabrina (2023) The mechanical properties of 7075 Al-T6 cold sprayed with 6065 aluminum powder. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azman, Mohamad Afiq (2023) Effect of B10 and B100 palm oil biodiesel on performance and exhaust emissions of a diesel engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Mohamad Izmul Fareez (2023) Shelter based design method of a lightweight and portable by using coconut fiber reinforced polypropylene (PP) honeycomb panel for typical. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azmi, Muhamad Izwan Aiman (2023) Experimental study on thermal conductivity performance of oil palm fiberpolyester panel with aluminum honeycomb sandwich. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

B

Baharuddin, Muhamad Haziq (2023) Study on rainwater effect on mechanical properties of ageing FS3300PA SLS material with different coating conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahruddin, Nur Farhin (2023) Through user requirement to design wheelchair improvement by integrated QFD, AHP and TRIZ method. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Balu, Kaartik (2023) Effect of surrounding temperature to tensile strength of polyvinyl alcohol (PVA) nanofibers structures. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Borhan, Muhammad Afif (2023) Automatic radio frequency identification gate system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Chan, Sok Er (2023) Study of vibration on machinery faults in shaft using statistical analysis method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Abd Razak, Nur Liyana Syahirah (2023) The investigation of environmental sustainability on industry 4.0 readiness considering Malaysia cultural preference. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Che Hamdan, Muhammad Arif Farhan (2023) Signal detection for centrifugal pump using signal analysis of data acquisition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Ibrahim, Noraiman Naim (2023) Square ventilation air duct modelling and validation and the effect of angle change using variable air flow. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Che Mohd Nasir, Nurul A’tiqah (2023) Effect of cold chamber parameter on the gas flow in thermal transpiration pump. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Saidi, Muhammad Syarifuddin (2023) Application quality functional deployment model in form features and Kansei vocabularies for masjid chair design. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Chew, Jun Kai (2023) Performance of local exhaust ventilation (LEV) using computational fluid dynamics (CFD) based on motor pulley adjustment of fan law. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

D

Dandai, Mohd Zahede (2023) An exploratory design project utilising the infinitive qualitative design method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dulah Aspa, Muhammad Luqman Nulhakim (2023) Surface modification of mild steel using alumina powder ceramic particles and TIG torch welding. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

E

Esmadee, Shahrul Akmal (2023) Design for assembly analysis for newly developed 3D router machine. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

F

Fadzil, Muhammad Arif Izzuddin (2023) Three dimensional computer aided design application in upper body measurement study using kinect camera. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

G

Ganasan, Logentharan (2023) A study of the microstructure properties of cold sprayed 6061 Al on 7075-T6 aluminum. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ghazali, Syazrien Effendi (2023) The investigation of virtual reality (VR) tool performance for 3D design visualization considering cultural preferences. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

H

Halim, Mohd Hafizi (2023) Study on the effect of MAPE on the 3D printing filament properties made from wood dust/recycle pp composite (R-WOPPC). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Henry, Wellden (2023) Experimental analysis on mechanical properties of coconut leaf reinforced polyester resin. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

I

Ibrahim, Mohamad Amir (2023) Development and testing of airflow resistivity system for an acoustic material with rapid prototyping. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Muhamad Aiman (2023) Maintenance strategy deployment of HVAC semi hermetic compressor using failure mode effect analysis process (FMEA) method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ibrahim, Muhammad Zarif (2023) Effect of porous structure parameter on the gas flow in the thermal transpiration pump. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Indrawaty, Mohamad Irfan (2023) Thermal analysis of sugarcane fiber/pol vester aluminium honeycomb panel for hot humid climate application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ishak, Muhammad Asyraf (2023) Improving the effectiveness of production quality by applying planned maintenance in manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ishak, Nurul Nadhirah (2023) Real-time water quality monitoring using IoT near saltwater area in Sungai Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Siti Khadijah (2023) Overall labour efficiency improvement using Maynard operational sequence technique at SME aerospace manufacturing company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

J

Jamaludin, Ahmad Zairy (2023) Development of 3D model and bathymetry contour maps for Sungai Melaka using surfer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Javahar, Yasasvini Satkreetaa (2023) Increase production capacity by applying single minutes exchange of die in manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ja’afar Husni, Muhammad Nizamuddin (2023) The study of physical and environmental characterization of sago starch mixture with glycerol. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Jokdin, Muhammad `Ifwat Wafiuddin (2023) Study of vibration on motorcycle brake system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

K

Kalana, Siti Masbah (2023) Mechanical properties and failure analyses of Bemban fiber reinforced thermoplastic starch matrix composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kasri, Nur Shuhada (2023) A compact and low cost online flood level monitoring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairul Anuar, Muhamad Haziq (2023) Preventive monitoring of car air conditioning system under scheduled maintenance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairul Hamedy, Nurul Khayrun Niesya (2023) Online fan blade monitoring using wireless instrumentation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Lasemin, Shahrul Helmi (2023) The effect of microstructure onto er308l Si WAAM structure using inoculant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lazarus, Moses Lian (2023) Evaluating electric boat with inboard engine for fishing vessel. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Lim, Thian Mee (2023) Synthesis, optical and semiconductor characterization of molybdenum diselenide (MoSe2) thin films. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ling, Jing Seng (2023) A study of end-of-life vehicle preferable parts for auto service workshop. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M

Maidan Al Hadri, Muhammad Albaihaqqi (2023) Performance of open-cell foam heat exchanger under various operating condition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Manap, Nur Ain Najwa (2023) Increase production capacity by performing assembly line balancing study in food and beverages manufacturing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mansor, Muhammad Hazim (2023) Performance enhancement of mini thermoelectric refrigerator by using thermoelectric module cooled with paraffin phase change material (PCM) heat sink. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mat Nasir, Mohamad Afiq Danial (2023) Finite element modelling study on delamination behavior of composite material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Rozi, Muhammad Ibnur Ameerul (2023) Design analysis of the X-axis assembly of a newly developed 3D router machine using finite element analysis. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mazlan, Muhamad Khuzairi (2023) Maintenance strategy deployment of HVAC semi hermetic compressor using analytical hierarchy process AHP method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Isa, Nur Sarah Farisya (2023) To improve the crutches design from the existing prototype. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Md Noor, Muhamad Amzar (2023) Product design and analysis of automatic motorized cat feeder for large cage sizes. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Md Noor, Muhammad Akmal (2023) Indoor air quality and respiratory health among academic staffs in department of Mechanical Engineering Technology, UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Saad, Nur Fatin Izzati (2023) Response surface methodology on the selection of natural fiber properties in the sound absorption coefficient. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Sharin, Batrisyia Nur Saadah (2023) Development of mammals tank feeders of pallet type diet for eight days. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Md. Akhir, Muhammad Syafiq (2023) Preparation and characterization of linseed/tung oil-filled urea–formaldehyde microcapsules and their effect on mechanical properties of an epoxy-based coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Fazdhli, Fawzan Hanafi (2023) Improvement design and testing of a rapid advance future (RAF) prosthetic lightweight leg. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Noh, Mohamad Azahar (2023) Development of low-cost vehicle motion module in longitudinal direction using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Sofi, Muhammad Ayyub (2023) Alteration of copper surface by using laser engraving process for deep pattern marking. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Zahir, Wafa Izzati (2023) Reproduction of batik pattern using reverse engineering for heritage preservation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Bakri, Muhamad Firdaus (2023) Development and structure analysis for trendy scooter using recyclable material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Isa, Muhammad Fizwan Hakimi (2023) Development of IoT-enabled real time machine status monitoring approach for cloud manufacturing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Adnin, Muhammad Iqmal (2023) Analysis of chemicals elements on treated waste cooking oil for the organic crayons. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Fauzi, Muhammad Faiz Hakim (2023) Design and fabrication of multi-purpose chair with an ironing board and storage compartment. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Fuzi, Muhammad Hafiqh Hakimi (2023) Development and characterization on physical and environmental of pineapple leaf fibre reinforced thermoplastics sago starch composite. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Kasim, Muhamad Syazwan Zulhilmi (2023) Characterization and mechanical properties of porous ceramics with different polymethyl metacrylate (PMMA) contents. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Nizam, Nur Aqilah (2023) Ergonomic design of crayons using 3D printing mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ramli, Muhammad Amin Shafiq (2023) Simulation and application of nature fiber/polyester aluminum honeycomb for thermal analysis for Malaysian shelter application. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Rizal, Nurul Qadriyah (2023) Development of precision farming irrigation and fertigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Supian, Nur Amira Zulaikha (2023) Design and fabrication eco friendly 3D printed bicycle cup holder. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zaki, Muhammad Danial (2023) Feasibility study of product material characterization (nylon PA12) under high heat environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mokhtar, Muhammad Izzuddin (2023) Study on indoor air quality and sick building syndrome in academic building in Faculty of Mehcanical and Manufacturing Engineering Technology, University Technical Malaysia Malacca. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mualip, Muhammad Syahmi (2023) Compliance of air contaminants within the main prayer hall of Masjid Sayyidina Abu Bakar UTeM, Melaka with Malaysia’s indoor air quality standard. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad, Ahmad Abdullah (2023) Study on driver behaviour in pre-crash scenario involving pedestrian and motorcycle by using UC win road software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

N

Nik Ahmad Khan, Nik Ahmad Nazran (2023) Development of batik jig for heritage preservation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Yatim, Natra Fathira (2023) Mechanical properties and failure analyses of Bemban fiber reinforced thermosets matrix composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norazmi, Mohamad Akmal Hakimi (2023) Comprehensive study on selective laser sintering 3D printer polyamide 12 recycle composition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norman, Muhammad Adib (2023) Design improvement and analysis of Malacca river cleaning boat. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

R

Raja Mohan, Navanesan (2023) Online machine vibration monitoring system using wireless instrumentation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ratha, Sivapriya (2023) Intermetallic compound at copper wire- aluminum bond Pad interface in thermosonic wire bonding. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Razali, Siti Fasihah (2023) Application of Kansei vocabulary on development of the parametric product form design for customer oriented requirements. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Roslan, Muhammad Fikri (2023) Investigation the effect of printing parameter on physical properties of 3D printed PLASPF composite. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Roslan, Nor Shairah Hanis (2023) Design development of a mobility modular water filtration system for flood victims. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Muhammad Akmal Daniel (2023) Mechanical properties of hybrid composite consist of wood dust, copper wire and reinforced with polyester resin. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roslin, Muhammad Iqmal Hakim (2023) The design and development of a pineapple planter machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosman Rizal, Muhammad Mustaqim (2023) Preparation of cement mortar wall incorporated with coconut oilparaffin eutectic phase change materials (PCM) for buildings passive cooling applications. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Rozlan, Muhamad Irfan Asyraf (2023) Development and characterization on mechanical of pineapple leaf fibre reinforced thermoplastics sago starch composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rukunuthin, Mohamad Tajudin (2023) Development of blind spot system for truck. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ruzi, Nuur Atiqah (2023) Design and development of UFO (used frying oil) bin prototype. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S

Saadon, Damia Syahirah (2023) Conceptual design of self-organised USB Charger cable by using TRIZ method. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Sabardan, Muhamad Mahfiz (2023) Machinability study of roughing machining strategies for pocketing features of an aerospace. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saleh, Nor Azureen (2023) Design and development of motorcycle rotated stand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Salleh, Mohamad Izzat (2023) Characterization and mechanical properties of porous ceramics with different mixture of carbon black (CB) and polymethyl metacrylate (PMMA) contents. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Samsudin, Muhammad Shafiq (2023) Development of alcohol and driver seat detection system with driver window opening. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shaari, Muhamad Hariez (2023) Characterization and mechanical properties of tin dioxide reinforced natural rubber for electrical insulators. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shaharuddin, Muhammad Afif (2023) Real-time water quality monitoring using IoT near fresh water area in Sungai Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shahidan, Muhammad Shahid Amil (2023) Design study of server workstation’s case for heat flow distribution. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Shanmugam, Tinish (2023) Investigation of mechanical and physical properties of concrete brick made of waste materials. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shea, Yu Xiang (2023) Prioritizing weighting criteria in ASEAN NCAP rating assessment by using the analytic hierarchy process (AHP): Industry and policy maker perception. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Somasundram, Subramaniam (2023) A study on end-of-life vehicle for used part dealers: Proton Wira case study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Subramaniam, Mugilarasan (2023) Validation of stress concentration factor in perforated plates using finite element software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suhaimi, Muhammad Haziq (2023) The design and development of pineapple planting mechanism. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Sulaiman, Siti Nurul Ain (2023) Optimize product delivery process by using value stream mapping in manufacturing industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

T

Tee, Kuo Chun (2023) Study on microstructure and mechanical properties of quenching AZ31B in nano-fluid. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tsai, Ho Fung (2023) Synthesis and structural characterization of molybdenum chalcogenide thin films. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

U

Ujan, Carlvin Berasap (2023) Emission controlled burning system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ujih, Aenderson Chaong (2023) An investigation of the effectiveness of the MAPP compatibiliser on the 3D printing filament properties made from wood dust/recycled pp composite (r-WOPPC). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

V

Vejaya Kumar, Ejay Kumar (2023) Study the material of fishing rod and their stiffness and elasticity strength using bending test. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

W

W Ishak, Wan Muhammad Sulaimi (2023) Effects of heat treatment on non-dendritic grains microstructure and mechanical properties of A356 alloy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Ahmad Salahuddin, Wan Ahmad Syakir (2023) Thermal comfort of air-conditioned office through different windows -door opening arrangements at JTKM'S academic staff at F3, Teknology Campus, UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Samsuddin, Wan Muhammad Aqil (2023) Prototyping of new roof cooling system through thermofluid concept for energy optimization and environmental conservations. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wira, Muhammad Aiman Haiqal (2023) Thermal comfort study on baby stroller using fan with fabric duct as air distribution method. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Wong, Khen Peng (2023) Evaluating electric boat with inboard jet propulsion for patrol vessel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Vincent Yew Ming (2023) Design and fabrication of transmission trainer kit for continuously variable transmission (CVT) transmission. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Y

Yunadi, Nazirah Aqilah (2023) Investigation of corrosion rate of AISI 316l stainless steel in Malaysian tropical fruit juice environment using factorial experimental design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yusoff, Yusra Fitri (2023) Study of 3D printing filament made from recycle polypropylene (PP) and ground tyre rubber (GTR) treated with NaOH. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Z

Zaiham, Nur Afiqah Aina (2023) Development of airflow resistivity system with rapid prototyping and Arduino configuration. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainal, Muhammad Hamizan (2023) Environmental assessment of design of biodegradable food packaging. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Zainol, Ahmad Nazril Hasan (2023) Development of portable vehicle noise pressure level monitoring system. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Zainurin, Nurul Shahida Akila (2023) Product design and analysis of walker using IoT. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Zakaria, Mohd Nazrin (2023) Environmental impact assessment of the milling process on CNC 3D router. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zam Azri, Muhammad Adib Hakimi (2023) Development of monitoring performance tools for Local Exhaust Ventilation (LEV) system. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Zol Nadzruddin, Muhamad Ammar Baqir (2023) Characterization and mechanical properties of porous ceramics with different carbon black contents. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkiflee, Muhammad Luqman Haziq (2023) Optimizing air flow distribution of three non-air-conditioned pre-school at Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Muhammad Hasif (2023) Comparative studies of Tung and linseed oil microcapsule as self-healing coating for corrosion protection of low carbon steel substrates. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)