Items where Division is "Library > Final Year Project > FTKMP" and Year is 2022

A

Ab Radzak, Nur Aliya Alina (2022) The effect of heat treatment on mechanical properties and microstructure of low carbon steel welded joint with ER70s filler metal. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abang Abdul Razak, Dayang Ma’asitah (2022) Mechanical properties and failure analysis of Bemban fibre reinforced thermoplastic matrix composite. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abd Halim, Muhammad Firdaus (2022) Effectiveness of portable eddy current inspection on welding pipeline. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Latiff, Anas Naufal (2022) Comprehensive study on selective laser sintering 3D printer polyamide 12 recycle parameter and dimension measurement accuracy effect on maintenance application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd. Halim, Ahmad Bukhari (2022) Automatic assembly fault detection system using machine vision method and transfer learning. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Abdul Haqim (2022) Design and development of portable ablution product for motorcyclist. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Farihah Awatif (2022) Investigating the mechanical performance of the new green concrete product. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abdul Jalil, Ikhmal Hakimi (2022) Development of grabber structure of small scale ROV for education purposes. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Ika Eliyana (2022) Characterization on the new fired unglazed roof tiles waste products as fine aggregate in concrete. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Abdul Rahim, Muhammad Nazreen (2022) Development of emergency brake for underbone motorcycle (below 150CC engine capacity). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Wahid, Muhammad Ja’far As-Shadiq (2022) Vibration analysis of electric shaver mechanical system using statistical analysis method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdull Azizis, Mohammad Azimin (2022) Development of structure of small scale ROV for educational purposes (service module). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah, Nurfatin Amirah (2022) Sensor durability and calibration of a RTCS based on realtime collection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Samah, Muhammad Azri Hanafi (2022) Effect of machining performance on recycle palm oil waste based material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Zaki, Muhammad Syafiq Syazwan (2022) Design and production of a hot-wire anemometer holder using additive manufacturing method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahamad, Nur Asyrani (2022) Investigation of mechanical behaviour on corn starch. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad, Muhammad Syukri (2022) Effect of laser power and speed on surface quality when engraving on aluminium. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Apandi, Azmirul Hyzain (2022) Conceptual design of smart passive exoskeleton for monitoring localized pressure and postural angle during sitting/standing tasks. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Buni, Najib Shauqi (2022) Process – mechanical properties evaluation of friction stir welding lap joint using aluminium alloy AA6061 workpiece material. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ahmad Soberi, Nur Aqilah (2022) Physical, mechanical and morphological properties of recycled polypropylene reinforced with sugar palm fiber filament. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aja Mohammad Rizal Pahlepi, Aja Sofea Anissa (2022) Evaluation of neem and papaya leaves extract as an eco-friendly corrosion inhibitor for carbon steel in 0.5 M HCl medium. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alwi, Muhammad Haziq Zafrin (2022) Assessment of surface morphology of laser engraved stainless steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amir Hamzah, Luqman Haqim (2022) Development of sandwich sugarcane fiber/polyester resin and aluminium honeycomb panel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anbualagan, Ruttiran (2022) Faulty gear vibration diagnostic and monitoring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anis, Muhammad Fakhrullah (2022) Heat flow analysis on double pass solar air collector using CFD. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Muhamad Raziq Afiq (2022) Development of third brakelight and signal for food panda and grabfood motorcylist. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Nur’ain Nazzeha (2022) Investigation of physical and environmental behaviour on corn starch. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Arumgam, Sritaran (2022) Design and fabricate absorptive muffler to analyse sound transmission loss based on jute fibre using impedance tube. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arumugam, Sasidharan (2022) Tensile properties of HDPE exposed to biodiesel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arumugam, Shurein (2022) Analysis of rover system on productivity and return on investment in agriculture. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Arumugam, Thasarathan (2022) Motorized system trolley with extendable frame. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aw, Seng Ann (2022) Effect of mold design on dimension accuracy of hot-pressed waste tyre derived reclaimed rubber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizi, Siti Nur Amirah (2022) Profiling Malaysian driver style (aggressive and passive). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Muhammad Luqman (2022) Electrical properties of natural rubber reinforced Tin Dioxide Nanocomposites with different filler 98 loading for electrical insulators. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Muhd. Afiq Hafizuddin (2022) Design and development of gold bracelet stamping die. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azman, Nurulain Nabilah (2022) Comprehensive study on 3D scanner method to convert cloud data to surface modeling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azmi, Ainur Natasha (2022) Application of 7QC tools to analyze defect reduction at a remanufacturing company. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Azri, Muhammad Aiman Aqil (2022) An energy analysis of water jet process using random forest method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

B

Badrul Hisham, Siti Aisyah (2022) Development of a lightweight, high strength of flexible structure for underwater sensor holder using Selective Laser Sintering (SLS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baharen, Aizuddin Husaini (2022) Development of ballot bin to reduce cigarette butts wastage. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bakri, Mohamad Syafiq (2022) Design and manufacturing improvement of river trash collecting system (RTCS) scissor lifter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baskaran, Mohan Raj (2022) Study on performance of compact finned heat exchanger using open-cell copper foam. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Chan, Yu Jie (2022) Effect of cryogrinding on surface properties of waste tyre derived reclaimed rubber. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Chandran, Naveen (2022) Analysis of performance and emission on 4-stroke 4-cylinder spark ignition gasoline engine at different air intake temperature. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Asudin, Che Amimi Yasmin (2022) Biodegradable packaging derived from coconut leaf fiber mechanical properties. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Che Hashim, Nik Mohamad Fadzrin Haniff (2022) Analysis on the effect of different parameters towards biodiesel consumption using statistical method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Seman, Muhamad Khairul Azrin (2022) Development of composite material for 3D printing filament using recycled polyethylene terephthalate (PET) reinforced with coconut fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Sukri, Muhammad Syamil (2022) Design and production of a charge couple device (CCD) camera holder for a traverse system using additive manufacturing method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che W Mohd Amil, Che Wan Muhammad Najmi (2022) Evaluation of material failure model in Radioss to roof resistance test (FMVSS 216). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

D

Danabal, Diness Kumar (2022) Effect of cryogrinding on particle size of waste tyre derived reclaimed rubber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Daud, Firdaus (2022) Development of low-cost motorcycle over leaning warning system using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Daud, Mohd Danial Afiq (2022) Development of blind spot system for prime mover truck drivers. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dolah, Nur Nadirah (2022) Preparation and characterization of Tung oil-filled urea-formaldehyde microcapsules and their effect on mechanical properties of an epoxy-based coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

E

Ehyak, Mohamad Farhan Firdaus (2022) Development of squeeze and dying of batik printing system for heritage preservation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Elango, Karrthik (2022) Humidity control and monitoring system for moisture sensitive devices (MSD). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

F

Fahar, Muhammad Fikri (2022) Performance analysis of convolutional neural networks for recognition task of similar industrial machining parts. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

G

Ganasegaran, Yohen (2022) Rice husk ash as heterogeneous catalyst support for conversion of waste cooking oil to biodiesel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ganash, Saartish (2022) Design and fabrication of mini water power generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ganesh, Keshanraj (2022) Design, fabricate and analyse the coconut fibre’s duct silencer for sound transmission loss using impedance tube. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

George, Anthony Belayong (2022) Asset maintenance strategy in spare and replacement for HVAC in oil and gas industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Geris, Brynald (2022) Development of O-ring jig for mechanical testing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

H

Hairizal, Izz Fitri Haikal (2022) Simulation of autonomous driving in following highway lane. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hashim, Muhammad Firdaus (2022) Design smart anti-theft motorcycle mechanical lock using Pugh’s method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hashim, Nur Hazirah Iffah (2022) Research and development of fire resistance door from kenaf core and cement slurry. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Hassan, Muhammad Ariff Imran (2022) Study on impact of various nanofluid types on heat exchanger cooling performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassan Basari, Muhammad Nazirul (2022) Investigation of thermal comfort of selected temporary evacuation center in tropical climate at Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Havit, Cornelius (2022) Development of body structure of small scale ROV for educational purposes. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hazli, Hilal Hazman (2022) Simulation of adaptive cruise control using PID and model predictive controllers. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Henry Sang, Levynia Imas (2022) Solving bottleneck at production line through simulation to enhance productivity at manufacturing company. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Hussain, Rudi Aktar Ali (2022) Effect of laser engraving parameters on surface morphology and quality of low carbon steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

I

Ian William, Darrell Esmund (2022) Evaluating electric boat with outboard engine for fishing vessel. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Ibrahim, Siti Alyaa’ Asyikin (2022) Biodegradable packaging from Napier grass﹕ environment properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Ahmad Syahir (2022) The prototype of water spraying system on the roof by using low-cost Arduino-UNO sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Mohamad Iman (2022) Design and fabricate motor-assist system for fin drive foot pedal kayak. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

J

Jamel, Siti Nur Hidayah (2022) Biodegradable packaging derived from Napier grass ﹕ mechanical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jayagopi, Mageanragopi (2022) Design analysis of intermetallic compound, Ni3Al for automotive industry. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Junus, Ida Najiha (2022) Electrospinning PVA nanofibres study on different physical parameters using factorial design method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

K

Kamarulzaman, Cik Marlissa Maisarah (2022) Mechanical and physical properties of plastic waste mixture in concrete. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kanan, Muhammad Nur Amin (2022) Comparison of MPC controller parameter for autonomous lane change. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kandhian, Krisnan (2022) Development of virtual component technology-based step compliant system. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Khalid, Mohd Faiz (2022) Development and improve of home sand separation machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kussim, Mohd Shafiq Nazri (2022) Development of power module of small-scale ROV for educational purposes. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Layu, Elsee (2022) Study of new green concrete product based on unglazed fired roof tile waste. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Loh, Chi Pei (2022) Parametric and combustion characteristics of diesel and water in oil emulsifier mixture. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M

M Mazlan, Nur Syahirah (2022) Study of wear and friction performance of low – cost commercial engine oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Maarof, Muhammad Syahir (2022) Development of thixo-laser engraving process for pewter product development from recycling tin. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mahid @ Ibrahim, Mohd Fakhrul Hafizuddin Ilman (2022) Improvement design and testing of a prosthetic leg. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Manikam, Viisvan (2022) Development of low-cost portable microscope. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mansi, Muhammad Zulfadhli (2022) Design and fabricate rollover warning device for bus. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Manson, Elston (2022) Study on automation of generating CAD model for automotive part (bumper grille). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Marhalim, Nurul Amirah Aqilah (2022) Acceptance on autonomous vehicle among Malaysians. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mas Kamarulzaman, Mas Ainur Izzati (2022) Portable solar powered charging station. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Masri, Muhammad Anas Farid (2022) Performing new material for lower control arm product vehicle using finite element analysis method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Daud, Muhammad Adam Aiman (2022) Study chair’s design optimization using design for manufacture and assembly method (DFMA). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mat Noor, Nur Faeeza (2022) Design and development of ergonomic hand stand for prolong playing game for smartphones user. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mat Sani, Nurul Najeehah (2022) Development of bio-lubricant from waste Musa Paradisiaca enhanced by crystalized structure of nanoparticles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazlan, Muhammad Hadzim Ashraff (2022) Study on heat transfer and pressure drop characteristics of nanofluid flowing in heat exchanger. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Amir, Hamdan Syakirin (2022) Development of virtual component technology-based CNC system for ISO 6983 data interface model. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Puzi, Muhammad Hazimi Hilmi (2022) Machine monitoring system for three-axis milling machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Muhammad Nazree (2022) Analysis and development of smart gases detector in cabin car. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Nor, Mohamad Najmi (2022) Design and fabricate hand cranked lifter for car roof compartment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Rosli, Muhammad Hafiz (2022) Development of pattern on ceramic surface with parameters manipulation for laser engraving process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Sabri, Mohamad Fahmi Hakim (2022) Study on riverwater effect on mechanical properties of aging FS3300PA SLS material with different coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Sukairi, Mohamad Zahim (2022) Study on body temperature effect towards workers that works in hot ambient by using cooling fan. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Taib, Anis (2022) Optimization of biodiesel production from waste cooking oil using Taguchi method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Zaiddie, Muhammad Iqmal (2022) The application of wasted heat from air conditioner for laundry drying. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Zawawi, Ainuryusra (2022) The strength and hygroscopic study of aging FS3200PA nylon material using SS402P SLS machine for Hydro Quality Survey System (HydroQS) housing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Naim, Ahmad Muzzammil (2022) Modelling and validation of bus ride and handling model. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Salahudin, Muhammad Sadik (2022) Bibliometric analysis & extraction of hydroxyapatite by utilizing calcination method from fish by product for biomedical application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Anas, Nurul Afiqah (2022) Design and development of water bottle by using Kansei Engineering and Kano Model. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Anuar, Mohamad Hazzim (2022) Surface integrity and wear mechanism H13 tool steel machinability assesment. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Baseri, Mohamad Asyraf Aidee (2022) Airflow distribution at different floor level at SMK Bukit Katil act as a temporary evacuation centre. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hasni, Mohamad Afiq Asna (2022) Evaluation of millingtrimming performances for CFRP material utilizing various burrrouter tool geometrical features. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Ishak, Nur Nabilah (2022) Thermal comfort evaluation at three non air conditioned pre school in Melaka using CBE tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Latip, Muhamad Ariffadzilah (2022) Physical, mechanical and morphological properties of recycled polypropylene (PP) reinforced with coconut fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nazri, Mohd Nazrin (2022) Evaluation of the droplet from face mask to indoor social distancing range by using ANSYS fluent. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Salleh, Najmi Abdul Fattah (2022) A preliminary study of porous ceramics with low thermal conductivity for application in buildings. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Sanusi, Muhammad Safwan Arif (2022) Effect of laser engraving parameters on surface morphology and quality of stainless steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sofi, Mohd Nur Iman (2022) Upper airways modelling and validation of mandibular advancement surgery using variable airflow and the effect to wall shear. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sukri, Abdul Muiz (2022) Research on mechanical properties of charcoal coconut shell waste reinforced by epoxy resin. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohd Taufik, Noor Hidayah (2022) Integration of QFD, AHP, and TRIZ for multipurpose bookshelf innovative design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zainuddin, Farhah Zahirah (2022) Using QFD and TRIZ in innovation design at the portable foldable table. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zaki, Nur Alia’a (2022) Design and development of air diffuser using Kansei engineering and Kano model. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zulkifli, Muhammad Azfar (2022) The development of online monitoring system for water consumption in ablution activity considering Malaysian cultural preferences. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Mohmad Sariff, Nurshazni Sahira (2022) Design and analysis of low-cost indoor air quality monitoring device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Moumen, Mahmoud Jazayerli (2022) Optimization of injection molding parameters for 7030 virgin-regrind (PP) plastic material. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Muhamad Jamaludin, Ilman Hakim (2022) Effect of hot chamber parameter on the gas flow in the thermal transpiration pump. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Sukri, Khairiah (2022) Productivity improvement by embedded value stream mapping (VSM) and simulation in assembly manufacturing company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Farid Azizie, Muhammad Farid (2022) Study on wear mechanism and surface integrity of H13 tool steel under dry cutting conditions. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Muhammad Sabri, Muhammad Fikri (2022) Natural fibres and polymers selection with a combination of asphalt mixture based on mechanical and physical properties. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Zulkarnain, Muhammad Amirul Adli (2022) Development of piezoelectric energy harvesting unit for car suspension system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhdar, Muhammad Hairy (2022) Preparation and characterization of linseed oil-filled urea–formaldehyde microcapsules and their effect on mechanical properties of an epoxy-based coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muniyandi, Muhunthaa (2022) Absorptive muffler design based on coconut fiber to analyse sound transmission loss using impedance tube. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Murad, Muhammad Izzul Islam (2022) Design and fabrication of greenhouse’s gutter holder for G.I. pipe frame structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Musa, Muhammad Daniel Hakimi (2022) Improvement of vehicle cabin ventilation detected by alcohol detector device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Musi, Abigail Livan (2022) Development of packaging tray from sugar palm fiber (Mechanical Properties). Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Muslim, Nur Balqish (2022) Developing future gear by optimised internal geometry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

N

Naharanuar, Indah Siti Shoufea (2022) The correlation of microstructure - Surface roughness effect on friction stir welding lap joint using AA6061 aluminium alloy. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Nasarudin, Mohd Amir Azrie (2022) Friction and wear characteristics of biodiesel fuel derived from palm oil. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nazari, Muhammad Amir Danial (2022) Development of mobile clean water supply unit for flood disaster victims. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nazir Ali, Mohamad Nazmeer (2022) IoT based condition monitoring of rotating machinery and predictive maintenance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nik Ebrhiam, Nik Muhammad Faris (2022) Research and development of low-cost vibration monitoring system with Internet of Things (IoT). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Noor Hisham, Muhammad Nabiil (2022) Fabrication a small-scale filtration unit for pre-treated oil sample. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Noor Salleh, Muhammad Ariff (2022) High free fatty acid reduction from Jatropha curcas oil via acid transesterification. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Rizan, Muhammad Jazli (2022) Design and fabricate motor assist bracket for kayak. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nordin, Mohammad Iskandar (2022) Effects of oncoming vehicle size on overtaking judgments from driver automobile. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

P

Padzil, Nur Wardah Sufina (2022) Product design and analysis of bio-inspired 3D printed wrist splint for rehabilitation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

R

Rahim, Muhammad Haafiz (2022) Processability of calcined tin dioxide nanoparticles DPNR (Deproteinized Natural Rubber) through melt compounding method using two roll mill. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Raja Adnan, Raja Muhammad Asyraf (2022) Investigation of temperature variation on thermal ice storage by using propylene-glycol and 100% water. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramli, Haiqal Dzarif (2022) Vibration analysis of cordless impact wrench mechanical system using statistical analysis method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramli, Ruhaida (2022) Design and development ofelectric kettle using Kansei engineering and Kano model. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ravichandran, Tiban (2022) Experimental investigation of the sound absorption coefficient of oil palm waste fiber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Razali, Muhammad Zulqarnain Amin (2022) Physical, mechanical and morphological properties of recycled polypropylene(PP) reinforced with wood dust filament. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roosdi, Roohakimi (2022) Design and analysis of piezoelectric stack module by using numerical finite element models. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roslan, Norfirdaus Azimi (2022) Portable lift wheelchair for disabled people to transferring from wheelchair to car seat by using house of quality. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Aliza Nadira (2022) Study on the extreme pressure (EP) properties of treated WCO with addition of ZDDP vs hBN nanoparticles. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosman, Suhail Azmin (2022) Brake disc material analysis using pin and disc simulation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rozi, Muhammad Ismanajmi (2022) Optimizing the automobile heat extraction control using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S

Saftu, Noor Adilah (2022) Evaluation of curcuma domestica loir and alpinia galanga extract as an eco-friendly corrosion inhibitor for carbon steel in 0.5 M HCl medium. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saharudin, Fahrul Asyraf (2022) Analysis of vibration effect on local exhaust ventilation system using statistical analysis method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saiful, Muhammad Fernanda (2022) Effect of biodiesel production based on zinc oxide supported silica oxide catalyst. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sangar Raj, Saravanan (2022) Stress intensity factor investigation on crack simple I-beam using finite element analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sa’audi, Wahadatul Nur Fati’hah (2022) Fluid-solid interaction modelling and analysis of 45 and 90 degree pipe elbow by using ANSYS. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

See, Wei Che (2022) Simulation and application of nature fiber / epoxy aluminium honeycomb for impact performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sentheran, Kamini (2022) Sustainable of production yield by using attribute statistical process control at manufacturing company. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Shah Rydzuan, Muhamad Izwan (2022) A study of motor bearing vibration using statistical analysis techniques. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamsudin, Muhammad Khairul Amin (2022) Development of novel composite material using recycled polyethylene terephthalate (rPET) reinforced wood dust. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Shamsudin, Shamsu Hazmirull (2022) Environmental properties of biodegradable packaging tray from coconut leaf. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Siva Kumar, Shahrankumar (2022) Development of low-cost oil bath heater”. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sockalingam, Divagaran (2022) Surface characterization of waste tyre derived crumb rubber. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sri Tharan, Piravin Thiran (2022) Faulty bearing vibration diagnostic & monitoring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Stivensone, Valenteno (2022) Multi objective optimization of waste abrasive waterjet on mechanical properties of heat-treated A356 using Greytaguchi method. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Subramaniam, Kuganeswarao (2022) Design of a rest room exhaust ventilation system sensor for odor elimination. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sukumaran, Nanthavan (2022) Development of digital image correlation (DIC) on carbon structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suresh Chandra, Keevanish (2022) Design and development of mini hydropower transmission system. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Syed Mohamad Junus, Syed Mohamad Syafiq (2022) Developing light-weight 3D-printed brake-pad with internal geometry for low friction & wear. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

T

Tajudin, Muhammad Hafizin Arif (2022) Correlation of Charpy impact between welded and unwelded material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Takiudin, Muhammad Farhan Hakim (2022) Study of mechanical characterization on sago starch. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Tan, Zheng Jing (2022) Fuel properties of the biodiesel blends produced from waste cooking oil (WCO). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tang, Lai Ee (2022) Establishment of autonomous maintenance programme to enhance efficiency of EDM machines. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Thambirajah, Tharaneetharan (2022) Alcohol level ignition locking system using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Therusalvam, Poovanes (2022) Performance of turmeric as WCO green printing product. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Tuan Zakaria, Tuan Ismail (2022) Biodiesel production from waste cooking oil (WCO) using potassium hydroxide alkaline catalyst. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

V

Vathanayagam, Angelin (2022) Three-dimensional anthropometry study with 3D CAS and Catia software measurement on human’s head. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

W

Wan Azir, Wan Muhammad ‘Afif (2022) Computational fluid dynamics analysis of Perodua Axia body with several types of spoiler. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Ignatius Loke Wei (2022) Development of new model low friction bearing with optimize geomatry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Y

Yahaya, Khairol Akmal (2022) Development of exhaust gas leak detector tool by using compress air and smoke method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yusdianto, Muhammad Firdaus (2022) The prototype design of vehicle carbon monoxide detector (VECOD) with a low-cost sensor using Arduino UNO as a platform. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Z

Zabidi, Mohamad Nazaem (2022) Simulation of drag-type-spherical in-pipe turbine at various velocities and pressures conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zahfarsham, Muhammad Asyraf (2022) Design and fabrication of mini machine mixer for cement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainal Abidin, Muhammad Zikri Hafiz (2022) On-road testing performance of air conditioning system based on pre-setting climate control ambience. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainudin, Muhammad Hilmi (2022) Extraction of hydroxyapatite using calcination method from waste fish bones for biomedical application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zolkeflee, Nadiah (2022) Design and development of air freshener’s casing by using Kansei engineering and Kano model. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Zucafly, Anis Soraya (2022) Pattern quality analysis when laser engraving illustration on stainless steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkeflay, Nurul Afiqah (2022) The study of physical & environmental characterization on sago starch. Project Report. Melaka, Malaysia, Universiti Teknikal Malaysia Melaka. (Submitted)

Zulkefli, Nur Ainani Amalia (2022) Effect of polyamide 12 mechanical properties behavior of selective laser sintering machine in automotive industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zusdi, Muhammad Aisamuddin Syahmi (2022) Impact analysis of motorcycle helmet using finite element method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)