Items where Division is "Library > Final Year Project > FKP" and Year is 2019

A

Abd Ghani, Anis Aqilah (2019) Optimization Of Processing Parameters To Maximize The Physical And Mechanical Properties Of Natural Rubber Composites For Engine Mount. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nurul Hidayah (2019) Effect Of Sintering Temperature And Soaking Time On Microstructure And Mechanical Properties Of Alumina-Chromia Cutting Tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Halim, Muhammad Firdaus (2019) Improvement Of Hygienic Urinal System Using Integrated Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razim, Rozieani (2019) Investigating The Effect Of Upper Arm Postures On The Hand Grip Strength Requirement For Female Malaysian Young Adult. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Zarin, Muhamad Syahmi (2019) Optimization Of Product Architecture By Using Design For Manufacture And Assembly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abullais, Fairil (2019) Simultaneous Assessment System Of Work Posture And Muscle Activity For Manual Materials Handling Tasks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Fatin Atiqah (2019) Improving SMED Process At Milling Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Norsyafiqah (2019) Investigation On Single Fibre Strength From Reclaimed Carbon Fibre (rCF) For Secondary Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Agus Salim, Muhammad Aizat Afiq (2019) Ergonomic Analysis In Improving The Process Of Assembling Woven Bags. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Aina Syuhada’ (2019) Characterization Of Feedstock Powder With Different Morphology For Plasma Sprayed Titania Coating. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Faris Afiq (2019) Impact Of Tool Features On The Quality Of Weld In BFSW Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fuzi, Hawa (2019) Investigation On Mechanical Properties Of Reclaimed Nonwoven Carbon Fiber Composite For Secondary Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ajid, Abdul Aziz (2019) Design Improvement Of The Heating Oven For Honeycomb Core Forming Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Akasak, Nurul Syazwani (2019) Statistical Analysis Of Repetitive Repair Welding Using GMAW On Stainless Steel Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alexander Samuel, Nick Mathews (2019) Development Of 6-Axis Robot Arm For TVET Training. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Siti Nur Wafa (2019) Development Of Roll Pineapple Tart Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Ke Xin (2019) Energy And Economic Assessment Of Using Temperature Controller In Air-Conditioned Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Nik Nur Amiera (2019) Preparation And Characterization Of Nanocellulose Derived From Waste Office Paper Prepared By Acid Hydrolysis Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azhar, Muhammad Aiman (2019) Preparation And Characterization Of PP/rPP Blends At Different Formulation Ratio By Injection Moulding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan, Muhammad Afiq (2019) Design And Development Of Square Hole Digging Ground Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Muhamad Ashraf (2019) Mechanical Properties And Fracture Behaviour Of Green Innovative Glass (GIG) Made From Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Bahari, Mohamad Zakuwan (2019) Design And Development Of Assistive Device For Tenodesis Rehabilitation People. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Basri, Syahrul Zhafri (2019) Study Of Thermal Effect On Viscosity And Surface Tension Of Metalworking Fluids. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

C

Cheah, Di Quan (2019) Development Of Remote Monitoring And Control Of Keyless Entry System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, Lin Yi (2019) Tensile And Damping Properties Of Graphene Nanoplatelets/Carbon Blacks Filled Chloroprene Rubber Nanocomposite For Engine Mounting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Ke Chin (2019) Synthesis And Characterization Of Al2O3 Added Fe3O4 Nanoparticles Via Sol Gel Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choong, Kai Yuen (2019) Implementation Of Critical To Quality In Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

Embok Resa, Mohammad Afif (2019) Optimizing The Changeover Of Pressure Die Casting Machine By Implementing Single Minute Exchange Of Die. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eng, Qian Hui (2019) Electrodeposition Of Copper Chromium (Cu-Cr) Alloy On Fe Substrate In Deep Eutectic Solvent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Evelyn, Justin (2019) An Investigation On Products Selection For Recycling Using Product Recycling Desirability Model At Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fadhil, Fatin Nur Syahirah (2019) Formation Of Titanium Dioxide Nanotubes Via Two-Step Anodization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizal, Muhammad Faiz Rahimi (2019) Characterization And Analysis On The Quality Of The Anode Material Of Used Low Voltage Lithium Ion Battery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong, Zuyang (2019) Enhancement Of Robot Haptic Sensor Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

Ghafar, Mohamad Aliff (2019) Determination Of Mechanical Properties For Light Weight Engine Mount Housing Using Carbon Nanotube Aluminium Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hasan, Nur Liyana (2019) Determine The Effect Of Chemical Treatment To The Mechanical Properties Of Parts Produced Using FDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Heng, Benny Ek Ming (2019) Drilling Of Titanium Alloy Using Hybrid Nanofluid Coolant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Heng, Wei Zuan (2019) Multi Objectives Performance Optimisation Of Ultrasonic Assisted Drilling Parameter For Gorilla Glass: Parameters Investigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Su Jen (2019) Feasibility Study Of Remotely Monitored And Controlled Soil Moisture Based Irrigation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husshini, Nur Husnina Najeah (2019) Grinding Of Mild Steel With Inclusion Of Quarry Dust Microparticles In The Coolant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Ismail, Muhammad Adib (2019) Mould Flow Analysis Based Product Development For Plastic Injection Moulding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Jamalluddin, Nor Asyiqien Atilah (2019) Effect Of Temperature And Concentration Of Urea Solution In Urea Impregnation Process Into Biochar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Khor, Huai Khang (2019) Investigation Of Phosphate Type Accelerator (Zinc O, O-Dibutylphosphorodithioate,ZBPD) And Silane (BIS(Triethoxysilylpropyl)Tetrasulfide, TESPT) Effect On The Physical And Mechanical Prope. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kua, Ann Nee (2019) Overall Equipment Effectiveness Decision Support Tool For Lean Practitioners. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kunyahamu, Siti Nur Syazwani (2019) Design And Performance Evaluation Of An Off-Grid Solar System For Small Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kursus @ Othman, Maisarah (2019) Milling On Titanium Alloy Using Hexagonal Boron Nitride (hBn) Nanofluid As A Coolant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

L

Lau, Carolyn Yee Jie (2019) The Effect Of Heat Treatment Schedule On Mechanical Properties Of Different Carbon Nanotubes Contents In Aluminium Alloy Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Sie Lin (2019) Investigation On Properties Of Reclaimed Carbon Composite For Assistive Tenodesis Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Ren Xie (2019) Ergonomic Design Of Adjustable Height Standing Platform For Manual Milling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yong Sheng (2019) Selection Of Best Plant Maintenance Strategy Using Analytic Hierarchy Process(AHP), TOPSIS-AHP And Fuzzy-AHP. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Yoong Ler (2019) Design And Analysis Of Food Container In Plastic Injection Molding Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Eu Sheng (2019) Development Of Standard Time In Die Bond Process : A Case Study In A Semiconductor Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Qin Jing (2019) Characterization And Mechanical Testing Of Waste Tire Dust Modified Bitumen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Yan Ying (2019) Electrodeposition Of Nickel Aluminide Based Alloy On Fe Substrate In Deep Eutectic Solvent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Yong Hock (2019) The Optimization Of Laser Machining Parameters For Hole Cutting Of Stainless Steel Using RSM Approaches. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lin, Wei Qi (2019) Effect Of Nano Cellulose Industrial Tea Leaf Fiber On The Physical And Mechanical Properties Of Polylactic Acid (PLA) Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M

Malaya, Nur Iylia (2019) Productivity Improvement Through Work Standardisation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md.Nor Hayati, Norilani (2019) Service Quality Evaluation Of University Facility By Using Kano Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mesri, Masturah (2019) Curing Characteristics And Mechanical Properties Of Styrene Butadiene Rubber (SBR) Filled With Industrial Waste Derived Ashes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Marina (2019) Characterization Of TiO2 Coating Prepared By Thermal Spray Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Isa, Fatin Nurdiyana (2019) Line Balancing Of Pressure Relief Valve (PRV) Assembly Process For Enhancing Producivity And Efficiency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nor, Mohamad Luqman (2019) Design Of Self-Tuned PID Controller For Linear Direct Drive System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shahrul Naim, Saidin (2019) Development Of Resistive Sintering Furnace For Sintering Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammad Ali, Nur Fatihatur Rawdhah (2019) Formulation Of Green Printing Ink From Waste Cooking Oil For Digital Printing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Haniff, Imanina (2019) Cyclic Voltammetry And Charge/Discharge Analyses Of Asymmetric Supercapacitor Based On Graphene/MoS2 And Graphene Electrodes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi, Nur Ain Nazihah (2019) Influence Of Clay Content On Mechanical Properties Of Clay-Polymer Composites For Roof Tiles Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Faizairi, Muhammad Faiq Aqil (2019) The Effect Of Ni-TiO2 Coating On Different Substrates. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazil, Mohammad Hanis (2019) Overall Equipment Effectiveness Improvement Through Single Minute Exchange Of Die Implementation: A Case Study On Stamping Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fuzi, Muhammad Zahid (2019) Lean Tools Application For Productivity Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hizul Azri, Syahidatul Fatimah An-Nur (2019) Investigation Of The Heat Treatment Process To The Adhesion Of Graphene On Copper Foil For Prismatic Graphene Supercapacitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Husni, Mawaddah Haslyanti (2019) Investigation Of Muscle Fatigue For Problematic Feet Using EMG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Isa, Nur Farah Adlia (2019) Design And Development Of Recycle Plastic Wall Panel Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Raman, Fazrin Khalilah (2019) Optimization Of Laser Cutting Parameters On Surfaced Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusoff, Nur Sabrina (2019) Comparison Of Two Seats Design In Terms Of Postural Discomfort And Pressure Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zali, Amirah Nasiha (2019) Ergonomics Study Of Working Posture In Assembly Process At SME Manufacturing Company (Standing). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mortadza, Siti Fatimah Khadijah (2019) Multiblock Generation For Hexahedral Meshing Of Irregular Profile. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Azamuddin, Alia Amira (2019) Mechanical Properties And Optimization TIG Weld Parameters On Aluminium Alloy 5052. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Danial Azraei, Azlan (2019) Fabrication Of Alumina-Copper Composites By Using Resistive Sintering Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Musazali, Mussyahirah (2019) Development Of Overall Equipment Effectiveness (OEE) In Casting Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Nablan, Muhammad Amirullah (2019) Achieving Work Balance Through Simulation Modelling And Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nadzri, Zaty Zhafarina (2019) Characterization And Mechanical Testing Of Elastomer Modified Bitumen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Siew Xing (2019) Synthesis And Characterization Of K₀.₅Na₀.₅NbO₃ Thin Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Xin Ni (2019) Ergonomics Risk Assessment On Manual Material Handling Tasks For UTeM Pembangunan Staff. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Aslan, Nur Amirah (2019) Weld Quality Comparison Between Fusion Welding And Solid State Welding On AA1100. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhaminudin, Nurul Shaqirah (2019) Investigation Of Fatigue Behaviour Of Pineapple Leaf Fiber Reinforced Polylactic Acid Composited. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

O

Omar, Muhammad Azim (2019) Preparation And Characterization Of PANI / GNPs Nanocomposites For Flexible Wearable Textile Antenna Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

P

P. Manickavelu, Gogulan (2019) The Investigation Of GMAW Process Variables On Lap Joint Of Aluminium Alloy 5083. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Pahorudin, Nor Aisyah (2019) Investigation Of Machining Cost Modelling Based On Product Drawing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pheng, Syie Chie (2019) Investigation Of Motion Analysis For Productivity Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Puteh, Nur Syakirah (2019) Influence Of Ball To Powder Ratio And Heat Treatment Process On The Properties Of Electrodeposited Nickel-Quarry Dust Composite Coating. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Ramlee, Naim A'imullah (2019) Establishment Of Value Stream Mapping (VSM) Of Balloon Production. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Razid, Nor Atirah (2019) Effect Of Surface Treatment On Pineapple Leaf Fibre (PALF) And Its Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosdie, Mohd Said (2019) Corrosion Behaviour Of Mild Steel Coated With Epoxy-PANi-Phosphorus Thin Film In 3.5 WT Percent NaCl Solution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Muhammad Alif Haziq (2019) Design And Development Of A Control System For A 4 Wheel Skid Steering Mobile Robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Nurwahida (2019) Toolpath And Holes Accuracy Of Robotic Machining For Drilling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosman, Muhammad Rafiq (2019) Multi Objectives Performance Optimisation Of NR/EPDM For Compression Molding Process: Parameters Investigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rostam, Nur Ayuni (2019) Effect Of Sintering Temperature And Soaking Time On Microstructure And Mechanical Properties Of Alumina- Zirconia Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

Salleh, Effi Nur Shazleen (2019) Effect Of Matrix Ductility On The Properties Of Pineapple Leaf Fibre Reinforced Poly Lactic Acid Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samat, Anis Hazirah (2019) Investigation On Mechanical And Thermal Properties Of 100% Recycled 3D Printed ABS Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shafie, Masitah (2019) Influence Of Ultrasonic Amplitude And Saccharin Content On The Properties Of Electrodeposited Nickel-Quarry Dust Composite Coating. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sim, Yiew Yiew (2019) Investigation Of Mechanical Properties Of Recycled ABS Printed With Open Source FDM Printer Integrated With Ultrasound Vibration. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Soh, Shi Ling (2019) Development Of Ankle Orthosis For Ankle Injury Prevention. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sothi, Laavanya (2019) A User Acceptance Of Chemical Management System (CMS) Using Kansei Engineering. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

T

Tajry, Mohammad Hafifi (2019) Study On Pile Machine To Improve The Construction Process Of Fakulti Kejuruteraan Pembuatan, UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Ing Yuh (2019) Improving Rubber-To-Metal Bonding Through The Use Of Silane Coupling Agent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Joe Yee (2019) The Effect Of Lateral Lifting Tasks On Hand Grip And Pinch Strength Measurements. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Siew Chen (2019) Disturbance Force Suppression In Linear Motor Drive System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

V

Vellasamy, Yuwendran (2019) The Effect Of Bobbin Friction Stir Welding Repetition Process On The Microstructure Of The Aluminium Alloy 1100. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wan Omar, Wan Mohamad Syarifudin (2019) Synthesis Of Indium Zinc Oxide Via Sol Gel Method As Conductive Filler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Saharuddin, Wan Nurulhezaty (2019) Performance Of Copper Tungsten Electrode On Aluminium Alloys LM6 In Die Sinking Using Full Factorial Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Meng Meng (2019) Surface Modification Of Aluminium By Graphene Nanofiller Impregnation For Rubber-Aluminium Bonding System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Pui Kei (2019) Feasibility Study Of Adoption Pulsation Coolant On Cutting Force During End Milling Aluminium 6061. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yahya, Amirudin (2019) Investigation Of Hot Press Quenching On Hardness And Microstructure For High Strength Boron Steel. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yuza, Nor Aqilah (2019) The Effect Of Copper (Cu) Electroplating Parameters On Copper Vertical Interconnect Access (VIA) Filling For Printed Circuit Board (PCB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zahid, Muhammad Zulhilmi Aidil (2019) Control System Design Of An Externally Guided Vehicle To Follow A Predetermined Path. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Abidin, Siti Nuradibah (2019) Surface Modification Of Mild Steel Using Powder Metallurgy (PM) CU Electrode. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainan, Muhammad Syazwan (2019) Design Of Pick And Place Mechanism For 3D PCB Assembly Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Nurul Sabrina Syarfa (2019) Design And Analysis On New Mechanism Of Slipway Cradle For Alkahfi Asura Crew Boat. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zamree, Afif Fahmi (2019) 5’S Decision Support System For Lean Practitioners. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamri, Azzlyn Zurain (2019) Effect Of ZnO Nanowhiskers On The K0.5Na0.5NbO3 Thin Film Via The Hybrid Sol Gel Route. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zamri, Fazzuan (2019) Kinamatic Study Of 6 Degree Of Freedom Robot Based On Stepper Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkefle, Zulaikha (2019) Tensile Properties Analysis By Simulation And Experiment Of Thin Sheet Plate Welded By GMAW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Nor Syazana Adilah (2019) Study On CaCO₃ Mineral Filler Loading Effects Into SiR/CaCO₃ Based Composite As Dielectric Resonator For 5G Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zunaide, Mohamad Norezwan (2019) Analysis On Cutting Tool Performance In Milling Inconel 718 Under Minimum Quantity Lubrication (MQL) And Pulsation Lubrication System (PLS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)