Items where Division is "Library > Final Year Project > FKP" and Year is 2012

A

Abd Rami, Ainun Zuhairah (2012) Development Of Automatic Vibration Prediction System Of Robotic Arm Structure By Using Analysis Of ANSYS. Project Report. UTeM, Melaka. (Submitted)

Amira, Sahari (2012) Time Study Method Implementation At Jecmetal Industries Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Chan, Yun Kim (2012) INTEGRATING QUALITY TOOL ON IMPROVING OVERALL EQUIPMENT EFFICIENCY IN AUTOCLAVE PROCESS: CASE STUDY. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Shi Hui (2012) An Application Of Linear Programming In Aggreate Planning A Case Study At Electronic Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Faisal Faris, Rahim (2012) Optimization Of Mixing Parameters To Produce PP - Enr Blend Via Response Surface Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Md. Lazi (2012) Cost Saving Campaign. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fevilia Nurnadia, Andria Syaifoel (2012) The Gap Analysis Measurement Of Linear Vs Non-Linear Parametric On Costemer Satification Based On Importance Performance Analysis And Kano Method In Service Industries(Hotel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Halis, Hanifi (2012) Productiviti Improvement In Manufacturing Industry. Project Report. UTeM, Melaka< Malaysia. (Submitted)

Harizah , Ideris (2012) HIRARC Assesment Of Machining Processes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Intan Fatihah , Ahmad (2012) Impact Of Meeting Quality And Delivery On Customer Satisfaction For A Metal Based Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Intan Liyana, Ismail (2012) Manufacturing Process Selection For Automotive Bumper Fascia Using Analytical Hierarchy Process (AHP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzuan, Ahmad (2012) The Error Compensation Strategy Using Step Approach For Machining Thin-Wall Low Rigidity Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Juliana, Yaakub (2012) Reclamation Of Aerospace-Grade Carbon Fibre Prepreg Waste Through Second Impregnation Of Thermoset Polymer Via Hand Lay-Up Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Khairun Nazihah , Khalid (2012) Corrosion Behavior Of TiAIBN, TiN And AIN Coating Produced By Magnetron Sputtering On Magnesium Substrate (Using Hank's Solution). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kueh , Florence Hui Na (2012) Hardness Variation Of Heat Treated Layer-By-Layer Deposited Nickel Based Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kwan, Chin Seng (2012) Optimization Of Machining Parameters In Wire EDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lem , Zhi Xian (2012) Assessment Of The Hand Grip Strength And Hand Injuries For UTeM Sportsperson. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lem , Zhi Xian (2012) Evaluation Of CMM's Uncertainty By Using Excel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loo, Kin Hoe (2012) Six Sigma Dmaic Implementation At Manufacturing Company. Project Report. UTeM, Melaka Malaysia. (Submitted)

M

Mohamad Zarul, Drahman (2012) Processability And Characteristic Of Thermoplastic Reinforced Comminution For Out Of Condition Aerospace Grade Carbon Fiber Prepreg Waste Via Melt Compounding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ariff, Ahmad (2012) Analysis And Design Mechanism Of Supporting Cantas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faqrul Lazzi, Zarin (2012) Study Of Dc Bus Instability With Constant Power Load. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmie, Asnan (2012) Strategy For Milling Thin-Wall Low Rigidity Curve Shape Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khuzaimi, Mohd Salleh (2012) Processability And Compatibility Analysis Of Thermoplastic Elastomer Filled Reclaimed Rubber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Norazzim, Mohd Hashim (2012) New Cutter Design To Minimize Part Deflection In Machining Thin Wall Low Rigidity Component. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mohd Safuan, Anuar (2012) Development Of Hydroxyapatite/Chitosan Composite Powder Via Mechanical Milling Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaidan, Abdul Aziz (2012) Electrosynthesised NiSe2 Thin Films For Photoelectrochemical (PEC) Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhilmi, Ismail (2012) Appliction Of Value Stream Mapping (VSM) In Cable Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faisal, Musa (2012) Development Of Differential Steering System For A Microcontroller Based Motorized Walking Aid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz , Mohd (2012) Physical Characterization Of Urea-Lignin Fertilizer Granule. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yazuan , Yaakup (2012) Physical Characterization Of Urea Binder Extrude At Various Weight Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zaid, Saleh (2012) Tool Path Compensation Strategy For Machining Thin Wall Low Rigidity Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa , Juman (2012) STUDY ON MACHINE PERFORMANCE FOR PRODUCTIVITY IMPROVEMENT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Nermie, Dickson (2012) The Effect Of Primary Relief Angle To The Dimensional Surface Error Of Thin-Wall Components. Project Report. UTeM, Melaka. (Submitted)

Nik Nurfathi Nadia, Nik Mustaffa (2012) Tool Wear Prediction By Measuring Cutting Force. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Adibah, Mat Isa (2012) The Effect Of Phenolic Resin And Hardener Percentage On Mechanical Properties And Loss On Ignition Resin Bonded Sand Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Rawaida , Omar (2012) Redesign Of Perforator Through Integration Of Ergonomics Approach And Quality Function Deployment (QFD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Adilia , Abd Latif (2012) Curves And Surface Modeling : A Case Of Truck Wind Deflector Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhidayah, Ramli (2012) Programmable Socket Using Pic Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hazirah, Mohamad Nasir (2012) Application Of Value Stream Mapping In The Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Nadia Ramadhani, Md yusuf (2012) Production Operating System A Case Study Of Make To Stock And Make To Order System. Project Report. UTeM, Melaka Malaysia. (Submitted)

nurul Syuhada, Che Hussin (2012) Implimentation Of Poka Yoke Through DFMEA Stage For Sme Industry In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

Razif, Mudzlan (2012) The Performance Analysis Of High Speed Steel Tool In High Speed Drilling. Project Report. UTeM, Melaka. (Submitted)

Roslan, Rozalina (2012) Development Of Control Panel For Aristo Arm Robot. Project Report. UTeM, Melaka. (Submitted)

S

Salasiah, Zakaria (2012) Chemical Safety And Risk Assessment In A Manufacturing Environment. Project Report. UTeM, Melaka Malaysia. (Submitted)

Salihah, Yaakub (2012) Design And Analysis Of Gripper Mechanism For Egg Handling Robot Manipulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nor Salihah, Mohamad (2012) Jet Fighter (Typhoon) Laser Cutting Project. Project Report. UTeM, Melaka. (Submitted)

Siti Nur Madihah , Apandi (2012) Design And Analysis Of Casting Valve For High Voltage ABC Dead End Clamp By Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Tan, Teng Teng (2012) Mechanical And Physical Properties Of Sandwich Structures Made From Chopped Strand Mat Coconut Fiber Filled With Polyurethane Foam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wong , Yun Shi (2012) Quick Response Manufacturing (QRM) In Job Shop Environment. Project Report. UTeM, Melaka Malaysia. (Submitted)

Z

Zull Azmi , Jamaludin (2012) Thermal Comfort Assesment In Manufacturing Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)